summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/mscc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/mscc.c')
-rw-r--r--drivers/net/phy/mscc.c176
1 files changed, 176 insertions, 0 deletions
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index c09cc4a3d166..a17573e3bd8a 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -11,6 +11,8 @@
#include <linux/mdio.h>
#include <linux/mii.h>
#include <linux/phy.h>
+#include <linux/of.h>
+#include <dt-bindings/net/mscc-phy-vsc8531.h>
enum rgmii_rx_clock_delay {
RGMII_RX_CLK_DELAY_0_2_NS = 0,
@@ -23,10 +25,24 @@ enum rgmii_rx_clock_delay {
RGMII_RX_CLK_DELAY_3_4_NS = 7
};
+/* Microsemi VSC85xx PHY registers */
+/* IEEE 802. Std Registers */
+#define MSCC_PHY_EXT_PHY_CNTL_1 23
+#define MAC_IF_SELECTION_MASK 0x1800
+#define MAC_IF_SELECTION_GMII 0
+#define MAC_IF_SELECTION_RMII 1
+#define MAC_IF_SELECTION_RGMII 2
+#define MAC_IF_SELECTION_POS 11
+#define FAR_END_LOOPBACK_MODE_MASK 0x0008
+
#define MII_VSC85XX_INT_MASK 25
#define MII_VSC85XX_INT_MASK_MASK 0xa000
#define MII_VSC85XX_INT_STATUS 26
+#define MSCC_PHY_WOL_MAC_CONTROL 27
+#define EDGE_RATE_CNTL_POS 5
+#define EDGE_RATE_CNTL_MASK 0x00E0
+
#define MSCC_EXT_PAGE_ACCESS 31
#define MSCC_PHY_PAGE_STANDARD 0x0000 /* Standard registers */
#define MSCC_PHY_PAGE_EXTENDED_2 0x0002 /* Extended reg - page 2 */
@@ -40,6 +56,23 @@ enum rgmii_rx_clock_delay {
#define PHY_ID_VSC8531 0x00070570
#define PHY_ID_VSC8541 0x00070770
+struct edge_rate_table {
+ u16 vddmac;
+ int slowdown[MSCC_SLOWDOWN_MAX];
+};
+
+struct edge_rate_table edge_table[MSCC_VDDMAC_MAX] = {
+ {3300, { 0, -2, -4, -7, -10, -17, -29, -53} },
+ {2500, { 0, -3, -6, -10, -14, -23, -37, -63} },
+ {1800, { 0, -5, -9, -16, -23, -35, -52, -76} },
+ {1500, { 0, -6, -14, -21, -29, -42, -58, -77} },
+};
+
+struct vsc8531_private {
+ u8 edge_slowdown;
+ u16 vddmac;
+};
+
static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page)
{
int rc;
@@ -48,6 +81,87 @@ static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page)
return rc;
}
+static u8 edge_rate_magic_get(u16 vddmac,
+ int slowdown)
+{
+ int rc = (MSCC_SLOWDOWN_MAX - 1);
+ u8 vdd;
+ u8 sd;
+
+ for (vdd = 0; vdd < MSCC_VDDMAC_MAX; vdd++) {
+ if (edge_table[vdd].vddmac == vddmac) {
+ for (sd = 0; sd < MSCC_SLOWDOWN_MAX; sd++) {
+ if (edge_table[vdd].slowdown[sd] <= slowdown) {
+ rc = (MSCC_SLOWDOWN_MAX - sd - 1);
+ break;
+ }
+ }
+ }
+ }
+
+ return rc;
+}
+
+static int vsc85xx_edge_rate_cntl_set(struct phy_device *phydev,
+ u8 edge_rate)
+{
+ int rc;
+ u16 reg_val;
+
+ mutex_lock(&phydev->lock);
+ rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED_2);
+ if (rc != 0)
+ goto out_unlock;
+ reg_val = phy_read(phydev, MSCC_PHY_WOL_MAC_CONTROL);
+ reg_val &= ~(EDGE_RATE_CNTL_MASK);
+ reg_val |= (edge_rate << EDGE_RATE_CNTL_POS);
+ rc = phy_write(phydev, MSCC_PHY_WOL_MAC_CONTROL, reg_val);
+ if (rc != 0)
+ goto out_unlock;
+ rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
+
+out_unlock:
+ mutex_unlock(&phydev->lock);
+
+ return rc;
+}
+
+static int vsc85xx_mac_if_set(struct phy_device *phydev,
+ phy_interface_t interface)
+{
+ int rc;
+ u16 reg_val;
+
+ mutex_lock(&phydev->lock);
+ reg_val = phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_1);
+ reg_val &= ~(MAC_IF_SELECTION_MASK);
+ switch (interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ reg_val |= (MAC_IF_SELECTION_RGMII << MAC_IF_SELECTION_POS);
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ reg_val |= (MAC_IF_SELECTION_RMII << MAC_IF_SELECTION_POS);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ reg_val |= (MAC_IF_SELECTION_GMII << MAC_IF_SELECTION_POS);
+ break;
+ default:
+ rc = -EINVAL;
+ goto out_unlock;
+ }
+ rc = phy_write(phydev, MSCC_PHY_EXT_PHY_CNTL_1, reg_val);
+ if (rc != 0)
+ goto out_unlock;
+
+ rc = genphy_soft_reset(phydev);
+
+out_unlock:
+ mutex_unlock(&phydev->lock);
+
+ return rc;
+}
+
static int vsc85xx_default_config(struct phy_device *phydev)
{
int rc;
@@ -70,13 +184,60 @@ out_unlock:
return rc;
}
+#ifdef CONFIG_OF_MDIO
+static int vsc8531_of_init(struct phy_device *phydev)
+{
+ int rc;
+ struct vsc8531_private *vsc8531 = phydev->priv;
+ struct device *dev = &phydev->mdio.dev;
+ struct device_node *of_node = dev->of_node;
+
+ if (!of_node)
+ return -ENODEV;
+
+ rc = of_property_read_u16(of_node, "vsc8531,vddmac",
+ &vsc8531->vddmac);
+ if (rc == -EINVAL)
+ vsc8531->vddmac = MSCC_VDDMAC_3300;
+ rc = of_property_read_u8(of_node, "vsc8531,edge-slowdown",
+ &vsc8531->edge_slowdown);
+ if (rc == -EINVAL)
+ vsc8531->edge_slowdown = 0;
+
+ rc = 0;
+ return rc;
+}
+#else
+static int vsc8531_of_init(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
static int vsc85xx_config_init(struct phy_device *phydev)
{
int rc;
+ struct vsc8531_private *vsc8531 = phydev->priv;
+ u8 edge_rate;
+
+ rc = vsc8531_of_init(phydev);
+ if (rc)
+ return rc;
rc = vsc85xx_default_config(phydev);
if (rc)
return rc;
+
+ rc = vsc85xx_mac_if_set(phydev, phydev->interface);
+ if (rc)
+ return rc;
+
+ edge_rate = edge_rate_magic_get(vsc8531->vddmac,
+ -(int)vsc8531->edge_slowdown);
+ rc = vsc85xx_edge_rate_cntl_set(phydev, edge_rate);
+ if (rc)
+ return rc;
+
rc = genphy_config_init(phydev);
return rc;
@@ -109,6 +270,19 @@ static int vsc85xx_config_intr(struct phy_device *phydev)
return rc;
}
+static int vsc85xx_probe(struct phy_device *phydev)
+{
+ struct vsc8531_private *vsc8531;
+
+ vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL);
+ if (!vsc8531)
+ return -ENOMEM;
+
+ phydev->priv = vsc8531;
+
+ return 0;
+}
+
/* Microsemi VSC85xx PHYs */
static struct phy_driver vsc85xx_driver[] = {
{
@@ -126,6 +300,7 @@ static struct phy_driver vsc85xx_driver[] = {
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
+ .probe = &vsc85xx_probe,
},
{
.phy_id = PHY_ID_VSC8541,
@@ -142,6 +317,7 @@ static struct phy_driver vsc85xx_driver[] = {
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
+ .probe = &vsc85xx_probe,
}
};
OpenPOWER on IntegriCloud