diff options
Diffstat (limited to 'arch/arm/mach-omap2/cm2xxx.c')
| -rw-r--r-- | arch/arm/mach-omap2/cm2xxx.c | 381 |
1 files changed, 381 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c new file mode 100644 index 000000000000..db650690e9d0 --- /dev/null +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -0,0 +1,381 @@ +/* + * OMAP2xxx CM module functions + * + * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc. + * Paul Walmsley + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include "soc.h" +#include "iomap.h" +#include "common.h" +#include "prm2xxx.h" +#include "cm.h" +#include "cm2xxx.h" +#include "cm-regbits-24xx.h" +#include "clockdomain.h" + +/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */ +#define DPLL_AUTOIDLE_DISABLE 0x0 +#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3 + +/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */ +#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0 +#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 + +/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */ +#define EN_APLL_LOCKED 3 + +static const u8 omap2xxx_cm_idlest_offs[] = { + CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4 +}; + +/* + * + */ + +static void _write_clktrctrl(u8 c, s16 module, u32 mask) +{ + u32 v; + + v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL); + v &= ~mask; + v |= c << __ffs(mask); + omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL); +} + +bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) +{ + u32 v; + + v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL); + v &= mask; + v >>= __ffs(mask); + + return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; +} + +void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) +{ + _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask); +} + +void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask) +{ + _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask); +} + +/* + * DPLL autoidle control + */ + +static void _omap2xxx_set_dpll_autoidle(u8 m) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); + v &= ~OMAP24XX_AUTO_DPLL_MASK; + v |= m << OMAP24XX_AUTO_DPLL_SHIFT; + omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); +} + +void omap2xxx_cm_set_dpll_disable_autoidle(void) +{ + _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP); +} + +void omap2xxx_cm_set_dpll_auto_low_power_stop(void) +{ + _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE); +} + +/* + * APLL control + */ + +static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); + v &= ~mask; + v |= m << __ffs(mask); + omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE); +} + +void omap2xxx_cm_set_apll54_disable_autoidle(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, + OMAP24XX_AUTO_54M_MASK); +} + +void omap2xxx_cm_set_apll54_auto_low_power_stop(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, + OMAP24XX_AUTO_54M_MASK); +} + +void omap2xxx_cm_set_apll96_disable_autoidle(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP, + OMAP24XX_AUTO_96M_MASK); +} + +void omap2xxx_cm_set_apll96_auto_low_power_stop(void) +{ + _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE, + OMAP24XX_AUTO_96M_MASK); +} + +/* Enable an APLL if off */ +static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit) +{ + u32 v, m; + + m = EN_APLL_LOCKED << enable_bit; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + if (v & m) + return 0; /* apll already enabled */ + + v |= m; + omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); + + omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit); + + /* + * REVISIT: Should we return an error code if + * omap2xxx_cm_wait_module_ready() fails? + */ + return 0; +} + +/* Stop APLL */ +static void _omap2xxx_apll_disable(u8 enable_bit) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + v &= ~(EN_APLL_LOCKED << enable_bit); + omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); +} + +/* Enable an APLL if off */ +int omap2xxx_cm_apll54_enable(void) +{ + return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT, + OMAP24XX_ST_54M_APLL_SHIFT); +} + +/* Enable an APLL if off */ +int omap2xxx_cm_apll96_enable(void) +{ + return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT, + OMAP24XX_ST_96M_APLL_SHIFT); +} + +/* Stop APLL */ +void omap2xxx_cm_apll54_disable(void) +{ + _omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT); +} + +/* Stop APLL */ +void omap2xxx_cm_apll96_disable(void) +{ + _omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT); +} + +/** + * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * XXX This function is only needed until absolute register addresses are + * removed from the OMAP struct clk records. + */ +int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) +{ + unsigned long offs; + u8 idlest_offs; + int i; + + if (idlest_reg < cm_base || idlest_reg > (cm_base + 0x0fff)) + return -EINVAL; + + idlest_offs = (unsigned long)idlest_reg & 0xff; + for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) { + if (idlest_offs == omap2xxx_cm_idlest_offs[i]) { + *idlest_reg_id = i + 1; + break; + } + } + + if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs)) + return -EINVAL; + + offs = idlest_reg - cm_base; + offs &= 0xff00; + *prcm_inst = offs; + + return 0; +} + +/* + * + */ + +/** + * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby + * @prcm_mod: PRCM module offset + * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon + * success or -EBUSY if the module doesn't enable in time. + */ +int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) +{ + int ena = 0, i = 0; + u8 cm_idlest_reg; + u32 mask; + + if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs))) + return -EINVAL; + + cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1]; + + mask = 1 << idlest_shift; + ena = mask; + + omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & + mask) == ena), MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} + +/* Clockdomain low-level functions */ + +static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm) +{ + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_add_autodeps(clkdm); + + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); +} + +static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm) +{ + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (atomic_read(&clkdm->usecount) > 0) + _clkdm_del_autodeps(clkdm); +} + +static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + _clkdm_add_autodeps(clkdm); + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap2xxx_clkdm_wakeup(clkdm); + } + + return 0; +} + +static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + _clkdm_del_autodeps(clkdm); + omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap2xxx_clkdm_sleep(clkdm); + } + + return 0; +} + +struct clkdm_ops omap2_clkdm_operations = { + .clkdm_add_wkdep = omap2_clkdm_add_wkdep, + .clkdm_del_wkdep = omap2_clkdm_del_wkdep, + .clkdm_read_wkdep = omap2_clkdm_read_wkdep, + .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps, + .clkdm_sleep = omap2xxx_clkdm_sleep, + .clkdm_wakeup = omap2xxx_clkdm_wakeup, + .clkdm_allow_idle = omap2xxx_clkdm_allow_idle, + .clkdm_deny_idle = omap2xxx_clkdm_deny_idle, + .clkdm_clk_enable = omap2xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap2xxx_clkdm_clk_disable, +}; + +/* + * + */ + +static struct cm_ll_data omap2xxx_cm_ll_data = { + .split_idlest_reg = &omap2xxx_cm_split_idlest_reg, + .wait_module_ready = &omap2xxx_cm_wait_module_ready, +}; + +int __init omap2xxx_cm_init(void) +{ + if (!cpu_is_omap24xx()) + return 0; + + return cm_register(&omap2xxx_cm_ll_data); +} + +static void __exit omap2xxx_cm_exit(void) +{ + if (!cpu_is_omap24xx()) + return; + + /* Should never happen */ + WARN(cm_unregister(&omap2xxx_cm_ll_data), + "%s: cm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap2xxx_cm_exit); |
