diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt | 121 |
1 files changed, 0 insertions, 121 deletions
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt deleted file mode 100644 index be40a780501c..000000000000 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt +++ /dev/null @@ -1,121 +0,0 @@ -Amlogic Meson Display Controller -================================ - -The Amlogic Meson Display controller is composed of several components -that are going to be documented below: - -DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| - | vd1 _______ _____________ _________________ | | -D |-------| |----| | | | | HDMI PLL | -D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | -R |-------| |----| Processing | | | | | - | osd2 | | | |---| Enci ----------|----|-----VDAC------| -R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| -A | osd1 | | | Blenders | | Encl ----------|----|---------------| -M |-------|______|----|____________| |________________| | | -___|__________________________________________________________|_______________| - - -VIU: Video Input Unit ---------------------- - -The Video Input Unit is in charge of the pixel scanout from the DDR memory. -It fetches the frames addresses, stride and parameters from the "Canvas" memory. -This part is also in charge of the CSC (Colorspace Conversion). -It can handle 2 OSD Planes and 2 Video Planes. - -VPP: Video Post Processing --------------------------- - -The Video Post Processing is in charge of the scaling and blending of the -various planes into a single pixel stream. -There is a special "pre-blending" used by the video planes with a dedicated -scaler and a "post-blending" to merge with the OSD Planes. -The OSD planes also have a dedicated scaler for one of the OSD. - -VENC: Video Encoders --------------------- - -The VENC is composed of the multiple pixel encoders : - - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - - ENCP : Progressive Video Encoder for HDMI - - ENCL : LCD LVDS Encoder -The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock -tree and provides the scanout clock to the VPP and VIU. -The ENCI is connected to a single VDAC for Composite Output. -The ENCI and ENCP are connected to an on-chip HDMI Transceiver. - -Device Tree Bindings: ---------------------- - -VPU: Video Processing Unit --------------------------- - -Required properties: -- compatible: value should be different for each SoC family as : - - GXBB (S905) : "amlogic,meson-gxbb-vpu" - - GXL (S905X, S905D) : "amlogic,meson-gxl-vpu" - - GXM (S912) : "amlogic,meson-gxm-vpu" - followed by the common "amlogic,meson-gx-vpu" - - G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-vpu" -- reg: base address and size of he following memory-mapped regions : - - vpu - - hhi -- reg-names: should contain the names of the previous memory regions -- interrupts: should contain the VENC Vsync interrupt number -- amlogic,canvas: phandle to canvas provider node as described in the file - ../soc/amlogic/amlogic,canvas.txt - -Optional properties: -- power-domains: Optional phandle to associated power domain as described in - the file ../power/power_domain.txt - -Required nodes: - -The connections to the VPU output video ports are modeled using the OF graph -bindings specified in Documentation/devicetree/bindings/graph.txt. - -The following table lists for each supported model the port number -corresponding to each VPU output. - - Port 0 Port 1 ------------------------------------------ - S905 (GXBB) CVBS VDAC HDMI-TX - S905X (GXL) CVBS VDAC HDMI-TX - S905D (GXL) CVBS VDAC HDMI-TX - S912 (GXM) CVBS VDAC HDMI-TX - S905X2 (G12A) CVBS VDAC HDMI-TX - S905Y2 (G12A) CVBS VDAC HDMI-TX - S905D2 (G12A) CVBS VDAC HDMI-TX - -Example: - -tv-connector { - compatible = "composite-video-connector"; - - port { - tv_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; -}; - -vpu: vpu@d0100000 { - compatible = "amlogic,meson-gxbb-vpu"; - reg = <0x0 0xd0100000 0x0 0x100000>, - <0x0 0xc883c000 0x0 0x1000>, - <0x0 0xc8838000 0x0 0x1000>; - reg-names = "vpu", "hhi", "dmc"; - interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - - /* CVBS VDAC output port */ - port@0 { - reg = <0>; - - cvbs_vdac_out: endpoint { - remote-endpoint = <&tv_connector_in>; - }; - }; -}; |
