summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aacraid/aachba.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aacraid/aachba.c')
-rw-r--r--drivers/scsi/aacraid/aachba.c70
1 files changed, 49 insertions, 21 deletions
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index bfd0e64964ac..c05092fd3a9d 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -144,51 +144,77 @@ static char *aac_get_status_string(u32 status);
*/
static int nondasd = -1;
-static int aac_cache = 0;
+static int aac_cache;
static int dacmode = -1;
-
+int aac_msi;
int aac_commit = -1;
int startup_timeout = 180;
int aif_timeout = 120;
module_param(nondasd, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices. 0=off, 1=on");
+MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices."
+ " 0=off, 1=on");
module_param_named(cache, aac_cache, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n\tbit 0 - Disable FUA in WRITE SCSI commands\n\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n\tbit 2 - Disable only if Battery not protecting Cache");
+MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n"
+ "\tbit 0 - Disable FUA in WRITE SCSI commands\n"
+ "\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
+ "\tbit 2 - Disable only if Battery not protecting Cache");
module_param(dacmode, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on");
+MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC."
+ " 0=off, 1=on");
module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.\nThis is typically needed in systems that do not have a BIOS. 0=off, 1=on");
+MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the"
+ " adapter for foreign arrays.\n"
+ "This is typically needed in systems that do not have a BIOS."
+ " 0=off, 1=on");
+module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(msi, "IRQ handling."
+ " 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
module_param(startup_timeout, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for adapter to have it's kernel up and\nrunning. This is typically adjusted for large systems that do not have a BIOS.");
+MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
+ " adapter to have it's kernel up and\n"
+ "running. This is typically adjusted for large systems that do not"
+ " have a BIOS.");
module_param(aif_timeout, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for applications to pick up AIFs before\nderegistering them. This is typically adjusted for heavily burdened systems.");
+MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for"
+ " applications to pick up AIFs before\n"
+ "deregistering them. This is typically adjusted for heavily burdened"
+ " systems.");
int numacb = -1;
module_param(numacb, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control blocks (FIB) allocated. Valid values are 512 and down. Default is to use suggestion from Firmware.");
+MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control"
+ " blocks (FIB) allocated. Valid values are 512 and down. Default is"
+ " to use suggestion from Firmware.");
int acbsize = -1;
module_param(acbsize, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware.");
+MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB)"
+ " size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
+ " suggestion from Firmware.");
int update_interval = 30 * 60;
module_param(update_interval, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(update_interval, "Interval in seconds between time sync updates issued to adapter.");
+MODULE_PARM_DESC(update_interval, "Interval in seconds between time sync"
+ " updates issued to adapter.");
int check_interval = 24 * 60 * 60;
module_param(check_interval, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health checks.");
+MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health"
+ " checks.");
int aac_check_reset = 1;
module_param_named(check_reset, aac_check_reset, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(aac_check_reset, "If adapter fails health check, reset the adapter. a value of -1 forces the reset to adapters programmed to ignore it.");
+MODULE_PARM_DESC(aac_check_reset, "If adapter fails health check, reset the"
+ " adapter. a value of -1 forces the reset to adapters programmed to"
+ " ignore it.");
int expose_physicals = -1;
module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. -1=protect 0=off, 1=on");
+MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays."
+ " -1=protect 0=off, 1=on");
-int aac_reset_devices = 0;
+int aac_reset_devices;
module_param_named(reset_devices, aac_reset_devices, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(reset_devices, "Force an adapter reset at initialization.");
@@ -1315,7 +1341,7 @@ int aac_get_adapter_info(struct aac_dev* dev)
(int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid),
dev->supplement_adapter_info.VpdInfo.Tsid);
}
- if (!aac_check_reset || ((aac_check_reset != 1) &&
+ if (!aac_check_reset || ((aac_check_reset == 1) &&
(dev->supplement_adapter_info.SupportedOptions2 &
AAC_OPTION_IGNORE_RESET))) {
printk(KERN_INFO "%s%d: Reset Adapter Ignored\n",
@@ -1353,13 +1379,14 @@ int aac_get_adapter_info(struct aac_dev* dev)
if (nondasd != -1)
dev->nondasd_support = (nondasd!=0);
- if(dev->nondasd_support != 0) {
+ if (dev->nondasd_support && !dev->in_reset)
printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
- }
dev->dac_support = 0;
if( (sizeof(dma_addr_t) > 4) && (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)){
- printk(KERN_INFO "%s%d: 64bit support enabled.\n", dev->name, dev->id);
+ if (!dev->in_reset)
+ printk(KERN_INFO "%s%d: 64bit support enabled.\n",
+ dev->name, dev->id);
dev->dac_support = 1;
}
@@ -1369,8 +1396,9 @@ int aac_get_adapter_info(struct aac_dev* dev)
if(dev->dac_support != 0) {
if (!pci_set_dma_mask(dev->pdev, DMA_64BIT_MASK) &&
!pci_set_consistent_dma_mask(dev->pdev, DMA_64BIT_MASK)) {
- printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n",
- dev->name, dev->id);
+ if (!dev->in_reset)
+ printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n",
+ dev->name, dev->id);
} else if (!pci_set_dma_mask(dev->pdev, DMA_32BIT_MASK) &&
!pci_set_consistent_dma_mask(dev->pdev, DMA_32BIT_MASK)) {
printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
OpenPOWER on IntegriCloud