6 files changed, 197 insertions, 62 deletions

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 14b760209680..2b9e4ca3c932 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -40,6 +40,7 @@
 /* Global constants */
 #define DWC3_PULL_UP_TIMEOUT	500	/* ms */
 #define DWC3_ZLP_BUF_SIZE	1024	/* size of a superspeed bulk */
+#define DWC3_BOUNCE_SIZE	1024	/* size of a superspeed bulk */
 #define DWC3_EP0_BOUNCE_SIZE	512
 #define DWC3_ENDPOINTS_NUM	32
 #define DWC3_XHCI_RESOURCES_NUM	2
@@ -724,6 +725,7 @@ struct dwc3_hwparams {
  * @epnum: endpoint number to which this request refers
  * @trb: pointer to struct dwc3_trb
  * @trb_dma: DMA address of @trb
+ * @unaligned: true for OUT endpoints with length not divisible by maxp
  * @direction: IN or OUT direction flag
  * @mapped: true when request has been dma-mapped
  * @queued: true when request has been queued to HW
@@ -740,6 +742,7 @@ struct dwc3_request {
 	struct dwc3_trb		*trb;
 	dma_addr_t		trb_dma;
 
+	unsigned		unaligned:1;
 	unsigned		direction:1;
 	unsigned		mapped:1;
 	unsigned		started:1;
@@ -857,12 +860,14 @@ struct dwc3_scratchpad_array {
 struct dwc3 {
 	struct usb_ctrlrequest	*ctrl_req;
 	struct dwc3_trb		*ep0_trb;
+	void			*bounce;
 	void			*ep0_bounce;
 	void			*zlp_buf;
 	void			*scratchbuf;
 	u8			*setup_buf;
 	dma_addr_t		ctrl_req_addr;
 	dma_addr_t		ep0_trb_addr;
+	dma_addr_t		bounce_addr;
 	dma_addr_t		ep0_bounce_addr;
 	dma_addr_t		scratch_addr;
 	struct dwc3_request	ep0_usb_req;
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index e956306d9b0f..1515d45ebcec 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -128,10 +128,8 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 	clk_prepare_enable(exynos->clk);
 
 	exynos->susp_clk = devm_clk_get(dev, "usbdrd30_susp_clk");
-	if (IS_ERR(exynos->susp_clk)) {
-		dev_info(dev, "no suspend clk specified\n");
+	if (IS_ERR(exynos->susp_clk))
 		exynos->susp_clk = NULL;
-	}
 	clk_prepare_enable(exynos->susp_clk);
 
 	if (of_device_is_compatible(node, "samsung,exynos7-dwusb3")) {
@@ -290,7 +288,6 @@ static struct platform_driver dwc3_exynos_driver = {
 
 module_platform_driver(dwc3_exynos_driver);
 
-MODULE_ALIAS("platform:exynos-dwc3");
 MODULE_AUTHOR("Anton Tikhomirov <av.tikhomirov@samsung.com>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("DesignWare USB3 EXYNOS Glue Layer");
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index eb1b9cb3f9d1..2092e46b1380 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -426,20 +426,20 @@ static int dwc3_omap_extcon_register(struct dwc3_omap *omap)
 		}
 
 		omap->vbus_nb.notifier_call = dwc3_omap_vbus_notifier;
-		ret = extcon_register_notifier(edev, EXTCON_USB,
-						&omap->vbus_nb);
+		ret = devm_extcon_register_notifier(omap->dev, edev,
+						EXTCON_USB, &omap->vbus_nb);
 		if (ret < 0)
 			dev_vdbg(omap->dev, "failed to register notifier for USB\n");
 
 		omap->id_nb.notifier_call = dwc3_omap_id_notifier;
-		ret = extcon_register_notifier(edev, EXTCON_USB_HOST,
-						&omap->id_nb);
+		ret = devm_extcon_register_notifier(omap->dev, edev,
+						EXTCON_USB_HOST, &omap->id_nb);
 		if (ret < 0)
 			dev_vdbg(omap->dev, "failed to register notifier for USB-HOST\n");
 
-		if (extcon_get_cable_state_(edev, EXTCON_USB) == true)
+		if (extcon_get_state(edev, EXTCON_USB) == true)
 			dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
-		if (extcon_get_cable_state_(edev, EXTCON_USB_HOST) == true)
+		if (extcon_get_state(edev, EXTCON_USB_HOST) == true)
 			dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
 
 		omap->edev = edev;
@@ -528,17 +528,13 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	ret = of_platform_populate(node, NULL, NULL, dev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to create dwc3 core\n");
-		goto err2;
+		goto err1;
 	}
 
 	dwc3_omap_enable_irqs(omap);
 	enable_irq(omap->irq);
 	return 0;
 
-err2:
-	extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
-	extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
-
 err1:
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
@@ -550,8 +546,6 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 {
 	struct dwc3_omap	*omap = platform_get_drvdata(pdev);
 
-	extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
-	extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
 	dwc3_omap_disable_irqs(omap);
 	disable_irq(omap->irq);
 	of_platform_depopulate(omap->dev);
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 9bb1f8526f3e..e689cede9b0e 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -1123,7 +1123,21 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 		dwc->ep0state = EP0_STATUS_PHASE;
 
 		if (dwc->delayed_status) {
+			struct dwc3_ep *dep = dwc->eps[0];
+
 			WARN_ON_ONCE(event->endpoint_number != 1);
+			/*
+			 * We should handle the delay STATUS phase here if the
+			 * request for handling delay STATUS has been queued
+			 * into the list.
+			 */
+			if (!list_empty(&dep->pending_list)) {
+				dwc->delayed_status = false;
+				usb_gadget_set_state(&dwc->gadget,
+						     USB_STATE_CONFIGURED);
+				dwc3_ep0_do_control_status(dwc, event);
+			}
+
 			return;
 		}
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 204c754cc647..4db97ecae885 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -833,29 +833,14 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
 
 static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep);
 
-/**
- * dwc3_prepare_one_trb - setup one TRB from one request
- * @dep: endpoint for which this request is prepared
- * @req: dwc3_request pointer
- */
-static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
-		struct dwc3_request *req, dma_addr_t dma,
-		unsigned length, unsigned chain, unsigned node)
+static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
+		dma_addr_t dma, unsigned length, unsigned chain, unsigned node,
+		unsigned stream_id, unsigned short_not_ok, unsigned no_interrupt)
 {
-	struct dwc3_trb		*trb;
 	struct dwc3		*dwc = dep->dwc;
 	struct usb_gadget	*gadget = &dwc->gadget;
 	enum usb_device_speed	speed = gadget->speed;
 
-	trb = &dep->trb_pool[dep->trb_enqueue];
-
-	if (!req->trb) {
-		dwc3_gadget_move_started_request(req);
-		req->trb = trb;
-		req->trb_dma = dwc3_trb_dma_offset(dep, trb);
-		dep->queued_requests++;
-	}
-
 	dwc3_ep_inc_enq(dep);
 
 	trb->size = DWC3_TRB_SIZE_LENGTH(length);
@@ -900,11 +885,11 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 	if (usb_endpoint_dir_out(dep->endpoint.desc)) {
 		trb->ctrl |= DWC3_TRB_CTRL_CSP;
 
-		if (req->request.short_not_ok)
+		if (short_not_ok)
 			trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 	}
 
-	if ((!req->request.no_interrupt && !chain) ||
+	if ((!no_interrupt && !chain) ||
 			(dwc3_calc_trbs_left(dep) == 0))
 		trb->ctrl |= DWC3_TRB_CTRL_IOC;
 
@@ -912,7 +897,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 		trb->ctrl |= DWC3_TRB_CTRL_CHN;
 
 	if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
-		trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id);
+		trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(stream_id);
 
 	trb->ctrl |= DWC3_TRB_CTRL_HWO;
 
@@ -920,6 +905,36 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 }
 
 /**
+ * dwc3_prepare_one_trb - setup one TRB from one request
+ * @dep: endpoint for which this request is prepared
+ * @req: dwc3_request pointer
+ * @chain: should this TRB be chained to the next?
+ * @node: only for isochronous endpoints. First TRB needs different type.
+ */
+static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
+		struct dwc3_request *req, unsigned chain, unsigned node)
+{
+	struct dwc3_trb		*trb;
+	unsigned		length = req->request.length;
+	unsigned		stream_id = req->request.stream_id;
+	unsigned		short_not_ok = req->request.short_not_ok;
+	unsigned		no_interrupt = req->request.no_interrupt;
+	dma_addr_t		dma = req->request.dma;
+
+	trb = &dep->trb_pool[dep->trb_enqueue];
+
+	if (!req->trb) {
+		dwc3_gadget_move_started_request(req);
+		req->trb = trb;
+		req->trb_dma = dwc3_trb_dma_offset(dep, trb);
+		dep->queued_requests++;
+	}
+
+	__dwc3_prepare_one_trb(dep, trb, dma, length, chain, node,
+			stream_id, short_not_ok, no_interrupt);
+}
+
+/**
  * dwc3_ep_prev_trb() - Returns the previous TRB in the ring
  * @dep: The endpoint with the TRB ring
  * @index: The index of the current TRB in the ring
@@ -974,21 +989,36 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
 {
 	struct scatterlist *sg = req->sg;
 	struct scatterlist *s;
-	unsigned int	length;
-	dma_addr_t	dma;
 	int		i;
 
 	for_each_sg(sg, s, req->num_pending_sgs, i) {
+		unsigned int length = req->request.length;
+		unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+		unsigned int rem = length % maxp;
 		unsigned chain = true;
 
-		length = sg_dma_len(s);
-		dma = sg_dma_address(s);
-
 		if (sg_is_last(s))
 			chain = false;
 
-		dwc3_prepare_one_trb(dep, req, dma, length,
-				chain, i);
+		if (rem && usb_endpoint_dir_out(dep->endpoint.desc) && !chain) {
+			struct dwc3	*dwc = dep->dwc;
+			struct dwc3_trb	*trb;
+
+			req->unaligned = true;
+
+			/* prepare normal TRB */
+			dwc3_prepare_one_trb(dep, req, true, i);
+
+			/* Now prepare one extra TRB to align transfer size */
+			trb = &dep->trb_pool[dep->trb_enqueue];
+			__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr,
+					maxp - rem, false, 0,
+					req->request.stream_id,
+					req->request.short_not_ok,
+					req->request.no_interrupt);
+		} else {
+			dwc3_prepare_one_trb(dep, req, chain, i);
+		}
 
 		if (!dwc3_calc_trbs_left(dep))
 			break;
@@ -998,14 +1028,28 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
 static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 		struct dwc3_request *req)
 {
-	unsigned int	length;
-	dma_addr_t	dma;
+	unsigned int length = req->request.length;
+	unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+	unsigned int rem = length % maxp;
+
+	if (rem && usb_endpoint_dir_out(dep->endpoint.desc)) {
+		struct dwc3	*dwc = dep->dwc;
+		struct dwc3_trb	*trb;
 
-	dma = req->request.dma;
-	length = req->request.length;
+		req->unaligned = true;
 
-	dwc3_prepare_one_trb(dep, req, dma, length,
-			false, 0);
+		/* prepare normal TRB */
+		dwc3_prepare_one_trb(dep, req, true, 0);
+
+		/* Now prepare one extra TRB to align transfer size */
+		trb = &dep->trb_pool[dep->trb_enqueue];
+		__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem,
+				false, 0, req->request.stream_id,
+				req->request.short_not_ok,
+				req->request.no_interrupt);
+	} else {
+		dwc3_prepare_one_trb(dep, req, false, 0);
+	}
 }
 
 /*
@@ -1335,6 +1379,9 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
 		unsigned transfer_in_flight;
 		unsigned started;
 
+		if (dep->flags & DWC3_EP_STALL)
+			return 0;
+
 		if (dep->number > 1)
 			trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
 		else
@@ -1356,6 +1403,8 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
 		else
 			dep->flags |= DWC3_EP_STALL;
 	} else {
+		if (!(dep->flags & DWC3_EP_STALL))
+			return 0;
 
 		ret = dwc3_send_clear_stall_ep_cmd(dep);
 		if (ret)
@@ -1918,6 +1967,44 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 			dep->endpoint.ops = &dwc3_gadget_ep0_ops;
 			if (!epnum)
 				dwc->gadget.ep0 = &dep->endpoint;
+		} else if (direction) {
+			int mdwidth;
+			int size;
+			int ret;
+			int num;
+
+			mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
+			/* MDWIDTH is represented in bits, we need it in bytes */
+			mdwidth /= 8;
+
+			size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(i));
+			size = DWC3_GTXFIFOSIZ_TXFDEF(size);
+
+			/* FIFO Depth is in MDWDITH bytes. Multiply */
+			size *= mdwidth;
+
+			num = size / 1024;
+			if (num == 0)
+				num = 1;
+
+			/*
+			 * FIFO sizes account an extra MDWIDTH * (num + 1) bytes for
+			 * internal overhead. We don't really know how these are used,
+			 * but documentation say it exists.
+			 */
+			size -= mdwidth * (num + 1);
+			size /= num;
+
+			usb_ep_set_maxpacket_limit(&dep->endpoint, size);
+
+			dep->endpoint.max_streams = 15;
+			dep->endpoint.ops = &dwc3_gadget_ep_ops;
+			list_add_tail(&dep->endpoint.ep_list,
+					&dwc->gadget.ep_list);
+
+			ret = dwc3_alloc_trb_pool(dep);
+			if (ret)
+				return ret;
 		} else {
 			int		ret;
 
@@ -2029,6 +2116,16 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 	if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO))
 		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 
+	/*
+	 * If we're dealing with unaligned size OUT transfer, we will be left
+	 * with one TRB pending in the ring. We need to manually clear HWO bit
+	 * from that TRB.
+	 */
+	if (req->unaligned && (trb->ctrl & DWC3_TRB_CTRL_HWO)) {
+		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+		return 1;
+	}
+
 	if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
 		return 1;
 
@@ -2118,6 +2215,13 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 					event, status, chain);
 		}
 
+		if (req->unaligned) {
+			trb = &dep->trb_pool[dep->trb_dequeue];
+			ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
+					event, status, false);
+			req->unaligned = false;
+		}
+
 		req->request.actual = length - req->remaining;
 
 		if ((req->request.actual < length) && req->num_pending_sgs)
@@ -3019,6 +3123,13 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 		goto err4;
 	}
 
+	dwc->bounce = dma_alloc_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE,
+			&dwc->bounce_addr, GFP_KERNEL);
+	if (!dwc->bounce) {
+		ret = -ENOMEM;
+		goto err5;
+	}
+
 	init_completion(&dwc->ep0_in_setup);
 
 	dwc->gadget.ops			= &dwc3_gadget_ops;
@@ -3050,27 +3161,24 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 	dwc->gadget.max_speed		= dwc->maximum_speed;
 
 	/*
-	 * Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize
-	 * on ep out.
-	 */
-	dwc->gadget.quirk_ep_out_aligned_size = true;
-
-	/*
 	 * REVISIT: Here we should clear all pending IRQs to be
 	 * sure we're starting from a well known location.
 	 */
 
 	ret = dwc3_gadget_init_endpoints(dwc);
 	if (ret)
-		goto err5;
+		goto err6;
 
 	ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register udc\n");
-		goto err5;
+		goto err6;
 	}
 
 	return 0;
+err6:
+	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
+			dwc->bounce_addr);
 
 err5:
 	kfree(dwc->zlp_buf);
@@ -3103,6 +3211,8 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 
 	dwc3_gadget_free_endpoints(dwc);
 
+	dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
+			dwc->bounce_addr);
 	dma_free_coherent(dwc->sysdev, DWC3_EP0_BOUNCE_SIZE,
 			dwc->ep0_bounce, dwc->ep0_bounce_addr);
 
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 487f0ff6ae25..76f0b0df37c1 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -54,11 +54,12 @@ out:
 
 int dwc3_host_init(struct dwc3 *dwc)
 {
-	struct property_entry	props[2];
+	struct property_entry	props[3];
 	struct platform_device	*xhci;
 	int			ret, irq;
 	struct resource		*res;
 	struct platform_device	*dwc3_pdev = to_platform_device(dwc->dev);
+	int			prop_idx = 0;
 
 	irq = dwc3_host_get_irq(dwc);
 	if (irq < 0)
@@ -97,8 +98,22 @@ int dwc3_host_init(struct dwc3 *dwc)
 
 	memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
 
-	if (dwc->usb3_lpm_capable) {
-		props[0].name = "usb3-lpm-capable";
+	if (dwc->usb3_lpm_capable)
+		props[prop_idx++].name = "usb3-lpm-capable";
+
+	/**
+	 * WORKAROUND: dwc3 revisions <=3.00a have a limitation
+	 * where Port Disable command doesn't work.
+	 *
+	 * The suggested workaround is that we avoid Port Disable
+	 * completely.
+	 *
+	 * This following flag tells XHCI to do just that.
+	 */
+	if (dwc->revision <= DWC3_REVISION_300A)
+		props[prop_idx++].name = "quirk-broken-port-ped";
+
+	if (prop_idx) {
 		ret = platform_device_add_properties(xhci, props);
 		if (ret) {
 			dev_err(dwc->dev, "failed to add properties to xHCI\n");