9 files changed, 7 insertions, 530 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 532d2e090e6f..7d1569947204 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -49,7 +49,6 @@ obj-y				+= cpu/
 obj-y				+= acpi/
 obj-y				+= reboot.o
 obj-$(CONFIG_X86_32)		+= reboot_32.o
-obj-$(CONFIG_MCA)		+= mca_32.o
 obj-$(CONFIG_X86_MSR)		+= msr.o
 obj-$(CONFIG_X86_CPUID)		+= cpuid.o
 obj-$(CONFIG_PCI)		+= early-quirks.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index a415b1f44365..f564b189de1a 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -990,7 +990,7 @@ void __init mp_config_acpi_legacy_irqs(void)
 	int i;
 	struct mpc_intsrc mp_irq;
 
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+#ifdef CONFIG_EISA
 	/*
 	 * Fabricate the legacy ISA bus (bus #31).
 	 */
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e88300d8e80a..675e9045a3c5 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -142,7 +142,7 @@ int mp_irq_entries;
 /* GSI interrupts */
 static int nr_irqs_gsi = NR_IRQS_LEGACY;
 
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+#ifdef CONFIG_EISA
 int mp_bus_id_to_type[MAX_MP_BUSSES];
 #endif
 
@@ -875,7 +875,7 @@ static int __init find_isa_irq_apic(int irq, int type)
 	return -1;
 }
 
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
 /*
  * EISA Edge/Level control register, ELCR
  */
@@ -912,12 +912,6 @@ static int EISA_ELCR(unsigned int irq)
 #define default_PCI_trigger(idx)	(1)
 #define default_PCI_polarity(idx)	(1)
 
-/* MCA interrupts are always polarity zero level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_MCA_trigger(idx)	(1)
-#define default_MCA_polarity(idx)	default_ISA_polarity(idx)
-
 static int irq_polarity(int idx)
 {
 	int bus = mp_irqs[idx].srcbus;
@@ -975,7 +969,7 @@ static int irq_trigger(int idx)
 				trigger = default_ISA_trigger(idx);
 			else
 				trigger = default_PCI_trigger(idx);
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
 			switch (mp_bus_id_to_type[bus]) {
 				case MP_BUS_ISA: /* ISA pin */
 				{
@@ -992,11 +986,6 @@ static int irq_trigger(int idx)
 					/* set before the switch */
 					break;
 				}
-				case MP_BUS_MCA: /* MCA pin */
-				{
-					trigger = default_MCA_trigger(idx);
-					break;
-				}
 				default:
 				{
 					printk(KERN_WARNING "broken BIOS!!\n");
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c
deleted file mode 100644
index 7eb1e2b97827..000000000000
--- a/arch/x86/kernel/mca_32.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- *  Written by Martin Kolinek, February 1996
- *
- * Changes:
- *
- *	Chris Beauregard July 28th, 1996
- *	- Fixed up integrated SCSI detection
- *
- *	Chris Beauregard August 3rd, 1996
- *	- Made mca_info local
- *	- Made integrated registers accessible through standard function calls
- *	- Added name field
- *	- More sanity checking
- *
- *	Chris Beauregard August 9th, 1996
- *	- Rewrote /proc/mca
- *
- *	Chris Beauregard January 7th, 1997
- *	- Added basic NMI-processing
- *	- Added more information to mca_info structure
- *
- *	David Weinehall October 12th, 1998
- *	- Made a lot of cleaning up in the source
- *	- Added use of save_flags / restore_flags
- *	- Added the 'driver_loaded' flag in MCA_adapter
- *	- Added an alternative implemention of ZP Gu's mca_find_unused_adapter
- *
- *	David Weinehall March 24th, 1999
- *	- Fixed the output of 'Driver Installed' in /proc/mca/pos
- *	- Made the Integrated Video & SCSI show up even if they have id 0000
- *
- *	Alexander Viro November 9th, 1999
- *	- Switched to regular procfs methods
- *
- *	Alfred Arnold & David Weinehall August 23rd, 2000
- *	- Added support for Planar POS-registers
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/mca.h>
-#include <linux/kprobes.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-#include <linux/proc_fs.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <linux/init.h>
-
-static unsigned char which_scsi;
-
-int MCA_bus;
-EXPORT_SYMBOL(MCA_bus);
-
-/*
- * Motherboard register spinlock. Untested on SMP at the moment, but
- * are there any MCA SMP boxes?
- *
- * Yes - Alan
- */
-static DEFINE_SPINLOCK(mca_lock);
-
-/* Build the status info for the adapter */
-
-static void mca_configure_adapter_status(struct mca_device *mca_dev)
-{
-	mca_dev->status = MCA_ADAPTER_NONE;
-
-	mca_dev->pos_id = mca_dev->pos[0]
-		+ (mca_dev->pos[1] << 8);
-
-	if (!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
-
-		/*
-		 * id = 0x0000 usually indicates hardware failure,
-		 * however, ZP Gu (zpg@castle.net> reports that his 9556
-		 * has 0x0000 as id and everything still works. There
-		 * also seem to be an adapter with id = 0x0000; the
-		 * NCR Parallel Bus Memory Card. Until this is confirmed,
-		 * however, this code will stay.
-		 */
-
-		mca_dev->status = MCA_ADAPTER_ERROR;
-
-		return;
-	} else if (mca_dev->pos_id != 0xffff) {
-
-		/*
-		 * 0xffff usually indicates that there's no adapter,
-		 * however, some integrated adapters may have 0xffff as
-		 * their id and still be valid. Examples are on-board
-		 * VGA of the 55sx, the integrated SCSI of the 56 & 57,
-		 * and possibly also the 95 ULTIMEDIA.
-		 */
-
-		mca_dev->status = MCA_ADAPTER_NORMAL;
-	}
-
-	if ((mca_dev->pos_id == 0xffff ||
-	    mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) {
-		int j;
-
-		for (j = 2; j < 8; j++) {
-			if (mca_dev->pos[j] != 0xff) {
-				mca_dev->status = MCA_ADAPTER_NORMAL;
-				break;
-			}
-		}
-	}
-
-	if (!(mca_dev->pos[2] & MCA_ENABLED)) {
-
-		/* enabled bit is in POS 2 */
-
-		mca_dev->status = MCA_ADAPTER_DISABLED;
-	}
-} /* mca_configure_adapter_status */
-
-/*--------------------------------------------------------------------*/
-
-static struct resource mca_standard_resources[] = {
-	{ .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" },
-	{ .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" },
-	{ .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" },
-	{ .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" },
-	{ .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" },
-	{ .start = 0x96, .end = 0x97, .name = "POS (MCA)" },
-	{ .start = 0x100, .end = 0x107, .name = "POS (MCA)" }
-};
-
-#define MCA_STANDARD_RESOURCES	ARRAY_SIZE(mca_standard_resources)
-
-/*
- *	mca_read_and_store_pos - read the POS registers into a memory buffer
- *      @pos: a char pointer to 8 bytes, contains the POS register value on
- *            successful return
- *
- *	Returns 1 if a card actually exists (i.e. the pos isn't
- *	all 0xff) or 0 otherwise
- */
-static int mca_read_and_store_pos(unsigned char *pos)
-{
-	int j;
-	int found = 0;
-
-	for (j = 0; j < 8; j++) {
-		pos[j] = inb_p(MCA_POS_REG(j));
-		if (pos[j] != 0xff) {
-			/* 0xff all across means no device. 0x00 means
-			 * something's broken, but a device is
-			 * probably there.  However, if you get 0x00
-			 * from a motherboard register it won't matter
-			 * what we find.  For the record, on the
-			 * 57SLC, the integrated SCSI adapter has
-			 * 0xffff for the adapter ID, but nonzero for
-			 * other registers.  */
-
-			found = 1;
-		}
-	}
-	return found;
-}
-
-static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg)
-{
-	unsigned char byte;
-	unsigned long flags;
-
-	if (reg < 0 || reg >= 8)
-		return 0;
-
-	spin_lock_irqsave(&mca_lock, flags);
-	if (mca_dev->pos_register) {
-		/* Disable adapter setup, enable motherboard setup */
-
-		outb_p(0, MCA_ADAPTER_SETUP_REG);
-		outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
-
-		byte = inb_p(MCA_POS_REG(reg));
-		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-	} else {
-
-		/* Make sure motherboard setup is off */
-
-		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
-		/* Read the appropriate register */
-
-		outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG);
-		byte = inb_p(MCA_POS_REG(reg));
-		outb_p(0, MCA_ADAPTER_SETUP_REG);
-	}
-	spin_unlock_irqrestore(&mca_lock, flags);
-
-	mca_dev->pos[reg] = byte;
-
-	return byte;
-}
-
-static void mca_pc_write_pos(struct mca_device *mca_dev, int reg,
-			     unsigned char byte)
-{
-	unsigned long flags;
-
-	if (reg < 0 || reg >= 8)
-		return;
-
-	spin_lock_irqsave(&mca_lock, flags);
-
-	/* Make sure motherboard setup is off */
-
-	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
-	/* Read in the appropriate register */
-
-	outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG);
-	outb_p(byte, MCA_POS_REG(reg));
-	outb_p(0, MCA_ADAPTER_SETUP_REG);
-
-	spin_unlock_irqrestore(&mca_lock, flags);
-
-	/* Update the global register list, while we have the byte */
-
-	mca_dev->pos[reg] = byte;
-
-}
-
-/* for the primary MCA bus, we have identity transforms */
-static int mca_dummy_transform_irq(struct mca_device *mca_dev, int irq)
-{
-	return irq;
-}
-
-static int mca_dummy_transform_ioport(struct mca_device *mca_dev, int port)
-{
-	return port;
-}
-
-static void *mca_dummy_transform_memory(struct mca_device *mca_dev, void *mem)
-{
-	return mem;
-}
-
-
-static int __init mca_init(void)
-{
-	unsigned int i, j;
-	struct mca_device *mca_dev;
-	unsigned char pos[8];
-	short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00};
-	struct mca_bus *bus;
-
-	/*
-	 * WARNING: Be careful when making changes here. Putting an adapter
-	 * and the motherboard simultaneously into setup mode may result in
-	 * damage to chips (according to The Indispensable PC Hardware Book
-	 * by Hans-Peter Messmer). Also, we disable system interrupts (so
-	 * that we are not disturbed in the middle of this).
-	 */
-
-	/* Make sure the MCA bus is present */
-
-	if (mca_system_init()) {
-		printk(KERN_ERR "MCA bus system initialisation failed\n");
-		return -ENODEV;
-	}
-
-	if (!MCA_bus)
-		return -ENODEV;
-
-	printk(KERN_INFO "Micro Channel bus detected.\n");
-
-	/* All MCA systems have at least a primary bus */
-	bus = mca_attach_bus(MCA_PRIMARY_BUS);
-	if (!bus)
-		goto out_nomem;
-	bus->default_dma_mask = 0xffffffffLL;
-	bus->f.mca_write_pos = mca_pc_write_pos;
-	bus->f.mca_read_pos = mca_pc_read_pos;
-	bus->f.mca_transform_irq = mca_dummy_transform_irq;
-	bus->f.mca_transform_ioport = mca_dummy_transform_ioport;
-	bus->f.mca_transform_memory = mca_dummy_transform_memory;
-
-	/* get the motherboard device */
-	mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL);
-	if (unlikely(!mca_dev))
-		goto out_nomem;
-
-	/*
-	 * We do not expect many MCA interrupts during initialization,
-	 * but let us be safe:
-	 */
-	spin_lock_irq(&mca_lock);
-
-	/* Make sure adapter setup is off */
-
-	outb_p(0, MCA_ADAPTER_SETUP_REG);
-
-	/* Read motherboard POS registers */
-
-	mca_dev->pos_register = 0x7f;
-	outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
-	mca_dev->name[0] = 0;
-	mca_read_and_store_pos(mca_dev->pos);
-	mca_configure_adapter_status(mca_dev);
-	/* fake POS and slot for a motherboard */
-	mca_dev->pos_id = MCA_MOTHERBOARD_POS;
-	mca_dev->slot = MCA_MOTHERBOARD;
-	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
-
-	mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
-	if (unlikely(!mca_dev))
-		goto out_unlock_nomem;
-
-	/* Put motherboard into video setup mode, read integrated video
-	 * POS registers, and turn motherboard setup off.
-	 */
-
-	mca_dev->pos_register = 0xdf;
-	outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
-	mca_dev->name[0] = 0;
-	mca_read_and_store_pos(mca_dev->pos);
-	mca_configure_adapter_status(mca_dev);
-	/* fake POS and slot for the integrated video */
-	mca_dev->pos_id = MCA_INTEGVIDEO_POS;
-	mca_dev->slot = MCA_INTEGVIDEO;
-	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
-
-	/*
-	 * Put motherboard into scsi setup mode, read integrated scsi
-	 * POS registers, and turn motherboard setup off.
-	 *
-	 * It seems there are two possible SCSI registers. Martin says that
-	 * for the 56,57, 0xf7 is the one, but fails on the 76.
-	 * Alfredo (apena@vnet.ibm.com) says
-	 * 0xfd works on his machine. We'll try both of them. I figure it's
-	 * a good bet that only one could be valid at a time. This could
-	 * screw up though if one is used for something else on the other
-	 * machine.
-	 */
-
-	for (i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
-		outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG);
-		if (mca_read_and_store_pos(pos))
-			break;
-	}
-	if (which_scsi) {
-		/* found a scsi card */
-		mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
-		if (unlikely(!mca_dev))
-			goto out_unlock_nomem;
-
-		for (j = 0; j < 8; j++)
-			mca_dev->pos[j] = pos[j];
-
-		mca_configure_adapter_status(mca_dev);
-		/* fake POS and slot for integrated SCSI controller */
-		mca_dev->pos_id = MCA_INTEGSCSI_POS;
-		mca_dev->slot = MCA_INTEGSCSI;
-		mca_dev->pos_register = which_scsi;
-		mca_register_device(MCA_PRIMARY_BUS, mca_dev);
-	}
-
-	/* Turn off motherboard setup */
-
-	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
-	/*
-	 * Now loop over MCA slots: put each adapter into setup mode, and
-	 * read its POS registers. Then put adapter setup off.
-	 */
-
-	for (i = 0; i < MCA_MAX_SLOT_NR; i++) {
-		outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG);
-		if (!mca_read_and_store_pos(pos))
-			continue;
-
-		mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
-		if (unlikely(!mca_dev))
-			goto out_unlock_nomem;
-
-		for (j = 0; j < 8; j++)
-			mca_dev->pos[j] = pos[j];
-
-		mca_dev->driver_loaded = 0;
-		mca_dev->slot = i;
-		mca_dev->pos_register = 0;
-		mca_configure_adapter_status(mca_dev);
-		mca_register_device(MCA_PRIMARY_BUS, mca_dev);
-	}
-	outb_p(0, MCA_ADAPTER_SETUP_REG);
-
-	/* Enable interrupts and return memory start */
-	spin_unlock_irq(&mca_lock);
-
-	for (i = 0; i < MCA_STANDARD_RESOURCES; i++)
-		request_resource(&ioport_resource, mca_standard_resources + i);
-
-	mca_do_proc_init();
-
-	return 0;
-
- out_unlock_nomem:
-	spin_unlock_irq(&mca_lock);
- out_nomem:
-	printk(KERN_EMERG "Failed memory allocation in MCA setup!\n");
-	return -ENOMEM;
-}
-
-subsys_initcall(mca_init);
-
-/*--------------------------------------------------------------------*/
-
-static __kprobes void
-mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag)
-{
-	int slot = mca_dev->slot;
-
-	if (slot == MCA_INTEGSCSI) {
-		printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n",
-			mca_dev->name);
-	} else if (slot == MCA_INTEGVIDEO) {
-		printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n",
-			mca_dev->name);
-	} else if (slot == MCA_MOTHERBOARD) {
-		printk(KERN_CRIT "NMI: caused by motherboard (%s)\n",
-			mca_dev->name);
-	}
-
-	/* More info available in POS 6 and 7? */
-
-	if (check_flag) {
-		unsigned char pos6, pos7;
-
-		pos6 = mca_device_read_pos(mca_dev, 6);
-		pos7 = mca_device_read_pos(mca_dev, 7);
-
-		printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7);
-	}
-
-} /* mca_handle_nmi_slot */
-
-/*--------------------------------------------------------------------*/
-
-static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data)
-{
-	struct mca_device *mca_dev = to_mca_device(dev);
-	unsigned char pos5;
-
-	pos5 = mca_device_read_pos(mca_dev, 5);
-
-	if (!(pos5 & 0x80)) {
-		/*
-		 *  Bit 7 of POS 5 is reset when this adapter has a hardware
-		 * error. Bit 7 it reset if there's error information
-		 * available in POS 6 and 7.
-		 */
-		mca_handle_nmi_device(mca_dev, !(pos5 & 0x40));
-		return 1;
-	}
-	return 0;
-}
-
-void __kprobes mca_handle_nmi(void)
-{
-	/*
-	 *  First try - scan the various adapters and see if a specific
-	 * adapter was responsible for the error.
-	 */
-	bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback);
-}
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index ca470e4c92dc..b02d4dd6b8a3 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -97,7 +97,7 @@ static void __init MP_bus_info(struct mpc_bus *m)
 
 	set_bit(m->busid, mp_bus_not_pci);
 	if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
 		mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
 #endif
 	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
@@ -105,12 +105,10 @@ static void __init MP_bus_info(struct mpc_bus *m)
 			x86_init.mpparse.mpc_oem_pci_bus(m);
 
 		clear_bit(m->busid, mp_bus_not_pci);
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
 		mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
 	} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
 		mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
-	} else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) {
-		mp_bus_id_to_type[m->busid] = MP_BUS_MCA;
 #endif
 	} else
 		printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
@@ -368,9 +366,6 @@ static void __init construct_ioapic_table(int mpc_default_type)
 	case 3:
 		memcpy(bus.bustype, "EISA  ", 6);
 		break;
-	case 4:
-	case 7:
-		memcpy(bus.bustype, "MCA   ", 6);
 	}
 	MP_bus_info(&bus);
 	if (mpc_default_type > 4) {
@@ -623,7 +618,7 @@ void __init default_find_smp_config(void)
 		return;
 	/*
 	 * If it is an SMP machine we should know now, unless the
-	 * configuration is in an EISA/MCA bus machine with an
+	 * configuration is in an EISA bus machine with an
 	 * extended bios data area.
 	 *
 	 * there is a real-mode segmented pointer pointing to the
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 47acaf319165..7b3fdfdabf94 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -19,8 +19,6 @@
 #include <linux/slab.h>
 #include <linux/export.h>
 
-#include <linux/mca.h>
-
 #if defined(CONFIG_EDAC)
 #include <linux/edac.h>
 #endif
@@ -282,16 +280,6 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
 
 	__this_cpu_add(nmi_stats.unknown, 1);
 
-#ifdef CONFIG_MCA
-	/*
-	 * Might actually be able to figure out what the guilty party
-	 * is:
-	 */
-	if (MCA_bus) {
-		mca_handle_nmi();
-		return;
-	}
-#endif
 	pr_emerg("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
 		 reason, smp_processor_id());
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 1a2901562059..879166402bf9 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -34,7 +34,6 @@
 #include <linux/memblock.h>
 #include <linux/seq_file.h>
 #include <linux/console.h>
-#include <linux/mca.h>
 #include <linux/root_dev.h>
 #include <linux/highmem.h>
 #include <linux/module.h>
@@ -179,12 +178,6 @@ struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1};
 /* common cpu data for all cpus */
 struct cpuinfo_x86 boot_cpu_data __read_mostly = {0, 0, 0, 0, -1, 1, 0, 0, -1};
 EXPORT_SYMBOL(boot_cpu_data);
-static void set_mca_bus(int x)
-{
-#ifdef CONFIG_MCA
-	MCA_bus = x;
-#endif
-}
 
 unsigned int def_to_bigsmp;
 
@@ -717,7 +710,6 @@ void __init setup_arch(char **cmdline_p)
 	apm_info.bios = boot_params.apm_bios_info;
 	ist_info = boot_params.ist_info;
 	if (boot_params.sys_desc_table.length != 0) {
-		set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
 		machine_id = boot_params.sys_desc_table.table[0];
 		machine_submodel_id = boot_params.sys_desc_table.table[1];
 		BIOS_revision = boot_params.sys_desc_table.table[2];
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index c6eba2b42673..24d3c91e9812 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -14,7 +14,6 @@
 #include <linux/i8253.h>
 #include <linux/time.h>
 #include <linux/export.h>
-#include <linux/mca.h>
 
 #include <asm/vsyscall.h>
 #include <asm/x86_init.h>
@@ -58,11 +57,6 @@ EXPORT_SYMBOL(profile_pc);
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	global_clock_event->event_handler(global_clock_event);
-
-	/* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
-	if (MCA_bus)
-		outb_p(inb_p(0x61)| 0x80, 0x61);
-
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index ff9281f16029..4754f510b360 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -37,10 +37,6 @@
 #include <linux/eisa.h>
 #endif
 
-#ifdef CONFIG_MCA
-#include <linux/mca.h>
-#endif
-
 #if defined(CONFIG_EDAC)
 #include <linux/edac.h>
 #endif