diff options
| -rw-r--r-- | Documentation/device-mapper/dm-log.txt | 54 | ||||
| -rw-r--r-- | drivers/md/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/md/Makefile | 3 | ||||
| -rw-r--r-- | drivers/md/dm-log-userspace-base.c | 696 | ||||
| -rw-r--r-- | drivers/md/dm-log-userspace-transfer.c | 276 | ||||
| -rw-r--r-- | drivers/md/dm-log-userspace-transfer.h | 18 | ||||
| -rw-r--r-- | include/linux/Kbuild | 1 | ||||
| -rw-r--r-- | include/linux/connector.h | 4 | ||||
| -rw-r--r-- | include/linux/dm-log-userspace.h | 386 |
9 files changed, 1448 insertions, 1 deletions
diff --git a/Documentation/device-mapper/dm-log.txt b/Documentation/device-mapper/dm-log.txt new file mode 100644 index 000000000000..994dd75475a6 --- /dev/null +++ b/Documentation/device-mapper/dm-log.txt @@ -0,0 +1,54 @@ +Device-Mapper Logging +===================== +The device-mapper logging code is used by some of the device-mapper +RAID targets to track regions of the disk that are not consistent. +A region (or portion of the address space) of the disk may be +inconsistent because a RAID stripe is currently being operated on or +a machine died while the region was being altered. In the case of +mirrors, a region would be considered dirty/inconsistent while you +are writing to it because the writes need to be replicated for all +the legs of the mirror and may not reach the legs at the same time. +Once all writes are complete, the region is considered clean again. + +There is a generic logging interface that the device-mapper RAID +implementations use to perform logging operations (see +dm_dirty_log_type in include/linux/dm-dirty-log.h). Various different +logging implementations are available and provide different +capabilities. The list includes: + +Type Files +==== ===== +disk drivers/md/dm-log.c +core drivers/md/dm-log.c +userspace drivers/md/dm-log-userspace* include/linux/dm-log-userspace.h + +The "disk" log type +------------------- +This log implementation commits the log state to disk. This way, the +logging state survives reboots/crashes. + +The "core" log type +------------------- +This log implementation keeps the log state in memory. The log state +will not survive a reboot or crash, but there may be a small boost in +performance. This method can also be used if no storage device is +available for storing log state. + +The "userspace" log type +------------------------ +This log type simply provides a way to export the log API to userspace, +so log implementations can be done there. This is done by forwarding most +logging requests to userspace, where a daemon receives and processes the +request. + +The structure used for communication between kernel and userspace are +located in include/linux/dm-log-userspace.h. Due to the frequency, +diversity, and 2-way communication nature of the exchanges between +kernel and userspace, 'connector' is used as the interface for +communication. + +There are currently two userspace log implementations that leverage this +framework - "clustered_disk" and "clustered_core". These implementations +provide a cluster-coherent log for shared-storage. Device-mapper mirroring +can be used in a shared-storage environment when the cluster log implementations +are employed. diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 09f93fa68912..020f9573fd82 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -231,6 +231,17 @@ config DM_MIRROR Allow volume managers to mirror logical volumes, also needed for live data migration tools such as 'pvmove'. +config DM_LOG_USERSPACE + tristate "Mirror userspace logging (EXPERIMENTAL)" + depends on DM_MIRROR && EXPERIMENTAL && NET + select CONNECTOR + ---help--- + The userspace logging module provides a mechanism for + relaying the dm-dirty-log API to userspace. Log designs + which are more suited to userspace implementation (e.g. + shared storage logs) or experimental logs can be implemented + by leveraging this framework. + config DM_ZERO tristate "Zero target" depends on BLK_DEV_DM diff --git a/drivers/md/Makefile b/drivers/md/Makefile index dade52f60733..1dc4185bd781 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -8,6 +8,8 @@ dm-multipath-y += dm-path-selector.o dm-mpath.o dm-snapshot-y += dm-snap.o dm-exception-store.o dm-snap-transient.o \ dm-snap-persistent.o dm-mirror-y += dm-raid1.o +dm-log-userspace-y \ + += dm-log-userspace-base.o dm-log-userspace-transfer.o md-mod-y += md.o bitmap.o raid456-y += raid5.o raid6_pq-y += raid6algos.o raid6recov.o raid6tables.o \ @@ -40,6 +42,7 @@ obj-$(CONFIG_DM_MULTIPATH_QL) += dm-queue-length.o obj-$(CONFIG_DM_MULTIPATH_ST) += dm-service-time.o obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o +obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o obj-$(CONFIG_DM_ZERO) += dm-zero.o quiet_cmd_unroll = UNROLL $@ diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c new file mode 100644 index 000000000000..e69b96560997 --- /dev/null +++ b/drivers/md/dm-log-userspace-base.c @@ -0,0 +1,696 @@ +/* + * Copyright (C) 2006-2009 Red Hat, Inc. + * + * This file is released under the LGPL. + */ + +#include <linux/bio.h> +#include <linux/dm-dirty-log.h> +#include <linux/device-mapper.h> +#include <linux/dm-log-userspace.h> + +#include "dm-log-userspace-transfer.h" + +struct flush_entry { + int type; + region_t region; + struct list_head list; +}; + +struct log_c { + struct dm_target *ti; + uint32_t region_size; + region_t region_count; + char uuid[DM_UUID_LEN]; + + char *usr_argv_str; + uint32_t usr_argc; + + /* + * in_sync_hint gets set when doing is_remote_recovering. It + * represents the first region that needs recovery. IOW, the + * first zero bit of sync_bits. This can be useful for to limit + * traffic for calls like is_remote_recovering and get_resync_work, + * but be take care in its use for anything else. + */ + uint64_t in_sync_hint; + + spinlock_t flush_lock; + struct list_head flush_list; /* only for clear and mark requests */ +}; + +static mempool_t *flush_entry_pool; + +static void *flush_entry_alloc(gfp_t gfp_mask, void *pool_data) +{ + return kmalloc(sizeof(struct flush_entry), gfp_mask); +} + +static void flush_entry_free(void *element, void *pool_data) +{ + kfree(element); +} + +static int userspace_do_request(struct log_c *lc, const char *uuid, + int request_type, char *data, size_t data_size, + char *rdata, size_t *rdata_size) +{ + int r; + + /* + * If the server isn't there, -ESRCH is returned, + * and we must keep trying until the server is + * restored. + */ +retry: + r = dm_consult_userspace(uuid, request_type, data, + data_size, rdata, rdata_size); + + if (r != -ESRCH) + return r; + + DMERR(" Userspace log server not found."); + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(2*HZ); + DMWARN("Attempting to contact userspace log server..."); + r = dm_consult_userspace(uuid, DM_ULOG_CTR, lc->usr_argv_str, + strlen(lc->usr_argv_str) + 1, + NULL, NULL); + if (!r) + break; + } + DMINFO("Reconnected to userspace log server... DM_ULOG_CTR complete"); + r = dm_consult_userspace(uuid, DM_ULOG_RESUME, NULL, + 0, NULL, NULL); + if (!r) + goto retry; + + DMERR("Error trying to resume userspace log: %d", r); + + return -ESRCH; +} + +static int build_constructor_string(struct dm_target *ti, + unsigned argc, char **argv, + char **ctr_str) +{ + int i, str_size; + char *str = NULL; + + *ctr_str = NULL; + + for (i = 0, str_size = 0; i < argc; i++) + str_size += strlen(argv[i]) + 1; /* +1 for space between args */ + + str_size += 20; /* Max number of chars in a printed u64 number */ + + str = kzalloc(str_size, GFP_KERNEL); + if (!str) { + DMWARN("Unable to allocate memory for constructor string"); + return -ENOMEM; + } + + for (i = 0, str_size = 0; i < argc; i++) + str_size += sprintf(str + str_size, "%s ", argv[i]); + str_size += sprintf(str + str_size, "%llu", + (unsigned long long)ti->len); + + *ctr_str = str; + return str_size; +} + +/* + * userspace_ctr + * + * argv contains: + * <UUID> <other args> + * Where 'other args' is the userspace implementation specific log + * arguments. An example might be: + * <UUID> clustered_disk <arg count> <log dev> <region_size> [[no]sync] + * + * So, this module will strip off the <UUID> for identification purposes + * when communicating with userspace about a log; but will pass on everything + * else. + */ +static int userspace_ctr(struct dm_dirty_log *log, struct dm_target *ti, + unsigned argc, char **argv) +{ + int r = 0; + int str_size; + char *ctr_str = NULL; + struct log_c *lc = NULL; + uint64_t rdata; + size_t rdata_size = sizeof(rdata); + + if (argc < 3) { + DMWARN("Too few arguments to userspace dirty log"); + return -EINVAL; + } + + lc = kmalloc(sizeof(*lc), GFP_KERNEL); + if (!lc) { + DMWARN("Unable to allocate userspace log context."); + return -ENOMEM; + } + + lc->ti = ti; + + if (strlen(argv[0]) > (DM_UUID_LEN - 1)) { + DMWARN("UUID argument too long."); + kfree(lc); + return -EINVAL; + } + + strncpy(lc->uuid, argv[0], DM_UUID_LEN); + spin_lock_init(&lc->flush_lock); + INIT_LIST_HEAD(&lc->flush_list); + + str_size = build_constructor_string(ti, argc - 1, argv + 1, &ctr_str); + if (str_size < 0) { + kfree(lc); + return str_size; + } + + /* Send table string */ + r = dm_consult_userspace(lc->uuid, DM_ULOG_CTR, + ctr_str, str_size, NULL, NULL); + + if (r == -ESRCH) { + DMERR("Userspace log server not found"); + goto out; + } + + /* Since the region size does not change, get it now */ + rdata_size = sizeof(rdata); + r = dm_consult_userspace(lc->uuid, DM_ULOG_GET_REGION_SIZE, + NULL, 0, (char *)&rdata, &rdata_size); + + if (r) { + DMERR("Failed to get region size of dirty log"); + goto out; + } + + lc->region_size = (uint32_t)rdata; + lc->region_count = dm_sector_div_up(ti->len, lc->region_size); + +out: + if (r) { + kfree(lc); + kfree(ctr_str); + } else { + lc->usr_argv_str = ctr_str; + lc->usr_argc = argc; + log->context = lc; + } + + return r; +} + +static void userspace_dtr(struct dm_dirty_log *log) +{ + int r; + struct log_c *lc = log->context; + + r = dm_consult_userspace(lc->uuid, DM_ULOG_DTR, + NULL, 0, + NULL, NULL); + + kfree(lc->usr_argv_str); + kfree(lc); + + return; +} + +static int userspace_presuspend(struct dm_dirty_log *log) +{ + int r; + struct log_c *lc = log->context; + + r = dm_consult_userspace(lc->uuid, DM_ULOG_PRESUSPEND, + NULL, 0, + NULL, NULL); + + return r; +} + +static int userspace_postsuspend(struct dm_dirty_log *log) +{ + int r; + struct log_c *lc = log->context; + + r = dm_consult_userspace(lc->uuid, DM_ULOG_POSTSUSPEND, + NULL, 0, + NULL, NULL); + + return r; +} + +static int userspace_resume(struct dm_dirty_log *log) +{ + int r; + struct log_c *lc = log->context; + + lc->in_sync_hint = 0; + r = dm_consult_userspace(lc->uuid, DM_ULOG_RESUME, + NULL, 0, + NULL, NULL); + + return r; +} + +static uint32_t userspace_get_region_size(struct dm_dirty_log *log) +{ + struct log_c *lc = log->context; + + return lc->region_size; +} + +/* + * userspace_is_clean + * + * Check whether a region is clean. If there is any sort of + * failure when consulting the server, we return not clean. + * + * Returns: 1 if clean, 0 otherwise + */ +static int userspace_is_clean(struct dm_dirty_log *log, region_t region) +{ + int r; + uint64_t region64 = (uint64_t)region; + int64_t is_clean; + size_t rdata_size; + struct log_c *lc = log->context; + + rdata_size = sizeof(is_clean); + r = userspace_do_request(lc, lc->uuid, DM_ULOG_IS_CLEAN, + (char *)®ion64, sizeof(region64), + (char *)&is_clean, &rdata_size); + + return (r) ? 0 : (int)is_clean; +} + +/* + * userspace_in_sync + * + * Check if the region is in-sync. If there is any sort + * of failure when consulting the server, we assume that + * the region is not in sync. + * + * If 'can_block' is set, return immediately + * + * Returns: 1 if in-sync, 0 if not-in-sync, -EWOULDBLOCK + */ +static int userspace_in_sync(struct dm_dirty_log *log, region_t region, + int can_block) +{ + int r; + uint64_t region64 = region; + int64_t in_sync; + size_t rdata_size; + struct log_c *lc = log->context; + + /* + * We can never respond directly - even if in_sync_hint is + * set. This is because another machine could see a device + * failure and mark the region out-of-sync. If we don't go + * to userspace to ask, we might think the region is in-sync + * and allow a read to pick up data that is stale. (This is + * very unlikely if a device actually fails; but it is very + * likely if a connection to one device from one machine fails.) + * + * There still might be a problem if the mirror caches the region + * state as in-sync... but then this call would not be made. So, + * that is a mirror problem. + */ + if (!can_block) + return -EWOULDBLOCK; + + rdata_size = sizeof(in_sync); + r = userspace_do_request(lc, lc->uuid, DM_ULOG_IN_SYNC, + (char *)®ion64, sizeof(region64), + (char *)&in_sync, &rdata_size); + return (r) ? 0 : (int)in_sync; +} + +/* + * userspace_flush + * + * This function is ok to block. + * The flush happens in two stages. First, it sends all + * clear/mark requests that are on the list. Then it + * tells the server to commit them. This gives the + * server a chance to optimise the commit, instead of + * doing it for every request. + * + * Additionally, we could implement another thread that + * sends the requests up to the server - reducing the + * load on flush. Then the flush would have less in + * the list and be responsible for the finishing commit. + * + * Returns: 0 on success, < 0 on failure + */ +static int userspace_flush(struct dm_dirty_log *log) +{ + int r = 0; + unsigned long flags; + struct log_c *lc = log->context; + LIST_HEAD(flush_list); + struct flush_entry *fe, *tmp_fe; + + spin_lock_irqsave(&lc->flush_lock, flags); + list_splice_init(&lc->flush_list, &flush_list); + spin_unlock_irqrestore(&lc->flush_lock, flags); + + if (list_empty(&flush_list)) + return 0; + + /* + * FIXME: Count up requests, group request types, + * allocate memory to stick all requests in and + * send to server in one go. Failing the allocation, + * do it one by one. + */ + + list_for_each_entry(fe, &flush_list, list) { + r = userspace_do_request(lc, lc->uuid, fe->type, + (char *)&fe->region, + sizeof(fe->region), + NULL, NULL); + if (r) + goto fail; + } + + r = userspace_do_request(lc, lc->uuid, DM_ULOG_FLUSH, + NULL, 0, NULL, NULL); + +fail: + /* + * We can safely remove these entries, even if failure. + * Calling code will receive an error and will know that + * the log facility has failed. + */ + list_for_each_entry_safe(fe, tmp_fe, &flush_list, list) { + list_del(&fe->list); + mempool_free(fe, flush_entry_pool); + } + + if (r) + dm_table_event(lc->ti->table); + + return r; +} + +/* + * userspace_mark_region + * + * This function should avoid blocking unless absolutely required. + * (Memory allocation is valid for blocking.) + */ +static void userspace_mark_region(struct dm_dirty_log *log, region_t region) +{ + unsigned long flags; + struct log_c *lc = log->context; + struct flush_entry *fe; + + /* Wait for an allocation, but _never_ fail */ + fe = mempool_alloc(flush_entry_pool, GFP_NOIO); + BUG_ON(!fe); + + spin_lock_irqsave(&lc->flush_lock, flags); + fe->type = DM_ULOG_MARK_REGION; + fe->region = region; + list_add(&fe->list, &lc->flush_list); + spin_unlock_irqrestore(&lc->flush_lock, flags); + + return; +} + +/* + * userspace_clear_region + * + * This function must not block. + * So, the alloc can't block. In the worst case, it is ok to + * fail. It would simply mean we can't clear the region. + * Does nothing to current sync context, but does mean + * the region will be re-sync'ed on a reload of the mirror + * even though it is in-sync. + */ +static void userspace_clear_region(struct dm_dirty_log *log, region_t region) +{ + unsigned long flags; + struct log_c *lc = log->context; + struct flush_entry *fe; + + /* + * If we fail to allocate, we skip the clearing of + * the region. This doesn't hurt us in any way, except + * to cause the region to be resync'ed when the + * device is activated next time. + */ + fe = mempool_alloc(flush_entry_pool, GFP_ATOMIC); + if (!fe) { + DMERR("Failed to allocate memory to clear region."); + return; + } + + spin_lock_irqsave(&lc->flush_lock, flags); + fe->type = DM_ULOG_CLEAR_REGION; + fe->region = region; + list_add(&fe->list, &lc->flush_list); + spin_unlock_irqrestore(&lc->flush_lock, flags); + + return; +} + +/* + * userspace_get_resync_work + * + * Get a region that needs recovery. It is valid to return + * an error for this function. + * + * Returns: 1 if region filled, 0 if no work, <0 on error + */ +static int userspace_get_resync_work(struct dm_dirty_log *log, region_t *region) +{ + int r; + size_t rdata_size; + struct log_c *lc = log->context; + struct { + int64_t i; /* 64-bit for mix arch compatibility */ + region_t r; + } pkg; + + if (lc->in_sync_hint >= lc->region_count) + return 0; + + rdata_size = sizeof(pkg); + r = userspace_do_request(lc, lc->uuid, DM_ULOG_GET_RESYNC_WORK, + NULL, 0, + (char *)&pkg, &rdata_size); + + *region = pkg.r; + return (r) ? r : (int)pkg.i; +} + +/* + * userspace_set_region_sync + * + * Set the sync status of a given region. This function + * must not fail. + */ +static void userspace_set_region_sync(struct dm_dirty_log *log, + region_t region, int in_sync) +{ + int r; + struct log_c *lc = log->context; + struct { + region_t r; + int64_t i; + } pkg; + + pkg.r = region; + pkg.i = (int64_t)in_sync; + + r = userspace_do_request(lc, lc->uuid, DM_ULOG_SET_REGION_SYNC, + (char *)&pkg, sizeof(pkg), + NULL, NULL); + + /* + * It would be nice to be able to report failures. + * However, it is easy emough to detect and resolve. + */ + return; +} + +/* + * userspace_get_sync_count + * + * If there is any sort of failure when consulting the server, + * we assume that the sync count is zero. + * + * Returns: sync count on success, 0 on failure + */ +static region_t userspace_get_sync_count(struct dm_dirty_log *log) +{ + int r; + size_t rdata_size; + uint64_t sync_count; + struct log_c *lc = log->context; + + rdata_size = sizeof(sync_count); + r = userspace_do_request(lc, lc->uuid, DM_ULOG_GET_SYNC_COUNT, + NULL, 0, + (char *)&sync_count, &rdata_size); + + if (r) + return 0; + + if (sync_count >= lc->region_count) + lc->in_sync_hint = lc->region_count; + + return (region_t)sync_count; +} + +/* + * userspace_status + * + * Returns: amount of space consumed + */ +static int userspace_status(struct dm_dirty_log *log, status_type_t status_type, + char *result, unsigned maxlen) +{ + int r = 0; + size_t sz = (size_t)maxlen; + struct log_c *lc = log->context; + + switch (status_type) { + case STATUSTYPE_INFO: + r = userspace_do_request(lc, lc->uuid, DM_ULOG_STATUS_INFO, + NULL, 0, + result, &sz); + + if (r) { + sz = 0; + DMEMIT("%s 1 COM_FAILURE", log->type->name); + } + break; + case STATUSTYPE_TABLE: + sz = 0; + DMEMIT("%s %u %s %s", log->type->name, lc->usr_argc + 1, + lc->uuid, lc->usr_argv_str); + break; + } + return (r) ? 0 : (int)sz; +} + +/* + * userspace_is_remote_recovering + * + * Returns: 1 if region recovering, 0 otherwise + */ +static int userspace_is_remote_recovering(struct dm_dirty_log *log, + region_t region) +{ + int r; + uint64_t region64 = region; + struct log_c *lc = log->context; + static unsigned long long limit; + struct { + int64_t is_recovering; + uint64_t in_sync_hint; + } pkg; + size_t rdata_size = sizeof(pkg); + + /* + * Once the mirror has been reported to be in-sync, + * it will never again ask for recovery work. So, + * we can safely say there is not a remote machine + * recovering if the device is in-sync. (in_sync_hint + * must be reset at resume time.) + */ + if (region < lc->in_sync_hint) + return 0; + else if (jiffies < limit) + return 1; + + limit = jiffies + (HZ / 4); + r = userspace_do_request(lc, lc->uuid, DM_ULOG_IS_REMOTE_RECOVERING, + (char *)®ion64, sizeof(region64), + (char *)&pkg, &rdata_size); + if (r) + return 1; + + lc->in_sync_hint = pkg.in_sync_hint; + + return (int)pkg.is_recovering; +} + +static struct dm_dirty_log_type _userspace_type = { + .name = "userspace", + .module = THIS_MODULE, + .ctr = userspace_ctr, + .dtr = userspace_dtr, + .presuspend = userspace_presuspend, + .postsuspend = userspace_postsuspend, + .resume = userspace_resume, + .get_region_size = userspace_get_region_size, + .is_clean = userspace_is_clean, + .in_sync = userspace_in_sync, + .flush = userspace_flush, + .mark_region = userspace_mark_region, + .clear_region = userspace_clear_region, + .get_resync_work = userspace_get_resync_work, + .set_region_sync = userspace_set_region_sync, + .get_sync_count = userspace_get_sync_count, + .status = userspace_status, + .is_remote_recovering = userspace_is_remote_recovering, +}; + +static int __init userspace_dirty_log_init(void) +{ + int r = 0; + + flush_entry_pool = mempool_create(100, flush_entry_alloc, + flush_entry_free, NULL); + + if (!flush_entry_pool) { + DMWARN("Unable to create flush_entry_pool: No memory."); + return -ENOMEM; + } + + r = dm_ulog_tfr_init(); + if (r) { + DMWARN("Unable to initialize userspace log communications"); + mempool_destroy(flush_entry_pool); + return r; + } + + r = dm_dirty_log_type_register(&_userspace_type); + if (r) { + DMWARN("Couldn't register userspace dirty log type"); + dm_ulog_tfr_exit(); + mempool_destroy(flush_entry_pool); + return r; + } + + DMINFO("version 1.0.0 loaded"); + return 0; +} + +static void __exit userspace_dirty_log_exit(void) +{ + dm_dirty_log_type_unregister(&_userspace_type); + dm_ulog_tfr_exit(); + mempool_destroy(flush_entry_pool); + + DMINFO("version 1.0.0 unloaded"); + return; +} + +module_init(userspace_dirty_log_init); +module_exit(userspace_dirty_log_exit); + +MODULE_DESCRIPTION(DM_NAME " userspace dirty log link"); +MODULE_AUTHOR("Jonathan Brassow <dm-devel@redhat.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c new file mode 100644 index 000000000000..0ca1ee768a1f --- /dev/null +++ b/drivers/md/dm-log-userspace-transfer.c @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2006-2009 Red Hat, Inc. + * + * This file is released under the LGPL. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <net/sock.h> +#include <linux/workqueue.h> +#include <linux/connector.h> +#include <linux/device-mapper.h> +#include <linux/dm-log-userspace.h> + +#include "dm-log-userspace-transfer.h" + +static uint32_t dm_ulog_seq; + +/* + * Netlink/Connector is an unreliable protocol. How long should + * we wait for a response before assuming it was lost and retrying? + * (If we do receive a response after this time, it will be discarded + * and the response to the resent request will be waited for. + */ +#define DM_ULOG_RETRY_TIMEOUT (15 * HZ) + +/* + * Pre-allocated space for speed + */ +#define DM_ULOG_PREALLOCED_SIZE 512 +static struct cn_msg *prealloced_cn_msg; +static struct dm_ulog_request *prealloced_ulog_tfr; + +static struct cb_id ulog_cn_id = { + .idx = CN_IDX_DM, + .val = CN_VAL_DM_USERSPACE_LOG +}; + +static DEFINE_MUTEX(dm_ulog_lock); + +struct receiving_pkg { + struct list_head list; + struct completion complete; + + uint32_t seq; + + int error; + size_t *data_size; + char *data; +}; + +static DEFINE_SPINLOCK(receiving_list_lock); +static struct list_head receiving_list; + +static int dm_ulog_sendto_server(struct dm_ulog_request *tfr) +{ + int r; + struct cn_msg *msg = prealloced_cn_msg; + + memset(msg, 0, sizeof(struct cn_msg)); + + msg->id.idx = ulog_cn_id.idx; + msg->id.val = ulog_cn_id.val; + msg->ack = 0; + msg->seq = tfr->seq; + msg->len = sizeof(struct dm_ulog_request) + tfr->data_size; + + r = cn_netlink_send(msg, 0, gfp_any()); + + return r; +} + +/* + * Parameters for this function can be either msg or tfr, but not + * both. This function fills in the reply for a waiting request. + * If just msg is given, then the reply is simply an ACK from userspace + * that the request was received. + * + * Returns: 0 on success, -ENOENT on failure + */ +static int fill_pkg(struct cn_msg *msg, struct dm_ulog_request *tfr) +{ + uint32_t rtn_seq = (msg) ? msg->seq : (tfr) ? tfr->seq : 0; + struct receiving_pkg *pkg; + + /* + * The 'receiving_pkg' entries in this list are statically + * allocated on the stack in 'dm_consult_userspace'. + * Each process that is waiting for a reply from the user + * space server will have an entry in this list. + * + * We are safe to do it this way because the stack space + * is unique to each process, but still addressable by + * other processes. + */ + list_for_each_entry(pkg, &receiving_list, list) { + if (rtn_seq != pkg->seq) + continue; + + if (msg) { + pkg->error = -msg->ack; + /* + * If we are trying again, we will need to know our + * storage capacity. Otherwise, along with the + * error code, we make explicit that we have no data. + */ + if (pkg->error != -EAGAIN) + *(pkg->data_size) = 0; + } else if (tfr->data_size > *(pkg->data_size)) { + DMERR("Insufficient space to receive package [%u] " + "(%u vs %lu)", tfr->request_type, + tfr->data_size, *(pkg->data_size)); + + *(pkg->data_size) = 0; + pkg->error = -ENOSPC; + } else { + pkg->error = tfr->error; + memcpy(pkg->data, tfr->data, tfr->data_size); + *(pkg->data_size) = tfr->data_size; + } + complete(&pkg->complete); + return 0; + } + + return -ENOENT; +} + +/* + * This is the connector callback that delivers data + * that was sent from userspace. + */ +static void cn_ulog_callback(void *data) +{ + struct cn_msg *msg = (struct cn_msg *)data; + struct dm_ulog_request *tfr = (struct dm_ulog_request *)(msg + 1); + + spin_lock(&receiving_list_lock); + if (msg->len == 0) + fill_pkg(msg, NULL); + else if (msg->len < sizeof(*tfr)) + DMERR("Incomplete message received (expected %u, got %u): [%u]", + (unsigned)sizeof(*tfr), msg->len, msg->seq); + else + fill_pkg(NULL, tfr); + spin_unlock(&receiving_list_lock); +} + +/** + * dm_consult_userspace + * @uuid: log's uuid (must be DM_UUID_LEN in size) + * @request_type: found in include/linux/dm-log-userspace.h + * @data: data to tx to the server + * @data_size: size of data in bytes + * @rdata: place to put return data from server + * @rdata_size: value-result (amount of space given/amount of space used) + * + * rdata_size is undefined on failure. + * + * Memory used to communicate with userspace is zero'ed + * before populating to ensure that no unwanted bits leak + * from kernel space to user-space. All userspace log communications + * between kernel and user space go through this function. + * + * Returns: 0 on success, -EXXX on failure + **/ +int dm_consult_userspace(const char *uuid, int request_type, + char *data, size_t data_size, + char *rdata, size_t *rdata_size) +{ + int r = 0; + size_t dummy = 0; + int overhead_size = + sizeof(struct dm_ulog_request *) + sizeof(struct cn_msg); + struct dm_ulog_request *tfr = prealloced_ulog_tfr; + struct receiving_pkg pkg; + + if (data_size > (DM_ULOG_PREALLOCED_SIZE - overhead_size)) { + DMINFO("Size of tfr exceeds preallocated size"); + return -EINVAL; + } + + if (!rdata_size) + rdata_size = &dummy; +resend: + /* + * We serialize the sending of requests so we can + * use the preallocated space. + */ + mutex_lock(&dm_ulog_lock); + + memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size); + memcpy(tfr->uuid, uuid, DM_UUID_LEN); + tfr->seq = dm_ulog_seq++; + + /* + * Must be valid request type (all other bits set to + * zero). This reserves other bits for possible future + * use. + */ + tfr->request_type = request_type & DM_ULOG_REQUEST_MASK; + + tfr->data_size = data_size; + if (data && data_size) + memcpy(tfr->data, data, data_size); + + memset(&pkg, 0, sizeof(pkg)); + init_completion(&pkg.complete); + pkg.seq = tfr->seq; + pkg.data_size = rdata_size; + pkg.data = rdata; + spin_lock(&receiving_list_lock); + list_add(&(pkg.list), &receiving_list); + spin_unlock(&receiving_list_lock); + + r = dm_ulog_sendto_server(tfr); + + mutex_unlock(&dm_ulog_lock); + + if (r) { + DMERR("Unable to send log request [%u] to userspace: %d", + request_type, r); + spin_lock(&receiving_list_lock); + list_del_init(&(pkg.list)); + spin_unlock(&receiving_list_lock); + + goto out; + } + + r = wait_for_completion_timeout(&(pkg.complete), DM_ULOG_RETRY_TIMEOUT); + spin_lock(&receiving_list_lock); + list_del_init(&(pkg.list)); + spin_unlock(&receiving_list_lock); + if (!r) { + DMWARN("[%s] Request timed out: [%u/%u] - retrying", + (strlen(uuid) > 8) ? + (uuid + (strlen(uuid) - 8)) : (uuid), + request_type, pkg.seq); + goto resend; + } + + r = pkg.error; + if (r == -EAGAIN) + goto resend; + +out: + return r; +} + +int dm_ulog_tfr_init(void) +{ + int r; + void *prealloced; + + INIT_LIST_HEAD(&receiving_list); + + prealloced = kmalloc(DM_ULOG_PREALLOCED_SIZE, GFP_KERNEL); + if (!prealloced) + return -ENOMEM; + + prealloced_cn_msg = prealloced; + prealloced_ulog_tfr = prealloced + sizeof(struct cn_msg); + + r = cn_add_callback(&ulog_cn_id, "dmlogusr", cn_ulog_callback); + if (r) { + cn_del_callback(&ulog_cn_id); + return r; + } + + return 0; +} + +void dm_ulog_tfr_exit(void) +{ + cn_del_callback(&ulog_cn_id); + kfree(prealloced_cn_msg); +} diff --git a/drivers/md/dm-log-userspace-transfer.h b/drivers/md/dm-log-userspace-transfer.h new file mode 100644 index 000000000000..c26d8e4e2710 --- /dev/null +++ b/drivers/md/dm-log-userspace-transfer.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2006-2009 Red Hat, Inc. + * + * This file is released under the LGPL. + */ + +#ifndef __DM_LOG_USERSPACE_TRANSFER_H__ +#define __DM_LOG_USERSPACE_TRANSFER_H__ + +#define DM_MSG_PREFIX "dm-log-userspace" + +int dm_ulog_tfr_init(void); +void dm_ulog_tfr_exit(void); +int dm_consult_userspace(const char *uuid, int request_type, + char *data, size_t data_size, + char *rdata, size_t *rdata_size); + +#endif /* __DM_LOG_USERSPACE_TRANSFER_H__ */ diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 03f22076381f..334a3593cdfd 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -57,6 +57,7 @@ header-y += dlmconstants.h header-y += dlm_device.h header-y += dlm_netlink.h header-y += dm-ioctl.h +header-y += dm-log-userspace.h header-y += dn.h header-y += dqblk_xfs.h header-y += efs_fs_sb.h diff --git a/include/linux/connector.h b/include/linux/connector.h index b9966e64604e..b68d27850d51 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -41,8 +41,10 @@ #define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */ #define CN_DST_IDX 0x6 #define CN_DST_VAL 0x1 +#define CN_IDX_DM 0x7 /* Device Mapper */ +#define CN_VAL_DM_USERSPACE_LOG 0x1 -#define CN_NETLINK_USERS 7 +#define CN_NETLINK_USERS 8 /* * Maximum connector's message size. diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h new file mode 100644 index 000000000000..642e3017b51f --- /dev/null +++ b/include/linux/dm-log-userspace.h @@ -0,0 +1,386 @@ +/* + * Copyright (C) 2006-2009 Red Hat, Inc. + * + * This file is released under the LGPL. + */ + +#ifndef __DM_LOG_USERSPACE_H__ +#define __DM_LOG_USERSPACE_H__ + +#include <linux/dm-ioctl.h> /* For DM_UUID_LEN */ + +/* + * The device-mapper userspace log module consists of a kernel component and + * a user-space component. The kernel component implements the API defined + * in dm-dirty-log.h. Its purpose is simply to pass the parameters and + * return values of those API functions between kernel and user-space. + * + * Below are defined the 'request_types' - DM_ULOG_CTR, DM_ULOG_DTR, etc. + * These request types represent the different functions in the device-mapper + * dirty log API. Each of these is described in more detail below. + * + * The user-space program must listen for requests from the kernel (representing + * the various API functions) and process them. + * + * User-space begins by setting up the communication link (error checking + * removed for clarity): + * fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); + * addr.nl_family = AF_NETLINK; + * addr.nl_groups = CN_IDX_DM; + * addr.nl_pid = 0; + * r = bind(fd, (struct sockaddr *) &addr, sizeof(addr)); + * opt = addr.nl_groups; + * setsockopt(fd, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &opt, sizeof(opt)); + * + * User-space will then wait to receive requests form the kernel, which it + * will process as described below. The requests are received in the form, + * ((struct dm_ulog_request) + (additional data)). Depending on the request + * type, there may or may not be 'additional data'. In the descriptions below, + * you will see 'Payload-to-userspace' and 'Payload-to-kernel'. The + * 'Payload-to-userspace' is what the kernel sends in 'additional data' as + * necessary parameters to complete the request. The 'Payload-to-kernel' is + * the 'additional data' returned to the kernel that contains the necessary + * results of the request. The 'data_size' field in the dm_ulog_request + * structure denotes the availability and amount of payload data. + */ + +/* + * DM_ULOG_CTR corresponds to (found in dm-dirty-log.h): + * int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti, + * unsigned argc, char **argv); + * + * Payload-to-userspace: + * A single string containing all the argv arguments separated by ' 's + * Payload-to-kernel: + * None. ('data_size' in the dm_ulog_request struct should be 0.) + * + * The UUID contained in the dm_ulog_request structure is the reference that + * will be used by all request types to a specific log. The constructor must + * record this assotiation with instance created. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and + * 'data_size' appropriately. + */ +#define DM_ULOG_CTR 1 + +/* + * DM_ULOG_DTR corresponds to (found in dm-dirty-log.h): + * void (*dtr)(struct dm_dirty_log *log); + * + * Payload-to-userspace: + * A single string containing all the argv arguments separated by ' 's + * Payload-to-kernel: + * None. ('data_size' in the dm_ulog_request struct should be 0.) + * + * The UUID contained in the dm_ulog_request structure is all that is + * necessary to identify the log instance being destroyed. There is no + * payload data. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and clearing + * 'data_size' appropriately. + */ +#define DM_ULOG_DTR 2 + +/* + * DM_ULOG_PRESUSPEND corresponds to (found in dm-dirty-log.h): + * int (*presuspend)(struct dm_dirty_log *log); + * + * Payload-to-userspace: + * None. + * Payload-to-kernel: + * None. + * + * The UUID contained in the dm_ulog_request structure is all that is + * necessary to identify the log instance being presuspended. There is no + * payload data. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and + * 'data_size' appropriately. + */ +#define DM_ULOG_PRESUSPEND 3 + +/* + * DM_ULOG_POSTSUSPEND corresponds to (found in dm-dirty-log.h): + * int (*postsuspend)(struct dm_dirty_log *log); + * + * Payload-to-userspace: + * None. + * Payload-to-kernel: + * None. + * + * The UUID contained in the dm_ulog_request structure is all that is + * necessary to identify the log instance being postsuspended. There is no + * payload data. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and + * 'data_size' appropriately. + */ +#define DM_ULOG_POSTSUSPEND 4 + +/* + * DM_ULOG_RESUME corresponds to (found in dm-dirty-log.h): + * int (*resume)(struct dm_dirty_log *log); + * + * Payload-to-userspace: + * None. + * Payload-to-kernel: + * None. + * + * The UUID contained in the dm_ulog_request structure is all that is + * necessary to identify the log instance being resumed. There is no + * payload data. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and + * 'data_size' appropriately. + */ +#define DM_ULOG_RESUME 5 + +/* + * DM_ULOG_GET_REGION_SIZE corresponds to (found in dm-dirty-log.h): + * uint32_t (*get_region_size)(struct dm_dirty_log *log); + * + * Payload-to-userspace: + * None. + * Payload-to-kernel: + * uint64_t - contains the region size + * + * The region size is something that was determined at constructor time. + * It is returned in the payload area and 'data_size' is set to + * reflect this. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field appropriately. + */ +#define DM_ULOG_GET_REGION_SIZE 6 + +/* + * DM_ULOG_IS_CLEAN corresponds to (found in dm-dirty-log.h): + * int (*is_clean)(struct dm_dirty_log *log, region_t region); + * + * Payload-to-userspace: + * uint64_t - the region to get clean status on + * Payload-to-kernel: + * int64_t - 1 if clean, 0 otherwise + * + * Payload is sizeof(uint64_t) and contains the region for which the clean + * status is being made. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - filling the payload with 0 (not clean) or + * 1 (clean), setting 'data_size' and 'error' appropriately. + */ +#define DM_ULOG_IS_CLEAN 7 + +/* + * DM_ULOG_IN_SYNC corresponds to (found in dm-dirty-log.h): + * int (*in_sync)(struct dm_dirty_log *log, region_t region, + * int can_block); + * + * Payload-to-userspace: + * uint64_t - the region to get sync status on + * Payload-to-kernel: + * int64_t - 1 if in-sync, 0 otherwise + * + * Exactly the same as 'is_clean' above, except this time asking "has the + * region been recovered?" vs. "is the region not being modified?" + */ +#define DM_ULOG_IN_SYNC 8 + +/* + * DM_ULOG_FLUSH corresponds to (found in dm-dirty-log.h): + * int (*flush)(struct dm_dirty_log *log); + * + * Payload-to-userspace: + * None. + * Payload-to-kernel: + * None. + * + * No incoming or outgoing payload. Simply flush log state to disk. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and clearing + * 'data_size' appropriately. + */ +#define DM_ULOG_FLUSH 9 + +/* + * DM_ULOG_MARK_REGION corresponds to (found in dm-dirty-log.h): + * void (*mark_region)(struct dm_dirty_log *log, region_t region); + * + * Payload-to-userspace: + * uint64_t [] - region(s) to mark + * Payload-to-kernel: + * None. + * + * Incoming payload contains the one or more regions to mark dirty. + * The number of regions contained in the payload can be determined from + * 'data_size/sizeof(uint64_t)'. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and clearing + * 'data_size' appropriately. + */ +#define DM_ULOG_MARK_REGION 10 + +/* + * DM_ULOG_CLEAR_REGION corresponds to (found in dm-dirty-log.h): + * void (*clear_region)(struct dm_dirty_log *log, region_t region); + * + * Payload-to-userspace: + * uint64_t [] - region(s) to clear + * Payload-to-kernel: + * None. + * + * Incoming payload contains the one or more regions to mark clean. + * The number of regions contained in the payload can be determined from + * 'data_size/sizeof(uint64_t)'. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and clearing + * 'data_size' appropriately. + */ +#define DM_ULOG_CLEAR_REGION 11 + +/* + * DM_ULOG_GET_RESYNC_WORK corresponds to (found in dm-dirty-log.h): + * int (*get_resync_work)(struct dm_dirty_log *log, region_t *region); + * + * Payload-to-userspace: + * None. + * Payload-to-kernel: + * { + * int64_t i; -- 1 if recovery necessary, 0 otherwise + * uint64_t r; -- The region to recover if i=1 + * } + * 'data_size' should be set appropriately. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field appropriately. + */ +#define DM_ULOG_GET_RESYNC_WORK 12 + +/* + * DM_ULOG_SET_REGION_SYNC corresponds to (found in dm-dirty-log.h): + * void (*set_region_sync)(struct dm_dirty_log *log, + * region_t region, int in_sync); + * + * Payload-to-userspace: + * { + * uint64_t - region to set sync state on + * int64_t - 0 if not-in-sync, 1 if in-sync + * } + * Payload-to-kernel: + * None. + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and clearing + * 'data_size' appropriately. + */ +#define DM_ULOG_SET_REGION_SYNC 13 + +/* + * DM_ULOG_GET_SYNC_COUNT corresponds to (found in dm-dirty-log.h): + * region_t (*get_sync_count)(struct dm_dirty_log *log); + * + * Payload-to-userspace: + * None. + * Payload-to-kernel: + * uint64_t - the number of in-sync regions + * + * No incoming payload. Kernel-bound payload contains the number of + * regions that are in-sync (in a size_t). + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and + * 'data_size' appropriately. + */ +#define DM_ULOG_GET_SYNC_COUNT 14 + +/* + * DM_ULOG_STATUS_INFO corresponds to (found in dm-dirty-log.h): + * int (*status)(struct dm_dirty_log *log, STATUSTYPE_INFO, + * char *result, unsigned maxlen); + * + * Payload-to-userspace: + * None. + * Payload-to-kernel: + * Character string containing STATUSTYPE_INFO + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and + * 'data_size' appropriately. + */ +#define DM_ULOG_STATUS_INFO 15 + +/* + * DM_ULOG_STATUS_TABLE corresponds to (found in dm-dirty-log.h): + * int (*status)(struct dm_dirty_log *log, STATUSTYPE_TABLE, + * char *result, unsigned maxlen); + * + * Payload-to-userspace: + * None. + * Payload-to-kernel: + * Character string containing STATUSTYPE_TABLE + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and + * 'data_size' appropriately. + */ +#define DM_ULOG_STATUS_TABLE 16 + +/* + * DM_ULOG_IS_REMOTE_RECOVERING corresponds to (found in dm-dirty-log.h): + * int (*is_remote_recovering)(struct dm_dirty_log *log, region_t region); + * + * Payload-to-userspace: + * uint64_t - region to determine recovery status on + * Payload-to-kernel: + * { + * int64_t is_recovering; -- 0 if no, 1 if yes + * uint64_t in_sync_hint; -- lowest region still needing resync + * } + * + * When the request has been processed, user-space must return the + * dm_ulog_request to the kernel - setting the 'error' field and + * 'data_size' appropriately. + */ +#define DM_ULOG_IS_REMOTE_RECOVERING 17 + +/* + * (DM_ULOG_REQUEST_MASK & request_type) to get the request type + * + * Payload-to-userspace: + * A single string containing all the argv arguments separated by ' 's + * Payload-to-kernel: + * None. ('data_size' in the dm_ulog_request struct should be 0.) + * + * We are reserving 8 bits of the 32-bit 'request_type' field for the + * various request types above. The remaining 24-bits are currently + * set to zero and are reserved for future use and compatibility concerns. + * + * User-space should always use DM_ULOG_REQUEST_TYPE to aquire the + * request type from the 'request_type' field to maintain forward compatibility. + */ +#define DM_ULOG_REQUEST_MASK 0xFF +#define DM_ULOG_REQUEST_TYPE(request_type) \ + (DM_ULOG_REQUEST_MASK & (request_type)) + +struct dm_ulog_request { + char uuid[DM_UUID_LEN]; /* Ties a request to a specific mirror log */ + char padding[7]; /* Padding because DM_UUID_LEN = 129 */ + + int32_t error; /* Used to report back processing errors */ + + uint32_t seq; /* Sequence number for request */ + uint32_t request_type; /* DM_ULOG_* defined above */ + uint32_t data_size; /* How much data (not including this struct) */ + + char data[0]; +}; + +#endif /* __DM_LOG_USERSPACE_H__ */ |
