summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e/ich8lan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/ich8lan.c')
-rw-r--r--drivers/net/e1000e/ich8lan.c456
1 files changed, 407 insertions, 49 deletions
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index b2507d93de99..63930d12711c 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2009 Intel Corporation.
+ Copyright(c) 1999 - 2010 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -52,6 +52,8 @@
* 82577LC Gigabit Network Connection
* 82578DM Gigabit Network Connection
* 82578DC Gigabit Network Connection
+ * 82579LM Gigabit Network Connection
+ * 82579V Gigabit Network Connection
*/
#include "e1000.h"
@@ -126,6 +128,13 @@
#define HV_SMB_ADDR_PEC_EN 0x0200
#define HV_SMB_ADDR_VALID 0x0080
+/* PHY Power Management Control */
+#define HV_PM_CTRL PHY_REG(770, 17)
+
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL PHY_REG(772, 20)
+#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
+
/* Strapping Option Register - RO */
#define E1000_STRAP 0x0000C
#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
@@ -226,6 +235,8 @@ static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -277,13 +288,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ /*
+ * The MAC-PHY interconnect may still be in SMBus mode
+ * after Sx->S0. If the manageability engine (ME) is
+ * disabled, then toggle the LANPHYPC Value bit to force
+ * the interconnect to PCIe mode.
+ */
if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
- /*
- * The MAC-PHY interconnect may still be in SMBus mode
- * after Sx->S0. Toggle the LANPHYPC Value bit to force
- * the interconnect to PCIe mode, but only if there is no
- * firmware present otherwise firmware will have done it.
- */
ctrl = er32(CTRL);
ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
@@ -324,6 +335,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
switch (phy->type) {
case e1000_phy_82577:
+ case e1000_phy_82579:
phy->ops.check_polarity = e1000_check_polarity_82577;
phy->ops.force_speed_duplex =
e1000_phy_force_speed_duplex_82577;
@@ -515,6 +527,8 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
case e1000_ich8lan:
case e1000_ich9lan:
case e1000_ich10lan:
+ /* check management mode */
+ mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
/* ID LED init */
mac->ops.id_led_init = e1000e_id_led_init;
/* setup LED */
@@ -526,6 +540,9 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
mac->ops.led_off = e1000_led_off_ich8lan;
break;
case e1000_pchlan:
+ case e1000_pch2lan:
+ /* check management mode */
+ mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
/* ID LED init */
mac->ops.id_led_init = e1000_id_led_init_pchlan;
/* setup LED */
@@ -544,10 +561,47 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
if (mac->type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
+ /* Disable PHY configuration by hardware, config by software */
+ if (mac->type == e1000_pch2lan) {
+ u32 extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ }
+
return 0;
}
/**
+ * e1000_set_eee_pchlan - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ *
+ * Enable/disable EEE based on setting in dev_spec structure. The bits in
+ * the LPI Control register will remain set only if/when link is up.
+ **/
+static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 phy_reg;
+
+ if (hw->phy.type != e1000_phy_82579)
+ goto out;
+
+ ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
+ if (ret_val)
+ goto out;
+
+ if (hw->dev_spec.ich8lan.eee_disable)
+ phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK;
+ else
+ phy_reg |= I82579_LPI_CTRL_ENABLE_MASK;
+
+ ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
+out:
+ return ret_val;
+}
+
+/**
* e1000_check_for_copper_link_ich8lan - Check for link (Copper)
* @hw: pointer to the HW structure
*
@@ -604,6 +658,11 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
*/
e1000e_check_downshift(hw);
+ /* Enable/Disable EEE after link up */
+ ret_val = e1000_set_eee_pchlan(hw);
+ if (ret_val)
+ goto out;
+
/*
* If we are forcing speed/duplex, then we simply return since
* we have already determined whether we have link or not.
@@ -647,10 +706,19 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
if (rc)
return rc;
- if (hw->mac.type == e1000_pchlan)
- rc = e1000_init_phy_params_pchlan(hw);
- else
+ switch (hw->mac.type) {
+ case e1000_ich8lan:
+ case e1000_ich9lan:
+ case e1000_ich10lan:
rc = e1000_init_phy_params_ich8lan(hw);
+ break;
+ case e1000_pchlan:
+ case e1000_pch2lan:
+ rc = e1000_init_phy_params_pchlan(hw);
+ break;
+ default:
+ break;
+ }
if (rc)
return rc;
@@ -663,6 +731,10 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
(adapter->hw.phy.type == e1000_phy_igp_3))
adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
+ /* Disable EEE by default until IEEE802.3az spec is finalized */
+ if (adapter->flags2 & FLAG2_HAS_EEE)
+ adapter->hw.dev_spec.ich8lan.eee_disable = true;
+
return 0;
}
@@ -774,7 +846,7 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
* e1000_check_mng_mode_ich8lan - Checks management mode
* @hw: pointer to the HW structure
*
- * This checks if the adapter has manageability enabled.
+ * This checks if the adapter has any manageability enabled.
* This is a function pointer entry point only called by read/write
* routines for the PHY and NVM parts.
**/
@@ -783,9 +855,26 @@ static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
u32 fwsm;
fwsm = er32(FWSM);
+ return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+
+/**
+ * e1000_check_mng_mode_pchlan - Checks management mode
+ * @hw: pointer to the HW structure
+ *
+ * This checks if the adapter has iAMT enabled.
+ * This is a function pointer entry point only called by read/write
+ * routines for the PHY and NVM parts.
+ **/
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw)
+{
+ u32 fwsm;
- return (fwsm & E1000_FWSM_MODE_MASK) ==
- (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
+ fwsm = er32(FWSM);
+ return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+ (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
}
/**
@@ -820,14 +909,6 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
s32 ret_val = 0;
u16 word_addr, reg_data, reg_addr, phy_page = 0;
- if (!(hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) &&
- !(hw->mac.type == e1000_pchlan))
- return ret_val;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
/*
* Initialize the PHY from the NVM on ICH platforms. This
* is needed due to an issue where the NVM configuration is
@@ -835,12 +916,27 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
* Therefore, after each PHY reset, we will load the
* configuration data out of the NVM manually.
*/
- if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
- (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) ||
- (hw->mac.type == e1000_pchlan))
+ switch (hw->mac.type) {
+ case e1000_ich8lan:
+ if (phy->type != e1000_phy_igp_3)
+ return ret_val;
+
+ if (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) {
+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+ break;
+ }
+ /* Fall-thru */
+ case e1000_pchlan:
+ case e1000_pch2lan:
sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
- else
- sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+ break;
+ default:
+ return ret_val;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
data = er32(FEXTNVM);
if (!(data & sw_cfg_mask))
@@ -851,8 +947,10 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
* extended configuration before SW configuration
*/
data = er32(EXTCNF_CTRL);
- if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
- goto out;
+ if (!(hw->mac.type == e1000_pch2lan)) {
+ if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+ goto out;
+ }
cnf_size = er32(EXTCNF_SIZE);
cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
@@ -864,7 +962,8 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
- (hw->mac.type == e1000_pchlan)) {
+ ((hw->mac.type == e1000_pchlan) ||
+ (hw->mac.type == e1000_pch2lan))) {
/*
* HW configures the SMBus address and LEDs when the
* OEM and LCD Write Enable bits are set in the NVM.
@@ -1071,16 +1170,18 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
u32 mac_reg;
u16 oem_reg;
- if (hw->mac.type != e1000_pchlan)
+ if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pchlan))
return ret_val;
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
- mac_reg = er32(EXTCNF_CTRL);
- if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
- goto out;
+ if (!(hw->mac.type == e1000_pch2lan)) {
+ mac_reg = er32(EXTCNF_CTRL);
+ if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
+ goto out;
+ }
mac_reg = er32(FEXTNVM);
if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
@@ -1221,6 +1322,243 @@ out:
}
/**
+ * e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY
+ * @hw: pointer to the HW structure
+ **/
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
+{
+ u32 mac_reg;
+ u16 i;
+
+ /* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */
+ for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+ mac_reg = er32(RAL(i));
+ e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
+ e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
+ mac_reg = er32(RAH(i));
+ e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
+ e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0x8000));
+ }
+}
+
+static u32 e1000_calc_rx_da_crc(u8 mac[])
+{
+ u32 poly = 0xEDB88320; /* Polynomial for 802.3 CRC calculation */
+ u32 i, j, mask, crc;
+
+ crc = 0xffffffff;
+ for (i = 0; i < 6; i++) {
+ crc = crc ^ mac[i];
+ for (j = 8; j > 0; j--) {
+ mask = (crc & 1) * (-1);
+ crc = (crc >> 1) ^ (poly & mask);
+ }
+ }
+ return ~crc;
+}
+
+/**
+ * e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
+ * with 82579 PHY
+ * @hw: pointer to the HW structure
+ * @enable: flag to enable/disable workaround when enabling/disabling jumbos
+ **/
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
+{
+ s32 ret_val = 0;
+ u16 phy_reg, data;
+ u32 mac_reg;
+ u16 i;
+
+ if (hw->mac.type != e1000_pch2lan)
+ goto out;
+
+ /* disable Rx path while enabling/disabling workaround */
+ e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14));
+ if (ret_val)
+ goto out;
+
+ if (enable) {
+ /*
+ * Write Rx addresses (rar_entry_count for RAL/H, +4 for
+ * SHRAL/H) and initial CRC values to the MAC
+ */
+ for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+ u8 mac_addr[ETH_ALEN] = {0};
+ u32 addr_high, addr_low;
+
+ addr_high = er32(RAH(i));
+ if (!(addr_high & E1000_RAH_AV))
+ continue;
+ addr_low = er32(RAL(i));
+ mac_addr[0] = (addr_low & 0xFF);
+ mac_addr[1] = ((addr_low >> 8) & 0xFF);
+ mac_addr[2] = ((addr_low >> 16) & 0xFF);
+ mac_addr[3] = ((addr_low >> 24) & 0xFF);
+ mac_addr[4] = (addr_high & 0xFF);
+ mac_addr[5] = ((addr_high >> 8) & 0xFF);
+
+ ew32(PCH_RAICC(i),
+ e1000_calc_rx_da_crc(mac_addr));
+ }
+
+ /* Write Rx addresses to the PHY */
+ e1000_copy_rx_addrs_to_phy_ich8lan(hw);
+
+ /* Enable jumbo frame workaround in the MAC */
+ mac_reg = er32(FFLT_DBG);
+ mac_reg &= ~(1 << 14);
+ mac_reg |= (7 << 15);
+ ew32(FFLT_DBG, mac_reg);
+
+ mac_reg = er32(RCTL);
+ mac_reg |= E1000_RCTL_SECRC;
+ ew32(RCTL, mac_reg);
+
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ &data);
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ data | (1 << 0));
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ &data);
+ if (ret_val)
+ goto out;
+ data &= ~(0xF << 8);
+ data |= (0xB << 8);
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Enable jumbo frame workaround in the PHY */
+ e1e_rphy(hw, PHY_REG(769, 20), &data);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14));
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(769, 23), &data);
+ data &= ~(0x7F << 5);
+ data |= (0x37 << 5);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(769, 16), &data);
+ data &= ~(1 << 13);
+ data |= (1 << 12);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(776, 20), &data);
+ data &= ~(0x3FF << 2);
+ data |= (0x1A << 2);
+ ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+ if (ret_val)
+ goto out;
+ ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xFE00);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, HV_PM_CTRL, &data);
+ ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10));
+ if (ret_val)
+ goto out;
+ } else {
+ /* Write MAC register values back to h/w defaults */
+ mac_reg = er32(FFLT_DBG);
+ mac_reg &= ~(0xF << 14);
+ ew32(FFLT_DBG, mac_reg);
+
+ mac_reg = er32(RCTL);
+ mac_reg &= ~E1000_RCTL_SECRC;
+ ew32(FFLT_DBG, mac_reg);
+
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ &data);
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ data & ~(1 << 0));
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ &data);
+ if (ret_val)
+ goto out;
+ data &= ~(0xF << 8);
+ data |= (0xB << 8);
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Write PHY register values back to h/w defaults */
+ e1e_rphy(hw, PHY_REG(769, 20), &data);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14));
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(769, 23), &data);
+ data &= ~(0x7F << 5);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(769, 16), &data);
+ data &= ~(1 << 12);
+ data |= (1 << 13);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(776, 20), &data);
+ data &= ~(0x3FF << 2);
+ data |= (0x8 << 2);
+ ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+ if (ret_val)
+ goto out;
+ ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, HV_PM_CTRL, &data);
+ ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10));
+ if (ret_val)
+ goto out;
+ }
+
+ /* re-enable Rx path after enabling/disabling workaround */
+ ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+ * done after every PHY reset.
+ **/
+static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ if (hw->mac.type != e1000_pch2lan)
+ goto out;
+
+ /* Set MDIO slow mode before any other MDIO access */
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+
+out:
+ return ret_val;
+}
+
+/**
* e1000_lan_init_done_ich8lan - Check for PHY config completion
* @hw: pointer to the HW structure
*
@@ -1271,12 +1609,17 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
if (ret_val)
goto out;
break;
+ case e1000_pch2lan:
+ ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
+ if (ret_val)
+ goto out;
+ break;
default:
break;
}
/* Dummy read to clear the phy wakeup bit after lcd reset */
- if (hw->mac.type == e1000_pchlan)
+ if (hw->mac.type >= e1000_pchlan)
e1e_rphy(hw, BM_WUC, &reg);
/* Configure the LCD with the extended configuration region in NVM */
@@ -2800,6 +3143,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
ew32(FCTTV, hw->fc.pause_time);
if ((hw->phy.type == e1000_phy_82578) ||
+ (hw->phy.type == e1000_phy_82579) ||
(hw->phy.type == e1000_phy_82577)) {
ew32(FCRTV_PCH, hw->fc.refresh_time);
@@ -2863,6 +3207,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
return ret_val;
break;
case e1000_phy_82577:
+ case e1000_phy_82579:
ret_val = e1000_copper_link_setup_82577(hw);
if (ret_val)
return ret_val;
@@ -3116,21 +3461,12 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
{
u32 phy_ctrl;
- switch (hw->mac.type) {
- case e1000_ich8lan:
- case e1000_ich9lan:
- case e1000_ich10lan:
- case e1000_pchlan:
- phy_ctrl = er32(PHY_CTRL);
- phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU |
- E1000_PHY_CTRL_GBE_DISABLE;
- ew32(PHY_CTRL, phy_ctrl);
+ phy_ctrl = er32(PHY_CTRL);
+ phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE;
+ ew32(PHY_CTRL, phy_ctrl);
- if (hw->mac.type == e1000_pchlan)
- e1000_phy_hw_reset_ich8lan(hw);
- default:
- break;
- }
+ if (hw->mac.type >= e1000_pchlan)
+ e1000_phy_hw_reset_ich8lan(hw);
}
/**
@@ -3370,6 +3706,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
/* Clear PHY statistics registers */
if ((hw->phy.type == e1000_phy_82578) ||
+ (hw->phy.type == e1000_phy_82579) ||
(hw->phy.type == e1000_phy_82577)) {
hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data);
hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data);
@@ -3390,7 +3727,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
static struct e1000_mac_operations ich8_mac_ops = {
.id_led_init = e1000e_id_led_init,
- .check_mng_mode = e1000_check_mng_mode_ich8lan,
+ /* check_mng_mode dependent on mac type */
.check_for_link = e1000_check_for_copper_link_ich8lan,
/* cleanup_led dependent on mac type */
.clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
@@ -3497,6 +3834,7 @@ struct e1000_info e1000_pch_info = {
| FLAG_HAS_JUMBO_FRAMES
| FLAG_DISABLE_FC_PAUSE_TIME /* errata */
| FLAG_APME_IN_WUC,
+ .flags2 = FLAG2_HAS_PHY_STATS,
.pba = 26,
.max_hw_frame_size = 4096,
.get_variants = e1000_get_variants_ich8lan,
@@ -3504,3 +3842,23 @@ struct e1000_info e1000_pch_info = {
.phy_ops = &ich8_phy_ops,
.nvm_ops = &ich8_nvm_ops,
};
+
+struct e1000_info e1000_pch2_info = {
+ .mac = e1000_pch2lan,
+ .flags = FLAG_IS_ICH
+ | FLAG_HAS_WOL
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT
+ | FLAG_HAS_FLASH
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_APME_IN_WUC,
+ .flags2 = FLAG2_HAS_PHY_STATS
+ | FLAG2_HAS_EEE,
+ .pba = 18,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_ich8lan,
+ .mac_ops = &ich8_mac_ops,
+ .phy_ops = &ich8_phy_ops,
+ .nvm_ops = &ich8_nvm_ops,
+};
OpenPOWER on IntegriCloud