1 files changed, 104 insertions, 142 deletions

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 3270d3c8ba4e..aebcf6355df4 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1,5 +1,5 @@
 /*
- *  video.c - ACPI Video Driver ($Revision:$)
+ *  video.c - ACPI Video Driver
  *
  *  Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
  *  Copyright (C) 2004 Bruno Ducrot <ducrot@poupinou.org>
@@ -88,7 +88,7 @@ module_param(allow_duplicates, bool, 0644);
 static bool use_bios_initial_backlight = 1;
 module_param(use_bios_initial_backlight, bool, 0644);
 
-static int register_count = 0;
+static int register_count;
 static int acpi_video_bus_add(struct acpi_device *device);
 static int acpi_video_bus_remove(struct acpi_device *device);
 static void acpi_video_bus_notify(struct acpi_device *device, u32 event);
@@ -118,26 +118,26 @@ struct acpi_video_bus_flags {
 };
 
 struct acpi_video_bus_cap {
-	u8 _DOS:1;		/*Enable/Disable output switching */
-	u8 _DOD:1;		/*Enumerate all devices attached to display adapter */
-	u8 _ROM:1;		/*Get ROM Data */
-	u8 _GPD:1;		/*Get POST Device */
-	u8 _SPD:1;		/*Set POST Device */
-	u8 _VPO:1;		/*Video POST Options */
+	u8 _DOS:1;		/* Enable/Disable output switching */
+	u8 _DOD:1;		/* Enumerate all devices attached to display adapter */
+	u8 _ROM:1;		/* Get ROM Data */
+	u8 _GPD:1;		/* Get POST Device */
+	u8 _SPD:1;		/* Set POST Device */
+	u8 _VPO:1;		/* Video POST Options */
 	u8 reserved:2;
 };
 
 struct acpi_video_device_attrib {
 	u32 display_index:4;	/* A zero-based instance of the Display */
-	u32 display_port_attachment:4;	/*This field differentiates the display type */
-	u32 display_type:4;	/*Describe the specific type in use */
-	u32 vendor_specific:4;	/*Chipset Vendor Specific */
-	u32 bios_can_detect:1;	/*BIOS can detect the device */
-	u32 depend_on_vga:1;	/*Non-VGA output device whose power is related to 
+	u32 display_port_attachment:4;	/* This field differentiates the display type */
+	u32 display_type:4;	/* Describe the specific type in use */
+	u32 vendor_specific:4;	/* Chipset Vendor Specific */
+	u32 bios_can_detect:1;	/* BIOS can detect the device */
+	u32 depend_on_vga:1;	/* Non-VGA output device whose power is related to
 				   the VGA device. */
-	u32 pipe_id:3;		/*For VGA multiple-head devices. */
-	u32 reserved:10;	/*Must be 0 */
-	u32 device_id_scheme:1;	/*Device ID Scheme */
+	u32 pipe_id:3;		/* For VGA multiple-head devices. */
+	u32 reserved:10;	/* Must be 0 */
+	u32 device_id_scheme:1;	/* Device ID Scheme */
 };
 
 struct acpi_video_enumerated_device {
@@ -174,19 +174,17 @@ struct acpi_video_device_flags {
 };
 
 struct acpi_video_device_cap {
-	u8 _ADR:1;		/*Return the unique ID */
-	u8 _BCL:1;		/*Query list of brightness control levels supported */
-	u8 _BCM:1;		/*Set the brightness level */
+	u8 _ADR:1;		/* Return the unique ID */
+	u8 _BCL:1;		/* Query list of brightness control levels supported */
+	u8 _BCM:1;		/* Set the brightness level */
 	u8 _BQC:1;		/* Get current brightness level */
 	u8 _BCQ:1;		/* Some buggy BIOS uses _BCQ instead of _BQC */
-	u8 _DDC:1;		/*Return the EDID for this device */
+	u8 _DDC:1;		/* Return the EDID for this device */
 };
 
 struct acpi_video_brightness_flags {
 	u8 _BCL_no_ac_battery_levels:1;	/* no AC/Battery levels in _BCL */
-	u8 _BCL_reversed:1;		/* _BCL package is in a reversed order*/
-	u8 _BCL_use_index:1;		/* levels in _BCL are index values */
-	u8 _BCM_use_index:1;		/* input of _BCM is an index value */
+	u8 _BCL_reversed:1;		/* _BCL package is in a reversed order */
 	u8 _BQC_use_index:1;		/* _BQC returns an index value */
 };
 
@@ -231,21 +229,22 @@ static int acpi_video_get_next_level(struct acpi_video_device *device,
 static int acpi_video_switch_brightness(struct acpi_video_device *device,
 					 int event);
 
-/*backlight device sysfs support*/
+/* backlight device sysfs support */
 static int acpi_video_get_brightness(struct backlight_device *bd)
 {
 	unsigned long long cur_level;
 	int i;
-	struct acpi_video_device *vd =
-		(struct acpi_video_device *)bl_get_data(bd);
+	struct acpi_video_device *vd = bl_get_data(bd);
 
 	if (acpi_video_device_lcd_get_level_current(vd, &cur_level, false))
 		return -EINVAL;
 	for (i = 2; i < vd->brightness->count; i++) {
 		if (vd->brightness->levels[i] == cur_level)
-			/* The first two entries are special - see page 575
-			   of the ACPI spec 3.0 */
-			return i-2;
+			/*
+			 * The first two entries are special - see page 575
+			 * of the ACPI spec 3.0
+			 */
+			return i - 2;
 	}
 	return 0;
 }
@@ -253,8 +252,7 @@ static int acpi_video_get_brightness(struct backlight_device *bd)
 static int acpi_video_set_brightness(struct backlight_device *bd)
 {
 	int request_level = bd->props.brightness + 2;
-	struct acpi_video_device *vd =
-		(struct acpi_video_device *)bl_get_data(bd);
+	struct acpi_video_device *vd = bl_get_data(bd);
 
 	return acpi_video_device_lcd_set_level(vd,
 				vd->brightness->levels[request_level]);
@@ -302,11 +300,11 @@ video_set_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long st
 	struct acpi_video_device *video = acpi_driver_data(device);
 	int level;
 
-	if ( state >= video->brightness->count - 2)
+	if (state >= video->brightness->count - 2)
 		return -EINVAL;
 
 	state = video->brightness->count - state;
-	level = video->brightness->levels[state -1];
+	level = video->brightness->levels[state - 1];
 	return acpi_video_device_lcd_set_level(video, level);
 }
 
@@ -316,9 +314,11 @@ static const struct thermal_cooling_device_ops video_cooling_ops = {
 	.set_cur_state = video_set_cur_state,
 };
 
-/* --------------------------------------------------------------------------
-                               Video Management
-   -------------------------------------------------------------------------- */
+/*
+ * --------------------------------------------------------------------------
+ *                             Video Management
+ * --------------------------------------------------------------------------
+ */
 
 static int
 acpi_video_device_lcd_query_levels(struct acpi_video_device *device,
@@ -345,7 +345,7 @@ acpi_video_device_lcd_query_levels(struct acpi_video_device *device,
 
 	return 0;
 
-      err:
+err:
 	kfree(buffer.pointer);
 
 	return status;
@@ -355,14 +355,10 @@ static int
 acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
 {
 	int status;
-	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
-	struct acpi_object_list args = { 1, &arg0 };
 	int state;
 
-	arg0.integer.value = level;
-
-	status = acpi_evaluate_object(device->dev->handle, "_BCM",
-				      &args, NULL);
+	status = acpi_execute_simple_method(device->dev->handle,
+					    "_BCM", level);
 	if (ACPI_FAILURE(status)) {
 		ACPI_ERROR((AE_INFO, "Evaluating _BCM failed"));
 		return -EIO;
@@ -546,7 +542,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 				if (device->brightness->levels[i] == *level) {
 					device->brightness->curr = *level;
 					return 0;
-			}
+				}
 			/*
 			 * BQC returned an invalid level.
 			 * Stop using it.
@@ -556,7 +552,8 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 				      buf));
 			device->cap._BQC = device->cap._BCQ = 0;
 		} else {
-			/* Fixme:
+			/*
+			 * Fixme:
 			 * should we return an error or ignore this failure?
 			 * dev->brightness->curr is a cached value which stores
 			 * the correct current backlight level in most cases.
@@ -615,8 +612,8 @@ acpi_video_device_EDID(struct acpi_video_device *device,
 
 /*
  *  Arg:
- *  	video		: video bus device pointer
- *	bios_flag	: 
+ *	video		: video bus device pointer
+ *	bios_flag	:
  *		0.	The system BIOS should NOT automatically switch(toggle)
  *			the active display output.
  *		1.	The system BIOS should automatically switch (toggle) the
@@ -628,9 +625,9 @@ acpi_video_device_EDID(struct acpi_video_device *device,
  *	lcd_flag	:
  *		0.	The system BIOS should automatically control the brightness level
  *			of the LCD when the power changes from AC to DC
- *		1. 	The system BIOS should NOT automatically control the brightness 
+ *		1.	The system BIOS should NOT automatically control the brightness
  *			level of the LCD when the power changes from AC to DC.
- * Return Value:
+ *  Return Value:
  *		-EINVAL	wrong arg.
  */
 
@@ -638,18 +635,15 @@ static int
 acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag)
 {
 	acpi_status status;
-	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
-	struct acpi_object_list args = { 1, &arg0 };
 
 	if (!video->cap._DOS)
 		return 0;
 
 	if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1)
 		return -EINVAL;
-	arg0.integer.value = (lcd_flag << 2) | bios_flag;
-	video->dos_setting = arg0.integer.value;
-	status = acpi_evaluate_object(video->device->handle, "_DOS",
-		&args, NULL);
+	video->dos_setting = (lcd_flag << 2) | bios_flag;
+	status = acpi_execute_simple_method(video->device->handle, "_DOS",
+					    (lcd_flag << 2) | bios_flag);
 	if (ACPI_FAILURE(status))
 		return -EIO;
 
@@ -717,8 +711,8 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device,
 
 
 /*
- *  Arg:	
- *  	device	: video output device (LCD, CRT, ..)
+ *  Arg:
+ *	device	: video output device (LCD, CRT, ..)
  *
  *  Return Value:
  *	Maximum brightness level
@@ -806,16 +800,6 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	br->count = count;
 	device->brightness = br;
 
-	/* Check the input/output of _BQC/_BCL/_BCM */
-	if ((max_level < 100) && (max_level <= (count - 2)))
-		br->flags._BCL_use_index = 1;
-
-	/*
-	 * _BCM is always consistent with _BCL,
-	 * at least for all the laptops we have ever seen.
-	 */
-	br->flags._BCM_use_index = br->flags._BCL_use_index;
-
 	/* _BQC uses INDEX while _BCL uses VALUE in some laptops */
 	br->curr = level = max_level;
 
@@ -877,7 +861,7 @@ out:
  *	device	: video output device (LCD, CRT, ..)
  *
  *  Return Value:
- *  	None
+ *	None
  *
  *  Find out all required AML methods defined under the output
  *  device.
@@ -885,28 +869,21 @@ out:
 
 static void acpi_video_device_find_cap(struct acpi_video_device *device)
 {
-	acpi_handle h_dummy1;
-
-	if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_ADR", &h_dummy1))) {
+	if (acpi_has_method(device->dev->handle, "_ADR"))
 		device->cap._ADR = 1;
-	}
-	if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BCL", &h_dummy1))) {
+	if (acpi_has_method(device->dev->handle, "_BCL"))
 		device->cap._BCL = 1;
-	}
-	if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BCM", &h_dummy1))) {
+	if (acpi_has_method(device->dev->handle, "_BCM"))
 		device->cap._BCM = 1;
-	}
-	if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle,"_BQC",&h_dummy1)))
+	if (acpi_has_method(device->dev->handle, "_BQC")) {
 		device->cap._BQC = 1;
-	else if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BCQ",
-				&h_dummy1))) {
+	} else if (acpi_has_method(device->dev->handle, "_BCQ")) {
 		printk(KERN_WARNING FW_BUG "_BCQ is used instead of _BQC\n");
 		device->cap._BCQ = 1;
 	}
 
-	if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DDC", &h_dummy1))) {
+	if (acpi_has_method(device->dev->handle, "_DDC"))
 		device->cap._DDC = 1;
-	}
 
 	if (acpi_video_backlight_support()) {
 		struct backlight_properties props;
@@ -914,7 +891,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 		acpi_handle acpi_parent;
 		struct device *parent = NULL;
 		int result;
-		static int count = 0;
+		static int count;
 		char *name;
 
 		result = acpi_video_init_brightness(device);
@@ -983,37 +960,29 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 }
 
 /*
- *  Arg:	
- *  	device	: video output device (VGA)
+ *  Arg:
+ *	device	: video output device (VGA)
  *
  *  Return Value:
- *  	None
+ *	None
  *
  *  Find out all required AML methods defined under the video bus device.
  */
 
 static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
 {
-	acpi_handle h_dummy1;
-
-	if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOS", &h_dummy1))) {
+	if (acpi_has_method(video->device->handle, "_DOS"))
 		video->cap._DOS = 1;
-	}
-	if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOD", &h_dummy1))) {
+	if (acpi_has_method(video->device->handle, "_DOD"))
 		video->cap._DOD = 1;
-	}
-	if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_ROM", &h_dummy1))) {
+	if (acpi_has_method(video->device->handle, "_ROM"))
 		video->cap._ROM = 1;
-	}
-	if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_GPD", &h_dummy1))) {
+	if (acpi_has_method(video->device->handle, "_GPD"))
 		video->cap._GPD = 1;
-	}
-	if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_SPD", &h_dummy1))) {
+	if (acpi_has_method(video->device->handle, "_SPD"))
 		video->cap._SPD = 1;
-	}
-	if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_VPO", &h_dummy1))) {
+	if (acpi_has_method(video->device->handle, "_VPO"))
 		video->cap._VPO = 1;
-	}
 }
 
 /*
@@ -1034,7 +1003,8 @@ static int acpi_video_bus_check(struct acpi_video_bus *video)
 		return -ENODEV;
 	pci_dev_put(dev);
 
-	/* Since there is no HID, CID and so on for VGA driver, we have
+	/*
+	 * Since there is no HID, CID and so on for VGA driver, we have
 	 * to check well known required nodes.
 	 */
 
@@ -1064,12 +1034,14 @@ static int acpi_video_bus_check(struct acpi_video_bus *video)
 	return status;
 }
 
-/* --------------------------------------------------------------------------
-                                 Driver Interface
-   -------------------------------------------------------------------------- */
+/*
+ * --------------------------------------------------------------------------
+ *                               Driver Interface
+ * --------------------------------------------------------------------------
+ */
 
 /* device interface */
-static struct acpi_video_device_attrib*
+static struct acpi_video_device_attrib *
 acpi_video_get_device_attr(struct acpi_video_bus *video, unsigned long device_id)
 {
 	struct acpi_video_enumerated_device *ids;
@@ -1107,7 +1079,7 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
 	unsigned long long device_id;
 	int status, device_type;
 	struct acpi_video_device *data;
-	struct acpi_video_device_attrib* attribute;
+	struct acpi_video_device_attrib *attribute;
 
 	status =
 	    acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
@@ -1129,7 +1101,7 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
 
 	attribute = acpi_video_get_device_attr(video, device_id);
 
-	if((attribute != NULL) && attribute->device_id_scheme) {
+	if (attribute && attribute->device_id_scheme) {
 		switch (attribute->display_type) {
 		case ACPI_VIDEO_DISPLAY_CRT:
 			data->flags.crt = 1;
@@ -1147,24 +1119,24 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
 			data->flags.unknown = 1;
 			break;
 		}
-		if(attribute->bios_can_detect)
+		if (attribute->bios_can_detect)
 			data->flags.bios = 1;
 	} else {
 		/* Check for legacy IDs */
 		device_type = acpi_video_get_device_type(video, device_id);
 		/* Ignore bits 16 and 18-20 */
 		switch (device_type & 0xffe2ffff) {
-			case ACPI_VIDEO_DISPLAY_LEGACY_MONITOR:
-				data->flags.crt = 1;
-				break;
-			case ACPI_VIDEO_DISPLAY_LEGACY_PANEL:
-				data->flags.lcd = 1;
-				break;
-			case ACPI_VIDEO_DISPLAY_LEGACY_TV:
-				data->flags.tvout = 1;
-				break;
-			default:
-				data->flags.unknown = 1;
+		case ACPI_VIDEO_DISPLAY_LEGACY_MONITOR:
+			data->flags.crt = 1;
+			break;
+		case ACPI_VIDEO_DISPLAY_LEGACY_PANEL:
+			data->flags.lcd = 1;
+			break;
+		case ACPI_VIDEO_DISPLAY_LEGACY_TV:
+			data->flags.tvout = 1;
+			break;
+		default:
+			data->flags.unknown = 1;
 		}
 	}
 
@@ -1187,12 +1159,12 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
 
 /*
  *  Arg:
- *  	video	: video bus device 
+ *	video	: video bus device
  *
  *  Return:
- *  	none
- *  
- *  Enumerate the video device list of the video bus, 
+ *	none
+ *
+ *  Enumerate the video device list of the video bus,
  *  bind the ids with the corresponding video devices
  *  under the video bus.
  */
@@ -1211,13 +1183,13 @@ static void acpi_video_device_rebind(struct acpi_video_bus *video)
 
 /*
  *  Arg:
- *  	video	: video bus device 
- *  	device	: video output device under the video 
- *  		bus
+ *	video	: video bus device
+ *	device	: video output device under the video
+ *		bus
  *
  *  Return:
- *  	none
- *  
+ *	none
+ *
  *  Bind the ids with the corresponding video devices
  *  under the video bus.
  */
@@ -1240,11 +1212,11 @@ acpi_video_device_bind(struct acpi_video_bus *video,
 
 /*
  *  Arg:
- *  	video	: video bus device 
+ *	video	: video bus device
  *
  *  Return:
- *  	< 0	: error
- *  
+ *	< 0	: error
+ *
  *  Call _DOD to enumerate all devices attached to display adapter
  *
  */
@@ -1305,7 +1277,7 @@ static int acpi_video_device_enumerate(struct acpi_video_bus *video)
 	video->attached_array = active_list;
 	video->attached_count = count;
 
- out:
+out:
 	kfree(buffer.pointer);
 	return status;
 }
@@ -1572,7 +1544,6 @@ static void acpi_video_bus_notify(struct acpi_device *device, u32 event)
 	switch (event) {
 	case ACPI_VIDEO_NOTIFY_SWITCH:	/* User requested a switch,
 					 * most likely via hotkey. */
-		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_SWITCHVIDEOMODE;
 		break;
 
@@ -1580,20 +1551,16 @@ static void acpi_video_bus_notify(struct acpi_device *device, u32 event)
 					 * connector. */
 		acpi_video_device_enumerate(video);
 		acpi_video_device_rebind(video);
-		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_SWITCHVIDEOMODE;
 		break;
 
 	case ACPI_VIDEO_NOTIFY_CYCLE:	/* Cycle Display output hotkey pressed. */
-		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_SWITCHVIDEOMODE;
 		break;
 	case ACPI_VIDEO_NOTIFY_NEXT_OUTPUT:	/* Next Display output hotkey pressed. */
-		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_VIDEO_NEXT;
 		break;
 	case ACPI_VIDEO_NOTIFY_PREV_OUTPUT:	/* previous Display output hotkey pressed. */
-		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_VIDEO_PREV;
 		break;
 
@@ -1636,31 +1603,26 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
 	case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS:	/* Cycle brightness */
 		if (brightness_switch_enabled)
 			acpi_video_switch_brightness(video_device, event);
-		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_BRIGHTNESS_CYCLE;
 		break;
 	case ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS:	/* Increase brightness */
 		if (brightness_switch_enabled)
 			acpi_video_switch_brightness(video_device, event);
-		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_BRIGHTNESSUP;
 		break;
 	case ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS:	/* Decrease brightness */
 		if (brightness_switch_enabled)
 			acpi_video_switch_brightness(video_device, event);
-		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_BRIGHTNESSDOWN;
 		break;
 	case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS:	/* zero brightness */
 		if (brightness_switch_enabled)
 			acpi_video_switch_brightness(video_device, event);
-		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_BRIGHTNESS_ZERO;
 		break;
 	case ACPI_VIDEO_NOTIFY_DISPLAY_OFF:	/* display device off */
 		if (brightness_switch_enabled)
 			acpi_video_switch_brightness(video_device, event);
-		acpi_bus_generate_proc_event(device, event, 0);
 		keycode = KEY_DISPLAY_OFF;
 		break;
 	default:
@@ -1760,7 +1722,7 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	if (!strcmp(device->pnp.bus_id, "VID")) {
 		if (instance)
 			device->pnp.bus_id[3] = '0' + instance;
-		instance ++;
+		instance++;
 	}
 	/* a hack to fix the duplicate name "VGA" problem on Pa 3553 */
 	if (!strcmp(device->pnp.bus_id, "VGA")) {