diff options
Diffstat (limited to 'arch/arm/mach-mxs/gpio.c')
| -rw-r--r-- | arch/arm/mach-mxs/gpio.c | 331 |
1 files changed, 0 insertions, 331 deletions
diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c deleted file mode 100644 index 2c950fef71a8..000000000000 --- a/arch/arm/mach-mxs/gpio.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <asm-generic/bug.h> - -#include "gpio.h" - -static struct mxs_gpio_port *mxs_gpio_ports; -static int gpio_table_size; - -#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10) -#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10) -#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10) -#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10) -#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10) -#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10) -#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10) -#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10) - -#define GPIO_INT_FALL_EDGE 0x0 -#define GPIO_INT_LOW_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_HIGH_LEV 0x3 -#define GPIO_INT_LEV_MASK (1 << 0) -#define GPIO_INT_POL_MASK (1 << 1) - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index) -{ - __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id)); -} - -static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index, - int enable) -{ - if (enable) { - __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id)); - __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id)); - } else { - __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id)); - } -} - -static void mxs_gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void mxs_gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void mxs_gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 pin_mask = 1 << (gpio & 31); - struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; - void __iomem *pin_addr; - int edge; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - /* set level or edge */ - pin_addr = port->base + PINCTRL_IRQLEV(port->id); - if (edge & GPIO_INT_LEV_MASK) - __mxs_setl(pin_mask, pin_addr); - else - __mxs_clrl(pin_mask, pin_addr); - - /* set polarity */ - pin_addr = port->base + PINCTRL_IRQPOL(port->id); - if (edge & GPIO_INT_POL_MASK) - __mxs_setl(pin_mask, pin_addr); - else - __mxs_clrl(pin_mask, pin_addr); - - clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -/* MXS has one interrupt *per* gpio port */ -static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq); - u32 gpio_irq_no_base = port->virtual_irq_start; - - desc->irq_data.chip->irq_ack(&desc->irq_data); - - irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & - __raw_readl(port->base + PINCTRL_IRQEN(port->id)); - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - generic_handle_irq(gpio_irq_no_base + irqoffset); - irq_stat &= ~(1 << irqoffset); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1f; - struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "mxs gpio", - .irq_ack = mxs_gpio_ack_irq, - .irq_mask = mxs_gpio_mask_irq, - .irq_unmask = mxs_gpio_unmask_irq, - .irq_set_type = mxs_gpio_set_irq_type, - .irq_set_wake = mxs_gpio_set_wake_irq, -}; - -static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id); - - if (dir) - __mxs_setl(1 << offset, pin_addr); - else - __mxs_clrl(1 << offset, pin_addr); -} - -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1; -} - -static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id); - - if (value) - __mxs_setl(1 << offset, pin_addr); - else - __mxs_clrl(1 << offset, pin_addr); -} - -static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return port->virtual_irq_start + offset; -} - -static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - mxs_set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxs_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxs_gpio_set(chip, offset, value); - mxs_set_gpio_direction(chip, offset, 1); - return 0; -} - -int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxs_gpio_ports = port; - gpio_table_size = cnt; - - pr_info("MXS GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i)); - __raw_writel(0, port[i].base + PINCTRL_IRQEN(i)); - - /* clear address has to be used to clear IRQSTAT bits */ - __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i)); - - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - - /* register gpio chip */ - port[i].chip.direction_input = mxs_gpio_direction_input; - port[i].chip.direction_output = mxs_gpio_direction_output; - port[i].chip.get = mxs_gpio_get; - port[i].chip.set = mxs_gpio_set; - port[i].chip.to_irq = mxs_gpio_to_irq; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - /* its a serious configuration bug when it fails */ - BUG_ON(gpiochip_add(&port[i].chip) < 0); - } - - return 0; -} - -#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR) -#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR) - -#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \ - { \ - .chip.label = "gpio-" #_id, \ - .id = _id, \ - .irq = _irq, \ - .base = _base, \ - .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ - } - -#ifdef CONFIG_SOC_IMX23 -static struct mxs_gpio_port mx23_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0), - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1), - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2), -}; - -int __init mx23_register_gpios(void) -{ - return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports)); -} -#endif - -#ifdef CONFIG_SOC_IMX28 -static struct mxs_gpio_port mx28_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4), -}; - -int __init mx28_register_gpios(void) -{ - return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports)); -} -#endif |
