diff options
Diffstat (limited to 'drivers/message/fusion/lsi/mpi_log_sas.h')
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_log_sas.h | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h new file mode 100644 index 000000000000..9259d1ad6e6e --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_log_sas.h @@ -0,0 +1,162 @@ + +/*************************************************************************** + * * + * Copyright 2003 LSI Logic Corporation. All rights reserved. * + * * + * This file is confidential and a trade secret of LSI Logic. The * + * receipt of or possession of this file does not convey any rights to * + * reproduce or disclose its contents or to manufacture, use, or sell * + * anything it may describe, in whole, or in part, without the specific * + * written consent of LSI Logic Corporation. * + * * + *************************************************************************** + * + * Name: iopiIocLogInfo.h + * Title: SAS Firmware IOP Interface IOC Log Info Definitions + * Programmer: Guy Kendall + * Creation Date: September 24, 2003 + * + * Version History + * --------------- + * + * Last Updated + * ------------- + * Version %version: 22 % + * Date Updated %date_modified: % + * Programmer %created_by: nperucca % + * + * Date Who Description + * -------- --- ------------------------------------------------------- + * 09/24/03 GWK Initial version + * + * + * Description + * ------------ + * This include file contains SAS firmware interface IOC Log Info codes + * + *------------------------------------------------------------------------- + */ + +#ifndef IOPI_IOCLOGINFO_H_INCLUDED +#define IOPI_IOCLOGINFO_H_INCLUDED + + +/****************************************************************************/ +/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */ +/* Format: */ +/* Bits 31-28: MPI_IOCLOGINFO_TYPE_SAS (3) */ +/* Bits 27-24: IOC_LOGINFO_ORIGINATOR: 0=IOP, 1=PL, 2=IR */ +/* Bits 23-16: LOGINFO_CODE */ +/* Bits 15-0: LOGINFO_CODE Specific */ +/****************************************************************************/ + +/****************************************************************************/ +/* IOC_LOGINFO_ORIGINATOR defines */ +/****************************************************************************/ +#define IOC_LOGINFO_ORIGINATOR_IOP (0x00000000) +#define IOC_LOGINFO_ORIGINATOR_PL (0x01000000) +#define IOC_LOGINFO_ORIGINATOR_IR (0x02000000) + +/****************************************************************************/ +/* LOGINFO_CODE defines */ +/****************************************************************************/ +#define IOC_LOGINFO_CODE_MASK (0x00FF0000) +#define IOC_LOGINFO_CODE_SHIFT (16) + +/****************************************************************************/ +/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP */ +/****************************************************************************/ +#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000) +#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000) +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000) +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */ +#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000) + + +/****************************************************************************/ +/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */ +/****************************************************************************/ +#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000) +#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000) +#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000) +#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000) +#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000) +#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000) +#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000) +#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000) +#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000) +#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000) +#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000) +#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000) +#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000) +#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000) +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000) +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */ +#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000) +#define PL_LOGINFO_CODE_RESET (0x00110000) +#define PL_LOGINFO_CODE_ABORT (0x00120000) +#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000) +#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000) +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100) +#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200) +#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300) +#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) +#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500) +#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600) +#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700) +#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800) +#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900) +#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00) +#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00) +#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00) +#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00) +#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00) +#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000) + + +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200001) /* Error occured on SMP Read */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200002) /* Error occured on SMP Write */ +#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200004) /* Encl Mgmt services not available for this WWID */ +#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200005) /* Address Mode not suppored */ +#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200006) /* Invalid Slot Number in SEP Msg */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200007) /* SGPIO not present/enabled */ + +#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */ +#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */ +#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */ +#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */ +#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200104) /* SEP stopped or sent bad chksum in Hdr */ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200105) /* SEP returned unknown scsi status */ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200106) /* SEP returned unknown scsi status */ +#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x00200107) /* SEP returned bad chksum after STOP */ +#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/ + + +/****************************************************************************/ +/* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */ +/****************************************************************************/ +#define IR_LOGINFO_CODE_UNUSED1 (0x00010000) +#define IR_LOGINFO_CODE_UNUSED2 (0x00020000) + +/****************************************************************************/ +/* Defines for convienence */ +/****************************************************************************/ +#define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP) +#define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL) +#define IOC_LOGINFO_PREFIX_IR ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IR) + +#endif /* end of file */ + |
