diff options
Diffstat (limited to 'arch/arm/boot/dts/at91sam9x5.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/at91sam9x5.dtsi | 92 |
1 files changed, 44 insertions, 48 deletions
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 7723e8b02880..57f307541d2e 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -481,6 +481,38 @@ }; }; + ebi { + pinctrl_ebi_data_0_7: ebi-data-lsb-0 { + atmel,pins = + <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_data_8_15: ebi-data-msb-0 { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_addr_nand: ebi-addr-0 { + atmel,pins = + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + usart0 { pinctrl_usart0: usart0-0 { atmel,pins = @@ -567,34 +599,20 @@ }; nand { - pinctrl_nand: nand-0 { + pinctrl_nand_oe_we: nand-oe-we-0 { atmel,pins = - <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ - AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ - AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ - AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ - AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ - AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY/BUSY pin pull_up */ - AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD6 periph A Data bit 0 */ - AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A Data bit 1 */ - AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A Data bit 2 */ - AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A Data bit 3 */ - AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A Data bit 4 */ - AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A Data bit 5 */ - AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD12 periph A Data bit 6 */ - AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */ - }; - - pinctrl_nand_16bits: nand_16bits-0 { + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand_cs: nand-cs-0 { atmel,pins = - <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A Data bit 8 */ - AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A Data bit 9 */ - AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD16 periph A Data bit 10 */ - AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A Data bit 11 */ - AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD18 periph A Data bit 12 */ - AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD19 periph A Data bit 13 */ - AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD20 periph A Data bit 14 */ - AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */ + <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; }; @@ -1213,28 +1231,6 @@ }; }; - nand0: nand@40000000 { - compatible = "atmel,at91rm9200-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40000000 0x10000000 - 0xffffe000 0x600 /* PMECC Registers */ - 0xffffe600 0x200 /* PMECC Error Location Registers */ - 0x00108000 0x18000 /* PMECC looup table in ROM code */ - >; - atmel,pmecc-lookup-table-offset = <0x0 0x8000>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 GPIO_ACTIVE_HIGH - &pioD 4 GPIO_ACTIVE_HIGH - 0 - >; - status = "disabled"; - }; - usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; |
