summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/bcm_umi_nand.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/bcm_umi_nand.c')
-rw-r--r--drivers/mtd/nand/bcm_umi_nand.c57
1 files changed, 21 insertions, 36 deletions
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 8c569e454dc5..46b58d672847 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -52,8 +52,6 @@
static const __devinitconst char gBanner[] = KERN_INFO \
"BCM UMI MTD NAND Driver: 1.00\n";
-const char *part_probes[] = { "cmdlinepart", NULL };
-
#if NAND_ECC_BCH
static uint8_t scan_ff_pattern[] = { 0xff };
@@ -376,16 +374,18 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r)
- return -ENXIO;
+ if (!r) {
+ err = -ENXIO;
+ goto out_free;
+ }
/* map physical address */
bcm_umi_io_base = ioremap(r->start, resource_size(r));
if (!bcm_umi_io_base) {
printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n");
- kfree(board_mtd);
- return -EIO;
+ err = -EIO;
+ goto out_free;
}
/* Get pointer to private data */
@@ -401,9 +401,8 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
/* Initialize the NAND hardware. */
if (bcm_umi_nand_inithw() < 0) {
printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n");
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return -EIO;
+ err = -EIO;
+ goto out_unmap;
}
/* Set address of NAND IO lines */
@@ -436,7 +435,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
#if USE_DMA
err = nand_dma_init();
if (err != 0)
- return err;
+ goto out_unmap;
#endif
/* Figure out the size of the device that we have.
@@ -447,9 +446,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
err = nand_scan_ident(board_mtd, 1, NULL);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return err;
+ goto out_unmap;
}
/* Now that we know the nand size, we can setup the ECC layout */
@@ -468,13 +465,14 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
{
printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n",
board_mtd->writesize);
- return -EINVAL;
+ err = -EINVAL;
+ goto out_unmap;
}
}
#if NAND_ECC_BCH
if (board_mtd->writesize > 512) {
- if (this->options & NAND_USE_FLASH_BBT)
+ if (this->bbt_options & NAND_BBT_USE_FLASH)
largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
this->badblock_pattern = &largepage_bbt;
}
@@ -485,33 +483,20 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
err = nand_scan_tail(board_mtd);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return err;
+ goto out_unmap;
}
/* Register the partitions */
- {
- int nr_partitions;
- struct mtd_partition *partition_info;
-
- board_mtd->name = "bcm_umi-nand";
- nr_partitions =
- parse_mtd_partitions(board_mtd, part_probes,
- &partition_info, 0);
-
- if (nr_partitions <= 0) {
- printk(KERN_ERR "BCM UMI NAND: Too few partitions - %d\n",
- nr_partitions);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return -EIO;
- }
- mtd_device_register(board_mtd, partition_info, nr_partitions);
- }
+ board_mtd->name = "bcm_umi-nand";
+ mtd_device_parse_register(board_mtd, NULL, 0, NULL, 0);
/* Return happy */
return 0;
+out_unmap:
+ iounmap(bcm_umi_io_base);
+out_free:
+ kfree(board_mtd);
+ return err;
}
static int bcm_umi_nand_remove(struct platform_device *pdev)
OpenPOWER on IntegriCloud