diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-prph.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-prph.h | 229 |
1 files changed, 229 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h new file mode 100644 index 000000000000..0df41148eadc --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -0,0 +1,229 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU Geeral Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#ifndef __iwl_prph_h__ +#define __iwl_prph_h__ + + +#define PRPH_BASE (0x00000) +#define PRPH_END (0xFFFFF) + +/* APMG (power management) constants */ +#define APMG_BASE (PRPH_BASE + 0x3000) +#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000) +#define APMG_CLK_EN_REG (APMG_BASE + 0x0004) +#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008) +#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c) +#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010) +#define APMG_RFKILL_REG (APMG_BASE + 0x0014) +#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c) +#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020) + +#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) +#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) + +#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) + +#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) + +#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) +#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) +#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x01000000) + + +/** + * BSM (Bootstrap State Machine) + * + * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program + * in special SRAM that does not power down when the embedded control + * processor is sleeping (e.g. for periodic power-saving shutdowns of radio). + * + * When powering back up after sleeps (or during initial uCode load), the BSM + * internally loads the short bootstrap program from the special SRAM into the + * embedded processor's instruction SRAM, and starts the processor so it runs + * the bootstrap program. + * + * This bootstrap program loads (via PCI busmaster DMA) instructions and data + * images for a uCode program from host DRAM locations. The host driver + * indicates DRAM locations and sizes for instruction and data images via the + * four BSM_DRAM_* registers. Once the bootstrap program loads the new program, + * the new program starts automatically. + * + * The uCode used for open-source drivers includes two programs: + * + * 1) Initialization -- performs hardware calibration and sets up some + * internal data, then notifies host via "initialize alive" notification + * (struct iwl_init_alive_resp) that it has completed all of its work. + * After signal from host, it then loads and starts the runtime program. + * The initialization program must be used when initially setting up the + * NIC after loading the driver. + * + * 2) Runtime/Protocol -- performs all normal runtime operations. This + * notifies host via "alive" notification (struct iwl_alive_resp) that it + * is ready to be used. + * + * When initializing the NIC, the host driver does the following procedure: + * + * 1) Load bootstrap program (instructions only, no data image for bootstrap) + * into bootstrap memory. Use dword writes starting at BSM_SRAM_LOWER_BOUND + * + * 2) Point (via BSM_DRAM_*) to the "initialize" uCode data and instruction + * images in host DRAM. + * + * 3) Set up BSM to copy from BSM SRAM into uCode instruction SRAM when asked: + * BSM_WR_MEM_SRC_REG = 0 + * BSM_WR_MEM_DST_REG = RTC_INST_LOWER_BOUND + * BSM_WR_MEM_DWCOUNT_REG = # dwords in bootstrap instruction image + * + * 4) Load bootstrap into instruction SRAM: + * BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START + * + * 5) Wait for load completion: + * Poll BSM_WR_CTRL_REG for BSM_WR_CTRL_REG_BIT_START = 0 + * + * 6) Enable future boot loads whenever NIC's power management triggers it: + * BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START_EN + * + * 7) Start the NIC by removing all reset bits: + * CSR_RESET = 0 + * + * The bootstrap uCode (already in instruction SRAM) loads initialization + * uCode. Initialization uCode performs data initialization, sends + * "initialize alive" notification to host, and waits for a signal from + * host to load runtime code. + * + * 4) Point (via BSM_DRAM_*) to the "runtime" uCode data and instruction + * images in host DRAM. The last register loaded must be the instruction + * bytecount register ("1" in MSbit tells initialization uCode to load + * the runtime uCode): + * BSM_DRAM_INST_BYTECOUNT_REG = bytecount | BSM_DRAM_INST_LOAD + * + * 5) Wait for "alive" notification, then issue normal runtime commands. + * + * Data caching during power-downs: + * + * Just before the embedded controller powers down (e.g for automatic + * power-saving modes, or for RFKILL), uCode stores (via PCI busmaster DMA) + * a current snapshot of the embedded processor's data SRAM into host DRAM. + * This caches the data while the embedded processor's memory is powered down. + * Location and size are controlled by BSM_DRAM_DATA_* registers. + * + * NOTE: Instruction SRAM does not need to be saved, since that doesn't + * change during operation; the original image (from uCode distribution + * file) can be used for reload. + * + * When powering back up, the BSM loads the bootstrap program. Bootstrap looks + * at the BSM_DRAM_* registers, which now point to the runtime instruction + * image and the cached (modified) runtime data (*not* the initialization + * uCode). Bootstrap reloads these runtime images into SRAM, and restarts the + * uCode from where it left off before the power-down. + * + * NOTE: Initialization uCode does *not* run as part of the save/restore + * procedure. + * + * This save/restore method is mostly for autonomous power management during + * normal operation (result of POWER_TABLE_CMD). Platform suspend/resume and + * RFKILL should use complete restarts (with total re-initialization) of uCode, + * allowing total shutdown (including BSM memory). + * + * Note that, during normal operation, the host DRAM that held the initial + * startup data for the runtime code is now being used as a backup data cache + * for modified data! If you need to completely re-initialize the NIC, make + * sure that you use the runtime data image from the uCode distribution file, + * not the modified/saved runtime data. You may want to store a separate + * "clean" runtime data image in DRAM to avoid disk reads of distribution file. + */ + +/* BSM bit fields */ +#define BSM_WR_CTRL_REG_BIT_START (0x80000000) /* start boot load now */ +#define BSM_WR_CTRL_REG_BIT_START_EN (0x40000000) /* enable boot after pwrup*/ +#define BSM_DRAM_INST_LOAD (0x80000000) /* start program load now */ + +/* BSM addresses */ +#define BSM_BASE (PRPH_BASE + 0x3400) +#define BSM_END (PRPH_BASE + 0x3800) + +#define BSM_WR_CTRL_REG (BSM_BASE + 0x000) /* ctl and status */ +#define BSM_WR_MEM_SRC_REG (BSM_BASE + 0x004) /* source in BSM mem */ +#define BSM_WR_MEM_DST_REG (BSM_BASE + 0x008) /* dest in SRAM mem */ +#define BSM_WR_DWCOUNT_REG (BSM_BASE + 0x00C) /* bytes */ +#define BSM_WR_STATUS_REG (BSM_BASE + 0x010) /* bit 0: 1 == done */ + +/* + * Pointers and size regs for bootstrap load and data SRAM save/restore. + * NOTE: 3945 pointers use bits 31:0 of DRAM address. + * 4965 pointers use bits 35:4 of DRAM address. + */ +#define BSM_DRAM_INST_PTR_REG (BSM_BASE + 0x090) +#define BSM_DRAM_INST_BYTECOUNT_REG (BSM_BASE + 0x094) +#define BSM_DRAM_DATA_PTR_REG (BSM_BASE + 0x098) +#define BSM_DRAM_DATA_BYTECOUNT_REG (BSM_BASE + 0x09C) + +/* + * BSM special memory, stays powered on during power-save sleeps. + * Read/write, address range from LOWER_BOUND to (LOWER_BOUND + SIZE -1) + */ +#define BSM_SRAM_LOWER_BOUND (PRPH_BASE + 0x3800) +#define BSM_SRAM_SIZE (1024) /* bytes */ + + +#endif /* __iwl_prph_h__ */ |
