diff options
Diffstat (limited to 'drivers/ata/libata-sff.c')
| -rw-r--r-- | drivers/ata/libata-sff.c | 97 |
1 files changed, 93 insertions, 4 deletions
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 714cb046b594..8332e97a9de3 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -52,6 +52,7 @@ const struct ata_port_operations ata_sff_port_ops = { .softreset = ata_sff_softreset, .hardreset = sata_sff_hardreset, .postreset = ata_sff_postreset, + .drain_fifo = ata_sff_drain_fifo, .error_handler = ata_sff_error_handler, .post_internal_cmd = ata_sff_post_internal_cmd, @@ -64,6 +65,8 @@ const struct ata_port_operations ata_sff_port_ops = { .sff_irq_on = ata_sff_irq_on, .sff_irq_clear = ata_sff_irq_clear, + .lost_interrupt = ata_sff_lost_interrupt, + .port_start = ata_sff_port_start, }; EXPORT_SYMBOL_GPL(ata_sff_port_ops); @@ -1646,7 +1649,7 @@ EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf); * RETURNS: * One if interrupt was handled, zero if not (shared irq). */ -inline unsigned int ata_sff_host_intr(struct ata_port *ap, +unsigned int ata_sff_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) { struct ata_eh_info *ehi = &ap->link.eh_info; @@ -1775,6 +1778,48 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) EXPORT_SYMBOL_GPL(ata_sff_interrupt); /** + * ata_sff_lost_interrupt - Check for an apparent lost interrupt + * @ap: port that appears to have timed out + * + * Called from the libata error handlers when the core code suspects + * an interrupt has been lost. If it has complete anything we can and + * then return. Interface must support altstatus for this faster + * recovery to occur. + * + * Locking: + * Caller holds host lock + */ + +void ata_sff_lost_interrupt(struct ata_port *ap) +{ + u8 status; + struct ata_queued_cmd *qc; + + /* Only one outstanding command per SFF channel */ + qc = ata_qc_from_tag(ap, ap->link.active_tag); + /* Check we have a live one.. */ + if (qc == NULL || !(qc->flags & ATA_QCFLAG_ACTIVE)) + return; + /* We cannot lose an interrupt on a polled command */ + if (qc->tf.flags & ATA_TFLAG_POLLING) + return; + /* See if the controller thinks it is still busy - if so the command + isn't a lost IRQ but is still in progress */ + status = ata_sff_altstatus(ap); + if (status & ATA_BUSY) + return; + + /* There was a command running, we are no longer busy and we have + no interrupt. */ + ata_port_printk(ap, KERN_WARNING, "lost interrupt (Status 0x%x)\n", + status); + /* Run the host interrupt logic as if the interrupt had not been + lost */ + ata_sff_host_intr(ap, qc); +} +EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt); + +/** * ata_sff_freeze - Freeze SFF controller port * @ap: port to freeze * @@ -2066,6 +2111,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr); udelay(20); /* FIXME: flush */ iowrite8(ap->ctl, ioaddr->ctl_addr); + ap->last_ctl = ap->ctl; /* wait the port to become ready */ return ata_sff_wait_after_reset(&ap->link, devmask, deadline); @@ -2190,12 +2236,47 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes) } /* set up device control */ - if (ap->ioaddr.ctl_addr) + if (ap->ioaddr.ctl_addr) { iowrite8(ap->ctl, ap->ioaddr.ctl_addr); + ap->last_ctl = ap->ctl; + } } EXPORT_SYMBOL_GPL(ata_sff_postreset); /** + * ata_sff_drain_fifo - Stock FIFO drain logic for SFF controllers + * @qc: command + * + * Drain the FIFO and device of any stuck data following a command + * failing to complete. In some cases this is neccessary before a + * reset will recover the device. + * + */ + +void ata_sff_drain_fifo(struct ata_queued_cmd *qc) +{ + int count; + struct ata_port *ap; + + /* We only need to flush incoming data when a command was running */ + if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) + return; + + ap = qc->ap; + /* Drain up to 64K of data before we give up this recovery method */ + for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) + && count < 32768; count++) + ioread16(ap->ioaddr.data_addr); + + /* Can become DEBUG later */ + if (count) + ata_port_printk(ap, KERN_DEBUG, + "drained %d bytes to clear DRQ.\n", count); + +} +EXPORT_SYMBOL_GPL(ata_sff_drain_fifo); + +/** * ata_sff_error_handler - Stock error handler for BMDMA controller * @ap: port to handle error for * @@ -2236,7 +2317,8 @@ void ata_sff_error_handler(struct ata_port *ap) * really a timeout event, adjust error mask and * cancel frozen state. */ - if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) { + if (qc->err_mask == AC_ERR_TIMEOUT + && (host_stat & ATA_DMA_ERR)) { qc->err_mask = AC_ERR_HOST_BUS; thaw = 1; } @@ -2247,6 +2329,13 @@ void ata_sff_error_handler(struct ata_port *ap) ata_sff_sync(ap); /* FIXME: We don't need this */ ap->ops->sff_check_status(ap); ap->ops->sff_irq_clear(ap); + /* We *MUST* do FIFO draining before we issue a reset as several + * devices helpfully clear their internal state and will lock solid + * if we touch the data port post reset. Pass qc in case anyone wants + * to do different PIO/DMA recovery or has per command fixups + */ + if (ap->ops->drain_fifo) + ap->ops->drain_fifo(qc); spin_unlock_irqrestore(ap->lock, flags); @@ -2534,6 +2623,7 @@ void ata_bus_reset(struct ata_port *ap) if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { /* set up device control for ATA_FLAG_SATA_RESET */ iowrite8(ap->ctl, ioaddr->ctl_addr); + ap->last_ctl = ap->ctl; } DPRINTK("EXIT\n"); @@ -2955,4 +3045,3 @@ out: EXPORT_SYMBOL_GPL(ata_pci_sff_init_one); #endif /* CONFIG_PCI */ - |
