diff options
Diffstat (limited to 'arch/arm/plat-s5pc1xx/gpiolib.c')
| -rw-r--r-- | arch/arm/plat-s5pc1xx/gpiolib.c | 503 |
1 files changed, 503 insertions, 0 deletions
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c new file mode 100644 index 000000000000..facb410e7a71 --- /dev/null +++ b/arch/arm/plat-s5pc1xx/gpiolib.c @@ -0,0 +1,503 @@ +/* + * arch/arm/plat-s5pc1xx/gpiolib.c + * + * Copyright 2009 Samsung Electronics Co + * Kyungmin Park <kyungmin.park@samsung.com> + * + * S5PC1XX - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> +#include <mach/gpio-core.h> + +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <plat/regs-gpio.h> + +/* S5PC100 GPIO bank summary: + * + * Bank GPIOs Style INT Type + * A0 8 4Bit GPIO_INT0 + * A1 5 4Bit GPIO_INT1 + * B 8 4Bit GPIO_INT2 + * C 5 4Bit GPIO_INT3 + * D 7 4Bit GPIO_INT4 + * E0 8 4Bit GPIO_INT5 + * E1 6 4Bit GPIO_INT6 + * F0 8 4Bit GPIO_INT7 + * F1 8 4Bit GPIO_INT8 + * F2 8 4Bit GPIO_INT9 + * F3 4 4Bit GPIO_INT10 + * G0 8 4Bit GPIO_INT11 + * G1 3 4Bit GPIO_INT12 + * G2 7 4Bit GPIO_INT13 + * G3 7 4Bit GPIO_INT14 + * H0 8 4Bit WKUP_INT + * H1 8 4Bit WKUP_INT + * H2 8 4Bit WKUP_INT + * H3 8 4Bit WKUP_INT + * I 8 4Bit GPIO_INT15 + * J0 8 4Bit GPIO_INT16 + * J1 5 4Bit GPIO_INT17 + * J2 8 4Bit GPIO_INT18 + * J3 8 4Bit GPIO_INT19 + * J4 4 4Bit GPIO_INT20 + * K0 8 4Bit None + * K1 6 4Bit None + * K2 8 4Bit None + * K3 8 4Bit None + * L0 8 4Bit None + * L1 8 4Bit None + * L2 8 4Bit None + * L3 8 4Bit None + */ + +#define OFF_GPCON (0x00) +#define OFF_GPDAT (0x04) + +#define con_4bit_shift(__off) ((__off) * 4) + +#if 1 +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +/* The s5pc1xx_gpiolib routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of + * the output. + */ + +static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + OFF_GPCON); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + OFF_GPCON); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int s5pc1xx_gpiolib_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + OFF_GPCON); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + OFF_GPDAT); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + OFF_GPDAT); + __raw_writel(con, base + OFF_GPCON); + __raw_writel(dat, base + OFF_GPDAT); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + return S3C_IRQ_GPIO(chip->base + offset); +} + +static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) +{ + int base; + + base = chip->base - S5PC100_GPH0(0); + if (base == 0) + return IRQ_EINT(offset); + base = chip->base - S5PC100_GPH1(0); + if (base == 0) + return IRQ_EINT(8 + offset); + base = chip->base - S5PC100_GPH2(0); + if (base == 0) + return IRQ_EINT(16 + offset); + base = chip->base - S5PC100_GPH3(0); + if (base == 0) + return IRQ_EINT(24 + offset); + return -EINVAL; +} + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_eint = { + .cfg_eint = 0xf, + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_chip s5pc100_gpio_chips[] = { + { + .base = S5PC100_GPA0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPA0(0), + .ngpio = S5PC100_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .base = S5PC100_GPA1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPA1(0), + .ngpio = S5PC100_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .base = S5PC100_GPB_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPB(0), + .ngpio = S5PC100_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5PC100_GPC_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPC(0), + .ngpio = S5PC100_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5PC100_GPD_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPD(0), + .ngpio = S5PC100_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S5PC100_GPE0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPE0(0), + .ngpio = S5PC100_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .base = S5PC100_GPE1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPE1(0), + .ngpio = S5PC100_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .base = S5PC100_GPF0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF0(0), + .ngpio = S5PC100_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .base = S5PC100_GPF1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF1(0), + .ngpio = S5PC100_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .base = S5PC100_GPF2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF2(0), + .ngpio = S5PC100_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .base = S5PC100_GPF3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPF3(0), + .ngpio = S5PC100_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .base = S5PC100_GPG0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG0(0), + .ngpio = S5PC100_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .base = S5PC100_GPG1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG1(0), + .ngpio = S5PC100_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .base = S5PC100_GPG2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG2(0), + .ngpio = S5PC100_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .base = S5PC100_GPG3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPG3(0), + .ngpio = S5PC100_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .base = S5PC100_GPH0_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH0(0), + .ngpio = S5PC100_GPIO_H0_NR, + .label = "GPH0", + }, + }, { + .base = S5PC100_GPH1_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH1(0), + .ngpio = S5PC100_GPIO_H1_NR, + .label = "GPH1", + }, + }, { + .base = S5PC100_GPH2_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH2(0), + .ngpio = S5PC100_GPIO_H2_NR, + .label = "GPH2", + }, + }, { + .base = S5PC100_GPH3_BASE, + .config = &gpio_cfg_eint, + .chip = { + .base = S5PC100_GPH3(0), + .ngpio = S5PC100_GPIO_H3_NR, + .label = "GPH3", + }, + }, { + .base = S5PC100_GPI_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPI(0), + .ngpio = S5PC100_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5PC100_GPJ0_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ0(0), + .ngpio = S5PC100_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .base = S5PC100_GPJ1_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ1(0), + .ngpio = S5PC100_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .base = S5PC100_GPJ2_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ2(0), + .ngpio = S5PC100_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .base = S5PC100_GPJ3_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ3(0), + .ngpio = S5PC100_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .base = S5PC100_GPJ4_BASE, + .config = &gpio_cfg, + .chip = { + .base = S5PC100_GPJ4(0), + .ngpio = S5PC100_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .base = S5PC100_GPK0_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK0(0), + .ngpio = S5PC100_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .base = S5PC100_GPK1_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK1(0), + .ngpio = S5PC100_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .base = S5PC100_GPK2_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK2(0), + .ngpio = S5PC100_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .base = S5PC100_GPK3_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK3(0), + .ngpio = S5PC100_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .base = S5PC100_GPL0_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL0(0), + .ngpio = S5PC100_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .base = S5PC100_GPL1_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL1(0), + .ngpio = S5PC100_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .base = S5PC100_GPL2_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL2(0), + .ngpio = S5PC100_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .base = S5PC100_GPL3_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL3(0), + .ngpio = S5PC100_GPIO_L3_NR, + .label = "GPL3", + }, + }, { + .base = S5PC100_GPL4_BASE, + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL4(0), + .ngpio = S5PC100_GPIO_L4_NR, + .label = "GPL4", + }, + }, +}; + +/* FIXME move from irq-gpio.c */ +extern struct irq_chip s5pc1xx_gpioint; +extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc); + +static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = s5pc1xx_gpiolib_input; + chip->chip.direction_output = s5pc1xx_gpiolib_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); + + /* Interrupt */ + if (chip->config == &gpio_cfg) { + int i, irq; + + chip->chip.to_irq = s5pc1xx_gpiolib_to_irq; + + for (i = 0; i < chip->chip.ngpio; i++) { + irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i; + set_irq_chip(irq, &s5pc1xx_gpioint); + set_irq_data(irq, &chip->chip); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + } else if (chip->config == &gpio_cfg_eint) + chip->chip.to_irq = s5pc1xx_gpiolib_to_eint; +} + +static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips, + int nr_chips, + void (*fn)(struct s3c_gpio_chip *)) +{ + for (; nr_chips > 0; nr_chips--, chips++) { + if (fn) + (fn)(chips); + s3c_gpiolib_add(chips); + } +} + +static __init int s5pc1xx_gpiolib_init(void) +{ + struct s3c_gpio_chip *chips; + int nr_chips; + + chips = s5pc100_gpio_chips; + nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); + + s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link); + /* Interrupt */ + set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler); + + return 0; +} +core_initcall(s5pc1xx_gpiolib_init); |
