diff options
| -rw-r--r-- | arch/m68k/Kconfig.bus | 8 | ||||
| -rw-r--r-- | arch/m68k/coldfire/pci.c | 114 | ||||
| -rw-r--r-- | arch/m68k/include/asm/atarihw.h | 1 | ||||
| -rw-r--r-- | arch/m68k/include/asm/io.h | 10 | ||||
| -rw-r--r-- | arch/m68k/include/asm/io_mm.h | 98 | ||||
| -rw-r--r-- | arch/m68k/include/asm/io_no.h | 253 | ||||
| -rw-r--r-- | arch/m68k/include/asm/kmap.h | 80 | ||||
| -rw-r--r-- | arch/m68k/include/asm/nubus.h | 1 | ||||
| -rw-r--r-- | arch/m68k/include/asm/q40_master.h | 2 | ||||
| -rw-r--r-- | arch/m68k/include/asm/raw_io.h | 14 | ||||
| -rw-r--r-- | arch/m68k/include/asm/vga.h | 9 | ||||
| -rw-r--r-- | arch/m68k/include/asm/virtconvert.h | 2 | ||||
| -rw-r--r-- | arch/m68k/include/asm/zorro.h | 1 | ||||
| -rw-r--r-- | arch/m68k/mm/kmap.c | 8 |
14 files changed, 230 insertions, 371 deletions
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus index d5e66ec136db..aef698fa50e5 100644 --- a/arch/m68k/Kconfig.bus +++ b/arch/m68k/Kconfig.bus @@ -59,6 +59,10 @@ config ATARI_ROM_ISA config GENERIC_ISA_DMA def_bool ISA +source "drivers/zorro/Kconfig" + +endif + config PCI bool "PCI support" depends on M54xx @@ -66,10 +70,8 @@ config PCI Enable the PCI bus. Support for the PCI bus hardware built into the ColdFire 547x and 548x processors. +if PCI source "drivers/pci/Kconfig" - -source "drivers/zorro/Kconfig" - endif if !MMU diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c index 3097fa2ca746..62b0eb6cf69a 100644 --- a/arch/m68k/coldfire/pci.c +++ b/arch/m68k/coldfire/pci.c @@ -23,20 +23,10 @@ /* * Memory and IO mappings. We use a 1:1 mapping for local host memory to - * PCI bus memory (no reason not to really). IO space doesn't matter, we - * always use access functions for that. The device configuration space is - * mapped over the IO map space when we enable it in the PCICAR register. + * PCI bus memory (no reason not to really). IO space is mapped in its own + * separate address region. The device configuration space is mapped over + * the IO map space when we enable it in the PCICAR register. */ -#define PCI_MEM_PA 0xf0000000 /* Host physical address */ -#define PCI_MEM_BA 0xf0000000 /* Bus physical address */ -#define PCI_MEM_SIZE 0x08000000 /* 128 MB */ -#define PCI_MEM_MASK (PCI_MEM_SIZE - 1) - -#define PCI_IO_PA 0xf8000000 /* Host physical address */ -#define PCI_IO_BA 0x00000000 /* Bus physical address */ -#define PCI_IO_SIZE 0x00010000 /* 64k */ -#define PCI_IO_MASK (PCI_IO_SIZE - 1) - static struct pci_bus *rootbus; static unsigned long iospace; @@ -56,13 +46,6 @@ static unsigned char mcf_host_irq[] = { 0, 69, 69, 71, 71, }; - -static inline void syncio(void) -{ - /* The ColdFire "nop" instruction waits for all bus IO to complete */ - __asm__ __volatile__ ("nop"); -} - /* * Configuration space access functions. Configuration space access is * through the IO mapping window, enabling it via the PCICAR register. @@ -84,9 +67,9 @@ static int mcf_pci_readconfig(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_SUCCESSFUL; } - syncio(); addr = mcf_mk_pcicar(bus->number, devfn, where); __raw_writel(PCICAR_E | addr, PCICAR); + __raw_readl(PCICAR); addr = iospace + (where & 0x3); switch (size) { @@ -101,8 +84,8 @@ static int mcf_pci_readconfig(struct pci_bus *bus, unsigned int devfn, break; } - syncio(); __raw_writel(0, PCICAR); + __raw_readl(PCICAR); return PCIBIOS_SUCCESSFUL; } @@ -116,9 +99,9 @@ static int mcf_pci_writeconfig(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_SUCCESSFUL; } - syncio(); addr = mcf_mk_pcicar(bus->number, devfn, where); __raw_writel(PCICAR_E | addr, PCICAR); + __raw_readl(PCICAR); addr = iospace + (where & 0x3); switch (size) { @@ -133,8 +116,8 @@ static int mcf_pci_writeconfig(struct pci_bus *bus, unsigned int devfn, break; } - syncio(); __raw_writel(0, PCICAR); + __raw_readl(PCICAR); return PCIBIOS_SUCCESSFUL; } @@ -144,89 +127,6 @@ static struct pci_ops mcf_pci_ops = { }; /* - * IO address space access functions. Pretty strait forward, these are - * directly mapped in to the IO mapping window. And that is mapped into - * virtual address space. - */ -u8 mcf_pci_inb(u32 addr) -{ - return __raw_readb(iospace + (addr & PCI_IO_MASK)); -} -EXPORT_SYMBOL(mcf_pci_inb); - -u16 mcf_pci_inw(u32 addr) -{ - return le16_to_cpu(__raw_readw(iospace + (addr & PCI_IO_MASK))); -} -EXPORT_SYMBOL(mcf_pci_inw); - -u32 mcf_pci_inl(u32 addr) -{ - return le32_to_cpu(__raw_readl(iospace + (addr & PCI_IO_MASK))); -} -EXPORT_SYMBOL(mcf_pci_inl); - -void mcf_pci_insb(u32 addr, u8 *buf, u32 len) -{ - for (; len; len--) - *buf++ = mcf_pci_inb(addr); -} -EXPORT_SYMBOL(mcf_pci_insb); - -void mcf_pci_insw(u32 addr, u16 *buf, u32 len) -{ - for (; len; len--) - *buf++ = mcf_pci_inw(addr); -} -EXPORT_SYMBOL(mcf_pci_insw); - -void mcf_pci_insl(u32 addr, u32 *buf, u32 len) -{ - for (; len; len--) - *buf++ = mcf_pci_inl(addr); -} -EXPORT_SYMBOL(mcf_pci_insl); - -void mcf_pci_outb(u8 v, u32 addr) -{ - __raw_writeb(v, iospace + (addr & PCI_IO_MASK)); -} -EXPORT_SYMBOL(mcf_pci_outb); - -void mcf_pci_outw(u16 v, u32 addr) -{ - __raw_writew(cpu_to_le16(v), iospace + (addr & PCI_IO_MASK)); -} -EXPORT_SYMBOL(mcf_pci_outw); - -void mcf_pci_outl(u32 v, u32 addr) -{ - __raw_writel(cpu_to_le32(v), iospace + (addr & PCI_IO_MASK)); -} -EXPORT_SYMBOL(mcf_pci_outl); - -void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len) -{ - for (; len; len--) - mcf_pci_outb(*buf++, addr); -} -EXPORT_SYMBOL(mcf_pci_outsb); - -void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len) -{ - for (; len; len--) - mcf_pci_outw(*buf++, addr); -} -EXPORT_SYMBOL(mcf_pci_outsw); - -void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len) -{ - for (; len; len--) - mcf_pci_outl(*buf++, addr); -} -EXPORT_SYMBOL(mcf_pci_outsl); - -/* * Initialize the PCI bus registers, and scan the bus. */ static struct resource mcf_pci_mem = { diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h index 972c8f33f055..9000b249d225 100644 --- a/arch/m68k/include/asm/atarihw.h +++ b/arch/m68k/include/asm/atarihw.h @@ -23,6 +23,7 @@ #include <linux/types.h> #include <asm/bootinfo-atari.h> #include <asm/raw_io.h> +#include <asm/kmap.h> extern u_long atari_mch_cookie; extern u_long atari_mch_type; diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h index 756089cc019c..ca2849afb087 100644 --- a/arch/m68k/include/asm/io.h +++ b/arch/m68k/include/asm/io.h @@ -1,14 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifdef __uClinux__ +#if defined(__uClinux__) || defined(CONFIG_COLDFIRE) #include <asm/io_no.h> #else #include <asm/io_mm.h> #endif - -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define writeb_relaxed(b, addr) writeb(b, addr) -#define writew_relaxed(b, addr) writew(b, addr) -#define writel_relaxed(b, addr) writel(b, addr) diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h index ed5333e87879..fe485f4f5fac 100644 --- a/arch/m68k/include/asm/io_mm.h +++ b/arch/m68k/include/asm/io_mm.h @@ -26,6 +26,7 @@ #include <linux/compiler.h> #include <asm/raw_io.h> #include <asm/virtconvert.h> +#include <asm/kmap.h> #include <asm-generic/iomap.h> @@ -85,53 +86,7 @@ #endif /* ATARI_ROM_ISA */ -#if defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE) - -#define HAVE_ARCH_PIO_SIZE -#define PIO_OFFSET 0 -#define PIO_MASK 0xffff -#define PIO_RESERVED 0x10000 - -u8 mcf_pci_inb(u32 addr); -u16 mcf_pci_inw(u32 addr); -u32 mcf_pci_inl(u32 addr); -void mcf_pci_insb(u32 addr, u8 *buf, u32 len); -void mcf_pci_insw(u32 addr, u16 *buf, u32 len); -void mcf_pci_insl(u32 addr, u32 *buf, u32 len); - -void mcf_pci_outb(u8 v, u32 addr); -void mcf_pci_outw(u16 v, u32 addr); -void mcf_pci_outl(u32 v, u32 addr); -void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len); -void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len); -void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len); - -#define inb mcf_pci_inb -#define inb_p mcf_pci_inb -#define inw mcf_pci_inw -#define inw_p mcf_pci_inw -#define inl mcf_pci_inl -#define inl_p mcf_pci_inl -#define insb mcf_pci_insb -#define insw mcf_pci_insw -#define insl mcf_pci_insl - -#define outb mcf_pci_outb -#define outb_p mcf_pci_outb -#define outw mcf_pci_outw -#define outw_p mcf_pci_outw -#define outl mcf_pci_outl -#define outl_p mcf_pci_outl -#define outsb mcf_pci_outsb -#define outsw mcf_pci_outsw -#define outsl mcf_pci_outsl - -#define readb(addr) in_8(addr) -#define writeb(v, addr) out_8((addr), (v)) -#define readw(addr) in_le16(addr) -#define writew(v, addr) out_le16((addr), (v)) - -#elif defined(CONFIG_ISA) || defined(CONFIG_ATARI_ROM_ISA) +#if defined(CONFIG_ISA) || defined(CONFIG_ATARI_ROM_ISA) #if MULTI_ISA == 0 #undef MULTI_ISA @@ -414,8 +369,7 @@ static inline void isa_delay(void) #define writew(val, addr) out_le16((addr), (val)) #endif /* CONFIG_ATARI_ROM_ISA */ -#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA) && \ - !(defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE)) +#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA) /* * We need to define dummy functions for GENERIC_IOMAP support. */ @@ -461,39 +415,6 @@ static inline void isa_delay(void) #define mmiowb() -static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -#define ioremap_uc ioremap_nocache -static inline void __iomem *ioremap_wt(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} -static inline void __iomem *ioremap_fullcache(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - __builtin_memset((void __force *) addr, val, count); -} -static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) -{ - __builtin_memcpy(dst, (void __force *) src, count); -} -static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - __builtin_memcpy((void __force *) dst, src, count); -} - #ifndef CONFIG_SUN3 #define IO_SPACE_LIMIT 0xffff #else @@ -515,13 +436,12 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int */ #define xlate_dev_kmem_ptr(p) p -static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - return (void __iomem *) port; -} +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) -static inline void ioport_unmap(void __iomem *p) -{ -} +#define writeb_relaxed(b, addr) writeb(b, addr) +#define writew_relaxed(b, addr) writew(b, addr) +#define writel_relaxed(b, addr) writel(b, addr) #endif /* _IO_H */ diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h index 86f45b403bcc..83a0a6d449f4 100644 --- a/arch/m68k/include/asm/io_no.h +++ b/arch/m68k/include/asm/io_no.h @@ -2,191 +2,148 @@ #ifndef _M68KNOMMU_IO_H #define _M68KNOMMU_IO_H -#ifdef __KERNEL__ - -#define ARCH_HAS_IOREMAP_WT - -#include <asm/virtconvert.h> -#include <asm-generic/iomap.h> - /* - * These are for ISA/PCI shared memory _only_ and should never be used - * on any other type of memory, including Zorro memory. They are meant to - * access the bus in the bus byte order which is little-endian!. - * - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the m68k architecture, we just read/write the - * memory location directly. - */ -/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates - * two accesses to memory, which may be undesirable for some devices. + * Convert a physical memory address into a IO memory address. + * For us this is trivially a type cast. */ +#define iomem(a) ((void __iomem *) (a)) /* - * swap functions are sometimes needed to interface little-endian hardware + * The non-MMU m68k and ColdFire IO and memory mapped hardware access + * functions have always worked in CPU native endian. We need to define + * that behavior here first before we include asm-generic/io.h. */ -static inline unsigned short _swapw(volatile unsigned short v) -{ - return ((v << 8) | (v >> 8)); -} - -static inline unsigned int _swapl(volatile unsigned long v) -{ - return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); -} - -#define readb(addr) \ +#define __raw_readb(addr) \ ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) -#define readw(addr) \ +#define __raw_readw(addr) \ ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) -#define readl(addr) \ +#define __raw_readl(addr) \ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) -#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) -#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) -#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) +#define __raw_writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define __raw_writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define __raw_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b)) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel +#if defined(CONFIG_COLDFIRE) +/* + * For ColdFire platforms we may need to do some extra checks for what + * type of address range we are accessing. Include the ColdFire platform + * definitions so we can figure out if need to do something special. + */ +#include <asm/byteorder.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#endif /* CONFIG_COLDFIRE */ -static inline void io_outsb(unsigned int addr, const void *buf, int len) +#if defined(IOMEMBASE) +/* + * The ColdFire SoC internal peripherals are mapped into virtual address + * space using the ACR registers of the cache control unit. This means we + * are using a 1:1 physical:virtual mapping for them. We can quickly + * determine if we are accessing an internal peripheral device given the + * physical or vitrual address using the same range check. This check logic + * applies just the same of there is no MMU but something like a PCI bus + * is present. + */ +static int __cf_internalio(unsigned long addr) { - volatile unsigned char *ap = (volatile unsigned char *) addr; - unsigned char *bp = (unsigned char *) buf; - while (len--) - *ap = *bp++; + return (addr >= IOMEMBASE) && (addr <= IOMEMBASE + IOMEMSIZE - 1); } -static inline void io_outsw(unsigned int addr, const void *buf, int len) +static int cf_internalio(const volatile void __iomem *addr) { - volatile unsigned short *ap = (volatile unsigned short *) addr; - unsigned short *bp = (unsigned short *) buf; - while (len--) - *ap = _swapw(*bp++); + return __cf_internalio((unsigned long) addr); } -static inline void io_outsl(unsigned int addr, const void *buf, int len) +/* + * We need to treat built-in peripherals and bus based address ranges + * differently. Local built-in peripherals (and the ColdFire SoC parts + * have quite a lot of them) are always native endian - which is big + * endian on m68k/ColdFire. Bus based address ranges, like the PCI bus, + * are accessed little endian - so we need to byte swap those. + */ +#define readw readw +static inline u16 readw(const volatile void __iomem *addr) { - volatile unsigned int *ap = (volatile unsigned int *) addr; - unsigned int *bp = (unsigned int *) buf; - while (len--) - *ap = _swapl(*bp++); + if (cf_internalio(addr)) + return __raw_readw(addr); + return __le16_to_cpu(__raw_readw(addr)); } -static inline void io_insb(unsigned int addr, void *buf, int len) +#define readl readl +static inline u32 readl(const volatile void __iomem *addr) { - volatile unsigned char *ap = (volatile unsigned char *) addr; - unsigned char *bp = (unsigned char *) buf; - while (len--) - *bp++ = *ap; + if (cf_internalio(addr)) + return __raw_readl(addr); + return __le32_to_cpu(__raw_readl(addr)); } -static inline void io_insw(unsigned int addr, void *buf, int len) +#define writew writew +static inline void writew(u16 value, volatile void __iomem *addr) { - volatile unsigned short *ap = (volatile unsigned short *) addr; - unsigned short *bp = (unsigned short *) buf; - while (len--) - *bp++ = _swapw(*ap); + if (cf_internalio(addr)) + __raw_writew(value, addr); + else + __raw_writew(__cpu_to_le16(value), addr); } -static inline void io_insl(unsigned int addr, void *buf, int len) +#define writel writel +static inline void writel(u32 value, volatile void __iomem *addr) { - volatile unsigned int *ap = (volatile unsigned int *) addr; - unsigned int *bp = (unsigned int *) buf; - while (len--) - *bp++ = _swapl(*ap); + if (cf_internalio(addr)) + __raw_writel(value, addr); + else + __raw_writel(__cpu_to_le32(value), addr); } -#define mmiowb() - -/* - * make the short names macros so specific devices - * can override them as required - */ - -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -#define inb(addr) readb(addr) -#define inw(addr) readw(addr) -#define inl(addr) readl(addr) -#define outb(x,addr) ((void) writeb(x,addr)) -#define outw(x,addr) ((void) writew(x,addr)) -#define outl(x,addr) ((void) writel(x,addr)) - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x,addr) outb(x,addr) -#define outw_p(x,addr) outw(x,addr) -#define outl_p(x,addr) outl(x,addr) +#else -#define outsb(a,b,l) io_outsb(a,b,l) -#define outsw(a,b,l) io_outsw(a,b,l) -#define outsl(a,b,l) io_outsl(a,b,l) +#define readb __raw_readb +#define readw __raw_readw +#define readl __raw_readl +#define writeb __raw_writeb +#define writew __raw_writew +#define writel __raw_writel -#define insb(a,b,l) io_insb(a,b,l) -#define insw(a,b,l) io_insw(a,b,l) -#define insl(a,b,l) io_insl(a,b,l) - -#define IO_SPACE_LIMIT 0xffffffff - - -/* Values for nocacheflag and cmode */ -#define IOMAP_FULL_CACHING 0 -#define IOMAP_NOCACHE_SER 1 -#define IOMAP_NOCACHE_NONSER 2 -#define IOMAP_WRITETHROUGH 3 - -static inline void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) -{ - return (void *) physaddr; -} -static inline void *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void *ioremap_wt(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} -static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -#define iounmap(addr) do { } while(0) +#endif /* IOMEMBASE */ +#if defined(CONFIG_PCI) /* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access + * Support for PCI bus access uses the asm-generic access functions. + * We need to supply the base address and masks for the normal memory + * and IO address space mappings. */ -#define xlate_dev_mem_ptr(p) __va(p) +#define PCI_MEM_PA 0xf0000000 /* Host physical address */ +#define PCI_MEM_BA 0xf0000000 /* Bus physical address */ +#define PCI_MEM_SIZE 0x08000000 /* 128 MB */ +#define PCI_MEM_MASK (PCI_MEM_SIZE - 1) + +#define PCI_IO_PA 0xf8000000 /* Host physical address */ +#define PCI_IO_BA 0x00000000 /* Bus physical address */ +#define PCI_IO_SIZE 0x00010000 /* 64k */ +#define PCI_IO_MASK (PCI_IO_SIZE - 1) + +#define HAVE_ARCH_PIO_SIZE +#define PIO_OFFSET 0 +#define PIO_MASK 0xffff +#define PIO_RESERVED 0x10000 +#define PCI_IOBASE ((void __iomem *) PCI_IO_PA) +#define PCI_SPACE_LIMIT PCI_IO_MASK +#endif /* CONFIG_PCI */ /* - * Convert a virtual cached pointer to an uncached pointer + * These are defined in kmap.h as static inline functions. To maintain + * previous behavior we put these define guards here so io_mm.h doesn't + * see them. */ -#define xlate_dev_kmem_ptr(p) p +#ifdef CONFIG_MMU +#define memset_io memset_io +#define memcpy_fromio memcpy_fromio +#define memcpy_toio memcpy_toio +#endif -static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - return (void __iomem *) port; -} - -static inline void ioport_unmap(void __iomem *p) -{ -} - -#endif /* __KERNEL__ */ +#include <asm/kmap.h> +#include <asm/virtconvert.h> +#include <asm-generic/io.h> #endif /* _M68KNOMMU_IO_H */ diff --git a/arch/m68k/include/asm/kmap.h b/arch/m68k/include/asm/kmap.h new file mode 100644 index 000000000000..84b8333db8ad --- /dev/null +++ b/arch/m68k/include/asm/kmap.h @@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _KMAP_H +#define _KMAP_H + +#ifdef CONFIG_MMU + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +/* + * These functions exported by arch/m68k/mm/kmap.c. + * Only needed on MMU enabled systems. + */ +extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, + int cacheflag); +extern void iounmap(void __iomem *addr); +extern void __iounmap(void *addr, unsigned long size); + +#define ioremap ioremap +static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +#define ioremap_nocache ioremap_nocache +static inline void __iomem *ioremap_nocache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} + +#define ioremap_uc ioremap_nocache +static inline void __iomem *ioremap_wt(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} + +#define ioremap_fillcache ioremap_fullcache +static inline void __iomem *ioremap_fullcache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +static inline void memset_io(volatile void __iomem *addr, unsigned char val, + int count) +{ + __builtin_memset((void __force *) addr, val, count); +} + +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, + int count) +{ + __builtin_memcpy(dst, (void __force *) src, count); +} + +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, + int count) +{ + __builtin_memcpy((void __force *) dst, src, count); +} + +#endif /* CONFIG_MMU */ + +#define ioport_map ioport_map +static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return (void __iomem *) port; +} + +#define ioport_unmap ioport_unmap +static inline void ioport_unmap(void __iomem *p) +{ +} + +#endif /* _KMAP_H */ diff --git a/arch/m68k/include/asm/nubus.h b/arch/m68k/include/asm/nubus.h index d0d2039e434e..c2281da6c51a 100644 --- a/arch/m68k/include/asm/nubus.h +++ b/arch/m68k/include/asm/nubus.h @@ -3,6 +3,7 @@ #define _ASM_M68K_NUBUS_H #include <asm/raw_io.h> +#include <asm/kmap.h> #define nubus_readb raw_inb #define nubus_readw raw_inw diff --git a/arch/m68k/include/asm/q40_master.h b/arch/m68k/include/asm/q40_master.h index 3a89c088800c..9b00fb8079e6 100644 --- a/arch/m68k/include/asm/q40_master.h +++ b/arch/m68k/include/asm/q40_master.h @@ -8,7 +8,7 @@ #define _Q40_MASTER_H #include <asm/raw_io.h> - +#include <asm/kmap.h> #define q40_master_addr 0xff000000 diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h index 05e940c29b54..85761255dde5 100644 --- a/arch/m68k/include/asm/raw_io.h +++ b/arch/m68k/include/asm/raw_io.h @@ -13,20 +13,6 @@ #include <asm/byteorder.h> - -/* Values for nocacheflag and cmode */ -#define IOMAP_FULL_CACHING 0 -#define IOMAP_NOCACHE_SER 1 -#define IOMAP_NOCACHE_NONSER 2 -#define IOMAP_WRITETHROUGH 3 - -extern void iounmap(void __iomem *addr); - -extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, - int cacheflag); -extern void __iounmap(void *addr, unsigned long size); - - /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates * two accesses to memory, which may be undesirable for some devices. */ diff --git a/arch/m68k/include/asm/vga.h b/arch/m68k/include/asm/vga.h index 010a624d1b39..4742e6bc3ab8 100644 --- a/arch/m68k/include/asm/vga.h +++ b/arch/m68k/include/asm/vga.h @@ -2,7 +2,15 @@ #ifndef _ASM_M68K_VGA_H #define _ASM_M68K_VGA_H +/* + * Some ColdFire platforms do in fact have a PCI bus. So for those we want + * to use the real IO access functions, don't fake them out or redirect them + * for that case. + */ +#ifndef CONFIG_PCI + #include <asm/raw_io.h> +#include <asm/kmap.h> /* * FIXME @@ -25,4 +33,5 @@ #define writeb raw_outb #define writew raw_outw +#endif /* CONFIG_PCI */ #endif /* _ASM_M68K_VGA_H */ diff --git a/arch/m68k/include/asm/virtconvert.h b/arch/m68k/include/asm/virtconvert.h index 4aea6be7b220..dfe43083b579 100644 --- a/arch/m68k/include/asm/virtconvert.h +++ b/arch/m68k/include/asm/virtconvert.h @@ -16,11 +16,13 @@ /* * Change virtual addresses to physical addresses and vv. */ +#define virt_to_phys virt_to_phys static inline unsigned long virt_to_phys(void *address) { return __pa(address); } +#define phys_to_virt phys_to_virt static inline void *phys_to_virt(unsigned long address) { return __va(address); diff --git a/arch/m68k/include/asm/zorro.h b/arch/m68k/include/asm/zorro.h index 96f64bf7bcaa..60fc4b6f294d 100644 --- a/arch/m68k/include/asm/zorro.h +++ b/arch/m68k/include/asm/zorro.h @@ -3,6 +3,7 @@ #define _ASM_M68K_ZORRO_H #include <asm/raw_io.h> +#include <asm/kmap.h> #define z_readb raw_inb #define z_readw raw_inw diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c index 3b420f6d8822..40a3b327da07 100644 --- a/arch/m68k/mm/kmap.c +++ b/arch/m68k/mm/kmap.c @@ -126,6 +126,10 @@ void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cachefla return (void __iomem *)physaddr; } #endif +#ifdef CONFIG_COLDFIRE + if (__cf_internalio(physaddr)) + return (void __iomem *) physaddr; +#endif #ifdef DEBUG printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag); @@ -236,6 +240,10 @@ void iounmap(void __iomem *addr) ((unsigned long)addr > 0x60000000))) free_io_area((__force void *)addr); #else +#ifdef CONFIG_COLDFIRE + if (cf_internalio(addr)) + return; +#endif free_io_area((__force void *)addr); #endif } |
