diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-prph.h')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/iwl-prph.h | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl-prph.h b/drivers/net/wireless/iwlegacy/iwl-prph.h index 96788a128a61..caa383726787 100644 --- a/drivers/net/wireless/iwlegacy/iwl-prph.h +++ b/drivers/net/wireless/iwlegacy/iwl-prph.h @@ -320,19 +320,19 @@ * can keep track of at one time when creating block-ack chains of frames. * Note that "64" matches the number of ack bits in a block-ack packet. * Driver should use SCD_WIN_SIZE and SCD_FRAME_LIMIT values to initialize - * IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) values. + * IL49_SCD_CONTEXT_QUEUE_OFFSET(x) values. */ #define SCD_WIN_SIZE 64 #define SCD_FRAME_LIMIT 64 /* SCD registers are internal, must be accessed via HBUS_TARG_PRPH regs */ -#define IWL49_SCD_START_OFFSET 0xa02c00 +#define IL49_SCD_START_OFFSET 0xa02c00 /* * 4965 tells driver SRAM address for internal scheduler structs via this reg. * Value is valid only after "Alive" response from uCode. */ -#define IWL49_SCD_SRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x0) +#define IL49_SCD_SRAM_BASE_ADDR (IL49_SCD_START_OFFSET + 0x0) /* * Driver may need to update queue-empty bits after changing queue's @@ -343,7 +343,7 @@ * 15-00: Empty state, one for each queue -- 1: empty, 0: non-empty * NOTE: This register is not used by Linux driver. */ -#define IWL49_SCD_EMPTY_BITS (IWL49_SCD_START_OFFSET + 0x4) +#define IL49_SCD_EMPTY_BITS (IL49_SCD_START_OFFSET + 0x4) /* * Physical base address of array of byte count (BC) circular buffers (CBs). @@ -355,7 +355,7 @@ * Bit fields: * 25-00: Byte Count CB physical address [35:10], must be 1024-byte aligned. */ -#define IWL49_SCD_DRAM_BASE_ADDR (IWL49_SCD_START_OFFSET + 0x10) +#define IL49_SCD_DRAM_BASE_ADDR (IL49_SCD_START_OFFSET + 0x10) /* * Enables any/all Tx DMA/FIFO channels. @@ -364,7 +364,7 @@ * Bit fields: * 7- 0: Enable (1), disable (0), one bit for each channel 0-7 */ -#define IWL49_SCD_TXFACT (IWL49_SCD_START_OFFSET + 0x1c) +#define IL49_SCD_TXFACT (IL49_SCD_START_OFFSET + 0x1c) /* * Queue (x) Write Pointers (indexes, really!), one for each Tx queue. * Initialized and updated by driver as new TFDs are added to queue. @@ -372,7 +372,7 @@ * Start Sequence Number; index = (SSN & 0xff) * NOTE: Alternative to HBUS_TARG_WRPTR, which is what Linux driver uses? */ -#define IWL49_SCD_QUEUE_WRPTR(x) (IWL49_SCD_START_OFFSET + 0x24 + (x) * 4) +#define IL49_SCD_QUEUE_WRPTR(x) (IL49_SCD_START_OFFSET + 0x24 + (x) * 4) /* * Queue (x) Read Pointers (indexes, really!), one for each Tx queue. @@ -380,7 +380,7 @@ * For Scheduler-ACK mode, index indicates first frame in Tx window. * Initialized by driver, updated by scheduler. */ -#define IWL49_SCD_QUEUE_RDPTR(x) (IWL49_SCD_START_OFFSET + 0x64 + (x) * 4) +#define IL49_SCD_QUEUE_RDPTR(x) (IL49_SCD_START_OFFSET + 0x64 + (x) * 4) /* * Select which queues work in chain mode (1) vs. not (0). @@ -391,7 +391,7 @@ * NOTE: If driver sets up queue for chain mode, it should be also set up * Scheduler-ACK mode as well, via SCD_QUEUE_STATUS_BITS(x). */ -#define IWL49_SCD_QUEUECHAIN_SEL (IWL49_SCD_START_OFFSET + 0xd0) +#define IL49_SCD_QUEUECHAIN_SEL (IL49_SCD_START_OFFSET + 0xd0) /* * Select which queues interrupt driver when scheduler increments @@ -402,7 +402,7 @@ * NOTE: This functionality is apparently a no-op; driver relies on interrupts * from Rx queue to read Tx command responses and update Tx queues. */ -#define IWL49_SCD_INTERRUPT_MASK (IWL49_SCD_START_OFFSET + 0xe4) +#define IL49_SCD_INTERRUPT_MASK (IL49_SCD_START_OFFSET + 0xe4) /* * Queue search status registers. One for each queue. @@ -423,18 +423,18 @@ * NOTE: If enabling Scheduler-ACK mode, chain mode should also be enabled * via SCD_QUEUECHAIN_SEL. */ -#define IWL49_SCD_QUEUE_STATUS_BITS(x)\ - (IWL49_SCD_START_OFFSET + 0x104 + (x) * 4) +#define IL49_SCD_QUEUE_STATUS_BITS(x)\ + (IL49_SCD_START_OFFSET + 0x104 + (x) * 4) /* Bit field positions */ -#define IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE (0) -#define IWL49_SCD_QUEUE_STTS_REG_POS_TXF (1) -#define IWL49_SCD_QUEUE_STTS_REG_POS_WSL (5) -#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) +#define IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE (0) +#define IL49_SCD_QUEUE_STTS_REG_POS_TXF (1) +#define IL49_SCD_QUEUE_STTS_REG_POS_WSL (5) +#define IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK (8) /* Write masks */ -#define IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) -#define IWL49_SCD_QUEUE_STTS_REG_MSK (0x0007FC00) +#define IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (10) +#define IL49_SCD_QUEUE_STTS_REG_MSK (0x0007FC00) /** * 4965 internal SRAM structures for scheduler, shared with driver ... @@ -470,14 +470,14 @@ * Init must be done after driver receives "Alive" response from 4965 uCode, * and when setting up queue for aggregation. */ -#define IWL49_SCD_CONTEXT_DATA_OFFSET 0x380 -#define IWL49_SCD_CONTEXT_QUEUE_OFFSET(x) \ - (IWL49_SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) +#define IL49_SCD_CONTEXT_DATA_OFFSET 0x380 +#define IL49_SCD_CONTEXT_QUEUE_OFFSET(x) \ + (IL49_SCD_CONTEXT_DATA_OFFSET + ((x) * 8)) -#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) -#define IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) -#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) -#define IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) +#define IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS (0) +#define IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK (0x0000007F) +#define IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) +#define IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) /* * Tx Status Bitmap @@ -486,7 +486,7 @@ * "Alive" notification from uCode. Area is used only by device itself; * no other support (besides clearing) is required from driver. */ -#define IWL49_SCD_TX_STTS_BITMAP_OFFSET 0x400 +#define IL49_SCD_TX_STTS_BITMAP_OFFSET 0x400 /* * RAxTID to queue translation mapping. @@ -508,11 +508,11 @@ * must read a dword-aligned value from device SRAM, replace the 16-bit map * value of interest, and write the dword value back into device SRAM. */ -#define IWL49_SCD_TRANSLATE_TBL_OFFSET 0x500 +#define IL49_SCD_TRANSLATE_TBL_OFFSET 0x500 /* Find translation table dword to read/write for given queue */ -#define IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ - ((IWL49_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) +#define IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ + ((IL49_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffffffc) #define IL_SCD_TXFIFO_POS_TID (0) #define IL_SCD_TXFIFO_POS_RA (4) |
