diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 114 |
1 files changed, 90 insertions, 24 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8fecefe881cd..970de7518341 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -117,17 +117,20 @@ choice config AT91_DEBUG_LL_DBGU0 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12" select DEBUG_AT91_UART - depends on HAVE_AT91_DBGU0 + depends on ARCH_AT91 + depends on SOC_AT91RM9200 || SOC_AT91SAM9 config AT91_DEBUG_LL_DBGU1 bool "Kernel low-level debugging on 9263, 9g45 and sama5d3" select DEBUG_AT91_UART - depends on HAVE_AT91_DBGU1 + depends on ARCH_AT91 + depends on SOC_AT91SAM9 || SOC_SAMA5 config AT91_DEBUG_LL_DBGU2 bool "Kernel low-level debugging on sama5d4" select DEBUG_AT91_UART - depends on HAVE_AT91_DBGU2 + depends on ARCH_AT91 + depends on SOC_SAMA5 config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" @@ -244,6 +247,13 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port in the DC21285 (Footbridge). + config DEBUG_DIGICOLOR_UA0 + bool "Kernel low-level debugging messages via Digicolor UA0" + depends on ARCH_DIGICOLOR + help + Say Y here if you want the debug print routines to direct + their output to the UA0 serial port in the CX92755. + config DEBUG_FOOTBRIDGE_COM1 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" depends on FOOTBRIDGE @@ -275,6 +285,14 @@ choice Say Y here if you want the debug print routines to direct their output to the UART on Highbank based devices. + config DEBUG_HIP01_UART + bool "Hisilicon Hip01 Debug UART" + depends on ARCH_HIP01 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on HIP01 UART. + config DEBUG_HIP04_UART bool "Hisilicon HiP04 Debug UART" depends on ARCH_HIP04 @@ -437,7 +455,7 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port on MSM devices. - ARCH DEBUG_UART_PHYS DEBUG_UART_BASE # + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT # MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 @@ -456,7 +474,8 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port on Qualcomm devices. - ARCH DEBUG_UART_PHYS DEBUG_UART_BASE + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT + APQ8064 0x16640000 0xf0040000 APQ8084 0xf995e000 0xfa75e000 MSM8X60 0x19c40000 0xf0040000 MSM8960 0x16440000 0xf0040000 @@ -465,13 +484,13 @@ choice Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration options based on your needs. - config DEBUG_MVEBU_UART - bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" + config DEBUG_MVEBU_UART0 + bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)" depends on ARCH_MVEBU select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on MVEBU based platforms. + on MVEBU based platforms on UART0. This option should be used with the old bootloaders that left the internal registers mapped at @@ -484,13 +503,28 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. - config DEBUG_MVEBU_UART_ALTERNATE - bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)" + config DEBUG_MVEBU_UART0_ALTERNATE + bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)" + depends on ARCH_MVEBU + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on MVEBU based platforms on UART0. + + This option should be used with the new bootloaders + that remap the internal registers at 0xf1000000. + + If the wrong DEBUG_MVEBU_UART* option is selected, + when u-boot hands over to the kernel, the system + silently crashes, with no serial output at all. + + config DEBUG_MVEBU_UART1_ALTERNATE + bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)" depends on ARCH_MVEBU select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on MVEBU based platforms. + on MVEBU based platforms on UART1. This option should be used with the new bootloaders that remap the internal registers at 0xf1000000. @@ -981,16 +1015,28 @@ choice config DEBUG_SIRFPRIMA2_UART1 bool "Kernel low-level debugging messages via SiRFprimaII UART1" depends on ARCH_PRIMA2 + select DEBUG_SIRFSOC_UART help Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFprimaII devices. - config DEBUG_SIRFMARCO_UART1 - bool "Kernel low-level debugging messages via SiRFmarco UART1" - depends on ARCH_MARCO + config DEBUG_SIRFATLAS7_UART0 + bool "Kernel low-level debugging messages via SiRFatlas7 UART0" + depends on ARCH_ATLAS7 + select DEBUG_SIRFSOC_UART help Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFmarco devices. + their output to the uart0 port on SiRFATLAS7 devices.The uart0 + is used on SiRFATLAS7 as a extra debug port.sometimes an extra + debug port can be very useful. + + config DEBUG_SIRFATLAS7_UART1 + bool "Kernel low-level debugging messages via SiRFatlas7 UART1" + depends on ARCH_ATLAS7 + select DEBUG_SIRFSOC_UART + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFATLAS7 devices. config STIH41X_DEBUG_ASC2 bool "Use StiH415/416 ASC2 UART for low-level debug" @@ -1038,7 +1084,7 @@ choice for Mediatek mt6589 based platforms on UART0. config DEBUG_MT8127_UART0 - bool "Mediatek mt8127 UART0" + bool "Mediatek mt8127/mt6592 UART0" depends on ARCH_MEDIATEK select DEBUG_UART_8250 help @@ -1165,6 +1211,10 @@ choice endchoice +config DEBUG_AT91_UART + bool + depends on ARCH_AT91 + config DEBUG_EXYNOS_UART bool @@ -1217,12 +1267,15 @@ config DEBUG_STI_UART bool depends on ARCH_STI +config DEBUG_SIRFSOC_UART + bool + depends on ARCH_SIRF + config DEBUG_LL_INCLUDE string default "debug/sa1100.S" if DEBUG_SA1100 default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default "debug/at91.S" if AT91_DEBUG_LL_DBGU0 || AT91_DEBUG_LL_DBGU1 || \ - AT91_DEBUG_LL_DBGU2 + default "debug/at91.S" if DEBUG_AT91_UART default "debug/asm9260.S" if DEBUG_ASM9260_UART default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 default "debug/meson.S" if DEBUG_MESON_UARTAO @@ -1255,7 +1308,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART - default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 + default "debug/sirf.S" if DEBUG_SIRFSOC_UART default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART @@ -1264,6 +1317,7 @@ config DEBUG_LL_INCLUDE default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX + default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 default "mach/debug-macro.S" # Compatibility options for PL01x @@ -1307,7 +1361,10 @@ config DEBUG_UART_PHYS default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if ARCH_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X + default 0x18010000 if DEBUG_SIRFATLAS7_UART0 + default 0x18020000 if DEBUG_SIRFATLAS7_UART1 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0x20001000 if DEBUG_HIP01_UART default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 @@ -1332,12 +1389,13 @@ config DEBUG_UART_PHYS default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xa9a00000 if DEBUG_MSM_UART + default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX - default 0xd0012000 if DEBUG_MVEBU_UART + default 0xd0012000 if DEBUG_MVEBU_UART0 default 0xc81004c0 if DEBUG_MESON_UARTAO default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 @@ -1351,7 +1409,8 @@ config DEBUG_UART_PHYS default 0xe8008000 if DEBUG_R7S72100_SCIF2 default 0xf0000be0 if ARCH_EBSA110 default 0xf040ab00 if DEBUG_BRCMSTB_UART - default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE + default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE + default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART @@ -1380,7 +1439,8 @@ config DEBUG_UART_PHYS DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART + DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ + DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1438,8 +1498,12 @@ config DEBUG_UART_VIRT default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 default 0xfec02000 if DEBUG_SOCFPGA_UART - default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE + default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE + default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE + default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 + default 0xfec20000 if DEBUG_SIRFATLAS7_UART1 + default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1 default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 @@ -1458,12 +1522,14 @@ config DEBUG_UART_VIRT default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 default 0xfefff700 if ARCH_IOP33X default 0xff003000 if DEBUG_U300_UART + default 0xffd01000 if DEBUG_HIP01_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_MSM_UART || DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART + DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ + DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" |
