diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-kizbox2.dts')
| -rw-r--r-- | arch/arm/boot/dts/at91-kizbox2.dts | 244 |
1 files changed, 0 insertions, 244 deletions
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts deleted file mode 100644 index 86d821884bd4..000000000000 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ /dev/null @@ -1,244 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board - * - * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> - */ -/dts-v1/; -#include "sama5d31.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Overkiz Kizbox 2"; - compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - - chosen { - bootargs = "ubi.mtd=ubi"; - stdout-path = &dbgu; - }; - - memory { - reg = <0x20000000 0x10000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - i2c1: i2c@f0018000 { - status = "okay"; - - pmic: act8865@5b { - compatible = "active-semi,act8865"; - reg = <0x5b>; - status = "okay"; - - regulators { - vcc_1v8_reg: DCDC_REG1 { - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_1v2_reg: DCDC_REG2 { - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_3v3_reg: DCDC_REG3 { - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vddfuse_reg: LDO_REG1 { - regulator-name = "FUSE_2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - vddana_reg: LDO_REG2 { - regulator-name = "VDDANA"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vled_reg: LDO_REG3 { - regulator-name = "VLED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - v3v8_rf_reg: LDO_REG4 { - regulator-name = "V3V8_RF"; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - regulator-always-on; - }; - }; - }; - }; - - tcb0: timer@f0010000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - usart0: serial@f001c000 { - status = "okay"; - }; - - usart1: serial@f0020000 { - status = "okay"; - }; - - pwm0: pwm@f002c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 - &pinctrl_pwm0_pwmh1_1 - &pinctrl_pwm0_pwmh2_0>; - status = "okay"; - }; - - adc0: adc@f8018000 { - atmel,adc-vref = <3333>; - status = "okay"; - }; - - usart2: serial@f8020000 { - status = "okay"; - }; - - macb1: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - dbgu: serial@ffffee00 { - status = "okay"; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - - usb1: ohci@600000 { - status = "okay"; - }; - - usb2: ehci@700000 { - status = "okay"; - }; - - ebi: ebi@10000000 { - pinctrl-0 = <&pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - prog { - label = "PB_PROG"; - gpios = <&pioE 27 GPIO_ACTIVE_LOW>; - linux,code = <0x102>; - wakeup-source; - }; - - reset { - label = "PB_RST"; - gpios = <&pioE 29 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - wakeup-source; - }; - - user { - label = "PB_USER"; - gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; - linux,code = <0x101>; - wakeup-source; - }; - }; - - pwm_leds { - compatible = "pwm-leds"; - - blue { - label = "pwm:blue:user"; - pwms = <&pwm0 2 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - green { - label = "pwm:green:user"; - pwms = <&pwm0 1 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - red { - label = "pwm:red:user"; - pwms = <&pwm0 0 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; -}; |
