summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/genet/bcmmii.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/genet/bcmmii.c')
-rw-r--r--drivers/net/ethernet/broadcom/genet/bcmmii.c117
1 files changed, 56 insertions, 61 deletions
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 970e478a9017..17bb8d60a157 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -173,6 +173,46 @@ static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
bcmgenet_fixed_phy_link_update);
}
+int bcmgenet_mii_connect(struct net_device *dev)
+{
+ struct bcmgenet_priv *priv = netdev_priv(dev);
+ struct device_node *dn = priv->pdev->dev.of_node;
+ struct phy_device *phydev;
+ u32 phy_flags = 0;
+ int ret;
+
+ /* Communicate the integrated PHY revision */
+ if (priv->internal_phy)
+ phy_flags = priv->gphy_rev;
+
+ /* Initialize link state variables that bcmgenet_mii_setup() uses */
+ priv->old_link = -1;
+ priv->old_speed = -1;
+ priv->old_duplex = -1;
+ priv->old_pause = -1;
+
+ if (dn) {
+ phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup,
+ phy_flags, priv->phy_interface);
+ if (!phydev) {
+ pr_err("could not attach to PHY\n");
+ return -ENODEV;
+ }
+ } else {
+ phydev = dev->phydev;
+ phydev->dev_flags = phy_flags;
+
+ ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup,
+ priv->phy_interface);
+ if (ret) {
+ pr_err("could not attach to PHY\n");
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
int bcmgenet_mii_config(struct net_device *dev, bool init)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
@@ -258,74 +298,29 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
*/
if (priv->ext_phy) {
reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
- reg |= RGMII_MODE_EN | id_mode_dis;
+ reg |= id_mode_dis;
+ if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv))
+ reg |= RGMII_MODE_EN_V123;
+ else
+ reg |= RGMII_MODE_EN;
bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
}
- if (init)
- dev_info(kdev, "configuring instance for %s\n", phy_name);
-
- return 0;
-}
-
-int bcmgenet_mii_probe(struct net_device *dev)
-{
- struct bcmgenet_priv *priv = netdev_priv(dev);
- struct device_node *dn = priv->pdev->dev.of_node;
- struct phy_device *phydev;
- u32 phy_flags;
- int ret;
-
- /* Communicate the integrated PHY revision */
- phy_flags = priv->gphy_rev;
-
- /* Initialize link state variables that bcmgenet_mii_setup() uses */
- priv->old_link = -1;
- priv->old_speed = -1;
- priv->old_duplex = -1;
- priv->old_pause = -1;
-
- if (dn) {
- phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup,
- phy_flags, priv->phy_interface);
- if (!phydev) {
- pr_err("could not attach to PHY\n");
- return -ENODEV;
- }
- } else {
- phydev = dev->phydev;
- phydev->dev_flags = phy_flags;
+ if (init) {
+ linkmode_copy(phydev->advertising, phydev->supported);
- ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup,
- priv->phy_interface);
- if (ret) {
- pr_err("could not attach to PHY\n");
- return -ENODEV;
- }
- }
+ /* The internal PHY has its link interrupts routed to the
+ * Ethernet MAC ISRs. On GENETv5 there is a hardware issue
+ * that prevents the signaling of link UP interrupts when
+ * the link operates at 10Mbps, so fallback to polling for
+ * those versions of GENET.
+ */
+ if (priv->internal_phy && !GENET_IS_V5(priv))
+ phydev->irq = PHY_IGNORE_INTERRUPT;
- /* Configure port multiplexer based on what the probed PHY device since
- * reading the 'max-speed' property determines the maximum supported
- * PHY speed which is needed for bcmgenet_mii_config() to configure
- * things appropriately.
- */
- ret = bcmgenet_mii_config(dev, true);
- if (ret) {
- phy_disconnect(dev->phydev);
- return ret;
+ dev_info(kdev, "configuring instance for %s\n", phy_name);
}
- linkmode_copy(phydev->advertising, phydev->supported);
-
- /* The internal PHY has its link interrupts routed to the
- * Ethernet MAC ISRs. On GENETv5 there is a hardware issue
- * that prevents the signaling of link UP interrupts when
- * the link operates at 10Mbps, so fallback to polling for
- * those versions of GENET.
- */
- if (priv->internal_phy && !GENET_IS_V5(priv))
- dev->phydev->irq = PHY_IGNORE_INTERRUPT;
-
return 0;
}
OpenPOWER on IntegriCloud