7 files changed, 73 insertions, 18 deletions

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 76e03a7de9cc..48a07e2f617f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -218,7 +218,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 		spin_unlock_irq(&i->lock);
 		irq_flags |= up->port.irqflags;
 		ret = request_irq(up->port.irq, serial8250_interrupt,
-				  irq_flags, "serial", i);
+				  irq_flags, up->port.name, i);
 		if (ret < 0)
 			serial_do_unlink(i, up);
 	}
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index e65808c482f1..787b1160d3a5 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -530,12 +530,11 @@ static int dw8250_probe(struct platform_device *pdev)
 	}
 
 	data->rst = devm_reset_control_get_optional(dev, NULL);
-	if (IS_ERR(data->rst) && PTR_ERR(data->rst) == -EPROBE_DEFER) {
-		err = -EPROBE_DEFER;
+	if (IS_ERR(data->rst)) {
+		err = PTR_ERR(data->rst);
 		goto err_pclk;
 	}
-	if (!IS_ERR(data->rst))
-		reset_control_deassert(data->rst);
+	reset_control_deassert(data->rst);
 
 	dw8250_quirks(p, data);
 
@@ -567,8 +566,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	return 0;
 
 err_reset:
-	if (!IS_ERR(data->rst))
-		reset_control_assert(data->rst);
+	reset_control_assert(data->rst);
 
 err_pclk:
 	if (!IS_ERR(data->pclk))
@@ -589,8 +587,7 @@ static int dw8250_remove(struct platform_device *pdev)
 
 	serial8250_unregister_port(data->line);
 
-	if (!IS_ERR(data->rst))
-		reset_control_assert(data->rst);
+	reset_control_assert(data->rst);
 
 	if (!IS_ERR(data->pclk))
 		clk_disable_unprepare(data->pclk);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 85a12f032402..82fc48eca1df 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -39,6 +39,7 @@
 
 static unsigned int __init serial8250_early_in(struct uart_port *port, int offset)
 {
+	int reg_offset = offset;
 	offset <<= port->regshift;
 
 	switch (port->iotype) {
@@ -52,6 +53,8 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
 		return ioread32be(port->membase + offset);
 	case UPIO_PORT:
 		return inb(port->iobase + offset);
+	case UPIO_AU:
+		return port->serial_in(port, reg_offset);
 	default:
 		return 0;
 	}
@@ -59,6 +62,7 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
 
 static void __init serial8250_early_out(struct uart_port *port, int offset, int value)
 {
+	int reg_offset = offset;
 	offset <<= port->regshift;
 
 	switch (port->iotype) {
@@ -77,6 +81,9 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int
 	case UPIO_PORT:
 		outb(value, port->iobase + offset);
 		break;
+	case UPIO_AU:
+		port->serial_out(port, reg_offset, value);
+		break;
 	}
 }
 
@@ -172,3 +179,20 @@ OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
 OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
 
 #endif
+
+#ifdef CONFIG_SERIAL_8250_RT288X
+
+unsigned int au_serial_in(struct uart_port *p, int offset);
+void au_serial_out(struct uart_port *p, int offset, int value);
+
+static int __init early_au_setup(struct earlycon_device *dev, const char *opt)
+{
+	dev->port.serial_in = au_serial_in;
+	dev->port.serial_out = au_serial_out;
+	dev->port.iotype = UPIO_AU;
+	dev->con->write = early_serial8250_write;
+	return 0;
+}
+OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup);
+
+#endif
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index b89c4ffc0486..1270ff163f63 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -483,5 +483,5 @@ static struct pci_driver exar_pci_driver = {
 module_pci_driver(exar_pci_driver);
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Exar Serial Dricer");
+MODULE_DESCRIPTION("Exar Serial Driver");
 MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>");
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index b67e7a544935..e500f7dd2470 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -61,6 +61,12 @@
  * The IRQ setting mode of F81866 is not the same with F81216 series.
  *	Level/Low: IRQ_MODE0:0, IRQ_MODE1:0
  *	Edge/High: IRQ_MODE0:1, IRQ_MODE1:0
+ *
+ * Clock speeds for UART (register F2h)
+ * 00: 1.8432MHz.
+ * 01: 18.432MHz.
+ * 10: 24MHz.
+ * 11: 14.769MHz.
  */
 #define F81866_IRQ_MODE		0xf0
 #define F81866_IRQ_SHARE	BIT(0)
@@ -72,6 +78,13 @@
 #define F81866_LDN_LOW		0x10
 #define F81866_LDN_HIGH		0x16
 
+#define F81866_UART_CLK 0xF2
+#define F81866_UART_CLK_MASK (BIT(1) | BIT(0))
+#define F81866_UART_CLK_1_8432MHZ 0
+#define F81866_UART_CLK_14_769MHZ (BIT(1) | BIT(0))
+#define F81866_UART_CLK_18_432MHZ BIT(0)
+#define F81866_UART_CLK_24MHZ BIT(1)
+
 struct fintek_8250 {
 	u16 pid;
 	u16 base_port;
@@ -256,8 +269,26 @@ static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
 	}
 }
 
-static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
-			  unsigned int irq)
+static void fintek_8250_goto_highspeed(struct uart_8250_port *uart,
+			      struct fintek_8250 *pdata)
+{
+	sio_write_reg(pdata, LDN, pdata->index);
+
+	switch (pdata->pid) {
+	case CHIP_ID_F81866: /* set uart clock for high speed serial mode */
+		sio_write_mask_reg(pdata, F81866_UART_CLK,
+			F81866_UART_CLK_MASK,
+			F81866_UART_CLK_14_769MHZ);
+
+			uart->port.uartclk = 921600 * 16;
+		break;
+	default: /* leave clock speed untouched */
+		break;
+	}
+}
+
+static int probe_setup_port(struct fintek_8250 *pdata,
+					struct uart_8250_port *uart)
 {
 	static const u16 addr[] = {0x4e, 0x2e};
 	static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
@@ -284,18 +315,20 @@ static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
 				sio_write_reg(pdata, LDN, k);
 				aux = sio_read_reg(pdata, IO_ADDR1);
 				aux |= sio_read_reg(pdata, IO_ADDR2) << 8;
-				if (aux != io_address)
+				if (aux != uart->port.iobase)
 					continue;
 
 				pdata->index = k;
 
-				irq_data = irq_get_irq_data(irq);
+				irq_data = irq_get_irq_data(uart->port.irq);
 				if (irq_data)
 					level_mode =
 						irqd_is_level_type(irq_data);
 
 				fintek_8250_set_irq_mode(pdata, level_mode);
 				fintek_8250_set_max_fifo(pdata);
+				fintek_8250_goto_highspeed(uart, pdata);
+
 				fintek_8250_exit_key(addr[i]);
 
 				return 0;
@@ -330,7 +363,7 @@ int fintek_8250_probe(struct uart_8250_port *uart)
 	struct fintek_8250 *pdata;
 	struct fintek_8250 probe_data;
 
-	if (probe_setup_port(&probe_data, uart->port.iobase, uart->port.irq))
+	if (probe_setup_port(&probe_data, uart))
 		return -ENODEV;
 
 	pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL);
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index f3ea90f0e411..7dddd7e6a01c 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -183,7 +183,6 @@ static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
 	if (ret)
 		return;
 
-	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
 
 	/* Special DMA address for UART */
@@ -216,6 +215,8 @@ static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 	struct pci_dev *pdev = to_pci_dev(port->dev);
 	int ret;
 
+	pci_set_master(pdev);
+
 	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 6119516ef5fc..09a65a3ec7f7 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -328,7 +328,7 @@ static const s8 au_io_out_map[8] = {
 	-1,	/* UART_SCR (unmapped) */
 };
 
-static unsigned int au_serial_in(struct uart_port *p, int offset)
+unsigned int au_serial_in(struct uart_port *p, int offset)
 {
 	if (offset >= ARRAY_SIZE(au_io_in_map))
 		return UINT_MAX;
@@ -338,7 +338,7 @@ static unsigned int au_serial_in(struct uart_port *p, int offset)
 	return __raw_readl(p->membase + (offset << p->regshift));
 }
 
-static void au_serial_out(struct uart_port *p, int offset, int value)
+void au_serial_out(struct uart_port *p, int offset, int value)
 {
 	if (offset >= ARRAY_SIZE(au_io_out_map))
 		return;