diff options
Diffstat (limited to 'arch/arm/mach-bcmring/include/mach/memory_settings.h')
| -rw-r--r-- | arch/arm/mach-bcmring/include/mach/memory_settings.h | 67 |
1 files changed, 67 insertions, 0 deletions
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h new file mode 100644 index 000000000000..ce5cd16f2ac4 --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/memory_settings.h @@ -0,0 +1,67 @@ +/***************************************************************************** +* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +#ifndef MEMORY_SETTINGS_H +#define MEMORY_SETTINGS_H + +/* ---- Include Files ---------------------------------------- */ +/* ---- Constants and Types ---------------------------------- */ + +/* Memory devices */ +/* NAND Flash timing for 166 MHz setting */ +#define HW_CFG_NAND_tBTA (5 << 16) /* Bus turnaround cycle (n) 0-7 (30 ns) */ +#define HW_CFG_NAND_tWP (4 << 11) /* Write pulse width cycle (n+1) 0-31 (25 ns) */ +#define HW_CFG_NAND_tWR (1 << 9) /* Write recovery cycle (n+1) 0-3 (10 ns) */ +#define HW_CFG_NAND_tAS (0 << 7) /* Write address setup cycle (n+1) 0-3 ( 0 ns) */ +#define HW_CFG_NAND_tOE (3 << 5) /* Output enable delay cycle (n) 0-3 (15 ns) */ +#define HW_CFG_NAND_tRC (7 << 0) /* Read access cycle (n+2) 0-31 (50 ns) */ + +#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \ + | HW_CFG_NAND_tWP \ + | HW_CFG_NAND_tWR \ + | HW_CFG_NAND_tAS \ + | HW_CFG_NAND_tOE \ + | HW_CFG_NAND_tRC) + +/* NOR Flash timing for 166 MHz setting */ +#define HW_CFG_NOR_TPRC_TWLC (0 << 19) /* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */ +#define HW_CFG_NOR_TBTA (0 << 16) /* Bus turnaround cycle (n) (DNA) */ +#define HW_CFG_NOR_TWP (6 << 11) /* Write pulse width cycle (n+1) (35ns) */ +#define HW_CFG_NOR_TWR (0 << 9) /* Write recovery cycle (n+1) (0ns) */ +#define HW_CFG_NOR_TAS (0 << 7) /* Write address setup cycle (n+1) (0ns) */ +#define HW_CFG_NOR_TOE (0 << 5) /* Output enable delay cycle (n) (max 25ns) */ +#define HW_CFG_NOR_TRC_TLC (0x10 << 0) /* Read access cycle / Burst read latency (n+2 / n+1) (100ns) */ + +#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \ + | HW_CFG_NOR_TBTA \ + | HW_CFG_NOR_TWP \ + | HW_CFG_NOR_TWR \ + | HW_CFG_NOR_TAS \ + | HW_CFG_NOR_TOE \ + | HW_CFG_NOR_TRC_TLC) + +#define HW_CFG_FLASH1_TCR HW_CFG_FLASH0_TCR +#define HW_CFG_FLASH2_TCR HW_CFG_FLASH0_TCR + +/* SDRAM Settings */ +/* #define HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */ +/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */ +/* #define HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */ +/* #define HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */ +#define HW_CFG_SDRAM_SIZE_BYTES 0x10000000 /* Total memory, not per device size */ + +/* ---- Variable Externs ------------------------------------- */ +/* ---- Function Prototypes ---------------------------------- */ + +#endif /* MEMORY_SETTINGS_H */ |
