diff options
Diffstat (limited to 'drivers/media/parport/w9966.c')
| -rw-r--r-- | drivers/media/parport/w9966.c | 980 |
1 files changed, 0 insertions, 980 deletions
diff --git a/drivers/media/parport/w9966.c b/drivers/media/parport/w9966.c deleted file mode 100644 index f7502f3a6a3c..000000000000 --- a/drivers/media/parport/w9966.c +++ /dev/null @@ -1,980 +0,0 @@ -/* - Winbond w9966cf Webcam parport driver. - - Version 0.33 - - Copyright (C) 2001 Jakob Kemi <jakob.kemi@post.utfors.se> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -/* - Supported devices: - *Lifeview FlyCam Supra (using the Philips saa7111a chip) - - Does any other model using the w9966 interface chip exist ? - - Todo: - - *Add a working EPP mode, since DMA ECP read isn't implemented - in the parport drivers. (That's why it's so sloow) - - *Add support for other ccd-control chips than the saa7111 - please send me feedback on what kind of chips you have. - - *Add proper probing. I don't know what's wrong with the IEEE1284 - parport drivers but (IEEE1284_MODE_NIBBLE|IEEE1284_DEVICE_ID) - and nibble read seems to be broken for some peripherals. - - *Add probing for onboard SRAM, port directions etc. (if possible) - - *Add support for the hardware compressed modes (maybe using v4l2) - - *Fix better support for the capture window (no skewed images, v4l - interface to capt. window) - - *Probably some bugs that I don't know of - - Please support me by sending feedback! - - Changes: - - Alan Cox: Removed RGB mode for kernel merge, added THIS_MODULE - and owner support for newer module locks -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/videodev2.h> -#include <linux/slab.h> -#include <media/v4l2-common.h> -#include <media/v4l2-ioctl.h> -#include <media/v4l2-device.h> -#include <media/v4l2-fh.h> -#include <media/v4l2-ctrls.h> -#include <media/v4l2-event.h> -#include <linux/parport.h> - -/*#define DEBUG*/ /* Undef me for production */ - -#ifdef DEBUG -#define DPRINTF(x, a...) printk(KERN_DEBUG "W9966: %s(): "x, __func__ , ##a) -#else -#define DPRINTF(x...) -#endif - -/* - * Defines, simple typedefs etc. - */ - -#define W9966_DRIVERNAME "W9966CF Webcam" -#define W9966_MAXCAMS 4 /* Maximum number of cameras */ -#define W9966_RBUFFER 2048 /* Read buffer (must be an even number) */ -#define W9966_SRAMSIZE 131072 /* 128kb */ -#define W9966_SRAMID 0x02 /* check w9966cf.pdf */ - -/* Empirically determined window limits */ -#define W9966_WND_MIN_X 16 -#define W9966_WND_MIN_Y 14 -#define W9966_WND_MAX_X 705 -#define W9966_WND_MAX_Y 253 -#define W9966_WND_MAX_W (W9966_WND_MAX_X - W9966_WND_MIN_X) -#define W9966_WND_MAX_H (W9966_WND_MAX_Y - W9966_WND_MIN_Y) - -/* Keep track of our current state */ -#define W9966_STATE_PDEV 0x01 -#define W9966_STATE_CLAIMED 0x02 -#define W9966_STATE_VDEV 0x04 - -#define W9966_I2C_W_ID 0x48 -#define W9966_I2C_R_ID 0x49 -#define W9966_I2C_R_DATA 0x08 -#define W9966_I2C_R_CLOCK 0x04 -#define W9966_I2C_W_DATA 0x02 -#define W9966_I2C_W_CLOCK 0x01 - -struct w9966 { - struct v4l2_device v4l2_dev; - struct v4l2_ctrl_handler hdl; - unsigned char dev_state; - unsigned char i2c_state; - unsigned short ppmode; - struct parport *pport; - struct pardevice *pdev; - struct video_device vdev; - unsigned short width; - unsigned short height; - unsigned char brightness; - signed char contrast; - signed char color; - signed char hue; - struct mutex lock; -}; - -/* - * Module specific properties - */ - -MODULE_AUTHOR("Jakob Kemi <jakob.kemi@post.utfors.se>"); -MODULE_DESCRIPTION("Winbond w9966cf WebCam driver (0.32)"); -MODULE_LICENSE("GPL"); -MODULE_VERSION("0.33.1"); - -#ifdef MODULE -static char *pardev[] = {[0 ... W9966_MAXCAMS] = ""}; -#else -static char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"}; -#endif -module_param_array(pardev, charp, NULL, 0); -MODULE_PARM_DESC(pardev, "pardev: where to search for\n" - "\teach camera. 'aggressive' means brute-force search.\n" - "\tEg: >pardev=parport3,aggressive,parport2,parport1< would assign\n" - "\tcam 1 to parport3 and search every parport for cam 2 etc..."); - -static int parmode; -module_param(parmode, int, 0); -MODULE_PARM_DESC(parmode, "parmode: transfer mode (0=auto, 1=ecp, 2=epp"); - -static int video_nr = -1; -module_param(video_nr, int, 0); - -static struct w9966 w9966_cams[W9966_MAXCAMS]; - -/* - * Private function defines - */ - - -/* Set camera phase flags, so we know what to uninit when terminating */ -static inline void w9966_set_state(struct w9966 *cam, int mask, int val) -{ - cam->dev_state = (cam->dev_state & ~mask) ^ val; -} - -/* Get camera phase flags */ -static inline int w9966_get_state(struct w9966 *cam, int mask, int val) -{ - return ((cam->dev_state & mask) == val); -} - -/* Claim parport for ourself */ -static void w9966_pdev_claim(struct w9966 *cam) -{ - if (w9966_get_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED)) - return; - parport_claim_or_block(cam->pdev); - w9966_set_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED); -} - -/* Release parport for others to use */ -static void w9966_pdev_release(struct w9966 *cam) -{ - if (w9966_get_state(cam, W9966_STATE_CLAIMED, 0)) - return; - parport_release(cam->pdev); - w9966_set_state(cam, W9966_STATE_CLAIMED, 0); -} - -/* Read register from W9966 interface-chip - Expects a claimed pdev - -1 on error, else register data (byte) */ -static int w9966_read_reg(struct w9966 *cam, int reg) -{ - /* ECP, read, regtransfer, REG, REG, REG, REG, REG */ - const unsigned char addr = 0x80 | (reg & 0x1f); - unsigned char val; - - if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0) - return -1; - if (parport_write(cam->pport, &addr, 1) != 1) - return -1; - if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0) - return -1; - if (parport_read(cam->pport, &val, 1) != 1) - return -1; - - return val; -} - -/* Write register to W9966 interface-chip - Expects a claimed pdev - -1 on error */ -static int w9966_write_reg(struct w9966 *cam, int reg, int data) -{ - /* ECP, write, regtransfer, REG, REG, REG, REG, REG */ - const unsigned char addr = 0xc0 | (reg & 0x1f); - const unsigned char val = data; - - if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0) - return -1; - if (parport_write(cam->pport, &addr, 1) != 1) - return -1; - if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0) - return -1; - if (parport_write(cam->pport, &val, 1) != 1) - return -1; - - return 0; -} - -/* - * Ugly and primitive i2c protocol functions - */ - -/* Sets the data line on the i2c bus. - Expects a claimed pdev. */ -static void w9966_i2c_setsda(struct w9966 *cam, int state) -{ - if (state) - cam->i2c_state |= W9966_I2C_W_DATA; - else - cam->i2c_state &= ~W9966_I2C_W_DATA; - - w9966_write_reg(cam, 0x18, cam->i2c_state); - udelay(5); -} - -/* Get peripheral clock line - Expects a claimed pdev. */ -static int w9966_i2c_getscl(struct w9966 *cam) -{ - const unsigned char state = w9966_read_reg(cam, 0x18); - return ((state & W9966_I2C_R_CLOCK) > 0); -} - -/* Sets the clock line on the i2c bus. - Expects a claimed pdev. -1 on error */ -static int w9966_i2c_setscl(struct w9966 *cam, int state) -{ - unsigned long timeout; - - if (state) - cam->i2c_state |= W9966_I2C_W_CLOCK; - else - cam->i2c_state &= ~W9966_I2C_W_CLOCK; - - w9966_write_reg(cam, 0x18, cam->i2c_state); - udelay(5); - - /* we go to high, we also expect the peripheral to ack. */ - if (state) { - timeout = jiffies + 100; - while (!w9966_i2c_getscl(cam)) { - if (time_after(jiffies, timeout)) - return -1; - } - } - return 0; -} - -#if 0 -/* Get peripheral data line - Expects a claimed pdev. */ -static int w9966_i2c_getsda(struct w9966 *cam) -{ - const unsigned char state = w9966_read_reg(cam, 0x18); - return ((state & W9966_I2C_R_DATA) > 0); -} -#endif - -/* Write a byte with ack to the i2c bus. - Expects a claimed pdev. -1 on error */ -static int w9966_i2c_wbyte(struct w9966 *cam, int data) -{ - int i; - - for (i = 7; i >= 0; i--) { - w9966_i2c_setsda(cam, (data >> i) & 0x01); - - if (w9966_i2c_setscl(cam, 1) == -1) - return -1; - w9966_i2c_setscl(cam, 0); - } - - w9966_i2c_setsda(cam, 1); - - if (w9966_i2c_setscl(cam, 1) == -1) - return -1; - w9966_i2c_setscl(cam, 0); - - return 0; -} - -/* Read a data byte with ack from the i2c-bus - Expects a claimed pdev. -1 on error */ -#if 0 -static int w9966_i2c_rbyte(struct w9966 *cam) -{ - unsigned char data = 0x00; - int i; - - w9966_i2c_setsda(cam, 1); - - for (i = 0; i < 8; i++) { - if (w9966_i2c_setscl(cam, 1) == -1) - return -1; - data = data << 1; - if (w9966_i2c_getsda(cam)) - data |= 0x01; - - w9966_i2c_setscl(cam, 0); - } - return data; -} -#endif - -/* Read a register from the i2c device. - Expects claimed pdev. -1 on error */ -#if 0 -static int w9966_read_reg_i2c(struct w9966 *cam, int reg) -{ - int data; - - w9966_i2c_setsda(cam, 0); - w9966_i2c_setscl(cam, 0); - - if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 || - w9966_i2c_wbyte(cam, reg) == -1) - return -1; - - w9966_i2c_setsda(cam, 1); - if (w9966_i2c_setscl(cam, 1) == -1) - return -1; - w9966_i2c_setsda(cam, 0); - w9966_i2c_setscl(cam, 0); - - if (w9966_i2c_wbyte(cam, W9966_I2C_R_ID) == -1) - return -1; - data = w9966_i2c_rbyte(cam); - if (data == -1) - return -1; - - w9966_i2c_setsda(cam, 0); - - if (w9966_i2c_setscl(cam, 1) == -1) - return -1; - w9966_i2c_setsda(cam, 1); - - return data; -} -#endif - -/* Write a register to the i2c device. - Expects claimed pdev. -1 on error */ -static int w9966_write_reg_i2c(struct w9966 *cam, int reg, int data) -{ - w9966_i2c_setsda(cam, 0); - w9966_i2c_setscl(cam, 0); - - if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 || - w9966_i2c_wbyte(cam, reg) == -1 || - w9966_i2c_wbyte(cam, data) == -1) - return -1; - - w9966_i2c_setsda(cam, 0); - if (w9966_i2c_setscl(cam, 1) == -1) - return -1; - - w9966_i2c_setsda(cam, 1); - - return 0; -} - -/* Find a good length for capture window (used both for W and H) - A bit ugly but pretty functional. The capture length - have to match the downscale */ -static int w9966_findlen(int near, int size, int maxlen) -{ - int bestlen = size; - int besterr = abs(near - bestlen); - int len; - - for (len = size + 1; len < maxlen; len++) { - int err; - if (((64 * size) % len) != 0) - continue; - - err = abs(near - len); - - /* Only continue as long as we keep getting better values */ - if (err > besterr) - break; - - besterr = err; - bestlen = len; - } - - return bestlen; -} - -/* Modify capture window (if necessary) - and calculate downscaling - Return -1 on error */ -static int w9966_calcscale(int size, int min, int max, int *beg, int *end, unsigned char *factor) -{ - int maxlen = max - min; - int len = *end - *beg + 1; - int newlen = w9966_findlen(len, size, maxlen); - int err = newlen - len; - - /* Check for bad format */ - if (newlen > maxlen || newlen < size) - return -1; - - /* Set factor (6 bit fixed) */ - *factor = (64 * size) / newlen; - if (*factor == 64) - *factor = 0x00; /* downscale is disabled */ - else - *factor |= 0x80; /* set downscale-enable bit */ - - /* Modify old beginning and end */ - *beg -= err / 2; - *end += err - (err / 2); - - /* Move window if outside borders */ - if (*beg < min) { - *end += min - *beg; - *beg += min - *beg; - } - if (*end > max) { - *beg -= *end - max; - *end -= *end - max; - } - - return 0; -} - -/* Setup the cameras capture window etc. - Expects a claimed pdev - return -1 on error */ -static int w9966_setup(struct w9966 *cam, int x1, int y1, int x2, int y2, int w, int h) -{ - unsigned int i; - unsigned int enh_s, enh_e; - unsigned char scale_x, scale_y; - unsigned char regs[0x1c]; - unsigned char saa7111_regs[] = { - 0x21, 0x00, 0xd8, 0x23, 0x00, 0x80, 0x80, 0x00, - 0x88, 0x10, 0x80, 0x40, 0x40, 0x00, 0x01, 0x00, - 0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0 - }; - - - if (w * h * 2 > W9966_SRAMSIZE) { - DPRINTF("capture window exceeds SRAM size!.\n"); - w = 200; h = 160; /* Pick default values */ - } - - w &= ~0x1; - if (w < 2) - w = 2; - if (h < 1) - h = 1; - if (w > W9966_WND_MAX_W) - w = W9966_WND_MAX_W; - if (h > W9966_WND_MAX_H) - h = W9966_WND_MAX_H; - - cam->width = w; - cam->height = h; - - enh_s = 0; - enh_e = w * h * 2; - - /* Modify capture window if necessary and calculate downscaling */ - if (w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 || - w9966_calcscale(h, W9966_WND_MIN_Y, W9966_WND_MAX_Y, &y1, &y2, &scale_y) != 0) - return -1; - - DPRINTF("%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n", - w, h, x1, x2, y1, y2, scale_x & ~0x80, scale_y & ~0x80); - - /* Setup registers */ - regs[0x00] = 0x00; /* Set normal operation */ - regs[0x01] = 0x18; /* Capture mode */ - regs[0x02] = scale_y; /* V-scaling */ - regs[0x03] = scale_x; /* H-scaling */ - - /* Capture window */ - regs[0x04] = (x1 & 0x0ff); /* X-start (8 low bits) */ - regs[0x05] = (x1 & 0x300)>>8; /* X-start (2 high bits) */ - regs[0x06] = (y1 & 0x0ff); /* Y-start (8 low bits) */ - regs[0x07] = (y1 & 0x300)>>8; /* Y-start (2 high bits) */ - regs[0x08] = (x2 & 0x0ff); /* X-end (8 low bits) */ - regs[0x09] = (x2 & 0x300)>>8; /* X-end (2 high bits) */ - regs[0x0a] = (y2 & 0x0ff); /* Y-end (8 low bits) */ - - regs[0x0c] = W9966_SRAMID; /* SRAM-banks (1x 128kb) */ - - /* Enhancement layer */ - regs[0x0d] = (enh_s & 0x000ff); /* Enh. start (0-7) */ - regs[0x0e] = (enh_s & 0x0ff00) >> 8; /* Enh. start (8-15) */ - regs[0x0f] = (enh_s & 0x70000) >> 16; /* Enh. start (16-17/18??) */ - regs[0x10] = (enh_e & 0x000ff); /* Enh. end (0-7) */ - regs[0x11] = (enh_e & 0x0ff00) >> 8; /* Enh. end (8-15) */ - regs[0x12] = (enh_e & 0x70000) >> 16; /* Enh. end (16-17/18??) */ - - /* Misc */ - regs[0x13] = 0x40; /* VEE control (raw 4:2:2) */ - regs[0x17] = 0x00; /* ??? */ - regs[0x18] = cam->i2c_state = 0x00; /* Serial bus */ - regs[0x19] = 0xff; /* I/O port direction control */ - regs[0x1a] = 0xff; /* I/O port data register */ - regs[0x1b] = 0x10; /* ??? */ - - /* SAA7111 chip settings */ - saa7111_regs[0x0a] = cam->brightness; - saa7111_regs[0x0b] = cam->contrast; - saa7111_regs[0x0c] = cam->color; - saa7111_regs[0x0d] = cam->hue; - - /* Reset (ECP-fifo & serial-bus) */ - if (w9966_write_reg(cam, 0x00, 0x03) == -1) - return -1; - - /* Write regs to w9966cf chip */ - for (i = 0; i < 0x1c; i++) - if (w9966_write_reg(cam, i, regs[i]) == -1) - return -1; - - /* Write regs to saa7111 chip */ - for (i = 0; i < 0x20; i++) - if (w9966_write_reg_i2c(cam, i, saa7111_regs[i]) == -1) - return -1; - - return 0; -} - -/* - * Video4linux interfacing - */ - -static int cam_querycap(struct file *file, void *priv, - struct v4l2_capability *vcap) -{ - struct w9966 *cam = video_drvdata(file); - - strlcpy(vcap->driver, cam->v4l2_dev.name, sizeof(vcap->driver)); - strlcpy(vcap->card, W9966_DRIVERNAME, sizeof(vcap->card)); - strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); - vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; - vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS; - return 0; -} - -static int cam_enum_input(struct file *file, void *fh, struct v4l2_input *vin) -{ - if (vin->index > 0) - return -EINVAL; - strlcpy(vin->name, "Camera", sizeof(vin->name)); - vin->type = V4L2_INPUT_TYPE_CAMERA; - vin->audioset = 0; - vin->tuner = 0; - vin->std = 0; - vin->status = 0; - return 0; -} - -static int cam_g_input(struct file *file, void *fh, unsigned int *inp) -{ - *inp = 0; - return 0; -} - -static int cam_s_input(struct file *file, void *fh, unsigned int inp) -{ - return (inp > 0) ? -EINVAL : 0; -} - -static int cam_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct w9966 *cam = - container_of(ctrl->handler, struct w9966, hdl); - int ret = 0; - - mutex_lock(&cam->lock); - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - cam->brightness = ctrl->val; - break; - case V4L2_CID_CONTRAST: - cam->contrast = ctrl->val; - break; - case V4L2_CID_SATURATION: - cam->color = ctrl->val; - break; - case V4L2_CID_HUE: - cam->hue = ctrl->val; - break; - default: - ret = -EINVAL; - break; - } - - if (ret == 0) { - w9966_pdev_claim(cam); - - if (w9966_write_reg_i2c(cam, 0x0a, cam->brightness) == -1 || - w9966_write_reg_i2c(cam, 0x0b, cam->contrast) == -1 || - w9966_write_reg_i2c(cam, 0x0c, cam->color) == -1 || - w9966_write_reg_i2c(cam, 0x0d, cam->hue) == -1) { - ret = -EIO; - } - - w9966_pdev_release(cam); - } - mutex_unlock(&cam->lock); - return ret; -} - -static int cam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) -{ - struct w9966 *cam = video_drvdata(file); - struct v4l2_pix_format *pix = &fmt->fmt.pix; - - pix->width = cam->width; - pix->height = cam->height; - pix->pixelformat = V4L2_PIX_FMT_YUYV; - pix->field = V4L2_FIELD_NONE; - pix->bytesperline = 2 * cam->width; - pix->sizeimage = 2 * cam->width * cam->height; - /* Just a guess */ - pix->colorspace = V4L2_COLORSPACE_SMPTE170M; - return 0; -} - -static int cam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) -{ - struct v4l2_pix_format *pix = &fmt->fmt.pix; - - if (pix->width < 2) - pix->width = 2; - if (pix->height < 1) - pix->height = 1; - if (pix->width > W9966_WND_MAX_W) - pix->width = W9966_WND_MAX_W; - if (pix->height > W9966_WND_MAX_H) - pix->height = W9966_WND_MAX_H; - pix->pixelformat = V4L2_PIX_FMT_YUYV; - pix->field = V4L2_FIELD_NONE; - pix->bytesperline = 2 * pix->width; - pix->sizeimage = 2 * pix->width * pix->height; - /* Just a guess */ - pix->colorspace = V4L2_COLORSPACE_SMPTE170M; - return 0; -} - -static int cam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) -{ - struct w9966 *cam = video_drvdata(file); - struct v4l2_pix_format *pix = &fmt->fmt.pix; - int ret = cam_try_fmt_vid_cap(file, fh, fmt); - - if (ret) - return ret; - - mutex_lock(&cam->lock); - /* Update camera regs */ - w9966_pdev_claim(cam); - ret = w9966_setup(cam, 0, 0, 1023, 1023, pix->width, pix->height); - w9966_pdev_release(cam); - mutex_unlock(&cam->lock); - return ret; -} - -static int cam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) -{ - static struct v4l2_fmtdesc formats[] = { - { 0, 0, 0, - "YUV 4:2:2", V4L2_PIX_FMT_YUYV, - { 0, 0, 0, 0 } - }, - }; - enum v4l2_buf_type type = fmt->type; - - if (fmt->index > 0) - return -EINVAL; - - *fmt = formats[fmt->index]; - fmt->type = type; - return 0; -} - -/* Capture data */ -static ssize_t w9966_v4l_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - struct w9966 *cam = video_drvdata(file); - unsigned char addr = 0xa0; /* ECP, read, CCD-transfer, 00000 */ - unsigned char __user *dest = (unsigned char __user *)buf; - unsigned long dleft = count; - unsigned char *tbuf; - - /* Why would anyone want more than this?? */ - if (count > cam->width * cam->height * 2) - return -EINVAL; - - mutex_lock(&cam->lock); - w9966_pdev_claim(cam); - w9966_write_reg(cam, 0x00, 0x02); /* Reset ECP-FIFO buffer */ - w9966_write_reg(cam, 0x00, 0x00); /* Return to normal operation */ - w9966_write_reg(cam, 0x01, 0x98); /* Enable capture */ - - /* write special capture-addr and negotiate into data transfer */ - if ((parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0) || - (parport_write(cam->pport, &addr, 1) != 1) || - (parport_negotiate(cam->pport, cam->ppmode|IEEE1284_DATA) != 0)) { - w9966_pdev_release(cam); - mutex_unlock(&cam->lock); - return -EFAULT; - } - - tbuf = kmalloc(W9966_RBUFFER, GFP_KERNEL); - if (tbuf == NULL) { - count = -ENOMEM; - goto out; - } - - while (dleft > 0) { - unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft; - - if (parport_read(cam->pport, tbuf, tsize) < tsize) { - count = -EFAULT; - goto out; - } - if (copy_to_user(dest, tbuf, tsize) != 0) { - count = -EFAULT; - goto out; - } - dest += tsize; - dleft -= tsize; - } - - w9966_write_reg(cam, 0x01, 0x18); /* Disable capture */ - -out: - kfree(tbuf); - w9966_pdev_release(cam); - mutex_unlock(&cam->lock); - - return count; -} - -static const struct v4l2_file_operations w9966_fops = { - .owner = THIS_MODULE, - .open = v4l2_fh_open, - .release = v4l2_fh_release, - .poll = v4l2_ctrl_poll, - .unlocked_ioctl = video_ioctl2, - .read = w9966_v4l_read, -}; - -static const struct v4l2_ioctl_ops w9966_ioctl_ops = { - .vidioc_querycap = cam_querycap, - .vidioc_g_input = cam_g_input, - .vidioc_s_input = cam_s_input, - .vidioc_enum_input = cam_enum_input, - .vidioc_enum_fmt_vid_cap = cam_enum_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = cam_g_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = cam_s_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = cam_try_fmt_vid_cap, - .vidioc_log_status = v4l2_ctrl_log_status, - .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, - .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -}; - -static const struct v4l2_ctrl_ops cam_ctrl_ops = { - .s_ctrl = cam_s_ctrl, -}; - - -/* Initialize camera device. Setup all internal flags, set a - default video mode, setup ccd-chip, register v4l device etc.. - Also used for 'probing' of hardware. - -1 on error */ -static int w9966_init(struct w9966 *cam, struct parport *port) -{ - struct v4l2_device *v4l2_dev = &cam->v4l2_dev; - - if (cam->dev_state != 0) - return -1; - - strlcpy(v4l2_dev->name, "w9966", sizeof(v4l2_dev->name)); - - if (v4l2_device_register(NULL, v4l2_dev) < 0) { - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return -1; - } - - v4l2_ctrl_handler_init(&cam->hdl, 4); - v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, - V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); - v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, - V4L2_CID_CONTRAST, -64, 64, 1, 64); - v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, - V4L2_CID_SATURATION, -64, 64, 1, 64); - v4l2_ctrl_new_std(&cam->hdl, &cam_ctrl_ops, - V4L2_CID_HUE, -128, 127, 1, 0); - if (cam->hdl.error) { - v4l2_err(v4l2_dev, "couldn't register controls\n"); - return -1; - } - cam->pport = port; - cam->brightness = 128; - cam->contrast = 64; - cam->color = 64; - cam->hue = 0; - - /* Select requested transfer mode */ - switch (parmode) { - default: /* Auto-detect (priority: hw-ecp, hw-epp, sw-ecp) */ - case 0: - if (port->modes & PARPORT_MODE_ECP) - cam->ppmode = IEEE1284_MODE_ECP; - else if (port->modes & PARPORT_MODE_EPP) - cam->ppmode = IEEE1284_MODE_EPP; - else - cam->ppmode = IEEE1284_MODE_ECP; - break; - case 1: /* hw- or sw-ecp */ - cam->ppmode = IEEE1284_MODE_ECP; - break; - case 2: /* hw- or sw-epp */ - cam->ppmode = IEEE1284_MODE_EPP; - break; - } - - /* Tell the parport driver that we exists */ - cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL); - if (cam->pdev == NULL) { - DPRINTF("parport_register_device() failed\n"); - return -1; - } - w9966_set_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV); - - w9966_pdev_claim(cam); - - /* Setup a default capture mode */ - if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) { - DPRINTF("w9966_setup() failed.\n"); - return -1; - } - - w9966_pdev_release(cam); - - /* Fill in the video_device struct and register us to v4l */ - strlcpy(cam->vdev.name, W9966_DRIVERNAME, sizeof(cam->vdev.name)); - cam->vdev.v4l2_dev = v4l2_dev; - cam->vdev.fops = &w9966_fops; - cam->vdev.ioctl_ops = &w9966_ioctl_ops; - cam->vdev.release = video_device_release_empty; - cam->vdev.ctrl_handler = &cam->hdl; - video_set_drvdata(&cam->vdev, cam); - - mutex_init(&cam->lock); - - if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) - return -1; - - w9966_set_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV); - - /* All ok */ - v4l2_info(v4l2_dev, "Found and initialized a webcam on %s.\n", - cam->pport->name); - return 0; -} - - -/* Terminate everything gracefully */ -static void w9966_term(struct w9966 *cam) -{ - /* Unregister from v4l */ - if (w9966_get_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV)) { - video_unregister_device(&cam->vdev); - w9966_set_state(cam, W9966_STATE_VDEV, 0); - } - - v4l2_ctrl_handler_free(&cam->hdl); - - /* Terminate from IEEE1284 mode and release pdev block */ - if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) { - w9966_pdev_claim(cam); - parport_negotiate(cam->pport, IEEE1284_MODE_COMPAT); - w9966_pdev_release(cam); - } - - /* Unregister from parport */ - if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) { - parport_unregister_device(cam->pdev); - w9966_set_state(cam, W9966_STATE_PDEV, 0); - } - memset(cam, 0, sizeof(*cam)); -} - - -/* Called once for every parport on init */ -static void w9966_attach(struct parport *port) -{ - int i; - - for (i = 0; i < W9966_MAXCAMS; i++) { - if (w9966_cams[i].dev_state != 0) /* Cam is already assigned */ - continue; - if (strcmp(pardev[i], "aggressive") == 0 || strcmp(pardev[i], port->name) == 0) { - if (w9966_init(&w9966_cams[i], port) != 0) - w9966_term(&w9966_cams[i]); - break; /* return */ - } - } -} - -/* Called once for every parport on termination */ -static void w9966_detach(struct parport *port) -{ - int i; - - for (i = 0; i < W9966_MAXCAMS; i++) - if (w9966_cams[i].dev_state != 0 && w9966_cams[i].pport == port) - w9966_term(&w9966_cams[i]); -} - - -static struct parport_driver w9966_ppd = { - .name = W9966_DRIVERNAME, - .attach = w9966_attach, - .detach = w9966_detach, -}; - -/* Module entry point */ -static int __init w9966_mod_init(void) -{ - int i; - - for (i = 0; i < W9966_MAXCAMS; i++) - w9966_cams[i].dev_state = 0; - - return parport_register_driver(&w9966_ppd); -} - -/* Module cleanup */ -static void __exit w9966_mod_term(void) -{ - parport_unregister_driver(&w9966_ppd); -} - -module_init(w9966_mod_init); -module_exit(w9966_mod_term); |
