diff options
Diffstat (limited to 'drivers/cdrom/sbpcd.h')
| -rw-r--r-- | drivers/cdrom/sbpcd.h | 839 |
1 files changed, 839 insertions, 0 deletions
diff --git a/drivers/cdrom/sbpcd.h b/drivers/cdrom/sbpcd.h new file mode 100644 index 000000000000..2f2225f13c6f --- /dev/null +++ b/drivers/cdrom/sbpcd.h @@ -0,0 +1,839 @@ +/* + * sbpcd.h Specify interface address and interface type here. + */ + +/* + * Attention! This file contains user-serviceable parts! + * I recommend to make use of it... + * If you feel helpless, look into Documentation/cdrom/sbpcd + * (good idea anyway, at least before mailing me). + * + * The definitions for the first controller can get overridden by + * the kernel command line ("lilo boot option"). + * Examples: + * sbpcd=0x300,LaserMate + * or + * sbpcd=0x230,SoundBlaster + * or + * sbpcd=0x338,SoundScape + * or + * sbpcd=0x2C0,Teac16bit + * + * If sbpcd gets used as a module, you can load it with + * insmod sbpcd.o sbpcd=0x300,0 + * or + * insmod sbpcd.o sbpcd=0x230,1 + * or + * insmod sbpcd.o sbpcd=0x338,2 + * or + * insmod sbpcd.o sbpcd=0x2C0,3 + * respective to override the configured address and type. + */ + +/* + * define your CDROM port base address as CDROM_PORT + * and specify the type of your interface card as SBPRO. + * + * address: + * ======== + * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ... + * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ... + * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to + * specify the REAL address here, not the configuration port address. Look + * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let + * sbpcd auto-probe, if you are not firm with the address. + * There are some soundcards on the market with 0x0630, 0x0650, ...; their + * type is not obvious (both types are possible). + * + * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1. + * if your soundcard has its CDROM port above 0x300, specify + * that address and try SBPRO 0 first. + * if your SoundScape configuration port is at 0x330, specify + * 0x338 and SBPRO 2. + * + * interface type: + * =============== + * set SBPRO to 1 for "true" SoundBlaster card + * set SBPRO to 0 for "compatible" soundcards and + * for "poor" (no sound) interface cards. + * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards + * set SBPRO to 3 for Teac 16bit interface cards + * + * Almost all "compatible" sound boards need to set SBPRO to 0. + * If SBPRO is set wrong, the drives will get found - but any + * data access will give errors (audio access will work). + * The "OmniCD" no-sound interface card from CreativeLabs and most Teac + * interface cards need SBPRO 1. + * + * sound base: + * =========== + * The SOUND_BASE definition tells if we should try to turn the CD sound + * channels on. It will only be of use regarding soundcards with a SbPro + * compatible mixer. + * + * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels + * #define SOUND_BASE 0 leaves the soundcard untouched + */ +#define CDROM_PORT 0x340 /* <-----------<< port address */ +#define SBPRO 0 /* <-----------<< interface type */ +#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */ +#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */ + +/* + * some more or less user dependent definitions - service them! + */ + +/* Set this to 0 once you have configured your interface definitions right. */ +#define DISTRIBUTION 1 + +/* + * Time to wait after giving a message. + * This gets important if you enable non-standard DBG_xxx flags. + * You will see what happens if you omit the pause or make it + * too short. Be warned! + */ +#define KLOGD_PAUSE 1 + +/* tray control: eject tray if no disk is in */ +#if DISTRIBUTION +#define JUKEBOX 0 +#else +#define JUKEBOX 1 +#endif /* DISTRIBUTION */ + +/* tray control: eject tray after last use */ +#if DISTRIBUTION +#define EJECT 0 +#else +#define EJECT 1 +#endif /* DISTRIBUTION */ + +/* max. number of audio frames to read with one */ +/* request (allocates n* 2352 bytes kernel memory!) */ +/* may be freely adjusted, f.e. 75 (= 1 sec.), at */ +/* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */ +#define READ_AUDIO 0 + +/* Optimizations for the Teac CD-55A drive read performance. + * SBP_TEAC_SPEED can be changed here, or one can set the + * variable "teac" when loading as a module. + * Valid settings are: + * 0 - very slow - the recommended "DISTRIBUTION 1" setup. + * 1 - 2x performance with little overhead. No busy waiting. + * 2 - 4x performance with 5ms overhead per read. Busy wait. + * + * Setting SBP_TEAC_SPEED or the variable 'teac' to anything + * other than 0 may cause problems. If you run into them, first + * change SBP_TEAC_SPEED back to 0 and see if your drive responds + * normally. If yes, you are "allowed" to report your case - to help + * me with the driver, not to solve your hassle. Don´t mail if you + * simply are stuck into your own "tuning" experiments, you know? + */ +#define SBP_TEAC_SPEED 1 + +/*==========================================================================*/ +/*==========================================================================*/ +/* + * nothing to change below here if you are not fully aware what you're doing + */ +#ifndef _LINUX_SBPCD_H + +#define _LINUX_SBPCD_H +/*==========================================================================*/ +/*==========================================================================*/ +/* + * driver's own read_ahead, data mode + */ +#define SBP_BUFFER_FRAMES 8 + +#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */ +#undef FUTURE +#undef SAFE_MIXED + +#define TEST_UPC 0 +#define SPEA_TEST 0 +#define TEST_STI 0 +#define OLD_BUSY 0 +#undef PATH_CHECK +#ifndef SOUND_BASE +#define SOUND_BASE 0 +#endif +#if DISTRIBUTION +#undef SBP_TEAC_SPEED +#define SBP_TEAC_SPEED 0 +#endif +/*==========================================================================*/ +/* + * DDI interface definitions + * "invented" by Fred N. van Kempen.. + */ +#define DDIOCSDBG 0x9000 + +/*==========================================================================*/ +/* + * "private" IOCTL functions + */ +#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ + +/*==========================================================================*/ +/* + * Debug output levels + */ +#define DBG_INF 1 /* necessary information */ +#define DBG_BSZ 2 /* BLOCK_SIZE trace */ +#define DBG_REA 3 /* READ status trace */ +#define DBG_CHK 4 /* MEDIA CHECK trace */ +#define DBG_TIM 5 /* datarate timer test */ +#define DBG_INI 6 /* initialization trace */ +#define DBG_TOC 7 /* tell TocEntry values */ +#define DBG_IOC 8 /* ioctl trace */ +#define DBG_STA 9 /* ResponseStatus() trace */ +#define DBG_ERR 10 /* cc_ReadError() trace */ +#define DBG_CMD 11 /* cmd_out() trace */ +#define DBG_WRN 12 /* give explanation before auto-probing */ +#define DBG_MUL 13 /* multi session code test */ +#define DBG_IDX 14 /* test code for drive_id !=0 */ +#define DBG_IOX 15 /* some special information */ +#define DBG_DID 16 /* drive ID test */ +#define DBG_RES 17 /* drive reset info */ +#define DBG_SPI 18 /* SpinUp test */ +#define DBG_IOS 19 /* ioctl trace: subchannel functions */ +#define DBG_IO2 20 /* ioctl trace: general */ +#define DBG_UPC 21 /* show UPC information */ +#define DBG_XA1 22 /* XA mode debugging */ +#define DBG_LCK 23 /* door (un)lock info */ +#define DBG_SQ1 24 /* dump SubQ frame */ +#define DBG_AUD 25 /* READ AUDIO debugging */ +#define DBG_SEQ 26 /* Sequoia interface configuration trace */ +#define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */ +#define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */ +#define DBG_TEA 29 /* TEAC CD-55A debugging trace */ +#define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */ +#define DBG_000 31 /* unnecessary information */ + +/*==========================================================================*/ +/*==========================================================================*/ + +/* + * bits of flags_cmd_out: + */ +#define f_respo3 0x100 +#define f_putcmd 0x80 +#define f_respo2 0x40 +#define f_lopsta 0x20 +#define f_getsta 0x10 +#define f_ResponseStatus 0x08 +#define f_obey_p_check 0x04 +#define f_bit1 0x02 +#define f_wait_if_busy 0x01 + +/* + * diskstate_flags: + */ +#define x80_bit 0x80 +#define upc_bit 0x40 +#define volume_bit 0x20 +#define toc_bit 0x10 +#define multisession_bit 0x08 +#define cd_size_bit 0x04 +#define subq_bit 0x02 +#define frame_size_bit 0x01 + +/* + * disk states (bits of diskstate_flags): + */ +#define upc_valid (current_drive->diskstate_flags&upc_bit) +#define volume_valid (current_drive->diskstate_flags&volume_bit) +#define toc_valid (current_drive->diskstate_flags&toc_bit) +#define cd_size_valid (current_drive->diskstate_flags&cd_size_bit) +#define subq_valid (current_drive->diskstate_flags&subq_bit) +#define frame_size_valid (current_drive->diskstate_flags&frame_size_bit) + +/* + * the status_bits variable + */ +#define p_success 0x100 +#define p_door_closed 0x80 +#define p_caddy_in 0x40 +#define p_spinning 0x20 +#define p_check 0x10 +#define p_busy_new 0x08 +#define p_door_locked 0x04 +#define p_disk_ok 0x01 + +/* + * LCS-7260 special status result bits: + */ +#define p_lcs_door_locked 0x02 +#define p_lcs_door_closed 0x01 /* probably disk_in */ + +/* + * CR-52x special status result bits: + */ +#define p_caddin_old 0x40 +#define p_success_old 0x08 +#define p_busy_old 0x04 +#define p_bit_1 0x02 /* hopefully unused now */ + +/* + * "generation specific" defs of the status result bits: + */ +#define p0_door_closed 0x80 +#define p0_caddy_in 0x40 +#define p0_spinning 0x20 +#define p0_check 0x10 +#define p0_success 0x08 /* unused */ +#define p0_busy 0x04 +#define p0_bit_1 0x02 /* unused */ +#define p0_disk_ok 0x01 + +#define pL_disk_in 0x40 +#define pL_spinning 0x20 +#define pL_check 0x10 +#define pL_success 0x08 /* unused ?? */ +#define pL_busy 0x04 +#define pL_door_locked 0x02 +#define pL_door_closed 0x01 + +#define pV_door_closed 0x40 +#define pV_spinning 0x20 +#define pV_check 0x10 +#define pV_success 0x08 +#define pV_busy 0x04 +#define pV_door_locked 0x02 +#define pV_disk_ok 0x01 + +#define p1_door_closed 0x80 +#define p1_disk_in 0x40 +#define p1_spinning 0x20 +#define p1_check 0x10 +#define p1_busy 0x08 +#define p1_door_locked 0x04 +#define p1_bit_1 0x02 /* unused */ +#define p1_disk_ok 0x01 + +#define p2_disk_ok 0x80 +#define p2_door_locked 0x40 +#define p2_spinning 0x20 +#define p2_busy2 0x10 +#define p2_busy1 0x08 +#define p2_door_closed 0x04 +#define p2_disk_in 0x02 +#define p2_check 0x01 + +/* + * used drive states: + */ +#define st_door_closed (current_drive->status_bits&p_door_closed) +#define st_caddy_in (current_drive->status_bits&p_caddy_in) +#define st_spinning (current_drive->status_bits&p_spinning) +#define st_check (current_drive->status_bits&p_check) +#define st_busy (current_drive->status_bits&p_busy_new) +#define st_door_locked (current_drive->status_bits&p_door_locked) +#define st_diskok (current_drive->status_bits&p_disk_ok) + +/* + * bits of the CDi_status register: + */ +#define s_not_result_ready 0x04 /* 0: "result ready" */ +#define s_not_data_ready 0x02 /* 0: "data ready" */ +#define s_attention 0x01 /* 1: "attention required" */ +/* + * usable as: + */ +#define DRV_ATTN ((inb(CDi_status)&s_attention)!=0) +#define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0) +#define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0) + +/* + * drive families and types (firmware versions): + */ +#define drv_fam0 0x0100 /* CR-52x family */ +#define drv_199 (drv_fam0+0x01) /* <200 */ +#define drv_200 (drv_fam0+0x02) /* <201 */ +#define drv_201 (drv_fam0+0x03) /* <210 */ +#define drv_210 (drv_fam0+0x04) /* <211 */ +#define drv_211 (drv_fam0+0x05) /* <300 */ +#define drv_300 (drv_fam0+0x06) /* >=300 */ + +#define drv_fam1 0x0200 /* CR-56x family */ +#define drv_099 (drv_fam1+0x01) /* <100 */ +#define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */ + +#define drv_fam2 0x0400 /* CD200 family */ + +#define drv_famT 0x0800 /* TEAC CD-55A */ + +#define drv_famL 0x1000 /* Longshine family */ +#define drv_260 (drv_famL+0x01) /* LCS-7260 */ +#define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */ +#define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */ + +#define drv_famV 0x2000 /* ECS-AT (vertos-100) family */ +#define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */ + +#define fam0_drive (current_drive->drv_type&drv_fam0) +#define famL_drive (current_drive->drv_type&drv_famL) +#define famV_drive (current_drive->drv_type&drv_famV) +#define fam1_drive (current_drive->drv_type&drv_fam1) +#define fam2_drive (current_drive->drv_type&drv_fam2) +#define famT_drive (current_drive->drv_type&drv_famT) +#define fam0L_drive (current_drive->drv_type&(drv_fam0|drv_famL)) +#define fam0V_drive (current_drive->drv_type&(drv_fam0|drv_famV)) +#define famLV_drive (current_drive->drv_type&(drv_famL|drv_famV)) +#define fam0LV_drive (current_drive->drv_type&(drv_fam0|drv_famL|drv_famV)) +#define fam1L_drive (current_drive->drv_type&(drv_fam1|drv_famL)) +#define fam1V_drive (current_drive->drv_type&(drv_fam1|drv_famV)) +#define fam1LV_drive (current_drive->drv_type&(drv_fam1|drv_famL|drv_famV)) +#define fam01_drive (current_drive->drv_type&(drv_fam0|drv_fam1)) +#define fam12_drive (current_drive->drv_type&(drv_fam1|drv_fam2)) +#define fam2T_drive (current_drive->drv_type&(drv_fam2|drv_famT)) + +/* + * audio states: + */ +#define audio_completed 3 /* Forgot this one! --AJK */ +#define audio_playing 2 +#define audio_pausing 1 + +/* + * drv_pattern, drv_options: + */ +#define speed_auto 0x80 +#define speed_300 0x40 +#define speed_150 0x20 +#define audio_mono 0x04 + +/* + * values of cmd_type (0 else): + */ +#define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */ +#define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */ +#define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */ +#define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */ + +/* + * sense_byte: + * + * values: 00 + * 01 + * 81 + * 82 "raw audio" mode + * xx from infobuf[0] after 85 00 00 00 00 00 00 + */ + +/* audio status (bin) */ +#define aud_00 0x00 /* Audio status byte not supported or not valid */ +#define audx11 0x0b /* Audio play operation in progress */ +#define audx12 0x0c /* Audio play operation paused */ +#define audx13 0x0d /* Audio play operation successfully completed */ +#define audx14 0x0e /* Audio play operation stopped due to error */ +#define audx15 0x0f /* No current audio status to return */ +/* audio status (bcd) */ +#define aud_11 0x11 /* Audio play operation in progress */ +#define aud_12 0x12 /* Audio play operation paused */ +#define aud_13 0x13 /* Audio play operation successfully completed */ +#define aud_14 0x14 /* Audio play operation stopped due to error */ +#define aud_15 0x15 /* No current audio status to return */ + +/* + * highest allowed drive number (MINOR+1) + */ +#define NR_SBPCD 4 + +/* + * we try to never disable interrupts - seems to work + */ +#define SBPCD_DIS_IRQ 0 + +/* + * "write byte to port" + */ +#define OUT(x,y) outb(y,x) + +/*==========================================================================*/ + +#define MIXER_addr SOUND_BASE+4 /* sound card's address register */ +#define MIXER_data SOUND_BASE+5 /* sound card's data register */ +#define MIXER_CD_Volume 0x28 /* internal SB Pro register address */ + +/*==========================================================================*/ + +#define MAX_TRACKS 99 + +#define ERR_DISKCHANGE 615 + +/*==========================================================================*/ +/* + * To make conversions easier (machine dependent!) + */ +typedef union _msf +{ + u_int n; + u_char c[4]; +} MSF; + +typedef union _blk +{ + u_int n; + u_char c[4]; +} BLK; + +/*==========================================================================*/ + +/*============================================================================ +============================================================================== + +COMMAND SET of "old" drives like CR-521, CR-522 + (the CR-562 family is different): + +No. Command Code +-------------------------------------------- + +Drive Commands: + 1 Seek 01 + 2 Read Data 02 + 3 Read XA-Data 03 + 4 Read Header 04 + 5 Spin Up 05 + 6 Spin Down 06 + 7 Diagnostic 07 + 8 Read UPC 08 + 9 Read ISRC 09 +10 Play Audio 0A +11 Play Audio MSF 0B +12 Play Audio Track/Index 0C + +Status Commands: +13 Read Status 81 +14 Read Error 82 +15 Read Drive Version 83 +16 Mode Select 84 +17 Mode Sense 85 +18 Set XA Parameter 86 +19 Read XA Parameter 87 +20 Read Capacity 88 +21 Read SUB_Q 89 +22 Read Disc Code 8A +23 Read Disc Information 8B +24 Read TOC 8C +25 Pause/Resume 8D +26 Read Packet 8E +27 Read Path Check 00 + + +all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first + +mnemo 7-byte command #bytes response (r0...rn) +________ ____________________ ____ + +Read Status: +status: 81. (1) one-byte command, gives the main + status byte +Read Error: +check1: 82 00 00 00 00 00 00. (6) r1: audio status + +Read Packet: +check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating + to commands 01 04 05 07 08 09 + +Play Audio: +play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba), + nn-nn-nn: #blocks +Play Audio MSF: + 0b mm-ss-ff mm-ss-ff (0) play audio from/to + +Play Audio Track/Index: + 0c ... + +Pause/Resume: +pause: 8d pr 00 00 00 00 00. (0) pause (pr=00) + resume (pr=80) audio playing + +Mode Select: + 84 00 nn-nn ??.?? 00 (0) nn-nn: 2048 or 2340 + possibly defines transfer size + +set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1) + le(vel): min=0, max=FF, else half + (firmware 2.11) + +Mode Sense: +get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting + +Read Disc Information: +tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format) + +Read TOC: +tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn + (fl=0:"lba"-, =2:"msf-bin"-format) + +Read Capacity: +capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity" + + +Read Path Check: +ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55 + ("ping" if the drive is connected) + +Read Drive Version: +ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn" + (n.nn = 2.01, 2.11., 3.00, ...) + +Seek: +seek: 01 00 ll-bb-aa 00 00. (0) +seek: 01 02 mm-ss-ff 00 00. (0) + +Read Data: +read: 02 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2048 bytes, + starting at block xx-xx-xx + fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx + +Read XA-Data: +read: 03 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2340 bytes, + starting at block xx-xx-xx + fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx + +Read SUB_Q: + 89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf, + fl=0: "lba", fl=2: "msf" + +Read Disc Code: + 8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info + +Read Header: + 04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2" + 04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2" + +Spin Up: + 05 00 ll-bb-aa 00 00. (0) possibly implies a "seek" + +Spin Down: + 06 ... + +Diagnostic: + 07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2" + 07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2" + +Read UPC: + 08 00 ll-bb-aa 00 00. (16) + 08 02 mm-ss-ff 00 00. (16) + +Read ISRC: + 09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2" + 09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2" + +Set XA Parameter: + 86 ... + +Read XA Parameter: + 87 ... + +============================================================================== +============================================================================*/ + +/* + * commands + * + * CR-52x: CMD0_ + * CR-56x: CMD1_ + * CD200: CMD2_ + * LCS-7260: CMDL_ + * TEAC CD-55A: CMDT_ + * ECS-AT: CMDV_ + */ +#define CMD1_RESET 0x0a +#define CMD2_RESET 0x01 +#define CMDT_RESET 0xc0 + +#define CMD1_LOCK_CTL 0x0c +#define CMD2_LOCK_CTL 0x1e +#define CMDT_LOCK_CTL CMD2_LOCK_CTL +#define CMDL_LOCK_CTL 0x0e +#define CMDV_LOCK_CTL CMDL_LOCK_CTL + +#define CMD1_TRAY_CTL 0x07 +#define CMD2_TRAY_CTL 0x1b +#define CMDT_TRAY_CTL CMD2_TRAY_CTL +#define CMDL_TRAY_CTL 0x0d +#define CMDV_TRAY_CTL CMDL_TRAY_CTL + +#define CMD1_MULTISESS 0x8d +#define CMDL_MULTISESS 0x8c +#define CMDV_MULTISESS CMDL_MULTISESS + +#define CMD1_SUBCHANINF 0x11 +#define CMD2_SUBCHANINF 0x?? + +#define CMD1_ABORT 0x08 +#define CMD2_ABORT 0x08 +#define CMDT_ABORT 0x08 + +#define CMD2_x02 0x02 + +#define CMD2_SETSPEED 0xda + +#define CMD0_PATH_CHECK 0x00 +#define CMD1_PATH_CHECK 0x??? +#define CMD2_PATH_CHECK 0x??? +#define CMDT_PATH_CHECK 0x??? +#define CMDL_PATH_CHECK CMD0_PATH_CHECK +#define CMDV_PATH_CHECK CMD0_PATH_CHECK + +#define CMD0_SEEK 0x01 +#define CMD1_SEEK CMD0_SEEK +#define CMD2_SEEK 0x2b +#define CMDT_SEEK CMD2_SEEK +#define CMDL_SEEK CMD0_SEEK +#define CMDV_SEEK CMD0_SEEK + +#define CMD0_READ 0x02 +#define CMD1_READ 0x10 +#define CMD2_READ 0x28 +#define CMDT_READ CMD2_READ +#define CMDL_READ CMD0_READ +#define CMDV_READ CMD0_READ + +#define CMD0_READ_XA 0x03 +#define CMD2_READ_XA 0xd4 +#define CMD2_READ_XA2 0xd5 +#define CMDL_READ_XA CMD0_READ_XA /* really ?? */ +#define CMDV_READ_XA CMD0_READ_XA + +#define CMD0_READ_HEAD 0x04 + +#define CMD0_SPINUP 0x05 +#define CMD1_SPINUP 0x02 +#define CMD2_SPINUP CMD2_TRAY_CTL +#define CMDL_SPINUP CMD0_SPINUP +#define CMDV_SPINUP CMD0_SPINUP + +#define CMD0_SPINDOWN 0x06 /* really??? */ +#define CMD1_SPINDOWN 0x06 +#define CMD2_SPINDOWN CMD2_TRAY_CTL +#define CMDL_SPINDOWN 0x0d +#define CMDV_SPINDOWN CMD0_SPINDOWN + +#define CMD0_DIAG 0x07 + +#define CMD0_READ_UPC 0x08 +#define CMD1_READ_UPC 0x88 +#define CMD2_READ_UPC 0x??? +#define CMDL_READ_UPC CMD0_READ_UPC +#define CMDV_READ_UPC 0x8f + +#define CMD0_READ_ISRC 0x09 + +#define CMD0_PLAY 0x0a +#define CMD1_PLAY 0x??? +#define CMD2_PLAY 0x??? +#define CMDL_PLAY CMD0_PLAY +#define CMDV_PLAY CMD0_PLAY + +#define CMD0_PLAY_MSF 0x0b +#define CMD1_PLAY_MSF 0x0e +#define CMD2_PLAY_MSF 0x47 +#define CMDT_PLAY_MSF CMD2_PLAY_MSF +#define CMDL_PLAY_MSF 0x??? + +#define CMD0_PLAY_TI 0x0c +#define CMD1_PLAY_TI 0x0f + +#define CMD0_STATUS 0x81 +#define CMD1_STATUS 0x05 +#define CMD2_STATUS 0x00 +#define CMDT_STATUS CMD2_STATUS +#define CMDL_STATUS CMD0_STATUS +#define CMDV_STATUS CMD0_STATUS +#define CMD2_SEEK_LEADIN 0x00 + +#define CMD0_READ_ERR 0x82 +#define CMD1_READ_ERR CMD0_READ_ERR +#define CMD2_READ_ERR 0x03 +#define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */ +#define CMDL_READ_ERR CMD0_READ_ERR +#define CMDV_READ_ERR CMD0_READ_ERR + +#define CMD0_READ_VER 0x83 +#define CMD1_READ_VER CMD0_READ_VER +#define CMD2_READ_VER 0x12 +#define CMDT_READ_VER CMD2_READ_VER /* really ?? */ +#define CMDL_READ_VER CMD0_READ_VER +#define CMDV_READ_VER CMD0_READ_VER + +#define CMD0_SETMODE 0x84 +#define CMD1_SETMODE 0x09 +#define CMD2_SETMODE 0x55 +#define CMDT_SETMODE CMD2_SETMODE +#define CMDL_SETMODE CMD0_SETMODE + +#define CMD0_GETMODE 0x85 +#define CMD1_GETMODE 0x84 +#define CMD2_GETMODE 0x5a +#define CMDT_GETMODE CMD2_GETMODE +#define CMDL_GETMODE CMD0_GETMODE + +#define CMD0_SET_XA 0x86 + +#define CMD0_GET_XA 0x87 + +#define CMD0_CAPACITY 0x88 +#define CMD1_CAPACITY 0x85 +#define CMD2_CAPACITY 0x25 +#define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */ + +#define CMD0_READSUBQ 0x89 +#define CMD1_READSUBQ 0x87 +#define CMD2_READSUBQ 0x42 +#define CMDT_READSUBQ CMD2_READSUBQ +#define CMDL_READSUBQ CMD0_READSUBQ +#define CMDV_READSUBQ CMD0_READSUBQ + +#define CMD0_DISKCODE 0x8a + +#define CMD0_DISKINFO 0x8b +#define CMD1_DISKINFO CMD0_DISKINFO +#define CMD2_DISKINFO 0x43 +#define CMDT_DISKINFO CMD2_DISKINFO +#define CMDL_DISKINFO CMD0_DISKINFO +#define CMDV_DISKINFO CMD0_DISKINFO + +#define CMD0_READTOC 0x8c +#define CMD1_READTOC CMD0_READTOC +#define CMD2_READTOC 0x??? +#define CMDL_READTOC CMD0_READTOC +#define CMDV_READTOC CMD0_READTOC + +#define CMD0_PAU_RES 0x8d +#define CMD1_PAU_RES 0x0d +#define CMD2_PAU_RES 0x4b +#define CMDT_PAUSE CMD2_PAU_RES +#define CMDL_PAU_RES CMD0_PAU_RES +#define CMDV_PAUSE CMD0_PAU_RES + +#define CMD0_PACKET 0x8e +#define CMD1_PACKET CMD0_PACKET +#define CMD2_PACKET 0x??? +#define CMDL_PACKET CMD0_PACKET +#define CMDV_PACKET 0x??? + +/*==========================================================================*/ +/*==========================================================================*/ +#endif /* _LINUX_SBPCD_H */ +/*==========================================================================*/ +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-indent-level: 8 + * c-brace-imaginary-offset: 0 + * c-brace-offset: -8 + * c-argdecl-indent: 8 + * c-label-offset: -8 + * c-continued-statement-offset: 8 + * c-continued-brace-offset: 0 + * End: + */ |
