diff options
Diffstat (limited to 'arch/powerpc/oprofile/op_model_fsl_emb.c')
-rw-r--r-- | arch/powerpc/oprofile/op_model_fsl_emb.c | 369 |
1 files changed, 369 insertions, 0 deletions
diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c new file mode 100644 index 000000000000..91596f6ba1f4 --- /dev/null +++ b/arch/powerpc/oprofile/op_model_fsl_emb.c @@ -0,0 +1,369 @@ +/* + * Freescale Embedded oprofile support, based on ppc64 oprofile support + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * + * Copyright (c) 2004 Freescale Semiconductor, Inc + * + * Author: Andy Fleming + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/ptrace.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/reg_fsl_emb.h> +#include <asm/page.h> +#include <asm/pmc.h> +#include <asm/oprofile_impl.h> + +static unsigned long reset_value[OP_MAX_COUNTER]; + +static int num_counters; +static int oprofile_running; + +static inline u32 get_pmlca(int ctr) +{ + u32 pmlca; + + switch (ctr) { + case 0: + pmlca = mfpmr(PMRN_PMLCA0); + break; + case 1: + pmlca = mfpmr(PMRN_PMLCA1); + break; + case 2: + pmlca = mfpmr(PMRN_PMLCA2); + break; + case 3: + pmlca = mfpmr(PMRN_PMLCA3); + break; + default: + panic("Bad ctr number\n"); + } + + return pmlca; +} + +static inline void set_pmlca(int ctr, u32 pmlca) +{ + switch (ctr) { + case 0: + mtpmr(PMRN_PMLCA0, pmlca); + break; + case 1: + mtpmr(PMRN_PMLCA1, pmlca); + break; + case 2: + mtpmr(PMRN_PMLCA2, pmlca); + break; + case 3: + mtpmr(PMRN_PMLCA3, pmlca); + break; + default: + panic("Bad ctr number\n"); + } +} + +static inline unsigned int ctr_read(unsigned int i) +{ + switch(i) { + case 0: + return mfpmr(PMRN_PMC0); + case 1: + return mfpmr(PMRN_PMC1); + case 2: + return mfpmr(PMRN_PMC2); + case 3: + return mfpmr(PMRN_PMC3); + default: + return 0; + } +} + +static inline void ctr_write(unsigned int i, unsigned int val) +{ + switch(i) { + case 0: + mtpmr(PMRN_PMC0, val); + break; + case 1: + mtpmr(PMRN_PMC1, val); + break; + case 2: + mtpmr(PMRN_PMC2, val); + break; + case 3: + mtpmr(PMRN_PMC3, val); + break; + default: + break; + } +} + + +static void init_pmc_stop(int ctr) +{ + u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU | + PMLCA_FCM1 | PMLCA_FCM0); + u32 pmlcb = 0; + + switch (ctr) { + case 0: + mtpmr(PMRN_PMLCA0, pmlca); + mtpmr(PMRN_PMLCB0, pmlcb); + break; + case 1: + mtpmr(PMRN_PMLCA1, pmlca); + mtpmr(PMRN_PMLCB1, pmlcb); + break; + case 2: + mtpmr(PMRN_PMLCA2, pmlca); + mtpmr(PMRN_PMLCB2, pmlcb); + break; + case 3: + mtpmr(PMRN_PMLCA3, pmlca); + mtpmr(PMRN_PMLCB3, pmlcb); + break; + default: + panic("Bad ctr number!\n"); + } +} + +static void set_pmc_event(int ctr, int event) +{ + u32 pmlca; + + pmlca = get_pmlca(ctr); + + pmlca = (pmlca & ~PMLCA_EVENT_MASK) | + ((event << PMLCA_EVENT_SHIFT) & + PMLCA_EVENT_MASK); + + set_pmlca(ctr, pmlca); +} + +static void set_pmc_user_kernel(int ctr, int user, int kernel) +{ + u32 pmlca; + + pmlca = get_pmlca(ctr); + + if(user) + pmlca &= ~PMLCA_FCU; + else + pmlca |= PMLCA_FCU; + + if(kernel) + pmlca &= ~PMLCA_FCS; + else + pmlca |= PMLCA_FCS; + + set_pmlca(ctr, pmlca); +} + +static void set_pmc_marked(int ctr, int mark0, int mark1) +{ + u32 pmlca = get_pmlca(ctr); + + if(mark0) + pmlca &= ~PMLCA_FCM0; + else + pmlca |= PMLCA_FCM0; + + if(mark1) + pmlca &= ~PMLCA_FCM1; + else + pmlca |= PMLCA_FCM1; + + set_pmlca(ctr, pmlca); +} + +static void pmc_start_ctr(int ctr, int enable) +{ + u32 pmlca = get_pmlca(ctr); + + pmlca &= ~PMLCA_FC; + + if (enable) + pmlca |= PMLCA_CE; + else + pmlca &= ~PMLCA_CE; + + set_pmlca(ctr, pmlca); +} + +static void pmc_start_ctrs(int enable) +{ + u32 pmgc0 = mfpmr(PMRN_PMGC0); + + pmgc0 &= ~PMGC0_FAC; + pmgc0 |= PMGC0_FCECE; + + if (enable) + pmgc0 |= PMGC0_PMIE; + else + pmgc0 &= ~PMGC0_PMIE; + + mtpmr(PMRN_PMGC0, pmgc0); +} + +static void pmc_stop_ctrs(void) +{ + u32 pmgc0 = mfpmr(PMRN_PMGC0); + + pmgc0 |= PMGC0_FAC; + + pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE); + + mtpmr(PMRN_PMGC0, pmgc0); +} + +static void dump_pmcs(void) +{ + printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0)); + printk("pmc\t\tpmlca\t\tpmlcb\n"); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0), + mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0)); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1), + mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1)); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2), + mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2)); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3), + mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3)); +} + +static int fsl_emb_cpu_setup(struct op_counter_config *ctr) +{ + int i; + + /* freeze all counters */ + pmc_stop_ctrs(); + + for (i = 0;i < num_counters;i++) { + init_pmc_stop(i); + + set_pmc_event(i, ctr[i].event); + + set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel); + } + + return 0; +} + +static int fsl_emb_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, + int num_ctrs) +{ + int i; + + num_counters = num_ctrs; + + /* Our counters count up, and "count" refers to + * how much before the next interrupt, and we interrupt + * on overflow. So we calculate the starting value + * which will give us "count" until overflow. + * Then we set the events on the enabled counters */ + for (i = 0; i < num_counters; ++i) + reset_value[i] = 0x80000000UL - ctr[i].count; + + return 0; +} + +static int fsl_emb_start(struct op_counter_config *ctr) +{ + int i; + + mtmsr(mfmsr() | MSR_PMM); + + for (i = 0; i < num_counters; ++i) { + if (ctr[i].enabled) { + ctr_write(i, reset_value[i]); + /* Set each enabled counter to only + * count when the Mark bit is *not* set */ + set_pmc_marked(i, 1, 0); + pmc_start_ctr(i, 1); + } else { + ctr_write(i, 0); + + /* Set the ctr to be stopped */ + pmc_start_ctr(i, 0); + } + } + + /* Clear the freeze bit, and enable the interrupt. + * The counters won't actually start until the rfi clears + * the PMM bit */ + pmc_start_ctrs(1); + + oprofile_running = 1; + + pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(), + mfpmr(PMRN_PMGC0)); + + return 0; +} + +static void fsl_emb_stop(void) +{ + /* freeze counters */ + pmc_stop_ctrs(); + + oprofile_running = 0; + + pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(), + mfpmr(PMRN_PMGC0)); + + mb(); +} + + +static void fsl_emb_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned long pc; + int is_kernel; + int val; + int i; + + /* set the PMM bit (see comment below) */ + mtmsr(mfmsr() | MSR_PMM); + + pc = regs->nip; + is_kernel = is_kernel_addr(pc); + + for (i = 0; i < num_counters; ++i) { + val = ctr_read(i); + if (val < 0) { + if (oprofile_running && ctr[i].enabled) { + oprofile_add_ext_sample(pc, regs, i, is_kernel); + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0); + } + } + } + + /* The freeze bit was set by the interrupt. */ + /* Clear the freeze bit, and reenable the interrupt. + * The counters won't actually start until the rfi clears + * the PMM bit */ + pmc_start_ctrs(1); +} + +struct op_powerpc_model op_model_fsl_emb = { + .reg_setup = fsl_emb_reg_setup, + .cpu_setup = fsl_emb_cpu_setup, + .start = fsl_emb_start, + .stop = fsl_emb_stop, + .handle_interrupt = fsl_emb_handle_interrupt, +}; |