diff options
Diffstat (limited to 'Documentation/sound/oss/MultiSound')
| -rw-r--r-- | Documentation/sound/oss/MultiSound | 1137 |
1 files changed, 0 insertions, 1137 deletions
diff --git a/Documentation/sound/oss/MultiSound b/Documentation/sound/oss/MultiSound deleted file mode 100644 index e4a18bb7f73a..000000000000 --- a/Documentation/sound/oss/MultiSound +++ /dev/null @@ -1,1137 +0,0 @@ -#! /bin/sh -# -# Turtle Beach MultiSound Driver Notes -# -- Andrew Veliath <andrewtv@usa.net> -# -# Last update: September 10, 1998 -# Corresponding msnd driver: 0.8.3 -# -# ** This file is a README (top part) and shell archive (bottom part). -# The corresponding archived utility sources can be unpacked by -# running `sh MultiSound' (the utilities are only needed for the -# Pinnacle and Fiji cards). ** -# -# -# -=-=- Getting Firmware -=-=- -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# See the section `Obtaining and Creating Firmware Files' in this -# document for instructions on obtaining the necessary firmware -# files. -# -# -# Supported Features -# ~~~~~~~~~~~~~~~~~~ -# -# Currently, full-duplex digital audio (/dev/dsp only, /dev/audio is -# not currently available) and mixer functionality (/dev/mixer) are -# supported (memory mapped digital audio is not yet supported). -# Digital transfers and monitoring can be done as well if you have -# the digital daughterboard (see the section on using the S/PDIF port -# for more information). -# -# Support for the Turtle Beach MultiSound Hurricane architecture is -# composed of the following modules (these can also operate compiled -# into the kernel): -# -# msnd - MultiSound base (requires soundcore) -# -# msnd_classic - Base audio/mixer support for Classic, Monetery and -# Tahiti cards -# -# msnd_pinnacle - Base audio/mixer support for Pinnacle and Fiji cards -# -# -# Important Notes - Read Before Using -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# The firmware files are not included (may change in future). You -# must obtain these images from Turtle Beach (they are included in -# the MultiSound Development Kits), and place them in /etc/sound for -# example, and give the full paths in the Linux configuration. If -# you are compiling in support for the MultiSound driver rather than -# using it as a module, these firmware files must be accessible -# during kernel compilation. -# -# Please note these files must be binary files, not assembler. See -# the section later in this document for instructions to obtain these -# files. -# -# -# Configuring Card Resources -# ~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# ** This section is very important, as your card may not work at all -# or your machine may crash if you do not do this correctly. ** -# -# * Classic/Monterey/Tahiti -# -# These cards are configured through the driver msnd_classic. You must -# know the io port, then the driver will select the irq and memory resources -# on the card. It is up to you to know if these are free locations or now, -# a conflict can lock the machine up. -# -# * Pinnacle/Fiji -# -# The Pinnacle and Fiji cards have an extra config port, either -# 0x250, 0x260 or 0x270. This port can be disabled to have the card -# configured strictly through PnP, however you lose the ability to -# access the IDE controller and joystick devices on this card when -# using PnP. The included pinnaclecfg program in this shell archive -# can be used to configure the card in non-PnP mode, and in PnP mode -# you can use isapnptools. These are described briefly here. -# -# pinnaclecfg is not required; you can use the msnd_pinnacle module -# to fully configure the card as well. However, pinnaclecfg can be -# used to change the resource values of a particular device after the -# msnd_pinnacle module has been loaded. If you are compiling the -# driver into the kernel, you must set these values during compile -# time, however other peripheral resource values can be changed with -# the pinnaclecfg program after the kernel is loaded. -# -# -# *** PnP mode -# -# Use pnpdump to obtain a sample configuration if you can; I was able -# to obtain one with the command `pnpdump 1 0x203' -- this may vary -# for you (running pnpdump by itself did not work for me). Then, -# edit this file and use isapnp to uncomment and set the card values. -# Use these values when inserting the msnd_pinnacle module. Using -# this method, you can set the resources for the DSP and the Kurzweil -# synth (Pinnacle). Since Linux does not directly support PnP -# devices, you may have difficulty when using the card in PnP mode -# when it the driver is compiled into the kernel. Using non-PnP mode -# is preferable in this case. -# -# Here is an example mypinnacle.conf for isapnp that sets the card to -# io base 0x210, irq 5 and mem 0xd8000, and also sets the Kurzweil -# synth to 0x330 and irq 9 (may need editing for your system): -# -# (READPORT 0x0203) -# (CSN 2) -# (IDENTIFY *) -# -# # DSP -# (CONFIGURE BVJ0440/-1 (LD 0 -# (INT 0 (IRQ 5 (MODE +E))) (IO 0 (BASE 0x0210)) (MEM 0 (BASE 0x0d8000)) -# (ACT Y))) -# -# # Kurzweil Synth (Pinnacle Only) -# (CONFIGURE BVJ0440/-1 (LD 1 -# (IO 0 (BASE 0x0330)) (INT 0 (IRQ 9 (MODE +E))) -# (ACT Y))) -# -# (WAITFORKEY) -# -# -# *** Non-PnP mode -# -# The second way is by running the card in non-PnP mode. This -# actually has some advantages in that you can access some other -# devices on the card, such as the joystick and IDE controller. To -# configure the card, unpack this shell archive and build the -# pinnaclecfg program. Using this program, you can assign the -# resource values to the card's devices, or disable the devices. As -# an alternative to using pinnaclecfg, you can specify many of the -# configuration values when loading the msnd_pinnacle module (or -# during kernel configuration when compiling the driver into the -# kernel). -# -# If you specify cfg=0x250 for the msnd_pinnacle module, it -# automatically configure the card to the given io, irq and memory -# values using that config port (the config port is jumper selectable -# on the card to 0x250, 0x260 or 0x270). -# -# See the `msnd_pinnacle Additional Options' section below for more -# information on these parameters (also, if you compile the driver -# directly into the kernel, these extra parameters can be useful -# here). -# -# -# ** It is very easy to cause problems in your machine if you choose a -# resource value which is incorrect. ** -# -# -# Examples -# ~~~~~~~~ -# -# * MultiSound Classic/Monterey/Tahiti: -# -# modprobe soundcore -# insmod msnd -# insmod msnd_classic io=0x290 irq=7 mem=0xd0000 -# -# * MultiSound Pinnacle in PnP mode: -# -# modprobe soundcore -# insmod msnd -# isapnp mypinnacle.conf -# insmod msnd_pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values -# -# * MultiSound Pinnacle in non-PnP mode (replace 0x250 with your configuration port, -# one of 0x250, 0x260 or 0x270): -# -# insmod soundcore -# insmod msnd -# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 -# -# * To use the MPU-compatible Kurzweil synth on the Pinnacle in PnP -# mode, add the following (assumes you did `isapnp mypinnacle.conf'): -# -# insmod sound -# insmod mpu401 io=0x330 irq=9 <-- match mypinnacle.conf values -# -# * To use the MPU-compatible Kurzweil synth on the Pinnacle in non-PnP -# mode, add the following. Note how we first configure the peripheral's -# resources, _then_ install a Linux driver for it: -# -# insmod sound -# pinnaclecfg 0x250 mpu 0x330 9 -# insmod mpu401 io=0x330 irq=9 -# -# -- OR you can use the following sequence without pinnaclecfg in non-PnP mode: -# -# insmod soundcore -# insmod msnd -# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9 -# insmod sound -# insmod mpu401 io=0x330 irq=9 -# -# * To setup the joystick port on the Pinnacle in non-PnP mode (though -# you have to find the actual Linux joystick driver elsewhere), you -# can use pinnaclecfg: -# -# pinnaclecfg 0x250 joystick 0x200 -# -# -- OR you can configure this using msnd_pinnacle with the following: -# -# insmod soundcore -# insmod msnd -# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200 -# -# -# msnd_classic, msnd_pinnacle Required Options -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# If the following options are not given, the module will not load. -# Examine the kernel message log for informative error messages. -# WARNING--probing isn't supported so try to make sure you have the -# correct shared memory area, otherwise you may experience problems. -# -# io I/O base of DSP, e.g. io=0x210 -# irq IRQ number, e.g. irq=5 -# mem Shared memory area, e.g. mem=0xd8000 -# -# -# msnd_classic, msnd_pinnacle Additional Options -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# fifosize The digital audio FIFOs, in kilobytes. If not -# specified, the default will be used. Increasing -# this value will reduce the chance of a FIFO -# underflow at the expense of increasing overall -# latency. For example, fifosize=512 will -# allocate 512kB read and write FIFOs (1MB total). -# While this may reduce dropouts, a heavy machine -# load will undoubtedly starve the FIFO of data -# and you will eventually get dropouts. One -# option is to alter the scheduling priority of -# the playback process, using `nice' or some form -# of POSIX soft real-time scheduling. -# -# calibrate_signal Setting this to one calibrates the ADCs to the -# signal, zero calibrates to the card (defaults -# to zero). -# -# -# msnd_pinnacle Additional Options -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# digital Specify digital=1 to enable the S/PDIF input -# if you have the digital daughterboard -# adapter. This will enable access to the -# DIGITAL1 input for the soundcard in the mixer. -# Some mixer programs might have trouble setting -# the DIGITAL1 source as an input. If you have -# trouble, you can try the setdigital.c program -# at the bottom of this document. -# -# cfg Non-PnP configuration port for the Pinnacle -# and Fiji (typically 0x250, 0x260 or 0x270, -# depending on the jumper configuration). If -# this option is omitted, then it is assumed -# that the card is in PnP mode, and that the -# specified DSP resource values are already -# configured with PnP (i.e. it won't attempt to -# do any sort of configuration). -# -# When the Pinnacle is in non-PnP mode, you can use the following -# options to configure particular devices. If a full specification -# for a device is not given, then the device is not configured. Note -# that you still must use a Linux driver for any of these devices -# once their resources are setup (such as the Linux joystick driver, -# or the MPU401 driver from OSS for the Kurzweil synth). -# -# mpu_io I/O port of MPU (on-board Kurzweil synth) -# mpu_irq IRQ of MPU (on-board Kurzweil synth) -# ide_io0 First I/O port of IDE controller -# ide_io1 Second I/O port of IDE controller -# ide_irq IRQ IDE controller -# joystick_io I/O port of joystick -# -# -# Obtaining and Creating Firmware Files -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# For the Classic/Tahiti/Monterey -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# Download to /tmp and unzip the following file from Turtle Beach: -# -# ftp://ftp.voyetra.com/pub/tbs/msndcl/msndvkit.zip -# -# When unzipped, unzip the file named MsndFiles.zip. Then copy the -# following firmware files to /etc/sound (note the file renaming): -# -# cp DSPCODE/MSNDINIT.BIN /etc/sound/msndinit.bin -# cp DSPCODE/MSNDPERM.REB /etc/sound/msndperm.bin -# -# When configuring the Linux kernel, specify /etc/sound/msndinit.bin and -# /etc/sound/msndperm.bin for the two firmware files (Linux kernel -# versions older than 2.2 do not ask for firmware paths, and are -# hardcoded to /etc/sound). -# -# If you are compiling the driver into the kernel, these files must -# be accessible during compilation, but will not be needed later. -# The files must remain, however, if the driver is used as a module. -# -# -# For the Pinnacle/Fiji -# ~~~~~~~~~~~~~~~~~~~~~ -# -# Download to /tmp and unzip the following file from Turtle Beach (be -# sure to use the entire URL; some have had trouble navigating to the -# URL): -# -# ftp://ftp.voyetra.com/pub/tbs/pinn/pnddk100.zip -# -# Unpack this shell archive, and run make in the created directory -# (you need a C compiler and flex to build the utilities). This -# should give you the executables conv, pinnaclecfg and setdigital. -# conv is only used temporarily here to create the firmware files, -# while pinnaclecfg is used to configure the Pinnacle or Fiji card in -# non-PnP mode, and setdigital can be used to set the S/PDIF input on -# the mixer (pinnaclecfg and setdigital should be copied to a -# convenient place, possibly run during system initialization). -# -# To generating the firmware files with the `conv' program, we create -# the binary firmware files by doing the following conversion -# (assuming the archive unpacked into a directory named PINNDDK): -# -# ./conv < PINNDDK/dspcode/pndspini.asm > /etc/sound/pndspini.bin -# ./conv < PINNDDK/dspcode/pndsperm.asm > /etc/sound/pndsperm.bin -# -# The conv (and conv.l) program is not needed after conversion and can -# be safely deleted. Then, when configuring the Linux kernel, specify -# /etc/sound/pndspini.bin and /etc/sound/pndsperm.bin for the two -# firmware files (Linux kernel versions older than 2.2 do not ask for -# firmware paths, and are hardcoded to /etc/sound). -# -# If you are compiling the driver into the kernel, these files must -# be accessible during compilation, but will not be needed later. -# The files must remain, however, if the driver is used as a module. -# -# -# Using Digital I/O with the S/PDIF Port -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# If you have a Pinnacle or Fiji with the digital daughterboard and -# want to set it as the input source, you can use this program if you -# have trouble trying to do it with a mixer program (be sure to -# insert the module with the digital=1 option, or say Y to the option -# during compiled-in kernel operation). Upon selection of the S/PDIF -# port, you should be able monitor and record from it. -# -# There is something to note about using the S/PDIF port. Digital -# timing is taken from the digital signal, so if a signal is not -# connected to the port and it is selected as recording input, you -# will find PCM playback to be distorted in playback rate. Also, -# attempting to record at a sampling rate other than the DAT rate may -# be problematic (i.e. trying to record at 8000Hz when the DAT signal -# is 44100Hz). If you have a problem with this, set the recording -# input to analog if you need to record at a rate other than that of -# the DAT rate. -# -# -# -- Shell archive attached below, just run `sh MultiSound' to extract. -# Contains Pinnacle/Fiji utilities to convert firmware, configure -# in non-PnP mode, and select the DIGITAL1 input for the mixer. -# -# -#!/bin/sh -# This is a shell archive (produced by GNU sharutils 4.2). -# To extract the files from this archive, save it to some FILE, remove -# everything before the `!/bin/sh' line above, then type `sh FILE'. -# -# Made on 1998-12-04 10:07 EST by <andrewtv@ztransform.velsoft.com>. -# Source directory was `/home/andrewtv/programming/pinnacle/pinnacle'. -# -# Existing files will *not* be overwritten unless `-c' is specified. -# -# This shar contains: -# length mode name -# ------ ---------- ------------------------------------------ -# 2046 -rw-rw-r-- MultiSound.d/setdigital.c -# 10235 -rw-rw-r-- MultiSound.d/pinnaclecfg.c -# 106 -rw-rw-r-- MultiSound.d/Makefile -# 141 -rw-rw-r-- MultiSound.d/conv.l -# 1472 -rw-rw-r-- MultiSound.d/msndreset.c -# -save_IFS="${IFS}" -IFS="${IFS}:" -gettext_dir=FAILED -locale_dir=FAILED -first_param="$1" -for dir in $PATH -do - if test "$gettext_dir" = FAILED && test -f $dir/gettext \ - && ($dir/gettext --version >/dev/null 2>&1) - then - set `$dir/gettext --version 2>&1` - if test "$3" = GNU - then - gettext_dir=$dir - fi - fi - if test "$locale_dir" = FAILED && test -f $dir/shar \ - && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) - then - locale_dir=`$dir/shar --print-text-domain-dir` - fi -done -IFS="$save_IFS" -if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED -then - echo=echo -else - TEXTDOMAINDIR=$locale_dir - export TEXTDOMAINDIR - TEXTDOMAIN=sharutils - export TEXTDOMAIN - echo="$gettext_dir/gettext -s" -fi -touch -am 1231235999 $$.touch >/dev/null 2>&1 -if test ! -f 1231235999 && test -f $$.touch; then - shar_touch=touch -else - shar_touch=: - echo - $echo 'WARNING: not restoring timestamps. Consider getting and' - $echo "installing GNU \`touch', distributed in GNU File Utilities..." - echo -fi -rm -f 1231235999 $$.touch -# -if mkdir _sh01426; then - $echo 'x -' 'creating lock directory' -else - $echo 'failed to create lock directory' - exit 1 -fi -# ============= MultiSound.d/setdigital.c ============== -if test ! -d 'MultiSound.d'; then - $echo 'x -' 'creating directory' 'MultiSound.d' - mkdir 'MultiSound.d' -fi -if test -f 'MultiSound.d/setdigital.c' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'MultiSound.d/setdigital.c' '(file already exists)' -else - $echo 'x -' extracting 'MultiSound.d/setdigital.c' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/setdigital.c' && -/********************************************************************* -X * -X * setdigital.c - sets the DIGITAL1 input for a mixer -X * -X * Copyright (C) 1998 Andrew Veliath -X * -X * This program is free software; you can redistribute it and/or modify -X * it under the terms of the GNU General Public License as published by -X * the Free Software Foundation; either version 2 of the License, or -X * (at your option) any later version. -X * -X * This program is distributed in the hope that it will be useful, -X * but WITHOUT ANY WARRANTY; without even the implied warranty of -X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -X * GNU General Public License for more details. -X * -X * You should have received a copy of the GNU General Public License -X * along with this program; if not, write to the Free Software -X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -X * -X ********************************************************************/ -X -#include <stdio.h> -#include <unistd.h> -#include <fcntl.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/ioctl.h> -#include <sys/soundcard.h> -X -int main(int argc, char *argv[]) -{ -X int fd; -X unsigned long recmask, recsrc; -X -X if (argc != 2) { -X fprintf(stderr, "usage: setdigital <mixer device>\n"); -X exit(1); -X } -X -X if ((fd = open(argv[1], O_RDWR)) < 0) { -X perror(argv[1]); -X exit(1); -X } -X -X if (ioctl(fd, SOUND_MIXER_READ_RECMASK, &recmask) < 0) { -X fprintf(stderr, "error: ioctl read recording mask failed\n"); -X perror("ioctl"); -X close(fd); -X exit(1); -X } -X -X if (!(recmask & SOUND_MASK_DIGITAL1)) { -X fprintf(stderr, "error: cannot find DIGITAL1 device in mixer\n"); -X close(fd); -X exit(1); -X } -X -X if (ioctl(fd, SOUND_MIXER_READ_RECSRC, &recsrc) < 0) { -X fprintf(stderr, "error: ioctl read recording source failed\n"); -X perror("ioctl"); -X close(fd); -X exit(1); -X } -X -X recsrc |= SOUND_MASK_DIGITAL1; -X -X if (ioctl(fd, SOUND_MIXER_WRITE_RECSRC, &recsrc) < 0) { -X fprintf(stderr, "error: ioctl write recording source failed\n"); -X perror("ioctl"); -X close(fd); -X exit(1); -X } -X -X close(fd); -X -X return 0; -} -SHAR_EOF - $shar_touch -am 1204092598 'MultiSound.d/setdigital.c' && - chmod 0664 'MultiSound.d/setdigital.c' || - $echo 'restore of' 'MultiSound.d/setdigital.c' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'MultiSound.d/setdigital.c:' 'MD5 check failed' -e87217fc3e71288102ba41fd81f71ec4 MultiSound.d/setdigital.c -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/setdigital.c'`" - test 2046 -eq "$shar_count" || - $echo 'MultiSound.d/setdigital.c:' 'original size' '2046,' 'current size' "$shar_count!" - fi -fi -# ============= MultiSound.d/pinnaclecfg.c ============== -if test -f 'MultiSound.d/pinnaclecfg.c' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'MultiSound.d/pinnaclecfg.c' '(file already exists)' -else - $echo 'x -' extracting 'MultiSound.d/pinnaclecfg.c' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/pinnaclecfg.c' && -/********************************************************************* -X * -X * pinnaclecfg.c - Pinnacle/Fiji Device Configuration Program -X * -X * This is for NON-PnP mode only. For PnP mode, use isapnptools. -X * -X * This is Linux-specific, and must be run with root permissions. -X * -X * Part of the Turtle Beach MultiSound Sound Card Driver for Linux -X * -X * Copyright (C) 1998 Andrew Veliath -X * -X * This program is free software; you can redistribute it and/or modify -X * it under the terms of the GNU General Public License as published by -X * the Free Software Foundation; either version 2 of the License, or -X * (at your option) any later version. -X * -X * This program is distributed in the hope that it will be useful, -X * but WITHOUT ANY WARRANTY; without even the implied warranty of -X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -X * GNU General Public License for more details. -X * -X * You should have received a copy of the GNU General Public License -X * along with this program; if not, write to the Free Software -X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -X * -X ********************************************************************/ -X -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <errno.h> -#include <unistd.h> -#include <asm/io.h> -#include <asm/types.h> -X -#define IREG_LOGDEVICE 0x07 -#define IREG_ACTIVATE 0x30 -#define LD_ACTIVATE 0x01 -#define LD_DISACTIVATE 0x00 -#define IREG_EECONTROL 0x3F -#define IREG_MEMBASEHI 0x40 -#define IREG_MEMBASELO 0x41 -#define IREG_MEMCONTROL 0x42 -#define IREG_MEMRANGEHI 0x43 -#define IREG_MEMRANGELO 0x44 -#define MEMTYPE_8BIT 0x00 -#define MEMTYPE_16BIT 0x02 -#define MEMTYPE_RANGE 0x00 -#define MEMTYPE_HIADDR 0x01 -#define IREG_IO0_BASEHI 0x60 -#define IREG_IO0_BASELO 0x61 -#define IREG_IO1_BASEHI 0x62 -#define IREG_IO1_BASELO 0x63 -#define IREG_IRQ_NUMBER 0x70 -#define IREG_IRQ_TYPE 0x71 -#define IRQTYPE_HIGH 0x02 -#define IRQTYPE_LOW 0x00 -#define IRQTYPE_LEVEL 0x01 -#define IRQTYPE_EDGE 0x00 -X -#define HIBYTE(w) ((BYTE)(((WORD)(w) >> 8) & 0xFF)) -#define LOBYTE(w) ((BYTE)(w)) -#define MAKEWORD(low,hi) ((WORD)(((BYTE)(low))|(((WORD)((BYTE)(hi)))<<8))) -X -typedef __u8 BYTE; -typedef __u16 USHORT; -typedef __u16 WORD; -X -static int config_port = -1; -X -static int msnd_write_cfg(int cfg, int reg, int value) -{ -X outb(reg, cfg); -X outb(value, cfg + 1); -X if (value != inb(cfg + 1)) { -X fprintf(stderr, "error: msnd_write_cfg: I/O error\n"); -X return -EIO; -X } -X return 0; -} -X -static int msnd_read_cfg(int cfg, int reg) -{ -X outb(reg, cfg); -X return inb(cfg + 1); -} -X -static int msnd_write_cfg_io0(int cfg, int num, WORD io) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IO0_BASEHI, HIBYTE(io))) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IO0_BASELO, LOBYTE(io))) -X return -EIO; -X return 0; -} -X -static int msnd_read_cfg_io0(int cfg, int num, WORD *io) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X -X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO0_BASELO), -X msnd_read_cfg(cfg, IREG_IO0_BASEHI)); -X -X return 0; -} -X -static int msnd_write_cfg_io1(int cfg, int num, WORD io) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IO1_BASEHI, HIBYTE(io))) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IO1_BASELO, LOBYTE(io))) -X return -EIO; -X return 0; -} -X -static int msnd_read_cfg_io1(int cfg, int num, WORD *io) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X -X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO1_BASELO), -X msnd_read_cfg(cfg, IREG_IO1_BASEHI)); -X -X return 0; -} -X -static int msnd_write_cfg_irq(int cfg, int num, WORD irq) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IRQ_NUMBER, LOBYTE(irq))) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_IRQ_TYPE, IRQTYPE_EDGE)) -X return -EIO; -X return 0; -} -X -static int msnd_read_cfg_irq(int cfg, int num, WORD *irq) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X -X *irq = msnd_read_cfg(cfg, IREG_IRQ_NUMBER); -X -X return 0; -} -X -static int msnd_write_cfg_mem(int cfg, int num, int mem) -{ -X WORD wmem; -X -X mem >>= 8; -X mem &= 0xfff; -X wmem = (WORD)mem; -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_MEMBASEHI, HIBYTE(wmem))) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_MEMBASELO, LOBYTE(wmem))) -X return -EIO; -X if (wmem && msnd_write_cfg(cfg, IREG_MEMCONTROL, (MEMTYPE_HIADDR | MEMTYPE_16BIT))) -X return -EIO; -X return 0; -} -X -static int msnd_read_cfg_mem(int cfg, int num, int *mem) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X -X *mem = MAKEWORD(msnd_read_cfg(cfg, IREG_MEMBASELO), -X msnd_read_cfg(cfg, IREG_MEMBASEHI)); -X *mem <<= 8; -X -X return 0; -} -X -static int msnd_activate_logical(int cfg, int num) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg(cfg, IREG_ACTIVATE, LD_ACTIVATE)) -X return -EIO; -X return 0; -} -X -static int msnd_write_cfg_logical(int cfg, int num, WORD io0, WORD io1, WORD irq, int mem) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_write_cfg_io0(cfg, num, io0)) -X return -EIO; -X if (msnd_write_cfg_io1(cfg, num, io1)) -X return -EIO; -X if (msnd_write_cfg_irq(cfg, num, irq)) -X return -EIO; -X if (msnd_write_cfg_mem(cfg, num, mem)) -X return -EIO; -X if (msnd_activate_logical(cfg, num)) -X return -EIO; -X return 0; -} -X -static int msnd_read_cfg_logical(int cfg, int num, WORD *io0, WORD *io1, WORD *irq, int *mem) -{ -X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) -X return -EIO; -X if (msnd_read_cfg_io0(cfg, num, io0)) -X return -EIO; -X if (msnd_read_cfg_io1(cfg, num, io1)) -X return -EIO; -X if (msnd_read_cfg_irq(cfg, num, irq)) -X return -EIO; -X if (msnd_read_cfg_mem(cfg, num, mem)) -X return -EIO; -X return 0; -} -X -static void usage(void) -{ -X fprintf(stderr, -X "\n" -X "pinnaclecfg 1.0\n" -X "\n" -X "usage: pinnaclecfg <config port> [device config]\n" -X "\n" -X "This is for use with the card in NON-PnP mode only.\n" -X "\n" -X "Available devices (not all available for Fiji):\n" -X "\n" -X " Device Description\n" -X " -------------------------------------------------------------------\n" -X " reset Reset all devices (i.e. disable)\n" -X " show Display current device configurations\n" -X "\n" -X " dsp <io> <irq> <mem> Audio device\n" -X " mpu <io> <irq> Internal Kurzweil synth\n" -X " ide <io0> <io1> <irq> On-board IDE controller\n" -X " joystick <io> Joystick port\n" -X "\n"); -X exit(1); -} -X -static int cfg_reset(void) -{ -X int i; -X -X for (i = 0; i < 4; ++i) -X msnd_write_cfg_logical(config_port, i, 0, 0, 0, 0); -X -X return 0; -} -X -static int cfg_show(void) -{ -X int i; -X int count = 0; -X -X for (i = 0; i < 4; ++i) { -X WORD io0, io1, irq; -X int mem; -X msnd_read_cfg_logical(config_port, i, &io0, &io1, &irq, &mem); -X switch (i) { -X case 0: -X if (io0 || irq || mem) { -X printf("dsp 0x%x %d 0x%x\n", io0, irq, mem); -X ++count; -X } -X break; -X case 1: -X if (io0 || irq) { -X printf("mpu 0x%x %d\n", io0, irq); -X ++count; -X } -X break; -X case 2: -X if (io0 || io1 || irq) { -X printf("ide 0x%x 0x%x %d\n", io0, io1, irq); -X ++count; -X } -X break; -X case 3: -X if (io0) { -X printf("joystick 0x%x\n", io0); -X ++count; -X } -X break; -X } -X } -X -X if (count == 0) -X fprintf(stderr, "no devices configured\n"); -X -X return 0; -} -X -static int cfg_dsp(int argc, char *argv[]) -{ -X int io, irq, mem; -X -X if (argc < 3 || -X sscanf(argv[0], "0x%x", &io) != 1 || -X sscanf(argv[1], "%d", &irq) != 1 || -X sscanf(argv[2], "0x%x", &mem) != 1) -X usage(); -X -X if (!(io == 0x290 || -X io == 0x260 || -X io == 0x250 || -X io == 0x240 || -X io == 0x230 || -X io == 0x220 || -X io == 0x210 || -X io == 0x3e0)) { -X fprintf(stderr, "error: io must be one of " -X "210, 220, 230, 240, 250, 260, 290, or 3E0\n"); -X usage(); -X } -X -X if (!(irq == 5 || -X irq == 7 || -X irq == 9 || -X irq == 10 || -X irq == 11 || -X irq == 12)) { -X fprintf(stderr, "error: irq must be one of " -X "5, 7, 9, 10, 11 or 12\n"); -X usage(); -X } -X -X if (!(mem == 0xb0000 || -X mem == 0xc8000 || -X mem == 0xd0000 || -X mem == 0xd8000 || -X mem == 0xe0000 || -X mem == 0xe8000)) { -X fprintf(stderr, "error: mem must be one of " -X "0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000\n"); -X usage(); -X } -X -X return msnd_write_cfg_logical(config_port, 0, io, 0, irq, mem); -} -X -static int cfg_mpu(int argc, char *argv[]) -{ -X int io, irq; -X -X if (argc < 2 || -X sscanf(argv[0], "0x%x", &io) != 1 || -X sscanf(argv[1], "%d", &irq) != 1) -X usage(); -X -X return msnd_write_cfg_logical(config_port, 1, io, 0, irq, 0); -} -X -static int cfg_ide(int argc, char *argv[]) -{ -X int io0, io1, irq; -X -X if (argc < 3 || -X sscanf(argv[0], "0x%x", &io0) != 1 || -X sscanf(argv[0], "0x%x", &io1) != 1 || -X sscanf(argv[1], "%d", &irq) != 1) -X usage(); -X -X return msnd_write_cfg_logical(config_port, 2, io0, io1, irq, 0); -} -X -static int cfg_joystick(int argc, char *argv[]) -{ -X int io; -X -X if (argc < 1 || -X sscanf(argv[0], "0x%x", &io) != 1) -X usage(); -X -X return msnd_write_cfg_logical(config_port, 3, io, 0, 0, 0); -} -X -int main(int argc, char *argv[]) -{ -X char *device; -X int rv = 0; -X -X --argc; ++argv; -X -X if (argc < 2) -X usage(); -X -X sscanf(argv[0], "0x%x", &config_port); -X if (config_port != 0x250 && config_port != 0x260 && config_port != 0x270) { -X fprintf(stderr, "error: <config port> must be 0x250, 0x260 or 0x270\n"); -X exit(1); -X } -X if (ioperm(config_port, 2, 1)) { -X perror("ioperm"); -X fprintf(stderr, "note: pinnaclecfg must be run as root\n"); -X exit(1); -X } -X device = argv[1]; -X -X argc -= 2; argv += 2; -X -X if (strcmp(device, "reset") == 0) -X rv = cfg_reset(); -X else if (strcmp(device, "show") == 0) -X rv = cfg_show(); -X else if (strcmp(device, "dsp") == 0) -X rv = cfg_dsp(argc, argv); -X else if (strcmp(device, "mpu") == 0) -X rv = cfg_mpu(argc, argv); -X else if (strcmp(device, "ide") == 0) -X rv = cfg_ide(argc, argv); -X else if (strcmp(device, "joystick") == 0) -X rv = cfg_joystick(argc, argv); -X else { -X fprintf(stderr, "error: unknown device %s\n", device); -X usage(); -X } -X -X if (rv) -X fprintf(stderr, "error: device configuration failed\n"); -X -X return 0; -} -SHAR_EOF - $shar_touch -am 1204092598 'MultiSound.d/pinnaclecfg.c' && - chmod 0664 'MultiSound.d/pinnaclecfg.c' || - $echo 'restore of' 'MultiSound.d/pinnaclecfg.c' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'MultiSound.d/pinnaclecfg.c:' 'MD5 check failed' -366bdf27f0db767a3c7921d0a6db20fe MultiSound.d/pinnaclecfg.c -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/pinnaclecfg.c'`" - test 10235 -eq "$shar_count" || - $echo 'MultiSound.d/pinnaclecfg.c:' 'original size' '10235,' 'current size' "$shar_count!" - fi -fi -# ============= MultiSound.d/Makefile ============== -if test -f 'MultiSound.d/Makefile' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'MultiSound.d/Makefile' '(file already exists)' -else - $echo 'x -' extracting 'MultiSound.d/Makefile' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/Makefile' && -CC = gcc -CFLAGS = -O -PROGS = setdigital msndreset pinnaclecfg conv -X -all: $(PROGS) -X -clean: -X rm -f $(PROGS) -SHAR_EOF - $shar_touch -am 1204092398 'MultiSound.d/Makefile' && - chmod 0664 'MultiSound.d/Makefile' || - $echo 'restore of' 'MultiSound.d/Makefile' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'MultiSound.d/Makefile:' 'MD5 check failed' -76ca8bb44e3882edcf79c97df6c81845 MultiSound.d/Makefile -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/Makefile'`" - test 106 -eq "$shar_count" || - $echo 'MultiSound.d/Makefile:' 'original size' '106,' 'current size' "$shar_count!" - fi -fi -# ============= MultiSound.d/conv.l ============== -if test -f 'MultiSound.d/conv.l' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'MultiSound.d/conv.l' '(file already exists)' -else - $echo 'x -' extracting 'MultiSound.d/conv.l' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/conv.l' && -%% -[ \n\t,\r] -\;.* -DB -[0-9A-Fa-f]+H { int n; sscanf(yytext, "%xH", &n); printf("%c", n); } -%% -int yywrap() { return 1; } -main() { yylex(); } -SHAR_EOF - $shar_touch -am 0828231798 'MultiSound.d/conv.l' && - chmod 0664 'MultiSound.d/conv.l' || - $echo 'restore of' 'MultiSound.d/conv.l' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'MultiSound.d/conv.l:' 'MD5 check failed' -d2411fc32cd71a00dcdc1f009e858dd2 MultiSound.d/conv.l -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/conv.l'`" - test 141 -eq "$shar_count" || - $echo 'MultiSound.d/conv.l:' 'original size' '141,' 'current size' "$shar_count!" - fi -fi -# ============= MultiSound.d/msndreset.c ============== -if test -f 'MultiSound.d/msndreset.c' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'MultiSound.d/msndreset.c' '(file already exists)' -else - $echo 'x -' extracting 'MultiSound.d/msndreset.c' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/msndreset.c' && -/********************************************************************* -X * -X * msndreset.c - resets the MultiSound card -X * -X * Copyright (C) 1998 Andrew Veliath -X * -X * This program is free software; you can redistribute it and/or modify -X * it under the terms of the GNU General Public License as published by -X * the Free Software Foundation; either version 2 of the License, or -X * (at your option) any later version. -X * -X * This program is distributed in the hope that it will be useful, -X * but WITHOUT ANY WARRANTY; without even the implied warranty of -X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -X * GNU General Public License for more details. -X * -X * You should have received a copy of the GNU General Public License -X * along with this program; if not, write to the Free Software -X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -X * -X ********************************************************************/ -X -#include <stdio.h> -#include <unistd.h> -#include <fcntl.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/ioctl.h> -#include <sys/soundcard.h> -X -int main(int argc, char *argv[]) -{ -X int fd; -X -X if (argc != 2) { -X fprintf(stderr, "usage: msndreset <mixer device>\n"); -X exit(1); -X } -X -X if ((fd = open(argv[1], O_RDWR)) < 0) { -X perror(argv[1]); -X exit(1); -X } -X -X if (ioctl(fd, SOUND_MIXER_PRIVATE1, 0) < 0) { -X fprintf(stderr, "error: msnd ioctl reset failed\n"); -X perror("ioctl"); -X close(fd); -X exit(1); -X } -X -X close(fd); -X -X return 0; -} -SHAR_EOF - $shar_touch -am 1204100698 'MultiSound.d/msndreset.c' && - chmod 0664 'MultiSound.d/msndreset.c' || - $echo 'restore of' 'MultiSound.d/msndreset.c' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'MultiSound.d/msndreset.c:' 'MD5 check failed' -c52f876521084e8eb25e12e01dcccb8a MultiSound.d/msndreset.c -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/msndreset.c'`" - test 1472 -eq "$shar_count" || - $echo 'MultiSound.d/msndreset.c:' 'original size' '1472,' 'current size' "$shar_count!" - fi -fi -rm -fr _sh01426 -exit 0 |
