1 files changed, 0 insertions, 101 deletions
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
deleted file mode 100644
index 5c1a26c9f490..000000000000
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* arch/arm/mach-omap1/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/serial_reg.h>
-
-#include "serial.h"
-
-		.pushsection .data
-omap_uart_phys:	.word	0x0
-omap_uart_virt:	.word	0x0
-		.popsection
-
-		/*
-		 * Note that this code won't work if the bootloader passes
-		 * a wrong machine ID number in r1. To debug, just hardcode
-		 * the desired UART phys and virt addresses temporarily into
-		 * the omap_uart_phys and omap_uart_virt above.
-		 */
-		.macro	addruart, rp, rv, tmp
-
-		/* Use omap_uart_phys/virt if already configured */
-9:		adr	\rp, 99f		@ get effective addr of 99f
-		ldr	\rv, [\rp]		@ get absolute addr of 99f
-		sub	\rv, \rv, \rp		@ offset between the two
-		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
-		sub	\tmp, \rp, \rv		@ make it effective
-		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
-		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
-		cmp	\rp, #0			@ is port configured?
-		cmpne	\rv, #0
-		bne	100f			@ already configured
-
-		/* Check the debug UART configuration set in uncompress.h */
-		and	\rp, pc, #0xff000000
-		ldr	\rv, =OMAP_UART_INFO_OFS
-		ldr	\rp, [\rp, \rv]
-
-		/* Select the UART to use based on the UART1 scratchpad value */
-10:		cmp	\rp, #0			@ no port configured?
-		beq	11f			@ if none, try to use UART1
-		cmp	\rp, #OMAP1UART1
-		beq	11f			@ configure OMAP1UART1
-		cmp	\rp, #OMAP1UART2
-		beq	12f			@ configure OMAP1UART2
-		cmp	\rp, #OMAP1UART3
-		beq	13f			@ configure OMAP2UART3
-
-		/* Configure the UART offset from the phys/virt base */
-11:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		b	98f
-12:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
-		b	98f
-13:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
-		orr	\rp, \rp, #0x00009000	@ OMAP1UART3
-
-		/* Store both phys and virt address for the uart */
-98:		add	\rp, \rp, #0xff000000	@ phys base
-		str	\rp, [\tmp, #0]		@ omap_uart_phys
-		sub	\rp, \rp, #0xff000000	@ phys base
-		add	\rp, \rp, #0xfe000000	@ virt base
-		str	\rp, [\tmp, #4]		@ omap_uart_virt
-		b	9b
-
-		.align
-99:		.word	.
-		.word	omap_uart_phys
-		.ltorg
-
-100:
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
-		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		beq	1002f
-		ldrb	\rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
-		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		bne	1001b
-1002:
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm