diff options
Diffstat (limited to 'arch/cris/arch-v32/drivers/mach-a3/nandflash.c')
| -rw-r--r-- | arch/cris/arch-v32/drivers/mach-a3/nandflash.c | 177 |
1 files changed, 0 insertions, 177 deletions
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c deleted file mode 100644 index 925a98eb6d68..000000000000 --- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * arch/cris/arch-v32/drivers/nandflash.c - * - * Copyright (c) 2007 - * - * Derived from drivers/mtd/nand/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> -#include <arch/memmap.h> -#include <hwregs/reg_map.h> -#include <hwregs/reg_rdwr.h> -#include <hwregs/pio_defs.h> -#include <pinmux.h> -#include <asm/io.h> - -#define MANUAL_ALE_CLE_CONTROL 1 - -#define regf_ALE a0 -#define regf_CLE a1 -#define regf_NCE ce0_n - -#define CLE_BIT 10 -#define ALE_BIT 11 -#define CE_BIT 12 - -struct mtd_info_wrapper { - struct nand_chip chip; -}; - -/* Bitmask for control pins */ -#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT)) - -static struct mtd_info *crisv32_mtd; -/* - * hardware specific access to control-lines - */ -static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - unsigned long flags; - reg_pio_rw_dout dout; - struct nand_chip *this = mtd_to_nand(mtd); - - local_irq_save(flags); - - /* control bits change */ - if (ctrl & NAND_CTRL_CHANGE) { - dout = REG_RD(pio, regi_pio, rw_dout); - dout.regf_NCE = (ctrl & NAND_NCE) ? 0 : 1; - -#if !MANUAL_ALE_CLE_CONTROL - if (ctrl & NAND_ALE) { - /* A0 = ALE high */ - this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio, - regi_pio, rw_io_access1); - } else if (ctrl & NAND_CLE) { - /* A1 = CLE high */ - this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio, - regi_pio, rw_io_access2); - } else { - /* A1 = CLE and A0 = ALE low */ - this->IO_ADDR_W = (void __iomem *)REG_ADDR(pio, - regi_pio, rw_io_access0); - } -#else - - dout.regf_CLE = (ctrl & NAND_CLE) ? 1 : 0; - dout.regf_ALE = (ctrl & NAND_ALE) ? 1 : 0; -#endif - REG_WR(pio, regi_pio, rw_dout, dout); - } - - /* command to chip */ - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); - - local_irq_restore(flags); -} - -/* -* read device ready pin -*/ -static int crisv32_device_ready(struct mtd_info *mtd) -{ - reg_pio_r_din din = REG_RD(pio, regi_pio, r_din); - return din.rdy; -} - -/* - * Main initialization routine - */ -struct mtd_info *__init crisv32_nand_flash_probe(void) -{ - void __iomem *read_cs; - void __iomem *write_cs; - - struct mtd_info_wrapper *wrapper; - struct nand_chip *this; - int err = 0; - - reg_pio_rw_man_ctrl man_ctrl = { - .regf_NCE = regk_pio_yes, -#if MANUAL_ALE_CLE_CONTROL - .regf_ALE = regk_pio_yes, - .regf_CLE = regk_pio_yes -#endif - }; - reg_pio_rw_oe oe = { - .regf_NCE = regk_pio_yes, -#if MANUAL_ALE_CLE_CONTROL - .regf_ALE = regk_pio_yes, - .regf_CLE = regk_pio_yes -#endif - }; - reg_pio_rw_dout dout = { .regf_NCE = 1 }; - - /* Allocate pio pins to pio */ - crisv32_pinmux_alloc_fixed(pinmux_pio); - /* Set up CE, ALE, CLE (ce0_n, a0, a1) for manual control and output */ - REG_WR(pio, regi_pio, rw_man_ctrl, man_ctrl); - REG_WR(pio, regi_pio, rw_dout, dout); - REG_WR(pio, regi_pio, rw_oe, oe); - - /* Allocate memory for MTD device structure and private data */ - wrapper = kzalloc(sizeof(struct mtd_info_wrapper), GFP_KERNEL); - if (!wrapper) { - printk(KERN_ERR "Unable to allocate CRISv32 NAND MTD " - "device structure.\n"); - err = -ENOMEM; - return NULL; - } - - read_cs = write_cs = (void __iomem *)REG_ADDR(pio, regi_pio, - rw_io_access0); - - /* Get pointer to private data */ - this = &wrapper->chip; - crisv32_mtd = nand_to_mtd(this); - - /* Set address of NAND IO lines */ - this->IO_ADDR_R = read_cs; - this->IO_ADDR_W = write_cs; - this->cmd_ctrl = crisv32_hwcontrol; - this->dev_ready = crisv32_device_ready; - /* 20 us command delay time */ - this->chip_delay = 20; - this->ecc.mode = NAND_ECC_SOFT; - this->ecc.algo = NAND_ECC_HAMMING; - - /* Enable the following for a flash based bad block table */ - /* this->bbt_options = NAND_BBT_USE_FLASH; */ - - /* Scan to find existence of the device */ - if (nand_scan(crisv32_mtd, 1)) { - err = -ENXIO; - goto out_mtd; - } - - return crisv32_mtd; - -out_mtd: - kfree(wrapper); - return NULL; -} - |
