diff options
Diffstat (limited to 'Documentation')
9 files changed, 259 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt b/Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt new file mode 100644 index 000000000000..0a2df4338332 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt @@ -0,0 +1,31 @@ +Lantiq XWAY SoC FPI BUS binding +============================ + + +------------------------------------------------------------------------------- +Required properties: +- compatible : Should be one of + "lantiq,xrx200-fpi" +- reg : The address and length of the XBAR + configuration register. + Address and length of the FPI bus itself. +- lantiq,rcu : A phandle to the RCU syscon +- lantiq,offset-endianness : Offset of the endianness configuration + register + +------------------------------------------------------------------------------- +Example for the FPI on the xrx200 SoCs: + fpi@10000000 { + compatible = "lantiq,xrx200-fpi"; + ranges = <0x0 0x10000000 0xf000000>; + reg = <0x1f400000 0x1000>, + <0x10000000 0xf000000>; + lantiq,rcu = <&rcu0>; + lantiq,offset-endianness = <0x4c>; + #address-cells = <1>; + #size-cells = <1>; + + gptu@e100a00 { + ...... + }; + }; diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt new file mode 100644 index 000000000000..a0c19bd1ce66 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt @@ -0,0 +1,36 @@ +Lantiq XWAY SoC GPHY binding +============================ + +This binding describes a software-defined ethernet PHY, provided by the RCU +module on newer Lantiq XWAY SoCs (xRX200 and newer). + +------------------------------------------------------------------------------- +Required properties: +- compatible : Should be one of + "lantiq,xrx200a1x-gphy" + "lantiq,xrx200a2x-gphy" + "lantiq,xrx300-gphy" + "lantiq,xrx330-gphy" +- reg : Addrress of the GPHY FW load address register +- resets : Must reference the RCU GPHY reset bit +- reset-names : One entry, value must be "gphy" or optional "gphy2" +- clocks : A reference to the (PMU) GPHY clock gate + +Optional properties: +- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in + <dt-bindings/mips/lantiq_xway_gphy.h> + + +------------------------------------------------------------------------------- +Example for the GPHys on the xRX200 SoCs: + +#include <dt-bindings/mips/lantiq_rcu_gphy.h> + gphy0: gphy@20 { + compatible = "lantiq,xrx200a2x-gphy"; + reg = <0x20 0x4>; + + resets = <&reset0 31 30>, <&reset1 7 7>; + reset-names = "gphy", "gphy2"; + clocks = <&pmu0 XRX200_PMU_GATE_GPHY>; + lantiq,gphy-mode = <GPHY_MODE_GE>; + }; diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt new file mode 100644 index 000000000000..a086f1e1cdd7 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt @@ -0,0 +1,89 @@ +Lantiq XWAY SoC RCU binding +=========================== + +This binding describes the RCU (reset controller unit) multifunction device, +where each sub-device has it's own set of registers. + +The RCU register range is used for multiple purposes. Mostly one device +uses one or multiple register exclusively, but for some registers some +bits are for one driver and some other bits are for a different driver. +With this patch all accesses to the RCU registers will go through +syscon. + + +------------------------------------------------------------------------------- +Required properties: +- compatible : The first and second values must be: + "lantiq,xrx200-rcu", "simple-mfd", "syscon" +- reg : The address and length of the system control registers + + +------------------------------------------------------------------------------- +Example of the RCU bindings on a xRX200 SoC: + rcu0: rcu@203000 { + compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon"; + reg = <0x203000 0x100>; + ranges = <0x0 0x203000 0x100>; + big-endian; + + gphy0: gphy@20 { + compatible = "lantiq,xrx200a2x-gphy"; + reg = <0x20 0x4>; + + resets = <&reset0 31 30>, <&reset1 7 7>; + reset-names = "gphy", "gphy2"; + lantiq,gphy-mode = <GPHY_MODE_GE>; + }; + + gphy1: gphy@68 { + compatible = "lantiq,xrx200a2x-gphy"; + reg = <0x68 0x4>; + + resets = <&reset0 29 28>, <&reset1 6 6>; + reset-names = "gphy", "gphy2"; + lantiq,gphy-mode = <GPHY_MODE_GE>; + }; + + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg = <0x10 4>, <0x14 4>; + + #reset-cells = <2>; + }; + + reset1: reset-controller@48 { + compatible = "lantiq,xrx200-reset"; + reg = <0x48 4>, <0x24 4>; + + #reset-cells = <2>; + }; + + usb_phy0: usb2-phy@18 { + compatible = "lantiq,xrx200-usb2-phy"; + reg = <0x18 4>, <0x38 4>; + status = "disabled"; + + resets = <&reset1 4 4>, <&reset0 4 4>; + reset-names = "phy", "ctrl"; + #phy-cells = <0>; + }; + + usb_phy1: usb2-phy@34 { + compatible = "lantiq,xrx200-usb2-phy"; + reg = <0x34 4>, <0x3C 4>; + status = "disabled"; + + resets = <&reset1 5 4>, <&reset0 4 4>; + reset-names = "phy", "ctrl"; + #phy-cells = <0>; + }; + + reboot@10 { + compatible = "syscon-reboot"; + reg = <0x10 4>; + + regmap = <&rcu0>; + offset = <0x10>; + mask = <0x40000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/mips/ni.txt b/Documentation/devicetree/bindings/mips/ni.txt new file mode 100644 index 000000000000..722bf2d62da9 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/ni.txt @@ -0,0 +1,7 @@ +National Instruments MIPS platforms + +required root node properties: + - compatible: must be "ni,169445" + +CPU Nodes + - compatible: must be "mti,mips14KEc" diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt index b35a8d04f8b6..a16e8d7fe56c 100644 --- a/Documentation/devicetree/bindings/mips/ralink.txt +++ b/Documentation/devicetree/bindings/mips/ralink.txt @@ -15,3 +15,4 @@ value must be one of the following values: ralink,rt5350-soc ralink,mt7620a-soc ralink,mt7620n-soc + ralink,mt7628a-soc diff --git a/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt b/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt new file mode 100644 index 000000000000..643948b6b576 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt @@ -0,0 +1,40 @@ +Lantiq XWAY SoC RCU USB 1.1/2.0 PHY binding +=========================================== + +This binding describes the USB PHY hardware provided by the RCU module on the +Lantiq XWAY SoCs. + +This node has to be a sub node of the Lantiq RCU block. + +------------------------------------------------------------------------------- +Required properties (controller (parent) node): +- compatible : Should be one of + "lantiq,ase-usb2-phy" + "lantiq,danube-usb2-phy" + "lantiq,xrx100-usb2-phy" + "lantiq,xrx200-usb2-phy" + "lantiq,xrx300-usb2-phy" +- reg : Defines the following sets of registers in the parent + syscon device + - Offset of the USB PHY configuration register + - Offset of the USB Analog configuration + register (only for xrx200 and xrx200) +- clocks : References to the (PMU) "phy" clk gate. +- clock-names : Must be "phy" +- resets : References to the RCU USB configuration reset bits. +- reset-names : Must be one of the following: + "phy" (optional) + "ctrl" (shared) + +------------------------------------------------------------------------------- +Example for the USB PHYs on an xRX200 SoC: + usb_phy0: usb2-phy@18 { + compatible = "lantiq,xrx200-usb2-phy"; + reg = <0x18 4>, <0x38 4>; + + clocks = <&pmu PMU_GATE_USB0_PHY>; + clock-names = "phy"; + resets = <&reset1 4 4>, <&reset0 4 4>; + reset-names = "phy", "ctrl"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.txt b/Documentation/devicetree/bindings/reset/lantiq,reset.txt new file mode 100644 index 000000000000..c6aef36b7d15 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/lantiq,reset.txt @@ -0,0 +1,30 @@ +Lantiq XWAY SoC RCU reset controller binding +============================================ + +This binding describes a reset-controller found on the RCU module on Lantiq +XWAY SoCs. + +This node has to be a sub node of the Lantiq RCU block. + +------------------------------------------------------------------------------- +Required properties: +- compatible : Should be one of + "lantiq,danube-reset" + "lantiq,xrx200-reset" +- reg : Defines the following sets of registers in the parent + syscon device + - Offset of the reset set register + - Offset of the reset status register +- #reset-cells : Specifies the number of cells needed to encode the + reset line, should be 2. + The first cell takes the reset set bit and the + second cell takes the status bit. + +------------------------------------------------------------------------------- +Example for the reset-controllers on the xRX200 SoCs: + reset0: reset-controller@10 { + compatible = "lantiq,xrx200-reset"; + reg <0x10 0x04>, <0x14 0x04>; + + #reset-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 69183f0fbc78..1ea1fd4232ab 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -361,6 +361,7 @@ variscite Variscite Ltd. via VIA Technologies, Inc. virtio Virtual I/O Device Specification, developed by the OASIS consortium vivante Vivante Corporation +vocore VoCore Studio voipac Voipac Technologies s.r.o. wd Western Digital Corp. wetek WeTek Electronics, limited. diff --git a/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt new file mode 100644 index 000000000000..18d4d8302702 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt @@ -0,0 +1,24 @@ +Lantiq WTD watchdog binding +============================ + +This describes the binding of the Lantiq watchdog driver. + +------------------------------------------------------------------------------- +Required properties: +- compatible : Should be one of + "lantiq,wdt" + "lantiq,xrx100-wdt" + "lantiq,xrx200-wdt", "lantiq,xrx100-wdt" + "lantiq,falcon-wdt" +- reg : Address of the watchdog block +- lantiq,rcu : A phandle to the RCU syscon (required for + "lantiq,falcon-wdt" and "lantiq,xrx100-wdt") + +------------------------------------------------------------------------------- +Example for the watchdog on the xRX200 SoCs: + watchdog@803f0 { + compatible = "lantiq,xrx200-wdt", "lantiq,xrx100-wdt"; + reg = <0x803f0 0x10>; + + lantiq,rcu = <&rcu0>; + }; |
