diff options
Diffstat (limited to 'drivers/uio')
| -rw-r--r-- | drivers/uio/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/uio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/uio/uio_netx.c | 172 |
3 files changed, 184 insertions, 0 deletions
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 8aa1955f35ed..069b1443be6c 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -94,4 +94,15 @@ config UIO_PCI_GENERIC primarily, for virtualization scenarios. If you compile this as a module, it will be called uio_pci_generic. +config UIO_NETX + tristate "Hilscher NetX Card driver" + depends on PCI + help + Driver for Hilscher NetX based fieldbus cards (cifX, comX). + This driver requires a userspace component that comes with the card + or is available from Hilscher (http://www.hilscher.com). + + To compile this driver as a module, choose M here; the module + will be called uio_netx. + endif diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile index 73b2e7516729..aa7d0333fa78 100644 --- a/drivers/uio/Makefile +++ b/drivers/uio/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_UIO_SMX) += uio_smx.o obj-$(CONFIG_UIO_AEC) += uio_aec.o obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o +obj-$(CONFIG_UIO_NETX) += uio_netx.o diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c new file mode 100644 index 000000000000..afbf0bd55cc9 --- /dev/null +++ b/drivers/uio/uio_netx.c @@ -0,0 +1,172 @@ +/* + * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX). + * See http://www.hilscher.com for details. + * + * (C) 2007 Hans J. Koch <hjk@linutronix.de> + * (C) 2008 Manuel Traut <manut@linutronix.de> + * + * Licensed under GPL version 2 only. + * + */ + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/uio_driver.h> + +#define PCI_VENDOR_ID_HILSCHER 0x15CF +#define PCI_DEVICE_ID_HILSCHER_NETX 0x0000 +#define PCI_SUBDEVICE_ID_NXSB_PCA 0x3235 +#define PCI_SUBDEVICE_ID_NXPCA 0x3335 + +#define DPM_HOST_INT_EN0 0xfff0 +#define DPM_HOST_INT_STAT0 0xffe0 + +#define DPM_HOST_INT_MASK 0xe600ffff +#define DPM_HOST_INT_GLOBAL_EN 0x80000000 + +static irqreturn_t netx_handler(int irq, struct uio_info *dev_info) +{ + void __iomem *int_enable_reg = dev_info->mem[0].internal_addr + + DPM_HOST_INT_EN0; + void __iomem *int_status_reg = dev_info->mem[0].internal_addr + + DPM_HOST_INT_STAT0; + + /* Is one of our interrupts enabled and active ? */ + if (!(ioread32(int_enable_reg) & ioread32(int_status_reg) + & DPM_HOST_INT_MASK)) + return IRQ_NONE; + + /* Disable interrupt */ + iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN, + int_enable_reg); + return IRQ_HANDLED; +} + +static int __devinit netx_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct uio_info *info; + int bar; + + info = kzalloc(sizeof(struct uio_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + if (pci_enable_device(dev)) + goto out_free; + + if (pci_request_regions(dev, "netx")) + goto out_disable; + + switch (id->device) { + case PCI_DEVICE_ID_HILSCHER_NETX: + bar = 0; + info->name = "netx"; + break; + default: + bar = 2; + info->name = "netx_plx"; + } + + /* BAR0 or 2 points to the card's dual port memory */ + info->mem[0].addr = pci_resource_start(dev, bar); + if (!info->mem[0].addr) + goto out_release; + info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar), + pci_resource_len(dev, bar)); + + if (!info->mem[0].internal_addr) + goto out_release; + + info->mem[0].size = pci_resource_len(dev, bar); + info->mem[0].memtype = UIO_MEM_PHYS; + info->irq = dev->irq; + info->irq_flags = IRQF_SHARED; + info->handler = netx_handler; + info->version = "0.0.1"; + + /* Make sure all interrupts are disabled */ + iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0); + + if (uio_register_device(&dev->dev, info)) + goto out_unmap; + + pci_set_drvdata(dev, info); + dev_info(&dev->dev, "Found %s card, registered UIO device.\n", + info->name); + + return 0; + +out_unmap: + iounmap(info->mem[0].internal_addr); +out_release: + pci_release_regions(dev); +out_disable: + pci_disable_device(dev); +out_free: + kfree(info); + return -ENODEV; +} + +static void netx_pci_remove(struct pci_dev *dev) +{ + struct uio_info *info = pci_get_drvdata(dev); + + /* Disable all interrupts */ + iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0); + uio_unregister_device(info); + pci_release_regions(dev); + pci_disable_device(dev); + pci_set_drvdata(dev, NULL); + iounmap(info->mem[0].internal_addr); + + kfree(info); +} + +static struct pci_device_id netx_pci_ids[] = { + { + .vendor = PCI_VENDOR_ID_HILSCHER, + .device = PCI_DEVICE_ID_HILSCHER_NETX, + .subvendor = 0, + .subdevice = 0, + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9030, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_SUBDEVICE_ID_NXSB_PCA, + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9030, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_SUBDEVICE_ID_NXPCA, + }, + { 0, } +}; + +static struct pci_driver netx_pci_driver = { + .name = "netx", + .id_table = netx_pci_ids, + .probe = netx_pci_probe, + .remove = netx_pci_remove, +}; + +static int __init netx_init_module(void) +{ + return pci_register_driver(&netx_pci_driver); +} + +static void __exit netx_exit_module(void) +{ + pci_unregister_driver(&netx_pci_driver); +} + +module_init(netx_init_module); +module_exit(netx_exit_module); + +MODULE_DEVICE_TABLE(pci, netx_pci_ids); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Hans J. Koch, Manuel Traut"); |
