diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/mvm/fw-api.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/fw-api.h | 78 |
1 files changed, 77 insertions, 1 deletions
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 309a9b9a94fe..95f5b3274efb 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -86,6 +86,8 @@ enum { #define IWL_MVM_STATION_COUNT 16 +#define IWL_MVM_TDLS_STA_COUNT 4 + /* commands */ enum { MVM_ALIVE = 0x1, @@ -131,10 +133,12 @@ enum { /* Scan offload */ SCAN_OFFLOAD_REQUEST_CMD = 0x51, SCAN_OFFLOAD_ABORT_CMD = 0x52, + HOT_SPOT_CMD = 0x53, SCAN_OFFLOAD_COMPLETE = 0x6D, SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E, SCAN_OFFLOAD_CONFIG_CMD = 0x6f, MATCH_FOUND_NOTIFICATION = 0xd9, + SCAN_ITERATION_COMPLETE = 0xe7, /* Phy */ PHY_CONFIGURATION_CMD = 0x6a, @@ -163,7 +167,6 @@ enum { BEACON_NOTIFICATION = 0x90, BEACON_TEMPLATE_CMD = 0x91, TX_ANT_CONFIGURATION_CMD = 0x98, - BT_CONFIG = 0x9b, STATISTICS_NOTIFICATION = 0x9d, EOSP_NOTIFICATION = 0x9e, REDUCE_TX_POWER_CMD = 0x9f, @@ -185,6 +188,10 @@ enum { BT_COEX_PRIO_TABLE = 0xcc, BT_COEX_PROT_ENV = 0xcd, BT_PROFILE_NOTIFICATION = 0xce, + BT_CONFIG = 0x9b, + BT_COEX_UPDATE_SW_BOOST = 0x5a, + BT_COEX_UPDATE_CORUN_LUT = 0x5b, + BT_COEX_UPDATE_REDUCED_TXP = 0x5c, BT_COEX_CI = 0x5d, REPLY_SF_CFG_CMD = 0xd1, @@ -534,6 +541,9 @@ enum iwl_time_event_type { /* WiDi Sync Events */ TE_WIDI_TX_SYNC, + /* Channel Switch NoA */ + TE_P2P_GO_CSA_NOA, + TE_MAX }; /* MAC_EVENT_TYPE_API_E_VER_1 */ @@ -901,6 +911,72 @@ struct iwl_phy_context_cmd { __le32 dsp_cfg_flags; } __packed; /* PHY_CONTEXT_CMD_API_VER_1 */ +/* + * Aux ROC command + * + * Command requests the firmware to create a time event for a certain duration + * and remain on the given channel. This is done by using the Aux framework in + * the FW. + * The command was first used for Hot Spot issues - but can be used regardless + * to Hot Spot. + * + * ( HOT_SPOT_CMD 0x53 ) + * + * @id_and_color: ID and color of the MAC + * @action: action to perform, one of FW_CTXT_ACTION_* + * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the + * event_unique_id should be the id of the time event assigned by ucode. + * Otherwise ignore the event_unique_id. + * @sta_id_and_color: station id and color, resumed during "Remain On Channel" + * activity. + * @channel_info: channel info + * @node_addr: Our MAC Address + * @reserved: reserved for alignment + * @apply_time: GP2 value to start (should always be the current GP2 value) + * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max + * time by which start of the event is allowed to be postponed. + * @duration: event duration in TU To calculate event duration: + * timeEventDuration = min(duration, remainingQuota) + */ +struct iwl_hs20_roc_req { + /* COMMON_INDEX_HDR_API_S_VER_1 hdr */ + __le32 id_and_color; + __le32 action; + __le32 event_unique_id; + __le32 sta_id_and_color; + struct iwl_fw_channel_info channel_info; + u8 node_addr[ETH_ALEN]; + __le16 reserved; + __le32 apply_time; + __le32 apply_time_max_delay; + __le32 duration; +} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */ + +/* + * values for AUX ROC result values + */ +enum iwl_mvm_hot_spot { + HOT_SPOT_RSP_STATUS_OK, + HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS, + HOT_SPOT_MAX_NUM_OF_SESSIONS, +}; + +/* + * Aux ROC command response + * + * In response to iwl_hs20_roc_req the FW sends this command to notify the + * driver the uid of the timevent. + * + * ( HOT_SPOT_CMD 0x53 ) + * + * @event_unique_id: Unique ID of time event assigned by ucode + * @status: Return status 0 is success, all the rest used for specific errors + */ +struct iwl_hs20_roc_res { + __le32 event_unique_id; + __le32 status; +} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */ + #define IWL_RX_INFO_PHY_CNT 8 #define IWL_RX_INFO_ENERGY_ANT_ABC_IDX 1 #define IWL_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff |
