summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/sunxi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/sunxi.c')
-rw-r--r--drivers/usb/musb/sunxi.c54
1 files changed, 34 insertions, 20 deletions
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index fdab4232cfbf..76500515dd8b 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -80,7 +80,8 @@ static struct musb *sunxi_musb;
struct sunxi_glue {
struct device *dev;
- struct platform_device *musb;
+ struct musb *musb;
+ struct platform_device *musb_pdev;
struct clk *clk;
struct reset_control *rst;
struct phy *phy;
@@ -102,7 +103,7 @@ static void sunxi_musb_work(struct work_struct *work)
return;
if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) {
- struct musb *musb = platform_get_drvdata(glue->musb);
+ struct musb *musb = glue->musb;
unsigned long flags;
u8 devctl;
@@ -112,7 +113,7 @@ static void sunxi_musb_work(struct work_struct *work)
if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) {
set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
musb->xceiv->otg->default_a = 1;
- musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
MUSB_HST_MODE(musb);
devctl |= MUSB_DEVCTL_SESSION;
} else {
@@ -145,10 +146,12 @@ static void sunxi_musb_set_vbus(struct musb *musb, int is_on)
{
struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
- if (is_on)
+ if (is_on) {
set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
- else
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ } else {
clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
+ }
schedule_work(&glue->work);
}
@@ -264,15 +267,6 @@ static int sunxi_musb_init(struct musb *musb)
if (ret)
goto error_unregister_notifier;
- if (musb->port_mode == MUSB_PORT_MODE_HOST) {
- ret = phy_power_on(glue->phy);
- if (ret)
- goto error_phy_exit;
- set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
- /* Stop musb work from turning vbus off again */
- set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
- }
-
musb->isr = sunxi_musb_interrupt;
/* Stop the musb-core from doing runtime pm (not supported on sunxi) */
@@ -280,8 +274,6 @@ static int sunxi_musb_init(struct musb *musb)
return 0;
-error_phy_exit:
- phy_exit(glue->phy);
error_unregister_notifier:
if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
@@ -323,10 +315,31 @@ static int sunxi_musb_exit(struct musb *musb)
return 0;
}
+static int sunxi_set_mode(struct musb *musb, u8 mode)
+{
+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+ int ret;
+
+ if (mode == MUSB_HOST) {
+ ret = phy_power_on(glue->phy);
+ if (ret)
+ return ret;
+
+ set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
+ /* Stop musb work from turning vbus off again */
+ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ }
+
+ return 0;
+}
+
static void sunxi_musb_enable(struct musb *musb)
{
struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+ glue->musb = musb;
+
/* musb_core does not call us in a balanced manner */
if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags))
return;
@@ -569,6 +582,7 @@ static const struct musb_platform_ops sunxi_musb_ops = {
.exit = sunxi_musb_exit,
.enable = sunxi_musb_enable,
.disable = sunxi_musb_disable,
+ .set_mode = sunxi_set_mode,
.fifo_offset = sunxi_musb_fifo_offset,
.ep_offset = sunxi_musb_ep_offset,
.busctl_offset = sunxi_musb_busctl_offset,
@@ -721,9 +735,9 @@ static int sunxi_musb_probe(struct platform_device *pdev)
pinfo.data = &pdata;
pinfo.size_data = sizeof(pdata);
- glue->musb = platform_device_register_full(&pinfo);
- if (IS_ERR(glue->musb)) {
- ret = PTR_ERR(glue->musb);
+ glue->musb_pdev = platform_device_register_full(&pinfo);
+ if (IS_ERR(glue->musb_pdev)) {
+ ret = PTR_ERR(glue->musb_pdev);
dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret);
goto err_unregister_usb_phy;
}
@@ -740,7 +754,7 @@ static int sunxi_musb_remove(struct platform_device *pdev)
struct sunxi_glue *glue = platform_get_drvdata(pdev);
struct platform_device *usb_phy = glue->usb_phy;
- platform_device_unregister(glue->musb); /* Frees glue ! */
+ platform_device_unregister(glue->musb_pdev);
usb_phy_generic_unregister(usb_phy);
return 0;
OpenPOWER on IntegriCloud