summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_sli.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_sli.c')
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c279
1 files changed, 212 insertions, 67 deletions
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 30734caf77e1..a450d845ec22 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -6027,11 +6027,8 @@ lpfc_sli4_alloc_extent(struct lpfc_hba *phba, uint16_t type)
list_add_tail(&rsrc_blks->list, ext_blk_list);
rsrc_start = rsrc_id;
if ((type == LPFC_RSC_TYPE_FCOE_XRI) && (j == 0)) {
- phba->sli4_hba.scsi_xri_start = rsrc_start +
+ phba->sli4_hba.common_xri_start = rsrc_start +
lpfc_sli4_get_iocb_cnt(phba);
- phba->sli4_hba.nvme_xri_start =
- phba->sli4_hba.scsi_xri_start +
- phba->sli4_hba.scsi_xri_max;
}
while (rsrc_id < (rsrc_start + rsrc_size)) {
@@ -7057,6 +7054,45 @@ lpfc_sli4_repost_sgl_list(struct lpfc_hba *phba,
return total_cnt;
}
+/**
+ * lpfc_sli4_repost_common_sgl_list - Repost all the allocated nvme buffer sgls
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of nvme buffers that have been allocated and
+ * repost them to the port by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all nvme buffers on the lpfc_abts_nvme_sgl_list
+ * to the lpfc_common_buf_list. If the repost fails, reject all nvme buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_sli4_repost_common_sgl_list(struct lpfc_hba *phba)
+{
+ LIST_HEAD(post_nblist);
+ int num_posted, rc = 0;
+
+ /* get all NVME buffers need to repost to a local list */
+ spin_lock_irq(&phba->common_buf_list_get_lock);
+ spin_lock(&phba->common_buf_list_put_lock);
+ list_splice_init(&phba->lpfc_common_buf_list_get, &post_nblist);
+ list_splice(&phba->lpfc_common_buf_list_put, &post_nblist);
+ phba->get_common_bufs = 0;
+ phba->put_common_bufs = 0;
+ spin_unlock(&phba->common_buf_list_put_lock);
+ spin_unlock_irq(&phba->common_buf_list_get_lock);
+
+ /* post the list of nvme buffer sgls to port if available */
+ if (!list_empty(&post_nblist)) {
+ num_posted = lpfc_sli4_post_common_sgl_list(
+ phba, &post_nblist, phba->sli4_hba.common_xri_cnt);
+ /* failed to post any nvme buffer, return error */
+ if (num_posted == 0)
+ rc = -EIO;
+ }
+ return rc;
+}
+
void
lpfc_set_host_data(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
{
@@ -7518,24 +7554,26 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
/* We need 1 iocbq for every SGL, for IO processing */
cnt += phba->sli4_hba.nvmet_xri_cnt;
} else {
- /* update host scsi xri-sgl sizes and mappings */
- rc = lpfc_sli4_scsi_sgl_update(phba);
+ /* update host common xri-sgl sizes and mappings */
+ rc = lpfc_sli4_common_sgl_update(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "6309 Failed to update scsi-sgl size "
+ "6082 Failed to update nvme-sgl size "
"and mapping: %d\n", rc);
goto out_destroy_queue;
}
- /* update host nvme xri-sgl sizes and mappings */
- rc = lpfc_sli4_nvme_sgl_update(phba);
+ /* register the allocated common sgl pool to the port */
+ rc = lpfc_sli4_repost_common_sgl_list(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "6082 Failed to update nvme-sgl size "
- "and mapping: %d\n", rc);
+ "6116 Error %d during nvme sgl post "
+ "operation\n", rc);
+ /* Some NVME buffers were moved to abort nvme list */
+ /* A pci function reset will repost them */
+ rc = -ENODEV;
goto out_destroy_queue;
}
-
cnt = phba->cfg_iocb_cnt * 1024;
}
@@ -7572,36 +7610,6 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
}
}
- if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) {
- /* register the allocated scsi sgl pool to the port */
- rc = lpfc_sli4_repost_scsi_sgl_list(phba);
- if (unlikely(rc)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "0383 Error %d during scsi sgl post "
- "operation\n", rc);
- /* Some Scsi buffers were moved to abort scsi list */
- /* A pci function reset will repost them */
- rc = -ENODEV;
- goto out_destroy_queue;
- }
- }
-
- if ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) &&
- (phba->nvmet_support == 0)) {
-
- /* register the allocated nvme sgl pool to the port */
- rc = lpfc_repost_nvme_sgl_list(phba);
- if (unlikely(rc)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "6116 Error %d during nvme sgl post "
- "operation\n", rc);
- /* Some NVME buffers were moved to abort nvme list */
- /* A pci function reset will repost them */
- rc = -ENODEV;
- goto out_destroy_queue;
- }
- }
-
/* Post the rpi header region to the device. */
rc = lpfc_sli4_post_all_rpi_hdrs(phba);
if (unlikely(rc)) {
@@ -9484,7 +9492,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
/* 128 byte wqe support here */
lpfc_cmd = iocbq->context1;
- sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ sgl = (struct sli4_sge *)lpfc_cmd->dma_sgl;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
/* Word 0-2 - FCP_CMND */
@@ -9548,7 +9556,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
/* 128 byte wqe support here */
lpfc_cmd = iocbq->context1;
- sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ sgl = (struct sli4_sge *)lpfc_cmd->dma_sgl;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
/* Word 0-2 - FCP_CMND */
@@ -9605,7 +9613,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
/* 128 byte wqe support here */
lpfc_cmd = iocbq->context1;
- sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ sgl = (struct sli4_sge *)lpfc_cmd->dma_sgl;
fcp_cmnd = lpfc_cmd->fcp_cmnd;
/* Word 0-2 - FCP_CMND */
@@ -16827,22 +16835,22 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba,
}
/**
- * lpfc_sli4_post_scsi_sgl_block - post a block of scsi sgl list to firmware
+ * lpfc_sli4_post_common_sgl_block - post a block of nvme sgl list to firmware
* @phba: pointer to lpfc hba data structure.
- * @sblist: pointer to scsi buffer list.
+ * @nblist: pointer to nvme buffer list.
* @count: number of scsi buffers on the list.
*
* This routine is invoked to post a block of @count scsi sgl pages from a
- * SCSI buffer list @sblist to the HBA using non-embedded mailbox command.
+ * SCSI buffer list @nblist to the HBA using non-embedded mailbox command.
* No Lock is held.
*
**/
-int
-lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba,
- struct list_head *sblist,
- int count)
+static int
+lpfc_sli4_post_common_sgl_block(struct lpfc_hba *phba,
+ struct list_head *nblist,
+ int count)
{
- struct lpfc_scsi_buf *psb;
+ struct lpfc_nvme_buf *lpfc_ncmd;
struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
struct sgl_page_pairs *sgl_pg_pairs;
void *viraddr;
@@ -16860,25 +16868,25 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba,
sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
if (reqlen > SLI4_PAGE_SIZE) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "0217 Block sgl registration required DMA "
+ "6118 Block sgl registration required DMA "
"size (%d) great than a page\n", reqlen);
return -ENOMEM;
}
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0283 Failed to allocate mbox cmd memory\n");
+ "6119 Failed to allocate mbox cmd memory\n");
return -ENOMEM;
}
/* Allocate DMA memory and set up the non-embedded mailbox command */
alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
- LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
- LPFC_SLI4_MBX_NEMBED);
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+ reqlen, LPFC_SLI4_MBX_NEMBED);
if (alloclen < reqlen) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2561 Allocated DMA memory size (%d) is "
+ "6120 Allocated DMA memory size (%d) is "
"less than the requested DMA memory "
"size (%d)\n", alloclen, reqlen);
lpfc_sli4_mbox_cmd_free(phba, mbox);
@@ -16893,14 +16901,15 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba,
sgl_pg_pairs = &sgl->sgl_pg_pairs;
pg_pairs = 0;
- list_for_each_entry(psb, sblist, list) {
+ list_for_each_entry(lpfc_ncmd, nblist, list) {
/* Set up the sge entry */
sgl_pg_pairs->sgl_pg0_addr_lo =
- cpu_to_le32(putPaddrLow(psb->dma_phys_bpl));
+ cpu_to_le32(putPaddrLow(lpfc_ncmd->dma_phys_sgl));
sgl_pg_pairs->sgl_pg0_addr_hi =
- cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl));
+ cpu_to_le32(putPaddrHigh(lpfc_ncmd->dma_phys_sgl));
if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
- pdma_phys_bpl1 = psb->dma_phys_bpl + SGL_PAGE_SIZE;
+ pdma_phys_bpl1 = lpfc_ncmd->dma_phys_sgl +
+ SGL_PAGE_SIZE;
else
pdma_phys_bpl1 = 0;
sgl_pg_pairs->sgl_pg1_addr_lo =
@@ -16909,7 +16918,7 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba,
cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
/* Keep the first xritag on the list */
if (pg_pairs == 0)
- xritag_start = psb->cur_iocbq.sli4_xritag;
+ xritag_start = lpfc_ncmd->cur_iocbq.sli4_xritag;
sgl_pg_pairs++;
pg_pairs++;
}
@@ -16918,20 +16927,20 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba,
/* Perform endian conversion if necessary */
sgl->word0 = cpu_to_le32(sgl->word0);
- if (!phba->sli4_hba.intr_enable)
+ if (!phba->sli4_hba.intr_enable) {
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
- else {
+ } else {
mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
}
- shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+ shdr = (union lpfc_sli4_cfg_shdr *)&sgl->cfg_shdr;
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
if (rc != MBX_TIMEOUT)
lpfc_sli4_mbox_cmd_free(phba, mbox);
if (shdr_status || shdr_add_status || rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2564 POST_SGL_BLOCK mailbox command failed "
+ "6125 POST_SGL_BLOCK mailbox command failed "
"status x%x add_status x%x mbx status x%x\n",
shdr_status, shdr_add_status, rc);
rc = -ENXIO;
@@ -16940,6 +16949,142 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba,
}
/**
+ * lpfc_sli4_post_common_sgl_list - Post blocks of nvme buffer sgls from a list
+ * @phba: pointer to lpfc hba data structure.
+ * @post_nblist: pointer to the nvme buffer list.
+ *
+ * This routine walks a list of nvme buffers that was passed in. It attempts
+ * to construct blocks of nvme buffer sgls which contains contiguous xris and
+ * uses the non-embedded SGL block post mailbox commands to post to the port.
+ * For single NVME buffer sgl with non-contiguous xri, if any, it shall use
+ * embedded SGL post mailbox command for posting. The @post_nblist passed in
+ * must be local list, thus no lock is needed when manipulate the list.
+ *
+ * Returns: 0 = failure, non-zero number of successfully posted buffers.
+ **/
+int
+lpfc_sli4_post_common_sgl_list(struct lpfc_hba *phba,
+ struct list_head *post_nblist, int sb_count)
+{
+ struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
+ int status, sgl_size;
+ int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
+ dma_addr_t pdma_phys_sgl1;
+ int last_xritag = NO_XRI;
+ int cur_xritag;
+ unsigned long iflag;
+ LIST_HEAD(prep_nblist);
+ LIST_HEAD(blck_nblist);
+ LIST_HEAD(nvme_nblist);
+
+ /* sanity check */
+ if (sb_count <= 0)
+ return -EINVAL;
+
+ sgl_size = phba->cfg_sg_dma_buf_size;
+ list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, post_nblist, list) {
+ list_del_init(&lpfc_ncmd->list);
+ block_cnt++;
+ if ((last_xritag != NO_XRI) &&
+ (lpfc_ncmd->cur_iocbq.sli4_xritag != last_xritag + 1)) {
+ /* a hole in xri block, form a sgl posting block */
+ list_splice_init(&prep_nblist, &blck_nblist);
+ post_cnt = block_cnt - 1;
+ /* prepare list for next posting block */
+ list_add_tail(&lpfc_ncmd->list, &prep_nblist);
+ block_cnt = 1;
+ } else {
+ /* prepare list for next posting block */
+ list_add_tail(&lpfc_ncmd->list, &prep_nblist);
+ /* enough sgls for non-embed sgl mbox command */
+ if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+ list_splice_init(&prep_nblist, &blck_nblist);
+ post_cnt = block_cnt;
+ block_cnt = 0;
+ }
+ }
+ num_posting++;
+ last_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
+
+ /* end of repost sgl list condition for NVME buffers */
+ if (num_posting == sb_count) {
+ if (post_cnt == 0) {
+ /* last sgl posting block */
+ list_splice_init(&prep_nblist, &blck_nblist);
+ post_cnt = block_cnt;
+ } else if (block_cnt == 1) {
+ /* last single sgl with non-contiguous xri */
+ if (sgl_size > SGL_PAGE_SIZE)
+ pdma_phys_sgl1 =
+ lpfc_ncmd->dma_phys_sgl +
+ SGL_PAGE_SIZE;
+ else
+ pdma_phys_sgl1 = 0;
+ cur_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
+ status = lpfc_sli4_post_sgl(
+ phba, lpfc_ncmd->dma_phys_sgl,
+ pdma_phys_sgl1, cur_xritag);
+ if (status) {
+ /* failure, put on abort nvme list */
+ lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
+ } else {
+ /* success, put on NVME buffer list */
+ lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
+ lpfc_ncmd->status = IOSTAT_SUCCESS;
+ num_posted++;
+ }
+ /* success, put on NVME buffer sgl list */
+ list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
+ }
+ }
+
+ /* continue until a nembed page worth of sgls */
+ if (post_cnt == 0)
+ continue;
+
+ /* post block of NVME buffer list sgls */
+ status = lpfc_sli4_post_common_sgl_block(phba, &blck_nblist,
+ post_cnt);
+
+ /* don't reset xirtag due to hole in xri block */
+ if (block_cnt == 0)
+ last_xritag = NO_XRI;
+
+ /* reset NVME buffer post count for next round of posting */
+ post_cnt = 0;
+
+ /* put posted NVME buffer-sgl posted on NVME buffer sgl list */
+ while (!list_empty(&blck_nblist)) {
+ list_remove_head(&blck_nblist, lpfc_ncmd,
+ struct lpfc_nvme_buf, list);
+ if (status) {
+ /* failure, put on abort nvme list */
+ lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
+ } else {
+ /* success, put on NVME buffer list */
+ lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
+ lpfc_ncmd->status = IOSTAT_SUCCESS;
+ num_posted++;
+ }
+ list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
+ }
+ }
+ /* Push NVME buffers with sgl posted to the available list */
+ while (!list_empty(&nvme_nblist)) {
+ list_remove_head(&nvme_nblist, lpfc_ncmd,
+ struct lpfc_nvme_buf, list);
+ lpfc_ncmd->cur_iocbq.wqe_cmpl = NULL;
+ lpfc_ncmd->cur_iocbq.iocb_cmpl = NULL;
+ spin_lock_irqsave(&phba->common_buf_list_put_lock, iflag);
+ list_add_tail(&lpfc_ncmd->list,
+ &phba->lpfc_common_buf_list_put);
+ phba->put_common_bufs++;
+ spin_unlock_irqrestore(&phba->common_buf_list_put_lock, iflag);
+ }
+ return num_posted;
+}
+
+/**
* lpfc_fc_frame_check - Check that this frame is a valid frame to handle
* @phba: pointer to lpfc_hba struct that the frame was received on
* @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
OpenPOWER on IntegriCloud