diff options
234 files changed, 7197 insertions, 2122 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-usbport b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport new file mode 100644 index 000000000000..f440e690daef --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport @@ -0,0 +1,12 @@ +What: /sys/class/leds/<led>/ports/<port> +Date: September 2016 +KernelVersion: 4.9 +Contact: linux-leds@vger.kernel.org + linux-usb@vger.kernel.org +Description: + Every dir entry represents a single USB port that can be + selected for the USB port trigger. Selecting ports makes trigger + observing them for any connected devices and lighting on LED if + there are any. + Echoing "1" value selects USB port. Echoing "0" unselects it. + Current state can be also read. diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt new file mode 100644 index 000000000000..35383adb10f1 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt @@ -0,0 +1,41 @@ +Qualcomm's PM8941 USB ID Extcon device + +Some Qualcomm PMICs have a "misc" module that can be used to detect when +the USB ID pin has been pulled low or high. + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain "qcom,pm8941-misc"; + +- reg: + Usage: required + Value type: <u32> + Definition: Should contain the offset to the misc address space + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: Should contain the usb id interrupt + +- interrupt-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the string "usb_id" for the usb id interrupt + +Example: + + pmic { + usb_id: misc@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + } + + usb-controller { + extcon = <&usb_id>; + }; diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt new file mode 100644 index 000000000000..09aeba94538d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt @@ -0,0 +1,23 @@ +Driver for Broadcom Northstar USB 3.0 PHY + +Required properties: + +- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy". +- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B + MMI. +- reg-names: "dmp" and "ccb-mii" + +Initialization of USB 3.0 PHY depends on Northstar version. There are currently +three known series: Ax, Bx and Cx. +Known A0: BCM4707 rev 0 +Known B0: BCM4707 rev 4, BCM53573 rev 2 +Known B1: BCM4707 rev 6 +Known C0: BCM47094 rev 0 + +Example: + usb3-phy { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x18105000 0x1000>, <0x18003000 0x1000>; + reg-names = "dmp", "ccb-mii"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 379b84a567cc..1d25b04cd05e 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -12,6 +12,16 @@ Required properties: - interrupts: Should contain phy interrupt - fsl,anatop: phandle for anatop register, it is only for imx6 SoC series +Optional properties: +- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable + high-speed trimming resistor connected in parallel with the 45 ohm resistor + that terminates the DN output signal. Default: 45 +- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable + high-speed trimming resistor connected in parallel with the 45 ohm resistor + that terminates the DP output signal. Default: 45 +- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of + the 17.78mA TX reference current. Default: 100 + Example: usbphy1: usbphy@020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt new file mode 100644 index 000000000000..3c29c77a7018 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt @@ -0,0 +1,64 @@ +ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK + +Required properties (phy (parent) node): + - compatible : should be one of the listed compatibles: + * "rockchip,rk3366-usb2phy" + * "rockchip,rk3399-usb2phy" + - reg : the address offset of grf for usb-phy configuration. + - #clock-cells : should be 0. + - clock-output-names : specify the 480m output clock name. + +Optional properties: + - clocks : phandle + phy specifier pair, for the input clock of phy. + - clock-names : input clock name of phy, must be "phyclk". + +Required nodes : a sub-node is required for each port the phy provides. + The sub-node name is used to identify host or otg port, + and shall be the following entries: + * "otg-port" : the name of otg port. + * "host-port" : the name of host port. + +Required properties (port (child) node): + - #phy-cells : must be 0. See ./phy-bindings.txt for details. + - interrupts : specify an interrupt for each entry in interrupt-names. + - interrupt-names : a list which shall be the following entries: + * "otg-id" : for the otg id interrupt. + * "otg-bvalid" : for the otg vbus interrupt. + * "linestate" : for the host/otg linestate interrupt. + +Optional properties: + - phy-supply : phandle to a regulator that provides power to VBUS. + See ./phy-bindings.txt for details. + +Example: + +grf: syscon@ff770000 { + compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + +... + + u2phy: usb2-phy@700 { + compatible = "rockchip,rk3366-usb2phy"; + reg = <0x700 0x2c>; + #clock-cells = <0>; + clock-output-names = "sclk_otgphy0_480m"; + + u2phy_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-id", "otg-bvalid", "linestate"; + status = "okay"; + }; + + u2phy_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "okay"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt new file mode 100644 index 000000000000..6ea867e3176f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt @@ -0,0 +1,101 @@ +* ROCKCHIP type-c PHY +--------------------- + +Required properties: + - compatible : must be "rockchip,rk3399-typec-phy" + - reg: Address and length of the usb phy control register set + - rockchip,grf : phandle to the syscon managing the "general + register files" + - clocks : phandle + clock specifier for the phy clocks + - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref"; + - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or + <&cru SCLK_UPHY1_TCPDCORE>; + - assigned-clock-rates : the phy core clk frequency, shall be: 50000000 + - resets : a list of phandle + reset specifier pairs + - reset-names : string reset name, must be: + "uphy", "uphy-pipe", "uphy-tcphy" + - extcon : extcon specifier for the Power Delivery + +Note, there are 2 type-c phys for RK3399, and they are almost identical, except +these registers(description below), every register node contains 3 sections: +offset, enable bit, write mask bit. + - rockchip,typec-conn-dir : the register of type-c connector direction, + for type-c phy0, it must be <0xe580 0 16>; + for type-c phy1, it must be <0xe58c 0 16>; + - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable + control. + for type-c phy0, it must be <0xe580 3 19>; + for type-c phy1, it must be <0xe58c 3 19>; + - rockchip,external-psm : the register of type-c phy external psm clock + selection. + for type-c phy0, it must be <0xe588 14 30>; + for type-c phy1, it must be <0xe594 14 30>; + - rockchip,pipe-status : the register of type-c phy pipe status. + for type-c phy0, it must be <0xe5c0 0 0>; + for type-c phy1, it must be <0xe5c0 16 16>; + +Required nodes : a sub-node is required for each port the phy provides. + The sub-node name is used to identify dp or usb3 port, + and shall be the following entries: + * "dp-port" : the name of DP port. + * "usb3-port" : the name of USB3 port. + +Required properties (port (child) node): +- #phy-cells : must be 0, See ./phy-bindings.txt for details. + +Example: + tcphy0: phy@ff7c0000 { + compatible = "rockchip,rk3399-typec-phy"; + reg = <0x0 0xff7c0000 0x0 0x40000>; + rockchip,grf = <&grf>; + extcon = <&fusb0>; + clocks = <&cru SCLK_UPHY0_TCPDCORE>, + <&cru SCLK_UPHY0_TCPDPHY_REF>; + clock-names = "tcpdcore", "tcpdphy-ref"; + assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; + assigned-clock-rates = <50000000>; + resets = <&cru SRST_UPHY0>, + <&cru SRST_UPHY0_PIPE_L00>, + <&cru SRST_P_UPHY0_TCPHY>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + rockchip,typec-conn-dir = <0xe580 0 16>; + rockchip,usb3tousb2-en = <0xe580 3 19>; + rockchip,external-psm = <0xe588 14 30>; + rockchip,pipe-status = <0xe5c0 0 0>; + + tcphy0_dp: dp-port { + #phy-cells = <0>; + }; + + tcphy0_usb3: usb3-port { + #phy-cells = <0>; + }; + }; + + tcphy1: phy@ff800000 { + compatible = "rockchip,rk3399-typec-phy"; + reg = <0x0 0xff800000 0x0 0x40000>; + rockchip,grf = <&grf>; + extcon = <&fusb1>; + clocks = <&cru SCLK_UPHY1_TCPDCORE>, + <&cru SCLK_UPHY1_TCPDPHY_REF>; + clock-names = "tcpdcore", "tcpdphy-ref"; + assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; + assigned-clock-rates = <50000000>; + resets = <&cru SRST_UPHY1>, + <&cru SRST_UPHY1_PIPE_L00>, + <&cru SRST_P_UPHY1_TCPHY>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + rockchip,typec-conn-dir = <0xe58c 0 16>; + rockchip,usb3tousb2-en = <0xe58c 3 19>; + rockchip,external-psm = <0xe594 14 30>; + rockchip,pipe-status = <0xe5c0 16 16>; + + tcphy1_dp: dp-port { + #phy-cells = <0>; + }; + + tcphy1_usb3: usb3-port { + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index 2281d6cdecb1..ace9cce2704a 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -6,6 +6,8 @@ This file provides information on what the device node for the R-Car generation Required properties: - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795 SoC. + "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796 + SoC. "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the @@ -30,11 +32,11 @@ Example (R-Car H3): compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp7_clks R8A7795_CLK_EHCI0>; + clocks = <&cpg CPG_MOD 703>; }; usb-phy@ee0a0200 { compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0a0200 0 0x700>; - clocks = <&mstp7_clks R8A7795_CLK_EHCI0>; + clocks = <&cpg CPG_MOD 702>; }; diff --git a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt new file mode 100644 index 000000000000..0f6222a672ce --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt @@ -0,0 +1,31 @@ +Rockchip PCIE PHY +----------------------- + +Required properties: + - compatible: rockchip,rk3399-pcie-phy + - #phy-cells: must be 0 + - clocks: Must contain an entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must be "refclk" + - resets: Must contain an entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must be "phy" + +Example: + +grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + + ... + + pcie_phy: pcie-phy { + compatible = "rockchip,rk3399-pcie-phy"; + #phy-cells = <0>; + clocks = <&cru SCLK_PCIEPHY_REF>; + clock-names = "refclk"; + resets = <&cru SRST_PCIEPHY>; + reset-names = "phy"; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt index cc6be9680a6d..57dc388e2fa2 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt @@ -27,6 +27,9 @@ Optional Properties: - clocks : phandle + clock specifier for the phy clocks - clock-names: string, clock name, must be "phyclk" - #clock-cells: for users of the phy-pll, should be 0 +- reset-names: Only allow the following entries: + - phy-reset +- resets: Must contain an entry for each entry in reset-names. Example: diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 95736d77fbb7..287150db6db4 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -10,6 +10,7 @@ Required properties: * allwinner,sun8i-a23-usb-phy * allwinner,sun8i-a33-usb-phy * allwinner,sun8i-h3-usb-phy + * allwinner,sun50i-a64-usb-phy - reg : a list of offset + length pairs - reg-names : * "phy_ctrl" diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index a3b394587874..cd13e6157088 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -31,6 +31,8 @@ OMAP USB2 PHY Required properties: - compatible: Should be "ti,omap-usb2" + Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on + DRA7x Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY in DRA7x - reg : Address and length of the register set for the device. diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 341dc67f3472..0e03344e2e8b 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -81,6 +81,8 @@ i.mx specific properties - fsl,usbmisc: phandler of non-core register device, with one argument that indicate usb controller index - disable-over-current: disable over current detect +- over-current-active-high: over current signal polarity is high active, + typically over current signal polarity is low active. - external-vbus-divider: enables off-chip resistor divider for Vbus Example: diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 20a68bf2b4e7..7d16ebfaa5a1 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -26,7 +26,10 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties - g-use-dma: enable dma usage in gadget driver. - g-rx-fifo-size: size of rx fifo size in gadget mode. - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. -- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. + +Deprecated properties: +- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) + in gadget mode. Example: diff --git a/Documentation/devicetree/bindings/usb/dwc3-cavium.txt b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt new file mode 100644 index 000000000000..710b782ccf65 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt @@ -0,0 +1,28 @@ +Cavium SuperSpeed DWC3 USB SoC controller + +Required properties: +- compatible: Should contain "cavium,octeon-7130-usb-uctl" + +Required child node: +A child node must exist to represent the core DWC3 IP block. The name of +the node is not important. The content of the node is defined in dwc3.txt. + +Example device node: + + uctl@1180069000000 { + compatible = "cavium,octeon-7130-usb-uctl"; + reg = <0x00011800 0x69000000 0x00000000 0x00000100>; + ranges; + #address-cells = <0x00000002>; + #size-cells = <0x00000002>; + refclk-frequency = <0x05f5e100>; + refclk-type-ss = "dlmc_ref_clk0"; + refclk-type-hs = "dlmc_ref_clk0"; + power = <0x00000002 0x00000002 0x00000001>; + xhci@1690000000000 { + compatible = "cavium,octeon-7130-xhci", "synopsys,dwc3"; + reg = <0x00016900 0x00000000 0x00000010 0x00000000>; + interrupt-parent = <0x00000010>; + interrupts = <0x00000009 0x00000004>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 7d7ce089b003..e3e6983288e3 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -13,7 +13,8 @@ Optional properties: in the array is expected to be a handle to the USB2/HS PHY and the second element is expected to be a handle to the USB3/SS PHY - phys: from the *Generic PHY* bindings - - phy-names: from the *Generic PHY* bindings + - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" + or "usb3-phy". - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. @@ -39,6 +40,11 @@ Optional properties: disabling the suspend signal to the PHY. - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection in PHY P3 power state. + - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists + in GUSB2PHYCFG, specify that USB2 PHY doesn't provide + a free-running PHY clock. + - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power + from P0 to P1/P2/P3 without delay. - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal utmi_l1_suspend_n, false when asserts utmi_sleep_n - snps,hird-threshold: HIRD threshold diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index bba825711873..bfadeb1c3bab 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -11,6 +11,11 @@ Optional properties: "peripheral" and "otg". In case this attribute isn't passed via DT, USB DRD controllers should default to OTG. + - phy_type: tells USB controllers that we want to configure the core to support + a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is + selected. Valid arguments are "utmi" and "utmi_wide". + In case this isn't passed via DT, USB controllers should + default to HW capability. - otg-rev: tells usb driver the release number of the OTG and EH supplement with which the device and its descriptors are compliant, in binary-coded decimal (i.e. 2.0 is 0200H). This @@ -34,6 +39,7 @@ dwc3@4a030000 { usb-phy = <&usb2_phy>, <&usb3,phy>; maximum-speed = "super-speed"; dr_mode = "otg"; + phy_type = "utmi_wide"; otg-rev = <0x0200>; adp-disable; }; diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index b6040563e51a..9e18e000339e 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -9,6 +9,7 @@ Required properties: - "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device + - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device - "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device - "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt new file mode 100644 index 000000000000..0536a938e3ab --- /dev/null +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -0,0 +1,59 @@ +Rockchip SuperSpeed DWC3 USB SoC controller + +Required properties: +- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC +- clocks: A list of phandle + clock-specifier pairs for the + clocks listed in clock-names +- clock-names: Should contain the following: + "ref_clk" Controller reference clk, have to be 24 MHz + "suspend_clk" Controller suspend clk, have to be 24 MHz or 32 KHz + "bus_clk" Master/Core clock, have to be >= 62.5 MHz for SS + operation and >= 30MHz for HS operation + "grf_clk" Controller grf clk + +Required child node: +A child node must exist to represent the core DWC3 IP block. The name of +the node is not important. The content of the node is defined in dwc3.txt. + +Phy documentation is provided in the following places: +Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt + +Example device nodes: + + usbdrd3_0: usb@fe800000 { + compatible = "rockchip,rk3399-dwc3"; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "grf_clk"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + usbdrd_dwc3_0: dwc3@fe800000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe800000 0x0 0x100000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "otg"; + status = "disabled"; + }; + }; + + usbdrd3_1: usb@fe900000 { + compatible = "rockchip,rk3399-dwc3"; + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, + <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "grf_clk"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + usbdrd_dwc3_1: dwc3@fe900000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe900000 0x0 0x100000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "otg"; + status = "disabled"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb4604.txt b/Documentation/devicetree/bindings/usb/usb4604.txt new file mode 100644 index 000000000000..82506d17712c --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb4604.txt @@ -0,0 +1,19 @@ +SMSC USB4604 High-Speed Hub Controller + +Required properties: +- compatible: Should be "smsc,usb4604" + +Optional properties: +- reg: Specifies the i2c slave address, it is required and should be 0x2d + if I2C is used. +- reset-gpios: Should specify GPIO for reset. +- initial-mode: Should specify initial mode. + (1 for HUB mode, 2 for STANDBY mode) + +Examples: + usb-hub@2d { + compatible = "smsc,usb4604"; + reg = <0x2d>; + reset-gpios = <&gpx3 5 1>; + initial-mode = <1>; + }; diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index 3539d4e7d23e..f1e27faf528e 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -6,6 +6,7 @@ Required properties: "fsl,imx6q-usbmisc" for imx6q "fsl,vf610-usbmisc" for Vybrid vf610 "fsl,imx6sx-usbmisc" for imx6sx + "fsl,imx7d-usbmisc" for imx7d - reg: Should contain registers location and length Examples: diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 0e285941e3c7..01085cdc47c1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -4248,6 +4248,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. u = IGNORE_UAS (don't bind to the uas driver); w = NO_WP_DETECT (don't test whether the medium is write-protected). + y = ALWAYS_SYNC (issue a SYNCHRONIZE_CACHE + even if the device claims no cache) Example: quirks=0419:aaf5:rl,0421:0433:rc user_debug= [KNL,ARM] diff --git a/Documentation/leds/ledtrig-usbport.txt b/Documentation/leds/ledtrig-usbport.txt new file mode 100644 index 000000000000..69f54bfb4789 --- /dev/null +++ b/Documentation/leds/ledtrig-usbport.txt @@ -0,0 +1,41 @@ +USB port LED trigger +==================== + +This LED trigger can be used for signalling to the user a presence of USB device +in a given port. It simply turns on LED when device appears and turns it off +when it disappears. + +It requires selecting USB ports that should be observed. All available ones are +listed as separated entries in a "ports" subdirectory. Selecting is handled by +echoing "1" to a chosen port. + +Please note that this trigger allows selecting multiple USB ports for a single +LED. This can be useful in two cases: + +1) Device with single USB LED and few physical ports + +In such a case LED will be turned on as long as there is at least one connected +USB device. + +2) Device with a physical port handled by few controllers + +Some devices may have one controller per PHY standard. E.g. USB 3.0 physical +port may be handled by ohci-platform, ehci-platform and xhci-hcd. If there is +only one LED user will most likely want to assign ports from all 3 hubs. + + +This trigger can be activated from user space on led class devices as shown +below: + + echo usbport > trigger + +This adds sysfs attributes to the LED that are documented in: +Documentation/ABI/testing/sysfs-class-led-trigger-usbport + +Example use-case: + + echo usbport > trigger + echo 1 > ports/usb1-port1 + echo 1 > ports/usb2-port1 + cat ports/usb1-port1 + echo 0 > ports/usb1-port1 diff --git a/MAINTAINERS b/MAINTAINERS index 434a43d3864d..d33c0383575b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12216,7 +12216,7 @@ S: Maintained F: drivers/net/usb/lan78xx.* USB MASS STORAGE DRIVER -M: Matthew Dharm <mdharm-usb@one-eyed-alien.net> +M: Alan Stern <stern@rowland.harvard.edu> L: linux-usb@vger.kernel.org L: usb-storage@lists.one-eyed-alien.net S: Maintained @@ -12300,6 +12300,7 @@ F: drivers/net/usb/rtl8150.c USB SERIAL SUBSYSTEM M: Johan Hovold <johan@kernel.org> L: linux-usb@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git S: Maintained F: Documentation/usb/usb-serial.txt F: drivers/usb/serial/ diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c index 5b0ef7bbe8ac..5ce6d4176dc3 100644 --- a/drivers/bluetooth/bcm203x.c +++ b/drivers/bluetooth/bcm203x.c @@ -185,10 +185,8 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id data->state = BCM203X_LOAD_MINIDRV; data->urb = usb_alloc_urb(0, GFP_KERNEL); - if (!data->urb) { - BT_ERR("Can't allocate URB"); + if (!data->urb) return -ENOMEM; - } if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) { BT_ERR("Mini driver request failed"); diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 3d89e60a3e71..04788d92ea52 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -96,6 +96,12 @@ config EXTCON_PALMAS Say Y here to enable support for USB peripheral and USB host detection by palmas usb. +config EXTCON_QCOM_SPMI_MISC + tristate "Qualcomm USB extcon support" + help + Say Y here to enable SPMI PMIC based USB cable detection + support on Qualcomm PMICs such as PM8941. + config EXTCON_RT8973A tristate "Richtek RT8973A EXTCON support" depends on I2C diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index 972c813c375b..31a0a999c4fb 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o obj-$(CONFIG_EXTCON_MAX77843) += extcon-max77843.o obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o +obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c index 44e48aa78a84..bc538708c753 100644 --- a/drivers/extcon/extcon-adc-jack.c +++ b/drivers/extcon/extcon-adc-jack.c @@ -3,6 +3,9 @@ * * Analog Jack extcon driver with ADC-based detection capability. * + * Copyright (C) 2016 Samsung Electronics + * Chanwoo Choi <cw00.choi@samsung.com> + * * Copyright (C) 2012 Samsung Electronics * MyungJoo Ham <myungjoo.ham@samsung.com> * @@ -58,7 +61,7 @@ static void adc_jack_handler(struct work_struct *work) struct adc_jack_data *data = container_of(to_delayed_work(work), struct adc_jack_data, handler); - u32 state = 0; + struct adc_jack_cond *def; int ret, adc_val; int i; @@ -70,17 +73,18 @@ static void adc_jack_handler(struct work_struct *work) /* Get state from adc value with adc_conditions */ for (i = 0; i < data->num_conditions; i++) { - struct adc_jack_cond *def = &data->adc_conditions[i]; - if (!def->state) - break; + def = &data->adc_conditions[i]; if (def->min_adc <= adc_val && def->max_adc >= adc_val) { - state = def->state; - break; + extcon_set_state_sync(data->edev, def->id, true); + return; } } - /* if no def has met, it means state = 0 (no cables attached) */ - extcon_set_state(data->edev, state); + /* Set the detached state if adc value is not included in the range */ + for (i = 0; i < data->num_conditions; i++) { + def = &data->adc_conditions[i]; + extcon_set_state_sync(data->edev, def->id, false); + } } static irqreturn_t adc_jack_irq_thread(int irq, void *_data) @@ -114,16 +118,14 @@ static int adc_jack_probe(struct platform_device *pdev) return -ENOMEM; } - if (!pdata->adc_conditions || - !pdata->adc_conditions[0].state) { + if (!pdata->adc_conditions) { dev_err(&pdev->dev, "error: adc_conditions not defined.\n"); return -EINVAL; } data->adc_conditions = pdata->adc_conditions; /* Check the length of array and set num_conditions */ - for (i = 0; data->adc_conditions[i].state; i++) - ; + for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++); data->num_conditions = i; data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel); @@ -158,6 +160,7 @@ static int adc_jack_probe(struct platform_device *pdev) if (data->wakeup_source) device_init_wakeup(&pdev->dev, 1); + adc_jack_handler(&data->handler.work); return 0; } diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 1d8e0a57bd51..56e6c4c7c60d 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -183,7 +183,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info, if (clamp) val = ARIZONA_RMV_SHRT_HP1L; break; - }; + } snd_soc_dapm_mutex_lock(arizona->dapm); @@ -614,7 +614,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) } /* If the cable was removed while measuring ignore the result */ - ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL); + ret = extcon_get_state(info->edev, EXTCON_MECHANICAL); if (ret < 0) { dev_err(arizona->dev, "Failed to check cable state: %d\n", ret); @@ -649,7 +649,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) else report = EXTCON_JACK_HEADPHONE; - ret = extcon_set_cable_state_(info->edev, report, true); + ret = extcon_set_state_sync(info->edev, report, true); if (ret != 0) dev_err(arizona->dev, "Failed to report HP/line: %d\n", ret); @@ -732,7 +732,7 @@ err: ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); /* Just report headphone */ - ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true); + ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true); if (ret != 0) dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); @@ -789,7 +789,7 @@ err: ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); /* Just report headphone */ - ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true); + ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true); if (ret != 0) dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); @@ -829,7 +829,7 @@ static void arizona_micd_detect(struct work_struct *work) mutex_lock(&info->lock); /* If the cable was removed while measuring ignore the result */ - ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL); + ret = extcon_get_state(info->edev, EXTCON_MECHANICAL); if (ret < 0) { dev_err(arizona->dev, "Failed to check cable state: %d\n", ret); @@ -914,7 +914,7 @@ static void arizona_micd_detect(struct work_struct *work) arizona_identify_headphone(info); - ret = extcon_set_cable_state_(info->edev, + ret = extcon_set_state_sync(info->edev, EXTCON_JACK_MICROPHONE, true); if (ret != 0) dev_err(arizona->dev, "Headset report failed: %d\n", @@ -1108,7 +1108,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) if (info->last_jackdet == present) { dev_dbg(arizona->dev, "Detected jack\n"); - ret = extcon_set_cable_state_(info->edev, + ret = extcon_set_state_sync(info->edev, EXTCON_MECHANICAL, true); if (ret != 0) @@ -1149,10 +1149,13 @@ static irqreturn_t arizona_jackdet(int irq, void *data) info->micd_ranges[i].key, 0); input_sync(info->input); - ret = extcon_update_state(info->edev, 0xffffffff, 0); - if (ret != 0) - dev_err(arizona->dev, "Removal report failed: %d\n", - ret); + for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) { + ret = extcon_set_state_sync(info->edev, + arizona_cable[i], false); + if (ret != 0) + dev_err(arizona->dev, + "Removal report failed: %d\n", ret); + } regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index fd55c2f2080a..42f41e808292 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -189,19 +189,19 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) switch (chrg_type) { case DET_STAT_SDP: - dev_dbg(info->dev, "sdp cable is connecetd\n"); + dev_dbg(info->dev, "sdp cable is connected\n"); notify_otg = true; notify_charger = true; cable = EXTCON_CHG_USB_SDP; break; case DET_STAT_CDP: - dev_dbg(info->dev, "cdp cable is connecetd\n"); + dev_dbg(info->dev, "cdp cable is connected\n"); notify_otg = true; notify_charger = true; cable = EXTCON_CHG_USB_CDP; break; case DET_STAT_DCP: - dev_dbg(info->dev, "dcp cable is connecetd\n"); + dev_dbg(info->dev, "dcp cable is connected\n"); notify_charger = true; cable = EXTCON_CHG_USB_DCP; break; @@ -226,7 +226,7 @@ notify_otg: } if (notify_charger) - extcon_set_cable_state_(info->edev, cable, vbus_attach); + extcon_set_state_sync(info->edev, cable, vbus_attach); /* Clear the flags on disconnect event */ if (!vbus_attach) diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c index d023789f0fda..ebed22f22d75 100644 --- a/drivers/extcon/extcon-gpio.c +++ b/drivers/extcon/extcon-gpio.c @@ -49,7 +49,8 @@ static void gpio_extcon_work(struct work_struct *work) state = gpiod_get_value_cansleep(data->id_gpiod); if (data->pdata->gpio_active_low) state = !state; - extcon_set_state(data->edev, state); + + extcon_set_state_sync(data->edev, data->pdata->extcon_id, state); } static irqreturn_t gpio_irq_handler(int irq, void *dev_id) diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c index 852a7112f451..12e26c4e7763 100644 --- a/drivers/extcon/extcon-max14577.c +++ b/drivers/extcon/extcon-max14577.c @@ -3,7 +3,7 @@ * * Copyright (C) 2013,2014 Samsung Electronics * Chanwoo Choi <cw00.choi@samsung.com> - * Krzysztof Kozlowski <k.kozlowski@samsung.com> + * Krzysztof Kozlowski <krzk@kernel.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -357,7 +357,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info, if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_JIG, attached); + extcon_set_state_sync(info->edev, EXTCON_JIG, attached); return 0; } @@ -454,24 +454,24 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_USB, attached); - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP, + extcon_set_state_sync(info->edev, EXTCON_USB, attached); + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, attached); break; case MAX14577_CHARGER_TYPE_DEDICATED_CHG: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached); break; case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, attached); break; case MAX14577_CHARGER_TYPE_SPECIAL_500MA: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, attached); break; case MAX14577_CHARGER_TYPE_SPECIAL_1A: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, attached); break; case MAX14577_CHARGER_TYPE_NONE: @@ -791,6 +791,6 @@ static struct platform_driver max14577_muic_driver = { module_platform_driver(max14577_muic_driver); MODULE_DESCRIPTION("Maxim 14577/77836 Extcon driver"); -MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <k.kozlowski@samsung.com>"); +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <krzk@kernel.org>"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:extcon-max14577"); diff --git a/drivers/extcon/extcon-max3355.c b/drivers/extcon/extcon-max3355.c index c24abec5d06c..533e16a952b8 100644 --- a/drivers/extcon/extcon-max3355.c +++ b/drivers/extcon/extcon-max3355.c @@ -39,16 +39,16 @@ static irqreturn_t max3355_id_irq(int irq, void *dev_id) * As we don't have event for USB peripheral cable attached, * we simulate USB peripheral attach here. */ - extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, false); - extcon_set_cable_state_(data->edev, EXTCON_USB, true); + extcon_set_state_sync(data->edev, EXTCON_USB_HOST, false); + extcon_set_state_sync(data->edev, EXTCON_USB, true); } else { /* * ID = 0 means USB HOST cable attached. * As we don't have event for USB peripheral cable detached, * we simulate USB peripheral detach here. */ - extcon_set_cable_state_(data->edev, EXTCON_USB, false); - extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, true); + extcon_set_state_sync(data->edev, EXTCON_USB, false); + extcon_set_state_sync(data->edev, EXTCON_USB_HOST, true); } return IRQ_HANDLED; diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index f17cb76b567c..68dbcb814b2f 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -505,8 +505,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info, if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached); - extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached); + extcon_set_state_sync(info->edev, EXTCON_DOCK, attached); + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); goto out; case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */ dock_id = EXTCON_DOCK; @@ -514,8 +514,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info, case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ dock_id = EXTCON_DOCK; if (!attached) { - extcon_set_cable_state_(info->edev, EXTCON_USB, false); - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP, + extcon_set_state_sync(info->edev, EXTCON_USB, false); + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, false); } break; @@ -530,7 +530,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info, attached); if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, dock_id, attached); + extcon_set_state_sync(info->edev, dock_id, attached); out: return 0; @@ -596,7 +596,7 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info) attached); if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached); + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); break; case MAX77693_MUIC_GND_AV_CABLE_LOAD: /* Audio Video Cable with load, PATH:AUDIO */ @@ -604,14 +604,14 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info) attached); if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_USB, attached); - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP, + extcon_set_state_sync(info->edev, EXTCON_USB, attached); + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, attached); break; case MAX77693_MUIC_GND_MHL: case MAX77693_MUIC_GND_MHL_VB: /* MHL or MHL with USB/TA cable */ - extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached); + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); break; default: dev_err(info->dev, "failed to detect %s cable of gnd type\n", @@ -653,7 +653,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info, if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_JIG, attached); + extcon_set_state_sync(info->edev, EXTCON_JIG, attached); return 0; } @@ -807,10 +807,10 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) * - Support charging through micro-usb port without * data connection */ - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached); if (!cable_attached) - extcon_set_cable_state_(info->edev, + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, cable_attached); break; } @@ -834,13 +834,13 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) * - Support charging through micro-usb port without * data connection. */ - extcon_set_cable_state_(info->edev, EXTCON_USB, + extcon_set_state_sync(info->edev, EXTCON_USB, attached); - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, attached); if (!cable_attached) - extcon_set_cable_state_(info->edev, EXTCON_DOCK, + extcon_set_state_sync(info->edev, EXTCON_DOCK, cable_attached); break; case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ @@ -869,9 +869,9 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_DOCK, + extcon_set_state_sync(info->edev, EXTCON_DOCK, attached); - extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); break; } @@ -905,28 +905,28 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_USB, + extcon_set_state_sync(info->edev, EXTCON_USB, attached); - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, attached); break; case MAX77693_CHARGER_TYPE_DEDICATED_CHG: /* Only TA cable */ - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached); break; } break; case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, attached); break; case MAX77693_CHARGER_TYPE_APPLE_500MA: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, attached); break; case MAX77693_CHARGER_TYPE_APPLE_1A_2A: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, attached); break; case MAX77693_CHARGER_TYPE_DEAD_BATTERY: diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c index b188bd650efa..5d11fdf36e94 100644 --- a/drivers/extcon/extcon-max77843.c +++ b/drivers/extcon/extcon-max77843.c @@ -346,7 +346,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached); + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); break; case MAX77843_MUIC_GND_MHL_VB: case MAX77843_MUIC_GND_MHL: @@ -356,7 +356,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached); + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); break; default: dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n", @@ -392,7 +392,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info, if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_JIG, attached); + extcon_set_state_sync(info->edev, EXTCON_JIG, attached); return 0; } @@ -486,8 +486,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_USB, attached); - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP, + extcon_set_state_sync(info->edev, EXTCON_USB, attached); + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, attached); break; case MAX77843_MUIC_CHG_DOWNSTREAM: @@ -497,7 +497,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, attached); break; case MAX77843_MUIC_CHG_DEDICATED: @@ -507,7 +507,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached); break; case MAX77843_MUIC_CHG_SPECIAL_500MA: @@ -517,7 +517,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, attached); break; case MAX77843_MUIC_CHG_SPECIAL_1A: @@ -527,7 +527,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, attached); break; case MAX77843_MUIC_CHG_GND: @@ -536,10 +536,10 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) /* Charger cable on MHL accessory is attach or detach */ if (gnd_type == MAX77843_MUIC_GND_MHL_VB) - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, true); else if (gnd_type == MAX77843_MUIC_GND_MHL) - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, false); break; case MAX77843_MUIC_CHG_NONE: diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index 9a89320d09a8..4a0612fb9c07 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -331,11 +331,11 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info, switch (usb_type) { case MAX8997_USB_HOST: - extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached); + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); break; case MAX8997_USB_DEVICE: - extcon_set_cable_state_(info->edev, EXTCON_USB, attached); - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP, + extcon_set_state_sync(info->edev, EXTCON_USB, attached); + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, attached); break; default: @@ -361,7 +361,7 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info, switch (cable_type) { case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD: case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON: - extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached); + extcon_set_state_sync(info->edev, EXTCON_DOCK, attached); break; default: dev_err(info->dev, "failed to detect %s dock device\n", @@ -384,7 +384,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info, return ret; } - extcon_set_cable_state_(info->edev, EXTCON_JIG, attached); + extcon_set_state_sync(info->edev, EXTCON_JIG, attached); return 0; } @@ -406,7 +406,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info) return ret; break; case MAX8997_MUIC_ADC_MHL: - extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached); + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); break; case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF: case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON: @@ -489,19 +489,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info) } break; case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, attached); break; case MAX8997_CHARGER_TYPE_DEDICATED_CHG: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached); break; case MAX8997_CHARGER_TYPE_500MA: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, attached); break; case MAX8997_CHARGER_TYPE_1A: - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, attached); break; default: diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index caff46c0e214..634ba70782de 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -61,7 +61,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb) if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) { if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) { palmas_usb->linkstat = PALMAS_USB_STATE_VBUS; - extcon_set_cable_state_(edev, EXTCON_USB, true); + extcon_set_state_sync(edev, EXTCON_USB, true); dev_info(palmas_usb->dev, "USB cable is attached\n"); } else { dev_dbg(palmas_usb->dev, @@ -70,7 +70,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb) } else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) { if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) { palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; - extcon_set_cable_state_(edev, EXTCON_USB, false); + extcon_set_state_sync(edev, EXTCON_USB, false); dev_info(palmas_usb->dev, "USB cable is detached\n"); } else { dev_dbg(palmas_usb->dev, @@ -98,7 +98,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb) PALMAS_USB_ID_INT_LATCH_CLR, PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND); palmas_usb->linkstat = PALMAS_USB_STATE_ID; - extcon_set_cable_state_(edev, EXTCON_USB_HOST, true); + extcon_set_state_sync(edev, EXTCON_USB_HOST, true); dev_info(palmas_usb->dev, "USB-HOST cable is attached\n"); } else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) && (id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) { @@ -106,17 +106,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb) PALMAS_USB_ID_INT_LATCH_CLR, PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT); palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; - extcon_set_cable_state_(edev, EXTCON_USB_HOST, false); + extcon_set_state_sync(edev, EXTCON_USB_HOST, false); dev_info(palmas_usb->dev, "USB-HOST cable is detached\n"); } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) && (!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) { palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; - extcon_set_cable_state_(edev, EXTCON_USB_HOST, false); + extcon_set_state_sync(edev, EXTCON_USB_HOST, false); dev_info(palmas_usb->dev, "USB-HOST cable is detached\n"); } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) && (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) { palmas_usb->linkstat = PALMAS_USB_STATE_ID; - extcon_set_cable_state_(edev, EXTCON_USB_HOST, true); + extcon_set_state_sync(edev, EXTCON_USB_HOST, true); dev_info(palmas_usb->dev, " USB-HOST cable is attached\n"); } @@ -137,10 +137,10 @@ static void palmas_gpio_id_detect(struct work_struct *work) id = gpiod_get_value_cansleep(palmas_usb->id_gpiod); if (id) { - extcon_set_cable_state_(edev, EXTCON_USB_HOST, false); + extcon_set_state_sync(edev, EXTCON_USB_HOST, false); dev_info(palmas_usb->dev, "USB-HOST cable is detached\n"); } else { - extcon_set_cable_state_(edev, EXTCON_USB_HOST, true); + extcon_set_state_sync(edev, EXTCON_USB_HOST, true); dev_info(palmas_usb->dev, "USB-HOST cable is attached\n"); } } diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c new file mode 100644 index 000000000000..ca957a5f4291 --- /dev/null +++ b/drivers/extcon/extcon-qcom-spmi-misc.c @@ -0,0 +1,170 @@ +/** + * extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID + * detection based on extcon-usb-gpio.c. + * + * Copyright (C) 2016 Linaro, Ltd. + * Stephen Boyd <stephen.boyd@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/extcon.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#define USB_ID_DEBOUNCE_MS 5 /* ms */ + +struct qcom_usb_extcon_info { + struct extcon_dev *edev; + int irq; + struct delayed_work wq_detcable; + unsigned long debounce_jiffies; +}; + +static const unsigned int qcom_usb_extcon_cable[] = { + EXTCON_USB_HOST, + EXTCON_NONE, +}; + +static void qcom_usb_extcon_detect_cable(struct work_struct *work) +{ + bool id; + int ret; + struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work), + struct qcom_usb_extcon_info, + wq_detcable); + + /* check ID and update cable state */ + ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id); + if (ret) + return; + + extcon_set_state(info->edev, EXTCON_USB_HOST, !id); +} + +static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id) +{ + struct qcom_usb_extcon_info *info = dev_id; + + queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, + info->debounce_jiffies); + + return IRQ_HANDLED; +} + +static int qcom_usb_extcon_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qcom_usb_extcon_info *info; + int ret; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->edev = devm_extcon_dev_allocate(dev, qcom_usb_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + + ret = devm_extcon_dev_register(dev, info->edev); + if (ret < 0) { + dev_err(dev, "failed to register extcon device\n"); + return ret; + } + + info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS); + INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable); + + info->irq = platform_get_irq_byname(pdev, "usb_id"); + if (info->irq < 0) + return info->irq; + + ret = devm_request_threaded_irq(dev, info->irq, NULL, + qcom_usb_irq_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + pdev->name, info); + if (ret < 0) { + dev_err(dev, "failed to request handler for ID IRQ\n"); + return ret; + } + + platform_set_drvdata(pdev, info); + device_init_wakeup(dev, 1); + + /* Perform initial detection */ + qcom_usb_extcon_detect_cable(&info->wq_detcable.work); + + return 0; +} + +static int qcom_usb_extcon_remove(struct platform_device *pdev) +{ + struct qcom_usb_extcon_info *info = platform_get_drvdata(pdev); + + cancel_delayed_work_sync(&info->wq_detcable); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int qcom_usb_extcon_suspend(struct device *dev) +{ + struct qcom_usb_extcon_info *info = dev_get_drvdata(dev); + int ret = 0; + + if (device_may_wakeup(dev)) + ret = enable_irq_wake(info->irq); + + return ret; +} + +static int qcom_usb_extcon_resume(struct device *dev) +{ + struct qcom_usb_extcon_info *info = dev_get_drvdata(dev); + int ret = 0; + + if (device_may_wakeup(dev)) + ret = disable_irq_wake(info->irq); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(qcom_usb_extcon_pm_ops, + qcom_usb_extcon_suspend, qcom_usb_extcon_resume); + +static const struct of_device_id qcom_usb_extcon_dt_match[] = { + { .compatible = "qcom,pm8941-misc", }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_usb_extcon_dt_match); + +static struct platform_driver qcom_usb_extcon_driver = { + .probe = qcom_usb_extcon_probe, + .remove = qcom_usb_extcon_remove, + .driver = { + .name = "extcon-pm8941-misc", + .pm = &qcom_usb_extcon_pm_ops, + .of_match_table = qcom_usb_extcon_dt_match, + }, +}; +module_platform_driver(qcom_usb_extcon_driver); + +MODULE_DESCRIPTION("QCOM USB ID extcon driver"); +MODULE_AUTHOR("Stephen Boyd <stephen.boyd@linaro.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c index 97e074d70eca..174c388739ea 100644 --- a/drivers/extcon/extcon-rt8973a.c +++ b/drivers/extcon/extcon-rt8973a.c @@ -398,9 +398,9 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info, return ret; /* Change the state of external accessory */ - extcon_set_cable_state_(info->edev, id, attached); + extcon_set_state_sync(info->edev, id, attached); if (id == EXTCON_USB) - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, attached); return 0; diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c index df769a17e736..b22325688503 100644 --- a/drivers/extcon/extcon-sm5502.c +++ b/drivers/extcon/extcon-sm5502.c @@ -411,9 +411,9 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info, return ret; /* Change the state of external accessory */ - extcon_set_cable_state_(info->edev, id, attached); + extcon_set_state_sync(info->edev, id, attached); if (id == EXTCON_USB) - extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP, + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, attached); return 0; diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c index 2512660dc4b9..a27d350f69e3 100644 --- a/drivers/extcon/extcon-usb-gpio.c +++ b/drivers/extcon/extcon-usb-gpio.c @@ -63,16 +63,16 @@ static void usb_extcon_detect_cable(struct work_struct *work) * As we don't have event for USB peripheral cable attached, * we simulate USB peripheral attach here. */ - extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false); - extcon_set_cable_state_(info->edev, EXTCON_USB, true); + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false); + extcon_set_state_sync(info->edev, EXTCON_USB, true); } else { /* * ID = 0 means USB HOST cable attached. * As we don't have event for USB peripheral cable detached, * we simulate USB peripheral detach here. */ - extcon_set_cable_state_(info->edev, EXTCON_USB, false); - extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true); + extcon_set_state_sync(info->edev, EXTCON_USB, false); + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true); } } diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index 8682efc0f57b..78298460d168 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -38,43 +38,159 @@ #define SUPPORTED_CABLE_MAX 32 #define CABLE_NAME_MAX 30 -static const char *extcon_name[] = { - [EXTCON_NONE] = "NONE", +struct __extcon_info { + unsigned int type; + unsigned int id; + const char *name; + +} extcon_info[] = { + [EXTCON_NONE] = { + .type = EXTCON_TYPE_MISC, + .id = EXTCON_NONE, + .name = "NONE", + }, /* USB external connector */ - [EXTCON_USB] = "USB", - [EXTCON_USB_HOST] = "USB-HOST", + [EXTCON_USB] = { + .type = EXTCON_TYPE_USB, + .id = EXTCON_USB, + .name = "USB", + }, + [EXTCON_USB_HOST] = { + .type = EXTCON_TYPE_USB, + .id = EXTCON_USB_HOST, + .name = "USB_HOST", + }, /* Charging external connector */ - [EXTCON_CHG_USB_SDP] = "SDP", - [EXTCON_CHG_USB_DCP] = "DCP", - [EXTCON_CHG_USB_CDP] = "CDP", - [EXTCON_CHG_USB_ACA] = "ACA", - [EXTCON_CHG_USB_FAST] = "FAST-CHARGER", - [EXTCON_CHG_USB_SLOW] = "SLOW-CHARGER", + [EXTCON_CHG_USB_SDP] = { + .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB, + .id = EXTCON_CHG_USB_SDP, + .name = "SDP", + }, + [EXTCON_CHG_USB_DCP] = { + .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB, + .id = EXTCON_CHG_USB_DCP, + .name = "DCP", + }, + [EXTCON_CHG_USB_CDP] = { + .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB, + .id = EXTCON_CHG_USB_CDP, + .name = "CDP", + }, + [EXTCON_CHG_USB_ACA] = { + .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB, + .id = EXTCON_CHG_USB_ACA, + .name = "ACA", + }, + [EXTCON_CHG_USB_FAST] = { + .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB, + .id = EXTCON_CHG_USB_FAST, + .name = "FAST-CHARGER", + }, + [EXTCON_CHG_USB_SLOW] = { + .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB, + .id = EXTCON_CHG_USB_SLOW, + .name = "SLOW-CHARGER", + }, + [EXTCON_CHG_WPT] = { + .type = EXTCON_TYPE_CHG, + .id = EXTCON_CHG_WPT, + .name = "WPT", + }, /* Jack external connector */ - [EXTCON_JACK_MICROPHONE] = "MICROPHONE", - [EXTCON_JACK_HEADPHONE] = "HEADPHONE", - [EXTCON_JACK_LINE_IN] = "LINE-IN", - [EXTCON_JACK_LINE_OUT] = "LINE-OUT", - [EXTCON_JACK_VIDEO_IN] = "VIDEO-IN", - [EXTCON_JACK_VIDEO_OUT] = "VIDEO-OUT", - [EXTCON_JACK_SPDIF_IN] = "SPDIF-IN", - [EXTCON_JACK_SPDIF_OUT] = "SPDIF-OUT", + [EXTCON_JACK_MICROPHONE] = { + .type = EXTCON_TYPE_JACK, + .id = EXTCON_JACK_MICROPHONE, + .name = "MICROPHONE", + }, + [EXTCON_JACK_HEADPHONE] = { + .type = EXTCON_TYPE_JACK, + .id = EXTCON_JACK_HEADPHONE, + .name = "HEADPHONE", + }, + [EXTCON_JACK_LINE_IN] = { + .type = EXTCON_TYPE_JACK, + .id = EXTCON_JACK_LINE_IN, + .name = "LINE-IN", + }, + [EXTCON_JACK_LINE_OUT] = { + .type = EXTCON_TYPE_JACK, + .id = EXTCON_JACK_LINE_OUT, + .name = "LINE-OUT", + }, + [EXTCON_JACK_VIDEO_IN] = { + .type = EXTCON_TYPE_JACK, + .id = EXTCON_JACK_VIDEO_IN, + .name = "VIDEO-IN", + }, + [EXTCON_JACK_VIDEO_OUT] = { + .type = EXTCON_TYPE_JACK, + .id = EXTCON_JACK_VIDEO_OUT, + .name = "VIDEO-OUT", + }, + [EXTCON_JACK_SPDIF_IN] = { + .type = EXTCON_TYPE_JACK, + .id = EXTCON_JACK_SPDIF_IN, + .name = "SPDIF-IN", + }, + [EXTCON_JACK_SPDIF_OUT] = { + .type = EXTCON_TYPE_JACK, + .id = EXTCON_JACK_SPDIF_OUT, + .name = "SPDIF-OUT", + }, /* Display external connector */ - [EXTCON_DISP_HDMI] = "HDMI", - [EXTCON_DISP_MHL] = "MHL", - [EXTCON_DISP_DVI] = "DVI", - [EXTCON_DISP_VGA] = "VGA", + [EXTCON_DISP_HDMI] = { + .type = EXTCON_TYPE_DISP, + .id = EXTCON_DISP_HDMI, + .name = "HDMI", + }, + [EXTCON_DISP_MHL] = { + .type = EXTCON_TYPE_DISP, + .id = EXTCON_DISP_MHL, + .name = "MHL", + }, + [EXTCON_DISP_DVI] = { + .type = EXTCON_TYPE_DISP, + .id = EXTCON_DISP_DVI, + .name = "DVI", + }, + [EXTCON_DISP_VGA] = { + .type = EXTCON_TYPE_DISP, + .id = EXTCON_DISP_VGA, + .name = "VGA", + }, + [EXTCON_DISP_DP] = { + .type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB, + .id = EXTCON_DISP_DP, + .name = "DP", + }, + [EXTCON_DISP_HMD] = { + .type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB, + .id = EXTCON_DISP_HMD, + .name = "HMD", + }, /* Miscellaneous external connector */ - [EXTCON_DOCK] = "DOCK", - [EXTCON_JIG] = "JIG", - [EXTCON_MECHANICAL] = "MECHANICAL", - - NULL, + [EXTCON_DOCK] = { + .type = EXTCON_TYPE_MISC, + .id = EXTCON_DOCK, + .name = "DOCK", + }, + [EXTCON_JIG] = { + .type = EXTCON_TYPE_MISC, + .id = EXTCON_JIG, + .name = "JIG", + }, + [EXTCON_MECHANICAL] = { + .type = EXTCON_TYPE_MISC, + .id = EXTCON_MECHANICAL, + .name = "MECHANICAL", + }, + + { /* sentinel */ } }; /** @@ -95,6 +211,16 @@ struct extcon_cable { struct device_attribute attr_state; struct attribute *attrs[3]; /* to be fed to attr_g.attrs */ + + union extcon_property_value usb_propval[EXTCON_PROP_USB_CNT]; + union extcon_property_value chg_propval[EXTCON_PROP_CHG_CNT]; + union extcon_property_value jack_propval[EXTCON_PROP_JACK_CNT]; + union extcon_property_value disp_propval[EXTCON_PROP_DISP_CNT]; + + unsigned long usb_bits[BITS_TO_LONGS(EXTCON_PROP_USB_CNT)]; + unsigned long chg_bits[BITS_TO_LONGS(EXTCON_PROP_CHG_CNT)]; + unsigned long jack_bits[BITS_TO_LONGS(EXTCON_PROP_JACK_CNT)]; + unsigned long disp_bits[BITS_TO_LONGS(EXTCON_PROP_DISP_CNT)]; }; static struct class *extcon_class; @@ -147,14 +273,93 @@ static int find_cable_index_by_id(struct extcon_dev *edev, const unsigned int id return -EINVAL; } -static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached) +static int get_extcon_type(unsigned int prop) { - if (((prev >> idx) & 0x1) != ((new >> idx) & 0x1)) { - *attached = ((new >> idx) & 0x1) ? true : false; - return true; + switch (prop) { + case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX: + return EXTCON_TYPE_USB; + case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX: + return EXTCON_TYPE_CHG; + case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX: + return EXTCON_TYPE_JACK; + case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX: + return EXTCON_TYPE_DISP; + default: + return -EINVAL; } +} + +static bool is_extcon_attached(struct extcon_dev *edev, unsigned int index) +{ + return !!(edev->state & BIT(index)); +} + +static bool is_extcon_changed(struct extcon_dev *edev, int index, + bool new_state) +{ + int state = !!(edev->state & BIT(index)); + return (state != new_state); +} + +static bool is_extcon_property_supported(unsigned int id, unsigned int prop) +{ + int type; + + /* Check whether the property is supported or not. */ + type = get_extcon_type(prop); + if (type < 0) + return false; - return false; + /* Check whether a specific extcon id supports the property or not. */ + return !!(extcon_info[id].type & type); +} + +static int is_extcon_property_capability(struct extcon_dev *edev, + unsigned int id, int index,unsigned int prop) +{ + struct extcon_cable *cable; + int type, ret; + + /* Check whether the property is supported or not. */ + type = get_extcon_type(prop); + if (type < 0) + return type; + + cable = &edev->cables[index]; + + switch (type) { + case EXTCON_TYPE_USB: + ret = test_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits); + break; + case EXTCON_TYPE_CHG: + ret = test_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits); + break; + case EXTCON_TYPE_JACK: + ret = test_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits); + break; + case EXTCON_TYPE_DISP: + ret = test_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void init_property(struct extcon_dev *edev, unsigned int id, int index) +{ + unsigned int type = extcon_info[id].type; + struct extcon_cable *cable = &edev->cables[index]; + + if (EXTCON_TYPE_USB & type) + memset(cable->usb_propval, 0, sizeof(cable->usb_propval)); + if (EXTCON_TYPE_CHG & type) + memset(cable->chg_propval, 0, sizeof(cable->chg_propval)); + if (EXTCON_TYPE_JACK & type) + memset(cable->jack_propval, 0, sizeof(cable->jack_propval)); + if (EXTCON_TYPE_DISP & type) + memset(cable->disp_propval, 0, sizeof(cable->disp_propval)); } static ssize_t state_show(struct device *dev, struct device_attribute *attr, @@ -168,32 +373,13 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr, for (i = 0; i < edev->max_supported; i++) { count += sprintf(buf + count, "%s=%d\n", - extcon_name[edev->supported_cable[i]], + extcon_info[edev->supported_cable[i]].name, !!(edev->state & (1 << i))); } return count; } - -static ssize_t state_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - u32 state; - ssize_t ret = 0; - struct extcon_dev *edev = dev_get_drvdata(dev); - - ret = sscanf(buf, "0x%x", &state); - if (ret == 0) - ret = -EINVAL; - else - ret = extcon_set_state(edev, state); - - if (ret < 0) - return ret; - - return count; -} -static DEVICE_ATTR_RW(state); +static DEVICE_ATTR_RO(state); static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -212,7 +398,7 @@ static ssize_t cable_name_show(struct device *dev, int i = cable->cable_index; return sprintf(buf, "%s\n", - extcon_name[cable->edev->supported_cable[i]]); + extcon_info[cable->edev->supported_cable[i]].name); } static ssize_t cable_state_show(struct device *dev, @@ -224,26 +410,17 @@ static ssize_t cable_state_show(struct device *dev, int i = cable->cable_index; return sprintf(buf, "%d\n", - extcon_get_cable_state_(cable->edev, - cable->edev->supported_cable[i])); + extcon_get_state(cable->edev, cable->edev->supported_cable[i])); } /** - * extcon_update_state() - Update the cable attach states of the extcon device - * only for the masked bits. - * @edev: the extcon device - * @mask: the bit mask to designate updated bits. - * @state: new cable attach status for @edev - * - * Changing the state sends uevent with environment variable containing - * the name of extcon device (envp[0]) and the state output (envp[1]). - * Tizen uses this format for extcon device to get events from ports. - * Android uses this format as well. + * extcon_sync() - Synchronize the states for both the attached/detached + * @edev: the extcon device that has the cable. * - * Note that the notifier provides which bits are changed in the state - * variable with the val parameter (second) to the callback. + * This function send a notification to synchronize the all states of a + * specific external connector */ -int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state) +int extcon_sync(struct extcon_dev *edev, unsigned int id) { char name_buf[120]; char state_buf[120]; @@ -252,100 +429,102 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state) int env_offset = 0; int length; int index; + int state; unsigned long flags; - bool attached; if (!edev) return -EINVAL; - spin_lock_irqsave(&edev->lock, flags); + index = find_cable_index_by_id(edev, id); + if (index < 0) + return index; - if (edev->state != ((edev->state & ~mask) | (state & mask))) { - u32 old_state; + spin_lock_irqsave(&edev->lock, flags); - if (check_mutually_exclusive(edev, (edev->state & ~mask) | - (state & mask))) { - spin_unlock_irqrestore(&edev->lock, flags); - return -EPERM; - } + state = !!(edev->state & BIT(index)); + raw_notifier_call_chain(&edev->nh[index], state, edev); - old_state = edev->state; - edev->state &= ~mask; - edev->state |= state & mask; + /* This could be in interrupt handler */ + prop_buf = (char *)get_zeroed_page(GFP_ATOMIC); + if (!prop_buf) { + /* Unlock early before uevent */ + spin_unlock_irqrestore(&edev->lock, flags); - for (index = 0; index < edev->max_supported; index++) { - if (is_extcon_changed(old_state, edev->state, index, - &attached)) - raw_notifier_call_chain(&edev->nh[index], - attached, edev); - } + dev_err(&edev->dev, "out of memory in extcon_set_state\n"); + kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE); - /* This could be in interrupt handler */ - prop_buf = (char *)get_zeroed_page(GFP_ATOMIC); - if (prop_buf) { - length = name_show(&edev->dev, NULL, prop_buf); - if (length > 0) { - if (prop_buf[length - 1] == '\n') - prop_buf[length - 1] = 0; - snprintf(name_buf, sizeof(name_buf), - "NAME=%s", prop_buf); - envp[env_offset++] = name_buf; - } - length = state_show(&edev->dev, NULL, prop_buf); - if (length > 0) { - if (prop_buf[length - 1] == '\n') - prop_buf[length - 1] = 0; - snprintf(state_buf, sizeof(state_buf), - "STATE=%s", prop_buf); - envp[env_offset++] = state_buf; - } - envp[env_offset] = NULL; - /* Unlock early before uevent */ - spin_unlock_irqrestore(&edev->lock, flags); + return 0; + } - kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp); - free_page((unsigned long)prop_buf); - } else { - /* Unlock early before uevent */ - spin_unlock_irqrestore(&edev->lock, flags); + length = name_show(&edev->dev, NULL, prop_buf); + if (length > 0) { + if (prop_buf[length - 1] == '\n') + prop_buf[length - 1] = 0; + snprintf(name_buf, sizeof(name_buf), "NAME=%s", prop_buf); + envp[env_offset++] = name_buf; + } - dev_err(&edev->dev, "out of memory in extcon_set_state\n"); - kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE); - } - } else { - /* No changes */ - spin_unlock_irqrestore(&edev->lock, flags); + length = state_show(&edev->dev, NULL, prop_buf); + if (length > 0) { + if (prop_buf[length - 1] == '\n') + prop_buf[length - 1] = 0; + snprintf(state_buf, sizeof(state_buf), "STATE=%s", prop_buf); + envp[env_offset++] = state_buf; } + envp[env_offset] = NULL; + + /* Unlock early before uevent */ + spin_unlock_irqrestore(&edev->lock, flags); + kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp); + free_page((unsigned long)prop_buf); return 0; } -EXPORT_SYMBOL_GPL(extcon_update_state); +EXPORT_SYMBOL_GPL(extcon_sync); /** - * extcon_set_state() - Set the cable attach states of the extcon device. - * @edev: the extcon device - * @state: new cable attach status for @edev - * - * Note that notifier provides which bits are changed in the state - * variable with the val parameter (second) to the callback. + * extcon_get_state() - Get the state of a external connector. + * @edev: the extcon device that has the cable. + * @id: the unique id of each external connector in extcon enumeration. */ -int extcon_set_state(struct extcon_dev *edev, u32 state) +int extcon_get_state(struct extcon_dev *edev, const unsigned int id) { + int index, state; + unsigned long flags; + if (!edev) return -EINVAL; - return extcon_update_state(edev, 0xffffffff, state); + index = find_cable_index_by_id(edev, id); + if (index < 0) + return index; + + spin_lock_irqsave(&edev->lock, flags); + state = is_extcon_attached(edev, index); + spin_unlock_irqrestore(&edev->lock, flags); + + return state; } -EXPORT_SYMBOL_GPL(extcon_set_state); +EXPORT_SYMBOL_GPL(extcon_get_state); /** - * extcon_get_cable_state_() - Get the status of a specific cable. - * @edev: the extcon device that has the cable. - * @id: the unique id of each external connector in extcon enumeration. + * extcon_set_state() - Set the state of a external connector. + * without a notification. + * @edev: the extcon device that has the cable. + * @id: the unique id of each external connector + * in extcon enumeration. + * @state: the new cable status. The default semantics is + * true: attached / false: detached. + * + * This function only set the state of a external connector without + * a notification. To synchronize the data of a external connector, + * use extcon_set_state_sync() and extcon_sync(). */ -int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id) +int extcon_set_state(struct extcon_dev *edev, unsigned int id, + bool cable_state) { - int index; + unsigned long flags; + int index, ret = 0; if (!edev) return -EINVAL; @@ -354,41 +533,338 @@ int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id) if (index < 0) return index; - if (edev->max_supported && edev->max_supported <= index) - return -EINVAL; + spin_lock_irqsave(&edev->lock, flags); + + /* Check whether the external connector's state is changed. */ + if (!is_extcon_changed(edev, index, cable_state)) + goto out; + + if (check_mutually_exclusive(edev, + (edev->state & ~BIT(index)) | (cable_state & BIT(index)))) { + ret = -EPERM; + goto out; + } + + /* + * Initialize the value of extcon property before setting + * the detached state for an external connector. + */ + if (!cable_state) + init_property(edev, id, index); + + /* Update the state for a external connector. */ + if (cable_state) + edev->state |= BIT(index); + else + edev->state &= ~(BIT(index)); +out: + spin_unlock_irqrestore(&edev->lock, flags); - return !!(edev->state & (1 << index)); + return ret; } -EXPORT_SYMBOL_GPL(extcon_get_cable_state_); +EXPORT_SYMBOL_GPL(extcon_set_state); /** - * extcon_set_cable_state_() - Set the status of a specific cable. + * extcon_set_state_sync() - Set the state of a external connector + * with a notification. * @edev: the extcon device that has the cable. * @id: the unique id of each external connector * in extcon enumeration. * @state: the new cable status. The default semantics is * true: attached / false: detached. + * + * This function set the state of external connector and synchronize the data + * by usning a notification. */ -int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id, +int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id, bool cable_state) { - u32 state; + int ret, index; + unsigned long flags; + + index = find_cable_index_by_id(edev, id); + if (index < 0) + return index; + + /* Check whether the external connector's state is changed. */ + spin_lock_irqsave(&edev->lock, flags); + ret = is_extcon_changed(edev, index, cable_state); + spin_unlock_irqrestore(&edev->lock, flags); + if (!ret) + return 0; + + ret = extcon_set_state(edev, id, cable_state); + if (ret < 0) + return ret; + + return extcon_sync(edev, id); +} +EXPORT_SYMBOL_GPL(extcon_set_state_sync); + +/** + * extcon_get_property() - Get the property value of a specific cable. + * @edev: the extcon device that has the cable. + * @id: the unique id of each external connector + * in extcon enumeration. + * @prop: the property id among enum extcon_property. + * @prop_val: the pointer which store the value of property. + * + * When getting the property value of external connector, the external connector + * should be attached. If detached state, function just return 0 without + * property value. Also, the each property should be included in the list of + * supported properties according to the type of external connectors. + * + * Returns 0 if success or error number if fail + */ +int extcon_get_property(struct extcon_dev *edev, unsigned int id, + unsigned int prop, + union extcon_property_value *prop_val) +{ + struct extcon_cable *cable; + unsigned long flags; + int index, ret = 0; + + *prop_val = (union extcon_property_value)(0); + + if (!edev) + return -EINVAL; + + /* Check whether the property is supported or not */ + if (!is_extcon_property_supported(id, prop)) + return -EINVAL; + + /* Find the cable index of external connector by using id */ + index = find_cable_index_by_id(edev, id); + if (index < 0) + return index; + + spin_lock_irqsave(&edev->lock, flags); + + /* Check whether the property is available or not. */ + if (!is_extcon_property_capability(edev, id, index, prop)) { + spin_unlock_irqrestore(&edev->lock, flags); + return -EPERM; + } + + /* + * Check whether the external connector is attached. + * If external connector is detached, the user can not + * get the property value. + */ + if (!is_extcon_attached(edev, index)) { + spin_unlock_irqrestore(&edev->lock, flags); + return 0; + } + + cable = &edev->cables[index]; + + /* Get the property value according to extcon type */ + switch (prop) { + case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX: + *prop_val = cable->usb_propval[prop - EXTCON_PROP_USB_MIN]; + break; + case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX: + *prop_val = cable->chg_propval[prop - EXTCON_PROP_CHG_MIN]; + break; + case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX: + *prop_val = cable->jack_propval[prop - EXTCON_PROP_JACK_MIN]; + break; + case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX: + *prop_val = cable->disp_propval[prop - EXTCON_PROP_DISP_MIN]; + break; + default: + ret = -EINVAL; + break; + } + + spin_unlock_irqrestore(&edev->lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(extcon_get_property); + +/** + * extcon_set_property() - Set the property value of a specific cable. + * @edev: the extcon device that has the cable. + * @id: the unique id of each external connector + * in extcon enumeration. + * @prop: the property id among enum extcon_property. + * @prop_val: the pointer including the new value of property. + * + * The each property should be included in the list of supported properties + * according to the type of external connectors. + * + * Returns 0 if success or error number if fail + */ +int extcon_set_property(struct extcon_dev *edev, unsigned int id, + unsigned int prop, + union extcon_property_value prop_val) +{ + struct extcon_cable *cable; + unsigned long flags; + int index, ret = 0; + + if (!edev) + return -EINVAL; + + /* Check whether the property is supported or not */ + if (!is_extcon_property_supported(id, prop)) + return -EINVAL; + + /* Find the cable index of external connector by using id */ + index = find_cable_index_by_id(edev, id); + if (index < 0) + return index; + + spin_lock_irqsave(&edev->lock, flags); + + /* Check whether the property is available or not. */ + if (!is_extcon_property_capability(edev, id, index, prop)) { + spin_unlock_irqrestore(&edev->lock, flags); + return -EPERM; + } + + cable = &edev->cables[index]; + + /* Set the property value according to extcon type */ + switch (prop) { + case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX: + cable->usb_propval[prop - EXTCON_PROP_USB_MIN] = prop_val; + break; + case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX: + cable->chg_propval[prop - EXTCON_PROP_CHG_MIN] = prop_val; + break; + case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX: + cable->jack_propval[prop - EXTCON_PROP_JACK_MIN] = prop_val; + break; + case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX: + cable->disp_propval[prop - EXTCON_PROP_DISP_MIN] = prop_val; + break; + default: + ret = -EINVAL; + break; + } + + spin_unlock_irqrestore(&edev->lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(extcon_set_property); + +/** + * extcon_set_property_sync() - Set the property value of a specific cable + with a notification. + * @prop_val: the pointer including the new value of property. + * + * When setting the property value of external connector, the external connector + * should be attached. The each property should be included in the list of + * supported properties according to the type of external connectors. + * + * Returns 0 if success or error number if fail + */ +int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id, + unsigned int prop, + union extcon_property_value prop_val) +{ + int ret; + + ret = extcon_set_property(edev, id, prop, prop_val); + if (ret < 0) + return ret; + + return extcon_sync(edev, id); +} +EXPORT_SYMBOL_GPL(extcon_set_property_sync); + +/** + * extcon_get_property_capability() - Get the capability of property + * of an external connector. + * @edev: the extcon device that has the cable. + * @id: the unique id of each external connector + * in extcon enumeration. + * @prop: the property id among enum extcon_property. + * + * Returns 1 if the property is available or 0 if not available. + */ +int extcon_get_property_capability(struct extcon_dev *edev, unsigned int id, + unsigned int prop) +{ int index; if (!edev) return -EINVAL; + /* Check whether the property is supported or not */ + if (!is_extcon_property_supported(id, prop)) + return -EINVAL; + + /* Find the cable index of external connector by using id */ index = find_cable_index_by_id(edev, id); if (index < 0) return index; - if (edev->max_supported && edev->max_supported <= index) + return is_extcon_property_capability(edev, id, index, prop); +} +EXPORT_SYMBOL_GPL(extcon_get_property_capability); + +/** + * extcon_set_property_capability() - Set the capability of a property + * of an external connector. + * @edev: the extcon device that has the cable. + * @id: the unique id of each external connector + * in extcon enumeration. + * @prop: the property id among enum extcon_property. + * + * This function set the capability of a property for an external connector + * to mark the bit in capability bitmap which mean the available state of + * a property. + * + * Returns 0 if success or error number if fail + */ +int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id, + unsigned int prop) +{ + struct extcon_cable *cable; + int index, type, ret = 0; + + if (!edev) return -EINVAL; - state = cable_state ? (1 << index) : 0; - return extcon_update_state(edev, 1 << index, state); + /* Check whether the property is supported or not. */ + if (!is_extcon_property_supported(id, prop)) + return -EINVAL; + + /* Find the cable index of external connector by using id. */ + index = find_cable_index_by_id(edev, id); + if (index < 0) + return index; + + type = get_extcon_type(prop); + if (type < 0) + return type; + + cable = &edev->cables[index]; + + switch (type) { + case EXTCON_TYPE_USB: + __set_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits); + break; + case EXTCON_TYPE_CHG: + __set_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits); + break; + case EXTCON_TYPE_JACK: + __set_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits); + break; + case EXTCON_TYPE_DISP: + __set_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits); + break; + default: + ret = -EINVAL; + } + + return ret; } -EXPORT_SYMBOL_GPL(extcon_set_cable_state_); +EXPORT_SYMBOL_GPL(extcon_set_property_capability); /** * extcon_get_extcon_dev() - Get the extcon device instance from the name @@ -428,7 +904,7 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id, struct notifier_block *nb) { unsigned long flags; - int ret, idx; + int ret, idx = -EINVAL; if (!nb) return -EINVAL; @@ -846,13 +1322,13 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index) return ERR_PTR(-EINVAL); if (!dev->of_node) { - dev_err(dev, "device does not have a device node entry\n"); + dev_dbg(dev, "device does not have a device node entry\n"); return ERR_PTR(-EINVAL); } node = of_parse_phandle(dev->of_node, "extcon", index); if (!node) { - dev_err(dev, "failed to get phandle in %s node\n", + dev_dbg(dev, "failed to get phandle in %s node\n", dev->of_node->full_name); return ERR_PTR(-ENODEV); } diff --git a/drivers/media/dvb-frontends/rtl2832_sdr.c b/drivers/media/dvb-frontends/rtl2832_sdr.c index 6e22af36b637..e038e886731b 100644 --- a/drivers/media/dvb-frontends/rtl2832_sdr.c +++ b/drivers/media/dvb-frontends/rtl2832_sdr.c @@ -392,7 +392,6 @@ static int rtl2832_sdr_alloc_urbs(struct rtl2832_sdr_dev *dev) dev_dbg(&pdev->dev, "alloc urb=%d\n", i); dev->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); if (!dev->urb_list[i]) { - dev_dbg(&pdev->dev, "failed\n"); for (j = 0; j < i; j++) usb_free_urb(dev->urb_list[j]); return -ENOMEM; diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c index 091d793f6583..4b132c29f290 100644 --- a/drivers/media/radio/si470x/radio-si470x-usb.c +++ b/drivers/media/radio/si470x/radio-si470x-usb.c @@ -627,7 +627,6 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, radio->int_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (!radio->int_in_urb) { - dev_info(&intf->dev, "could not allocate int_in_urb"); retval = -ENOMEM; goto err_intbuffer; } diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 65f80b8b9f7a..86cc70fe2534 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -2211,16 +2211,11 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf, goto exit; } rx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!rx_urb) { - dev_err(dev, "%s: usb_alloc_urb failed for IR urb", __func__); + if (!rx_urb) goto rx_urb_alloc_failed; - } tx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!tx_urb) { - dev_err(dev, "%s: usb_alloc_urb failed for display urb", - __func__); + if (!tx_urb) goto tx_urb_alloc_failed; - } mutex_init(&ictx->lock); spin_lock_init(&ictx->kc_lock); @@ -2305,10 +2300,8 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf, int ret = -ENOMEM; rx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!rx_urb) { - pr_err("usb_alloc_urb failed for IR urb\n"); + if (!rx_urb) goto rx_urb_alloc_failed; - } mutex_lock(&ictx->lock); diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index 399f44d89a29..ec8016d9b009 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -970,10 +970,8 @@ static int redrat3_dev_probe(struct usb_interface *intf, /* set up bulk-in endpoint */ rr3->read_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!rr3->read_urb) { - dev_err(dev, "Read urb allocation failure\n"); + if (!rr3->read_urb) goto error; - } rr3->ep_in = ep_in; rr3->bulk_in_buf = usb_alloc_coherent(udev, diff --git a/drivers/media/usb/airspy/airspy.c b/drivers/media/usb/airspy/airspy.c index fe031b06935f..3c556ee306cd 100644 --- a/drivers/media/usb/airspy/airspy.c +++ b/drivers/media/usb/airspy/airspy.c @@ -426,7 +426,6 @@ static int airspy_alloc_urbs(struct airspy *s) dev_dbg(s->dev, "alloc urb=%d\n", i); s->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); if (!s->urb_list[i]) { - dev_dbg(s->dev, "failed\n"); for (j = 0; j < i; j++) usb_free_urb(s->urb_list[j]); return -ENOMEM; diff --git a/drivers/media/usb/as102/as102_usb_drv.c b/drivers/media/usb/as102/as102_usb_drv.c index 0e8030c071b8..68c3a80ce349 100644 --- a/drivers/media/usb/as102/as102_usb_drv.c +++ b/drivers/media/usb/as102/as102_usb_drv.c @@ -270,8 +270,6 @@ static int as102_alloc_usb_stream_buffer(struct as102_dev_t *dev) urb = usb_alloc_urb(0, GFP_ATOMIC); if (urb == NULL) { - dev_dbg(&dev->bus_adap.usb_dev->dev, - "%s: usb_alloc_urb failed\n", __func__); as102_free_usb_stream_buffer(dev); return -ENOMEM; } diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c index 82b026985868..13b8387082f2 100644 --- a/drivers/media/usb/au0828/au0828-video.c +++ b/drivers/media/usb/au0828/au0828-video.c @@ -245,7 +245,6 @@ static int au0828_init_isoc(struct au0828_dev *dev, int max_packets, for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { urb = usb_alloc_urb(max_packets, GFP_KERNEL); if (!urb) { - au0828_isocdbg("cannot alloc isoc_ctl.urb %i\n", i); au0828_uninit_isoc(dev); return -ENOMEM; } diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c index c1aa1ab2ece9..13620cdf0599 100644 --- a/drivers/media/usb/cpia2/cpia2_usb.c +++ b/drivers/media/usb/cpia2/cpia2_usb.c @@ -662,7 +662,6 @@ static int submit_urbs(struct camera_data *cam) } urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); if (!urb) { - ERR("%s: usb_alloc_urb error!\n", __func__); for (j = 0; j < i; j++) usb_free_urb(cam->sbuf[j].urb); return -ENOMEM; diff --git a/drivers/media/usb/cx231xx/cx231xx-audio.c b/drivers/media/usb/cx231xx/cx231xx-audio.c index a6a9508418f8..4cd5fa91612f 100644 --- a/drivers/media/usb/cx231xx/cx231xx-audio.c +++ b/drivers/media/usb/cx231xx/cx231xx-audio.c @@ -293,7 +293,6 @@ static int cx231xx_init_audio_isoc(struct cx231xx *dev) memset(dev->adev.transfer_buffer[i], 0x80, sb_size); urb = usb_alloc_urb(CX231XX_ISO_NUM_AUDIO_PACKETS, GFP_ATOMIC); if (!urb) { - dev_err(dev->dev, "usb_alloc_urb failed!\n"); for (j = 0; j < i; j++) { usb_free_urb(dev->adev.urb[j]); kfree(dev->adev.transfer_buffer[j]); @@ -355,7 +354,6 @@ static int cx231xx_init_audio_bulk(struct cx231xx *dev) memset(dev->adev.transfer_buffer[i], 0x80, sb_size); urb = usb_alloc_urb(CX231XX_NUM_AUDIO_PACKETS, GFP_ATOMIC); if (!urb) { - dev_err(dev->dev, "usb_alloc_urb failed!\n"); for (j = 0; j < i; j++) { usb_free_urb(dev->adev.urb[j]); kfree(dev->adev.transfer_buffer[j]); diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c index 630f4fc5155f..8ec05cb306d8 100644 --- a/drivers/media/usb/cx231xx/cx231xx-core.c +++ b/drivers/media/usb/cx231xx/cx231xx-core.c @@ -1035,8 +1035,6 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets, for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) { urb = usb_alloc_urb(max_packets, GFP_KERNEL); if (!urb) { - dev_err(dev->dev, - "cannot alloc isoc_ctl.urb %i\n", i); cx231xx_uninit_isoc(dev); return -ENOMEM; } @@ -1172,8 +1170,6 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets, for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) { urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { - dev_err(dev->dev, - "cannot alloc bulk_ctl.urb %i\n", i); cx231xx_uninit_bulk(dev); return -ENOMEM; } diff --git a/drivers/media/usb/cx231xx/cx231xx-vbi.c b/drivers/media/usb/cx231xx/cx231xx-vbi.c index 15bb573b78ac..76e901920f6f 100644 --- a/drivers/media/usb/cx231xx/cx231xx-vbi.c +++ b/drivers/media/usb/cx231xx/cx231xx-vbi.c @@ -442,8 +442,6 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets, urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { - dev_err(dev->dev, - "cannot alloc bulk_ctl.urb %i\n", i); cx231xx_uninit_vbi_isoc(dev); return -ENOMEM; } diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index bf890c3d9cda..26797979ebce 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -783,10 +783,8 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf) /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */ purb = usb_alloc_urb(0, GFP_KERNEL); - if (purb == NULL) { - err("rc usb alloc urb failed"); + if (purb == NULL) return -ENOMEM; - } purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL); if (purb->transfer_buffer == NULL) { diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c index 49a5f9532bd8..78f3687772bf 100644 --- a/drivers/media/usb/em28xx/em28xx-audio.c +++ b/drivers/media/usb/em28xx/em28xx-audio.c @@ -850,7 +850,6 @@ static int em28xx_audio_urb_init(struct em28xx *dev) urb = usb_alloc_urb(npackets, GFP_ATOMIC); if (!urb) { - em28xx_errdev("usb_alloc_urb failed!\n"); em28xx_audio_free_urb(dev); return -ENOMEM; } diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c index 37456079f490..eebd5d7088d0 100644 --- a/drivers/media/usb/em28xx/em28xx-core.c +++ b/drivers/media/usb/em28xx/em28xx-core.c @@ -934,7 +934,6 @@ int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk, for (i = 0; i < usb_bufs->num_bufs; i++) { urb = usb_alloc_urb(usb_bufs->num_packets, GFP_KERNEL); if (!urb) { - em28xx_err("cannot alloc usb_ctl.urb %i\n", i); em28xx_uninit_usb_xfer(dev, mode); return -ENOMEM; } diff --git a/drivers/media/usb/gspca/benq.c b/drivers/media/usb/gspca/benq.c index 790baed33963..5fa67b78ad49 100644 --- a/drivers/media/usb/gspca/benq.c +++ b/drivers/media/usb/gspca/benq.c @@ -95,10 +95,8 @@ static int sd_start(struct gspca_dev *gspca_dev) #define SD_NPKT 32 for (n = 0; n < 4; n++) { urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL); - if (!urb) { - pr_err("usb_alloc_urb failed\n"); + if (!urb) return -ENOMEM; - } gspca_dev->urb[n] = urb; urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev, SD_PKT_SZ * SD_NPKT, diff --git a/drivers/media/usb/gspca/gspca.c b/drivers/media/usb/gspca/gspca.c index b17bd7ebcb47..af2395a76d8b 100644 --- a/drivers/media/usb/gspca/gspca.c +++ b/drivers/media/usb/gspca/gspca.c @@ -795,10 +795,8 @@ static int create_urbs(struct gspca_dev *gspca_dev, for (n = 0; n < nurbs; n++) { urb = usb_alloc_urb(npkt, GFP_KERNEL); - if (!urb) { - pr_err("usb_alloc_urb failed\n"); + if (!urb) return -ENOMEM; - } gspca_dev->urb[n] = urb; urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev, bsize, diff --git a/drivers/media/usb/gspca/konica.c b/drivers/media/usb/gspca/konica.c index 0712b1bc90b4..40aaaa9c5f30 100644 --- a/drivers/media/usb/gspca/konica.c +++ b/drivers/media/usb/gspca/konica.c @@ -208,10 +208,8 @@ static int sd_start(struct gspca_dev *gspca_dev) packet_size = le16_to_cpu(alt->endpoint[i].desc.wMaxPacketSize); urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL); - if (!urb) { - pr_err("usb_alloc_urb failed\n"); + if (!urb) return -ENOMEM; - } gspca_dev->urb[n] = urb; urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev, packet_size * SD_NPKT, diff --git a/drivers/media/usb/hackrf/hackrf.c b/drivers/media/usb/hackrf/hackrf.c index b1e229a44192..c2c8d12e9498 100644 --- a/drivers/media/usb/hackrf/hackrf.c +++ b/drivers/media/usb/hackrf/hackrf.c @@ -691,7 +691,6 @@ static int hackrf_alloc_urbs(struct hackrf_dev *dev, bool rcv) dev_dbg(dev->dev, "alloc urb=%d\n", i); dev->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); if (!dev->urb_list[i]) { - dev_dbg(dev->dev, "failed\n"); for (j = 0; j < i; j++) usb_free_urb(dev->urb_list[j]); return -ENOMEM; diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c index 2a3a8b470555..6d43d75493ea 100644 --- a/drivers/media/usb/hdpvr/hdpvr-video.c +++ b/drivers/media/usb/hdpvr/hdpvr-video.c @@ -155,10 +155,8 @@ int hdpvr_alloc_buffers(struct hdpvr_device *dev, uint count) buf->dev = dev; urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - v4l2_err(&dev->v4l2_dev, "cannot allocate urb\n"); + if (!urb) goto exit_urb; - } buf->urb = urb; mem = usb_alloc_coherent(dev->udev, dev->bulk_in_size, GFP_KERNEL, diff --git a/drivers/media/usb/msi2500/msi2500.c b/drivers/media/usb/msi2500/msi2500.c index e7f167d44c61..367eb7e2a31d 100644 --- a/drivers/media/usb/msi2500/msi2500.c +++ b/drivers/media/usb/msi2500/msi2500.c @@ -509,7 +509,6 @@ static int msi2500_isoc_init(struct msi2500_dev *dev) for (i = 0; i < MAX_ISO_BUFS; i++) { urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL); if (urb == NULL) { - dev_err(dev->dev, "Failed to allocate urb %d\n", i); msi2500_isoc_cleanup(dev); return -ENOMEM; } diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c index b51b27a3fd61..c4454c928776 100644 --- a/drivers/media/usb/pwc/pwc-if.c +++ b/drivers/media/usb/pwc/pwc-if.c @@ -410,7 +410,6 @@ retry: for (i = 0; i < MAX_ISO_BUFS; i++) { urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL); if (urb == NULL) { - PWC_ERROR("Failed to allocate urb %d\n", i); pwc_isoc_cleanup(pdev); return -ENOMEM; } diff --git a/drivers/media/usb/s2255/s2255drv.c b/drivers/media/usb/s2255/s2255drv.c index 43ba71a7d02b..9458eb0ef66f 100644 --- a/drivers/media/usb/s2255/s2255drv.c +++ b/drivers/media/usb/s2255/s2255drv.c @@ -2113,11 +2113,8 @@ static int s2255_start_readpipe(struct s2255_dev *dev) pipe_info->state = 1; pipe_info->err_count = 0; pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!pipe_info->stream_urb) { - dev_err(&dev->udev->dev, - "ReadStream: Unable to alloc URB\n"); + if (!pipe_info->stream_urb) return -ENOMEM; - } /* transfer buffer allocated in board_init */ usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev, pipe, @@ -2290,10 +2287,8 @@ static int s2255_probe(struct usb_interface *interface, } dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->fw_data->fw_urb) { - dev_err(&interface->dev, "out of memory!\n"); + if (!dev->fw_data->fw_urb) goto errorFWURB; - } dev->fw_data->pfw_data = kzalloc(CHUNK_SIZE, GFP_KERNEL); if (!dev->fw_data->pfw_data) { diff --git a/drivers/media/usb/stk1160/stk1160-video.c b/drivers/media/usb/stk1160/stk1160-video.c index 6ecb0b48423f..ce8ebbe395a6 100644 --- a/drivers/media/usb/stk1160/stk1160-video.c +++ b/drivers/media/usb/stk1160/stk1160-video.c @@ -457,10 +457,8 @@ int stk1160_alloc_isoc(struct stk1160 *dev) for (i = 0; i < num_bufs; i++) { urb = usb_alloc_urb(max_packets, GFP_KERNEL); - if (!urb) { - stk1160_err("cannot alloc urb[%d]\n", i); + if (!urb) goto free_i_bufs; - } dev->isoc_ctl.urb[i] = urb; #ifndef CONFIG_DMA_NONCOHERENT diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c index c21c4c004f97..db200c9d796d 100644 --- a/drivers/media/usb/stkwebcam/stk-webcam.c +++ b/drivers/media/usb/stkwebcam/stk-webcam.c @@ -452,10 +452,8 @@ static int stk_prepare_iso(struct stk_camera *dev) STK_ERROR("isobuf data already allocated\n"); if (dev->isobufs[i].urb == NULL) { urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL); - if (urb == NULL) { - STK_ERROR("Failed to allocate URB %d\n", i); + if (urb == NULL) goto isobufs_out; - } dev->isobufs[i].urb = urb; } else { STK_ERROR("Killing URB\n"); diff --git a/drivers/media/usb/tm6000/tm6000-dvb.c b/drivers/media/usb/tm6000/tm6000-dvb.c index 095f5db1a790..0426b210383b 100644 --- a/drivers/media/usb/tm6000/tm6000-dvb.c +++ b/drivers/media/usb/tm6000/tm6000-dvb.c @@ -129,10 +129,8 @@ static int tm6000_start_stream(struct tm6000_core *dev) } dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL); - if (dvb->bulk_urb == NULL) { - printk(KERN_ERR "tm6000: couldn't allocate urb\n"); + if (dvb->bulk_urb == NULL) return -ENOMEM; - } pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in.endp->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c index fa5e8bda2ae4..dee7e7d3d47d 100644 --- a/drivers/media/usb/tm6000/tm6000-video.c +++ b/drivers/media/usb/tm6000/tm6000-video.c @@ -635,7 +635,6 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev) for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { urb = usb_alloc_urb(max_packets, GFP_KERNEL); if (!urb) { - tm6000_err("cannot alloc isoc_ctl.urb %i\n", i); tm6000_uninit_isoc(dev); usb_free_urb(urb); return -ENOMEM; diff --git a/drivers/media/usb/usbvision/usbvision-core.c b/drivers/media/usb/usbvision/usbvision-core.c index 52ac4391582c..c23bf73a68ea 100644 --- a/drivers/media/usb/usbvision/usbvision-core.c +++ b/drivers/media/usb/usbvision/usbvision-core.c @@ -2303,11 +2303,8 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision) struct urb *urb; urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL); - if (urb == NULL) { - dev_err(&usbvision->dev->dev, - "%s: usb_alloc_urb() failed\n", __func__); + if (urb == NULL) return -ENOMEM; - } usbvision->sbuf[buf_idx].urb = urb; usbvision->sbuf[buf_idx].data = usb_alloc_coherent(usbvision->dev, diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c index 7433ba5c4bad..cc128db85723 100644 --- a/drivers/media/usb/zr364xx/zr364xx.c +++ b/drivers/media/usb/zr364xx/zr364xx.c @@ -1045,10 +1045,8 @@ static int zr364xx_start_readpipe(struct zr364xx_camera *cam) pipe_info->state = 1; pipe_info->err_count = 0; pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!pipe_info->stream_urb) { - dev_err(&cam->udev->dev, "ReadStream: Unable to alloc URB\n"); + if (!pipe_info->stream_urb) return -ENOMEM; - } /* transfer buffer allocated in board_init */ usb_fill_bulk_urb(pipe_info->stream_urb, cam->udev, pipe, diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index 1e819f98b94f..bb3e0d1dd355 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -2116,13 +2116,11 @@ static int vub300_probe(struct usb_interface *interface, command_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!command_out_urb) { retval = -ENOMEM; - dev_err(&udev->dev, "not enough memory for command_out_urb\n"); goto error0; } command_res_urb = usb_alloc_urb(0, GFP_KERNEL); if (!command_res_urb) { retval = -ENOMEM; - dev_err(&udev->dev, "not enough memory for command_res_urb\n"); goto error1; } /* this also allocates memory for our VUB300 mmc host device */ diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 19bff3a10f69..fe00f9134d51 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2 Enable this to support Broadcom USB 2.0 PHY connected to the USB controller on Northstar family. +config PHY_BCM_NS_USB3 + tristate "Broadcom Northstar USB 3.0 PHY Driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support Broadcom USB 3.0 PHY connected to the USB + controller on Northstar family. + config PHY_BERLIN_USB tristate "Marvell Berlin USB PHY Driver" depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF @@ -258,7 +267,9 @@ config PHY_SUN4I_USB depends on RESET_CONTROLLER depends on EXTCON depends on POWER_SUPPLY + depends on USB_SUPPORT select GENERIC_PHY + select USB_COMMON help Enable this to support the transceiver that is part of Allwinner sunxi SoCs. @@ -358,6 +369,14 @@ config PHY_ROCKCHIP_USB help Enable this to support the Rockchip USB 2.0 PHY. +config PHY_ROCKCHIP_INNO_USB2 + tristate "Rockchip INNO USB2PHY Driver" + depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF + depends on COMMON_CLK + select GENERIC_PHY + help + Support for Rockchip USB2.0 PHY with Innosilicon IP block. + config PHY_ROCKCHIP_EMMC tristate "Rockchip EMMC PHY Driver" depends on ARCH_ROCKCHIP && OF @@ -372,6 +391,23 @@ config PHY_ROCKCHIP_DP help Enable this to support the Rockchip Display Port PHY. +config PHY_ROCKCHIP_PCIE + tristate "Rockchip PCIe PHY Driver" + depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the Rockchip PCIe PHY. + +config PHY_ROCKCHIP_TYPEC + tristate "Rockchip TYPEC PHY Driver" + depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) + select EXTCON + select GENERIC_PHY + select RESET_CONTROLLER + help + Enable this to support the Rockchip USB TYPEC PHY. + config PHY_ST_SPEAR1310_MIPHY tristate "ST SPEAR1310-MIPHY driver" select GENERIC_PHY diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 90ae19879b0a..a534cf5be07d 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o +obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o @@ -39,8 +40,11 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o +obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o +obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o +obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/phy-bcm-ns-usb3.c new file mode 100644 index 000000000000..f420fa4bebfc --- /dev/null +++ b/drivers/phy/phy-bcm-ns-usb3.c @@ -0,0 +1,274 @@ +/* + * Broadcom Northstar USB 3.0 PHY Driver + * + * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> + * + * All magic values used for initialization (and related comments) were obtained + * from Broadcom's SDK: + * Copyright (c) Broadcom Corp, 2012 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bcma/bcma.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/slab.h> + +#define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */ + +enum bcm_ns_family { + BCM_NS_UNKNOWN, + BCM_NS_AX, + BCM_NS_BX, +}; + +struct bcm_ns_usb3 { + struct device *dev; + enum bcm_ns_family family; + void __iomem *dmp; + void __iomem *ccb_mii; + struct phy *phy; +}; + +static const struct of_device_id bcm_ns_usb3_id_table[] = { + { + .compatible = "brcm,ns-ax-usb3-phy", + .data = (int *)BCM_NS_AX, + }, + { + .compatible = "brcm,ns-bx-usb3-phy", + .data = (int *)BCM_NS_BX, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table); + +static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr, + u32 mask, u32 value, unsigned long timeout) +{ + unsigned long deadline = jiffies + timeout; + u32 val; + + do { + val = readl(addr); + if ((val & mask) == value) + return 0; + cpu_relax(); + udelay(10); + } while (!time_after_eq(jiffies, deadline)); + + dev_err(usb3->dev, "Timeout waiting for register %p\n", addr); + + return -EBUSY; +} + +static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3) +{ + return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL, + 0x0100, 0x0000, + usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US)); +} + +static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value) +{ + int err; + + err = bcm_ns_usb3_mii_mng_wait_idle(usb3); + if (err < 0) { + dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value); + return err; + } + + writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA); + + return 0; +} + +static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) +{ + int err; + + /* Enable MDIO. Setting MDCDIV as 26 */ + writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); + + /* Wait for MDIO? */ + udelay(2); + + /* USB3 PLL Block */ + err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000); + if (err < 0) + return err; + + /* Assert Ana_Pllseq start */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000); + + /* Assert CML Divider ratio to 26 */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400); + + /* Asserting PLL Reset */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000); + + /* Deaaserting PLL Reset */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000); + + /* Waiting MII Mgt interface idle */ + bcm_ns_usb3_mii_mng_wait_idle(usb3); + + /* Deasserting USB3 system reset */ + writel(0, usb3->dmp + BCMA_RESET_CTL); + + /* PLL frequency monitor enable */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000); + + /* PIPE Block */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060); + + /* CMPMAX & CMPMINTH setting */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d); + + /* DEGLITCH MIN & MAX setting */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302); + + /* TXPMD block */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040); + + /* Enabling SSC */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003); + + /* Waiting MII Mgt interface idle */ + bcm_ns_usb3_mii_mng_wait_idle(usb3); + + return 0; +} + +static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3) +{ + int err; + + /* Enable MDIO. Setting MDCDIV as 26 */ + writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); + + /* Wait for MDIO? */ + udelay(2); + + /* PLL30 block */ + err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000); + if (err < 0) + return err; + + bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400); + + bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0); + + bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c); + + /* Enable SSC */ + bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040); + + bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3); + + bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003); + + /* Waiting MII Mgt interface idle */ + bcm_ns_usb3_mii_mng_wait_idle(usb3); + + /* Deasserting USB3 system reset */ + writel(0, usb3->dmp + BCMA_RESET_CTL); + + return 0; +} + +static int bcm_ns_usb3_phy_init(struct phy *phy) +{ + struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy); + int err; + + /* Perform USB3 system soft reset */ + writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL); + + switch (usb3->family) { + case BCM_NS_AX: + err = bcm_ns_usb3_phy_init_ns_ax(usb3); + break; + case BCM_NS_BX: + err = bcm_ns_usb3_phy_init_ns_bx(usb3); + break; + default: + WARN_ON(1); + err = -ENOTSUPP; + } + + return err; +} + +static const struct phy_ops ops = { + .init = bcm_ns_usb3_phy_init, + .owner = THIS_MODULE, +}; + +static int bcm_ns_usb3_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *of_id; + struct bcm_ns_usb3 *usb3; + struct resource *res; + struct phy_provider *phy_provider; + + usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return -ENOMEM; + + usb3->dev = dev; + + of_id = of_match_device(bcm_ns_usb3_id_table, dev); + if (!of_id) + return -EINVAL; + usb3->family = (enum bcm_ns_family)of_id->data; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp"); + usb3->dmp = devm_ioremap_resource(dev, res); + if (IS_ERR(usb3->dmp)) { + dev_err(dev, "Failed to map DMP regs\n"); + return PTR_ERR(usb3->dmp); + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii"); + usb3->ccb_mii = devm_ioremap_resource(dev, res); + if (IS_ERR(usb3->ccb_mii)) { + dev_err(dev, "Failed to map ChipCommon B MII regs\n"); + return PTR_ERR(usb3->ccb_mii); + } + + usb3->phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(usb3->phy)) { + dev_err(dev, "Failed to create PHY\n"); + return PTR_ERR(usb3->phy); + } + + phy_set_drvdata(usb3->phy, usb3); + platform_set_drvdata(pdev, usb3); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver bcm_ns_usb3_driver = { + .probe = bcm_ns_usb3_probe, + .driver = { + .name = "bcm_ns_usb3", + .of_match_table = bcm_ns_usb3_id_table, + }, +}; +module_platform_driver(bcm_ns_usb3_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-bcm-ns2-pcie.c b/drivers/phy/phy-bcm-ns2-pcie.c index 9513f7ab1eaa..4c7d11d2b378 100644 --- a/drivers/phy/phy-bcm-ns2-pcie.c +++ b/drivers/phy/phy-bcm-ns2-pcie.c @@ -18,11 +18,6 @@ #include <linux/phy.h> #include <linux/phy/phy.h> -struct ns2_pci_phy { - struct mdio_device *mdiodev; - struct phy *phy; -}; - #define BLK_ADDR_REG_OFFSET 0x1f #define PLL_AFE1_100MHZ_BLK 0x2100 #define PLL_CLK_AMP_OFFSET 0x03 @@ -30,17 +25,17 @@ struct ns2_pci_phy { static int ns2_pci_phy_init(struct phy *p) { - struct ns2_pci_phy *phy = phy_get_drvdata(p); + struct mdio_device *mdiodev = phy_get_drvdata(p); int rc; /* select the AFE 100MHz block page */ - rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr, + rc = mdiobus_write(mdiodev->bus, mdiodev->addr, BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK); if (rc) goto err; /* set the 100 MHz reference clock amplitude to 2.05 v */ - rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr, + rc = mdiobus_write(mdiodev->bus, mdiodev->addr, PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V); if (rc) goto err; @@ -48,19 +43,19 @@ static int ns2_pci_phy_init(struct phy *p) return 0; err: - dev_err(&phy->mdiodev->dev, "Error %d writing to phy\n", rc); + dev_err(&mdiodev->dev, "Error %d writing to phy\n", rc); return rc; } -static struct phy_ops ns2_pci_phy_ops = { +static const struct phy_ops ns2_pci_phy_ops = { .init = ns2_pci_phy_init, + .owner = THIS_MODULE, }; static int ns2_pci_phy_probe(struct mdio_device *mdiodev) { struct device *dev = &mdiodev->dev; struct phy_provider *provider; - struct ns2_pci_phy *p; struct phy *phy; phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops); @@ -69,16 +64,7 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev) return PTR_ERR(phy); } - p = devm_kmalloc(dev, sizeof(struct ns2_pci_phy), - GFP_KERNEL); - if (!p) - return -ENOMEM; - - p->mdiodev = mdiodev; - dev_set_drvdata(dev, p); - - p->phy = phy; - phy_set_drvdata(phy, p); + phy_set_drvdata(phy, mdiodev); provider = devm_of_phy_provider_register(&phy->dev, of_phy_simple_xlate); diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 8eca906b6e70..a268f4d6f3e9 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode) } EXPORT_SYMBOL_GPL(phy_set_mode); +int phy_reset(struct phy *phy) +{ + int ret; + + if (!phy || !phy->ops->reset) + return 0; + + mutex_lock(&phy->mutex); + ret = phy->ops->reset(phy); + mutex_unlock(&phy->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_reset); + /** * _of_phy_get() - lookup and obtain a reference to a phy by phandle * @np: device_node for which to get the phy diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c index b2e59b6170ac..32ae78c8ca17 100644 --- a/drivers/phy/phy-da8xx-usb.c +++ b/drivers/phy/phy-da8xx-usb.c @@ -154,7 +154,7 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev) d_phy->regmap = syscon_regmap_lookup_by_compatible( "ti,da830-cfgchip"); else - d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0"); + d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon"); if (IS_ERR(d_phy->regmap)) { dev_err(dev, "Failed to get syscon\n"); return PTR_ERR(d_phy->regmap); diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c index 20696f53303f..07ed608905ac 100644 --- a/drivers/phy/phy-exynos5-usbdrd.c +++ b/drivers/phy/phy-exynos5-usbdrd.c @@ -249,7 +249,7 @@ static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst, static unsigned int exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst) { - static u32 reg; + u32 reg; struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); /* restore any previous reference clock settings */ @@ -295,7 +295,7 @@ exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst) static unsigned int exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst) { - static u32 reg; + u32 reg; struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); /* restore any previous reference clock settings */ diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index c134989052f5..fe909fd8144f 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -133,11 +133,49 @@ static int omap_usb_power_on(struct phy *x) return omap_usb_phy_power(phy, true); } +static int omap_usb2_disable_clocks(struct omap_usb *phy) +{ + clk_disable(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_disable(phy->optclk); + + return 0; +} + +static int omap_usb2_enable_clocks(struct omap_usb *phy) +{ + int ret; + + ret = clk_enable(phy->wkupclk); + if (ret < 0) { + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err0; + } + + if (!IS_ERR(phy->optclk)) { + ret = clk_enable(phy->optclk); + if (ret < 0) { + dev_err(phy->dev, "Failed to enable optclk %d\n", ret); + goto err1; + } + } + + return 0; + +err1: + clk_disable(phy->wkupclk); + +err0: + return ret; +} + static int omap_usb_init(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); u32 val; + omap_usb2_enable_clocks(phy); + if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { /* * @@ -155,8 +193,16 @@ static int omap_usb_init(struct phy *x) return 0; } +static int omap_usb_exit(struct phy *x) +{ + struct omap_usb *phy = phy_get_drvdata(x); + + return omap_usb2_disable_clocks(phy); +} + static const struct phy_ops ops = { .init = omap_usb_init, + .exit = omap_usb_exit, .power_on = omap_usb_power_on, .power_off = omap_usb_power_off, .owner = THIS_MODULE, @@ -376,65 +422,11 @@ static int omap_usb2_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM - -static int omap_usb2_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_disable(phy->wkupclk); - if (!IS_ERR(phy->optclk)) - clk_disable(phy->optclk); - - return 0; -} - -static int omap_usb2_runtime_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - int ret; - - ret = clk_enable(phy->wkupclk); - if (ret < 0) { - dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); - goto err0; - } - - if (!IS_ERR(phy->optclk)) { - ret = clk_enable(phy->optclk); - if (ret < 0) { - dev_err(phy->dev, "Failed to enable optclk %d\n", ret); - goto err1; - } - } - - return 0; - -err1: - clk_disable(phy->wkupclk); - -err0: - return ret; -} - -static const struct dev_pm_ops omap_usb2_pm_ops = { - SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume, - NULL) -}; - -#define DEV_PM_OPS (&omap_usb2_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif - static struct platform_driver omap_usb2_driver = { .probe = omap_usb2_probe, .remove = omap_usb2_remove, .driver = { .name = "omap-usb2", - .pm = DEV_PM_OPS, .of_match_table = omap_usb2_id_table, }, }; diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c index 107cb57c3513..18a5b495ad65 100644 --- a/drivers/phy/phy-qcom-ufs.c +++ b/drivers/phy/phy-qcom-ufs.c @@ -283,10 +283,8 @@ static int __ufs_qcom_phy_init_vreg(struct phy *phy, err = 0; } snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name); - if (of_get_property(dev->of_node, prop_name, NULL)) - vreg->is_always_on = true; - else - vreg->is_always_on = false; + vreg->is_always_on = of_property_read_bool(dev->of_node, + prop_name); } if (!strcmp(name, "vdda-pll")) { diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c index 31156c9c4707..3d97eadd247d 100644 --- a/drivers/phy/phy-rcar-gen3-usb2.c +++ b/drivers/phy/phy-rcar-gen3-usb2.c @@ -280,6 +280,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { { .compatible = "renesas,usb2-phy-r8a7795" }, + { .compatible = "renesas,usb2-phy-r8a7796" }, { .compatible = "renesas,rcar-gen3-usb2-phy" }, { } }; diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c new file mode 100644 index 000000000000..ac203107b071 --- /dev/null +++ b/drivers/phy/phy-rockchip-inno-usb2.c @@ -0,0 +1,707 @@ +/* + * Rockchip USB2.0 PHY with Innosilicon IP block driver + * + * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio/consumer.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +#define BIT_WRITEABLE_SHIFT 16 +#define SCHEDULE_DELAY (60 * HZ) + +enum rockchip_usb2phy_port_id { + USB2PHY_PORT_OTG, + USB2PHY_PORT_HOST, + USB2PHY_NUM_PORTS, +}; + +enum rockchip_usb2phy_host_state { + PHY_STATE_HS_ONLINE = 0, + PHY_STATE_DISCONNECT = 1, + PHY_STATE_CONNECT = 2, + PHY_STATE_FS_LS_ONLINE = 4, +}; + +struct usb2phy_reg { + unsigned int offset; + unsigned int bitend; + unsigned int bitstart; + unsigned int disable; + unsigned int enable; +}; + +/** + * struct rockchip_usb2phy_port_cfg: usb-phy port configuration. + * @phy_sus: phy suspend register. + * @ls_det_en: linestate detection enable register. + * @ls_det_st: linestate detection state register. + * @ls_det_clr: linestate detection clear register. + * @utmi_ls: utmi linestate state register. + * @utmi_hstdet: utmi host disconnect register. + */ +struct rockchip_usb2phy_port_cfg { + struct usb2phy_reg phy_sus; + struct usb2phy_reg ls_det_en; + struct usb2phy_reg ls_det_st; + struct usb2phy_reg ls_det_clr; + struct usb2phy_reg utmi_ls; + struct usb2phy_reg utmi_hstdet; +}; + +/** + * struct rockchip_usb2phy_cfg: usb-phy configuration. + * @reg: the address offset of grf for usb-phy config. + * @num_ports: specify how many ports that the phy has. + * @clkout_ctl: keep on/turn off output clk of phy. + */ +struct rockchip_usb2phy_cfg { + unsigned int reg; + unsigned int num_ports; + struct usb2phy_reg clkout_ctl; + const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS]; +}; + +/** + * struct rockchip_usb2phy_port: usb-phy port data. + * @port_id: flag for otg port or host port. + * @suspended: phy suspended flag. + * @ls_irq: IRQ number assigned for linestate detection. + * @mutex: for register updating in sm_work. + * @sm_work: OTG state machine work. + * @phy_cfg: port register configuration, assigned by driver data. + */ +struct rockchip_usb2phy_port { + struct phy *phy; + unsigned int port_id; + bool suspended; + int ls_irq; + struct mutex mutex; + struct delayed_work sm_work; + const struct rockchip_usb2phy_port_cfg *port_cfg; +}; + +/** + * struct rockchip_usb2phy: usb2.0 phy driver data. + * @grf: General Register Files regmap. + * @clk: clock struct of phy input clk. + * @clk480m: clock struct of phy output clk. + * @clk_hw: clock struct of phy output clk management. + * @phy_cfg: phy register configuration, assigned by driver data. + * @ports: phy port instance. + */ +struct rockchip_usb2phy { + struct device *dev; + struct regmap *grf; + struct clk *clk; + struct clk *clk480m; + struct clk_hw clk480m_hw; + const struct rockchip_usb2phy_cfg *phy_cfg; + struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS]; +}; + +static inline int property_enable(struct rockchip_usb2phy *rphy, + const struct usb2phy_reg *reg, bool en) +{ + unsigned int val, mask, tmp; + + tmp = en ? reg->enable : reg->disable; + mask = GENMASK(reg->bitend, reg->bitstart); + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); + + return regmap_write(rphy->grf, reg->offset, val); +} + +static inline bool property_enabled(struct rockchip_usb2phy *rphy, + const struct usb2phy_reg *reg) +{ + int ret; + unsigned int tmp, orig; + unsigned int mask = GENMASK(reg->bitend, reg->bitstart); + + ret = regmap_read(rphy->grf, reg->offset, &orig); + if (ret) + return false; + + tmp = (orig & mask) >> reg->bitstart; + return tmp == reg->enable; +} + +static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw) +{ + struct rockchip_usb2phy *rphy = + container_of(hw, struct rockchip_usb2phy, clk480m_hw); + int ret; + + /* turn on 480m clk output if it is off */ + if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) { + ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true); + if (ret) + return ret; + + /* waitting for the clk become stable */ + mdelay(1); + } + + return 0; +} + +static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw) +{ + struct rockchip_usb2phy *rphy = + container_of(hw, struct rockchip_usb2phy, clk480m_hw); + + /* turn off 480m clk output */ + property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false); +} + +static int rockchip_usb2phy_clk480m_enabled(struct clk_hw *hw) +{ + struct rockchip_usb2phy *rphy = + container_of(hw, struct rockchip_usb2phy, clk480m_hw); + + return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl); +} + +static unsigned long +rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return 480000000; +} + +static const struct clk_ops rockchip_usb2phy_clkout_ops = { + .enable = rockchip_usb2phy_clk480m_enable, + .disable = rockchip_usb2phy_clk480m_disable, + .is_enabled = rockchip_usb2phy_clk480m_enabled, + .recalc_rate = rockchip_usb2phy_clk480m_recalc_rate, +}; + +static void rockchip_usb2phy_clk480m_unregister(void *data) +{ + struct rockchip_usb2phy *rphy = data; + + of_clk_del_provider(rphy->dev->of_node); + clk_unregister(rphy->clk480m); +} + +static int +rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy) +{ + struct device_node *node = rphy->dev->of_node; + struct clk_init_data init; + const char *clk_name; + int ret; + + init.flags = 0; + init.name = "clk_usbphy_480m"; + init.ops = &rockchip_usb2phy_clkout_ops; + + /* optional override of the clockname */ + of_property_read_string(node, "clock-output-names", &init.name); + + if (rphy->clk) { + clk_name = __clk_get_name(rphy->clk); + init.parent_names = &clk_name; + init.num_parents = 1; + } else { + init.parent_names = NULL; + init.num_parents = 0; + } + + rphy->clk480m_hw.init = &init; + + /* register the clock */ + rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw); + if (IS_ERR(rphy->clk480m)) { + ret = PTR_ERR(rphy->clk480m); + goto err_ret; + } + + ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m); + if (ret < 0) + goto err_clk_provider; + + ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister, + rphy); + if (ret < 0) + goto err_unreg_action; + + return 0; + +err_unreg_action: + of_clk_del_provider(node); +err_clk_provider: + clk_unregister(rphy->clk480m); +err_ret: + return ret; +} + +static int rockchip_usb2phy_init(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + int ret; + + if (rport->port_id == USB2PHY_PORT_HOST) { + /* clear linestate and enable linestate detect irq */ + mutex_lock(&rport->mutex); + + ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true); + if (ret) { + mutex_unlock(&rport->mutex); + return ret; + } + + ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true); + if (ret) { + mutex_unlock(&rport->mutex); + return ret; + } + + mutex_unlock(&rport->mutex); + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY); + } + + return 0; +} + +static int rockchip_usb2phy_power_on(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + int ret; + + dev_dbg(&rport->phy->dev, "port power on\n"); + + if (!rport->suspended) + return 0; + + ret = clk_prepare_enable(rphy->clk480m); + if (ret) + return ret; + + ret = property_enable(rphy, &rport->port_cfg->phy_sus, false); + if (ret) + return ret; + + rport->suspended = false; + return 0; +} + +static int rockchip_usb2phy_power_off(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + int ret; + + dev_dbg(&rport->phy->dev, "port power off\n"); + + if (rport->suspended) + return 0; + + ret = property_enable(rphy, &rport->port_cfg->phy_sus, true); + if (ret) + return ret; + + rport->suspended = true; + clk_disable_unprepare(rphy->clk480m); + + return 0; +} + +static int rockchip_usb2phy_exit(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + + if (rport->port_id == USB2PHY_PORT_HOST) + cancel_delayed_work_sync(&rport->sm_work); + + return 0; +} + +static const struct phy_ops rockchip_usb2phy_ops = { + .init = rockchip_usb2phy_init, + .exit = rockchip_usb2phy_exit, + .power_on = rockchip_usb2phy_power_on, + .power_off = rockchip_usb2phy_power_off, + .owner = THIS_MODULE, +}; + +/* + * The function manage host-phy port state and suspend/resume phy port + * to save power. + * + * we rely on utmi_linestate and utmi_hostdisconnect to identify whether + * devices is disconnect or not. Besides, we do not need care it is FS/LS + * disconnected or HS disconnected, actually, we just only need get the + * device is disconnected at last through rearm the delayed work, + * to suspend the phy port in _PHY_STATE_DISCONNECT_ case. + * + * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke + * some clk related APIs, so do not invoke it from interrupt context directly. + */ +static void rockchip_usb2phy_sm_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, sm_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + unsigned int sh = rport->port_cfg->utmi_hstdet.bitend - + rport->port_cfg->utmi_hstdet.bitstart + 1; + unsigned int ul, uhd, state; + unsigned int ul_mask, uhd_mask; + int ret; + + mutex_lock(&rport->mutex); + + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul); + if (ret < 0) + goto next_schedule; + + ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, + &uhd); + if (ret < 0) + goto next_schedule; + + uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend, + rport->port_cfg->utmi_hstdet.bitstart); + ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend, + rport->port_cfg->utmi_ls.bitstart); + + /* stitch on utmi_ls and utmi_hstdet as phy state */ + state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) | + (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh); + + switch (state) { + case PHY_STATE_HS_ONLINE: + dev_dbg(&rport->phy->dev, "HS online\n"); + break; + case PHY_STATE_FS_LS_ONLINE: + /* + * For FS/LS device, the online state share with connect state + * from utmi_ls and utmi_hstdet register, so we distinguish + * them via suspended flag. + * + * Plus, there are two cases, one is D- Line pull-up, and D+ + * line pull-down, the state is 4; another is D+ line pull-up, + * and D- line pull-down, the state is 2. + */ + if (!rport->suspended) { + /* D- line pull-up, D+ line pull-down */ + dev_dbg(&rport->phy->dev, "FS/LS online\n"); + break; + } + /* fall through */ + case PHY_STATE_CONNECT: + if (rport->suspended) { + dev_dbg(&rport->phy->dev, "Connected\n"); + rockchip_usb2phy_power_on(rport->phy); + rport->suspended = false; + } else { + /* D+ line pull-up, D- line pull-down */ + dev_dbg(&rport->phy->dev, "FS/LS online\n"); + } + break; + case PHY_STATE_DISCONNECT: + if (!rport->suspended) { + dev_dbg(&rport->phy->dev, "Disconnected\n"); + rockchip_usb2phy_power_off(rport->phy); + rport->suspended = true; + } + + /* + * activate the linestate detection to get the next device + * plug-in irq. + */ + property_enable(rphy, &rport->port_cfg->ls_det_clr, true); + property_enable(rphy, &rport->port_cfg->ls_det_en, true); + + /* + * we don't need to rearm the delayed work when the phy port + * is suspended. + */ + mutex_unlock(&rport->mutex); + return; + default: + dev_dbg(&rport->phy->dev, "unknown phy state\n"); + break; + } + +next_schedule: + mutex_unlock(&rport->mutex); + schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY); +} + +static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data) +{ + struct rockchip_usb2phy_port *rport = data; + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + + if (!property_enabled(rphy, &rport->port_cfg->ls_det_st)) + return IRQ_NONE; + + mutex_lock(&rport->mutex); + + /* disable linestate detect irq and clear its status */ + property_enable(rphy, &rport->port_cfg->ls_det_en, false); + property_enable(rphy, &rport->port_cfg->ls_det_clr, true); + + mutex_unlock(&rport->mutex); + + /* + * In this case for host phy port, a new device is plugged in, + * meanwhile, if the phy port is suspended, we need rearm the work to + * resume it and mange its states; otherwise, we do nothing about that. + */ + if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST) + rockchip_usb2phy_sm_work(&rport->sm_work.work); + + return IRQ_HANDLED; +} + +static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy, + struct rockchip_usb2phy_port *rport, + struct device_node *child_np) +{ + int ret; + + rport->port_id = USB2PHY_PORT_HOST; + rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST]; + rport->suspended = true; + + mutex_init(&rport->mutex); + INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work); + + rport->ls_irq = of_irq_get_byname(child_np, "linestate"); + if (rport->ls_irq < 0) { + dev_err(rphy->dev, "no linestate irq provided\n"); + return rport->ls_irq; + } + + ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL, + rockchip_usb2phy_linestate_irq, + IRQF_ONESHOT, + "rockchip_usb2phy", rport); + if (ret) { + dev_err(rphy->dev, "failed to request irq handle\n"); + return ret; + } + + return 0; +} + +static int rockchip_usb2phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct phy_provider *provider; + struct rockchip_usb2phy *rphy; + const struct rockchip_usb2phy_cfg *phy_cfgs; + const struct of_device_id *match; + unsigned int reg; + int index, ret; + + rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL); + if (!rphy) + return -ENOMEM; + + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) { + dev_err(dev, "phy configs are not assigned!\n"); + return -EINVAL; + } + + if (!dev->parent || !dev->parent->of_node) + return -EINVAL; + + rphy->grf = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(rphy->grf)) + return PTR_ERR(rphy->grf); + + if (of_property_read_u32(np, "reg", ®)) { + dev_err(dev, "the reg property is not assigned in %s node\n", + np->name); + return -EINVAL; + } + + rphy->dev = dev; + phy_cfgs = match->data; + platform_set_drvdata(pdev, rphy); + + /* find out a proper config which can be matched with dt. */ + index = 0; + while (phy_cfgs[index].reg) { + if (phy_cfgs[index].reg == reg) { + rphy->phy_cfg = &phy_cfgs[index]; + break; + } + + ++index; + } + + if (!rphy->phy_cfg) { + dev_err(dev, "no phy-config can be matched with %s node\n", + np->name); + return -EINVAL; + } + + rphy->clk = of_clk_get_by_name(np, "phyclk"); + if (!IS_ERR(rphy->clk)) { + clk_prepare_enable(rphy->clk); + } else { + dev_info(&pdev->dev, "no phyclk specified\n"); + rphy->clk = NULL; + } + + ret = rockchip_usb2phy_clk480m_register(rphy); + if (ret) { + dev_err(dev, "failed to register 480m output clock\n"); + goto disable_clks; + } + + index = 0; + for_each_available_child_of_node(np, child_np) { + struct rockchip_usb2phy_port *rport = &rphy->ports[index]; + struct phy *phy; + + /* + * This driver aim to support both otg-port and host-port, + * but unfortunately, the otg part is not ready in current, + * so this comments and below codes are interim, which should + * be changed after otg-port is supplied soon. + */ + if (of_node_cmp(child_np->name, "host-port")) + goto next_child; + + phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + ret = PTR_ERR(phy); + goto put_child; + } + + rport->phy = phy; + phy_set_drvdata(rport->phy, rport); + + ret = rockchip_usb2phy_host_port_init(rphy, rport, child_np); + if (ret) + goto put_child; + +next_child: + /* to prevent out of boundary */ + if (++index >= rphy->phy_cfg->num_ports) + break; + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(provider); + +put_child: + of_node_put(child_np); +disable_clks: + if (rphy->clk) { + clk_disable_unprepare(rphy->clk); + clk_put(rphy->clk); + } + return ret; +} + +static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = { + { + .reg = 0x700, + .num_ports = 2, + .clkout_ctl = { 0x0724, 15, 15, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0x0728, 15, 0, 0, 0x1d1 }, + .ls_det_en = { 0x0680, 4, 4, 0, 1 }, + .ls_det_st = { 0x0690, 4, 4, 0, 1 }, + .ls_det_clr = { 0x06a0, 4, 4, 0, 1 }, + .utmi_ls = { 0x049c, 14, 13, 0, 1 }, + .utmi_hstdet = { 0x049c, 12, 12, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + +static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = { + { + .reg = 0xe450, + .num_ports = 2, + .clkout_ctl = { 0xe450, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 }, + .ls_det_en = { 0xe3c0, 6, 6, 0, 1 }, + .ls_det_st = { 0xe3e0, 6, 6, 0, 1 }, + .ls_det_clr = { 0xe3d0, 6, 6, 0, 1 }, + .utmi_ls = { 0xe2ac, 22, 21, 0, 1 }, + .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 } + } + }, + }, + { + .reg = 0xe460, + .num_ports = 2, + .clkout_ctl = { 0xe460, 4, 4, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 }, + .ls_det_en = { 0xe3c0, 11, 11, 0, 1 }, + .ls_det_st = { 0xe3e0, 11, 11, 0, 1 }, + .ls_det_clr = { 0xe3d0, 11, 11, 0, 1 }, + .utmi_ls = { 0xe2ac, 26, 25, 0, 1 }, + .utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + +static const struct of_device_id rockchip_usb2phy_dt_match[] = { + { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs }, + { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs }, + {} +}; +MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match); + +static struct platform_driver rockchip_usb2phy_driver = { + .probe = rockchip_usb2phy_probe, + .driver = { + .name = "rockchip-usb2phy", + .of_match_table = rockchip_usb2phy_dt_match, + }, +}; +module_platform_driver(rockchip_usb2phy_driver); + +MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-rockchip-pcie.c b/drivers/phy/phy-rockchip-pcie.c new file mode 100644 index 000000000000..a2b4c6b58aea --- /dev/null +++ b/drivers/phy/phy-rockchip-pcie.c @@ -0,0 +1,357 @@ +/* + * Rockchip PCIe PHY driver + * + * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com> + * Copyright (C) 2016 ROCKCHIP, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> + +/* + * The higher 16-bit of this register is used for write protection + * only if BIT(x + 16) set to 1 the BIT(x) can be written. + */ +#define HIWORD_UPDATE(val, mask, shift) \ + ((val) << (shift) | (mask) << ((shift) + 16)) + +#define PHY_MAX_LANE_NUM 4 +#define PHY_CFG_DATA_SHIFT 7 +#define PHY_CFG_ADDR_SHIFT 1 +#define PHY_CFG_DATA_MASK 0xf +#define PHY_CFG_ADDR_MASK 0x3f +#define PHY_CFG_RD_MASK 0x3ff +#define PHY_CFG_WR_ENABLE 1 +#define PHY_CFG_WR_DISABLE 1 +#define PHY_CFG_WR_SHIFT 0 +#define PHY_CFG_WR_MASK 1 +#define PHY_CFG_PLL_LOCK 0x10 +#define PHY_CFG_CLK_TEST 0x10 +#define PHY_CFG_CLK_SCC 0x12 +#define PHY_CFG_SEPE_RATE BIT(3) +#define PHY_CFG_PLL_100M BIT(3) +#define PHY_PLL_LOCKED BIT(9) +#define PHY_PLL_OUTPUT BIT(10) +#define PHY_LANE_A_STATUS 0x30 +#define PHY_LANE_B_STATUS 0x31 +#define PHY_LANE_C_STATUS 0x32 +#define PHY_LANE_D_STATUS 0x33 +#define PHY_LANE_RX_DET_SHIFT 11 +#define PHY_LANE_RX_DET_TH 0x1 +#define PHY_LANE_IDLE_OFF 0x1 +#define PHY_LANE_IDLE_MASK 0x1 +#define PHY_LANE_IDLE_A_SHIFT 3 +#define PHY_LANE_IDLE_B_SHIFT 4 +#define PHY_LANE_IDLE_C_SHIFT 5 +#define PHY_LANE_IDLE_D_SHIFT 6 + +struct rockchip_pcie_data { + unsigned int pcie_conf; + unsigned int pcie_status; + unsigned int pcie_laneoff; +}; + +struct rockchip_pcie_phy { + struct rockchip_pcie_data *phy_data; + struct regmap *reg_base; + struct reset_control *phy_rst; + struct clk *clk_pciephy_ref; +}; + +static inline void phy_wr_cfg(struct rockchip_pcie_phy *rk_phy, + u32 addr, u32 data) +{ + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(data, + PHY_CFG_DATA_MASK, + PHY_CFG_DATA_SHIFT) | + HIWORD_UPDATE(addr, + PHY_CFG_ADDR_MASK, + PHY_CFG_ADDR_SHIFT)); + udelay(1); + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(PHY_CFG_WR_ENABLE, + PHY_CFG_WR_MASK, + PHY_CFG_WR_SHIFT)); + udelay(1); + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(PHY_CFG_WR_DISABLE, + PHY_CFG_WR_MASK, + PHY_CFG_WR_SHIFT)); +} + +static inline u32 phy_rd_cfg(struct rockchip_pcie_phy *rk_phy, + u32 addr) +{ + u32 val; + + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(addr, + PHY_CFG_RD_MASK, + PHY_CFG_ADDR_SHIFT)); + regmap_read(rk_phy->reg_base, + rk_phy->phy_data->pcie_status, + &val); + return val; +} + +static int rockchip_pcie_phy_power_off(struct phy *phy) +{ + struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); + int err = 0; + + err = reset_control_assert(rk_phy->phy_rst); + if (err) { + dev_err(&phy->dev, "assert phy_rst err %d\n", err); + return err; + } + + return 0; +} + +static int rockchip_pcie_phy_power_on(struct phy *phy) +{ + struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); + int err = 0; + u32 status; + unsigned long timeout; + + err = reset_control_deassert(rk_phy->phy_rst); + if (err) { + dev_err(&phy->dev, "deassert phy_rst err %d\n", err); + return err; + } + + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(PHY_CFG_PLL_LOCK, + PHY_CFG_ADDR_MASK, + PHY_CFG_ADDR_SHIFT)); + + /* + * No documented timeout value for phy operation below, + * so we make it large enough here. And we use loop-break + * method which should not be harmful. + */ + timeout = jiffies + msecs_to_jiffies(1000); + + err = -EINVAL; + while (time_before(jiffies, timeout)) { + regmap_read(rk_phy->reg_base, + rk_phy->phy_data->pcie_status, + &status); + if (status & PHY_PLL_LOCKED) { + dev_dbg(&phy->dev, "pll locked!\n"); + err = 0; + break; + } + msleep(20); + } + + if (err) { + dev_err(&phy->dev, "pll lock timeout!\n"); + goto err_pll_lock; + } + + phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE); + phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M); + + err = -ETIMEDOUT; + while (time_before(jiffies, timeout)) { + regmap_read(rk_phy->reg_base, + rk_phy->phy_data->pcie_status, + &status); + if (!(status & PHY_PLL_OUTPUT)) { + dev_dbg(&phy->dev, "pll output enable done!\n"); + err = 0; + break; + } + msleep(20); + } + + if (err) { + dev_err(&phy->dev, "pll output enable timeout!\n"); + goto err_pll_lock; + } + + regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf, + HIWORD_UPDATE(PHY_CFG_PLL_LOCK, + PHY_CFG_ADDR_MASK, + PHY_CFG_ADDR_SHIFT)); + err = -EINVAL; + while (time_before(jiffies, timeout)) { + regmap_read(rk_phy->reg_base, + rk_phy->phy_data->pcie_status, + &status); + if (status & PHY_PLL_LOCKED) { + dev_dbg(&phy->dev, "pll relocked!\n"); + err = 0; + break; + } + msleep(20); + } + + if (err) { + dev_err(&phy->dev, "pll relock timeout!\n"); + goto err_pll_lock; + } + + return 0; + +err_pll_lock: + reset_control_assert(rk_phy->phy_rst); + return err; +} + +static int rockchip_pcie_phy_init(struct phy *phy) +{ + struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); + int err = 0; + + err = clk_prepare_enable(rk_phy->clk_pciephy_ref); + if (err) { + dev_err(&phy->dev, "Fail to enable pcie ref clock.\n"); + goto err_refclk; + } + + err = reset_control_assert(rk_phy->phy_rst); + if (err) { + dev_err(&phy->dev, "assert phy_rst err %d\n", err); + goto err_reset; + } + + return err; + +err_reset: + clk_disable_unprepare(rk_phy->clk_pciephy_ref); +err_refclk: + return err; +} + +static int rockchip_pcie_phy_exit(struct phy *phy) +{ + struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); + int err = 0; + + clk_disable_unprepare(rk_phy->clk_pciephy_ref); + + err = reset_control_deassert(rk_phy->phy_rst); + if (err) { + dev_err(&phy->dev, "deassert phy_rst err %d\n", err); + goto err_reset; + } + + return err; + +err_reset: + clk_prepare_enable(rk_phy->clk_pciephy_ref); + return err; +} + +static const struct phy_ops ops = { + .init = rockchip_pcie_phy_init, + .exit = rockchip_pcie_phy_exit, + .power_on = rockchip_pcie_phy_power_on, + .power_off = rockchip_pcie_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct rockchip_pcie_data rk3399_pcie_data = { + .pcie_conf = 0xe220, + .pcie_status = 0xe2a4, + .pcie_laneoff = 0xe214, +}; + +static const struct of_device_id rockchip_pcie_phy_dt_ids[] = { + { + .compatible = "rockchip,rk3399-pcie-phy", + .data = &rk3399_pcie_data, + }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_pcie_phy_dt_ids); + +static int rockchip_pcie_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rockchip_pcie_phy *rk_phy; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct regmap *grf; + const struct of_device_id *of_id; + + grf = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(grf)) { + dev_err(dev, "Cannot find GRF syscon\n"); + return PTR_ERR(grf); + } + + rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL); + if (!rk_phy) + return -ENOMEM; + + of_id = of_match_device(rockchip_pcie_phy_dt_ids, &pdev->dev); + if (!of_id) + return -EINVAL; + + rk_phy->phy_data = (struct rockchip_pcie_data *)of_id->data; + rk_phy->reg_base = grf; + + rk_phy->phy_rst = devm_reset_control_get(dev, "phy"); + if (IS_ERR(rk_phy->phy_rst)) { + if (PTR_ERR(rk_phy->phy_rst) != -EPROBE_DEFER) + dev_err(dev, + "missing phy property for reset controller\n"); + return PTR_ERR(rk_phy->phy_rst); + } + + rk_phy->clk_pciephy_ref = devm_clk_get(dev, "refclk"); + if (IS_ERR(rk_phy->clk_pciephy_ref)) { + dev_err(dev, "refclk not found.\n"); + return PTR_ERR(rk_phy->clk_pciephy_ref); + } + + generic_phy = devm_phy_create(dev, dev->of_node, &ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, rk_phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver rockchip_pcie_driver = { + .probe = rockchip_pcie_phy_probe, + .driver = { + .name = "rockchip-pcie-phy", + .of_match_table = rockchip_pcie_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_pcie_driver); + +MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip PCIe PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c new file mode 100644 index 000000000000..7cfb0f8995de --- /dev/null +++ b/drivers/phy/phy-rockchip-typec.c @@ -0,0 +1,1023 @@ +/* + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd + * Author: Chris Zhong <zyw@rock-chips.com> + * Kever Yang <kever.yang@rock-chips.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * The ROCKCHIP Type-C PHY has two PLL clocks. The first PLL clock + * is used for USB3, the second PLL clock is used for DP. This Type-C PHY has + * 3 working modes: USB3 only mode, DP only mode, and USB3+DP mode. + * At USB3 only mode, both PLL clocks need to be initialized, this allows the + * PHY to switch mode between USB3 and USB3+DP, without disconnecting the USB + * device. + * In The DP only mode, only the DP PLL needs to be powered on, and the 4 lanes + * are all used for DP. + * + * This driver gets extcon cable state and property, then decides which mode to + * select: + * + * 1. USB3 only mode: + * EXTCON_USB or EXTCON_USB_HOST state is true, and + * EXTCON_PROP_USB_SS property is true. + * EXTCON_DISP_DP state is false. + * + * 2. DP only mode: + * EXTCON_DISP_DP state is true, and + * EXTCON_PROP_USB_SS property is false. + * If EXTCON_USB_HOST state is true, it is DP + USB2 mode, since the USB2 phy + * is a separate phy, so this case is still DP only mode. + * + * 3. USB3+DP mode: + * EXTCON_USB_HOST and EXTCON_DISP_DP are both true, and + * EXTCON_PROP_USB_SS property is true. + * + * This Type-C PHY driver supports normal and flip orientation. The orientation + * is reported by the EXTCON_PROP_USB_TYPEC_POLARITY property: true is flip + * orientation, false is normal orientation. + * + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/extcon.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> + +#include <linux/mfd/syscon.h> +#include <linux/phy/phy.h> + +#define CMN_SSM_BANDGAP (0x21 << 2) +#define CMN_SSM_BIAS (0x22 << 2) +#define CMN_PLLSM0_PLLEN (0x29 << 2) +#define CMN_PLLSM0_PLLPRE (0x2a << 2) +#define CMN_PLLSM0_PLLVREF (0x2b << 2) +#define CMN_PLLSM0_PLLLOCK (0x2c << 2) +#define CMN_PLLSM1_PLLEN (0x31 << 2) +#define CMN_PLLSM1_PLLPRE (0x32 << 2) +#define CMN_PLLSM1_PLLVREF (0x33 << 2) +#define CMN_PLLSM1_PLLLOCK (0x34 << 2) +#define CMN_PLLSM1_USER_DEF_CTRL (0x37 << 2) +#define CMN_ICAL_OVRD (0xc1 << 2) +#define CMN_PLL0_VCOCAL_OVRD (0x83 << 2) +#define CMN_PLL0_VCOCAL_INIT (0x84 << 2) +#define CMN_PLL0_VCOCAL_ITER (0x85 << 2) +#define CMN_PLL0_LOCK_REFCNT_START (0x90 << 2) +#define CMN_PLL0_LOCK_PLLCNT_START (0x92 << 2) +#define CMN_PLL0_LOCK_PLLCNT_THR (0x93 << 2) +#define CMN_PLL0_INTDIV (0x94 << 2) +#define CMN_PLL0_FRACDIV (0x95 << 2) +#define CMN_PLL0_HIGH_THR (0x96 << 2) +#define CMN_PLL0_DSM_DIAG (0x97 << 2) +#define CMN_PLL0_SS_CTRL1 (0x98 << 2) +#define CMN_PLL0_SS_CTRL2 (0x99 << 2) +#define CMN_PLL1_VCOCAL_START (0xa1 << 2) +#define CMN_PLL1_VCOCAL_OVRD (0xa3 << 2) +#define CMN_PLL1_VCOCAL_INIT (0xa4 << 2) +#define CMN_PLL1_VCOCAL_ITER (0xa5 << 2) +#define CMN_PLL1_LOCK_REFCNT_START (0xb0 << 2) +#define CMN_PLL1_LOCK_PLLCNT_START (0xb2 << 2) +#define CMN_PLL1_LOCK_PLLCNT_THR (0xb3 << 2) +#define CMN_PLL1_INTDIV (0xb4 << 2) +#define CMN_PLL1_FRACDIV (0xb5 << 2) +#define CMN_PLL1_HIGH_THR (0xb6 << 2) +#define CMN_PLL1_DSM_DIAG (0xb7 << 2) +#define CMN_PLL1_SS_CTRL1 (0xb8 << 2) +#define CMN_PLL1_SS_CTRL2 (0xb9 << 2) +#define CMN_RXCAL_OVRD (0xd1 << 2) +#define CMN_TXPUCAL_CTRL (0xe0 << 2) +#define CMN_TXPUCAL_OVRD (0xe1 << 2) +#define CMN_TXPDCAL_OVRD (0xf1 << 2) +#define CMN_DIAG_PLL0_FBH_OVRD (0x1c0 << 2) +#define CMN_DIAG_PLL0_FBL_OVRD (0x1c1 << 2) +#define CMN_DIAG_PLL0_OVRD (0x1c2 << 2) +#define CMN_DIAG_PLL0_V2I_TUNE (0x1c5 << 2) +#define CMN_DIAG_PLL0_CP_TUNE (0x1c6 << 2) +#define CMN_DIAG_PLL0_LF_PROG (0x1c7 << 2) +#define CMN_DIAG_PLL1_FBH_OVRD (0x1d0 << 2) +#define CMN_DIAG_PLL1_FBL_OVRD (0x1d1 << 2) +#define CMN_DIAG_PLL1_OVRD (0x1d2 << 2) +#define CMN_DIAG_PLL1_V2I_TUNE (0x1d5 << 2) +#define CMN_DIAG_PLL1_CP_TUNE (0x1d6 << 2) +#define CMN_DIAG_PLL1_LF_PROG (0x1d7 << 2) +#define CMN_DIAG_PLL1_PTATIS_TUNE1 (0x1d8 << 2) +#define CMN_DIAG_PLL1_PTATIS_TUNE2 (0x1d9 << 2) +#define CMN_DIAG_PLL1_INCLK_CTRL (0x1da << 2) +#define CMN_DIAG_HSCLK_SEL (0x1e0 << 2) + +#define XCVR_PSM_RCTRL(n) ((0x4001 | ((n) << 9)) << 2) +#define XCVR_PSM_CAL_TMR(n) ((0x4002 | ((n) << 9)) << 2) +#define XCVR_PSM_A0IN_TMR(n) ((0x4003 | ((n) << 9)) << 2) +#define TX_TXCC_CAL_SCLR_MULT(n) ((0x4047 | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_00(n) ((0x404c | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_01(n) ((0x404d | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_10(n) ((0x404e | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_11(n) ((0x404f | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_000(n) ((0x4050 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_001(n) ((0x4051 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_010(n) ((0x4052 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_011(n) ((0x4053 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_100(n) ((0x4054 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_101(n) ((0x4055 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_110(n) ((0x4056 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_111(n) ((0x4057 | ((n) << 9)) << 2) +#define XCVR_DIAG_PLLDRC_CTRL(n) ((0x40e0 | ((n) << 9)) << 2) +#define XCVR_DIAG_BIDI_CTRL(n) ((0x40e8 | ((n) << 9)) << 2) +#define XCVR_DIAG_LANE_FCM_EN_MGN(n) ((0x40f2 | ((n) << 9)) << 2) +#define TX_PSC_A0(n) ((0x4100 | ((n) << 9)) << 2) +#define TX_PSC_A1(n) ((0x4101 | ((n) << 9)) << 2) +#define TX_PSC_A2(n) ((0x4102 | ((n) << 9)) << 2) +#define TX_PSC_A3(n) ((0x4103 | ((n) << 9)) << 2) +#define TX_RCVDET_CTRL(n) ((0x4120 | ((n) << 9)) << 2) +#define TX_RCVDET_EN_TMR(n) ((0x4122 | ((n) << 9)) << 2) +#define TX_RCVDET_ST_TMR(n) ((0x4123 | ((n) << 9)) << 2) +#define TX_DIAG_TX_DRV(n) ((0x41e1 | ((n) << 9)) << 2) +#define TX_DIAG_BGREF_PREDRV_DELAY (0x41e7 << 2) +#define TX_ANA_CTRL_REG_1 (0x5020 << 2) +#define TX_ANA_CTRL_REG_2 (0x5021 << 2) +#define TXDA_COEFF_CALC_CTRL (0x5022 << 2) +#define TX_DIG_CTRL_REG_2 (0x5024 << 2) +#define TXDA_CYA_AUXDA_CYA (0x5025 << 2) +#define TX_ANA_CTRL_REG_3 (0x5026 << 2) +#define TX_ANA_CTRL_REG_4 (0x5027 << 2) +#define TX_ANA_CTRL_REG_5 (0x5029 << 2) + +#define RX_PSC_A0(n) ((0x8000 | ((n) << 9)) << 2) +#define RX_PSC_A1(n) ((0x8001 | ((n) << 9)) << 2) +#define RX_PSC_A2(n) ((0x8002 | ((n) << 9)) << 2) +#define RX_PSC_A3(n) ((0x8003 | ((n) << 9)) << 2) +#define RX_PSC_CAL(n) ((0x8006 | ((n) << 9)) << 2) +#define RX_PSC_RDY(n) ((0x8007 | ((n) << 9)) << 2) +#define RX_IQPI_ILL_CAL_OVRD (0x8023 << 2) +#define RX_EPI_ILL_CAL_OVRD (0x8033 << 2) +#define RX_SDCAL0_OVRD (0x8041 << 2) +#define RX_SDCAL1_OVRD (0x8049 << 2) +#define RX_SLC_INIT (0x806d << 2) +#define RX_SLC_RUN (0x806e << 2) +#define RX_CDRLF_CNFG2 (0x8081 << 2) +#define RX_SIGDET_HL_FILT_TMR(n) ((0x8090 | ((n) << 9)) << 2) +#define RX_SLC_IOP0_OVRD (0x8101 << 2) +#define RX_SLC_IOP1_OVRD (0x8105 << 2) +#define RX_SLC_QOP0_OVRD (0x8109 << 2) +#define RX_SLC_QOP1_OVRD (0x810d << 2) +#define RX_SLC_EOP0_OVRD (0x8111 << 2) +#define RX_SLC_EOP1_OVRD (0x8115 << 2) +#define RX_SLC_ION0_OVRD (0x8119 << 2) +#define RX_SLC_ION1_OVRD (0x811d << 2) +#define RX_SLC_QON0_OVRD (0x8121 << 2) +#define RX_SLC_QON1_OVRD (0x8125 << 2) +#define RX_SLC_EON0_OVRD (0x8129 << 2) +#define RX_SLC_EON1_OVRD (0x812d << 2) +#define RX_SLC_IEP0_OVRD (0x8131 << 2) +#define RX_SLC_IEP1_OVRD (0x8135 << 2) +#define RX_SLC_QEP0_OVRD (0x8139 << 2) +#define RX_SLC_QEP1_OVRD (0x813d << 2) +#define RX_SLC_EEP0_OVRD (0x8141 << 2) +#define RX_SLC_EEP1_OVRD (0x8145 << 2) +#define RX_SLC_IEN0_OVRD (0x8149 << 2) +#define RX_SLC_IEN1_OVRD (0x814d << 2) +#define RX_SLC_QEN0_OVRD (0x8151 << 2) +#define RX_SLC_QEN1_OVRD (0x8155 << 2) +#define RX_SLC_EEN0_OVRD (0x8159 << 2) +#define RX_SLC_EEN1_OVRD (0x815d << 2) +#define RX_REE_CTRL_DATA_MASK(n) ((0x81bb | ((n) << 9)) << 2) +#define RX_DIAG_SIGDET_TUNE(n) ((0x81dc | ((n) << 9)) << 2) +#define RX_DIAG_SC2C_DELAY (0x81e1 << 2) + +#define PMA_LANE_CFG (0xc000 << 2) +#define PIPE_CMN_CTRL1 (0xc001 << 2) +#define PIPE_CMN_CTRL2 (0xc002 << 2) +#define PIPE_COM_LOCK_CFG1 (0xc003 << 2) +#define PIPE_COM_LOCK_CFG2 (0xc004 << 2) +#define PIPE_RCV_DET_INH (0xc005 << 2) +#define DP_MODE_CTL (0xc008 << 2) +#define DP_CLK_CTL (0xc009 << 2) +#define STS (0xc00F << 2) +#define PHY_ISO_CMN_CTRL (0xc010 << 2) +#define PHY_DP_TX_CTL (0xc408 << 2) +#define PMA_CMN_CTRL1 (0xc800 << 2) +#define PHY_PMA_ISO_CMN_CTRL (0xc810 << 2) +#define PHY_ISOLATION_CTRL (0xc81f << 2) +#define PHY_PMA_ISO_XCVR_CTRL(n) ((0xcc11 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_LINK_MODE(n) ((0xcc12 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_PWRST_CTRL(n) ((0xcc13 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_TX_DATA_LO(n) ((0xcc14 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_TX_DATA_HI(n) ((0xcc15 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_RX_DATA_LO(n) ((0xcc16 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_RX_DATA_HI(n) ((0xcc17 | ((n) << 6)) << 2) +#define TX_BIST_CTRL(n) ((0x4140 | ((n) << 9)) << 2) +#define TX_BIST_UDDWR(n) ((0x4141 | ((n) << 9)) << 2) + +/* + * Selects which PLL clock will be driven on the analog high speed + * clock 0: PLL 0 div 1 + * clock 1: PLL 1 div 2 + */ +#define CLK_PLL_CONFIG 0X30 +#define CLK_PLL_MASK 0x33 + +#define CMN_READY BIT(0) + +#define DP_PLL_CLOCK_ENABLE BIT(2) +#define DP_PLL_ENABLE BIT(0) +#define DP_PLL_DATA_RATE_RBR ((2 << 12) | (4 << 8)) +#define DP_PLL_DATA_RATE_HBR ((2 << 12) | (4 << 8)) +#define DP_PLL_DATA_RATE_HBR2 ((1 << 12) | (2 << 8)) + +#define DP_MODE_A0 BIT(4) +#define DP_MODE_A2 BIT(6) +#define DP_MODE_ENTER_A0 0xc101 +#define DP_MODE_ENTER_A2 0xc104 + +#define PHY_MODE_SET_TIMEOUT 100000 + +#define PIN_ASSIGN_C_E 0x51d9 +#define PIN_ASSIGN_D_F 0x5100 + +#define MODE_DISCONNECT 0 +#define MODE_UFP_USB BIT(0) +#define MODE_DFP_USB BIT(1) +#define MODE_DFP_DP BIT(2) + +struct usb3phy_reg { + u32 offset; + u32 enable_bit; + u32 write_enable; +}; + +struct rockchip_usb3phy_port_cfg { + struct usb3phy_reg typec_conn_dir; + struct usb3phy_reg usb3tousb2_en; + struct usb3phy_reg external_psm; + struct usb3phy_reg pipe_status; +}; + +struct rockchip_typec_phy { + struct device *dev; + void __iomem *base; + struct extcon_dev *extcon; + struct regmap *grf_regs; + struct clk *clk_core; + struct clk *clk_ref; + struct reset_control *uphy_rst; + struct reset_control *pipe_rst; + struct reset_control *tcphy_rst; + struct rockchip_usb3phy_port_cfg port_cfgs; + /* mutex to protect access to individual PHYs */ + struct mutex lock; + + bool flip; + u8 mode; +}; + +struct phy_reg { + u16 value; + u32 addr; +}; + +struct phy_reg usb3_pll_cfg[] = { + { 0xf0, CMN_PLL0_VCOCAL_INIT }, + { 0x18, CMN_PLL0_VCOCAL_ITER }, + { 0xd0, CMN_PLL0_INTDIV }, + { 0x4a4a, CMN_PLL0_FRACDIV }, + { 0x34, CMN_PLL0_HIGH_THR }, + { 0x1ee, CMN_PLL0_SS_CTRL1 }, + { 0x7f03, CMN_PLL0_SS_CTRL2 }, + { 0x20, CMN_PLL0_DSM_DIAG }, + { 0, CMN_DIAG_PLL0_OVRD }, + { 0, CMN_DIAG_PLL0_FBH_OVRD }, + { 0, CMN_DIAG_PLL0_FBL_OVRD }, + { 0x7, CMN_DIAG_PLL0_V2I_TUNE }, + { 0x45, CMN_DIAG_PLL0_CP_TUNE }, + { 0x8, CMN_DIAG_PLL0_LF_PROG }, +}; + +struct phy_reg dp_pll_cfg[] = { + { 0xf0, CMN_PLL1_VCOCAL_INIT }, + { 0x18, CMN_PLL1_VCOCAL_ITER }, + { 0x30b9, CMN_PLL1_VCOCAL_START }, + { 0x21c, CMN_PLL1_INTDIV }, + { 0, CMN_PLL1_FRACDIV }, + { 0x5, CMN_PLL1_HIGH_THR }, + { 0x35, CMN_PLL1_SS_CTRL1 }, + { 0x7f1e, CMN_PLL1_SS_CTRL2 }, + { 0x20, CMN_PLL1_DSM_DIAG }, + { 0, CMN_PLLSM1_USER_DEF_CTRL }, + { 0, CMN_DIAG_PLL1_OVRD }, + { 0, CMN_DIAG_PLL1_FBH_OVRD }, + { 0, CMN_DIAG_PLL1_FBL_OVRD }, + { 0x6, CMN_DIAG_PLL1_V2I_TUNE }, + { 0x45, CMN_DIAG_PLL1_CP_TUNE }, + { 0x8, CMN_DIAG_PLL1_LF_PROG }, + { 0x100, CMN_DIAG_PLL1_PTATIS_TUNE1 }, + { 0x7, CMN_DIAG_PLL1_PTATIS_TUNE2 }, + { 0x4, CMN_DIAG_PLL1_INCLK_CTRL }, +}; + +static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy) +{ + u32 i, rdata; + + /* + * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent + * cmn_psm_clk_dig_div = 2, set the clk division to 2 + */ + writel(0x830, tcphy->base + PMA_CMN_CTRL1); + for (i = 0; i < 4; i++) { + /* + * The following PHY configuration assumes a 24 MHz reference + * clock. + */ + writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i)); + writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i)); + writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i)); + } + + rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL); + rdata &= ~CLK_PLL_MASK; + rdata |= CLK_PLL_CONFIG; + writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL); +} + +static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy) +{ + u32 i; + + /* load the configuration of PLL0 */ + for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++) + writel(usb3_pll_cfg[i].value, + tcphy->base + usb3_pll_cfg[i].addr); +} + +static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy) +{ + u32 i; + + /* set the default mode to RBR */ + writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR, + tcphy->base + DP_CLK_CTL); + + /* load the configuration of PLL1 */ + for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++) + writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr); +} + +static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) +{ + writel(0x7799, tcphy->base + TX_PSC_A0(lane)); + writel(0x7798, tcphy->base + TX_PSC_A1(lane)); + writel(0x5098, tcphy->base + TX_PSC_A2(lane)); + writel(0x5098, tcphy->base + TX_PSC_A3(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane)); + writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane)); +} + +static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) +{ + writel(0xa6fd, tcphy->base + RX_PSC_A0(lane)); + writel(0xa6fd, tcphy->base + RX_PSC_A1(lane)); + writel(0xa410, tcphy->base + RX_PSC_A2(lane)); + writel(0x2410, tcphy->base + RX_PSC_A3(lane)); + writel(0x23ff, tcphy->base + RX_PSC_CAL(lane)); + writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane)); + writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane)); + writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane)); + writel(0x2010, tcphy->base + RX_PSC_RDY(lane)); + writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane)); +} + +static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) +{ + u16 rdata; + + writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane)); + writel(0x6799, tcphy->base + TX_PSC_A0(lane)); + writel(0x6798, tcphy->base + TX_PSC_A1(lane)); + writel(0x98, tcphy->base + TX_PSC_A2(lane)); + writel(0x98, tcphy->base + TX_PSC_A3(lane)); + + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane)); + + writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane)); + writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane)); + + rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane)); + rdata = (rdata & 0x8fff) | 0x6000; + writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane)); +} + +static inline int property_enable(struct rockchip_typec_phy *tcphy, + const struct usb3phy_reg *reg, bool en) +{ + u32 mask = 1 << reg->write_enable; + u32 val = en << reg->enable_bit; + + return regmap_write(tcphy->grf_regs, reg->offset, val | mask); +} + +static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) +{ + u16 rdata, rdata2, val; + + /* disable txda_cal_latch_en for rewrite the calibration values */ + rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); + val = rdata & 0xdfff; + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + + /* + * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and + * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it + * works. + */ + rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2); + rdata = rdata & 0xffc0; + + rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL); + rdata2 = rdata2 & 0x3f; + + val = rdata | rdata2; + writel(val, tcphy->base + TX_DIG_CTRL_REG_2); + usleep_range(1000, 1050); + + /* + * Enable signal for latch that sample and holds calibration values. + * Activate this signal for 1 clock cycle to sample new calibration + * values. + */ + rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); + val = rdata | 0x2000; + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + usleep_range(150, 200); + + /* set TX Voltage Level and TX Deemphasis to 0 */ + writel(0, tcphy->base + PHY_DP_TX_CTL); + /* re-enable decap */ + writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2); + writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2); + writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1); + writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1); + + writel(0, tcphy->base + TX_ANA_CTRL_REG_5); + + /* + * Programs txda_drv_ldo_prog[15:0], Sets driver LDO + * voltage 16'h1001 for DP-AUX-TX and RX + */ + writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4); + + /* re-enables Bandgap reference for LDO */ + writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1); + writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1); + + /* + * re-enables the transmitter pre-driver, driver data selection MUX, + * and receiver detect circuits. + */ + writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2); + writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2); + + /* + * BIT 12: Controls auxda_polarity, which selects the polarity of the + * xcvr: + * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull + * down aux_m) + * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down + * aux_p) + */ + val = 0xa078; + if (!tcphy->flip) + val |= BIT(12); + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + + writel(0, tcphy->base + TX_ANA_CTRL_REG_3); + writel(0, tcphy->base + TX_ANA_CTRL_REG_4); + writel(0, tcphy->base + TX_ANA_CTRL_REG_5); + + /* + * Controls low_power_swing_en, set the voltage swing of the driver + * to 400mv. The values below are peak to peak (differential) values. + */ + writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL); + writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA); + + /* Controls tx_high_z_tm_en */ + val = readl(tcphy->base + TX_DIG_CTRL_REG_2); + val |= BIT(15); + writel(val, tcphy->base + TX_DIG_CTRL_REG_2); +} + +static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode) +{ + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + int ret, i; + u32 val; + + ret = clk_prepare_enable(tcphy->clk_core); + if (ret) { + dev_err(tcphy->dev, "Failed to prepare_enable core clock\n"); + return ret; + } + + ret = clk_prepare_enable(tcphy->clk_ref); + if (ret) { + dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n"); + goto err_clk_core; + } + + reset_control_deassert(tcphy->tcphy_rst); + + property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip); + + tcphy_cfg_24m(tcphy); + + if (mode == MODE_DFP_DP) { + tcphy_cfg_dp_pll(tcphy); + for (i = 0; i < 4; i++) + tcphy_dp_cfg_lane(tcphy, i); + + writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG); + } else { + tcphy_cfg_usb3_pll(tcphy); + tcphy_cfg_dp_pll(tcphy); + if (tcphy->flip) { + tcphy_tx_usb3_cfg_lane(tcphy, 3); + tcphy_rx_usb3_cfg_lane(tcphy, 2); + tcphy_dp_cfg_lane(tcphy, 0); + tcphy_dp_cfg_lane(tcphy, 1); + } else { + tcphy_tx_usb3_cfg_lane(tcphy, 0); + tcphy_rx_usb3_cfg_lane(tcphy, 1); + tcphy_dp_cfg_lane(tcphy, 2); + tcphy_dp_cfg_lane(tcphy, 3); + } + + writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG); + } + + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); + + reset_control_deassert(tcphy->uphy_rst); + + ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1, + val, val & CMN_READY, 10, + PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + dev_err(tcphy->dev, "wait pma ready timeout\n"); + ret = -ETIMEDOUT; + goto err_wait_pma; + } + + reset_control_deassert(tcphy->pipe_rst); + + return 0; + +err_wait_pma: + reset_control_assert(tcphy->uphy_rst); + reset_control_assert(tcphy->tcphy_rst); + clk_disable_unprepare(tcphy->clk_ref); +err_clk_core: + clk_disable_unprepare(tcphy->clk_core); + return ret; +} + +static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy) +{ + reset_control_assert(tcphy->tcphy_rst); + reset_control_assert(tcphy->uphy_rst); + reset_control_assert(tcphy->pipe_rst); + clk_disable_unprepare(tcphy->clk_core); + clk_disable_unprepare(tcphy->clk_ref); +} + +static int tcphy_get_mode(struct rockchip_typec_phy *tcphy) +{ + struct extcon_dev *edev = tcphy->extcon; + union extcon_property_value property; + unsigned int id; + bool dfp, ufp, dp; + u8 mode; + int ret; + + ufp = extcon_get_state(edev, EXTCON_USB); + dfp = extcon_get_state(edev, EXTCON_USB_HOST); + dp = extcon_get_state(edev, EXTCON_DISP_DP); + + mode = MODE_DFP_USB; + id = EXTCON_USB_HOST; + + if (ufp) { + mode = MODE_UFP_USB; + id = EXTCON_USB; + } else if (dp) { + mode = MODE_DFP_DP; + id = EXTCON_DISP_DP; + + ret = extcon_get_property(edev, id, EXTCON_PROP_USB_SS, + &property); + if (ret) { + dev_err(tcphy->dev, "get superspeed property failed\n"); + return ret; + } + + if (property.intval) + mode |= MODE_DFP_USB; + } + + ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY, + &property); + if (ret) { + dev_err(tcphy->dev, "get polarity property failed\n"); + return ret; + } + + tcphy->flip = property.intval ? 1 : 0; + + return mode; +} + +static int rockchip_usb3_phy_power_on(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + const struct usb3phy_reg *reg = &cfg->pipe_status; + int timeout, new_mode, ret = 0; + u32 val; + + mutex_lock(&tcphy->lock); + + new_mode = tcphy_get_mode(tcphy); + if (new_mode < 0) { + ret = new_mode; + goto unlock_ret; + } + + /* DP-only mode; fall back to USB2 */ + if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) + goto unlock_ret; + + if (tcphy->mode == new_mode) + goto unlock_ret; + + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_init(tcphy, new_mode); + + /* wait TCPHY for pipe ready */ + for (timeout = 0; timeout < 100; timeout++) { + regmap_read(tcphy->grf_regs, reg->offset, &val); + if (!(val & BIT(reg->enable_bit))) { + tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB); + goto unlock_ret; + } + usleep_range(10, 20); + } + + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); + + ret = -ETIMEDOUT; + +unlock_ret: + mutex_unlock(&tcphy->lock); + return ret; +} + +static int rockchip_usb3_phy_power_off(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + + mutex_lock(&tcphy->lock); + + if (tcphy->mode == MODE_DISCONNECT) + goto unlock; + + tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB); + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); + +unlock: + mutex_unlock(&tcphy->lock); + return 0; +} + +static const struct phy_ops rockchip_usb3_phy_ops = { + .power_on = rockchip_usb3_phy_power_on, + .power_off = rockchip_usb3_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_dp_phy_power_on(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + int new_mode, ret = 0; + u32 val; + + mutex_lock(&tcphy->lock); + + new_mode = tcphy_get_mode(tcphy); + if (new_mode < 0) { + ret = new_mode; + goto unlock_ret; + } + + if (!(new_mode & MODE_DFP_DP)) { + ret = -ENODEV; + goto unlock_ret; + } + + if (tcphy->mode == new_mode) + goto unlock_ret; + + /* + * If the PHY has been power on, but the mode is not DP only mode, + * re-init the PHY for setting all of 4 lanes to DP. + */ + if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) { + tcphy_phy_deinit(tcphy); + tcphy_phy_init(tcphy, new_mode); + } else if (tcphy->mode == MODE_DISCONNECT) { + tcphy_phy_init(tcphy, new_mode); + } + + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, + val, val & DP_MODE_A2, 1000, + PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n"); + goto power_on_finish; + } + + tcphy_dp_aux_calibration(tcphy); + + writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL); + + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, + val, val & DP_MODE_A0, 1000, + PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); + dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n"); + goto power_on_finish; + } + + tcphy->mode |= MODE_DFP_DP; + +power_on_finish: + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); +unlock_ret: + mutex_unlock(&tcphy->lock); + return ret; +} + +static int rockchip_dp_phy_power_off(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + + mutex_lock(&tcphy->lock); + + if (tcphy->mode == MODE_DISCONNECT) + goto unlock; + + tcphy->mode &= ~MODE_DFP_DP; + + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); + + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); + +unlock: + mutex_unlock(&tcphy->lock); + return 0; +} + +static const struct phy_ops rockchip_dp_phy_ops = { + .power_on = rockchip_dp_phy_power_on, + .power_off = rockchip_dp_phy_power_off, + .owner = THIS_MODULE, +}; + +static int tcphy_get_param(struct device *dev, + struct usb3phy_reg *reg, + const char *name) +{ + u32 buffer[3]; + int ret; + + ret = of_property_read_u32_array(dev->of_node, name, buffer, 3); + if (ret) { + dev_err(dev, "Can not parse %s\n", name); + return ret; + } + + reg->offset = buffer[0]; + reg->enable_bit = buffer[1]; + reg->write_enable = buffer[2]; + return 0; +} + +static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy, + struct device *dev) +{ + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + int ret; + + ret = tcphy_get_param(dev, &cfg->typec_conn_dir, + "rockchip,typec-conn-dir"); + if (ret) + return ret; + + ret = tcphy_get_param(dev, &cfg->usb3tousb2_en, + "rockchip,usb3tousb2-en"); + if (ret) + return ret; + + ret = tcphy_get_param(dev, &cfg->external_psm, + "rockchip,external-psm"); + if (ret) + return ret; + + ret = tcphy_get_param(dev, &cfg->pipe_status, + "rockchip,pipe-status"); + if (ret) + return ret; + + tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node, + "rockchip,grf"); + if (IS_ERR(tcphy->grf_regs)) { + dev_err(dev, "could not find grf dt node\n"); + return PTR_ERR(tcphy->grf_regs); + } + + tcphy->clk_core = devm_clk_get(dev, "tcpdcore"); + if (IS_ERR(tcphy->clk_core)) { + dev_err(dev, "could not get uphy core clock\n"); + return PTR_ERR(tcphy->clk_core); + } + + tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref"); + if (IS_ERR(tcphy->clk_ref)) { + dev_err(dev, "could not get uphy ref clock\n"); + return PTR_ERR(tcphy->clk_ref); + } + + tcphy->uphy_rst = devm_reset_control_get(dev, "uphy"); + if (IS_ERR(tcphy->uphy_rst)) { + dev_err(dev, "no uphy_rst reset control found\n"); + return PTR_ERR(tcphy->uphy_rst); + } + + tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe"); + if (IS_ERR(tcphy->pipe_rst)) { + dev_err(dev, "no pipe_rst reset control found\n"); + return PTR_ERR(tcphy->pipe_rst); + } + + tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy"); + if (IS_ERR(tcphy->tcphy_rst)) { + dev_err(dev, "no tcphy_rst reset control found\n"); + return PTR_ERR(tcphy->tcphy_rst); + } + + return 0; +} + +static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy) +{ + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs; + + reset_control_assert(tcphy->tcphy_rst); + reset_control_assert(tcphy->uphy_rst); + reset_control_assert(tcphy->pipe_rst); + + /* select external psm clock */ + property_enable(tcphy, &cfg->external_psm, 1); + property_enable(tcphy, &cfg->usb3tousb2_en, 0); + + tcphy->mode = MODE_DISCONNECT; +} + +static int rockchip_typec_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct rockchip_typec_phy *tcphy; + struct phy_provider *phy_provider; + struct resource *res; + int ret; + + tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL); + if (!tcphy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tcphy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(tcphy->base)) + return PTR_ERR(tcphy->base); + + ret = tcphy_parse_dt(tcphy, dev); + if (ret) + return ret; + + tcphy->dev = dev; + platform_set_drvdata(pdev, tcphy); + mutex_init(&tcphy->lock); + + typec_phy_pre_init(tcphy); + + tcphy->extcon = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(tcphy->extcon)) { + if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER) + dev_err(dev, "Invalid or missing extcon\n"); + return PTR_ERR(tcphy->extcon); + } + + pm_runtime_enable(dev); + + for_each_available_child_of_node(np, child_np) { + struct phy *phy; + + if (!of_node_cmp(child_np->name, "dp-port")) + phy = devm_phy_create(dev, child_np, + &rockchip_dp_phy_ops); + else if (!of_node_cmp(child_np->name, "usb3-port")) + phy = devm_phy_create(dev, child_np, + &rockchip_usb3_phy_ops); + else + continue; + + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy: %s\n", + child_np->name); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, tcphy); + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "Failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static int rockchip_typec_phy_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id rockchip_typec_phy_dt_ids[] = { + { .compatible = "rockchip,rk3399-typec-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids); + +static struct platform_driver rockchip_typec_phy_driver = { + .probe = rockchip_typec_phy_probe, + .remove = rockchip_typec_phy_remove, + .driver = { + .name = "rockchip-typec-phy", + .of_match_table = rockchip_typec_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_typec_phy_driver); + +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>"); +MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c index 2a7381f4fe4c..734987fa0ad7 100644 --- a/drivers/phy/phy-rockchip-usb.c +++ b/drivers/phy/phy-rockchip-usb.c @@ -29,6 +29,7 @@ #include <linux/reset.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> +#include <linux/delay.h> static int enable_usb_uart; @@ -64,6 +65,7 @@ struct rockchip_usb_phy { struct clk_hw clk480m_hw; struct phy *phy; bool uart_enabled; + struct reset_control *reset; }; static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, @@ -144,9 +146,23 @@ static int rockchip_usb_phy_power_on(struct phy *_phy) return clk_prepare_enable(phy->clk480m); } +static int rockchip_usb_phy_reset(struct phy *_phy) +{ + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + + if (phy->reset) { + reset_control_assert(phy->reset); + udelay(10); + reset_control_deassert(phy->reset); + } + + return 0; +} + static const struct phy_ops ops = { .power_on = rockchip_usb_phy_power_on, .power_off = rockchip_usb_phy_power_off, + .reset = rockchip_usb_phy_reset, .owner = THIS_MODULE, }; @@ -185,6 +201,10 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, return -EINVAL; } + rk_phy->reset = of_reset_control_get(child, "phy-reset"); + if (IS_ERR(rk_phy->reset)) + rk_phy->reset = NULL; + rk_phy->reg_offset = reg_offset; rk_phy->clk = of_clk_get_by_name(child, "phyclk"); diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 8c7eb335622e..b9342a2af7b3 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -40,6 +40,7 @@ #include <linux/power_supply.h> #include <linux/regulator/consumer.h> #include <linux/reset.h> +#include <linux/spinlock.h> #include <linux/usb/of.h> #include <linux/workqueue.h> @@ -50,7 +51,7 @@ #define REG_PHYCTL_A33 0x10 #define REG_PHY_UNK_H3 0x20 -#define REG_PMU_UNK_H3 0x10 +#define REG_PMU_UNK1 0x10 #define PHYCTL_DATA BIT(7) @@ -98,6 +99,7 @@ enum sun4i_usb_phy_type { sun6i_a31_phy, sun8i_a33_phy, sun8i_h3_phy, + sun50i_a64_phy, }; struct sun4i_usb_phy_cfg { @@ -106,13 +108,14 @@ struct sun4i_usb_phy_cfg { u32 disc_thresh; u8 phyctl_offset; bool dedicated_clocks; + bool enable_pmu_unk1; }; struct sun4i_usb_phy_data { void __iomem *base; const struct sun4i_usb_phy_cfg *cfg; enum usb_dr_mode dr_mode; - struct mutex mutex; + spinlock_t reg_lock; /* guard access to phyctl reg */ struct sun4i_usb_phy { struct phy *phy; void __iomem *pmu; @@ -122,7 +125,6 @@ struct sun4i_usb_phy_data { bool regulator_on; int index; } phys[MAX_PHYS]; - int first_phy; /* phy0 / otg related variables */ struct extcon_dev *extcon; bool phy0_init; @@ -131,6 +133,7 @@ struct sun4i_usb_phy_data { struct power_supply *vbus_power_supply; struct notifier_block vbus_power_nb; bool vbus_power_nb_registered; + bool force_session_end; int id_det_irq; int vbus_det_irq; int id_det; @@ -179,12 +182,14 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); u32 temp, usbc_bit = BIT(phy->index * 2); void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset; + unsigned long flags; int i; - mutex_lock(&phy_data->mutex); + spin_lock_irqsave(&phy_data->reg_lock, flags); - if (phy_data->cfg->type == sun8i_a33_phy) { - /* A33 needs us to set phyctl to 0 explicitly */ + if (phy_data->cfg->type == sun8i_a33_phy || + phy_data->cfg->type == sun50i_a64_phy) { + /* A33 or A64 needs us to set phyctl to 0 explicitly */ writel(0, phyctl); } @@ -218,7 +223,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, data >>= 1; } - mutex_unlock(&phy_data->mutex); + + spin_unlock_irqrestore(&phy_data->reg_lock, flags); } static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) @@ -258,14 +264,16 @@ static int sun4i_usb_phy_init(struct phy *_phy) return ret; } + if (data->cfg->enable_pmu_unk1) { + val = readl(phy->pmu + REG_PMU_UNK1); + writel(val & ~2, phy->pmu + REG_PMU_UNK1); + } + if (data->cfg->type == sun8i_h3_phy) { if (phy->index == 0) { val = readl(data->base + REG_PHY_UNK_H3); writel(val & ~1, data->base + REG_PHY_UNK_H3); } - - val = readl(phy->pmu + REG_PMU_UNK_H3); - writel(val & ~2, phy->pmu + REG_PMU_UNK_H3); } else { /* Enable USB 45 Ohm resistor calibration */ if (phy->index == 0) @@ -320,7 +328,10 @@ static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data) { switch (data->dr_mode) { case USB_DR_MODE_OTG: - return gpiod_get_value_cansleep(data->id_det_gpio); + if (data->id_det_gpio) + return gpiod_get_value_cansleep(data->id_det_gpio); + else + return 1; /* Fallback to peripheral mode */ case USB_DR_MODE_HOST: return 0; case USB_DR_MODE_PERIPHERAL: @@ -382,8 +393,10 @@ static int sun4i_usb_phy_power_on(struct phy *_phy) /* For phy0 only turn on Vbus if we don't have an ext. Vbus */ if (phy->index == 0 && sun4i_usb_phy0_have_vbus_det(data) && - data->vbus_det) + data->vbus_det) { + dev_warn(&_phy->dev, "External vbus detected, not enabling our own vbus\n"); return 0; + } ret = regulator_enable(phy->vbus); if (ret) @@ -419,6 +432,35 @@ static int sun4i_usb_phy_power_off(struct phy *_phy) return 0; } +static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + + if (phy->index != 0) + return -EINVAL; + + switch (mode) { + case PHY_MODE_USB_HOST: + data->dr_mode = USB_DR_MODE_HOST; + break; + case PHY_MODE_USB_DEVICE: + data->dr_mode = USB_DR_MODE_PERIPHERAL; + break; + case PHY_MODE_USB_OTG: + data->dr_mode = USB_DR_MODE_OTG; + break; + default: + return -EINVAL; + } + + dev_info(&_phy->dev, "Changing dr_mode to %d\n", (int)data->dr_mode); + data->force_session_end = true; + queue_delayed_work(system_wq, &data->detect, 0); + + return 0; +} + void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled) { struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); @@ -432,6 +474,7 @@ static const struct phy_ops sun4i_usb_phy_ops = { .exit = sun4i_usb_phy_exit, .power_on = sun4i_usb_phy_power_on, .power_off = sun4i_usb_phy_power_off, + .set_mode = sun4i_usb_phy_set_mode, .owner = THIS_MODULE, }; @@ -440,7 +483,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) struct sun4i_usb_phy_data *data = container_of(work, struct sun4i_usb_phy_data, detect.work); struct phy *phy0 = data->phys[0].phy; - int id_det, vbus_det, id_notify = 0, vbus_notify = 0; + bool force_session_end, id_notify = false, vbus_notify = false; + int id_det, vbus_det; if (phy0 == NULL) return; @@ -455,27 +499,30 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) return; } + force_session_end = data->force_session_end; + data->force_session_end = false; + if (id_det != data->id_det) { - /* - * When a host cable (id == 0) gets plugged in on systems - * without vbus detection report vbus low for long enough for - * the musb-ip to end the current device session. - */ + /* id-change, force session end if we've no vbus detection */ if (data->dr_mode == USB_DR_MODE_OTG && - !sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) { + !sun4i_usb_phy0_have_vbus_det(data)) + force_session_end = true; + + /* When entering host mode (id = 0) force end the session now */ + if (force_session_end && id_det == 0) { sun4i_usb_phy0_set_vbus_detect(phy0, 0); msleep(200); sun4i_usb_phy0_set_vbus_detect(phy0, 1); } sun4i_usb_phy0_set_id_detect(phy0, id_det); data->id_det = id_det; - id_notify = 1; + id_notify = true; } if (vbus_det != data->vbus_det) { sun4i_usb_phy0_set_vbus_detect(phy0, vbus_det); data->vbus_det = vbus_det; - vbus_notify = 1; + vbus_notify = true; } mutex_unlock(&phy0->mutex); @@ -483,13 +530,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) if (id_notify) { extcon_set_cable_state_(data->extcon, EXTCON_USB_HOST, !id_det); - /* - * When a host cable gets unplugged (id == 1) on systems - * without vbus detection report vbus low for long enough to - * the musb-ip to end the current host session. - */ - if (data->dr_mode == USB_DR_MODE_OTG && - !sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) { + /* When leaving host mode force end the session here */ + if (force_session_end && id_det == 1) { mutex_lock(&phy0->mutex); sun4i_usb_phy0_set_vbus_detect(phy0, 0); msleep(1000); @@ -534,8 +576,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev, { struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); - if (args->args[0] < data->first_phy || - args->args[0] >= data->cfg->num_phys) + if (args->args[0] >= data->cfg->num_phys) return ERR_PTR(-ENODEV); return data->phys[args->args[0]].phy; @@ -577,7 +618,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) if (!data) return -ENOMEM; - mutex_init(&data->mutex); + spin_lock_init(&data->reg_lock); INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan); dev_set_drvdata(dev, data); data->cfg = of_device_get_match_data(dev); @@ -610,33 +651,18 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) } data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0); - switch (data->dr_mode) { - case USB_DR_MODE_OTG: - /* otg without id_det makes no sense, and is not supported */ - if (!data->id_det_gpio) { - dev_err(dev, "usb0_id_det missing or invalid\n"); - return -ENODEV; - } - /* fall through */ - case USB_DR_MODE_HOST: - case USB_DR_MODE_PERIPHERAL: - data->extcon = devm_extcon_dev_allocate(dev, - sun4i_usb_phy0_cable); - if (IS_ERR(data->extcon)) - return PTR_ERR(data->extcon); - ret = devm_extcon_dev_register(dev, data->extcon); - if (ret) { - dev_err(dev, "failed to register extcon: %d\n", ret); - return ret; - } - break; - default: - dev_info(dev, "dr_mode unknown, not registering usb phy0\n"); - data->first_phy = 1; + data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable); + if (IS_ERR(data->extcon)) + return PTR_ERR(data->extcon); + + ret = devm_extcon_dev_register(dev, data->extcon); + if (ret) { + dev_err(dev, "failed to register extcon: %d\n", ret); + return ret; } - for (i = data->first_phy; i < data->cfg->num_phys; i++) { + for (i = 0; i < data->cfg->num_phys; i++) { struct sun4i_usb_phy *phy = data->phys + i; char name[16]; @@ -737,6 +763,7 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = false, + .enable_pmu_unk1 = false, }; static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { @@ -745,6 +772,7 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { .disc_thresh = 2, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = false, + .enable_pmu_unk1 = false, }; static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { @@ -753,6 +781,7 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = true, + .enable_pmu_unk1 = false, }; static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { @@ -761,6 +790,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { .disc_thresh = 2, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = false, + .enable_pmu_unk1 = false, }; static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { @@ -769,6 +799,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = true, + .enable_pmu_unk1 = false, }; static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { @@ -777,6 +808,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, + .enable_pmu_unk1 = false, }; static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { @@ -784,6 +816,16 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { .type = sun8i_h3_phy, .disc_thresh = 3, .dedicated_clocks = true, + .enable_pmu_unk1 = true, +}; + +static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { + .num_phys = 2, + .type = sun50i_a64_phy, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, + .enable_pmu_unk1 = true, }; static const struct of_device_id sun4i_usb_phy_of_match[] = { @@ -794,6 +836,8 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg }, { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg }, { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg }, + { .compatible = "allwinner,sun50i-a64-usb-phy", + .data = &sun50i_a64_cfg}, { }, }; MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index d9b10a39a2cf..87e6334eab93 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -172,6 +172,7 @@ struct twl4030_usb { int irq; enum musb_vbus_id_status linkstat; bool vbus_supplied; + bool musb_mailbox_pending; struct delayed_work id_workaround_work; }; @@ -439,6 +440,17 @@ static int __maybe_unused twl4030_usb_runtime_resume(struct device *dev) (PHY_CLK_CTRL_CLOCKGATING_EN | PHY_CLK_CTRL_CLK32K_EN)); + twl4030_i2c_access(twl, 1); + twl4030_usb_set_mode(twl, twl->usb_mode); + if (twl->usb_mode == T2_USB_MODE_ULPI) + twl4030_i2c_access(twl, 0); + /* + * According to the TPS65950 TRM, there has to be at least 50ms + * delay between setting POWER_CTRL_OTG_ENAB and enabling charging + * so wait here so that a fully enabled phy can be expected after + * resume + */ + msleep(50); return 0; } @@ -459,11 +471,6 @@ static int twl4030_phy_power_on(struct phy *phy) dev_dbg(twl->dev, "%s\n", __func__); pm_runtime_get_sync(twl->dev); - twl4030_i2c_access(twl, 1); - twl4030_usb_set_mode(twl, twl->usb_mode); - if (twl->usb_mode == T2_USB_MODE_ULPI) - twl4030_i2c_access(twl, 0); - twl->linkstat = MUSB_UNKNOWN; schedule_delayed_work(&twl->id_workaround_work, HZ); return 0; @@ -569,9 +576,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) pm_runtime_mark_last_busy(twl->dev); pm_runtime_put_autosuspend(twl->dev); } + twl->musb_mailbox_pending = true; + } + if (twl->musb_mailbox_pending) { err = musb_mailbox(status); - if (err) - twl->linkstat = MUSB_UNKNOWN; + if (!err) + twl->musb_mailbox_pending = false; } /* don't schedule during sleep - irq works right then */ @@ -676,6 +686,7 @@ static int twl4030_usb_probe(struct platform_device *pdev) twl->irq = platform_get_irq(pdev, 0); twl->vbus_supplied = false; twl->linkstat = MUSB_UNKNOWN; + twl->musb_mailbox_pending = false; twl->phy.dev = twl->dev; twl->phy.label = "twl4030"; diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index ec83dfdbc206..873424ab0e32 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -18,6 +18,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/phy/phy.h> +#include <linux/phy/tegra/xusb.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> #include <linux/reset.h> @@ -101,7 +102,8 @@ tegra_xusb_pad_find_phy_node(struct tegra_xusb_pad *pad, unsigned int index) return of_find_node_by_name(np, pad->soc->lanes[index].name); } -int tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane, +static int +tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane, const char *function) { unsigned int i; diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 8689dcba5201..644e978cbd3e 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -152,7 +152,8 @@ source "drivers/usb/gadget/Kconfig" config USB_LED_TRIG bool "USB LED Triggers" - depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS + depends on LEDS_CLASS && LEDS_TRIGGERS + select USB_COMMON help This option adds LED triggers for USB host and/or gadget activity. @@ -160,4 +161,25 @@ config USB_LED_TRIG LEDs and you want to use them as activity indicators for USB host or gadget. +config USB_ULPI_BUS + tristate "USB ULPI PHY interface support" + select USB_COMMON + help + UTMI+ Low Pin Interface (ULPI) is specification for a commonly used + USB 2.0 PHY interface. The ULPI specification defines a standard set + of registers that can be used to detect the vendor and product which + allows ULPI to be handled as a bus. This module is the driver for that + bus. + + The ULPI interfaces (the buses) are registered by the drivers for USB + controllers which support ULPI register access and have ULPI PHY + attached to them. The ULPI PHY drivers themselves are normal PHY + drivers. + + ULPI PHYs provide often functions such as ADP sensing/probing (OTG + protocol) and USB charger detection. + + To compile this driver as a module, choose M here: the module will + be called ulpi. + endif # USB_SUPPORT diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 0a866e90b49c..f9fe86b6f7b5 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -1139,10 +1139,8 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance, /* instance init */ instance = kzalloc(sizeof(*instance), GFP_KERNEL); - if (!instance) { - usb_dbg(usbatm_instance, "cxacru_bind: no memory for instance data\n"); + if (!instance) return -ENOMEM; - } instance->usbatm = usbatm_instance; instance->modem_type = (struct cxacru_modem_type *) id->driver_info; @@ -1168,13 +1166,11 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance, } instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL); if (!instance->rcv_urb) { - usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_urb\n"); ret = -ENOMEM; goto fail; } instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL); if (!instance->snd_urb) { - usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_urb\n"); ret = -ENOMEM; goto fail; } diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 0270d1312f83..5083eb5b0d5e 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -817,7 +817,6 @@ static int speedtch_bind(struct usbatm_data *usbatm, instance = kzalloc(sizeof(*instance), GFP_KERNEL); if (!instance) { - usb_err(usbatm, "%s: no memory for instance data!\n", __func__); ret = -ENOMEM; goto fail_release; } diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 4333dc576a12..df67815f74e6 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -2196,17 +2196,12 @@ static int uea_boot(struct uea_softc *sc) load_XILINX_firmware(sc); intr = kmalloc(size, GFP_KERNEL); - if (!intr) { - uea_err(INS_TO_USBDEV(sc), - "cannot allocate interrupt package\n"); + if (!intr) goto err0; - } sc->urb_int = usb_alloc_urb(0, GFP_KERNEL); - if (!sc->urb_int) { - uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n"); + if (!sc->urb_int) goto err1; - } usb_fill_int_urb(sc->urb_int, sc->usb_dev, usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE), @@ -2561,10 +2556,8 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf, } sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL); - if (!sc) { - uea_err(usb, "uea_init: not enough memory !\n"); + if (!sc) return -ENOMEM; - } sc->usb_dev = usb; usbatm->driver_data = sc; diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index db322d9ccb6e..4dec9df8764b 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -819,7 +819,6 @@ static int usbatm_atm_open(struct atm_vcc *vcc) new = kzalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL); if (!new) { - atm_err(instance, "%s: no memory for vcc_data!\n", __func__); ret = -ENOMEM; goto fail; } @@ -1032,10 +1031,8 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, /* instance init */ instance = kzalloc(sizeof(*instance) + sizeof(struct urb *) * (num_rcv_urbs + num_snd_urbs), GFP_KERNEL); - if (!instance) { - dev_err(dev, "%s: no memory for instance data!\n", __func__); + if (!instance) return -ENOMEM; - } /* public fields */ @@ -1141,7 +1138,6 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, urb = usb_alloc_urb(iso_packets, GFP_KERNEL); if (!urb) { - dev_err(dev, "%s: no memory for urb %d!\n", __func__, i); error = -ENOMEM; goto fail_unbind; } @@ -1151,7 +1147,6 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, /* zero the tx padding to avoid leaking information */ buffer = kzalloc(channel->buf_size, GFP_KERNEL); if (!buffer) { - dev_err(dev, "%s: no memory for buffer %d!\n", __func__, i); error = -ENOMEM; goto fail_unbind; } @@ -1182,7 +1177,6 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, instance->cell_buf = kmalloc(instance->rx_channel.stride, GFP_KERNEL); if (!instance->cell_buf) { - dev_err(dev, "%s: no memory for cell buffer!\n", __func__); error = -ENOMEM; goto fail_unbind; } diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index dedc33e589f4..099179457f60 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -140,6 +140,9 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev) if (of_find_property(np, "disable-over-current", NULL)) data->disable_oc = 1; + if (of_find_property(np, "over-current-active-high", NULL)) + data->oc_polarity = 1; + if (of_find_property(np, "external-vbus-divider", NULL)) data->evdo = 1; diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h index 635717e9354a..409aa5ca8dda 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.h +++ b/drivers/usb/chipidea/ci_hdrc_imx.h @@ -17,6 +17,7 @@ struct imx_usbmisc_data { int index; unsigned int disable_oc:1; /* over current detect disabled */ + unsigned int oc_polarity:1; /* over current polarity if oc enabled */ unsigned int evdo:1; /* set external vbus divider option */ }; diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 053bac9d983c..96ae69502c86 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -81,12 +81,15 @@ static int ehci_ci_reset(struct usb_hcd *hcd) { struct device *dev = hcd->self.controller; struct ci_hdrc *ci = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); int ret; ret = ehci_setup(hcd); if (ret) return ret; + ehci->need_io_watchdog = 0; + ci_platform_configure(ci); return ret; diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index b93356834bb5..661f43fe0f9e 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -59,7 +59,7 @@ ctrl_endpt_in_desc = { */ static inline int hw_ep_bit(int num, int dir) { - return num + (dir ? 16 : 0); + return num + ((dir == TX) ? 16 : 0); } static inline int ep_to_bit(struct ci_hdrc *ci, int n) @@ -121,9 +121,8 @@ static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir) */ static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir) { - hw_ep_flush(ci, num, dir); hw_write(ci, OP_ENDPTCTRL + num, - dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); + (dir == TX) ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); return 0; } @@ -139,7 +138,7 @@ static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type) { u32 mask, data; - if (dir) { + if (dir == TX) { mask = ENDPTCTRL_TXT; /* type */ data = type << __ffs(mask); @@ -171,7 +170,7 @@ static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type) */ static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir) { - u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; + u32 mask = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0; } @@ -188,6 +187,9 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl) { int n = hw_ep_bit(num, dir); + /* Synchronize before ep prime */ + wmb(); + if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; @@ -218,8 +220,8 @@ static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value) do { enum ci_hw_regs reg = OP_ENDPTCTRL + num; - u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; - u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; + u32 mask_xs = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; + u32 mask_xr = (dir == TX) ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; /* data toggle - reserved for EP0 but it's in ESS */ hw_write(ci, reg, mask_xs|mask_xr, @@ -348,8 +350,7 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq, if (node == NULL) return -ENOMEM; - node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, - &node->dma); + node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, &node->dma); if (node->ptr == NULL) { kfree(node); return -ENOMEM; @@ -506,8 +507,6 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) hwep->qh.ptr->cap |= mul << __ffs(QH_MULT); } - wmb(); /* synchronize before ep prime */ - ret = hw_ep_prime(ci, hwep->num, hwep->dir, hwep->type == USB_ENDPOINT_XFER_CONTROL); done: @@ -534,9 +533,6 @@ static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep, hwep->qh.ptr->td.token &= cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE)); - /* Synchronize before ep prime */ - wmb(); - return hw_ep_prime(ci, hwep->num, hwep->dir, hwep->type == USB_ENDPOINT_XFER_CONTROL); } @@ -590,7 +586,7 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) } if (remaining_length) { - if (hwep->dir) { + if (hwep->dir == TX) { hwreq->req.status = -EPROTO; break; } @@ -1051,9 +1047,9 @@ __acquires(ci->lock) if (req.wLength != 0) break; num = le16_to_cpu(req.wIndex); - dir = num & USB_ENDPOINT_DIR_MASK; + dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX; num &= USB_ENDPOINT_NUMBER_MASK; - if (dir) /* TX */ + if (dir == TX) num += ci->hw_ep_max / 2; if (!ci->ci_hw_ep[num].wedge) { spin_unlock(&ci->lock); @@ -1103,9 +1099,9 @@ __acquires(ci->lock) if (req.wLength != 0) break; num = le16_to_cpu(req.wIndex); - dir = num & USB_ENDPOINT_DIR_MASK; + dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX; num &= USB_ENDPOINT_NUMBER_MASK; - if (dir) /* TX */ + if (dir == TX) num += ci->hw_ep_max / 2; spin_unlock(&ci->lock); @@ -1680,12 +1676,10 @@ static int init_eps(struct ci_hdrc *ci) usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0); INIT_LIST_HEAD(&hwep->qh.queue); - hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL, - &hwep->qh.dma); + hwep->qh.ptr = dma_pool_zalloc(ci->qh_pool, GFP_KERNEL, + &hwep->qh.dma); if (hwep->qh.ptr == NULL) retval = -ENOMEM; - else - memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr)); /* * set up shorthands for ep0 out and in endpoints, @@ -1999,7 +1993,7 @@ int ci_hdrc_gadget_init(struct ci_hdrc *ci) if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC)) return -ENXIO; - rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL); + rdrv = devm_kzalloc(ci->dev, sizeof(*rdrv), GFP_KERNEL); if (!rdrv) return -ENOMEM; diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index ab8b027e8cc8..20d02a5e418d 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -56,6 +56,7 @@ #define MX6_BM_NON_BURST_SETTING BIT(1) #define MX6_BM_OVER_CUR_DIS BIT(7) +#define MX6_BM_OVER_CUR_POLARITY BIT(8) #define MX6_BM_WAKEUP_ENABLE BIT(10) #define MX6_BM_ID_WAKEUP BIT(16) #define MX6_BM_VBUS_WAKEUP BIT(17) @@ -266,11 +267,14 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) spin_lock_irqsave(&usbmisc->lock, flags); + reg = readl(usbmisc->base + data->index * 4); if (data->disable_oc) { - reg = readl(usbmisc->base + data->index * 4); - writel(reg | MX6_BM_OVER_CUR_DIS, - usbmisc->base + data->index * 4); + reg |= MX6_BM_OVER_CUR_DIS; + } else if (data->oc_polarity == 1) { + /* High active */ + reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY); } + writel(reg, usbmisc->base + data->index * 4); /* SoC non-burst setting */ reg = readl(usbmisc->base + data->index * 4); @@ -365,10 +369,14 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) return -EINVAL; spin_lock_irqsave(&usbmisc->lock, flags); + reg = readl(usbmisc->base); if (data->disable_oc) { - reg = readl(usbmisc->base); - writel(reg | MX6_BM_OVER_CUR_DIS, usbmisc->base); + reg |= MX6_BM_OVER_CUR_DIS; + } else if (data->oc_polarity == 1) { + /* High active */ + reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY); } + writel(reg, usbmisc->base); reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK; @@ -492,6 +500,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = { .compatible = "fsl,imx6ul-usbmisc", .data = &imx6sx_usbmisc_ops, }, + { + .compatible = "fsl,imx7d-usbmisc", + .data = &imx7d_usbmisc_ops, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 0f3f62e81e5b..78f0f85bebdc 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -368,17 +368,17 @@ static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags) if (!test_and_clear_bit(index, &acm->read_urbs_free)) return 0; - dev_vdbg(&acm->data->dev, "%s - urb %d\n", __func__, index); - res = usb_submit_urb(acm->read_urbs[index], mem_flags); if (res) { if (res != -EPERM) { dev_err(&acm->data->dev, - "%s - usb_submit_urb failed: %d\n", - __func__, res); + "urb %d failed submission with %d\n", + index, res); } set_bit(index, &acm->read_urbs_free); return res; + } else { + dev_vdbg(&acm->data->dev, "submitted urb %d\n", index); } return 0; @@ -415,8 +415,9 @@ static void acm_read_bulk_callback(struct urb *urb) unsigned long flags; int status = urb->status; - dev_vdbg(&acm->data->dev, "%s - urb %d, len %d\n", __func__, - rb->index, urb->actual_length); + dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n", + rb->index, urb->actual_length, + status); if (!acm->dev) { set_bit(rb->index, &acm->read_urbs_free); @@ -426,8 +427,6 @@ static void acm_read_bulk_callback(struct urb *urb) if (status) { set_bit(rb->index, &acm->read_urbs_free); - dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n", - __func__, status); if ((status != -ENOENT) || (urb->actual_length == 0)) return; } @@ -462,8 +461,7 @@ static void acm_write_bulk(struct urb *urb) int status = urb->status; if (status || (urb->actual_length != urb->transfer_buffer_length)) - dev_vdbg(&acm->data->dev, "%s - len %d/%d, status %d\n", - __func__, + dev_vdbg(&acm->data->dev, "wrote len %d/%d, status %d\n", urb->actual_length, urb->transfer_buffer_length, status); @@ -478,8 +476,6 @@ static void acm_softint(struct work_struct *work) { struct acm *acm = container_of(work, struct acm, work); - dev_vdbg(&acm->data->dev, "%s\n", __func__); - tty_port_tty_wakeup(&acm->port); } @@ -492,8 +488,6 @@ static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty) struct acm *acm; int retval; - dev_dbg(tty->dev, "%s\n", __func__); - acm = acm_get_by_minor(tty->index); if (!acm) return -ENODEV; @@ -515,8 +509,6 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) { struct acm *acm = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); - return tty_port_open(&acm->port, tty, filp); } @@ -545,8 +537,6 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) int retval = -ENODEV; int i; - dev_dbg(&acm->control->dev, "%s\n", __func__); - mutex_lock(&acm->mutex); if (acm->disconnected) goto disconnected; @@ -607,8 +597,6 @@ static void acm_port_destruct(struct tty_port *port) { struct acm *acm = container_of(port, struct acm, port); - dev_dbg(&acm->control->dev, "%s\n", __func__); - acm_release_minor(acm); usb_put_intf(acm->control); kfree(acm->country_codes); @@ -622,8 +610,6 @@ static void acm_port_shutdown(struct tty_port *port) struct acm_wb *wb; int i; - dev_dbg(&acm->control->dev, "%s\n", __func__); - /* * Need to grab write_lock to prevent race with resume, but no need to * hold it due to the tty-port initialised flag. @@ -654,21 +640,21 @@ static void acm_port_shutdown(struct tty_port *port) static void acm_tty_cleanup(struct tty_struct *tty) { struct acm *acm = tty->driver_data; - dev_dbg(&acm->control->dev, "%s\n", __func__); + tty_port_put(&acm->port); } static void acm_tty_hangup(struct tty_struct *tty) { struct acm *acm = tty->driver_data; - dev_dbg(&acm->control->dev, "%s\n", __func__); + tty_port_hangup(&acm->port); } static void acm_tty_close(struct tty_struct *tty, struct file *filp) { struct acm *acm = tty->driver_data; - dev_dbg(&acm->control->dev, "%s\n", __func__); + tty_port_close(&acm->port, tty, filp); } @@ -684,7 +670,7 @@ static int acm_tty_write(struct tty_struct *tty, if (!count) return 0; - dev_vdbg(&acm->data->dev, "%s - count %d\n", __func__, count); + dev_vdbg(&acm->data->dev, "%d bytes from tty layer\n", count); spin_lock_irqsave(&acm->write_lock, flags); wbn = acm_wb_alloc(acm); @@ -701,7 +687,7 @@ static int acm_tty_write(struct tty_struct *tty, } count = (count > acm->writesize) ? acm->writesize : count; - dev_vdbg(&acm->data->dev, "%s - write %d\n", __func__, count); + dev_vdbg(&acm->data->dev, "writing %d bytes\n", count); memcpy(wb->buf, buf, count); wb->len = count; @@ -1193,6 +1179,9 @@ static int acm_probe(struct usb_interface *intf, return -EINVAL; } + if (!intf->cur_altsetting) + return -EINVAL; + if (!buflen) { if (intf->cur_altsetting->endpoint && intf->cur_altsetting->endpoint->extralen && @@ -1246,6 +1235,8 @@ static int acm_probe(struct usb_interface *intf, dev_dbg(&intf->dev, "no interfaces\n"); return -ENODEV; } + if (!data_interface->cur_altsetting || !control_interface->cur_altsetting) + return -ENODEV; if (data_intf_num != call_intf_num) dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n"); @@ -1533,8 +1524,6 @@ static void stop_data_traffic(struct acm *acm) { int i; - dev_dbg(&acm->control->dev, "%s\n", __func__); - usb_kill_urb(acm->ctrlurb); for (i = 0; i < ACM_NW; i++) usb_kill_urb(acm->wb[i].urb); @@ -1551,8 +1540,6 @@ static void acm_disconnect(struct usb_interface *intf) struct tty_struct *tty; int i; - dev_dbg(&intf->dev, "%s\n", __func__); - /* sibling interface is already cleaning up */ if (!acm) return; diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 337948c42110..0a6369510f2d 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -58,6 +58,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids); #define WDM_SUSPENDING 8 #define WDM_RESETTING 9 #define WDM_OVERFLOW 10 +#define WDM_DRAIN_ON_OPEN 11 #define WDM_MAX 16 @@ -154,6 +155,9 @@ static void wdm_out_callback(struct urb *urb) wake_up(&desc->wait); } +/* forward declaration */ +static int service_outstanding_interrupt(struct wdm_device *desc); + static void wdm_in_callback(struct urb *urb) { struct wdm_device *desc = urb->context; @@ -167,18 +171,18 @@ static void wdm_in_callback(struct urb *urb) switch (status) { case -ENOENT: dev_dbg(&desc->intf->dev, - "nonzero urb status received: -ENOENT"); + "nonzero urb status received: -ENOENT\n"); goto skip_error; case -ECONNRESET: dev_dbg(&desc->intf->dev, - "nonzero urb status received: -ECONNRESET"); + "nonzero urb status received: -ECONNRESET\n"); goto skip_error; case -ESHUTDOWN: dev_dbg(&desc->intf->dev, - "nonzero urb status received: -ESHUTDOWN"); + "nonzero urb status received: -ESHUTDOWN\n"); goto skip_error; case -EPIPE: - dev_err(&desc->intf->dev, + dev_dbg(&desc->intf->dev, "nonzero urb status received: -EPIPE\n"); break; default: @@ -188,7 +192,13 @@ static void wdm_in_callback(struct urb *urb) } } - desc->rerr = status; + /* + * only set a new error if there is no previous error. + * Errors are only cleared during read/open + */ + if (desc->rerr == 0) + desc->rerr = status; + if (length + desc->length > desc->wMaxCommand) { /* The buffer would overflow */ set_bit(WDM_OVERFLOW, &desc->flags); @@ -200,10 +210,40 @@ static void wdm_in_callback(struct urb *urb) desc->reslength = length; } } + + /* + * Handling devices with the WDM_DRAIN_ON_OPEN flag set: + * If desc->resp_count is unset, then the urb was submitted + * without a prior notification. If the device returned any + * data, then this implies that it had messages queued without + * notifying us. Continue reading until that queue is flushed. + */ + if (!desc->resp_count) { + if (!length) { + /* do not propagate the expected -EPIPE */ + desc->rerr = 0; + goto unlock; + } + dev_dbg(&desc->intf->dev, "got %d bytes without notification\n", length); + set_bit(WDM_RESPONDING, &desc->flags); + usb_submit_urb(desc->response, GFP_ATOMIC); + } + skip_error: + set_bit(WDM_READ, &desc->flags); wake_up(&desc->wait); - set_bit(WDM_READ, &desc->flags); + if (desc->rerr) { + /* + * Since there was an error, userspace may decide to not read + * any data after poll'ing. + * We should respond to further attempts from the device to send + * data, so that we can get unstuck. + */ + service_outstanding_interrupt(desc); + } + +unlock: spin_unlock(&desc->iuspin); } @@ -244,18 +284,18 @@ static void wdm_int_callback(struct urb *urb) switch (dr->bNotificationType) { case USB_CDC_NOTIFY_RESPONSE_AVAILABLE: dev_dbg(&desc->intf->dev, - "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d", + "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d\n", le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength)); break; case USB_CDC_NOTIFY_NETWORK_CONNECTION: dev_dbg(&desc->intf->dev, - "NOTIFY_NETWORK_CONNECTION %s network", + "NOTIFY_NETWORK_CONNECTION %s network\n", dr->wValue ? "connected to" : "disconnected from"); goto exit; case USB_CDC_NOTIFY_SPEED_CHANGE: - dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)", + dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)\n", urb->actual_length); goto exit; default: @@ -274,8 +314,7 @@ static void wdm_int_callback(struct urb *urb) && !test_bit(WDM_DISCONNECTING, &desc->flags) && !test_bit(WDM_SUSPENDING, &desc->flags)) { rv = usb_submit_urb(desc->response, GFP_ATOMIC); - dev_dbg(&desc->intf->dev, "%s: usb_submit_urb %d", - __func__, rv); + dev_dbg(&desc->intf->dev, "submit response URB %d\n", rv); } spin_unlock(&desc->iuspin); if (rv < 0) { @@ -417,7 +456,7 @@ static ssize_t wdm_write rv = usb_translate_errors(rv); goto out_free_mem_pm; } else { - dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d", + dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d\n", le16_to_cpu(req->wIndex)); } @@ -436,17 +475,14 @@ out_free_mem: } /* - * clear WDM_READ flag and possibly submit the read urb if resp_count - * is non-zero. + * Submit the read urb if resp_count is non-zero. * * Called with desc->iuspin locked */ -static int clear_wdm_read_flag(struct wdm_device *desc) +static int service_outstanding_interrupt(struct wdm_device *desc) { int rv = 0; - clear_bit(WDM_READ, &desc->flags); - /* submit read urb only if the device is waiting for it */ if (!desc->resp_count || !--desc->resp_count) goto out; @@ -537,8 +573,9 @@ retry: } if (!desc->reslength) { /* zero length read */ - dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__); - rv = clear_wdm_read_flag(desc); + dev_dbg(&desc->intf->dev, "zero length - clearing WDM_READ\n"); + clear_bit(WDM_READ, &desc->flags); + rv = service_outstanding_interrupt(desc); spin_unlock_irq(&desc->iuspin); if (rv < 0) goto err; @@ -563,8 +600,10 @@ retry: desc->length -= cntr; /* in case we had outstanding data */ - if (!desc->length) - clear_wdm_read_flag(desc); + if (!desc->length) { + clear_bit(WDM_READ, &desc->flags); + service_outstanding_interrupt(desc); + } spin_unlock_irq(&desc->iuspin); rv = cntr; @@ -647,6 +686,17 @@ static int wdm_open(struct inode *inode, struct file *file) dev_err(&desc->intf->dev, "Error submitting int urb - %d\n", rv); rv = usb_translate_errors(rv); + } else if (test_bit(WDM_DRAIN_ON_OPEN, &desc->flags)) { + /* + * Some devices keep pending messages queued + * without resending notifications. We must + * flush the message queue before we can + * assume a one-to-one relationship between + * notifications and messages in the queue + */ + dev_dbg(&desc->intf->dev, "draining queued data\n"); + set_bit(WDM_RESPONDING, &desc->flags); + rv = usb_submit_urb(desc->response, GFP_KERNEL); } } else { rv = 0; @@ -673,7 +723,7 @@ static int wdm_release(struct inode *inode, struct file *file) if (!desc->count) { if (!test_bit(WDM_DISCONNECTING, &desc->flags)) { - dev_dbg(&desc->intf->dev, "wdm_release: cleanup"); + dev_dbg(&desc->intf->dev, "wdm_release: cleanup\n"); kill_urbs(desc); spin_lock_irq(&desc->iuspin); desc->resp_count = 0; @@ -753,7 +803,8 @@ static void wdm_rxwork(struct work_struct *work) /* --- hotplug --- */ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor *ep, - u16 bufsize, int (*manage_power)(struct usb_interface *, int)) + u16 bufsize, int (*manage_power)(struct usb_interface *, int), + bool drain_on_open) { int rv = -ENOMEM; struct wdm_device *desc; @@ -840,6 +891,68 @@ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor desc->manage_power = manage_power; + /* + * "drain_on_open" enables a hack to work around a firmware + * issue observed on network functions, in particular MBIM + * functions. + * + * Quoting section 7 of the CDC-WMC r1.1 specification: + * + * "The firmware shall interpret GetEncapsulatedResponse as a + * request to read response bytes. The firmware shall send + * the next wLength bytes from the response. The firmware + * shall allow the host to retrieve data using any number of + * GetEncapsulatedResponse requests. The firmware shall + * return a zero- length reply if there are no data bytes + * available. + * + * The firmware shall send ResponseAvailable notifications + * periodically, using any appropriate algorithm, to inform + * the host that there is data available in the reply + * buffer. The firmware is allowed to send ResponseAvailable + * notifications even if there is no data available, but + * this will obviously reduce overall performance." + * + * These requirements, although they make equally sense, are + * often not implemented by network functions. Some firmwares + * will queue data indefinitely, without ever resending a + * notification. The result is that the driver and firmware + * loses "syncronization" if the driver ever fails to respond + * to a single notification, something which easily can happen + * on release(). When this happens, the driver will appear to + * never receive notifications for the most current data. Each + * notification will only cause a single read, which returns + * the oldest data in the firmware's queue. + * + * The "drain_on_open" hack resolves the situation by draining + * data from the firmware until none is returned, without a + * prior notification. + * + * This will inevitably race with the firmware, risking that + * we read data from the device before handling the associated + * notification. To make things worse, some of the devices + * needing the hack do not implement the "return zero if no + * data is available" requirement either. Instead they return + * an error on the subsequent read in this case. This means + * that "winning" the race can cause an unexpected EIO to + * userspace. + * + * "winning" the race is more likely on resume() than on + * open(), and the unexpected error is more harmful in the + * middle of an open session. The hack is therefore only + * applied on open(), and not on resume() where it logically + * would be equally necessary. So we define open() as the only + * driver <-> device "syncronization point". Should we happen + * to lose a notification after open(), then syncronization + * will be lost until release() + * + * The hack should not be enabled for CDC WDM devices + * conforming to the CDC-WMC r1.1 specification. This is + * ensured by setting drain_on_open to false in wdm_probe(). + */ + if (drain_on_open) + set_bit(WDM_DRAIN_ON_OPEN, &desc->flags); + spin_lock(&wdm_device_list_lock); list_add(&desc->device_list, &wdm_device_list); spin_unlock(&wdm_device_list_lock); @@ -893,7 +1006,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) goto err; ep = &iface->endpoint[0].desc; - rv = wdm_create(intf, ep, maxcom, &wdm_manage_power); + rv = wdm_create(intf, ep, maxcom, &wdm_manage_power, false); err: return rv; @@ -925,7 +1038,7 @@ struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf, { int rv = -EINVAL; - rv = wdm_create(intf, ep, bufsize, manage_power); + rv = wdm_create(intf, ep, bufsize, manage_power, true); if (rv < 0) goto err; @@ -967,7 +1080,7 @@ static void wdm_disconnect(struct usb_interface *intf) if (!desc->count) cleanup(desc); else - dev_dbg(&intf->dev, "%s: %d open files - postponing cleanup\n", __func__, desc->count); + dev_dbg(&intf->dev, "%d open files - postponing cleanup\n", desc->count); mutex_unlock(&wdm_mutex); } diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 917a55c4480d..a6c1fae7d52a 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -141,6 +141,7 @@ static void usbtmc_delete(struct kref *kref) struct usbtmc_device_data *data = to_usbtmc_data(kref); usb_put_dev(data->usb_dev); + kfree(data); } static int usbtmc_open(struct inode *inode, struct file *filp) @@ -1379,7 +1380,7 @@ static int usbtmc_probe(struct usb_interface *intf, dev_dbg(&intf->dev, "%s called\n", __func__); - data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL); + data = kmalloc(sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; @@ -1467,10 +1468,8 @@ static int usbtmc_probe(struct usb_interface *intf, if (data->iin_ep_present) { /* allocate int urb */ data->iin_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!data->iin_urb) { - dev_err(&intf->dev, "Failed to allocate int urb\n"); + if (!data->iin_urb) goto error_register; - } /* will reference data in int urb */ kref_get(&data->kref); @@ -1478,10 +1477,8 @@ static int usbtmc_probe(struct usb_interface *intf, /* allocate buffer for interrupt in */ data->iin_buffer = kmalloc(data->iin_wMaxPacketSize, GFP_KERNEL); - if (!data->iin_buffer) { - dev_err(&intf->dev, "Failed to allocate int buf\n"); + if (!data->iin_buffer) goto error_register; - } /* fill interrupt urb */ usb_fill_int_urb(data->iin_urb, data->usb_dev, diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c index 01c0c0477a9e..8b317702d761 100644 --- a/drivers/usb/common/ulpi.c +++ b/drivers/usb/common/ulpi.c @@ -21,13 +21,13 @@ int ulpi_read(struct ulpi *ulpi, u8 addr) { - return ulpi->ops->read(ulpi->ops, addr); + return ulpi->ops->read(ulpi->dev.parent, addr); } EXPORT_SYMBOL_GPL(ulpi_read); int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) { - return ulpi->ops->write(ulpi->ops, addr, val); + return ulpi->ops->write(ulpi->dev.parent, addr, val); } EXPORT_SYMBOL_GPL(ulpi_write); @@ -127,16 +127,17 @@ static struct device_type ulpi_dev_type = { * * Registers a driver with the ULPI bus. */ -int ulpi_register_driver(struct ulpi_driver *drv) +int __ulpi_register_driver(struct ulpi_driver *drv, struct module *module) { if (!drv->probe) return -EINVAL; + drv->driver.owner = module; drv->driver.bus = &ulpi_bus; return driver_register(&drv->driver); } -EXPORT_SYMBOL_GPL(ulpi_register_driver); +EXPORT_SYMBOL_GPL(__ulpi_register_driver); /** * ulpi_unregister_driver - unregister a driver with the ULPI bus @@ -156,6 +157,8 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi) { int ret; + ulpi->dev.parent = dev; /* needed early for ops */ + /* Test the interface */ ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa); if (ret < 0) @@ -174,7 +177,6 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi) ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW); ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8; - ulpi->dev.parent = dev; ulpi->dev.bus = &ulpi_bus; ulpi->dev.type = &ulpi_dev_type; dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev)); @@ -201,7 +203,8 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi) * Allocates and registers a ULPI device and an interface for it. Called from * the USB controller that provides the ULPI interface. */ -struct ulpi *ulpi_register_interface(struct device *dev, struct ulpi_ops *ops) +struct ulpi *ulpi_register_interface(struct device *dev, + const struct ulpi_ops *ops) { struct ulpi *ulpi; int ret; @@ -211,7 +214,6 @@ struct ulpi *ulpi_register_interface(struct device *dev, struct ulpi_ops *ops) return ERR_PTR(-ENOMEM); ulpi->ops = ops; - ops->dev = dev; ret = ulpi_register(dev, ulpi); if (ret) { diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index dd280108758f..0e5a889742b3 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -83,23 +83,10 @@ config USB_OTG_FSM Implements OTG Finite State Machine as specified in On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification. -config USB_ULPI_BUS - tristate "USB ULPI PHY interface support" - depends on USB_SUPPORT +config USB_LEDS_TRIGGER_USBPORT + tristate "USB port LED trigger" + depends on USB && LEDS_TRIGGERS help - UTMI+ Low Pin Interface (ULPI) is specification for a commonly used - USB 2.0 PHY interface. The ULPI specification defines a standard set - of registers that can be used to detect the vendor and product which - allows ULPI to be handled as a bus. This module is the driver for that - bus. - - The ULPI interfaces (the buses) are registered by the drivers for USB - controllers which support ULPI register access and have ULPI PHY - attached to them. The ULPI PHY drivers themselves are normal PHY - drivers. - - ULPI PHYs provide often functions such as ADP sensing/probing (OTG - protocol) and USB charger detection. - - To compile this driver as a module, choose M here: the module will - be called ulpi. + This driver allows LEDs to be controlled by USB events. Enabling this + trigger allows specifying list of USB ports that should turn on LED + when some USB device gets connected. diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index 9780877010b4..b99b871c4b9d 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -5,9 +5,12 @@ usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o usbcore-y += devio.o notify.o generic.o quirks.o devices.o -usbcore-y += port.o of.o +usbcore-y += port.o +usbcore-$(CONFIG_OF) += of.o usbcore-$(CONFIG_PCI) += hcd-pci.o usbcore-$(CONFIG_ACPI) += usb-acpi.o obj-$(CONFIG_USB) += usbcore.o + +obj-$(CONFIG_USB_LEDS_TRIGGER_USBPORT) += ledtrig-usbport.o diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index d2e3f655c26f..479e223f9cff 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -46,6 +46,7 @@ #include <linux/usb.h> #include <linux/usb/hcd.h> #include <linux/usb/phy.h> +#include <linux/usb/otg.h> #include "usb.h" @@ -2517,10 +2518,8 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, struct usb_hcd *hcd; hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL); - if (!hcd) { - dev_dbg (dev, "hcd alloc failed\n"); + if (!hcd) return NULL; - } if (primary_hcd == NULL) { hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex), GFP_KERNEL); @@ -3033,7 +3032,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown); /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) +#if IS_ENABLED(CONFIG_USB_MON) const struct usb_mon_operations *mon_ops; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1d5fc32d06d0..cbb146736f57 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1823,10 +1823,8 @@ descriptor_error: dev_info(&intf->dev, "USB hub found\n"); hub = kzalloc(sizeof(*hub), GFP_KERNEL); - if (!hub) { - dev_dbg(&intf->dev, "couldn't kmalloc hub struct\n"); + if (!hub) return -ENOMEM; - } kref_init(&hub->kref); hub->intfdev = &intf->dev; @@ -3106,7 +3104,7 @@ static int usb_disable_remote_wakeup(struct usb_device *udev) USB_CTRL_SET_TIMEOUT); else return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - USB_REQ_CLEAR_FEATURE, USB_RECIP_INTERFACE, + USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE, USB_INTRF_FUNC_SUSPEND, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); } @@ -5337,11 +5335,10 @@ static int descriptors_changed(struct usb_device *udev, } buf = kmalloc(len, GFP_NOIO); - if (buf == NULL) { - dev_err(&udev->dev, "no mem to re-read configs after reset\n"); + if (!buf) /* assume the worst */ return 1; - } + for (index = 0; index < udev->descriptor.bNumConfigurations; index++) { old_length = le16_to_cpu(udev->config[index].desc.wTotalLength); length = usb_get_descriptor(udev, USB_DT_CONFIG, index, buf, diff --git a/drivers/usb/core/ledtrig-usbport.c b/drivers/usb/core/ledtrig-usbport.c new file mode 100644 index 000000000000..3ed5162677ad --- /dev/null +++ b/drivers/usb/core/ledtrig-usbport.c @@ -0,0 +1,314 @@ +/* + * USB port LED trigger + * + * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/device.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> + +struct usbport_trig_data { + struct led_classdev *led_cdev; + struct list_head ports; + struct notifier_block nb; + int count; /* Amount of connected matching devices */ +}; + +struct usbport_trig_port { + struct usbport_trig_data *data; + struct usb_device *hub; + int portnum; + char *port_name; + bool observed; + struct device_attribute attr; + struct list_head list; +}; + +/*************************************** + * Helpers + ***************************************/ + +/** + * usbport_trig_usb_dev_observed - Check if dev is connected to observed port + */ +static bool usbport_trig_usb_dev_observed(struct usbport_trig_data *usbport_data, + struct usb_device *usb_dev) +{ + struct usbport_trig_port *port; + + if (!usb_dev->parent) + return false; + + list_for_each_entry(port, &usbport_data->ports, list) { + if (usb_dev->parent == port->hub && + usb_dev->portnum == port->portnum) + return port->observed; + } + + return false; +} + +static int usbport_trig_usb_dev_check(struct usb_device *usb_dev, void *data) +{ + struct usbport_trig_data *usbport_data = data; + + if (usbport_trig_usb_dev_observed(usbport_data, usb_dev)) + usbport_data->count++; + + return 0; +} + +/** + * usbport_trig_update_count - Recalculate amount of connected matching devices + */ +static void usbport_trig_update_count(struct usbport_trig_data *usbport_data) +{ + struct led_classdev *led_cdev = usbport_data->led_cdev; + + usbport_data->count = 0; + usb_for_each_dev(usbport_data, usbport_trig_usb_dev_check); + led_cdev->brightness_set(led_cdev, + usbport_data->count ? LED_FULL : LED_OFF); +} + +/*************************************** + * Device attr + ***************************************/ + +static ssize_t usbport_trig_port_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usbport_trig_port *port = container_of(attr, + struct usbport_trig_port, + attr); + + return sprintf(buf, "%d\n", port->observed) + 1; +} + +static ssize_t usbport_trig_port_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct usbport_trig_port *port = container_of(attr, + struct usbport_trig_port, + attr); + + if (!strcmp(buf, "0") || !strcmp(buf, "0\n")) + port->observed = 0; + else if (!strcmp(buf, "1") || !strcmp(buf, "1\n")) + port->observed = 1; + else + return -EINVAL; + + usbport_trig_update_count(port->data); + + return size; +} + +static struct attribute *ports_attrs[] = { + NULL, +}; +static const struct attribute_group ports_group = { + .name = "ports", + .attrs = ports_attrs, +}; + +/*************************************** + * Adding & removing ports + ***************************************/ + +static int usbport_trig_add_port(struct usbport_trig_data *usbport_data, + struct usb_device *usb_dev, + const char *hub_name, int portnum) +{ + struct led_classdev *led_cdev = usbport_data->led_cdev; + struct usbport_trig_port *port; + size_t len; + int err; + + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) { + err = -ENOMEM; + goto err_out; + } + + port->data = usbport_data; + port->hub = usb_dev; + port->portnum = portnum; + + len = strlen(hub_name) + 8; + port->port_name = kzalloc(len, GFP_KERNEL); + if (!port->port_name) { + err = -ENOMEM; + goto err_free_port; + } + snprintf(port->port_name, len, "%s-port%d", hub_name, portnum); + + port->attr.attr.name = port->port_name; + port->attr.attr.mode = S_IRUSR | S_IWUSR; + port->attr.show = usbport_trig_port_show; + port->attr.store = usbport_trig_port_store; + + err = sysfs_add_file_to_group(&led_cdev->dev->kobj, &port->attr.attr, + ports_group.name); + if (err) + goto err_free_port_name; + + list_add_tail(&port->list, &usbport_data->ports); + + return 0; + +err_free_port_name: + kfree(port->port_name); +err_free_port: + kfree(port); +err_out: + return err; +} + +static int usbport_trig_add_usb_dev_ports(struct usb_device *usb_dev, + void *data) +{ + struct usbport_trig_data *usbport_data = data; + int i; + + for (i = 1; i <= usb_dev->maxchild; i++) + usbport_trig_add_port(usbport_data, usb_dev, + dev_name(&usb_dev->dev), i); + + return 0; +} + +static void usbport_trig_remove_port(struct usbport_trig_data *usbport_data, + struct usbport_trig_port *port) +{ + struct led_classdev *led_cdev = usbport_data->led_cdev; + + list_del(&port->list); + sysfs_remove_file_from_group(&led_cdev->dev->kobj, &port->attr.attr, + ports_group.name); + kfree(port->port_name); + kfree(port); +} + +static void usbport_trig_remove_usb_dev_ports(struct usbport_trig_data *usbport_data, + struct usb_device *usb_dev) +{ + struct usbport_trig_port *port, *tmp; + + list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) { + if (port->hub == usb_dev) + usbport_trig_remove_port(usbport_data, port); + } +} + +/*************************************** + * Init, exit, etc. + ***************************************/ + +static int usbport_trig_notify(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct usbport_trig_data *usbport_data = + container_of(nb, struct usbport_trig_data, nb); + struct led_classdev *led_cdev = usbport_data->led_cdev; + struct usb_device *usb_dev = data; + bool observed; + + observed = usbport_trig_usb_dev_observed(usbport_data, usb_dev); + + switch (action) { + case USB_DEVICE_ADD: + usbport_trig_add_usb_dev_ports(usb_dev, usbport_data); + if (observed && usbport_data->count++ == 0) + led_cdev->brightness_set(led_cdev, LED_FULL); + return NOTIFY_OK; + case USB_DEVICE_REMOVE: + usbport_trig_remove_usb_dev_ports(usbport_data, usb_dev); + if (observed && --usbport_data->count == 0) + led_cdev->brightness_set(led_cdev, LED_OFF); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static void usbport_trig_activate(struct led_classdev *led_cdev) +{ + struct usbport_trig_data *usbport_data; + int err; + + usbport_data = kzalloc(sizeof(*usbport_data), GFP_KERNEL); + if (!usbport_data) + return; + usbport_data->led_cdev = led_cdev; + + /* List of ports */ + INIT_LIST_HEAD(&usbport_data->ports); + err = sysfs_create_group(&led_cdev->dev->kobj, &ports_group); + if (err) + goto err_free; + usb_for_each_dev(usbport_data, usbport_trig_add_usb_dev_ports); + + /* Notifications */ + usbport_data->nb.notifier_call = usbport_trig_notify, + led_cdev->trigger_data = usbport_data; + usb_register_notify(&usbport_data->nb); + + led_cdev->activated = true; + return; + +err_free: + kfree(usbport_data); +} + +static void usbport_trig_deactivate(struct led_classdev *led_cdev) +{ + struct usbport_trig_data *usbport_data = led_cdev->trigger_data; + struct usbport_trig_port *port, *tmp; + + if (!led_cdev->activated) + return; + + list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) { + usbport_trig_remove_port(usbport_data, port); + } + + usb_unregister_notify(&usbport_data->nb); + + sysfs_remove_group(&led_cdev->dev->kobj, &ports_group); + + kfree(usbport_data); + + led_cdev->activated = false; +} + +static struct led_trigger usbport_led_trigger = { + .name = "usbport", + .activate = usbport_trig_activate, + .deactivate = usbport_trig_deactivate, +}; + +static int __init usbport_trig_init(void) +{ + return led_trigger_register(&usbport_led_trigger); +} + +static void __exit usbport_trig_exit(void) +{ + led_trigger_unregister(&usbport_led_trigger); +} + +module_init(usbport_trig_init); +module_exit(usbport_trig_exit); + +MODULE_AUTHOR("Rafał Miłecki <rafal@milecki.pl>"); +MODULE_DESCRIPTION("USB port trigger"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 0406a59f0551..3a4707746157 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1760,17 +1760,14 @@ int usb_set_configuration(struct usb_device *dev, int configuration) nintf = cp->desc.bNumInterfaces; new_interfaces = kmalloc(nintf * sizeof(*new_interfaces), GFP_NOIO); - if (!new_interfaces) { - dev_err(&dev->dev, "Out of memory\n"); + if (!new_interfaces) return -ENOMEM; - } for (; n < nintf; ++n) { new_interfaces[n] = kzalloc( sizeof(struct usb_interface), GFP_NOIO); if (!new_interfaces[n]) { - dev_err(&dev->dev, "Out of memory\n"); ret = -ENOMEM; free_interfaces: while (--n >= 0) @@ -1862,7 +1859,12 @@ free_interfaces: intf->dev.bus = &usb_bus_type; intf->dev.type = &usb_if_device_type; intf->dev.groups = usb_interface_groups; + /* + * Please refer to usb_alloc_dev() to see why we set + * dma_mask and dma_pfn_offset. + */ intf->dev.dma_mask = dev->dev.dma_mask; + intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset; INIT_WORK(&intf->reset_ws, __usb_queue_reset_device); intf->minor = -1; device_initialize(&intf->dev); diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c index 2289700c31d6..3de4f8873984 100644 --- a/drivers/usb/core/of.c +++ b/drivers/usb/core/of.c @@ -18,6 +18,7 @@ */ #include <linux/of.h> +#include <linux/usb/of.h> /** * usb_of_get_child_node - Find the device node match port number diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h index a95b0c989c21..085049d37d7a 100644 --- a/drivers/usb/core/otg_whitelist.h +++ b/drivers/usb/core/otg_whitelist.h @@ -38,7 +38,7 @@ static struct usb_device_id whitelist_table[] = { { USB_DEVICE(0x0525, 0xa4a2), }, #endif -#if defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE) +#if IS_ENABLED(CONFIG_USB_TEST) /* gadget zero, for testing */ { USB_DEVICE(0x0525, 0xa4a0), }, #endif diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index c601e25b609f..a9039696476e 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -68,10 +68,8 @@ struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags) urb = kmalloc(sizeof(struct urb) + iso_packets * sizeof(struct usb_iso_packet_descriptor), mem_flags); - if (!urb) { - printk(KERN_ERR "alloc_urb: kmalloc failed\n"); + if (!urb) return NULL; - } usb_init_urb(urb); return urb; } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 5e80697ef952..592151461017 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -440,7 +440,18 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, dev->dev.bus = &usb_bus_type; dev->dev.type = &usb_device_type; dev->dev.groups = usb_device_groups; + /* + * Fake a dma_mask/offset for the USB device: + * We cannot really use the dma-mapping API (dma_alloc_* and + * dma_map_*) for USB devices but instead need to use + * usb_alloc_coherent and pass data in 'urb's, but some subsystems + * manually look into the mask/offset pair to determine whether + * they need bounce buffers. + * Note: calling dma_set_mask() on a USB device would set the + * mask for the entire HCD, so don't do that. + */ dev->dev.dma_mask = bus->controller->dma_mask; + dev->dev.dma_pfn_offset = bus->controller->dma_pfn_offset; set_dev_node(&dev->dev, dev_to_node(bus->controller)); dev->state = USB_STATE_ATTACHED; dev->lpm_disable_count = 1; diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 4135a5ff67ca..fa9b26b91507 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -238,6 +238,77 @@ int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg) return ret; } +/** + * dwc2_wait_for_mode() - Waits for the controller mode. + * @hsotg: Programming view of the DWC_otg controller. + * @host_mode: If true, waits for host mode, otherwise device mode. + */ +static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg, + bool host_mode) +{ + ktime_t start; + ktime_t end; + unsigned int timeout = 110; + + dev_vdbg(hsotg->dev, "Waiting for %s mode\n", + host_mode ? "host" : "device"); + + start = ktime_get(); + + while (1) { + s64 ms; + + if (dwc2_is_host_mode(hsotg) == host_mode) { + dev_vdbg(hsotg->dev, "%s mode set\n", + host_mode ? "Host" : "Device"); + break; + } + + end = ktime_get(); + ms = ktime_to_ms(ktime_sub(end, start)); + + if (ms >= (s64)timeout) { + dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n", + __func__, host_mode ? "host" : "device"); + break; + } + + usleep_range(1000, 2000); + } +} + +/** + * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce + * filter is enabled. + */ +static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg) +{ + u32 gsnpsid; + u32 ghwcfg4; + + if (!dwc2_hw_is_otg(hsotg)) + return false; + + /* Check if core configuration includes the IDDIG filter. */ + ghwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4); + if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN)) + return false; + + /* + * Check if the IDDIG debounce filter is bypassed. Available + * in core version >= 3.10a. + */ + gsnpsid = dwc2_readl(hsotg->regs + GSNPSID); + if (gsnpsid >= DWC2_CORE_REV_3_10a) { + u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + + if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS) + return false; + } + + return true; +} + /* * Do core a soft reset of the core. Be careful with this because it * resets all the internal state machines of the core. @@ -246,9 +317,30 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg) { u32 greset; int count = 0; + bool wait_for_host_mode = false; dev_vdbg(hsotg->dev, "%s()\n", __func__); + /* + * If the current mode is host, either due to the force mode + * bit being set (which persists after core reset) or the + * connector id pin, a core soft reset will temporarily reset + * the mode to device. A delay from the IDDIG debounce filter + * will occur before going back to host mode. + * + * Determine whether we will go back into host mode after a + * reset and account for this delay after the reset. + */ + if (dwc2_iddig_filter_enabled(hsotg)) { + u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + u32 gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + + if (!(gotgctl & GOTGCTL_CONID_B) || + (gusbcfg & GUSBCFG_FORCEHOSTMODE)) { + wait_for_host_mode = true; + } + } + /* Core Soft Reset */ greset = dwc2_readl(hsotg->regs + GRSTCTL); greset |= GRSTCTL_CSFTRST; @@ -277,6 +369,9 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg) } } while (!(greset & GRSTCTL_AHBIDLE)); + if (wait_for_host_mode) + dwc2_wait_for_mode(hsotg, true); + return 0; } @@ -300,9 +395,9 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg) * Checks are done in this function to determine whether doing a force * would be valid or not. * - * If a force is done, it requires a 25ms delay to take effect. - * - * Returns true if the mode was forced. + * If a force is done, it requires a IDDIG debounce filter delay if + * the filter is configured and enabled. We poll the current mode of + * the controller to account for this delay. */ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) { @@ -337,12 +432,18 @@ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) gusbcfg |= set; dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); - msleep(25); + dwc2_wait_for_mode(hsotg, host); return true; } -/* - * Clears the force mode bits. +/** + * dwc2_clear_force_mode() - Clears the force mode bits. + * + * After clearing the bits, wait up to 100 ms to account for any + * potential IDDIG filter delay. We can't know if we expect this delay + * or not because the value of the connector ID status is affected by + * the force mode. We only need to call this once during probe if + * dr_mode == OTG. */ static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) { @@ -353,11 +454,8 @@ static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) gusbcfg &= ~GUSBCFG_FORCEDEVMODE; dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); - /* - * NOTE: This long sleep is _very_ important, otherwise the core will - * not stay in host mode after a connector ID change! - */ - msleep(25); + if (dwc2_iddig_filter_enabled(hsotg)) + usleep_range(100000, 110000); } /* @@ -380,12 +478,6 @@ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg) __func__, hsotg->dr_mode); break; } - - /* - * NOTE: This is required for some rockchip soc based - * platforms. - */ - msleep(50); } /* diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index d64551243789..aad4107ef927 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -259,13 +259,6 @@ enum dwc2_lx_state { DWC2_L3, /* Off state */ }; -/* - * Gadget periodic tx fifo sizes as used by legacy driver - * EP0 is not included - */ -#define DWC2_G_P_LEGACY_TX_FIFO_SIZE {256, 256, 256, 256, 768, 768, 768, \ - 768, 0, 0, 0, 0, 0, 0, 0} - /* Gadget ep0 states */ enum dwc2_ep0_state { DWC2_EP0_SETUP, @@ -890,6 +883,7 @@ struct dwc2_hsotg { #define DWC2_CORE_REV_2_92a 0x4f54292a #define DWC2_CORE_REV_2_94a 0x4f54294a #define DWC2_CORE_REV_3_00a 0x4f54300a +#define DWC2_CORE_REV_3_10a 0x4f54310a #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) union dwc2_hcd_internal_flags { diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index af46adfae41c..4cd6403a7566 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -186,9 +186,10 @@ static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg, */ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg) { - unsigned int ep; + unsigned int fifo; unsigned int addr; int timeout; + u32 dptxfsizn; u32 val; /* Reset fifo map if not correctly cleared during previous session */ @@ -216,16 +217,16 @@ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg) * them to endpoints dynamically according to maxpacket size value of * given endpoint. */ - for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) { - if (!hsotg->g_tx_fifo_sz[ep]) - continue; - val = addr; - val |= hsotg->g_tx_fifo_sz[ep] << FIFOSIZE_DEPTH_SHIFT; - WARN_ONCE(addr + hsotg->g_tx_fifo_sz[ep] > hsotg->fifo_mem, - "insufficient fifo memory"); - addr += hsotg->g_tx_fifo_sz[ep]; + for (fifo = 1; fifo < MAX_EPS_CHANNELS; fifo++) { + dptxfsizn = dwc2_readl(hsotg->regs + DPTXFSIZN(fifo)); + + val = (dptxfsizn & FIFOSIZE_DEPTH_MASK) | addr; + addr += dptxfsizn >> FIFOSIZE_DEPTH_SHIFT; + + if (addr > hsotg->fifo_mem) + break; - dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep)); + dwc2_writel(val, hsotg->regs + DPTXFSIZN(fifo)); } /* @@ -388,7 +389,8 @@ static int dwc2_hsotg_write_fifo(struct dwc2_hsotg *hsotg, return -ENOSPC; } } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { - can_write = dwc2_readl(hsotg->regs + DTXFSTS(hs_ep->index)); + can_write = dwc2_readl(hsotg->regs + + DTXFSTS(hs_ep->fifo_index)); can_write &= 0xffff; can_write *= 4; @@ -2432,7 +2434,7 @@ static void kill_all_requests(struct dwc2_hsotg *hsotg, if (!hsotg->dedicated_fifos) return; - size = (dwc2_readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4; + size = (dwc2_readl(hsotg->regs + DTXFSTS(ep->fifo_index)) & 0xffff) * 4; if (size < ep->fifo_size) dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index); } @@ -3041,22 +3043,11 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, break; } - /* If fifo is already allocated for this ep */ - if (hs_ep->fifo_index) { - size = hs_ep->ep.maxpacket * hs_ep->mc; - /* If bigger fifo is required deallocate current one */ - if (size > hs_ep->fifo_size) { - hsotg->fifo_map &= ~(1 << hs_ep->fifo_index); - hs_ep->fifo_index = 0; - hs_ep->fifo_size = 0; - } - } - /* * if the hardware has dedicated fifos, we must give each IN EP * a unique tx-fifo even if it is non-periodic. */ - if (dir_in && hsotg->dedicated_fifos && !hs_ep->fifo_index) { + if (dir_in && hsotg->dedicated_fifos) { u32 fifo_index = 0; u32 fifo_size = UINT_MAX; size = hs_ep->ep.maxpacket*hs_ep->mc; @@ -3129,10 +3120,6 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) spin_lock_irqsave(&hsotg->lock, flags); - hsotg->fifo_map &= ~(1<<hs_ep->fifo_index); - hs_ep->fifo_index = 0; - hs_ep->fifo_size = 0; - ctrl = dwc2_readl(hsotg->regs + epctrl_reg); ctrl &= ~DXEPCTL_EPENA; ctrl &= ~DXEPCTL_USBACTEP; @@ -3147,6 +3134,10 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) /* terminate all requests with shutdown */ kill_all_requests(hsotg, hs_ep, -ESHUTDOWN); + hsotg->fifo_map &= ~(1 << hs_ep->fifo_index); + hs_ep->fifo_index = 0; + hs_ep->fifo_size = 0; + spin_unlock_irqrestore(&hsotg->lock, flags); return 0; } @@ -3475,8 +3466,11 @@ static int dwc2_hsotg_udc_start(struct usb_gadget *gadget, otg_set_peripheral(hsotg->uphy->otg, &hsotg->gadget); spin_lock_irqsave(&hsotg->lock, flags); - dwc2_hsotg_init(hsotg); - dwc2_hsotg_core_init_disconnected(hsotg, false); + if (dwc2_hw_is_device(hsotg)) { + dwc2_hsotg_init(hsotg); + dwc2_hsotg_core_init_disconnected(hsotg, false); + } + hsotg->enabled = 0; spin_unlock_irqrestore(&hsotg->lock, flags); @@ -3813,36 +3807,10 @@ static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg) static void dwc2_hsotg_of_probe(struct dwc2_hsotg *hsotg) { struct device_node *np = hsotg->dev->of_node; - u32 len = 0; - u32 i = 0; /* Enable dma if requested in device tree */ hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma"); - /* - * Register TX periodic fifo size per endpoint. - * EP0 is excluded since it has no fifo configuration. - */ - if (!of_find_property(np, "g-tx-fifo-size", &len)) - goto rx_fifo; - - len /= sizeof(u32); - - /* Read tx fifo sizes other than ep0 */ - if (of_property_read_u32_array(np, "g-tx-fifo-size", - &hsotg->g_tx_fifo_sz[1], len)) - goto rx_fifo; - - /* Add ep0 */ - len++; - - /* Make remaining TX fifos unavailable */ - if (len < MAX_EPS_CHANNELS) { - for (i = len; i < MAX_EPS_CHANNELS; i++) - hsotg->g_tx_fifo_sz[i] = 0; - } - -rx_fifo: /* Register RX fifo size */ of_property_read_u32(np, "g-rx-fifo-size", &hsotg->g_rx_fifo_sz); @@ -3864,13 +3832,10 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) struct device *dev = hsotg->dev; int epnum; int ret; - int i; - u32 p_tx_fifo[] = DWC2_G_P_LEGACY_TX_FIFO_SIZE; /* Initialize to legacy fifo configuration values */ hsotg->g_rx_fifo_sz = 2048; hsotg->g_np_g_tx_fifo_sz = 1024; - memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo)); /* Device tree specific probe */ dwc2_hsotg_of_probe(hsotg); @@ -3888,9 +3853,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n", hsotg->g_np_g_tx_fifo_sz); dev_dbg(dev, "RXFIFO size: %d\n", hsotg->g_rx_fifo_sz); - for (i = 0; i < MAX_EPS_CHANNELS; i++) - dev_dbg(dev, "Periodic TXFIFO%2d size: %d\n", i, - hsotg->g_tx_fifo_sz[i]); hsotg->gadget.max_speed = USB_SPEED_HIGH; hsotg->gadget.ops = &dwc2_hsotg_gadget_ops; @@ -3908,17 +3870,13 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) hsotg->ctrl_buff = devm_kzalloc(hsotg->dev, DWC2_CTRL_BUFF_SIZE, GFP_KERNEL); - if (!hsotg->ctrl_buff) { - dev_err(dev, "failed to allocate ctrl request buff\n"); + if (!hsotg->ctrl_buff) return -ENOMEM; - } hsotg->ep0_buff = devm_kzalloc(hsotg->dev, DWC2_CTRL_BUFF_SIZE, GFP_KERNEL); - if (!hsotg->ep0_buff) { - dev_err(dev, "failed to allocate ctrl reply buff\n"); + if (!hsotg->ep0_buff) return -ENOMEM; - } ret = devm_request_irq(hsotg->dev, irq, dwc2_hsotg_irq, IRQF_SHARED, dev_name(hsotg->dev), hsotg); diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 2df3d04d26f5..df5a06578005 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5040,7 +5040,7 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq) /* Create new workqueue and init work */ retval = -ENOMEM; - hsotg->wq_otg = create_singlethread_workqueue("dwc2"); + hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0); if (!hsotg->wq_otg) { dev_err(hsotg->dev, "Failed to create workqueue\n"); goto error2; diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index efc3bcde2822..91058441e62a 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -48,6 +48,7 @@ #define GOTGCTL_ASESVLD (1 << 18) #define GOTGCTL_DBNC_SHORT (1 << 17) #define GOTGCTL_CONID_B (1 << 16) +#define GOTGCTL_DBNCE_FLTR_BYPASS (1 << 15) #define GOTGCTL_DEVHNPEN (1 << 11) #define GOTGCTL_HSTSETHNPEN (1 << 10) #define GOTGCTL_HNPREQ (1 << 9) diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index a64ce1c94d6d..b97cde76914d 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -1,7 +1,7 @@ config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" depends on (USB || USB_GADGET) && HAS_DMA - select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD + select USB_XHCI_PLATFORM if USB_XHCI_HCD help Say Y or M here if your system has a Dual Role SuperSpeed USB controller based on the DesignWare USB3 IP Core. diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 35d092456bec..7287a763cd0c 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -49,6 +49,57 @@ #define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */ +/** + * dwc3_get_dr_mode - Validates and sets dr_mode + * @dwc: pointer to our context structure + */ +static int dwc3_get_dr_mode(struct dwc3 *dwc) +{ + enum usb_dr_mode mode; + struct device *dev = dwc->dev; + unsigned int hw_mode; + + if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) + dwc->dr_mode = USB_DR_MODE_OTG; + + mode = dwc->dr_mode; + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + + switch (hw_mode) { + case DWC3_GHWPARAMS0_MODE_GADGET: + if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) { + dev_err(dev, + "Controller does not support host mode.\n"); + return -EINVAL; + } + mode = USB_DR_MODE_PERIPHERAL; + break; + case DWC3_GHWPARAMS0_MODE_HOST: + if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) { + dev_err(dev, + "Controller does not support device mode.\n"); + return -EINVAL; + } + mode = USB_DR_MODE_HOST; + break; + default: + if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) + mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) + mode = USB_DR_MODE_PERIPHERAL; + } + + if (mode != dwc->dr_mode) { + dev_warn(dev, + "Configuration mismatch. dr_mode forced to %s\n", + mode == USB_DR_MODE_HOST ? "host" : "gadget"); + + dwc->dr_mode = mode; + } + + return 0; +} + void dwc3_set_mode(struct dwc3 *dwc, u32 mode) { u32 reg; @@ -448,6 +499,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_u3_susphy_quirk) reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + if (dwc->dis_del_phy_power_chg_quirk) + reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); @@ -485,6 +539,23 @@ static int dwc3_phy_setup(struct dwc3 *dwc) break; } + switch (dwc->hsphy_mode) { + case USBPHY_INTERFACE_MODE_UTMI: + reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | + DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); + reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) | + DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT); + break; + case USBPHY_INTERFACE_MODE_UTMIW: + reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | + DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); + reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) | + DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT); + break; + default: + break; + } + /* * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to * '0' during coreConsultant configuration. So default value will @@ -500,6 +571,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_enblslpm_quirk) reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + if (dwc->dis_u2_freeclk_exists_quirk) + reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); return 0; @@ -666,6 +740,32 @@ static int dwc3_core_init(struct dwc3 *dwc) goto err4; } + switch (dwc->dr_mode) { + case USB_DR_MODE_PERIPHERAL: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); + break; + case USB_DR_MODE_HOST: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); + break; + case USB_DR_MODE_OTG: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); + break; + default: + dev_warn(dwc->dev, "Unsupported mode %d\n", dwc->dr_mode); + break; + } + + /* + * ENDXFER polling is available on version 3.10a and later of + * the DWC_usb3 controller. It is NOT available in the + * DWC_usb31 controller. + */ + if (!dwc3_is_usb31(dwc) && dwc->revision >= DWC3_REVISION_310A) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL2); + reg |= DWC3_GUCTL2_RST_ACTBITLATER; + dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); + } + return 0; err4: @@ -763,7 +863,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) { if (ret != -EPROBE_DEFER) @@ -772,7 +871,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) } break; case USB_DR_MODE_HOST: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); ret = dwc3_host_init(dwc); if (ret) { if (ret != -EPROBE_DEFER) @@ -781,7 +879,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) } break; case USB_DR_MODE_OTG: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); ret = dwc3_host_init(dwc); if (ret) { if (ret != -EPROBE_DEFER) @@ -888,6 +985,7 @@ static int dwc3_probe(struct platform_device *pdev) dwc->maximum_speed = usb_get_maximum_speed(dev); dwc->dr_mode = usb_get_dr_mode(dev); + dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node); dwc->has_lpm_erratum = device_property_read_bool(dev, "snps,has-lpm-erratum"); @@ -924,6 +1022,10 @@ static int dwc3_probe(struct platform_device *pdev) "snps,dis_enblslpm_quirk"); dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev, "snps,dis_rxdet_inp3_quirk"); + dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev, + "snps,dis-u2-freeclk-exists-quirk"); + dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev, + "snps,dis-del-phy-power-chg-quirk"); dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, "snps,tx_de_emphasis_quirk"); @@ -972,17 +1074,9 @@ static int dwc3_probe(struct platform_device *pdev) goto err2; } - if (IS_ENABLED(CONFIG_USB_DWC3_HOST) && - (dwc->dr_mode == USB_DR_MODE_OTG || - dwc->dr_mode == USB_DR_MODE_UNKNOWN)) - dwc->dr_mode = USB_DR_MODE_HOST; - else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET) && - (dwc->dr_mode == USB_DR_MODE_OTG || - dwc->dr_mode == USB_DR_MODE_UNKNOWN)) - dwc->dr_mode = USB_DR_MODE_PERIPHERAL; - - if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) - dwc->dr_mode = USB_DR_MODE_OTG; + ret = dwc3_get_dr_mode(dwc); + if (ret) + goto err3; ret = dwc3_alloc_scratch_buffers(dwc); if (ret) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 45d6de5107c7..6b60e42626a2 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -109,6 +109,7 @@ #define DWC3_GPRTBIMAP_HS1 0xc184 #define DWC3_GPRTBIMAP_FS0 0xc188 #define DWC3_GPRTBIMAP_FS1 0xc18c +#define DWC3_GUCTL2 0xc19c #define DWC3_VER_NUMBER 0xc1a0 #define DWC3_VER_TYPE 0xc1a4 @@ -199,9 +200,18 @@ /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) +#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30) #define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) #define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4) #define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8) +#define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3) +#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1) +#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10) +#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf) +#define USBTRDTIM_UTMI_8_BIT 9 +#define USBTRDTIM_UTMI_16_BIT 5 +#define UTMI_PHYIF_16_BIT 1 +#define UTMI_PHYIF_8_BIT 0 /* Global USB2 PHY Vendor Control Register */ #define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25) @@ -235,7 +245,10 @@ #define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff) /* Global HWPARAMS0 Register */ -#define DWC3_GHWPARAMS0_USB3_MODE(n) ((n) & 0x3) +#define DWC3_GHWPARAMS0_MODE(n) ((n) & 0x3) +#define DWC3_GHWPARAMS0_MODE_GADGET 0 +#define DWC3_GHWPARAMS0_MODE_HOST 1 +#define DWC3_GHWPARAMS0_MODE_DRD 2 #define DWC3_GHWPARAMS0_MBUS_TYPE(n) (((n) >> 3) & 0x7) #define DWC3_GHWPARAMS0_SBUS_TYPE(n) (((n) >> 6) & 0x3) #define DWC3_GHWPARAMS0_MDWIDTH(n) (((n) >> 8) & 0xff) @@ -279,6 +292,9 @@ #define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7) #define DWC3_GFLADJ_30MHZ_MASK 0x3f +/* Global User Control Register 2 */ +#define DWC3_GUCTL2_RST_ACTBITLATER (1 << 14) + /* Device Configuration Register */ #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) @@ -685,6 +701,8 @@ struct dwc3_hwparams { * @request: struct usb_request to be transferred * @list: a list_head used for request queueing * @dep: struct dwc3_ep owning this request + * @sg: pointer to first incomplete sg + * @num_pending_sgs: counter to pending sgs * @first_trb_index: index to first trb used by this request * @epnum: endpoint number to which this request refers * @trb: pointer to struct dwc3_trb @@ -697,7 +715,9 @@ struct dwc3_request { struct usb_request request; struct list_head list; struct dwc3_ep *dep; + struct scatterlist *sg; + unsigned num_pending_sgs; u8 first_trb_index; u8 epnum; struct dwc3_trb *trb; @@ -743,6 +763,9 @@ struct dwc3_scratchpad_array { * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents * @dr_mode: requested mode of operation + * @hsphy_mode: UTMI phy mode, one of following: + * - USBPHY_INTERFACE_MODE_UTMI + * - USBPHY_INTERFACE_MODE_UTMIW * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY @@ -799,6 +822,11 @@ struct dwc3_scratchpad_array { * @dis_u2_susphy_quirk: set if we disable usb2 suspend phy * @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG, * disabling the suspend signal to the PHY. + * @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists + * in GUSB2PHYCFG, specify that USB2 PHY doesn't + * provide a free-running PHY clock. + * @dis_del_phy_power_chg_quirk: set if we disable delay phy power + * change quirk. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis @@ -845,6 +873,7 @@ struct dwc3 { size_t regs_size; enum usb_dr_mode dr_mode; + enum usb_phy_interface hsphy_mode; u32 fladj; u32 irq_gadget; @@ -880,6 +909,8 @@ struct dwc3 { #define DWC3_REVISION_260A 0x5533260a #define DWC3_REVISION_270A 0x5533270a #define DWC3_REVISION_280A 0x5533280a +#define DWC3_REVISION_300A 0x5533300a +#define DWC3_REVISION_310A 0x5533310a /* * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really @@ -942,6 +973,8 @@ struct dwc3 { unsigned dis_u2_susphy_quirk:1; unsigned dis_enblslpm_quirk:1; unsigned dis_rxdet_inp3_quirk:1; + unsigned dis_u2_freeclk_exists_quirk:1; + unsigned dis_del_phy_power_chg_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index e56d59b19a0e..fe414e7a9c78 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -36,36 +36,25 @@ struct dwc3_of_simple { int num_clocks; }; -static int dwc3_of_simple_probe(struct platform_device *pdev) +static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count) { - struct dwc3_of_simple *simple; - struct device *dev = &pdev->dev; + struct device *dev = simple->dev; struct device_node *np = dev->of_node; - - unsigned int count; - int ret; int i; - simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL); - if (!simple) - return -ENOMEM; + simple->num_clocks = count; - count = of_clk_get_parent_count(np); if (!count) - return -ENOENT; - - simple->num_clocks = count; + return 0; simple->clks = devm_kcalloc(dev, simple->num_clocks, sizeof(struct clk *), GFP_KERNEL); if (!simple->clks) return -ENOMEM; - platform_set_drvdata(pdev, simple); - simple->dev = dev; - for (i = 0; i < simple->num_clocks; i++) { struct clk *clk; + int ret; clk = of_clk_get(np, i); if (IS_ERR(clk)) { @@ -88,6 +77,29 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) simple->clks[i] = clk; } + return 0; +} + +static int dwc3_of_simple_probe(struct platform_device *pdev) +{ + struct dwc3_of_simple *simple; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + + int ret; + int i; + + simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL); + if (!simple) + return -ENOMEM; + + platform_set_drvdata(pdev, simple); + simple->dev = dev; + + ret = dwc3_of_simple_clk_init(simple, of_clk_get_parent_count(np)); + if (ret) + return ret; + ret = of_platform_populate(np, NULL, NULL, dev); if (ret) { for (i = 0; i < simple->num_clocks; i++) { @@ -112,7 +124,7 @@ static int dwc3_of_simple_remove(struct platform_device *pdev) int i; for (i = 0; i < simple->num_clocks; i++) { - clk_unprepare(simple->clks[i]); + clk_disable_unprepare(simple->clks[i]); clk_put(simple->clks[i]); } @@ -162,7 +174,9 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = { static const struct of_device_id of_dwc3_simple_match[] = { { .compatible = "qcom,dwc3" }, + { .compatible = "rockchip,rk3399-dwc3" }, { .compatible = "xlnx,zynqmp-dwc3" }, + { .compatible = "cavium,octeon-7130-usb-uctl" }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, of_dwc3_simple_match); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 122e64df2f4d..07cc8929f271 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -174,15 +174,8 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status) { struct dwc3 *dwc = dep->dwc; - int i; - if (req->started) { - i = 0; - do { - dwc3_ep_inc_deq(dep); - } while(++i < req->request.num_mapped_sgs); - req->started = false; - } + req->started = false; list_del(&req->list); req->trb = NULL; @@ -348,7 +341,8 @@ static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep) * IN transfers due to a mishandled error condition. Synopsys * STAR 9000614252. */ - if (dep->direction && (dwc->revision >= DWC3_REVISION_260A)) + if (dep->direction && (dwc->revision >= DWC3_REVISION_260A) && + (dwc->gadget.speed >= USB_SPEED_SUPER)) cmd |= DWC3_DEPCMD_CLEARPENDIN; memset(¶ms, 0, sizeof(params)); @@ -490,7 +484,8 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, params.param0 |= DWC3_DEPCFG_ACTION_INIT; } - params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN; + if (usb_endpoint_xfer_control(desc)) + params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN; if (dep->number <= 1 || usb_endpoint_xfer_isoc(desc)) params.param1 |= DWC3_DEPCFG_XFER_NOT_READY_EN; @@ -764,6 +759,8 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep, kfree(req); } +static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep); + /** * dwc3_prepare_one_trb - setup one TRB from one request * @dep: endpoint for which this request is prepared @@ -771,15 +768,13 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep, */ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_request *req, dma_addr_t dma, - unsigned length, unsigned last, unsigned chain, unsigned node) + unsigned length, unsigned chain, unsigned node) { struct dwc3_trb *trb; - dwc3_trace(trace_dwc3_gadget, "%s: req %p dma %08llx length %d%s%s", + dwc3_trace(trace_dwc3_gadget, "%s: req %p dma %08llx length %d%s", dep->name, req, (unsigned long long) dma, - length, last ? " last" : "", - chain ? " chain" : ""); - + length, chain ? " chain" : ""); trb = &dep->trb_pool[dep->trb_enqueue]; @@ -826,12 +821,10 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, /* always enable Continue on Short Packet */ trb->ctrl |= DWC3_TRB_CTRL_CSP; - if (!req->request.no_interrupt && !chain) + if ((!req->request.no_interrupt && !chain) || + (dwc3_calc_trbs_left(dep) == 0)) trb->ctrl |= DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_ISP_IMI; - if (last && !usb_endpoint_xfer_isoc(dep->endpoint.desc)) - trb->ctrl |= DWC3_TRB_CTRL_LST; - if (chain) trb->ctrl |= DWC3_TRB_CTRL_CHN; @@ -856,12 +849,12 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, */ static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index) { - if (!index) - index = DWC3_TRB_NUM - 2; - else - index = dep->trb_enqueue - 1; + u8 tmp = index; - return &dep->trb_pool[index]; + if (!tmp) + tmp = DWC3_TRB_NUM - 1; + + return &dep->trb_pool[tmp - 1]; } static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) @@ -894,65 +887,42 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) } static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, - struct dwc3_request *req, unsigned int trbs_left, - unsigned int more_coming) + struct dwc3_request *req) { - struct usb_request *request = &req->request; - struct scatterlist *sg = request->sg; + struct scatterlist *sg = req->sg; struct scatterlist *s; - unsigned int last = false; unsigned int length; dma_addr_t dma; int i; - for_each_sg(sg, s, request->num_mapped_sgs, i) { + for_each_sg(sg, s, req->num_pending_sgs, i) { unsigned chain = true; length = sg_dma_len(s); dma = sg_dma_address(s); - if (sg_is_last(s)) { - if (usb_endpoint_xfer_int(dep->endpoint.desc) || - !more_coming) - last = true; - - chain = false; - } - - if (!trbs_left--) - last = true; - - if (last) + if (sg_is_last(s)) chain = false; dwc3_prepare_one_trb(dep, req, dma, length, - last, chain, i); + chain, i); - if (last) + if (!dwc3_calc_trbs_left(dep)) break; } } static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, - struct dwc3_request *req, unsigned int trbs_left, - unsigned int more_coming) + struct dwc3_request *req) { - unsigned int last = false; unsigned int length; dma_addr_t dma; dma = req->request.dma; length = req->request.length; - if (!trbs_left) - last = true; - - /* Is this the last request? */ - if (usb_endpoint_xfer_int(dep->endpoint.desc) || !more_coming) - last = true; - dwc3_prepare_one_trb(dep, req, dma, length, - last, false, 0); + false, 0); } /* @@ -966,26 +936,19 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, static void dwc3_prepare_trbs(struct dwc3_ep *dep) { struct dwc3_request *req, *n; - unsigned int more_coming; - u32 trbs_left; BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM); - trbs_left = dwc3_calc_trbs_left(dep); - if (!trbs_left) + if (!dwc3_calc_trbs_left(dep)) return; - more_coming = dep->allocated_requests - dep->queued_requests; - list_for_each_entry_safe(req, n, &dep->pending_list, list) { - if (req->request.num_mapped_sgs > 0) - dwc3_prepare_one_trb_sg(dep, req, trbs_left--, - more_coming); + if (req->num_pending_sgs > 0) + dwc3_prepare_one_trb_sg(dep, req); else - dwc3_prepare_one_trb_linear(dep, req, trbs_left--, - more_coming); + dwc3_prepare_one_trb_linear(dep, req); - if (!trbs_left) + if (!dwc3_calc_trbs_left(dep)) return; } } @@ -1101,93 +1064,29 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) trace_dwc3_ep_queue(req); - /* - * We only add to our list of requests now and - * start consuming the list once we get XferNotReady - * IRQ. - * - * That way, we avoid doing anything that we don't need - * to do now and defer it until the point we receive a - * particular token from the Host side. - * - * This will also avoid Host cancelling URBs due to too - * many NAKs. - */ ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->direction); if (ret) return ret; - list_add_tail(&req->list, &dep->pending_list); - - /* - * If there are no pending requests and the endpoint isn't already - * busy, we will just start the request straight away. - * - * This will save one IRQ (XFER_NOT_READY) and possibly make it a - * little bit faster. - */ - if (!usb_endpoint_xfer_isoc(dep->endpoint.desc) && - !usb_endpoint_xfer_int(dep->endpoint.desc)) { - ret = __dwc3_gadget_kick_transfer(dep, 0); - goto out; - } - - /* - * There are a few special cases: - * - * 1. XferNotReady with empty list of requests. We need to kick the - * transfer here in that situation, otherwise we will be NAKing - * forever. If we get XferNotReady before gadget driver has a - * chance to queue a request, we will ACK the IRQ but won't be - * able to receive the data until the next request is queued. - * The following code is handling exactly that. - * - */ - if (dep->flags & DWC3_EP_PENDING_REQUEST) { - /* - * If xfernotready is already elapsed and it is a case - * of isoc transfer, then issue END TRANSFER, so that - * you can receive xfernotready again and can have - * notion of current microframe. - */ - if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { - if (list_empty(&dep->started_list)) { - dwc3_stop_active_transfer(dwc, dep->number, true); - dep->flags = DWC3_EP_ENABLED; - } - return 0; - } - - ret = __dwc3_gadget_kick_transfer(dep, 0); - if (!ret) - dep->flags &= ~DWC3_EP_PENDING_REQUEST; + req->sg = req->request.sg; + req->num_pending_sgs = req->request.num_mapped_sgs; - goto out; - } + list_add_tail(&req->list, &dep->pending_list); - /* - * 2. XferInProgress on Isoc EP with an active transfer. We need to - * kick the transfer here after queuing a request, otherwise the - * core may not see the modified TRB(s). - */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && - (dep->flags & DWC3_EP_BUSY) && - !(dep->flags & DWC3_EP_MISSED_ISOC)) { - WARN_ON_ONCE(!dep->resource_index); - ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index); - goto out; + dep->flags & DWC3_EP_PENDING_REQUEST) { + if (list_empty(&dep->started_list)) { + dwc3_stop_active_transfer(dwc, dep->number, true); + dep->flags = DWC3_EP_ENABLED; + } + return 0; } - /* - * 4. Stream Capable Bulk Endpoints. We need to start the transfer - * right away, otherwise host will not know we have streams to be - * handled. - */ - if (dep->stream_capable) - ret = __dwc3_gadget_kick_transfer(dep, 0); + if (!dwc3_calc_trbs_left(dep)) + return 0; -out: + ret = __dwc3_gadget_kick_transfer(dep, 0); if (ret && ret != -EBUSY) dwc3_trace(trace_dwc3_gadget, "%s: failed to kick transfers", @@ -1963,6 +1862,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, unsigned int trb_status; dep->queued_requests--; + dwc3_ep_inc_deq(dep); trace_dwc3_complete_trb(dep, trb); /* @@ -1982,6 +1882,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, return 1; count = trb->size & DWC3_TRB_SIZE_MASK; + req->request.actual += count; if (dep->direction) { if (count) { @@ -2021,48 +1922,51 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, if (s_pkt && !chain) return 1; - if ((event->status & DEPEVT_STATUS_LST) && - (trb->ctrl & (DWC3_TRB_CTRL_LST | - DWC3_TRB_CTRL_HWO))) - return 1; + if ((event->status & DEPEVT_STATUS_IOC) && (trb->ctrl & DWC3_TRB_CTRL_IOC)) return 1; + return 0; } static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, const struct dwc3_event_depevt *event, int status) { - struct dwc3_request *req; + struct dwc3_request *req, *n; struct dwc3_trb *trb; - unsigned int slot; - unsigned int i; - int count = 0; + bool ioc = false; int ret; - do { + list_for_each_entry_safe(req, n, &dep->started_list, list) { + unsigned length; + unsigned actual; int chain; - req = next_request(&dep->started_list); - if (WARN_ON_ONCE(!req)) - return 1; - - chain = req->request.num_mapped_sgs > 0; - i = 0; - do { - slot = req->first_trb_index + i; - if (slot == DWC3_TRB_NUM - 1) - slot++; - slot %= DWC3_TRB_NUM; - trb = &dep->trb_pool[slot]; - count += trb->size & DWC3_TRB_SIZE_MASK; + length = req->request.length; + chain = req->num_pending_sgs > 0; + if (chain) { + struct scatterlist *sg = req->sg; + struct scatterlist *s; + unsigned int pending = req->num_pending_sgs; + unsigned int i; + for_each_sg(sg, s, pending, i) { + trb = &dep->trb_pool[dep->trb_dequeue]; + + req->sg = sg_next(s); + req->num_pending_sgs--; + + ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, + event, status, chain); + if (ret) + break; + } + } else { + trb = &dep->trb_pool[dep->trb_dequeue]; ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status, chain); - if (ret) - break; - } while (++i < req->request.num_mapped_sgs); + } /* * We assume here we will always receive the entire data block @@ -2071,12 +1975,21 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, * should receive and we simply bounce the request back to the * gadget driver for further processing. */ - req->request.actual += req->request.length - count; + actual = length - req->request.actual; + req->request.actual = actual; + + if (ret && chain && (actual < length) && req->num_pending_sgs) + return __dwc3_gadget_kick_transfer(dep, 0); + dwc3_gadget_giveback(dep, req, status); - if (ret) + if (ret) { + if ((event->status & DEPEVT_STATUS_IOC) && + (trb->ctrl & DWC3_TRB_CTRL_IOC)) + ioc = true; break; - } while (1); + } + } /* * Our endpoint might get disabled by another thread during @@ -2103,10 +2016,9 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, return 1; } - if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) - if ((event->status & DEPEVT_STATUS_IOC) && - (trb->ctrl & DWC3_TRB_CTRL_IOC)) - return 0; + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && ioc) + return 0; + return 1; } @@ -2322,6 +2234,18 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) * * - Issue EndTransfer WITH CMDIOC bit set * - Wait 100us + * + * As of IP version 3.10a of the DWC_usb3 IP, the controller + * supports a mode to work around the above limitation. The + * software can poll the CMDACT bit in the DEPCMD register + * after issuing a EndTransfer command. This mode is enabled + * by writing GUCTL2[14]. This polling is already done in the + * dwc3_send_gadget_ep_cmd() function so if the mode is + * enabled, the EndTransfer command will have completed upon + * returning from this function and we don't need to delay for + * 100us. + * + * This mode is NOT available on the DWC_usb31 IP. */ cmd = DWC3_DEPCMD_ENDTRANSFER; @@ -2333,7 +2257,9 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) WARN_ON_ONCE(ret); dep->resource_index = 0; dep->flags &= ~DWC3_EP_BUSY; - udelay(100); + + if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A) + udelay(100); } static void dwc3_stop_active_transfers(struct dwc3 *dwc) diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c index ec004c6d76f2..bd86f84f3790 100644 --- a/drivers/usb/dwc3/ulpi.c +++ b/drivers/usb/dwc3/ulpi.c @@ -35,9 +35,9 @@ static int dwc3_ulpi_busyloop(struct dwc3 *dwc) return -ETIMEDOUT; } -static int dwc3_ulpi_read(struct ulpi_ops *ops, u8 addr) +static int dwc3_ulpi_read(struct device *dev, u8 addr) { - struct dwc3 *dwc = dev_get_drvdata(ops->dev); + struct dwc3 *dwc = dev_get_drvdata(dev); u32 reg; int ret; @@ -53,9 +53,9 @@ static int dwc3_ulpi_read(struct ulpi_ops *ops, u8 addr) return DWC3_GUSB2PHYACC_DATA(reg); } -static int dwc3_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val) +static int dwc3_ulpi_write(struct device *dev, u8 addr, u8 val) { - struct dwc3 *dwc = dev_get_drvdata(ops->dev); + struct dwc3 *dwc = dev_get_drvdata(dev); u32 reg; reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr); @@ -65,7 +65,7 @@ static int dwc3_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val) return dwc3_ulpi_busyloop(dwc); } -static struct ulpi_ops dwc3_ulpi_ops = { +static const struct ulpi_ops dwc3_ulpi_ops = { .read = dwc3_ulpi_read, .write = dwc3_ulpi_write, }; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 3c3f31ceece7..8ad203296079 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -209,25 +209,6 @@ config USB_F_PRINTER config USB_F_TCM tristate -choice - tristate "USB Gadget Drivers" - default USB_ETH - help - A Linux "Gadget Driver" talks to the USB Peripheral Controller - driver through the abstract "gadget" API. Some other operating - systems call these "client" drivers, of which "class drivers" - are a subset (implementing a USB device class specification). - A gadget driver implements one or more USB functions using - the peripheral hardware. - - Gadget drivers are hardware-neutral, or "platform independent", - except that they sometimes must understand quirks or limitations - of the particular controllers they work with. For example, when - a controller doesn't support alternate configurations or provide - enough of the right types of endpoints, the gadget driver might - not be able work with that controller, or might need to implement - a less common variant of a device class protocol. - # this first set of drivers all depend on bulk-capable hardware. config USB_CONFIGFS @@ -439,6 +420,7 @@ config USB_CONFIGFS_F_HID config USB_CONFIGFS_F_UVC bool "USB Webcam function" depends on USB_CONFIGFS + depends on VIDEO_V4L2 depends on VIDEO_DEV select VIDEOBUF2_VMALLOC select USB_F_UVC @@ -475,6 +457,25 @@ config USB_CONFIGFS_F_TCM Both protocols can work on USB2.0 and USB3.0. UAS utilizes the USB 3.0 feature called streams support. +choice + tristate "USB Gadget Drivers" + default USB_ETH + help + A Linux "Gadget Driver" talks to the USB Peripheral Controller + driver through the abstract "gadget" API. Some other operating + systems call these "client" drivers, of which "class drivers" + are a subset (implementing a USB device class specification). + A gadget driver implements one or more USB functions using + the peripheral hardware. + + Gadget drivers are hardware-neutral, or "platform independent", + except that they sometimes must understand quirks or limitations + of the particular controllers they work with. For example, when + a controller doesn't support alternate configurations or provide + enough of the right types of endpoints, the gadget driver might + not be able work with that controller, or might need to implement + a less common variant of a device class protocol. + source "drivers/usb/gadget/legacy/Kconfig" endchoice diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 5ebe6af7976e..32176f779861 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1893,17 +1893,21 @@ unknown: /* functions always handle their interfaces and endpoints... * punt other recipients (other, WUSB, ...) to the current * configuration code. - * - * REVISIT it could make sense to let the composite device - * take such requests too, if that's ever needed: to work - * in config 0, etc. */ if (cdev->config) { list_for_each_entry(f, &cdev->config->functions, list) - if (f->req_match && f->req_match(f, ctrl)) + if (f->req_match && + f->req_match(f, ctrl, false)) goto try_fun_setup; - f = NULL; + } else { + struct usb_configuration *c; + list_for_each_entry(c, &cdev->configs, list) + list_for_each_entry(f, &c->functions, list) + if (f->req_match && + f->req_match(f, ctrl, true)) + goto try_fun_setup; } + f = NULL; switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_INTERFACE: diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index f9237fe2be05..3984787f8e97 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1211,8 +1211,9 @@ static void purge_configs_funcs(struct gadget_info *gi) list_move_tail(&f->list, &cfg->func_list); if (f->unbind) { - dev_err(&gi->cdev.gadget->dev, "unbind function" - " '%s'/%p\n", f->name, f); + dev_dbg(&gi->cdev.gadget->dev, + "unbind function '%s'/%p\n", + f->name, f); f->unbind(c, f); } } diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 5c8429f23a89..0aeed85bb5cb 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -98,6 +98,9 @@ static int ffs_func_set_alt(struct usb_function *, unsigned, unsigned); static void ffs_func_disable(struct usb_function *); static int ffs_func_setup(struct usb_function *, const struct usb_ctrlrequest *); +static bool ffs_func_req_match(struct usb_function *, + const struct usb_ctrlrequest *, + bool config0); static void ffs_func_suspend(struct usb_function *); static void ffs_func_resume(struct usb_function *); @@ -2243,7 +2246,9 @@ static int __ffs_data_got_descs(struct ffs_data *ffs, FUNCTIONFS_HAS_SS_DESC | FUNCTIONFS_HAS_MS_OS_DESC | FUNCTIONFS_VIRTUAL_ADDR | - FUNCTIONFS_EVENTFD)) { + FUNCTIONFS_EVENTFD | + FUNCTIONFS_ALL_CTRL_RECIP | + FUNCTIONFS_CONFIG0_SETUP)) { ret = -ENOSYS; goto error; } @@ -3094,8 +3099,9 @@ static int ffs_func_setup(struct usb_function *f, * handle them. All other either handled by composite or * passed to usb_configuration->setup() (if one is set). No * matter, we will handle requests directed to endpoint here - * as well (as it's straightforward) but what to do with any - * other request? + * as well (as it's straightforward). Other request recipient + * types are only handled when the user flag FUNCTIONFS_ALL_CTRL_RECIP + * is being used. */ if (ffs->state != FFS_ACTIVE) return -ENODEV; @@ -3116,7 +3122,10 @@ static int ffs_func_setup(struct usb_function *f, break; default: - return -EOPNOTSUPP; + if (func->ffs->user_flags & FUNCTIONFS_ALL_CTRL_RECIP) + ret = le16_to_cpu(creq->wIndex); + else + return -EOPNOTSUPP; } spin_lock_irqsave(&ffs->ev.waitq.lock, flags); @@ -3128,6 +3137,28 @@ static int ffs_func_setup(struct usb_function *f, return 0; } +static bool ffs_func_req_match(struct usb_function *f, + const struct usb_ctrlrequest *creq, + bool config0) +{ + struct ffs_function *func = ffs_func_from_usb(f); + + if (config0 && !(func->ffs->user_flags & FUNCTIONFS_CONFIG0_SETUP)) + return false; + + switch (creq->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_INTERFACE: + return ffs_func_revmap_intf(func, + le16_to_cpu(creq->wIndex) >= 0); + case USB_RECIP_ENDPOINT: + return ffs_func_revmap_ep(func, + le16_to_cpu(creq->wIndex) >= 0); + default: + return (bool) (func->ffs->user_flags & + FUNCTIONFS_ALL_CTRL_RECIP); + } +} + static void ffs_func_suspend(struct usb_function *f) { ENTER(); @@ -3378,6 +3409,7 @@ static struct usb_function *ffs_alloc(struct usb_function_instance *fi) func->function.set_alt = ffs_func_set_alt; func->function.disable = ffs_func_disable; func->function.setup = ffs_func_setup; + func->function.req_match = ffs_func_req_match; func->function.suspend = ffs_func_suspend; func->function.resume = ffs_func_resume; func->function.free_func = ffs_free; @@ -3470,6 +3502,11 @@ static void _ffs_free_dev(struct ffs_dev *dev) list_del(&dev->entry); if (dev->name_allocated) kfree(dev->name); + + /* Clear the private_data pointer to stop incorrect dev access */ + if (dev->ffs_data) + dev->ffs_data->private_data = NULL; + kfree(dev); if (list_empty(&ffs_devices)) functionfs_cleanup(); diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index 51980c50546d..e2966f87c860 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -365,7 +365,7 @@ static int f_hidg_open(struct inode *inode, struct file *fd) static inline struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep, unsigned length) { - return alloc_ep_req(ep, length, length); + return alloc_ep_req(ep, length); } static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req) @@ -617,14 +617,10 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f) /* preallocate request and buffer */ status = -ENOMEM; - hidg->req = usb_ep_alloc_request(hidg->in_ep, GFP_KERNEL); + hidg->req = alloc_ep_req(hidg->in_ep, hidg->report_length); if (!hidg->req) goto fail; - hidg->req->buf = kmalloc(hidg->report_length, GFP_KERNEL); - if (!hidg->req->buf) - goto fail; - /* set descriptor dynamic values */ hidg_interface_desc.bInterfaceSubClass = hidg->bInterfaceSubClass; hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol; @@ -677,11 +673,8 @@ fail_free_descs: usb_free_all_descriptors(f); fail: ERROR(f->config->cdev, "hidg_bind FAILED\n"); - if (hidg->req != NULL) { - kfree(hidg->req->buf); - if (hidg->in_ep != NULL) - usb_ep_free_request(hidg->in_ep, hidg->req); - } + if (hidg->req != NULL) + free_ep_req(hidg->in_ep, hidg->req); return status; } @@ -809,11 +802,21 @@ end: CONFIGFS_ATTR(f_hid_opts_, report_desc); +static ssize_t f_hid_opts_dev_show(struct config_item *item, char *page) +{ + struct f_hid_opts *opts = to_f_hid_opts(item); + + return sprintf(page, "%d:%d\n", major, opts->minor); +} + +CONFIGFS_ATTR_RO(f_hid_opts_, dev); + static struct configfs_attribute *hid_attrs[] = { &f_hid_opts_attr_subclass, &f_hid_opts_attr_protocol, &f_hid_opts_attr_report_length, &f_hid_opts_attr_report_desc, + &f_hid_opts_attr_dev, NULL, }; @@ -910,8 +913,7 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f) /* disable/free request and end point */ usb_ep_disable(hidg->in_ep); - kfree(hidg->req->buf); - usb_ep_free_request(hidg->in_ep, hidg->req); + free_ep_req(hidg->in_ep, hidg->req); usb_free_all_descriptors(f); } diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c index 3a9f8f9c77bd..e70093835e14 100644 --- a/drivers/usb/gadget/function/f_loopback.c +++ b/drivers/usb/gadget/function/f_loopback.c @@ -308,9 +308,7 @@ static void disable_loopback(struct f_loopback *loop) static inline struct usb_request *lb_alloc_ep_req(struct usb_ep *ep, int len) { - struct f_loopback *loop = ep->driver_data; - - return alloc_ep_req(ep, len, loop->buflen); + return alloc_ep_req(ep, len); } static int alloc_requests(struct usb_composite_dev *cdev, @@ -333,7 +331,7 @@ static int alloc_requests(struct usb_composite_dev *cdev, if (!in_req) goto fail; - out_req = lb_alloc_ep_req(loop->out_ep, 0); + out_req = lb_alloc_ep_req(loop->out_ep, loop->buflen); if (!out_req) goto fail_in; @@ -593,13 +591,9 @@ DECLARE_USB_FUNCTION(Loopback, loopback_alloc_instance, loopback_alloc); int __init lb_modinit(void) { - int ret; - - ret = usb_function_register(&Loopbackusb_func); - if (ret) - return ret; - return ret; + return usb_function_register(&Loopbackusb_func); } + void __exit lb_modexit(void) { usb_function_unregister(&Loopbackusb_func); diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 2505117e88e8..8f3659b65f53 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -311,11 +311,7 @@ struct fsg_common { /* Gadget's private data. */ void *private_data; - /* - * Vendor (8 chars), product (16 chars), release (4 - * hexadecimal digits) and NUL byte - */ - char inquiry_string[8 + 16 + 4 + 1]; + char inquiry_string[INQUIRY_STRING_LEN]; struct kref ref; }; @@ -1107,7 +1103,12 @@ static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) buf[5] = 0; /* No special options */ buf[6] = 0; buf[7] = 0; - memcpy(buf + 8, common->inquiry_string, sizeof common->inquiry_string); + if (curlun->inquiry_string[0]) + memcpy(buf + 8, curlun->inquiry_string, + sizeof(curlun->inquiry_string)); + else + memcpy(buf + 8, common->inquiry_string, + sizeof(common->inquiry_string)); return 36; } @@ -3209,12 +3210,27 @@ static ssize_t fsg_lun_opts_nofua_store(struct config_item *item, CONFIGFS_ATTR(fsg_lun_opts_, nofua); +static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item, + char *page) +{ + return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page); +} + +static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item, + const char *page, size_t len) +{ + return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len); +} + +CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string); + static struct configfs_attribute *fsg_lun_attrs[] = { &fsg_lun_opts_attr_file, &fsg_lun_opts_attr_ro, &fsg_lun_opts_attr_removable, &fsg_lun_opts_attr_cdrom, &fsg_lun_opts_attr_nofua, + &fsg_lun_opts_attr_inquiry_string, NULL, }; diff --git a/drivers/usb/gadget/function/f_mass_storage.h b/drivers/usb/gadget/function/f_mass_storage.h index b6a9918eaefb..d3902313b8ac 100644 --- a/drivers/usb/gadget/function/f_mass_storage.h +++ b/drivers/usb/gadget/function/f_mass_storage.h @@ -100,6 +100,7 @@ struct fsg_lun_config { char removable; char cdrom; char nofua; + char inquiry_string[INQUIRY_STRING_LEN]; }; struct fsg_config { diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 58fc199a18ec..a5719f271bf0 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -51,6 +51,19 @@ static const char f_midi_longname[] = "MIDI Gadget"; */ #define MAX_PORTS 16 +/* MIDI message states */ +enum { + STATE_INITIAL = 0, /* pseudo state */ + STATE_1PARAM, + STATE_2PARAM_1, + STATE_2PARAM_2, + STATE_SYSEX_0, + STATE_SYSEX_1, + STATE_SYSEX_2, + STATE_REAL_TIME, + STATE_FINISHED, /* pseudo state */ +}; + /* * This is a gadget, and the IN/OUT naming is from the host's perspective. * USB -> OUT endpoint -> rawmidi @@ -61,13 +74,6 @@ struct gmidi_in_port { int active; uint8_t cable; uint8_t state; -#define STATE_UNKNOWN 0 -#define STATE_1PARAM 1 -#define STATE_2PARAM_1 2 -#define STATE_2PARAM_2 3 -#define STATE_SYSEX_0 4 -#define STATE_SYSEX_1 5 -#define STATE_SYSEX_2 6 uint8_t data[2]; }; @@ -205,7 +211,7 @@ static struct usb_gadget_strings *midi_strings[] = { static inline struct usb_request *midi_alloc_ep_req(struct usb_ep *ep, unsigned length) { - return alloc_ep_req(ep, length, length); + return alloc_ep_req(ep, length); } static const uint8_t f_midi_cin_length[] = { @@ -299,6 +305,19 @@ f_midi_complete(struct usb_ep *ep, struct usb_request *req) } } +static void f_midi_drop_out_substreams(struct f_midi *midi) +{ + unsigned int i; + + for (i = 0; i < midi->in_ports; i++) { + struct gmidi_in_port *port = midi->in_ports_array + i; + struct snd_rawmidi_substream *substream = port->substream; + + if (port->active && substream) + snd_rawmidi_drop_output(substream); + } +} + static int f_midi_start_ep(struct f_midi *midi, struct usb_function *f, struct usb_ep *ep) @@ -360,9 +379,8 @@ static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt) /* allocate a bunch of read buffers and queue them all at once. */ for (i = 0; i < midi->qlen && err == 0; i++) { struct usb_request *req = - midi_alloc_ep_req(midi->out_ep, - max_t(unsigned, midi->buflen, - bulk_out_desc.wMaxPacketSize)); + midi_alloc_ep_req(midi->out_ep, midi->buflen); + if (req == NULL) return -ENOMEM; @@ -397,6 +415,8 @@ static void f_midi_disable(struct usb_function *f) /* release IN requests */ while (kfifo_get(&midi->in_req_fifo, &req)) free_ep_req(midi->in_ep, req); + + f_midi_drop_out_substreams(midi); } static int f_midi_snd_free(struct snd_device *device) @@ -404,130 +424,166 @@ static int f_midi_snd_free(struct snd_device *device) return 0; } -static void f_midi_transmit_packet(struct usb_request *req, uint8_t p0, - uint8_t p1, uint8_t p2, uint8_t p3) -{ - unsigned length = req->length; - u8 *buf = (u8 *)req->buf + length; - - buf[0] = p0; - buf[1] = p1; - buf[2] = p2; - buf[3] = p3; - req->length = length + 4; -} - /* * Converts MIDI commands to USB MIDI packets. */ static void f_midi_transmit_byte(struct usb_request *req, struct gmidi_in_port *port, uint8_t b) { - uint8_t p0 = port->cable << 4; + uint8_t p[4] = { port->cable << 4, 0, 0, 0 }; + uint8_t next_state = STATE_INITIAL; + + switch (b) { + case 0xf8 ... 0xff: + /* System Real-Time Messages */ + p[0] |= 0x0f; + p[1] = b; + next_state = port->state; + port->state = STATE_REAL_TIME; + break; - if (b >= 0xf8) { - f_midi_transmit_packet(req, p0 | 0x0f, b, 0, 0); - } else if (b >= 0xf0) { + case 0xf7: + /* End of SysEx */ + switch (port->state) { + case STATE_SYSEX_0: + p[0] |= 0x05; + p[1] = 0xf7; + next_state = STATE_FINISHED; + break; + case STATE_SYSEX_1: + p[0] |= 0x06; + p[1] = port->data[0]; + p[2] = 0xf7; + next_state = STATE_FINISHED; + break; + case STATE_SYSEX_2: + p[0] |= 0x07; + p[1] = port->data[0]; + p[2] = port->data[1]; + p[3] = 0xf7; + next_state = STATE_FINISHED; + break; + default: + /* Ignore byte */ + next_state = port->state; + port->state = STATE_INITIAL; + } + break; + + case 0xf0 ... 0xf6: + /* System Common Messages */ + port->data[0] = port->data[1] = 0; + port->state = STATE_INITIAL; switch (b) { case 0xf0: port->data[0] = b; - port->state = STATE_SYSEX_1; + port->data[1] = 0; + next_state = STATE_SYSEX_1; break; case 0xf1: case 0xf3: port->data[0] = b; - port->state = STATE_1PARAM; + next_state = STATE_1PARAM; break; case 0xf2: port->data[0] = b; - port->state = STATE_2PARAM_1; + next_state = STATE_2PARAM_1; break; case 0xf4: case 0xf5: - port->state = STATE_UNKNOWN; + next_state = STATE_INITIAL; break; case 0xf6: - f_midi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0); - port->state = STATE_UNKNOWN; - break; - case 0xf7: - switch (port->state) { - case STATE_SYSEX_0: - f_midi_transmit_packet(req, - p0 | 0x05, 0xf7, 0, 0); - break; - case STATE_SYSEX_1: - f_midi_transmit_packet(req, - p0 | 0x06, port->data[0], 0xf7, 0); - break; - case STATE_SYSEX_2: - f_midi_transmit_packet(req, - p0 | 0x07, port->data[0], - port->data[1], 0xf7); - break; - } - port->state = STATE_UNKNOWN; + p[0] |= 0x05; + p[1] = 0xf6; + next_state = STATE_FINISHED; break; } - } else if (b >= 0x80) { + break; + + case 0x80 ... 0xef: + /* + * Channel Voice Messages, Channel Mode Messages + * and Control Change Messages. + */ port->data[0] = b; + port->data[1] = 0; + port->state = STATE_INITIAL; if (b >= 0xc0 && b <= 0xdf) - port->state = STATE_1PARAM; + next_state = STATE_1PARAM; else - port->state = STATE_2PARAM_1; - } else { /* b < 0x80 */ + next_state = STATE_2PARAM_1; + break; + + case 0x00 ... 0x7f: + /* Message parameters */ switch (port->state) { case STATE_1PARAM: - if (port->data[0] < 0xf0) { - p0 |= port->data[0] >> 4; - } else { - p0 |= 0x02; - port->state = STATE_UNKNOWN; - } - f_midi_transmit_packet(req, p0, port->data[0], b, 0); + if (port->data[0] < 0xf0) + p[0] |= port->data[0] >> 4; + else + p[0] |= 0x02; + + p[1] = port->data[0]; + p[2] = b; + /* This is to allow Running State Messages */ + next_state = STATE_1PARAM; break; case STATE_2PARAM_1: port->data[1] = b; - port->state = STATE_2PARAM_2; + next_state = STATE_2PARAM_2; break; case STATE_2PARAM_2: - if (port->data[0] < 0xf0) { - p0 |= port->data[0] >> 4; - port->state = STATE_2PARAM_1; - } else { - p0 |= 0x03; - port->state = STATE_UNKNOWN; - } - f_midi_transmit_packet(req, - p0, port->data[0], port->data[1], b); + if (port->data[0] < 0xf0) + p[0] |= port->data[0] >> 4; + else + p[0] |= 0x03; + + p[1] = port->data[0]; + p[2] = port->data[1]; + p[3] = b; + /* This is to allow Running State Messages */ + next_state = STATE_2PARAM_1; break; case STATE_SYSEX_0: port->data[0] = b; - port->state = STATE_SYSEX_1; + next_state = STATE_SYSEX_1; break; case STATE_SYSEX_1: port->data[1] = b; - port->state = STATE_SYSEX_2; + next_state = STATE_SYSEX_2; break; case STATE_SYSEX_2: - f_midi_transmit_packet(req, - p0 | 0x04, port->data[0], port->data[1], b); - port->state = STATE_SYSEX_0; + p[0] |= 0x04; + p[1] = port->data[0]; + p[2] = port->data[1]; + p[3] = b; + next_state = STATE_SYSEX_0; break; } + break; } -} -static void f_midi_drop_out_substreams(struct f_midi *midi) -{ - unsigned int i; + /* States where we have to write into the USB request */ + if (next_state == STATE_FINISHED || + port->state == STATE_SYSEX_2 || + port->state == STATE_1PARAM || + port->state == STATE_2PARAM_2 || + port->state == STATE_REAL_TIME) { - for (i = 0; i < midi->in_ports; i++) { - struct gmidi_in_port *port = midi->in_ports_array + i; - struct snd_rawmidi_substream *substream = port->substream; - if (port->active && substream) - snd_rawmidi_drop_output(substream); + unsigned int length = req->length; + u8 *buf = (u8 *)req->buf + length; + + memcpy(buf, p, sizeof(p)); + req->length = length + sizeof(p); + + if (next_state == STATE_FINISHED) { + next_state = STATE_INITIAL; + port->data[0] = port->data[1] = 0; + } } + + port->state = next_state; } static int f_midi_do_transmit(struct f_midi *midi, struct usb_ep *ep) @@ -642,7 +698,7 @@ static int f_midi_in_open(struct snd_rawmidi_substream *substream) VDBG(midi, "%s()\n", __func__); port = midi->in_ports_array + substream->number; port->substream = substream; - port->state = STATE_UNKNOWN; + port->state = STATE_INITIAL; return 0; } @@ -1123,7 +1179,7 @@ static struct usb_function_instance *f_midi_alloc_inst(void) opts->func_inst.free_func_inst = f_midi_free_inst; opts->index = SNDRV_DEFAULT_IDX1; opts->id = SNDRV_DEFAULT_STR1; - opts->buflen = 256; + opts->buflen = 512; opts->qlen = 32; opts->in_ports = 1; opts->out_ports = 1; diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 97f0a9bc84df..639603722709 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -90,7 +90,9 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f) /* peak (theoretical) bulk transfer rate in bits-per-second */ static inline unsigned ncm_bitrate(struct usb_gadget *g) { - if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) + return 13 * 1024 * 8 * 1000 * 8; + else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) return 13 * 512 * 8 * 1000 * 8; else return 19 * 64 * 1 * 1000 * 8; @@ -333,6 +335,76 @@ static struct usb_descriptor_header *ncm_hs_function[] = { NULL, }; + +/* super speed support: */ + +static struct usb_endpoint_descriptor ss_ncm_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(NCM_STATUS_BYTECOUNT), + .bInterval = USB_MS_TO_HS_INTERVAL(NCM_STATUS_INTERVAL_MS) +}; + +static struct usb_ss_ep_comp_descriptor ss_ncm_notify_comp_desc = { + .bLength = sizeof(ss_ncm_notify_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /* the following 3 values can be tweaked if necessary */ + /* .bMaxBurst = 0, */ + /* .bmAttributes = 0, */ + .wBytesPerInterval = cpu_to_le16(NCM_STATUS_BYTECOUNT), +}; + +static struct usb_endpoint_descriptor ss_ncm_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_endpoint_descriptor ss_ncm_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor ss_ncm_bulk_comp_desc = { + .bLength = sizeof(ss_ncm_bulk_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /* the following 2 values can be tweaked if necessary */ + /* .bMaxBurst = 0, */ + /* .bmAttributes = 0, */ +}; + +static struct usb_descriptor_header *ncm_ss_function[] = { + (struct usb_descriptor_header *) &ncm_iad_desc, + /* CDC NCM control descriptors */ + (struct usb_descriptor_header *) &ncm_control_intf, + (struct usb_descriptor_header *) &ncm_header_desc, + (struct usb_descriptor_header *) &ncm_union_desc, + (struct usb_descriptor_header *) &ecm_desc, + (struct usb_descriptor_header *) &ncm_desc, + (struct usb_descriptor_header *) &ss_ncm_notify_desc, + (struct usb_descriptor_header *) &ss_ncm_notify_comp_desc, + /* data interface, altsettings 0 and 1 */ + (struct usb_descriptor_header *) &ncm_data_nop_intf, + (struct usb_descriptor_header *) &ncm_data_intf, + (struct usb_descriptor_header *) &ss_ncm_in_desc, + (struct usb_descriptor_header *) &ss_ncm_bulk_comp_desc, + (struct usb_descriptor_header *) &ss_ncm_out_desc, + (struct usb_descriptor_header *) &ss_ncm_bulk_comp_desc, + NULL, +}; + /* string descriptors: */ #define STRING_CTRL_IDX 0 @@ -852,6 +924,8 @@ static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) */ ncm->port.is_zlp_ok = gadget_is_zlp_supported(cdev->gadget); + ncm->port.no_skb_reserve = + gadget_avoids_skb_reserve(cdev->gadget); ncm->port.cdc_filter = DEFAULT_FILTER; DBG(cdev, "activate ncm\n"); net = gether_connect(&ncm->port); @@ -1431,8 +1505,13 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) hs_ncm_notify_desc.bEndpointAddress = fs_ncm_notify_desc.bEndpointAddress; + ss_ncm_in_desc.bEndpointAddress = fs_ncm_in_desc.bEndpointAddress; + ss_ncm_out_desc.bEndpointAddress = fs_ncm_out_desc.bEndpointAddress; + ss_ncm_notify_desc.bEndpointAddress = + fs_ncm_notify_desc.bEndpointAddress; + status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function, - NULL, NULL); + ncm_ss_function, NULL); if (status) goto fail; @@ -1450,6 +1529,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) ncm->task_timer.function = ncm_tx_timeout; DBG(cdev, "CDC Network: %s speed IN/%s OUT/%s NOTIFY/%s\n", + gadget_is_superspeed(c->cdev->gadget) ? "super" : gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", ncm->port.in_ep->name, ncm->port.out_ep->name, ncm->notify->name); diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index 64706a789580..0de36cda6e41 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -889,13 +889,17 @@ static void printer_soft_reset(struct printer_dev *dev) /*-------------------------------------------------------------------------*/ static bool gprinter_req_match(struct usb_function *f, - const struct usb_ctrlrequest *ctrl) + const struct usb_ctrlrequest *ctrl, + bool config0) { struct printer_dev *dev = func_to_printer(f); u16 w_index = le16_to_cpu(ctrl->wIndex); u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); + if (config0) + return false; + if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE || (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS) return false; diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c index df0189ddfdd5..8784fa12ea2c 100644 --- a/drivers/usb/gadget/function/f_sourcesink.c +++ b/drivers/usb/gadget/function/f_sourcesink.c @@ -293,9 +293,7 @@ static struct usb_gadget_strings *sourcesink_strings[] = { static inline struct usb_request *ss_alloc_ep_req(struct usb_ep *ep, int len) { - struct f_sourcesink *ss = ep->driver_data; - - return alloc_ep_req(ep, len, ss->buflen); + return alloc_ep_req(ep, len); } static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep) @@ -606,7 +604,7 @@ static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in, } else { ep = is_in ? ss->in_ep : ss->out_ep; qlen = ss->bulk_qlen; - size = 0; + size = ss->buflen; } for (i = 0; i < qlen; i++) { diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c index 29b41b5dee04..27ed51b5082f 100644 --- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -258,6 +258,13 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req)); v4l2_event_queue(&uvc->vdev, &v4l2_event); + /* Pass additional setup data to userspace */ + if (uvc->event_setup_out && uvc->event_length) { + uvc->control_req->length = uvc->event_length; + return usb_ep_queue(uvc->func.config->cdev->gadget->ep0, + uvc->control_req, GFP_ATOMIC); + } + return 0; } diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c index 990df221c629..8fbf6861690d 100644 --- a/drivers/usb/gadget/function/storage_common.c +++ b/drivers/usb/gadget/function/storage_common.c @@ -369,6 +369,12 @@ ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf) } EXPORT_SYMBOL_GPL(fsg_show_removable); +ssize_t fsg_show_inquiry_string(struct fsg_lun *curlun, char *buf) +{ + return sprintf(buf, "%s\n", curlun->inquiry_string); +} +EXPORT_SYMBOL_GPL(fsg_show_inquiry_string); + /* * The caller must hold fsg->filesem for reading when calling this function. */ @@ -499,4 +505,22 @@ ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, } EXPORT_SYMBOL_GPL(fsg_store_removable); +ssize_t fsg_store_inquiry_string(struct fsg_lun *curlun, const char *buf, + size_t count) +{ + const size_t len = min(count, sizeof(curlun->inquiry_string)); + + if (len == 0 || buf[0] == '\n') { + curlun->inquiry_string[0] = 0; + } else { + snprintf(curlun->inquiry_string, + sizeof(curlun->inquiry_string), "%-28s", buf); + if (curlun->inquiry_string[len-1] == '\n') + curlun->inquiry_string[len-1] = ' '; + } + + return count; +} +EXPORT_SYMBOL_GPL(fsg_store_inquiry_string); + MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/function/storage_common.h b/drivers/usb/gadget/function/storage_common.h index c3544e61da66..e69848994cb4 100644 --- a/drivers/usb/gadget/function/storage_common.h +++ b/drivers/usb/gadget/function/storage_common.h @@ -88,6 +88,12 @@ do { \ #define ASC(x) ((u8) ((x) >> 8)) #define ASCQ(x) ((u8) (x)) +/* + * Vendor (8 chars), product (16 chars), release (4 hexadecimal digits) and NUL + * byte + */ +#define INQUIRY_STRING_LEN ((size_t) (8 + 16 + 4 + 1)) + struct fsg_lun { struct file *filp; loff_t file_length; @@ -112,6 +118,7 @@ struct fsg_lun { struct device dev; const char *name; /* "lun.name" */ const char **name_pfx; /* "function.name" */ + char inquiry_string[INQUIRY_STRING_LEN]; }; static inline bool fsg_lun_is_open(struct fsg_lun *curlun) @@ -210,6 +217,7 @@ ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf); ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf); ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, char *buf); +ssize_t fsg_show_inquiry_string(struct fsg_lun *curlun, char *buf); ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf); ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf); ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem, @@ -221,5 +229,7 @@ ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem, const char *buf, size_t count); ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, size_t count); +ssize_t fsg_store_inquiry_string(struct fsg_lun *curlun, const char *buf, + size_t count); #endif /* USB_STORAGE_COMMON_H */ diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 5f562c1ec795..9c8c9ed1dc9e 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -82,6 +82,7 @@ struct eth_dev { #define WORK_RX_MEMORY 0 bool zlp; + bool no_skb_reserve; u8 host_mac[ETH_ALEN]; u8 dev_mac[ETH_ALEN]; }; @@ -233,7 +234,8 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) * but on at least one, checksumming fails otherwise. Note: * RNDIS headers involve variable numbers of LE32 values. */ - skb_reserve(skb, NET_IP_ALIGN); + if (likely(!dev->no_skb_reserve)) + skb_reserve(skb, NET_IP_ALIGN); req->buf = skb->data; req->length = size; @@ -569,7 +571,8 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, req->complete = tx_complete; /* NCM requires no zlp if transfer is dwNtbInMaxSize */ - if (dev->port_usb->is_fixed && + if (dev->port_usb && + dev->port_usb->is_fixed && length == dev->port_usb->fixed_in_len && (length % in->maxpacket) == 0) req->zero = 0; @@ -1063,6 +1066,7 @@ struct net_device *gether_connect(struct gether *link) if (result == 0) { dev->zlp = link->is_zlp_ok; + dev->no_skb_reserve = link->no_skb_reserve; DBG(dev, "qlen %d\n", qlen(dev->gadget, dev->qmult)); dev->header_len = link->header_len; diff --git a/drivers/usb/gadget/function/u_ether.h b/drivers/usb/gadget/function/u_ether.h index c77145bd6b5b..81d94a7ae4b4 100644 --- a/drivers/usb/gadget/function/u_ether.h +++ b/drivers/usb/gadget/function/u_ether.h @@ -64,6 +64,7 @@ struct gether { struct usb_ep *out_ep; bool is_zlp_ok; + bool no_skb_reserve; u16 cdc_filter; diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c index fc2ac150f5ff..0bf39c3ccdb1 100644 --- a/drivers/usb/gadget/legacy/gmidi.c +++ b/drivers/usb/gadget/legacy/gmidi.c @@ -47,7 +47,7 @@ static char *id = SNDRV_DEFAULT_STR1; module_param(id, charp, S_IRUGO); MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter."); -static unsigned int buflen = 256; +static unsigned int buflen = 512; module_param(buflen, uint, S_IRUGO); MODULE_PARM_DESC(buflen, "MIDI buffer length"); diff --git a/drivers/usb/gadget/u_f.c b/drivers/usb/gadget/u_f.c index 4bc7eea8bfc8..18839732c840 100644 --- a/drivers/usb/gadget/u_f.c +++ b/drivers/usb/gadget/u_f.c @@ -12,14 +12,16 @@ */ #include "u_f.h" +#include <linux/usb/ch9.h> -struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len) +struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len) { struct usb_request *req; req = usb_ep_alloc_request(ep, GFP_ATOMIC); if (req) { - req->length = len ?: default_len; + req->length = usb_endpoint_dir_out(ep->desc) ? + usb_ep_align(ep, len) : len; req->buf = kmalloc(req->length, GFP_ATOMIC); if (!req->buf) { usb_ep_free_request(ep, req); diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h index 4247cc098a89..7d53a4773d1a 100644 --- a/drivers/usb/gadget/u_f.h +++ b/drivers/usb/gadget/u_f.h @@ -47,8 +47,21 @@ struct usb_ep; struct usb_request; -/* Requests allocated via alloc_ep_req() must be freed by free_ep_req(). */ -struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len); +/** + * alloc_ep_req - returns a usb_request allocated by the gadget driver and + * allocates the request's buffer. + * + * @ep: the endpoint to allocate a usb_request + * @len: usb_requests's buffer suggested size + * + * In case @ep direction is OUT, the @len will be aligned to ep's + * wMaxPacketSize. In order to avoid memory leaks or drops, *always* use + * usb_requests's length (req->length) to refer to the allocated buffer size. + * Requests allocated via alloc_ep_req() *must* be freed by free_ep_req(). + */ +struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len); + +/* Frees a usb_request previously allocated by alloc_ep_req() */ static inline void free_ep_req(struct usb_ep *ep, struct usb_request *req) { kfree(req->buf); diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 40c04bb25f2f..9483489080f6 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -107,10 +107,8 @@ int usb_ep_enable(struct usb_ep *ep) goto out; ret = ep->ops->enable(ep, ep->desc); - if (ret) { - ret = ret; + if (ret) goto out; - } ep->enabled = true; diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index 8bb011ea78f7..4fff51b8a18e 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -421,10 +421,8 @@ static int qe_ep_rxbd_update(struct qe_ep *ep) bd = ep->rxbase; ep->rxframe = kmalloc(sizeof(*ep->rxframe), GFP_ATOMIC); - if (ep->rxframe == NULL) { - dev_err(ep->udc->dev, "malloc rxframe failed\n"); + if (!ep->rxframe) return -ENOMEM; - } qe_frame_init(ep->rxframe); @@ -435,9 +433,7 @@ static int qe_ep_rxbd_update(struct qe_ep *ep) size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (bdring_len + 1); ep->rxbuffer = kzalloc(size, GFP_ATOMIC); - if (ep->rxbuffer == NULL) { - dev_err(ep->udc->dev, "malloc rxbuffer failed,size=%d\n", - size); + if (!ep->rxbuffer) { kfree(ep->rxframe); return -ENOMEM; } @@ -668,10 +664,8 @@ static int qe_ep_init(struct qe_udc *udc, if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_IN)) { ep->txframe = kmalloc(sizeof(*ep->txframe), GFP_ATOMIC); - if (ep->txframe == NULL) { - dev_err(udc->dev, "malloc txframe failed\n"); + if (!ep->txframe) goto en_done2; - } qe_frame_init(ep->txframe); } @@ -2344,10 +2338,8 @@ static struct qe_udc *qe_udc_config(struct platform_device *ofdev) u32 offset; udc = kzalloc(sizeof(*udc), GFP_KERNEL); - if (udc == NULL) { - dev_err(&ofdev->dev, "malloc udc failed\n"); + if (!udc) goto cleanup; - } udc->dev = &ofdev->dev; diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c index d2205d9e0c8b..5107987bd353 100644 --- a/drivers/usb/gadget/udc/goku_udc.c +++ b/drivers/usb/gadget/udc/goku_udc.c @@ -1767,8 +1767,7 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* alloc, and start init */ dev = kzalloc (sizeof *dev, GFP_KERNEL); - if (dev == NULL){ - pr_debug("enomem %s\n", pci_name(pdev)); + if (!dev) { retval = -ENOMEM; goto err; } @@ -1839,6 +1838,8 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) err: if (dev) goku_remove (pdev); + /* gadget_release is not registered yet, kfree explicitly */ + kfree(dev); return retval; } diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index 614ab951a4ae..61c938c36d88 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -589,7 +589,7 @@ static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req) ep = container_of(_ep, struct net2280_ep, ep); if (!_ep || !_req) { - dev_err(&ep->dev->pdev->dev, "%s: Inavlid ep=%p or req=%p\n", + dev_err(&ep->dev->pdev->dev, "%s: Invalid ep=%p or req=%p\n", __func__, _ep, _req); return; } @@ -1137,8 +1137,10 @@ dma_done(struct net2280_ep *ep, struct net2280_request *req, u32 dmacount, done(ep, req, status); } -static void scan_dma_completions(struct net2280_ep *ep) +static int scan_dma_completions(struct net2280_ep *ep) { + int num_completed = 0; + /* only look at descriptors that were "naturally" retired, * so fifo and list head state won't matter */ @@ -1166,6 +1168,7 @@ static void scan_dma_completions(struct net2280_ep *ep) break; /* single transfer mode */ dma_done(ep, req, tmp, 0); + num_completed++; break; } else if (!ep->is_in && (req->req.length % ep->ep.maxpacket) && @@ -1194,7 +1197,10 @@ static void scan_dma_completions(struct net2280_ep *ep) } } dma_done(ep, req, tmp, 0); + num_completed++; } + + return num_completed; } static void restart_dma(struct net2280_ep *ep) @@ -1567,6 +1573,44 @@ static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget, return ep; } + /* USB3380: Only first four endpoints have DMA channels. Allocate + * slower interrupt endpoints from PIO hw endpoints, to allow bulk/isoc + * endpoints use DMA hw endpoints. + */ + if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep2in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep4in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } else if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + !usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep1out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep3out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK && + usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep1in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep3in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK && + !usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep2out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep4out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } + /* USB3380: use same address for usb and hardware endpoints */ snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc), usb_endpoint_dir_in(desc) ? "in" : "out"); @@ -2547,8 +2591,11 @@ static void handle_ep_small(struct net2280_ep *ep) /* manual DMA queue advance after short OUT */ if (likely(ep->dma)) { if (t & BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT)) { - u32 count; + struct net2280_request *stuck_req = NULL; int stopped = ep->stopped; + int num_completed; + int stuck = 0; + u32 count; /* TRANSFERRED works around OUT_DONE erratum 0112. * we expect (N <= maxpacket) bytes; host wrote M. @@ -2560,7 +2607,7 @@ static void handle_ep_small(struct net2280_ep *ep) /* any preceding dma transfers must finish. * dma handles (M >= N), may empty the queue */ - scan_dma_completions(ep); + num_completed = scan_dma_completions(ep); if (unlikely(list_empty(&ep->queue) || ep->out_overflow)) { req = NULL; @@ -2580,6 +2627,31 @@ static void handle_ep_small(struct net2280_ep *ep) req = NULL; break; } + + /* Escape loop if no dma transfers completed + * after few retries. + */ + if (num_completed == 0) { + if (stuck_req == req && + readl(&ep->dma->dmadesc) != + req->td_dma && stuck++ > 5) { + count = readl( + &ep->dma->dmacount); + count &= DMA_BYTE_COUNT_MASK; + req = NULL; + ep_dbg(ep->dev, "%s escape stuck %d, count %u\n", + ep->ep.name, stuck, + count); + break; + } else if (stuck_req != req) { + stuck_req = req; + stuck = 0; + } + } else { + stuck_req = NULL; + stuck = 0; + } + udelay(1); } diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 9b7d39484ed3..a8709f9e5648 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2875,7 +2875,7 @@ bad_on_1710: xceiv = NULL; /* "udc" is now valid */ pullup_disable(udc); -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_OHCI_HCD) udc->gadget.is_otg = (config->otg != 0); #endif diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index ad140aa00132..7fa60f5b7ae4 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -33,6 +33,7 @@ #include <linux/usb.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/usb/phy.h> #include "pxa27x_udc.h" @@ -1655,6 +1656,37 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) return -EOPNOTSUPP; } +/** + * pxa_udc_phy_event - Called by phy upon VBus event + * @nb: notifier block + * @action: phy action, is vbus connect or disconnect + * @data: the usb_gadget structure in pxa_udc + * + * Called by the USB Phy when a cable connect or disconnect is sensed. + * + * Returns 0 + */ +static int pxa_udc_phy_event(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct usb_gadget *gadget = data; + + switch (action) { + case USB_EVENT_VBUS: + usb_gadget_vbus_connect(gadget); + return NOTIFY_OK; + case USB_EVENT_NONE: + usb_gadget_vbus_disconnect(gadget); + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } +} + +static struct notifier_block pxa27x_udc_phy = { + .notifier_call = pxa_udc_phy_event, +}; + static int pxa27x_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); static int pxa27x_udc_stop(struct usb_gadget *g); @@ -2432,7 +2464,14 @@ static int pxa_udc_probe(struct platform_device *pdev) return udc->irq; udc->dev = &pdev->dev; - udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (of_have_populated_dt()) { + udc->transceiver = + devm_usb_get_phy_by_phandle(udc->dev, "phys", 0); + if (IS_ERR(udc->transceiver)) + return PTR_ERR(udc->transceiver); + } else { + udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + } if (IS_ERR(udc->gpiod)) { dev_err(&pdev->dev, "Couldn't find or request D+ gpio : %ld\n", @@ -2465,14 +2504,20 @@ static int pxa_udc_probe(struct platform_device *pdev) goto err; } + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_register_notifier(udc->transceiver, &pxa27x_udc_phy); retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (retval) - goto err; + goto err_add_gadget; pxa_init_debugfs(udc); if (should_enable_udc(udc)) udc_enable(udc); return 0; + +err_add_gadget: + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy); err: clk_unprepare(udc->clk); return retval; @@ -2489,6 +2534,8 @@ static int pxa_udc_remove(struct platform_device *_dev) usb_del_gadget_udc(&udc->gadget); pxa_cleanup_debugfs(udc); + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy); usb_put_phy(udc->transceiver); udc->transceiver = NULL; diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index f8bf290f1894..588e2531b8b8 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -973,10 +973,8 @@ static struct usb_request *xudc_ep_alloc_request(struct usb_ep *_ep, udc = ep->udc; req = kzalloc(sizeof(*req), gfp_flags); - if (!req) { - dev_err(udc->dev, "%s:not enough memory", __func__); + if (!req) return NULL; - } req->ep = ep; INIT_LIST_HEAD(&req->queue); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2e710a4cca52..0b80cee30da4 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -472,7 +472,7 @@ config USB_OHCI_HCD_AT91 config USB_OHCI_HCD_OMAP3 tristate "OHCI support for OMAP3 and later chips" - depends on (ARCH_OMAP3 || ARCH_OMAP4) + depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5) default y ---help--- Enables support for the on-chip OHCI controller on diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c index 172ef17911aa..5f425c89faf1 100644 --- a/drivers/usb/host/bcma-hcd.c +++ b/drivers/usb/host/bcma-hcd.c @@ -27,6 +27,7 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_gpio.h> +#include <linux/of_platform.h> #include <linux/usb/ehci_pdriver.h> #include <linux/usb/ohci_pdriver.h> @@ -34,6 +35,9 @@ MODULE_AUTHOR("Hauke Mehrtens"); MODULE_DESCRIPTION("Common USB driver for BCMA Bus"); MODULE_LICENSE("GPL"); +/* See BCMA_CLKCTLST_EXTRESREQ and BCMA_CLKCTLST_EXTRESST */ +#define USB_BCMA_CLKCTLST_USB_CLK_REQ 0x00000100 + struct bcma_hcd_device { struct bcma_device *core; struct platform_device *ehci_dev; @@ -165,44 +169,80 @@ static void bcma_hcd_init_chip_mips(struct bcma_device *dev) } } -static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev) +/** + * bcma_hcd_usb20_old_arm_init - Initialize old USB 2.0 controller on ARM + * + * Old USB 2.0 core is identified as BCMA_CORE_USB20_HOST and was introduced + * long before Northstar devices. It seems some cheaper chipsets like BCM53573 + * still use it. + * Initialization of this old core differs between MIPS and ARM. + */ +static int bcma_hcd_usb20_old_arm_init(struct bcma_hcd_device *usb_dev) { - struct bcma_device *arm_core; - void __iomem *dmu; - - arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9); - if (!arm_core) { - dev_err(&dev->dev, "can not find ARM Cortex A9 ihost core\n"); - return; + struct bcma_device *core = usb_dev->core; + struct device *dev = &core->dev; + struct bcma_device *pmu_core; + + usleep_range(10000, 20000); + if (core->id.rev < 5) + return 0; + + pmu_core = bcma_find_core(core->bus, BCMA_CORE_PMU); + if (!pmu_core) { + dev_err(dev, "Could not find PMU core\n"); + return -ENOENT; } - dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000); - if (!dmu) { - dev_err(&dev->dev, "can not map ARM Cortex A9 ihost core\n"); - return; - } - - /* Unlock DMU PLL settings */ - iowrite32(0x0000ea68, dmu + 0x180); - - /* Write USB 2.0 PLL control setting */ - iowrite32(0x00dd10c3, dmu + 0x164); + /* Take USB core out of reset */ + bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK | BCMA_IOCTL_FGC); + usleep_range(100, 200); + bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); + usleep_range(100, 200); + bcma_awrite32(core, BCMA_RESET_CTL, 0); + usleep_range(100, 200); + bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK); + usleep_range(100, 200); + + /* Enable Misc PLL */ + bcma_write32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT | + BCMA_CLKCTLST_HQCLKREQ | + USB_BCMA_CLKCTLST_USB_CLK_REQ); + usleep_range(100, 200); + + bcma_write32(core, 0x510, 0xc7f85000); + bcma_write32(core, 0x510, 0xc7f85003); + usleep_range(300, 600); + + /* Program USB PHY PLL parameters */ + bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x6); + bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x005360c1); + usleep_range(100, 200); + bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x7); + bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x0); + usleep_range(100, 200); + bcma_set32(pmu_core, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD); + usleep_range(100, 200); + + bcma_write32(core, 0x510, 0x7f8d007); + udelay(1000); + + /* Take controller out of reset */ + bcma_write32(core, 0x200, 0x4ff); + usleep_range(25, 50); + bcma_write32(core, 0x200, 0x6ff); + usleep_range(25, 50); + bcma_write32(core, 0x200, 0x7ff); + usleep_range(25, 50); + + of_platform_default_populate(dev->of_node, NULL, dev); - /* Lock DMU PLL settings */ - iowrite32(0x00000000, dmu + 0x180); - - iounmap(dmu); + return 0; } -static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev) +static void bcma_hcd_usb20_ns_init_hc(struct bcma_device *dev) { u32 val; - /* - * Delay after PHY initialized to ensure HC is ready to be configured - */ - usleep_range(1000, 2000); - /* Set packet buffer OUT threshold */ val = bcma_read32(dev, 0x94); val &= 0xffff; @@ -213,20 +253,33 @@ static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev) val = bcma_read32(dev, 0x9c); val |= 1; bcma_write32(dev, 0x9c, val); + + /* + * Broadcom initializes PHY and then waits to ensure HC is ready to be + * configured. In our case the order is reversed. We just initialized + * controller and we let HCD initialize PHY, so let's wait (sleep) now. + */ + usleep_range(1000, 2000); } -static void bcma_hcd_init_chip_arm(struct bcma_device *dev) +/** + * bcma_hcd_usb20_ns_init - Initialize Northstar USB 2.0 controller + */ +static int bcma_hcd_usb20_ns_init(struct bcma_hcd_device *bcma_hcd) { - bcma_core_enable(dev, 0); + struct bcma_device *core = bcma_hcd->core; + struct bcma_chipinfo *ci = &core->bus->chipinfo; + struct device *dev = &core->dev; - if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 || - dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) { - if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 || - dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708) - bcma_hcd_init_chip_arm_phy(dev); + bcma_core_enable(core, 0); - bcma_hcd_init_chip_arm_hc(dev); - } + if (ci->id == BCMA_CHIP_ID_BCM4707 || + ci->id == BCMA_CHIP_ID_BCM53018) + bcma_hcd_usb20_ns_init_hc(core); + + of_platform_default_populate(dev->of_node, NULL, dev); + + return 0; } static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val) @@ -299,16 +352,7 @@ static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev) if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32))) return -EOPNOTSUPP; - switch (dev->id.id) { - case BCMA_CORE_NS_USB20: - bcma_hcd_init_chip_arm(dev); - break; - case BCMA_CORE_USB20_HOST: - bcma_hcd_init_chip_mips(dev); - break; - default: - return -ENODEV; - } + bcma_hcd_init_chip_mips(dev); /* In AI chips EHCI is addrspace 0, OHCI is 1 */ ohci_addr = dev->addr_s[0]; @@ -338,6 +382,18 @@ err_unregister_ohci_dev: return err; } +static int bcma_hcd_usb30_init(struct bcma_hcd_device *bcma_hcd) +{ + struct bcma_device *core = bcma_hcd->core; + struct device *dev = &core->dev; + + bcma_core_enable(core, 0); + + of_platform_default_populate(dev->of_node, NULL, dev); + + return 0; +} + static int bcma_hcd_probe(struct bcma_device *core) { int err; @@ -357,14 +413,24 @@ static int bcma_hcd_probe(struct bcma_device *core) switch (core->id.id) { case BCMA_CORE_USB20_HOST: + if (IS_ENABLED(CONFIG_ARM)) + err = bcma_hcd_usb20_old_arm_init(usb_dev); + else if (IS_ENABLED(CONFIG_MIPS)) + err = bcma_hcd_usb20_init(usb_dev); + else + err = -ENOTSUPP; + break; case BCMA_CORE_NS_USB20: - err = bcma_hcd_usb20_init(usb_dev); - if (err) - return err; + err = bcma_hcd_usb20_ns_init(usb_dev); + break; + case BCMA_CORE_NS_USB30: + err = bcma_hcd_usb30_init(usb_dev); break; default: return -ENODEV; } + if (err) + return err; bcma_set_drvdata(core, usb_dev); return 0; @@ -416,6 +482,7 @@ static int bcma_hcd_resume(struct bcma_device *dev) static const struct bcma_device_id bcma_hcd_table[] = { BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS), BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS), + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB30, BCMA_ANY_REV, BCMA_ANY_CLASS), {}, }; MODULE_DEVICE_TABLE(bcma, bcma_hcd_table); diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 6816b8c371d0..876dca4fc216 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -38,7 +38,7 @@ #include "ehci.h" #define DRIVER_DESC "EHCI generic platform driver" -#define EHCI_MAX_CLKS 3 +#define EHCI_MAX_CLKS 4 #define EHCI_MAX_RSTS 3 #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv) diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 0960f41f945a..55a0ae6f2d74 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -310,10 +310,8 @@ static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci) /* allocate memory for SCC data structure */ usb = kzalloc(sizeof(*usb), GFP_KERNEL); - if (!usb) { - fhci_err(fhci, "no memory for SCC data struct\n"); + if (!usb) return NULL; - } usb->fhci = fhci; usb->hc_list = fhci->hc_list; diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 1044b0f9d656..f07ccb25bc24 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -222,23 +222,17 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) pdata->controller_ver = usb_get_ver_info(np); /* Activate Erratum by reading property in device tree */ - if (of_get_property(np, "fsl,usb-erratum-a007792", NULL)) - pdata->has_fsl_erratum_a007792 = 1; - else - pdata->has_fsl_erratum_a007792 = 0; - if (of_get_property(np, "fsl,usb-erratum-a005275", NULL)) - pdata->has_fsl_erratum_a005275 = 1; - else - pdata->has_fsl_erratum_a005275 = 0; + pdata->has_fsl_erratum_a007792 = + of_property_read_bool(np, "fsl,usb-erratum-a007792"); + pdata->has_fsl_erratum_a005275 = + of_property_read_bool(np, "fsl,usb-erratum-a005275"); /* * Determine whether phy_clk_valid needs to be checked * by reading property in device tree */ - if (of_get_property(np, "phy-clk-valid", NULL)) - pdata->check_phy_clk_valid = 1; - else - pdata->check_phy_clk_valid = 0; + pdata->check_phy_clk_valid = + of_property_read_bool(np, "phy-clk-valid"); if (pdata->have_sysif_regs) { if (pdata->controller_ver == FSL_USB_VER_NONE) { diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index 2f7690092a7f..369869a29ebd 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -1856,15 +1856,11 @@ max3421_probe(struct spi_device *spi) INIT_LIST_HEAD(&max3421_hcd->ep_list); max3421_hcd->tx = kmalloc(sizeof(*max3421_hcd->tx), GFP_KERNEL); - if (!max3421_hcd->tx) { - dev_err(&spi->dev, "failed to kmalloc tx buffer\n"); + if (!max3421_hcd->tx) goto error; - } max3421_hcd->rx = kmalloc(sizeof(*max3421_hcd->rx), GFP_KERNEL); - if (!max3421_hcd->rx) { - dev_err(&spi->dev, "failed to kmalloc rx buffer\n"); + if (!max3421_hcd->rx) goto error; - } max3421_hcd->spi_thread = kthread_run(max3421_spi_thread, hcd, "max3421_spi_thread"); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index d177372bb357..5b5880c0ae19 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -21,8 +21,11 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #include <linux/usb.h> #include <linux/usb/hcd.h> +#include <soc/at91/atmel-sfr.h> #include "ohci.h" @@ -51,6 +54,7 @@ struct ohci_at91_priv { struct clk *hclk; bool clocked; bool wakeup; /* Saved wake-up state for resume */ + struct regmap *sfr_regmap; }; /* interface and function clocks; sometimes also an AHB clock */ @@ -134,6 +138,17 @@ static void at91_stop_hc(struct platform_device *pdev) static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); +static struct regmap *at91_dt_syscon_sfr(void) +{ + struct regmap *regmap; + + regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr"); + if (IS_ERR(regmap)) + regmap = NULL; + + return regmap; +} + /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ @@ -197,6 +212,10 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, goto err; } + ohci_at91->sfr_regmap = at91_dt_syscon_sfr(); + if (!ohci_at91->sfr_regmap) + dev_warn(dev, "failed to find sfr node\n"); + board = hcd->self.controller->platform_data; ohci = hcd_to_ohci(hcd); ohci->num_ports = board->ports; @@ -282,6 +301,28 @@ static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf) return length; } +static int ohci_at91_port_suspend(struct regmap *regmap, u8 set) +{ + u32 regval; + int ret; + + if (!regmap) + return 0; + + ret = regmap_read(regmap, AT91_SFR_OHCIICR, ®val); + if (ret) + return ret; + + if (set) + regval |= AT91_OHCIICR_USB_SUSPEND; + else + regval &= ~AT91_OHCIICR_USB_SUSPEND; + + regmap_write(regmap, AT91_SFR_OHCIICR, regval); + + return 0; +} + /* * Look at the control requests to the root hub and see if we need to override. */ @@ -289,6 +330,7 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller); + struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); struct usb_hub_descriptor *desc; int ret = -EINVAL; u32 *data = (u32 *)buf; @@ -301,7 +343,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, switch (typeReq) { case SetPortFeature: - if (wValue == USB_PORT_FEAT_POWER) { + switch (wValue) { + case USB_PORT_FEAT_POWER: dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); if (valid_port(wIndex)) { ohci_at91_usb_set_power(pdata, wIndex, 1); @@ -309,6 +352,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } goto out; + + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n"); + if (valid_port(wIndex)) { + ohci_at91_port_suspend(ohci_at91->sfr_regmap, + 1); + return 0; + } + break; } break; @@ -342,6 +394,16 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, ohci_at91_usb_set_power(pdata, wIndex, 0); return 0; } + break; + + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n"); + if (valid_port(wIndex)) { + ohci_at91_port_suspend(ohci_at91->sfr_regmap, + 0); + return 0; + } + break; } break; } @@ -599,6 +661,8 @@ ohci_hcd_at91_drv_suspend(struct device *dev) if (ohci_at91->wakeup) enable_irq_wake(hcd->irq); + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); + ret = ohci_suspend(hcd, ohci_at91->wakeup); if (ret) { if (ohci_at91->wakeup) @@ -638,6 +702,9 @@ ohci_hcd_at91_drv_resume(struct device *dev) at91_start_clock(ohci_at91); ohci_resume(hcd, false); + + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); + return 0; } diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index de7c68602a7e..495c1454b9e8 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -36,7 +36,6 @@ #include <mach/mux.h> #include <mach/hardware.h> -#include <mach/irqs.h> #include <mach/usb.h> diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 2ac266d692a2..3a9ea32508df 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -13,9 +13,7 @@ * This file is licenced under the GPL. */ -#include <mach/hardware.h> #include <asm/mach-types.h> -#include <mach/assabet.h> #include <asm/hardware/sa1111.h> #ifndef CONFIG_SA1111 @@ -127,7 +125,7 @@ static int sa1111_start_hc(struct sa1111_dev *dev) dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n"); if (machine_is_xp860() || - machine_has_neponset() || + machine_is_assabet() || machine_is_pfs168() || machine_is_badge4()) usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index a7de8e8bb458..5d3d914ab4fb 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -601,11 +601,8 @@ static int uhci_start(struct usb_hcd *hcd) uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu), GFP_KERNEL); - if (!uhci->frame_cpu) { - dev_err(uhci_dev(uhci), - "unable to allocate memory for frame pointers\n"); + if (!uhci->frame_cpu) goto err_alloc_frame_cpu; - } uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci), sizeof(struct uhci_td), 16, 0); diff --git a/drivers/usb/host/whci/init.c b/drivers/usb/host/whci/init.c index e36372393bb1..ad8eb575c30a 100644 --- a/drivers/usb/host/whci/init.c +++ b/drivers/usb/host/whci/init.c @@ -65,7 +65,7 @@ int whc_init(struct whc *whc) init_waitqueue_head(&whc->cmd_wq); init_waitqueue_head(&whc->async_list_wq); init_waitqueue_head(&whc->periodic_list_wq); - whc->workqueue = create_singlethread_workqueue(dev_name(&whc->umc->dev)); + whc->workqueue = alloc_ordered_workqueue(dev_name(&whc->umc->dev), 0); if (whc->workqueue == NULL) { ret = -ENOMEM; goto error; diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 0f53ae0f464e..a59fafb4b329 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1033,7 +1033,6 @@ static int tegra_xusb_probe(struct platform_device *pdev) tegra->phys = devm_kcalloc(&pdev->dev, tegra->num_phys, sizeof(*tegra->phys), GFP_KERNEL); if (!tegra->phys) { - dev_err(&pdev->dev, "failed to allocate PHY array\n"); err = -ENOMEM; goto put_padctl; } @@ -1117,6 +1116,7 @@ static int tegra_xusb_probe(struct platform_device *pdev) tegra->hcd); if (!xhci->shared_hcd) { dev_err(&pdev->dev, "failed to create shared HCD\n"); + err = -ENOMEM; goto remove_usb2; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 01d96c9b3a75..1a4ca02729c2 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -295,10 +295,8 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) xhci->msix_entries = kmalloc((sizeof(struct msix_entry))*xhci->msix_count, GFP_KERNEL); - if (!xhci->msix_entries) { - xhci_err(xhci, "Failed to allocate MSI-X entries\n"); + if (!xhci->msix_entries) return -ENOMEM; - } for (i = 0; i < xhci->msix_count; i++) { xhci->msix_entries[i].entry = i; diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index eb8f8d37cd95..47b357760afc 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -240,6 +240,12 @@ config USB_HSIC_USB3503 help This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. +config USB_HSIC_USB4604 + tristate "USB4604 HSIC to USB20 Driver" + depends on I2C + help + This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. + config USB_LINK_LAYER_TEST tristate "USB Link Layer Test driver" help diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 3d79faaad2fb..3d1992750da4 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_USB_USS720) += uss720.o obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o obj-$(CONFIG_USB_YUREX) += yurex.o obj-$(CONFIG_USB_HSIC_USB3503) += usb3503.o +obj-$(CONFIG_USB_HSIC_USB4604) += usb4604.o obj-$(CONFIG_USB_CHAOSKEY) += chaoskey.o obj-$(CONFIG_UCSI) += ucsi.o diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 3071c0ef909b..564268fca07a 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -672,8 +672,7 @@ static int adu_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL); - if (dev == NULL) { - dev_err(&interface->dev, "Out of memory\n"); + if (!dev) { retval = -ENOMEM; goto exit; } @@ -710,7 +709,6 @@ static int adu_probe(struct usb_interface *interface, dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL); if (!dev->read_buffer_primary) { - dev_err(&interface->dev, "Couldn't allocate read_buffer_primary\n"); retval = -ENOMEM; goto error; } @@ -723,7 +721,6 @@ static int adu_probe(struct usb_interface *interface, dev->read_buffer_secondary = kmalloc((4 * in_end_size), GFP_KERNEL); if (!dev->read_buffer_secondary) { - dev_err(&interface->dev, "Couldn't allocate read_buffer_secondary\n"); retval = -ENOMEM; goto error; } @@ -735,29 +732,21 @@ static int adu_probe(struct usb_interface *interface, memset(dev->read_buffer_secondary + (3 * in_end_size), 'h', in_end_size); dev->interrupt_in_buffer = kmalloc(in_end_size, GFP_KERNEL); - if (!dev->interrupt_in_buffer) { - dev_err(&interface->dev, "Couldn't allocate interrupt_in_buffer\n"); + if (!dev->interrupt_in_buffer) goto error; - } /* debug code prime the buffer */ memset(dev->interrupt_in_buffer, 'i', in_end_size); dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->interrupt_in_urb) { - dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n"); + if (!dev->interrupt_in_urb) goto error; - } dev->interrupt_out_buffer = kmalloc(out_end_size, GFP_KERNEL); - if (!dev->interrupt_out_buffer) { - dev_err(&interface->dev, "Couldn't allocate interrupt_out_buffer\n"); + if (!dev->interrupt_out_buffer) goto error; - } dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->interrupt_out_urb) { - dev_err(&interface->dev, "Couldn't allocate interrupt_out_urb\n"); + if (!dev->interrupt_out_urb) goto error; - } if (!usb_string(udev, udev->descriptor.iSerialNumber, dev->serial_number, sizeof(dev->serial_number))) { diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index a0a3827b4aff..da5ff401a354 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -85,7 +85,6 @@ struct appledisplay { }; static atomic_t count_displays = ATOMIC_INIT(0); -static struct workqueue_struct *wq; static void appledisplay_complete(struct urb *urb) { @@ -122,7 +121,7 @@ static void appledisplay_complete(struct urb *urb) case ACD_BTN_BRIGHT_UP: case ACD_BTN_BRIGHT_DOWN: pdata->button_pressed = 1; - queue_delayed_work(wq, &pdata->work, 0); + schedule_delayed_work(&pdata->work, 0); break; case ACD_BTN_NONE: default: @@ -239,7 +238,6 @@ static int appledisplay_probe(struct usb_interface *iface, pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL); if (!pdata) { retval = -ENOMEM; - dev_err(&iface->dev, "Out of memory\n"); goto error; } @@ -253,8 +251,6 @@ static int appledisplay_probe(struct usb_interface *iface, pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL); if (!pdata->msgdata) { retval = -ENOMEM; - dev_err(&iface->dev, - "Allocating buffer for control messages failed\n"); goto error; } @@ -262,7 +258,6 @@ static int appledisplay_probe(struct usb_interface *iface, pdata->urb = usb_alloc_urb(0, GFP_KERNEL); if (!pdata->urb) { retval = -ENOMEM; - dev_err(&iface->dev, "Allocating URB failed\n"); goto error; } @@ -344,7 +339,7 @@ static void appledisplay_disconnect(struct usb_interface *iface) if (pdata) { usb_kill_urb(pdata->urb); - cancel_delayed_work(&pdata->work); + cancel_delayed_work_sync(&pdata->work); backlight_device_unregister(pdata->bd); usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN, pdata->urbdata, pdata->urb->transfer_dma); @@ -365,19 +360,11 @@ static struct usb_driver appledisplay_driver = { static int __init appledisplay_init(void) { - wq = create_singlethread_workqueue("appledisplay"); - if (!wq) { - printk(KERN_ERR "appledisplay: Could not create work queue\n"); - return -ENOMEM; - } - return usb_register(&appledisplay_driver); } static void __exit appledisplay_exit(void) { - flush_workqueue(wq); - destroy_workqueue(wq); usb_deregister(&appledisplay_driver); } diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index 402b94dd2531..5c93a888c40e 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -79,7 +79,6 @@ static int vendor_command(struct cypress *dev, unsigned char request, /* allocate some memory for the i/o buffer*/ iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL); if (!iobuf) { - dev_err(&dev->udev->dev, "Out of memory!\n"); retval = -ENOMEM; goto error; } @@ -208,10 +207,8 @@ static int cypress_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (dev == NULL) { - dev_err(&interface->dev, "Out of memory!\n"); + if (!dev) goto error_mem; - } dev->udev = usb_get_dev(interface_to_usbdev(interface)); diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c index 9bab1a33bc16..9d8bb8dacdcd 100644 --- a/drivers/usb/misc/cytherm.c +++ b/drivers/usb/misc/cytherm.c @@ -101,10 +101,8 @@ static ssize_t set_brightness(struct device *dev, struct device_attribute *attr, int retval; buffer = kmalloc(8, GFP_KERNEL); - if (!buffer) { - dev_err(&cytherm->udev->dev, "out of memory\n"); + if (!buffer) return 0; - } cytherm->brightness = simple_strtoul(buf, NULL, 10); @@ -148,10 +146,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char int temp, sign; buffer = kmalloc(8, GFP_KERNEL); - if (!buffer) { - dev_err(&cytherm->udev->dev, "out of memory\n"); + if (!buffer) return 0; - } /* read temperature */ retval = vendor_command(cytherm->udev, READ_RAM, TEMP, 0, buffer, 8); @@ -192,10 +188,8 @@ static ssize_t show_button(struct device *dev, struct device_attribute *attr, ch unsigned char *buffer; buffer = kmalloc(8, GFP_KERNEL); - if (!buffer) { - dev_err(&cytherm->udev->dev, "out of memory\n"); + if (!buffer) return 0; - } /* check button */ retval = vendor_command(cytherm->udev, READ_RAM, BUTTON, 0, buffer, 8); @@ -230,10 +224,8 @@ static ssize_t show_port0(struct device *dev, struct device_attribute *attr, cha unsigned char *buffer; buffer = kmalloc(8, GFP_KERNEL); - if (!buffer) { - dev_err(&cytherm->udev->dev, "out of memory\n"); + if (!buffer) return 0; - } retval = vendor_command(cytherm->udev, READ_PORT, 0, 0, buffer, 8); if (retval) @@ -257,10 +249,8 @@ static ssize_t set_port0(struct device *dev, struct device_attribute *attr, cons int tmp; buffer = kmalloc(8, GFP_KERNEL); - if (!buffer) { - dev_err(&cytherm->udev->dev, "out of memory\n"); + if (!buffer) return 0; - } tmp = simple_strtoul(buf, NULL, 10); @@ -290,10 +280,8 @@ static ssize_t show_port1(struct device *dev, struct device_attribute *attr, cha unsigned char *buffer; buffer = kmalloc(8, GFP_KERNEL); - if (!buffer) { - dev_err(&cytherm->udev->dev, "out of memory\n"); + if (!buffer) return 0; - } retval = vendor_command(cytherm->udev, READ_PORT, 1, 0, buffer, 8); if (retval) @@ -317,10 +305,8 @@ static ssize_t set_port1(struct device *dev, struct device_attribute *attr, cons int tmp; buffer = kmalloc(8, GFP_KERNEL); - if (!buffer) { - dev_err(&cytherm->udev->dev, "out of memory\n"); + if (!buffer) return 0; - } tmp = simple_strtoul(buf, NULL, 10); @@ -351,10 +337,8 @@ static int cytherm_probe(struct usb_interface *interface, int retval = -ENOMEM; dev = kzalloc (sizeof(struct usb_cytherm), GFP_KERNEL); - if (dev == NULL) { - dev_err (&interface->dev, "Out of memory\n"); + if (!dev) goto error_mem; - } dev->udev = usb_get_dev(udev); diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c index 947811bc8126..837208f14f86 100644 --- a/drivers/usb/misc/ezusb.c +++ b/drivers/usb/misc/ezusb.c @@ -22,7 +22,7 @@ struct ezusb_fx_type { unsigned short max_internal_adress; }; -static struct ezusb_fx_type ezusb_fx1 = { +static const struct ezusb_fx_type ezusb_fx1 = { .cpucs_reg = 0x7F92, .max_internal_adress = 0x1B3F, }; diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 9b5b3b2281ca..9a82f8308ad7 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -61,9 +61,6 @@ module_param(distrust_firmware, bool, 0); MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurrent setup"); extern struct platform_driver u132_platform_driver; -static struct workqueue_struct *status_queue; -static struct workqueue_struct *command_queue; -static struct workqueue_struct *respond_queue; /* * ftdi_module_lock exists to protect access to global variables * @@ -228,56 +225,56 @@ static void ftdi_elan_init_kref(struct usb_ftdi *ftdi) static void ftdi_status_requeue_work(struct usb_ftdi *ftdi, unsigned int delta) { - if (!queue_delayed_work(status_queue, &ftdi->status_work, delta)) + if (!schedule_delayed_work(&ftdi->status_work, delta)) kref_put(&ftdi->kref, ftdi_elan_delete); } static void ftdi_status_queue_work(struct usb_ftdi *ftdi, unsigned int delta) { - if (queue_delayed_work(status_queue, &ftdi->status_work, delta)) + if (schedule_delayed_work(&ftdi->status_work, delta)) kref_get(&ftdi->kref); } static void ftdi_status_cancel_work(struct usb_ftdi *ftdi) { - if (cancel_delayed_work(&ftdi->status_work)) + if (cancel_delayed_work_sync(&ftdi->status_work)) kref_put(&ftdi->kref, ftdi_elan_delete); } static void ftdi_command_requeue_work(struct usb_ftdi *ftdi, unsigned int delta) { - if (!queue_delayed_work(command_queue, &ftdi->command_work, delta)) + if (!schedule_delayed_work(&ftdi->command_work, delta)) kref_put(&ftdi->kref, ftdi_elan_delete); } static void ftdi_command_queue_work(struct usb_ftdi *ftdi, unsigned int delta) { - if (queue_delayed_work(command_queue, &ftdi->command_work, delta)) + if (schedule_delayed_work(&ftdi->command_work, delta)) kref_get(&ftdi->kref); } static void ftdi_command_cancel_work(struct usb_ftdi *ftdi) { - if (cancel_delayed_work(&ftdi->command_work)) + if (cancel_delayed_work_sync(&ftdi->command_work)) kref_put(&ftdi->kref, ftdi_elan_delete); } static void ftdi_response_requeue_work(struct usb_ftdi *ftdi, unsigned int delta) { - if (!queue_delayed_work(respond_queue, &ftdi->respond_work, delta)) + if (!schedule_delayed_work(&ftdi->respond_work, delta)) kref_put(&ftdi->kref, ftdi_elan_delete); } static void ftdi_respond_queue_work(struct usb_ftdi *ftdi, unsigned int delta) { - if (queue_delayed_work(respond_queue, &ftdi->respond_work, delta)) + if (schedule_delayed_work(&ftdi->respond_work, delta)) kref_get(&ftdi->kref); } static void ftdi_response_cancel_work(struct usb_ftdi *ftdi) { - if (cancel_delayed_work(&ftdi->respond_work)) + if (cancel_delayed_work_sync(&ftdi->respond_work)) kref_put(&ftdi->kref, ftdi_elan_delete); } @@ -785,11 +782,8 @@ static int ftdi_elan_command_engine(struct usb_ftdi *ftdi) return 0; total_size = ftdi_elan_total_command_size(ftdi, command_size); urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&ftdi->udev->dev, "could not get a urb to write %d commands totaling %d bytes to the Uxxx\n", - command_size, total_size); + if (!urb) return -ENOMEM; - } buf = usb_alloc_coherent(ftdi->udev, total_size, GFP_KERNEL, &urb->transfer_dma); if (!buf) { @@ -1948,10 +1942,8 @@ static int ftdi_elan_synchronize_flush(struct usb_ftdi *ftdi) int I = 257; int i = 0; urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&ftdi->udev->dev, "could not alloc a urb for flush sequence\n"); + if (!urb) return -ENOMEM; - } buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma); if (!buf) { dev_err(&ftdi->udev->dev, "could not get a buffer for flush sequence\n"); @@ -1988,10 +1980,8 @@ static int ftdi_elan_synchronize_reset(struct usb_ftdi *ftdi) int I = 4; int i = 0; urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&ftdi->udev->dev, "could not get a urb for the reset sequence\n"); + if (!urb) return -ENOMEM; - } buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma); if (!buf) { dev_err(&ftdi->udev->dev, "could not get a buffer for the reset sequence\n"); @@ -2740,7 +2730,6 @@ static int ftdi_elan_probe(struct usb_interface *interface, ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress; ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!ftdi->bulk_in_buffer) { - dev_err(&ftdi->udev->dev, "Could not allocate bulk_in_buffer\n"); retval = -ENOMEM; goto error; } @@ -2823,9 +2812,6 @@ static void ftdi_elan_disconnect(struct usb_interface *interface) ftdi->initialized = 0; ftdi->registered = 0; } - flush_workqueue(status_queue); - flush_workqueue(command_queue); - flush_workqueue(respond_queue); ftdi->disconnected += 1; usb_set_intfdata(interface, NULL); dev_info(&ftdi->udev->dev, "USB FTDI U132 host controller interface now disconnected\n"); @@ -2845,31 +2831,12 @@ static int __init ftdi_elan_init(void) pr_info("driver %s\n", ftdi_elan_driver.name); mutex_init(&ftdi_module_lock); INIT_LIST_HEAD(&ftdi_static_list); - status_queue = create_singlethread_workqueue("ftdi-status-control"); - if (!status_queue) - goto err_status_queue; - command_queue = create_singlethread_workqueue("ftdi-command-engine"); - if (!command_queue) - goto err_command_queue; - respond_queue = create_singlethread_workqueue("ftdi-respond-engine"); - if (!respond_queue) - goto err_respond_queue; result = usb_register(&ftdi_elan_driver); if (result) { - destroy_workqueue(status_queue); - destroy_workqueue(command_queue); - destroy_workqueue(respond_queue); pr_err("usb_register failed. Error number %d\n", result); } return result; -err_respond_queue: - destroy_workqueue(command_queue); -err_command_queue: - destroy_workqueue(status_queue); -err_status_queue: - pr_err("%s couldn't create workqueue\n", ftdi_elan_driver.name); - return -ENOMEM; } static void __exit ftdi_elan_exit(void) @@ -2882,15 +2849,7 @@ static void __exit ftdi_elan_exit(void) ftdi_status_cancel_work(ftdi); ftdi_command_cancel_work(ftdi); ftdi_response_cancel_work(ftdi); - } flush_workqueue(status_queue); - destroy_workqueue(status_queue); - status_queue = NULL; - flush_workqueue(command_queue); - destroy_workqueue(command_queue); - command_queue = NULL; - flush_workqueue(respond_queue); - destroy_workqueue(respond_queue); - respond_queue = NULL; + } } diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 5105397e62fc..2975e80b7a56 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -366,7 +366,6 @@ static int idmouse_probe(struct usb_interface *interface, kmalloc(IMGSIZE + dev->bulk_in_size, GFP_KERNEL); if (!dev->bulk_in_buffer) { - dev_err(&interface->dev, "Unable to allocate input buffer.\n"); idmouse_delete(dev); return -ENOMEM; } diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 1950e87b4219..095778ff984d 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -278,7 +278,7 @@ static ssize_t iowarrior_read(struct file *file, char __user *buffer, dev = file->private_data; /* verify that the device wasn't unplugged */ - if (dev == NULL || !dev->present) + if (!dev || !dev->present) return -ENODEV; dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n", @@ -413,8 +413,6 @@ static ssize_t iowarrior_write(struct file *file, int_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!int_out_urb) { retval = -ENOMEM; - dev_dbg(&dev->interface->dev, - "Unable to allocate urb\n"); goto error_no_urb; } buf = usb_alloc_coherent(dev->udev, dev->report_size, @@ -482,9 +480,8 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, int io_res; /* checks for bytes read/written and copy_to/from_user results */ dev = file->private_data; - if (dev == NULL) { + if (!dev) return -ENODEV; - } buffer = kzalloc(dev->report_size, GFP_KERNEL); if (!buffer) @@ -654,9 +651,8 @@ static int iowarrior_release(struct inode *inode, struct file *file) int retval = 0; dev = file->private_data; - if (dev == NULL) { + if (!dev) return -ENODEV; - } dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor); @@ -766,10 +762,8 @@ static int iowarrior_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL); - if (dev == NULL) { - dev_err(&interface->dev, "Out of memory\n"); + if (!dev) return retval; - } mutex_init(&dev->mutex); @@ -812,15 +806,11 @@ static int iowarrior_probe(struct usb_interface *interface, /* create the urb and buffer for reading */ dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->int_in_urb) { - dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n"); + if (!dev->int_in_urb) goto error; - } dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL); - if (!dev->int_in_buffer) { - dev_err(&interface->dev, "Couldn't allocate int_in_buffer\n"); + if (!dev->int_in_buffer) goto error; - } usb_fill_int_urb(dev->int_in_urb, dev->udev, usb_rcvintpipe(dev->udev, dev->int_in_endpoint->bEndpointAddress), @@ -831,10 +821,8 @@ static int iowarrior_probe(struct usb_interface *interface, dev->read_queue = kmalloc(((dev->report_size + 1) * MAX_INTERRUPT_BUFFER), GFP_KERNEL); - if (!dev->read_queue) { - dev_err(&interface->dev, "Couldn't allocate read_queue\n"); + if (!dev->read_queue) goto error; - } /* Get the serial-number of the chip */ memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial)); usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial, diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index cce22ff1c2eb..9ca595632f17 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -658,10 +658,8 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (dev == NULL) { - dev_err(&intf->dev, "Out of memory\n"); + if (!dev) goto exit; - } mutex_init(&dev->mutex); spin_lock_init(&dev->rbsl); dev->intf = intf; @@ -674,10 +672,8 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_COM3LAB)) && (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) { buffer = kmalloc(256, GFP_KERNEL); - if (buffer == NULL) { - dev_err(&intf->dev, "Couldn't allocate string buffer\n"); + if (!buffer) goto error; - } /* usb_string makes SETUP+STALL to leave always ControlReadLoop */ usb_string(udev, 255, buffer, 256); kfree(buffer); @@ -704,32 +700,22 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint); dev->ring_buffer = kmalloc(ring_buffer_size*(sizeof(size_t)+dev->interrupt_in_endpoint_size), GFP_KERNEL); - if (!dev->ring_buffer) { - dev_err(&intf->dev, "Couldn't allocate ring_buffer\n"); + if (!dev->ring_buffer) goto error; - } dev->interrupt_in_buffer = kmalloc(dev->interrupt_in_endpoint_size, GFP_KERNEL); - if (!dev->interrupt_in_buffer) { - dev_err(&intf->dev, "Couldn't allocate interrupt_in_buffer\n"); + if (!dev->interrupt_in_buffer) goto error; - } dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->interrupt_in_urb) { - dev_err(&intf->dev, "Couldn't allocate interrupt_in_urb\n"); + if (!dev->interrupt_in_urb) goto error; - } dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? usb_endpoint_maxp(dev->interrupt_out_endpoint) : udev->descriptor.bMaxPacketSize0; dev->interrupt_out_buffer = kmalloc(write_buffer_size*dev->interrupt_out_endpoint_size, GFP_KERNEL); - if (!dev->interrupt_out_buffer) { - dev_err(&intf->dev, "Couldn't allocate interrupt_out_buffer\n"); + if (!dev->interrupt_out_buffer) goto error; - } dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->interrupt_out_urb) { - dev_err(&intf->dev, "Couldn't allocate interrupt_out_urb\n"); + if (!dev->interrupt_out_urb) goto error; - } dev->interrupt_in_interval = min_interrupt_in_interval > dev->interrupt_in_endpoint->bInterval ? min_interrupt_in_interval : dev->interrupt_in_endpoint->bInterval; if (dev->interrupt_out_endpoint) dev->interrupt_out_interval = min_interrupt_out_interval > dev->interrupt_out_endpoint->bInterval ? min_interrupt_out_interval : dev->interrupt_out_endpoint->bInterval; diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 7771be3ac178..c8fbe7b739a0 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -817,10 +817,8 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL); - if (dev == NULL) { - dev_err(idev, "Out of memory\n"); + if (!dev) goto exit; - } mutex_init(&dev->lock); @@ -871,51 +869,23 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device } dev->read_buffer = kmalloc (read_buffer_size, GFP_KERNEL); - if (!dev->read_buffer) { - dev_err(idev, "Couldn't allocate read_buffer\n"); + if (!dev->read_buffer) goto error; - } dev->interrupt_in_buffer = kmalloc (usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL); - if (!dev->interrupt_in_buffer) { - dev_err(idev, "Couldn't allocate interrupt_in_buffer\n"); + if (!dev->interrupt_in_buffer) goto error; - } dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->interrupt_in_urb) { - dev_err(idev, "Couldn't allocate interrupt_in_urb\n"); + if (!dev->interrupt_in_urb) goto error; - } dev->interrupt_out_buffer = kmalloc (write_buffer_size, GFP_KERNEL); - if (!dev->interrupt_out_buffer) { - dev_err(idev, "Couldn't allocate interrupt_out_buffer\n"); + if (!dev->interrupt_out_buffer) goto error; - } dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->interrupt_out_urb) { - dev_err(idev, "Couldn't allocate interrupt_out_urb\n"); + if (!dev->interrupt_out_urb) goto error; - } dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval; dev->interrupt_out_interval = interrupt_out_interval ? interrupt_out_interval : dev->interrupt_out_endpoint->bInterval; - /* we can register the device now, as it is ready */ - usb_set_intfdata (interface, dev); - - retval = usb_register_dev (interface, &tower_class); - - if (retval) { - /* something prevented us from registering this driver */ - dev_err(idev, "Not able to get a minor for this device.\n"); - usb_set_intfdata (interface, NULL); - goto error; - } - dev->minor = interface->minor; - - /* let the user know what node this device is now attached to */ - dev_info(&interface->dev, "LEGO USB Tower #%d now attached to major " - "%d minor %d\n", (dev->minor - LEGO_USB_TOWER_MINOR_BASE), - USB_MAJOR, dev->minor); - /* get the firmware version and log it */ result = usb_control_msg (udev, usb_rcvctrlpipe(udev, 0), @@ -936,6 +906,23 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device get_version_reply.minor, le16_to_cpu(get_version_reply.build_no)); + /* we can register the device now, as it is ready */ + usb_set_intfdata (interface, dev); + + retval = usb_register_dev (interface, &tower_class); + + if (retval) { + /* something prevented us from registering this driver */ + dev_err(idev, "Not able to get a minor for this device.\n"); + usb_set_intfdata (interface, NULL); + goto error; + } + dev->minor = interface->minor; + + /* let the user know what node this device is now attached to */ + dev_info(&interface->dev, "LEGO USB Tower #%d now attached to major " + "%d minor %d\n", (dev->minor - LEGO_USB_TOWER_MINOR_BASE), + USB_MAJOR, dev->minor); exit: return retval; diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c index 86b4e4b2ab9a..77176511658f 100644 --- a/drivers/usb/misc/lvstest.c +++ b/drivers/usb/misc/lvstest.c @@ -34,8 +34,6 @@ struct lvs_rh { struct usb_hub_descriptor descriptor; /* urb for polling interrupt pipe */ struct urb *urb; - /* LVS RH work queue */ - struct workqueue_struct *rh_queue; /* LVH RH work */ struct work_struct rh_work; /* RH port status */ @@ -247,10 +245,8 @@ static ssize_t get_dev_desc_store(struct device *dev, int ret; descriptor = kmalloc(sizeof(*descriptor), GFP_KERNEL); - if (!descriptor) { - dev_err(dev, "failed to allocate descriptor memory\n"); + if (!descriptor) return -ENOMEM; - } udev = create_lvs_device(intf); if (!udev) { @@ -355,7 +351,7 @@ static void lvs_rh_irq(struct urb *urb) { struct lvs_rh *lvs = urb->context; - queue_work(lvs->rh_queue, &lvs->rh_work); + schedule_work(&lvs->rh_work); } static int lvs_rh_probe(struct usb_interface *intf, @@ -397,24 +393,15 @@ static int lvs_rh_probe(struct usb_interface *intf, /* submit urb to poll interrupt endpoint */ lvs->urb = usb_alloc_urb(0, GFP_KERNEL); - if (!lvs->urb) { - dev_err(&intf->dev, "couldn't allocate lvs urb\n"); + if (!lvs->urb) return -ENOMEM; - } - - lvs->rh_queue = create_singlethread_workqueue("lvs_rh_queue"); - if (!lvs->rh_queue) { - dev_err(&intf->dev, "couldn't create workqueue\n"); - ret = -ENOMEM; - goto free_urb; - } INIT_WORK(&lvs->rh_work, lvs_rh_work); ret = sysfs_create_group(&intf->dev.kobj, &lvs_attr_group); if (ret < 0) { dev_err(&intf->dev, "Failed to create sysfs node %d\n", ret); - goto destroy_queue; + goto free_urb; } pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress); @@ -432,8 +419,6 @@ static int lvs_rh_probe(struct usb_interface *intf, sysfs_remove: sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group); -destroy_queue: - destroy_workqueue(lvs->rh_queue); free_urb: usb_free_urb(lvs->urb); return ret; @@ -444,7 +429,7 @@ static void lvs_rh_disconnect(struct usb_interface *intf) struct lvs_rh *lvs = usb_get_intfdata(intf); sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group); - destroy_workqueue(lvs->rh_queue); + flush_work(&lvs->rh_work); usb_free_urb(lvs->urb); } diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 02abfcdfbf7b..05bd39d62568 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3084,7 +3084,6 @@ static int sisusb_probe(struct usb_interface *intf, /* Allocate URBs */ sisusb->sisurbin = usb_alloc_urb(0, GFP_KERNEL); if (!sisusb->sisurbin) { - dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate URBs\n"); retval = -ENOMEM; goto error_3; } @@ -3093,8 +3092,6 @@ static int sisusb_probe(struct usb_interface *intf, for (i = 0; i < sisusb->numobufs; i++) { sisusb->sisurbout[i] = usb_alloc_urb(0, GFP_KERNEL); if (!sisusb->sisurbout[i]) { - dev_err(&sisusb->sisusb_dev->dev, - "Failed to allocate URBs\n"); retval = -ENOMEM; goto error_4; } diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c index 4145314a515b..9795457723d8 100644 --- a/drivers/usb/misc/trancevibrator.c +++ b/drivers/usb/misc/trancevibrator.c @@ -95,8 +95,7 @@ static int tv_probe(struct usb_interface *interface, int retval; dev = kzalloc(sizeof(struct trancevibrator), GFP_KERNEL); - if (dev == NULL) { - dev_err(&interface->dev, "Out of memory\n"); + if (!dev) { retval = -ENOMEM; goto error; } diff --git a/drivers/usb/misc/usb4604.c b/drivers/usb/misc/usb4604.c new file mode 100644 index 000000000000..e9f37fb746ac --- /dev/null +++ b/drivers/usb/misc/usb4604.c @@ -0,0 +1,175 @@ +/* + * Driver for SMSC USB4604 USB HSIC 4-port 2.0 hub controller driver + * Based on usb3503 driver + * + * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com) + * Copyright (c) 2016 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/gpio/consumer.h> + +enum usb4604_mode { + USB4604_MODE_UNKNOWN, + USB4604_MODE_HUB, + USB4604_MODE_STANDBY, +}; + +struct usb4604 { + enum usb4604_mode mode; + struct device *dev; + struct gpio_desc *gpio_reset; +}; + +static void usb4604_reset(struct usb4604 *hub, int state) +{ + gpiod_set_value_cansleep(hub->gpio_reset, state); + + /* Wait for i2c logic to come up */ + if (state) + msleep(250); +} + +static int usb4604_connect(struct usb4604 *hub) +{ + struct device *dev = hub->dev; + struct i2c_client *client = to_i2c_client(dev); + int err; + u8 connect_cmd[] = { 0xaa, 0x55, 0x00 }; + + usb4604_reset(hub, 1); + + err = i2c_master_send(client, connect_cmd, ARRAY_SIZE(connect_cmd)); + if (err < 0) { + usb4604_reset(hub, 0); + return err; + } + + hub->mode = USB4604_MODE_HUB; + dev_dbg(dev, "switched to HUB mode\n"); + + return 0; +} + +static int usb4604_switch_mode(struct usb4604 *hub, enum usb4604_mode mode) +{ + struct device *dev = hub->dev; + int err = 0; + + switch (mode) { + case USB4604_MODE_HUB: + err = usb4604_connect(hub); + break; + + case USB4604_MODE_STANDBY: + usb4604_reset(hub, 0); + dev_dbg(dev, "switched to STANDBY mode\n"); + break; + + default: + dev_err(dev, "unknown mode is requested\n"); + err = -EINVAL; + break; + } + + return err; +} + +static int usb4604_probe(struct usb4604 *hub) +{ + struct device *dev = hub->dev; + struct device_node *np = dev->of_node; + struct gpio_desc *gpio; + u32 mode = USB4604_MODE_HUB; + + gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); + hub->gpio_reset = gpio; + + if (of_property_read_u32(np, "initial-mode", &hub->mode)) + hub->mode = mode; + + return usb4604_switch_mode(hub, hub->mode); +} + +static int usb4604_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct usb4604 *hub; + + hub = devm_kzalloc(&i2c->dev, sizeof(*hub), GFP_KERNEL); + if (!hub) + return -ENOMEM; + + i2c_set_clientdata(i2c, hub); + hub->dev = &i2c->dev; + + return usb4604_probe(hub); +} + +#ifdef CONFIG_PM_SLEEP +static int usb4604_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct usb4604 *hub = i2c_get_clientdata(client); + + usb4604_switch_mode(hub, USB4604_MODE_STANDBY); + + return 0; +} + +static int usb4604_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct usb4604 *hub = i2c_get_clientdata(client); + + usb4604_switch_mode(hub, hub->mode); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(usb4604_i2c_pm_ops, usb4604_i2c_suspend, + usb4604_i2c_resume); + +static const struct i2c_device_id usb4604_id[] = { + { "usb4604", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, usb4604_id); + +#ifdef CONFIG_OF +static const struct of_device_id usb4604_of_match[] = { + { .compatible = "smsc,usb4604" }, + {} +}; +MODULE_DEVICE_TABLE(of, usb4604_of_match); +#endif + +static struct i2c_driver usb4604_i2c_driver = { + .driver = { + .name = "usb4604", + .pm = &usb4604_i2c_pm_ops, + .of_match_table = of_match_ptr(usb4604_of_match), + }, + .probe = usb4604_i2c_probe, + .id_table = usb4604_id, +}; +module_i2c_driver(usb4604_i2c_driver); + +MODULE_DESCRIPTION("USB4604 USB HUB driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 1184390508e9..9f48419abc46 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -321,10 +321,8 @@ static int lcd_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (dev == NULL) { - dev_err(&interface->dev, "Out of memory\n"); + if (!dev) goto error; - } kref_init(&dev->kref); sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES); init_usb_anchor(&dev->submitted); @@ -351,11 +349,8 @@ static int lcd_probe(struct usb_interface *interface, dev->bulk_in_size = buffer_size; dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!dev->bulk_in_buffer) { - dev_err(&interface->dev, - "Could not allocate bulk_in_buffer\n"); + if (!dev->bulk_in_buffer) goto error; - } } if (!dev->bulk_out_endpointAddr && diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c index 1fe6b73c22f3..a0ba5298160c 100644 --- a/drivers/usb/misc/usbsevseg.c +++ b/drivers/usb/misc/usbsevseg.c @@ -128,10 +128,8 @@ static void update_display_visual(struct usb_sevsegdev *mydev, gfp_t mf) return; buffer = kzalloc(MAXLEN, mf); - if (!buffer) { - dev_err(&mydev->udev->dev, "out of memory\n"); + if (!buffer) return; - } /* The device is right to left, where as you write left to right */ for (i = 0; i < mydev->textlength; i++) @@ -346,10 +344,8 @@ static int sevseg_probe(struct usb_interface *interface, int rc = -ENOMEM; mydev = kzalloc(sizeof(struct usb_sevsegdev), GFP_KERNEL); - if (mydev == NULL) { - dev_err(&interface->dev, "Out of memory\n"); + if (!mydev) goto error_mem; - } mydev->udev = usb_get_dev(udev); mydev->intf = interface; diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index bbd029c9c725..356d312add57 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -150,10 +150,8 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p if (!usbdev) return NULL; rq = kzalloc(sizeof(struct uss720_async_request), mem_flags); - if (!rq) { - dev_err(&usbdev->dev, "submit_async_request out of memory\n"); + if (!rq) return NULL; - } kref_init(&rq->ref_count); INIT_LIST_HEAD(&rq->asynclist); init_completion(&rq->compl); @@ -162,7 +160,6 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p rq->urb = usb_alloc_urb(0, mem_flags); if (!rq->urb) { kref_put(&rq->ref_count, destroy_async); - dev_err(&usbdev->dev, "submit_async_request out of memory\n"); return NULL; } rq->dr = kmalloc(sizeof(*rq->dr), mem_flags); diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 343fa6ff9f4b..54e53ac4c08f 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -200,10 +200,8 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - dev_err(&interface->dev, "Out of memory\n"); + if (!dev) goto error; - } kref_init(&dev->kref); mutex_init(&dev->io_mutex); spin_lock_init(&dev->lock); @@ -231,17 +229,13 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ /* allocate control URB */ dev->cntl_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->cntl_urb) { - dev_err(&interface->dev, "Could not allocate control URB\n"); + if (!dev->cntl_urb) goto error; - } /* allocate buffer for control req */ dev->cntl_req = kmalloc(YUREX_BUF_SIZE, GFP_KERNEL); - if (!dev->cntl_req) { - dev_err(&interface->dev, "Could not allocate cntl_req\n"); + if (!dev->cntl_req) goto error; - } /* allocate buffer for control msg */ dev->cntl_buffer = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE, @@ -269,10 +263,8 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ /* allocate interrupt URB */ dev->urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->urb) { - dev_err(&interface->dev, "Could not allocate URB\n"); + if (!dev->urb) goto error; - } /* allocate buffer for interrupt in */ dev->int_buffer = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE, diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 73cfa13fc0dc..72a2a5040848 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -82,7 +82,7 @@ config USB_MUSB_DA8XX tristate "DA8xx/OMAP-L1x" depends on ARCH_DAVINCI_DA8XX depends on NOP_USB_XCEIV - depends on BROKEN + select PHY_DA8XX_USB config USB_MUSB_TUSB6010 tristate "TUSB6010" diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index c41fe588d14d..50ca8052bc8e 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -474,10 +474,8 @@ static int am35x_probe(struct platform_device *pdev) int ret = -ENOMEM; glue = kzalloc(sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&pdev->dev, "failed to allocate glue context\n"); + if (!glue) goto err0; - } phy_clk = clk_get(&pdev->dev, "fck"); if (IS_ERR(phy_clk)) { @@ -512,8 +510,10 @@ static int am35x_probe(struct platform_device *pdev) pdata->platform_ops = &am35x_ops; glue->phy = usb_phy_generic_register(); - if (IS_ERR(glue->phy)) + if (IS_ERR(glue->phy)) { + ret = PTR_ERR(glue->phy); goto err7; + } platform_set_drvdata(pdev, glue); pinfo = am35x_dev_info; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index b03d3b867fca..210b7e43a6fd 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -30,13 +30,11 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/usb_phy_generic.h> -#include <mach/da8xx.h> -#include <linux/platform_data/usb-davinci.h> - #include "musb_core.h" /* @@ -80,61 +78,15 @@ #define DA8XX_MENTOR_CORE_OFFSET 0x400 -#define CFGCHIP2 IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG) - struct da8xx_glue { struct device *dev; struct platform_device *musb; - struct platform_device *phy; + struct platform_device *usb_phy; struct clk *clk; + struct phy *phy; }; /* - * REVISIT (PM): we should be able to keep the PHY in low power mode most - * of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0 - * and, when in host mode, autosuspending idle root ports... PHY_PLLON - * (overriding SUSPENDM?) then likely needs to stay off. - */ - -static inline void phy_on(void) -{ - u32 cfgchip2 = __raw_readl(CFGCHIP2); - - /* - * Start the on-chip PHY and its PLL. - */ - cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN); - cfgchip2 |= CFGCHIP2_PHY_PLLON; - __raw_writel(cfgchip2, CFGCHIP2); - - pr_info("Waiting for USB PHY clock good...\n"); - while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD)) - cpu_relax(); -} - -static inline void phy_off(void) -{ - u32 cfgchip2 = __raw_readl(CFGCHIP2); - - /* - * Ensure that USB 1.1 reference clock is not being sourced from - * USB 2.0 PHY. Otherwise do not power down the PHY. - */ - if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX) && - (cfgchip2 & CFGCHIP2_USB1SUSPENDM)) { - pr_warning("USB 1.1 clocked from USB 2.0 PHY -- " - "can't power it down\n"); - return; - } - - /* - * Power down the on-chip PHY. - */ - cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN; - __raw_writel(cfgchip2, CFGCHIP2); -} - -/* * Because we don't set CTRL.UINT, it's "important" to: * - not read/write INTRUSB/INTRUSBE (except during * initial setup, as a workaround); @@ -385,29 +337,29 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode) { - u32 cfgchip2 = __raw_readl(CFGCHIP2); + struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent); + enum phy_mode phy_mode; - cfgchip2 &= ~CFGCHIP2_OTGMODE; switch (musb_mode) { case MUSB_HOST: /* Force VBUS valid, ID = 0 */ - cfgchip2 |= CFGCHIP2_FORCE_HOST; + phy_mode = PHY_MODE_USB_HOST; break; case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ - cfgchip2 |= CFGCHIP2_FORCE_DEVICE; + phy_mode = PHY_MODE_USB_DEVICE; break; case MUSB_OTG: /* Don't override the VBUS/ID comparators */ - cfgchip2 |= CFGCHIP2_NO_OVERRIDE; + phy_mode = PHY_MODE_USB_OTG; break; default: - dev_dbg(musb->controller, "Trying to set unsupported mode %u\n", musb_mode); + return -EINVAL; } - __raw_writel(cfgchip2, CFGCHIP2); - return 0; + return phy_set_mode(glue->phy, phy_mode); } static int da8xx_musb_init(struct musb *musb) { + struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent); void __iomem *reg_base = musb->ctrl_base; u32 rev; int ret = -ENODEV; @@ -425,32 +377,56 @@ static int da8xx_musb_init(struct musb *musb) goto fail; } + ret = clk_prepare_enable(glue->clk); + if (ret) { + dev_err(glue->dev, "failed to enable clock\n"); + goto fail; + } + setup_timer(&otg_workaround, otg_timer, (unsigned long)musb); /* Reset the controller */ musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK); /* Start the on-chip PHY and its PLL. */ - phy_on(); + ret = phy_init(glue->phy); + if (ret) { + dev_err(glue->dev, "Failed to init phy.\n"); + goto err_phy_init; + } + + ret = phy_power_on(glue->phy); + if (ret) { + dev_err(glue->dev, "Failed to power on phy.\n"); + goto err_phy_power_on; + } msleep(5); /* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */ - pr_debug("DA8xx OTG revision %08x, PHY %03x, control %02x\n", - rev, __raw_readl(CFGCHIP2), + pr_debug("DA8xx OTG revision %08x, control %02x\n", rev, musb_readb(reg_base, DA8XX_USB_CTRL_REG)); musb->isr = da8xx_musb_interrupt; return 0; + +err_phy_power_on: + phy_exit(glue->phy); +err_phy_init: + clk_disable_unprepare(glue->clk); fail: return ret; } static int da8xx_musb_exit(struct musb *musb) { + struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent); + del_timer_sync(&otg_workaround); - phy_off(); + phy_power_off(glue->phy); + phy_exit(glue->phy); + clk_disable_unprepare(glue->clk); usb_put_phy(musb->xceiv); @@ -486,30 +462,25 @@ static int da8xx_probe(struct platform_device *pdev) { struct resource musb_resources[2]; struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct platform_device *musb; struct da8xx_glue *glue; struct platform_device_info pinfo; struct clk *clk; + int ret; - int ret = -ENOMEM; - - glue = kzalloc(sizeof(*glue), GFP_KERNEL); - if (!glue) { - dev_err(&pdev->dev, "failed to allocate glue context\n"); - goto err0; - } + glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; - clk = clk_get(&pdev->dev, "usb20"); + clk = devm_clk_get(&pdev->dev, "usb20"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); - ret = PTR_ERR(clk); - goto err3; + return PTR_ERR(clk); } - ret = clk_enable(clk); - if (ret) { - dev_err(&pdev->dev, "failed to enable clock\n"); - goto err4; + glue->phy = devm_phy_get(&pdev->dev, "usb-phy"); + if (IS_ERR(glue->phy)) { + dev_err(&pdev->dev, "failed to get phy\n"); + return PTR_ERR(glue->phy); } glue->dev = &pdev->dev; @@ -517,10 +488,11 @@ static int da8xx_probe(struct platform_device *pdev) pdata->platform_ops = &da8xx_ops; - glue->phy = usb_phy_generic_register(); - if (IS_ERR(glue->phy)) { - ret = PTR_ERR(glue->phy); - goto err5; + glue->usb_phy = usb_phy_generic_register(); + ret = PTR_ERR_OR_ZERO(glue->usb_phy); + if (ret) { + dev_err(&pdev->dev, "failed to register usb_phy\n"); + return ret; } platform_set_drvdata(pdev, glue); @@ -544,28 +516,13 @@ static int da8xx_probe(struct platform_device *pdev) pinfo.data = pdata; pinfo.size_data = sizeof(*pdata); - glue->musb = musb = platform_device_register_full(&pinfo); - if (IS_ERR(musb)) { - ret = PTR_ERR(musb); + glue->musb = platform_device_register_full(&pinfo); + ret = PTR_ERR_OR_ZERO(glue->musb); + if (ret) { dev_err(&pdev->dev, "failed to register musb device: %d\n", ret); - goto err6; + usb_phy_generic_unregister(glue->usb_phy); } - return 0; - -err6: - usb_phy_generic_unregister(glue->phy); - -err5: - clk_disable(clk); - -err4: - clk_put(clk); - -err3: - kfree(glue); - -err0: return ret; } @@ -574,10 +531,7 @@ static int da8xx_remove(struct platform_device *pdev) struct da8xx_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); - usb_phy_generic_unregister(glue->phy); - clk_disable(glue->clk); - clk_put(glue->clk); - kfree(glue); + usb_phy_generic_unregister(glue->usb_phy); return 0; } diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 74fc3069cb42..27dadc0d9114 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1448,7 +1448,7 @@ static int musb_core_init(u16 musb_type, struct musb *musb) { u8 reg; char *type; - char aInfo[90], aRevision[32], aDate[12]; + char aInfo[90]; void __iomem *mbase = musb->mregs; int status = 0; int i; @@ -1482,7 +1482,6 @@ static int musb_core_init(u16 musb_type, struct musb *musb) pr_debug("%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo); - aDate[0] = 0; if (MUSB_CONTROLLER_MHDRC == musb_type) { musb->is_multipoint = 1; type = "M"; @@ -1497,11 +1496,10 @@ static int musb_core_init(u16 musb_type, struct musb *musb) /* log release info */ musb->hwvers = musb_read_hwvers(mbase); - snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers), - MUSB_HWVERS_MINOR(musb->hwvers), - (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : ""); - pr_debug("%s: %sHDRC RTL version %s %s\n", - musb_driver_name, type, aRevision, aDate); + pr_debug("%s: %sHDRC RTL version %d.%d%s\n", + musb_driver_name, type, MUSB_HWVERS_MAJOR(musb->hwvers), + MUSB_HWVERS_MINOR(musb->hwvers), + (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : ""); /* configure ep0 */ musb_configure_ep0(musb); @@ -1831,11 +1829,80 @@ static const struct attribute_group musb_attr_group = { .attrs = musb_attributes, }; +#define MUSB_QUIRK_B_INVALID_VBUS_91 (MUSB_DEVCTL_BDEVICE | \ + (2 << MUSB_DEVCTL_VBUS_SHIFT) | \ + MUSB_DEVCTL_SESSION) +#define MUSB_QUIRK_A_DISCONNECT_19 ((3 << MUSB_DEVCTL_VBUS_SHIFT) | \ + MUSB_DEVCTL_SESSION) + +/* + * Check the musb devctl session bit to determine if we want to + * allow PM runtime for the device. In general, we want to keep things + * active when the session bit is set except after host disconnect. + * + * Only called from musb_irq_work. If this ever needs to get called + * elsewhere, proper locking must be implemented for musb->session. + */ +static void musb_pm_runtime_check_session(struct musb *musb) +{ + u8 devctl, s; + int error; + + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + + /* Handle session status quirks first */ + s = MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV | + MUSB_DEVCTL_HR; + switch (devctl & ~s) { + case MUSB_QUIRK_B_INVALID_VBUS_91: + if (!musb->session && !musb->quirk_invalid_vbus) { + musb->quirk_invalid_vbus = true; + musb_dbg(musb, + "First invalid vbus, assume no session"); + return; + } + break; + case MUSB_QUIRK_A_DISCONNECT_19: + if (!musb->session) + break; + musb_dbg(musb, "Allow PM on possible host mode disconnect"); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); + musb->session = false; + return; + default: + break; + } + + /* No need to do anything if session has not changed */ + s = devctl & MUSB_DEVCTL_SESSION; + if (s == musb->session) + return; + + /* Block PM or allow PM? */ + if (s) { + musb_dbg(musb, "Block PM on active session: %02x", devctl); + error = pm_runtime_get_sync(musb->controller); + if (error < 0) + dev_err(musb->controller, "Could not enable: %i\n", + error); + } else { + musb_dbg(musb, "Allow PM with no session: %02x", devctl); + musb->quirk_invalid_vbus = false; + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); + } + + musb->session = s; +} + /* Only used to provide driver mode change events */ static void musb_irq_work(struct work_struct *data) { struct musb *musb = container_of(data, struct musb, irq_work); + musb_pm_runtime_check_session(musb); + if (musb->xceiv->otg->state != musb->xceiv_old_state) { musb->xceiv_old_state = musb->xceiv->otg->state; sysfs_notify(&musb->controller->kobj, NULL, "mode"); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index b55a776b03eb..2cb88a498f8a 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -378,6 +378,8 @@ struct musb { u8 min_power; /* vbus for periph, in mA/2 */ int port_mode; /* MUSB_PORT_MODE_* */ + bool session; + bool quirk_invalid_vbus; bool is_host; int a_wait_bcon; /* VBUS timeout in msecs */ diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 2537179636db..0f17d2140db6 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -145,43 +145,6 @@ static const struct debugfs_reg32 dsps_musb_regs[] = { { "mode", 0xe8 }, }; -static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) -{ - struct device *dev = musb->controller; - struct dsps_glue *glue = dev_get_drvdata(dev->parent); - - if (timeout == 0) - timeout = jiffies + msecs_to_jiffies(3); - - /* Never idle if active, or when VBUS timeout is not set as host */ - if (musb->is_active || (musb->a_wait_bcon == 0 && - musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) { - dev_dbg(musb->controller, "%s active, deleting timer\n", - usb_otg_state_string(musb->xceiv->otg->state)); - del_timer(&glue->timer); - glue->last_timer = jiffies; - return; - } - if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) - return; - - if (!musb->g.dev.driver) - return; - - if (time_after(glue->last_timer, timeout) && - timer_pending(&glue->timer)) { - dev_dbg(musb->controller, - "Longer idle timer already pending, ignoring...\n"); - return; - } - glue->last_timer = timeout; - - dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", - usb_otg_state_string(musb->xceiv->otg->state), - jiffies_to_msecs(timeout - jiffies)); - mod_timer(&glue->timer, timeout); -} - /** * dsps_musb_enable - enable interrupts */ @@ -206,7 +169,6 @@ static void dsps_musb_enable(struct musb *musb) musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout)); - dsps_musb_try_idle(musb, 0); } /** @@ -236,6 +198,11 @@ static void otg_timer(unsigned long _musb) u8 devctl; unsigned long flags; int skip_session = 0; + int err; + + err = pm_runtime_get_sync(dev); + if (err < 0) + dev_err(dev, "Poll could not pm_runtime_get: %i\n", err); /* * We poll because DSPS IP's won't expose several OTG-critical @@ -247,6 +214,10 @@ static void otg_timer(unsigned long _musb) spin_lock_irqsave(&musb->lock, flags); switch (musb->xceiv->otg->state) { + case OTG_STATE_A_WAIT_VRISE: + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); + break; case OTG_STATE_A_WAIT_BCON: musb_writeb(musb->mregs, MUSB_DEVCTL, 0); skip_session = 1; @@ -275,6 +246,9 @@ static void otg_timer(unsigned long _musb) break; } spin_unlock_irqrestore(&musb->lock, flags); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); } static irqreturn_t dsps_interrupt(int irq, void *hci) @@ -338,7 +312,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) MUSB_HST_MODE(musb); musb->xceiv->otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; - del_timer(&glue->timer); + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(wrp->poll_timeout)); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); @@ -358,11 +333,17 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) if (musb->int_tx || musb->int_rx || musb->int_usb) ret |= musb_interrupt(musb); - /* Poll for ID change in OTG port mode */ - if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && - musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) + /* Poll for ID change and connect */ + switch (musb->xceiv->otg->state) { + case OTG_STATE_B_IDLE: + case OTG_STATE_A_WAIT_BCON: mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout)); + break; + default: + break; + } + out: spin_unlock_irqrestore(&musb->lock, flags); @@ -461,6 +442,9 @@ static int dsps_musb_init(struct musb *musb) musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val); } + mod_timer(&glue->timer, jiffies + + msecs_to_jiffies(glue->wrp->poll_timeout)); + return dsps_musb_dbg_init(musb, glue); } @@ -620,7 +604,6 @@ static struct musb_platform_ops dsps_ops = { .enable = dsps_musb_enable, .disable = dsps_musb_disable, - .try_idle = dsps_musb_try_idle, .set_mode = dsps_musb_set_mode, .recover = dsps_musb_recover, }; @@ -784,6 +767,8 @@ static int dsps_probe(struct platform_device *pdev) platform_set_drvdata(pdev, glue); pm_runtime_enable(&pdev->dev); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 200); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) { @@ -795,11 +780,15 @@ static int dsps_probe(struct platform_device *pdev) if (ret) goto err3; + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + return 0; err3: - pm_runtime_put(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); err2: + pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_disable(&pdev->dev); return ret; } @@ -811,7 +800,8 @@ static int dsps_remove(struct platform_device *pdev) platform_device_unregister(glue->musb); /* disable usbss clocks */ - pm_runtime_put(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); return 0; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 6d1e975e9605..bff4869a57cd 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1964,6 +1964,9 @@ static int musb_gadget_stop(struct usb_gadget *g) * that currently misbehaves. */ + /* Force check of devctl register for PM runtime */ + schedule_work(&musb->irq_work); + pm_runtime_mark_last_busy(musb->controller); pm_runtime_put_autosuspend(musb->controller); diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index fe08e776fec3..61b5f1c3c5bc 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -245,6 +245,7 @@ void musb_root_disconnect(struct musb *musb) usb_otg_state_string(musb->xceiv->otg->state)); } } +EXPORT_SYMBOL_GPL(musb_root_disconnect); /*---------------------------------------------------------------------*/ diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 0b4cec940386..1ab6973d4f61 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -49,9 +49,6 @@ struct omap2430_glue { enum musb_vbus_id_status status; struct work_struct omap_musb_mailbox_work; struct device *control_otghs; - bool cable_connected; - bool enabled; - bool powered; }; #define glue_to_musb(g) platform_get_drvdata(g->musb) @@ -141,45 +138,6 @@ static inline void omap2430_low_level_init(struct musb *musb) musb_writel(musb->mregs, OTG_FORCESTDBY, l); } -/* - * We can get multiple cable events so we need to keep track - * of the power state. Only keep power enabled if USB cable is - * connected and a gadget is started. - */ -static void omap2430_set_power(struct musb *musb, bool enabled, bool cable) -{ - struct device *dev = musb->controller; - struct omap2430_glue *glue = dev_get_drvdata(dev->parent); - bool power_up; - int res; - - if (glue->enabled != enabled) - glue->enabled = enabled; - - if (glue->cable_connected != cable) - glue->cable_connected = cable; - - power_up = glue->enabled && glue->cable_connected; - if (power_up == glue->powered) { - dev_warn(musb->controller, "power state already %i\n", - power_up); - return; - } - - glue->powered = power_up; - - if (power_up) { - res = pm_runtime_get_sync(musb->controller); - if (res < 0) { - dev_err(musb->controller, "could not enable: %i", res); - glue->powered = false; - } - } else { - pm_runtime_mark_last_busy(musb->controller); - pm_runtime_put_autosuspend(musb->controller); - } -} - static int omap2430_musb_mailbox(enum musb_vbus_id_status status) { struct omap2430_glue *glue = _glue; @@ -203,21 +161,15 @@ static int omap2430_musb_mailbox(enum musb_vbus_id_status status) static void omap_musb_set_mailbox(struct omap2430_glue *glue) { struct musb *musb = glue_to_musb(glue); - struct device *dev = musb->controller; - struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); + struct musb_hdrc_platform_data *pdata = + dev_get_platdata(musb->controller); struct omap_musb_board_data *data = pdata->board_data; struct usb_otg *otg = musb->xceiv->otg; - bool cable_connected; - - cable_connected = ((glue->status == MUSB_ID_GROUND) || - (glue->status == MUSB_VBUS_VALID)); - - if (cable_connected) - omap2430_set_power(musb, glue->enabled, cable_connected); + pm_runtime_get_sync(musb->controller); switch (glue->status) { case MUSB_ID_GROUND: - dev_dbg(dev, "ID GND\n"); + dev_dbg(musb->controller, "ID GND\n"); otg->default_a = true; musb->xceiv->otg->state = OTG_STATE_A_IDLE; @@ -230,7 +182,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) break; case MUSB_VBUS_VALID: - dev_dbg(dev, "VBUS Connect\n"); + dev_dbg(musb->controller, "VBUS Connect\n"); otg->default_a = false; musb->xceiv->otg->state = OTG_STATE_B_IDLE; @@ -240,7 +192,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) case MUSB_ID_FLOAT: case MUSB_VBUS_OFF: - dev_dbg(dev, "VBUS Disconnect\n"); + dev_dbg(musb->controller, "VBUS Disconnect\n"); musb->xceiv->last_event = USB_EVENT_NONE; if (musb->gadget_driver) @@ -253,12 +205,10 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) USB_MODE_DISCONNECT); break; default: - dev_dbg(dev, "ID float\n"); + dev_dbg(musb->controller, "ID float\n"); } - - if (!cable_connected) - omap2430_set_power(musb, glue->enabled, cable_connected); - + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); atomic_notifier_call_chain(&musb->xceiv->notifier, musb->xceiv->last_event, NULL); } @@ -376,8 +326,6 @@ static void omap2430_musb_enable(struct musb *musb) if (!WARN_ON(!musb->phy)) phy_power_on(musb->phy); - omap2430_set_power(musb, true, glue->cable_connected); - switch (glue->status) { case MUSB_ID_GROUND: @@ -419,8 +367,6 @@ static void omap2430_musb_disable(struct musb *musb) if (glue->status != MUSB_UNKNOWN) omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DISCONNECT); - - omap2430_set_power(musb, false, glue->cable_connected); } static int omap2430_musb_exit(struct musb *musb) @@ -571,7 +517,7 @@ static int omap2430_probe(struct platform_device *pdev) pm_runtime_enable(glue->dev); pm_runtime_use_autosuspend(glue->dev); - pm_runtime_set_autosuspend_delay(glue->dev, 500); + pm_runtime_set_autosuspend_delay(glue->dev, 100); ret = platform_device_add(musb); if (ret) { @@ -591,11 +537,9 @@ err0: static int omap2430_remove(struct platform_device *pdev) { struct omap2430_glue *glue = platform_get_drvdata(pdev); - struct musb *musb = glue_to_musb(glue); pm_runtime_get_sync(glue->dev); platform_device_unregister(glue->musb); - omap2430_set_power(musb, false, false); pm_runtime_put_sync(glue->dev); pm_runtime_dont_use_autosuspend(glue->dev); pm_runtime_disable(glue->dev); diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index c6ee16660572..1408245be18e 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -74,6 +74,7 @@ #define SUNXI_MUSB_FL_HAS_SRAM 5 #define SUNXI_MUSB_FL_HAS_RESET 6 #define SUNXI_MUSB_FL_NO_CONFIGDATA 7 +#define SUNXI_MUSB_FL_PHY_MODE_PEND 8 /* Our read/write methods need access and do not get passed in a musb ref :| */ static struct musb *sunxi_musb; @@ -87,6 +88,7 @@ struct sunxi_glue { struct phy *phy; struct platform_device *usb_phy; struct usb_phy *xceiv; + enum phy_mode phy_mode; unsigned long flags; struct work_struct work; struct extcon_dev *extcon; @@ -140,6 +142,9 @@ static void sunxi_musb_work(struct work_struct *work) clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); } } + + if (test_and_clear_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags)) + phy_set_mode(glue->phy, glue->phy_mode); } static void sunxi_musb_set_vbus(struct musb *musb, int is_on) @@ -341,6 +346,50 @@ static void sunxi_musb_dma_controller_destroy(struct dma_controller *c) { } +static int sunxi_musb_set_mode(struct musb *musb, u8 mode) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + enum phy_mode new_mode; + + switch (mode) { + case MUSB_HOST: + new_mode = PHY_MODE_USB_HOST; + break; + case MUSB_PERIPHERAL: + new_mode = PHY_MODE_USB_DEVICE; + break; + case MUSB_OTG: + new_mode = PHY_MODE_USB_OTG; + break; + default: + dev_err(musb->controller->parent, + "Error requested mode not supported by this kernel\n"); + return -EINVAL; + } + + if (glue->phy_mode == new_mode) + return 0; + + if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) { + dev_err(musb->controller->parent, + "Error changing modes is only supported in dual role mode\n"); + return -EINVAL; + } + + if (musb->port1_status & USB_PORT_STAT_ENABLE) + musb_root_disconnect(musb); + + /* + * phy_set_mode may sleep, and we're called with a spinlock held, + * so let sunxi_musb_work deal with it. + */ + glue->phy_mode = new_mode; + set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags); + schedule_work(&glue->work); + + return 0; +} + /* * sunxi musb register layout * 0x00 - 0x17 fifo regs, 1 long per fifo @@ -568,6 +617,7 @@ static const struct musb_platform_ops sunxi_musb_ops = { .writew = sunxi_musb_writew, .dma_init = sunxi_musb_dma_controller_create, .dma_exit = sunxi_musb_dma_controller_destroy, + .set_mode = sunxi_musb_set_mode, .set_vbus = sunxi_musb_set_vbus, .pre_root_reset_end = sunxi_musb_pre_root_reset_end, .post_root_reset_end = sunxi_musb_post_root_reset_end, @@ -614,21 +664,28 @@ static int sunxi_musb_probe(struct platform_device *pdev) return -EINVAL; } + glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + memset(&pdata, 0, sizeof(pdata)); switch (usb_get_dr_mode(&pdev->dev)) { #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST case USB_DR_MODE_HOST: pdata.mode = MUSB_PORT_MODE_HOST; + glue->phy_mode = PHY_MODE_USB_HOST; break; #endif #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET case USB_DR_MODE_PERIPHERAL: pdata.mode = MUSB_PORT_MODE_GADGET; + glue->phy_mode = PHY_MODE_USB_DEVICE; break; #endif #ifdef CONFIG_USB_MUSB_DUAL_ROLE case USB_DR_MODE_OTG: pdata.mode = MUSB_PORT_MODE_DUAL_ROLE; + glue->phy_mode = PHY_MODE_USB_OTG; break; #endif default: @@ -638,10 +695,6 @@ static int sunxi_musb_probe(struct platform_device *pdev) pdata.platform_ops = &sunxi_musb_ops; pdata.config = &sunxi_musb_hdrc_config; - glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); - if (!glue) - return -ENOMEM; - glue->dev = &pdev->dev; INIT_WORK(&glue->work, sunxi_musb_work); glue->host_nb.notifier_call = sunxi_musb_host_notifier; diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 0c912d3950a5..a03caf4b1327 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -1248,7 +1248,7 @@ static void ab8500_usb_set_ab8500_tuning_values(struct ab8500_usb *ab) err = abx500_set_register_interruptible(ab->dev, AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78); if (err < 0) - dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n", + dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n", err); /* Switch to normal mode/disable Bank 0x12 access */ @@ -1290,7 +1290,7 @@ static void ab8500_usb_set_ab8505_tuning_values(struct ab8500_usb *ab) 0xFC, 0x80); if (err < 0) - dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n", + dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n", err); /* Switch to normal mode/disable Bank 0x12 access */ @@ -1321,7 +1321,7 @@ static void ab8500_usb_set_ab8540_tuning_values(struct ab8500_usb *ab) err = abx500_set_register_interruptible(ab->dev, AB8540_DEBUG, AB8500_USB_PHY_TUNE3, 0x90); if (err < 0) - dev_err(ab->dev, "Failed to set PHY_TUNE3 regester ret=%d\n", + dev_err(ab->dev, "Failed to set PHY_TUNE3 register ret=%d\n", err); } @@ -1351,7 +1351,7 @@ static void ab8500_usb_set_ab9540_tuning_values(struct ab8500_usb *ab) err = abx500_set_register_interruptible(ab->dev, AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x80); if (err < 0) - dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n", + dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n", err); /* Switch to normal mode/disable Bank 0x12 access */ diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 427efb5eebae..8311ba2968cd 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -118,8 +118,6 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) status = USB_EVENT_VBUS; otg->state = OTG_STATE_B_PERIPHERAL; nop->phy.last_event = status; - if (otg->gadget) - usb_gadget_vbus_connect(otg->gadget); /* drawing a "unit load" is *always* OK, except for OTG */ nop_set_vbus_draw(nop, 100); @@ -129,8 +127,6 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) } else { nop_set_vbus_draw(nop, 0); - if (otg->gadget) - usb_gadget_vbus_disconnect(otg->gadget); status = USB_EVENT_NONE; otg->state = OTG_STATE_B_IDLE; nop->phy.last_event = status; @@ -191,7 +187,8 @@ static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) otg->gadget = gadget; if (otg->state == OTG_STATE_B_PERIPHERAL) - usb_gadget_vbus_connect(gadget); + atomic_notifier_call_chain(&otg->usb_phy->notifier, + USB_EVENT_VBUS, otg->gadget); else otg->state = OTG_STATE_B_IDLE; return 0; @@ -326,6 +323,8 @@ static int usb_phy_generic_probe(struct platform_device *pdev) gpiod_to_irq(nop->gpiod_vbus), err); return err; } + nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ? + OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE; } nop->phy.init = usb_gen_phy_init; diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 00bfea01be65..0e2f1a36d315 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -27,6 +27,7 @@ #define DRIVER_NAME "mxs_phy" #define HW_USBPHY_PWD 0x00 +#define HW_USBPHY_TX 0x10 #define HW_USBPHY_CTRL 0x30 #define HW_USBPHY_CTRL_SET 0x34 #define HW_USBPHY_CTRL_CLR 0x38 @@ -38,6 +39,10 @@ #define HW_USBPHY_IP_SET 0x94 #define HW_USBPHY_IP_CLR 0x98 +#define GM_USBPHY_TX_TXCAL45DP(x) (((x) & 0xf) << 16) +#define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8) +#define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0) + #define BM_USBPHY_CTRL_SFTRST BIT(31) #define BM_USBPHY_CTRL_CLKGATE BIT(30) #define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27) @@ -115,6 +120,12 @@ */ #define MXS_PHY_NEED_IP_FIX BIT(3) +/* Minimum and maximum values for device tree entries */ +#define MXS_PHY_TX_CAL45_MIN 30 +#define MXS_PHY_TX_CAL45_MAX 55 +#define MXS_PHY_TX_D_CAL_MIN 79 +#define MXS_PHY_TX_D_CAL_MAX 119 + struct mxs_phy_data { unsigned int flags; }; @@ -164,6 +175,8 @@ struct mxs_phy { const struct mxs_phy_data *data; struct regmap *regmap_anatop; int port_id; + u32 tx_reg_set; + u32 tx_reg_mask; }; static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy) @@ -185,6 +198,20 @@ static void mxs_phy_clock_switch_delay(void) usleep_range(300, 400); } +static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) +{ + void __iomem *base = mxs_phy->phy.io_priv; + u32 phytx; + + /* Update TX register if there is anything to write */ + if (mxs_phy->tx_reg_mask) { + phytx = readl(base + HW_USBPHY_TX); + phytx &= ~mxs_phy->tx_reg_mask; + phytx |= mxs_phy->tx_reg_set; + writel(phytx, base + HW_USBPHY_TX); + } +} + static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { int ret; @@ -214,6 +241,8 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX) writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET); + mxs_phy_tx_init(mxs_phy); + return 0; } @@ -459,6 +488,7 @@ static int mxs_phy_probe(struct platform_device *pdev) int ret; const struct of_device_id *of_id; struct device_node *np = pdev->dev.of_node; + u32 val; of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev); if (!of_id) @@ -491,6 +521,37 @@ static int mxs_phy_probe(struct platform_device *pdev) } } + /* Precompute which bits of the TX register are to be updated, if any */ + if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) && + val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) { + /* Scale to a 4-bit value */ + val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF + / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN); + mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DN(~0); + mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DN(val); + } + + if (!of_property_read_u32(np, "fsl,tx-cal-45-dp-ohms", &val) && + val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) { + /* Scale to a 4-bit value. */ + val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF + / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN); + mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DP(~0); + mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DP(val); + } + + if (!of_property_read_u32(np, "fsl,tx-d-cal", &val) && + val >= MXS_PHY_TX_D_CAL_MIN && val <= MXS_PHY_TX_D_CAL_MAX) { + /* Scale to a 4-bit value. Round up the values and heavily + * weight the rounding by adding 2/3 of the denominator. + */ + val = ((MXS_PHY_TX_D_CAL_MAX - val) * 0xF + + (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN) * 2/3) + / (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN); + mxs_phy->tx_reg_mask |= GM_USBPHY_TX_D_CAL(~0); + mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val); + } + ret = of_alias_get_id(np, "usbphy"); if (ret < 0) dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret); diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index ac67bab9124c..012a37aa3e0d 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -482,6 +482,10 @@ static const struct of_device_id usbhs_of_match[] = { .data = (void *)USBHS_TYPE_RCAR_GEN3, }, { + .compatible = "renesas,usbhs-r8a7796", + .data = (void *)USBHS_TYPE_RCAR_GEN3, + }, + { .compatible = "renesas,rcar-gen2-usbhs", .data = (void *)USBHS_TYPE_RCAR_GEN2, }, diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index c4c64740a3e7..5bc7a6138855 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -335,7 +335,6 @@ static void __usbhsg_recip_send_status(struct usbhsg_gpriv *gpriv, buf = kmalloc(sizeof(*buf), GFP_ATOMIC); if (!buf) { usb_ep_free_request(&dcp->ep, req); - dev_err(dev, "recip data allocation fail\n"); return; } @@ -1062,14 +1061,11 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) int ret; gpriv = kzalloc(sizeof(struct usbhsg_gpriv), GFP_KERNEL); - if (!gpriv) { - dev_err(dev, "Could not allocate gadget priv\n"); + if (!gpriv) return -ENOMEM; - } uep = kzalloc(sizeof(struct usbhsg_uep) * pipe_size, GFP_KERNEL); if (!uep) { - dev_err(dev, "Could not allocate ep\n"); ret = -ENOMEM; goto usbhs_mod_gadget_probe_err_gpriv; } @@ -1106,6 +1102,8 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) gpriv->gadget.name = "renesas_usbhs_udc"; gpriv->gadget.ops = &usbhsg_gadget_ops; gpriv->gadget.max_speed = USB_SPEED_HIGH; + gpriv->gadget.quirk_avoids_skb_reserve = usbhs_get_dparam(priv, + has_usb_dmac); INIT_LIST_HEAD(&gpriv->gadget.ep_list); diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index 3bf0b72eb359..165e81bfd93a 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -166,14 +166,10 @@ static struct usbhsh_request *usbhsh_ureq_alloc(struct usbhsh_hpriv *hpriv, gfp_t mem_flags) { struct usbhsh_request *ureq; - struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); - struct device *dev = usbhs_priv_to_dev(priv); ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags); - if (!ureq) { - dev_err(dev, "ureq alloc fail\n"); + if (!ureq) return NULL; - } usbhs_pkt_init(&ureq->pkt); ureq->urb = urb; @@ -388,10 +384,8 @@ static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv, unsigned long flags; uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags); - if (!uep) { - dev_err(dev, "usbhsh_ep alloc fail\n"); + if (!uep) return -ENOMEM; - } /******************** spin lock ********************/ usbhs_lock(priv, flags); diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c index c238772b9e9e..9396a8c14af8 100644 --- a/drivers/usb/renesas_usbhs/pipe.c +++ b/drivers/usb/renesas_usbhs/pipe.c @@ -804,10 +804,8 @@ int usbhs_pipe_probe(struct usbhs_priv *priv) } info->pipe = kzalloc(sizeof(struct usbhs_pipe) * pipe_size, GFP_KERNEL); - if (!info->pipe) { - dev_err(dev, "Could not allocate pipe\n"); + if (!info->pipe) return -ENOMEM; - } info->size = pipe_size; diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 4d6a5c672a3d..54a4de0efdba 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ + { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 4f7e072e4e00..e49ad0c63ad8 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -30,12 +30,12 @@ #include <linux/usb/ezusb.h> /* make a simple define to handle if we are compiling keyspan_pda or xircom support */ -#if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE) +#if IS_ENABLED(CONFIG_USB_SERIAL_KEYSPAN_PDA) #define KEYSPAN #else #undef KEYSPAN #endif -#if defined(CONFIG_USB_SERIAL_XIRCOM) || defined(CONFIG_USB_SERIAL_XIRCOM_MODULE) +#if IS_ENABLED(CONFIG_USB_SERIAL_XIRCOM) #define XIRCOM #else #undef XIRCOM diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 07b4bf01061d..a8b9bdba314f 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -179,23 +179,23 @@ /* Config struct */ struct ti_uart_config { - __u16 wBaudRate; - __u16 wFlags; - __u8 bDataBits; - __u8 bParity; - __u8 bStopBits; + __be16 wBaudRate; + __be16 wFlags; + u8 bDataBits; + u8 bParity; + u8 bStopBits; char cXon; char cXoff; - __u8 bUartMode; + u8 bUartMode; } __packed; /* Get port status */ struct ti_port_status { - __u8 bCmdCode; - __u8 bModuleId; - __u8 bErrorCode; - __u8 bMSR; - __u8 bLSR; + u8 bCmdCode; + u8 bModuleId; + u8 bErrorCode; + u8 bMSR; + u8 bLSR; } __packed; /* Purge modes */ @@ -218,12 +218,12 @@ struct ti_port_status { #define TI_RW_DATA_DOUBLE_WORD 0x04 struct ti_write_data_bytes { - __u8 bAddrType; - __u8 bDataType; - __u8 bDataCounter; + u8 bAddrType; + u8 bDataType; + u8 bDataCounter; __be16 wBaseAddrHi; __be16 wBaseAddrLo; - __u8 bData[0]; + u8 bData[0]; } __packed; struct ti_read_data_request { @@ -258,7 +258,7 @@ struct ti_interrupt { /* Firmware image header */ struct ti_firmware_header { __le16 wLength; - __u8 bCheckSum; + u8 bCheckSum; } __packed; /* UART addresses */ @@ -276,9 +276,6 @@ struct ti_firmware_header { #define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */ -/* supported setserial flags */ -#define TI_SET_SERIAL_FLAGS 0 - /* read urb states */ #define TI_READ_URB_RUNNING 0 #define TI_READ_URB_STOPPING 1 @@ -288,11 +285,10 @@ struct ti_firmware_header { struct ti_port { int tp_is_open; - __u8 tp_msr; - __u8 tp_shadow_mcr; - __u8 tp_uart_mode; /* 232 or 485 modes */ + u8 tp_msr; + u8 tp_shadow_mcr; + u8 tp_uart_mode; /* 232 or 485 modes */ unsigned int tp_uart_base_addr; - int tp_flags; struct ti_device *tp_tdev; struct usb_serial_port *tp_port; spinlock_t tp_lock; @@ -306,7 +302,6 @@ struct ti_device { struct usb_serial *td_serial; int td_is_3410; bool td_rs485_only; - int td_urb_error; }; static int ti_startup(struct usb_serial *serial); @@ -343,7 +338,7 @@ static int ti_get_serial_info(struct ti_port *tport, struct serial_struct __user *ret_arg); static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, struct serial_struct __user *new_arg); -static void ti_handle_new_msr(struct ti_port *tport, __u8 msr); +static void ti_handle_new_msr(struct ti_port *tport, u8 msr); static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty); static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty); @@ -354,7 +349,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command, __u16 moduleid, __u16 value, __u8 *data, int size); static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev, - unsigned long addr, __u8 mask, __u8 byte); + unsigned long addr, u8 mask, u8 byte); static int ti_download_firmware(struct ti_device *tdev); @@ -647,12 +642,11 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) struct urb *urb; int port_number; int status; - __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINUOUS | - TI_PIPE_TIMEOUT_ENABLE | - (TI_TRANSFER_TIMEOUT << 2)); + u16 open_settings; - if (tport == NULL) - return -ENODEV; + open_settings = (TI_PIPE_MODE_CONTINUOUS | + TI_PIPE_TIMEOUT_ENABLE | + (TI_TRANSFER_TIMEOUT << 2)); dev = port->serial->dev; tdev = tport->tp_tdev; @@ -686,7 +680,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) if (tty) ti_set_termios(tty, port, &tty->termios); - dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { @@ -695,7 +688,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) goto unlink_int_urb; } - dev_dbg(&port->dev, "%s - sending TI_START_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { @@ -704,7 +696,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) goto unlink_int_urb; } - dev_dbg(&port->dev, "%s - sending TI_PURGE_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_PURGE_PORT, (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0); if (status) { @@ -728,7 +719,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) if (tty) ti_set_termios(tty, port, &tty->termios); - dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT (2)\n", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { @@ -737,7 +727,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) goto unlink_int_urb; } - dev_dbg(&port->dev, "%s - sending TI_START_PORT (2)\n", __func__); status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { @@ -747,7 +736,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) } /* start read urb */ - dev_dbg(&port->dev, "%s - start read urb\n", __func__); urb = port->read_urb; if (!urb) { dev_err(&port->dev, "%s - no read urb\n", __func__); @@ -773,7 +761,6 @@ unlink_int_urb: usb_kill_urb(port->serial->port[0]->interrupt_in_urb); release_lock: mutex_unlock(&tdev->td_open_close_lock); - dev_dbg(&port->dev, "%s - exit %d\n", __func__, status); return status; } @@ -789,8 +776,6 @@ static void ti_close(struct usb_serial_port *port) tdev = usb_get_serial_data(port->serial); tport = usb_get_serial_port_data(port); - if (tdev == NULL || tport == NULL) - return; tport->tp_is_open = 0; @@ -803,7 +788,6 @@ static void ti_close(struct usb_serial_port *port) port_number = port->port_number; - dev_dbg(&port->dev, "%s - sending TI_CLOSE_PORT\n", __func__); status = ti_command_out_sync(tdev, TI_CLOSE_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) @@ -830,11 +814,10 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, struct ti_port *tport = usb_get_serial_port_data(port); if (count == 0) { - dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } - if (tport == NULL || !tport->tp_is_open) + if (!tport->tp_is_open) return -ENODEV; count = kfifo_in_locked(&port->write_fifo, data, count, @@ -852,9 +835,6 @@ static int ti_write_room(struct tty_struct *tty) int room = 0; unsigned long flags; - if (tport == NULL) - return 0; - spin_lock_irqsave(&tport->tp_lock, flags); room = kfifo_avail(&port->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); @@ -871,9 +851,6 @@ static int ti_chars_in_buffer(struct tty_struct *tty) int chars = 0; unsigned long flags; - if (tport == NULL) - return 0; - spin_lock_irqsave(&tport->tp_lock, flags); chars = kfifo_len(&port->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); @@ -900,9 +877,6 @@ static void ti_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); - if (tport == NULL) - return; - if (I_IXOFF(tty) || C_CRTSCTS(tty)) ti_stop_read(tport, tty); @@ -915,9 +889,6 @@ static void ti_unthrottle(struct tty_struct *tty) struct ti_port *tport = usb_get_serial_port_data(port); int status; - if (tport == NULL) - return; - if (I_IXOFF(tty) || C_CRTSCTS(tty)) { status = ti_restart_read(tport, tty); if (status) @@ -932,16 +903,11 @@ static int ti_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); - if (tport == NULL) - return -ENODEV; - switch (cmd) { case TIOCGSERIAL: - dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); return ti_get_serial_info(tport, (struct serial_struct __user *)arg); case TIOCSSERIAL: - dev_dbg(&port->dev, "%s - TIOCSSERIAL\n", __func__); return ti_set_serial_info(tty, tport, (struct serial_struct __user *)arg); } @@ -959,6 +925,8 @@ static void ti_set_termios(struct tty_struct *tty, int status; int port_number = port->port_number; unsigned int mcr; + u16 wbaudrate; + u16 wflags = 0; cflag = tty->termios.c_cflag; iflag = tty->termios.c_iflag; @@ -967,21 +935,16 @@ static void ti_set_termios(struct tty_struct *tty, dev_dbg(&port->dev, "%s - old clfag %08x, old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag); - if (tport == NULL) - return; - config = kmalloc(sizeof(*config), GFP_KERNEL); if (!config) return; - config->wFlags = 0; - /* these flags must be set */ - config->wFlags |= TI_UART_ENABLE_MS_INTS; - config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA; - config->bUartMode = (__u8)(tport->tp_uart_mode); + wflags |= TI_UART_ENABLE_MS_INTS; + wflags |= TI_UART_ENABLE_AUTO_START_DMA; + config->bUartMode = tport->tp_uart_mode; - switch (cflag & CSIZE) { + switch (C_CSIZE(tty)) { case CS5: config->bDataBits = TI_UART_5_DATA_BITS; break; @@ -1000,29 +963,29 @@ static void ti_set_termios(struct tty_struct *tty, /* CMSPAR isn't supported by this driver */ tty->termios.c_cflag &= ~CMSPAR; - if (cflag & PARENB) { - if (cflag & PARODD) { - config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING; + if (C_PARENB(tty)) { + if (C_PARODD(tty)) { + wflags |= TI_UART_ENABLE_PARITY_CHECKING; config->bParity = TI_UART_ODD_PARITY; } else { - config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING; + wflags |= TI_UART_ENABLE_PARITY_CHECKING; config->bParity = TI_UART_EVEN_PARITY; } } else { - config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING; + wflags &= ~TI_UART_ENABLE_PARITY_CHECKING; config->bParity = TI_UART_NO_PARITY; } - if (cflag & CSTOPB) + if (C_CSTOPB(tty)) config->bStopBits = TI_UART_2_STOP_BITS; else config->bStopBits = TI_UART_1_STOP_BITS; - if (cflag & CRTSCTS) { + if (C_CRTSCTS(tty)) { /* RTS flow control must be off to drop RTS for baud rate B0 */ - if ((cflag & CBAUD) != B0) - config->wFlags |= TI_UART_ENABLE_RTS_IN; - config->wFlags |= TI_UART_ENABLE_CTS_OUT; + if ((C_BAUD(tty)) != B0) + wflags |= TI_UART_ENABLE_RTS_IN; + wflags |= TI_UART_ENABLE_CTS_OUT; } else { ti_restart_read(tport, tty); } @@ -1032,34 +995,34 @@ static void ti_set_termios(struct tty_struct *tty, config->cXoff = STOP_CHAR(tty); if (I_IXOFF(tty)) - config->wFlags |= TI_UART_ENABLE_X_IN; + wflags |= TI_UART_ENABLE_X_IN; else ti_restart_read(tport, tty); if (I_IXON(tty)) - config->wFlags |= TI_UART_ENABLE_X_OUT; + wflags |= TI_UART_ENABLE_X_OUT; } baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; if (tport->tp_tdev->td_is_3410) - config->wBaudRate = (__u16)((923077 + baud/2) / baud); + wbaudrate = (923077 + baud/2) / baud; else - config->wBaudRate = (__u16)((461538 + baud/2) / baud); + wbaudrate = (461538 + baud/2) / baud; /* FIXME: Should calculate resulting baud here and report it back */ - if ((cflag & CBAUD) != B0) + if ((C_BAUD(tty)) != B0) tty_encode_baud_rate(tty, baud, baud); dev_dbg(&port->dev, "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n", - __func__, baud, config->wBaudRate, config->wFlags, + __func__, baud, wbaudrate, wflags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode); - cpu_to_be16s(&config->wBaudRate); - cpu_to_be16s(&config->wFlags); + config->wBaudRate = cpu_to_be16(wbaudrate); + config->wFlags = cpu_to_be16(wflags); status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG, (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config, @@ -1071,7 +1034,7 @@ static void ti_set_termios(struct tty_struct *tty, /* SET_CONFIG asserts RTS and DTR, reset them correctly */ mcr = tport->tp_shadow_mcr; /* if baud rate is B0, clear RTS and DTR */ - if ((cflag & CBAUD) == B0) + if (C_BAUD(tty) == B0) mcr &= ~(TI_MCR_DTR | TI_MCR_RTS); status = ti_set_mcr(tport, mcr); if (status) @@ -1092,9 +1055,6 @@ static int ti_tiocmget(struct tty_struct *tty) unsigned int mcr; unsigned long flags; - if (tport == NULL) - return -ENODEV; - spin_lock_irqsave(&tport->tp_lock, flags); msr = tport->tp_msr; mcr = tport->tp_shadow_mcr; @@ -1122,9 +1082,6 @@ static int ti_tiocmset(struct tty_struct *tty, unsigned int mcr; unsigned long flags; - if (tport == NULL) - return -ENODEV; - spin_lock_irqsave(&tport->tp_lock, flags); mcr = tport->tp_shadow_mcr; @@ -1155,9 +1112,6 @@ static void ti_break(struct tty_struct *tty, int break_state) dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state); - if (tport == NULL) - return; - status = ti_write_byte(port, tport->tp_tdev, tport->tp_uart_base_addr + TI_UART_OFFSET_LCR, TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0); @@ -1189,7 +1143,7 @@ static void ti_interrupt_callback(struct urb *urb) int function; int status = urb->status; int retval; - __u8 msr; + u8 msr; switch (status) { case 0: @@ -1198,11 +1152,9 @@ static void ti_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status); - tdev->td_urb_error = 1; return; default: dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status); - tdev->td_urb_error = 1; goto exit; } @@ -1275,12 +1227,10 @@ static void ti_bulk_in_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status); - tport->tp_tdev->td_urb_error = 1; return; default: dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status); - tport->tp_tdev->td_urb_error = 1; } if (status == -EPIPE) @@ -1335,12 +1285,10 @@ static void ti_bulk_out_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status); - tport->tp_tdev->td_urb_error = 1; return; default: dev_err_console(port, "%s - nonzero urb status, %d\n", __func__, status); - tport->tp_tdev->td_urb_error = 1; } /* send any buffered data */ @@ -1490,7 +1438,6 @@ static int ti_get_serial_info(struct ti_port *tport, ret_serial.type = PORT_16550A; ret_serial.line = port->minor; ret_serial.port = port->port_number; - ret_serial.flags = tport->tp_flags; ret_serial.xmit_fifo_size = kfifo_size(&port->write_fifo); ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800; ret_serial.closing_wait = cwait; @@ -1515,14 +1462,13 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, if (cwait != ASYNC_CLOSING_WAIT_NONE) cwait = msecs_to_jiffies(10 * new_serial.closing_wait); - tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; tport->tp_port->port.closing_wait = cwait; return 0; } -static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) +static void ti_handle_new_msr(struct ti_port *tport, u8 msr) { struct async_icount *icount; struct tty_struct *tty; @@ -1634,8 +1580,8 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command, static int ti_write_byte(struct usb_serial_port *port, - struct ti_device *tdev, unsigned long addr, - __u8 mask, __u8 byte) + struct ti_device *tdev, unsigned long addr, + u8 mask, u8 byte) { int status; unsigned int size; @@ -1679,11 +1625,10 @@ static int ti_do_download(struct usb_device *dev, int pipe, int len; for (pos = sizeof(struct ti_firmware_header); pos < size; pos++) - cs = (__u8)(cs + buffer[pos]); + cs = (u8)(cs + buffer[pos]); header = (struct ti_firmware_header *)buffer; - header->wLength = cpu_to_le16((__u16)(size - - sizeof(struct ti_firmware_header))); + header->wLength = cpu_to_le16(size - sizeof(*header)); header->bCheckSum = cs; dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__); @@ -1701,7 +1646,7 @@ static int ti_download_firmware(struct ti_device *tdev) { int status; int buffer_size; - __u8 *buffer; + u8 *buffer; struct usb_device *dev = tdev->td_serial->dev; unsigned int pipe = usb_sndbulkpipe(dev, tdev->td_serial->port[0]->bulk_out_endpointAddress); diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index 1d8b03c81030..878b4b8761f5 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -939,10 +939,8 @@ static int alauda_read_data(struct us_data *us, unsigned long address, len = min(sectors, blocksize) * (pagesize + 64); buffer = kmalloc(len, GFP_NOIO); - if (buffer == NULL) { - printk(KERN_WARNING "alauda_read_data: Out of memory\n"); + if (!buffer) return USB_STOR_TRANSPORT_ERROR; - } /* Figure out the initial LBA and page */ lba = address >> blockshift; @@ -1033,18 +1031,15 @@ static int alauda_write_data(struct us_data *us, unsigned long address, len = min(sectors, blocksize) * pagesize; buffer = kmalloc(len, GFP_NOIO); - if (buffer == NULL) { - printk(KERN_WARNING "alauda_write_data: Out of memory\n"); + if (!buffer) return USB_STOR_TRANSPORT_ERROR; - } /* * We also need a temporary block buffer, where we read in the old data, * overwrite parts with the new data, and manipulate the redundancy data */ blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO); - if (blockbuffer == NULL) { - printk(KERN_WARNING "alauda_write_data: Out of memory\n"); + if (!blockbuffer) { kfree(buffer); return USB_STOR_TRANSPORT_ERROR; } diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 33eb923df892..8cd2926fb1fe 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -296,6 +296,14 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_BROKEN_FUA) sdev->broken_fua = 1; + /* Some even totally fail to indicate a cache */ + if (us->fflags & US_FL_ALWAYS_SYNC) { + /* don't read caching information */ + sdev->skip_ms_page_8 = 1; + sdev->skip_ms_page_3f = 1; + /* assume sync is needed */ + sdev->wce_default_on = 1; + } } else { /* diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index c5797fa2125e..3aeaa536c44f 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -766,10 +766,8 @@ sddr09_read_data(struct us_data *us, len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; buffer = kmalloc(len, GFP_NOIO); - if (buffer == NULL) { - printk(KERN_WARNING "sddr09_read_data: Out of memory\n"); + if (!buffer) return -ENOMEM; - } // This could be made much more efficient by checking for // contiguous LBA's. Another exercise left to the student. @@ -1004,10 +1002,8 @@ sddr09_write_data(struct us_data *us, pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT); blocklen = (pagelen << info->blockshift); blockbuffer = kmalloc(blocklen, GFP_NOIO); - if (!blockbuffer) { - printk(KERN_WARNING "sddr09_write_data: Out of memory\n"); + if (!blockbuffer) return -ENOMEM; - } /* * Since we don't write the user data directly to the device, @@ -1017,8 +1013,7 @@ sddr09_write_data(struct us_data *us, len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; buffer = kmalloc(len, GFP_NOIO); - if (buffer == NULL) { - printk(KERN_WARNING "sddr09_write_data: Out of memory\n"); + if (!buffer) { kfree(blockbuffer); return -ENOMEM; } @@ -1241,8 +1236,7 @@ sddr09_read_map(struct us_data *us) { alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT); alloc_len = (alloc_blocks << CONTROL_SHIFT); buffer = kmalloc(alloc_len, GFP_NOIO); - if (buffer == NULL) { - printk(KERN_WARNING "sddr09_read_map: out of memory\n"); + if (!buffer) { result = -1; goto done; } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index aa3539238848..af3c7eecff91 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -338,6 +338,13 @@ UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_WP_DETECT), +/* Reported by Egbert Eich <eich@suse.com> */ +UNUSUAL_DEV( 0x0480, 0xd010, 0x0100, 0x9999, + "Toshiba", + "External USB 3.0", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_ALWAYS_SYNC), + /* Patch submitted by Philipp Friedrich <philipp@void.at> */ UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, "Kyocera", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index ef2d8cde6ef7..2cba13a532cd 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -498,7 +498,8 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 | US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE | US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES | - US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS); + US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS | + US_FL_ALWAYS_SYNC); p = quirks; while (*p) { @@ -581,6 +582,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) case 'w': f |= US_FL_NO_WP_DETECT; break; + case 'y': + f |= US_FL_ALWAYS_SYNC; + break; /* Ignore unrecognized flag characters */ } } @@ -794,10 +798,8 @@ static int usb_stor_acquire_resources(struct us_data *us) struct task_struct *th; us->current_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!us->current_urb) { - usb_stor_dbg(us, "URB allocation failed\n"); + if (!us->current_urb) return -ENOMEM; - } /* * Just before we start our control thread, initialize @@ -1070,17 +1072,17 @@ int usb_stor_probe2(struct us_data *us) result = usb_stor_acquire_resources(us); if (result) goto BadDevice; + usb_autopm_get_interface_no_resume(us->pusb_intf); snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s", dev_name(&us->pusb_intf->dev)); result = scsi_add_host(us_to_host(us), dev); if (result) { dev_warn(dev, "Unable to add the scsi host\n"); - goto BadDevice; + goto HostAddErr; } /* Submit the delayed_work for SCSI-device scanning */ - usb_autopm_get_interface_no_resume(us->pusb_intf); set_bit(US_FLIDX_SCAN_PENDING, &us->dflags); if (delay_use > 0) @@ -1090,6 +1092,8 @@ int usb_stor_probe2(struct us_data *us) return 0; /* We come here if there are any problems */ +HostAddErr: + usb_autopm_put_interface_no_suspend(us->pusb_intf); BadDevice: usb_stor_dbg(us, "storage_probe() failed\n"); release_everything(us); diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 545d09b8081d..5133a0792eb0 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -499,10 +499,8 @@ static int skel_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - dev_err(&interface->dev, "Out of memory\n"); + if (!dev) goto error; - } kref_init(&dev->kref); sema_init(&dev->limit_sem, WRITES_IN_FLIGHT); mutex_init(&dev->io_mutex); @@ -526,17 +524,11 @@ static int skel_probe(struct usb_interface *interface, dev->bulk_in_size = buffer_size; dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!dev->bulk_in_buffer) { - dev_err(&interface->dev, - "Could not allocate bulk_in_buffer\n"); + if (!dev->bulk_in_buffer) goto error; - } dev->bulk_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->bulk_in_urb) { - dev_err(&interface->dev, - "Could not allocate bulk_in_urb\n"); + if (!dev->bulk_in_urb) goto error; - } } if (!dev->bulk_out_endpointAddr && diff --git a/drivers/usb/usbip/Kconfig b/drivers/usb/usbip/Kconfig index 17646b25343f..eeefa29f8aa2 100644 --- a/drivers/usb/usbip/Kconfig +++ b/drivers/usb/usbip/Kconfig @@ -1,6 +1,7 @@ config USBIP_CORE tristate "USB/IP support" - depends on USB_COMMON && NET + depends on NET + select USB_COMMON ---help--- This enables pushing USB packets over IP to allow remote machines direct access to USB devices. It provides the @@ -24,6 +25,27 @@ config USBIP_VHCI_HCD To compile this driver as a module, choose M here: the module will be called vhci-hcd. +config USBIP_VHCI_HC_PORTS + int "Number of ports per USB/IP virtual host controller" + range 1 31 + default 8 + depends on USBIP_VHCI_HCD + ---help--- + To increase number of ports available for USB/IP virtual + host controller driver, this defines number of ports per + USB/IP virtual host controller. + +config USBIP_VHCI_NR_HCS + int "Number of USB/IP virtual host controllers" + range 1 128 + default 1 + depends on USBIP_VHCI_HCD + ---help--- + To increase number of ports available for USB/IP virtual + host controller driver, this defines number of USB/IP + virtual host controllers as if adding physical host + controllers. + config USBIP_HOST tristate "Host driver" depends on USBIP_CORE && USB diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 2df63e305722..191b176ffedf 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -461,7 +461,6 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, priv->urb = usb_alloc_urb(0, GFP_KERNEL); if (!priv->urb) { - dev_err(&udev->dev, "malloc urb\n"); usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); return; } diff --git a/drivers/usb/usbip/vhci.h b/drivers/usb/usbip/vhci.h index a863a98a91ce..88b71c4e068f 100644 --- a/drivers/usb/usbip/vhci.h +++ b/drivers/usb/usbip/vhci.h @@ -1,5 +1,6 @@ /* * Copyright (C) 2003-2008 Takahiro Hirofuchi + * Copyright (C) 2015 Nobuo Iwata * * This is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -72,13 +73,25 @@ struct vhci_unlink { }; /* Number of supported ports. Value has an upperbound of USB_MAXCHILDREN */ -#define VHCI_NPORTS 8 +#ifdef CONFIG_USBIP_VHCI_HC_PORTS +#define VHCI_HC_PORTS CONFIG_USBIP_VHCI_HC_PORTS +#else +#define VHCI_HC_PORTS 8 +#endif + +#ifdef CONFIG_USBIP_VHCI_NR_HCS +#define VHCI_NR_HCS CONFIG_USBIP_VHCI_NR_HCS +#else +#define VHCI_NR_HCS 1 +#endif + +#define MAX_STATUS_NAME 16 /* for usb_bus.hcpriv */ struct vhci_hcd { spinlock_t lock; - u32 port_status[VHCI_NPORTS]; + u32 port_status[VHCI_HC_PORTS]; unsigned resuming:1; unsigned long re_timeout; @@ -90,14 +103,19 @@ struct vhci_hcd { * wIndex shows the port number and begins from 1. * But, the index of this array begins from 0. */ - struct vhci_device vdev[VHCI_NPORTS]; + struct vhci_device vdev[VHCI_HC_PORTS]; }; -extern struct vhci_hcd *the_controller; -extern const struct attribute_group dev_attr_group; +extern int vhci_num_controllers; +extern struct platform_device **vhci_pdevs; +extern struct attribute_group vhci_attr_group; /* vhci_hcd.c */ -void rh_port_connect(int rhport, enum usb_device_speed speed); +void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed); + +/* vhci_sysfs.c */ +int vhci_init_attr_group(void); +void vhci_finish_attr_group(void); /* vhci_rx.c */ struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum); @@ -106,9 +124,14 @@ int vhci_rx_loop(void *data); /* vhci_tx.c */ int vhci_tx_loop(void *data); -static inline struct vhci_device *port_to_vdev(__u32 port) +static inline __u32 port_to_rhport(__u32 port) +{ + return port % VHCI_HC_PORTS; +} + +static inline int port_to_pdev_nr(__u32 port) { - return &the_controller->vdev[port]; + return port / VHCI_HC_PORTS; } static inline struct vhci_hcd *hcd_to_vhci(struct usb_hcd *hcd) @@ -116,14 +139,25 @@ static inline struct vhci_hcd *hcd_to_vhci(struct usb_hcd *hcd) return (struct vhci_hcd *) (hcd->hcd_priv); } +static inline struct device *hcd_dev(struct usb_hcd *hcd) +{ + return (hcd)->self.controller; +} + +static inline const char *hcd_name(struct usb_hcd *hcd) +{ + return (hcd)->self.bus_name; +} + static inline struct usb_hcd *vhci_to_hcd(struct vhci_hcd *vhci) { return container_of((void *) vhci, struct usb_hcd, hcd_priv); } -static inline struct device *vhci_dev(struct vhci_hcd *vhci) +static inline struct vhci_hcd *vdev_to_vhci(struct vhci_device *vdev) { - return vhci_to_hcd(vhci)->self.controller; + return container_of( + (void *)(vdev - vdev->rhport), struct vhci_hcd, vdev); } #endif /* __USBIP_VHCI_H */ diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 2e0450bec1b1..03eccf29ace0 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2003-2008 Takahiro Hirofuchi + * Copyright (C) 2015-2016 Nobuo Iwata * * This is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -56,7 +57,9 @@ static int vhci_get_frame_number(struct usb_hcd *hcd); static const char driver_name[] = "vhci_hcd"; static const char driver_desc[] = "USB/IP Virtual Host Controller"; -struct vhci_hcd *the_controller; +int vhci_num_controllers = VHCI_NR_HCS; + +struct platform_device **vhci_pdevs; static const char * const bit_desc[] = { "CONNECTION", /*0*/ @@ -119,47 +122,59 @@ static void dump_port_status_diff(u32 prev_status, u32 new_status) pr_debug("\n"); } -void rh_port_connect(int rhport, enum usb_device_speed speed) +void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed) { + struct vhci_hcd *vhci = vdev_to_vhci(vdev); + int rhport = vdev->rhport; + u32 status; unsigned long flags; usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport); - spin_lock_irqsave(&the_controller->lock, flags); + spin_lock_irqsave(&vhci->lock, flags); + + status = vhci->port_status[rhport]; - the_controller->port_status[rhport] |= USB_PORT_STAT_CONNECTION - | (1 << USB_PORT_FEAT_C_CONNECTION); + status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION); switch (speed) { case USB_SPEED_HIGH: - the_controller->port_status[rhport] |= USB_PORT_STAT_HIGH_SPEED; + status |= USB_PORT_STAT_HIGH_SPEED; break; case USB_SPEED_LOW: - the_controller->port_status[rhport] |= USB_PORT_STAT_LOW_SPEED; + status |= USB_PORT_STAT_LOW_SPEED; break; default: break; } - spin_unlock_irqrestore(&the_controller->lock, flags); + vhci->port_status[rhport] = status; + + spin_unlock_irqrestore(&vhci->lock, flags); - usb_hcd_poll_rh_status(vhci_to_hcd(the_controller)); + usb_hcd_poll_rh_status(vhci_to_hcd(vhci)); } -static void rh_port_disconnect(int rhport) +static void rh_port_disconnect(struct vhci_device *vdev) { + struct vhci_hcd *vhci = vdev_to_vhci(vdev); + int rhport = vdev->rhport; + u32 status; unsigned long flags; usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport); - spin_lock_irqsave(&the_controller->lock, flags); + spin_lock_irqsave(&vhci->lock, flags); + + status = vhci->port_status[rhport]; + + status &= ~USB_PORT_STAT_CONNECTION; + status |= (1 << USB_PORT_FEAT_C_CONNECTION); - the_controller->port_status[rhport] &= ~USB_PORT_STAT_CONNECTION; - the_controller->port_status[rhport] |= - (1 << USB_PORT_FEAT_C_CONNECTION); + vhci->port_status[rhport] = status; - spin_unlock_irqrestore(&the_controller->lock, flags); - usb_hcd_poll_rh_status(vhci_to_hcd(the_controller)); + spin_unlock_irqrestore(&vhci->lock, flags); + usb_hcd_poll_rh_status(vhci_to_hcd(vhci)); } #define PORT_C_MASK \ @@ -188,7 +203,7 @@ static int vhci_hub_status(struct usb_hcd *hcd, char *buf) int changed = 0; unsigned long flags; - retval = DIV_ROUND_UP(VHCI_NPORTS + 1, 8); + retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8); memset(buf, 0, retval); vhci = hcd_to_vhci(hcd); @@ -200,7 +215,7 @@ static int vhci_hub_status(struct usb_hcd *hcd, char *buf) } /* check pseudo status register for each port */ - for (rhport = 0; rhport < VHCI_NPORTS; rhport++) { + for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { if ((vhci->port_status[rhport] & PORT_C_MASK)) { /* The status of a port has been changed, */ usbip_dbg_vhci_rh("port %d status changed\n", rhport); @@ -225,7 +240,7 @@ static inline void hub_descriptor(struct usb_hub_descriptor *desc) desc->bDescLength = 9; desc->wHubCharacteristics = cpu_to_le16( HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); - desc->bNbrPorts = VHCI_NPORTS; + desc->bNbrPorts = VHCI_HC_PORTS; desc->u.hs.DeviceRemovable[0] = 0xff; desc->u.hs.DeviceRemovable[1] = 0xff; } @@ -238,7 +253,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, int rhport; unsigned long flags; - u32 prev_port_status[VHCI_NPORTS]; + u32 prev_port_status[VHCI_HC_PORTS]; if (!HCD_HW_ACCESSIBLE(hcd)) return -ETIMEDOUT; @@ -249,7 +264,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, */ usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue, wIndex); - if (wIndex > VHCI_NPORTS) + if (wIndex > VHCI_HC_PORTS) pr_err("invalid port number %d\n", wIndex); rhport = ((__u8)(wIndex & 0x00ff)) - 1; @@ -315,7 +330,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; case GetPortStatus: usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex); - if (wIndex > VHCI_NPORTS || wIndex < 1) { + if (wIndex > VHCI_HC_PORTS || wIndex < 1) { pr_err("invalid port number %d\n", wIndex); retval = -EPIPE; } @@ -416,14 +431,27 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, static struct vhci_device *get_vdev(struct usb_device *udev) { - int i; + struct platform_device *pdev; + struct usb_hcd *hcd; + struct vhci_hcd *vhci; + int pdev_nr, rhport; if (!udev) return NULL; - for (i = 0; i < VHCI_NPORTS; i++) - if (the_controller->vdev[i].udev == udev) - return port_to_vdev(i); + for (pdev_nr = 0; pdev_nr < vhci_num_controllers; pdev_nr++) { + pdev = *(vhci_pdevs + pdev_nr); + if (pdev == NULL) + continue; + hcd = platform_get_drvdata(pdev); + if (hcd == NULL) + continue; + vhci = hcd_to_vhci(hcd); + for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { + if (vhci->vdev[rhport].udev == udev) + return &vhci->vdev[rhport]; + } + } return NULL; } @@ -432,6 +460,7 @@ static void vhci_tx_urb(struct urb *urb) { struct vhci_device *vdev = get_vdev(urb->dev); struct vhci_priv *priv; + struct vhci_hcd *vhci = vdev_to_vhci(vdev); unsigned long flags; if (!vdev) { @@ -447,7 +476,7 @@ static void vhci_tx_urb(struct urb *urb) spin_lock_irqsave(&vdev->priv_lock, flags); - priv->seqnum = atomic_inc_return(&the_controller->seqnum); + priv->seqnum = atomic_inc_return(&vhci->seqnum); if (priv->seqnum == 0xffff) dev_info(&urb->dev->dev, "seqnum max\n"); @@ -465,7 +494,9 @@ static void vhci_tx_urb(struct urb *urb) static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) { + struct vhci_hcd *vhci = hcd_to_vhci(hcd); struct device *dev = &urb->dev->dev; + u8 portnum = urb->dev->portnum; int ret = 0; struct vhci_device *vdev; unsigned long flags; @@ -473,26 +504,30 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n", hcd, urb, mem_flags); + if (portnum > VHCI_HC_PORTS) { + pr_err("invalid port number %d\n", portnum); + return -ENODEV; + } + vdev = &vhci->vdev[portnum-1]; + /* patch to usb_sg_init() is in 2.5.60 */ BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length); - spin_lock_irqsave(&the_controller->lock, flags); + spin_lock_irqsave(&vhci->lock, flags); if (urb->status != -EINPROGRESS) { dev_err(dev, "URB already unlinked!, status %d\n", urb->status); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); return urb->status; } - vdev = port_to_vdev(urb->dev->portnum-1); - /* refuse enqueue for dead connection */ spin_lock(&vdev->ud.lock); if (vdev->ud.status == VDEV_ST_NULL || vdev->ud.status == VDEV_ST_ERROR) { dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport); spin_unlock(&vdev->ud.lock); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); return -ENODEV; } spin_unlock(&vdev->ud.lock); @@ -565,17 +600,16 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, out: vhci_tx_urb(urb); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); return 0; no_need_xmit: usb_hcd_unlink_urb_from_ep(hcd, urb); no_need_unlink: - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); if (!ret) - usb_hcd_giveback_urb(vhci_to_hcd(the_controller), - urb, urb->status); + usb_hcd_giveback_urb(hcd, urb, urb->status); return ret; } @@ -627,19 +661,20 @@ no_need_unlink: */ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { + struct vhci_hcd *vhci = hcd_to_vhci(hcd); struct vhci_priv *priv; struct vhci_device *vdev; unsigned long flags; pr_info("dequeue a urb %p\n", urb); - spin_lock_irqsave(&the_controller->lock, flags); + spin_lock_irqsave(&vhci->lock, flags); priv = urb->hcpriv; if (!priv) { /* URB was never linked! or will be soon given back by * vhci_rx. */ - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); return -EIDRM; } @@ -648,7 +683,7 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) ret = usb_hcd_check_unlink_urb(hcd, urb, status); if (ret) { - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); return ret; } } @@ -676,10 +711,9 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) usb_hcd_unlink_urb_from_ep(hcd, urb); - spin_unlock_irqrestore(&the_controller->lock, flags); - usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, - urb->status); - spin_lock_irqsave(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); + usb_hcd_giveback_urb(vhci_to_hcd(vhci), urb, urb->status); + spin_lock_irqsave(&vhci->lock, flags); } else { /* tcp connection is alive */ @@ -691,12 +725,12 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC); if (!unlink) { spin_unlock(&vdev->priv_lock); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); return -ENOMEM; } - unlink->seqnum = atomic_inc_return(&the_controller->seqnum); + unlink->seqnum = atomic_inc_return(&vhci->seqnum); if (unlink->seqnum == 0xffff) pr_info("seqnum max\n"); @@ -712,7 +746,7 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) spin_unlock(&vdev->priv_lock); } - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); usbip_dbg_vhci_hc("leave\n"); return 0; @@ -720,10 +754,12 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) static void vhci_device_unlink_cleanup(struct vhci_device *vdev) { + struct vhci_hcd *vhci = vdev_to_vhci(vdev); + struct usb_hcd *hcd = vhci_to_hcd(vhci); struct vhci_unlink *unlink, *tmp; unsigned long flags; - spin_lock_irqsave(&the_controller->lock, flags); + spin_lock_irqsave(&vhci->lock, flags); spin_lock(&vdev->priv_lock); list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) { @@ -752,24 +788,23 @@ static void vhci_device_unlink_cleanup(struct vhci_device *vdev) urb->status = -ENODEV; - usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); + usb_hcd_unlink_urb_from_ep(hcd, urb); list_del(&unlink->list); spin_unlock(&vdev->priv_lock); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); - usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, - urb->status); + usb_hcd_giveback_urb(hcd, urb, urb->status); - spin_lock_irqsave(&the_controller->lock, flags); + spin_lock_irqsave(&vhci->lock, flags); spin_lock(&vdev->priv_lock); kfree(unlink); } spin_unlock(&vdev->priv_lock); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); } /* @@ -827,7 +862,7 @@ static void vhci_shutdown_connection(struct usbip_device *ud) * is actually given back by vhci_rx after receiving its return pdu. * */ - rh_port_disconnect(vdev->rhport); + rh_port_disconnect(vdev); pr_info("disconnect device\n"); } @@ -866,7 +901,7 @@ static void vhci_device_unusable(struct usbip_device *ud) static void vhci_device_init(struct vhci_device *vdev) { - memset(vdev, 0, sizeof(*vdev)); + memset(vdev, 0, sizeof(struct vhci_device)); vdev->ud.side = USBIP_VHCI; vdev->ud.status = VDEV_ST_NULL; @@ -887,17 +922,34 @@ static void vhci_device_init(struct vhci_device *vdev) usbip_start_eh(&vdev->ud); } +static int hcd_name_to_id(const char *name) +{ + char *c; + long val; + int ret; + + c = strchr(name, '.'); + if (c == NULL) + return 0; + + ret = kstrtol(c+1, 10, &val); + if (ret < 0) + return ret; + + return val; +} + static int vhci_start(struct usb_hcd *hcd) { struct vhci_hcd *vhci = hcd_to_vhci(hcd); - int rhport; + int id, rhport; int err = 0; usbip_dbg_vhci_hc("enter vhci_start\n"); /* initialize private data of usb_hcd */ - for (rhport = 0; rhport < VHCI_NPORTS; rhport++) { + for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { struct vhci_device *vdev = &vhci->vdev[rhport]; vhci_device_init(vdev); @@ -910,11 +962,26 @@ static int vhci_start(struct usb_hcd *hcd) hcd->power_budget = 0; /* no limit */ hcd->uses_new_polling = 1; + id = hcd_name_to_id(hcd_name(hcd)); + if (id < 0) { + pr_err("invalid vhci name %s\n", hcd_name(hcd)); + return -EINVAL; + } + /* vhci_hcd is now ready to be controlled through sysfs */ - err = sysfs_create_group(&vhci_dev(vhci)->kobj, &dev_attr_group); - if (err) { - pr_err("create sysfs files\n"); - return err; + if (id == 0) { + err = vhci_init_attr_group(); + if (err) { + pr_err("init attr group\n"); + return err; + } + err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); + if (err) { + pr_err("create sysfs files\n"); + vhci_finish_attr_group(); + return err; + } + pr_info("created sysfs %s\n", hcd_name(hcd)); } return 0; @@ -923,15 +990,19 @@ static int vhci_start(struct usb_hcd *hcd) static void vhci_stop(struct usb_hcd *hcd) { struct vhci_hcd *vhci = hcd_to_vhci(hcd); - int rhport = 0; + int id, rhport; usbip_dbg_vhci_hc("stop VHCI controller\n"); /* 1. remove the userland interface of vhci_hcd */ - sysfs_remove_group(&vhci_dev(vhci)->kobj, &dev_attr_group); + id = hcd_name_to_id(hcd_name(hcd)); + if (id == 0) { + sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); + vhci_finish_attr_group(); + } /* 2. shutdown all the ports of vhci_hcd */ - for (rhport = 0; rhport < VHCI_NPORTS; rhport++) { + for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { struct vhci_device *vdev = &vhci->vdev[rhport]; usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED); @@ -1025,9 +1096,6 @@ static int vhci_hcd_probe(struct platform_device *pdev) } hcd->has_tt = 1; - /* this is private data for vhci_hcd */ - the_controller = hcd_to_vhci(hcd); - /* * Finish generic HCD structure initialization and register. * Call the driver's reset() and start() routines. @@ -1036,7 +1104,6 @@ static int vhci_hcd_probe(struct platform_device *pdev) if (ret != 0) { pr_err("usb_add_hcd failed %d\n", ret); usb_put_hcd(hcd); - the_controller = NULL; return ret; } @@ -1059,7 +1126,6 @@ static int vhci_hcd_remove(struct platform_device *pdev) */ usb_remove_hcd(hcd); usb_put_hcd(hcd); - the_controller = NULL; return 0; } @@ -1070,21 +1136,24 @@ static int vhci_hcd_remove(struct platform_device *pdev) static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd; - int rhport = 0; + struct vhci_hcd *vhci; + int rhport; int connected = 0; int ret = 0; unsigned long flags; hcd = platform_get_drvdata(pdev); + if (!hcd) + return 0; + vhci = hcd_to_vhci(hcd); - spin_lock_irqsave(&the_controller->lock, flags); + spin_lock_irqsave(&vhci->lock, flags); - for (rhport = 0; rhport < VHCI_NPORTS; rhport++) - if (the_controller->port_status[rhport] & - USB_PORT_STAT_CONNECTION) + for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) + if (vhci->port_status[rhport] & USB_PORT_STAT_CONNECTION) connected += 1; - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); if (connected > 0) { dev_info(&pdev->dev, @@ -1106,6 +1175,8 @@ static int vhci_hcd_resume(struct platform_device *pdev) dev_dbg(&pdev->dev, "%s\n", __func__); hcd = platform_get_drvdata(pdev); + if (!hcd) + return 0; set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); usb_hcd_poll_rh_status(hcd); @@ -1129,52 +1200,78 @@ static struct platform_driver vhci_driver = { }, }; -/* - * The VHCI 'device' is 'virtual'; not a real plug&play hardware. - * We need to add this virtual device as a platform device arbitrarily: - * 1. platform_device_register() - */ -static void the_pdev_release(struct device *dev) +static int add_platform_device(int id) { + struct platform_device *pdev; + int dev_nr; + + if (id == 0) + dev_nr = -1; + else + dev_nr = id; + + pdev = platform_device_register_simple(driver_name, dev_nr, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + *(vhci_pdevs + id) = pdev; + return 0; } -static struct platform_device the_pdev = { - /* should be the same name as driver_name */ - .name = driver_name, - .id = -1, - .dev = { - .release = the_pdev_release, - }, -}; +static void del_platform_devices(void) +{ + struct platform_device *pdev; + int i; + + for (i = 0; i < vhci_num_controllers; i++) { + pdev = *(vhci_pdevs + i); + if (pdev != NULL) + platform_device_unregister(pdev); + *(vhci_pdevs + i) = NULL; + } + sysfs_remove_link(&platform_bus.kobj, driver_name); +} static int __init vhci_hcd_init(void) { - int ret; + int i, ret; if (usb_disabled()) return -ENODEV; + if (vhci_num_controllers < 1) + vhci_num_controllers = 1; + + vhci_pdevs = kcalloc(vhci_num_controllers, sizeof(void *), GFP_KERNEL); + if (vhci_pdevs == NULL) + return -ENOMEM; + ret = platform_driver_register(&vhci_driver); if (ret) goto err_driver_register; - ret = platform_device_register(&the_pdev); - if (ret) - goto err_platform_device_register; + for (i = 0; i < vhci_num_controllers; i++) { + ret = add_platform_device(i); + if (ret) + goto err_platform_device_register; + } pr_info(DRIVER_DESC " v" USBIP_VERSION "\n"); return ret; err_platform_device_register: + del_platform_devices(); platform_driver_unregister(&vhci_driver); err_driver_register: + kfree(vhci_pdevs); return ret; } static void __exit vhci_hcd_exit(void) { - platform_device_unregister(&the_pdev); + del_platform_devices(); platform_driver_unregister(&vhci_driver); + kfree(vhci_pdevs); } module_init(vhci_hcd_init); diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c index d656e0edc3d5..fc2d319e2360 100644 --- a/drivers/usb/usbip/vhci_rx.c +++ b/drivers/usb/usbip/vhci_rx.c @@ -70,6 +70,7 @@ struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum) static void vhci_recv_ret_submit(struct vhci_device *vdev, struct usbip_header *pdu) { + struct vhci_hcd *vhci = vdev_to_vhci(vdev); struct usbip_device *ud = &vdev->ud; struct urb *urb; unsigned long flags; @@ -81,7 +82,7 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, if (!urb) { pr_err("cannot find a urb of seqnum %u\n", pdu->base.seqnum); pr_info("max seqnum %d\n", - atomic_read(&the_controller->seqnum)); + atomic_read(&vhci->seqnum)); usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); return; } @@ -105,11 +106,11 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, usbip_dbg_vhci_rx("now giveback urb %p\n", urb); - spin_lock_irqsave(&the_controller->lock, flags); - usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_lock_irqsave(&vhci->lock, flags); + usb_hcd_unlink_urb_from_ep(vhci_to_hcd(vhci), urb); + spin_unlock_irqrestore(&vhci->lock, flags); - usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); + usb_hcd_giveback_urb(vhci_to_hcd(vhci), urb, urb->status); usbip_dbg_vhci_rx("Leave\n"); } @@ -142,6 +143,7 @@ static struct vhci_unlink *dequeue_pending_unlink(struct vhci_device *vdev, static void vhci_recv_ret_unlink(struct vhci_device *vdev, struct usbip_header *pdu) { + struct vhci_hcd *vhci = vdev_to_vhci(vdev); struct vhci_unlink *unlink; struct urb *urb; unsigned long flags; @@ -174,12 +176,11 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, urb->status = pdu->u.ret_unlink.status; pr_info("urb->status %d\n", urb->status); - spin_lock_irqsave(&the_controller->lock, flags); - usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_lock_irqsave(&vhci->lock, flags); + usb_hcd_unlink_urb_from_ep(vhci_to_hcd(vhci), urb); + spin_unlock_irqrestore(&vhci->lock, flags); - usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, - urb->status); + usb_hcd_giveback_urb(vhci_to_hcd(vhci), urb, urb->status); } kfree(unlink); diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c index 5b5462eb1665..c404017c1b5a 100644 --- a/drivers/usb/usbip/vhci_sysfs.c +++ b/drivers/usb/usbip/vhci_sysfs.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2003-2008 Takahiro Hirofuchi + * Copyright (C) 2015-2016 Nobuo Iwata * * This is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,6 +21,8 @@ #include <linux/kthread.h> #include <linux/file.h> #include <linux/net.h> +#include <linux/platform_device.h> +#include <linux/slab.h> #include "usbip_common.h" #include "vhci.h" @@ -27,106 +30,190 @@ /* TODO: refine locking ?*/ /* Sysfs entry to show port status */ -static ssize_t status_show(struct device *dev, struct device_attribute *attr, - char *out) +static ssize_t status_show_vhci(int pdev_nr, char *out) { + struct platform_device *pdev = *(vhci_pdevs + pdev_nr); + struct vhci_hcd *vhci; char *s = out; int i = 0; unsigned long flags; - BUG_ON(!the_controller || !out); + if (!pdev || !out) { + usbip_dbg_vhci_sysfs("show status error\n"); + return 0; + } + + vhci = hcd_to_vhci(platform_get_drvdata(pdev)); - spin_lock_irqsave(&the_controller->lock, flags); + spin_lock_irqsave(&vhci->lock, flags); /* * output example: - * prt sta spd dev socket local_busid - * 000 004 000 000 c5a7bb80 1-2.3 - * 001 004 000 000 d8cee980 2-3.4 + * port sta spd dev socket local_busid + * 0000 004 000 00000000 c5a7bb80 1-2.3 + * 0001 004 000 00000000 d8cee980 2-3.4 * * IP address can be retrieved from a socket pointer address by looking * up /proc/net/{tcp,tcp6}. Also, a userland program may remember a * port number and its peer IP address. */ - out += sprintf(out, - "prt sta spd bus dev socket local_busid\n"); - - for (i = 0; i < VHCI_NPORTS; i++) { - struct vhci_device *vdev = port_to_vdev(i); + for (i = 0; i < VHCI_HC_PORTS; i++) { + struct vhci_device *vdev = &vhci->vdev[i]; spin_lock(&vdev->ud.lock); - out += sprintf(out, "%03u %03u ", i, vdev->ud.status); + out += sprintf(out, "%04u %03u ", + (pdev_nr * VHCI_HC_PORTS) + i, + vdev->ud.status); if (vdev->ud.status == VDEV_ST_USED) { out += sprintf(out, "%03u %08x ", - vdev->speed, vdev->devid); - out += sprintf(out, "%16p ", vdev->ud.tcp_socket); - out += sprintf(out, "%s", dev_name(&vdev->udev->dev)); + vdev->speed, vdev->devid); + out += sprintf(out, "%16p %s", + vdev->ud.tcp_socket, + dev_name(&vdev->udev->dev)); } else { - out += sprintf(out, "000 000 000 0000000000000000 0-0"); + out += sprintf(out, "000 00000000 "); + out += sprintf(out, "0000000000000000 0-0"); } out += sprintf(out, "\n"); spin_unlock(&vdev->ud.lock); } - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); + + return out - s; +} + +static ssize_t status_show_not_ready(int pdev_nr, char *out) +{ + char *s = out; + int i = 0; + + for (i = 0; i < VHCI_HC_PORTS; i++) { + out += sprintf(out, "%04u %03u ", + (pdev_nr * VHCI_HC_PORTS) + i, + VDEV_ST_NOTASSIGNED); + out += sprintf(out, "000 00000000 0000000000000000 0-0"); + out += sprintf(out, "\n"); + } + return out - s; +} + +static int status_name_to_id(const char *name) +{ + char *c; + long val; + int ret; + + c = strchr(name, '.'); + if (c == NULL) + return 0; + ret = kstrtol(c+1, 10, &val); + if (ret < 0) + return ret; + + return val; +} + +static ssize_t status_show(struct device *dev, + struct device_attribute *attr, char *out) +{ + char *s = out; + int pdev_nr; + + out += sprintf(out, + "port sta spd dev socket local_busid\n"); + + pdev_nr = status_name_to_id(attr->attr.name); + if (pdev_nr < 0) + out += status_show_not_ready(pdev_nr, out); + else + out += status_show_vhci(pdev_nr, out); + + return out - s; +} + +static ssize_t nports_show(struct device *dev, struct device_attribute *attr, + char *out) +{ + char *s = out; + + out += sprintf(out, "%d\n", VHCI_HC_PORTS * vhci_num_controllers); return out - s; } -static DEVICE_ATTR_RO(status); +static DEVICE_ATTR_RO(nports); /* Sysfs entry to shutdown a virtual connection */ -static int vhci_port_disconnect(__u32 rhport) +static int vhci_port_disconnect(struct vhci_hcd *vhci, __u32 rhport) { - struct vhci_device *vdev; + struct vhci_device *vdev = &vhci->vdev[rhport]; unsigned long flags; usbip_dbg_vhci_sysfs("enter\n"); /* lock */ - spin_lock_irqsave(&the_controller->lock, flags); - - vdev = port_to_vdev(rhport); - + spin_lock_irqsave(&vhci->lock, flags); spin_lock(&vdev->ud.lock); + if (vdev->ud.status == VDEV_ST_NULL) { pr_err("not connected %d\n", vdev->ud.status); /* unlock */ spin_unlock(&vdev->ud.lock); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); return -EINVAL; } /* unlock */ spin_unlock(&vdev->ud.lock); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); usbip_event_add(&vdev->ud, VDEV_EVENT_DOWN); return 0; } +static int valid_port(__u32 pdev_nr, __u32 rhport) +{ + if (pdev_nr >= vhci_num_controllers) { + pr_err("pdev %u\n", pdev_nr); + return 0; + } + if (rhport >= VHCI_HC_PORTS) { + pr_err("rhport %u\n", rhport); + return 0; + } + return 1; +} + static ssize_t store_detach(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - int err; - __u32 rhport = 0; + __u32 port = 0, pdev_nr = 0, rhport = 0; + struct usb_hcd *hcd; + int ret; - if (sscanf(buf, "%u", &rhport) != 1) + if (kstrtoint(buf, 10, &port) < 0) return -EINVAL; - /* check rhport */ - if (rhport >= VHCI_NPORTS) { - dev_err(dev, "invalid port %u\n", rhport); + pdev_nr = port_to_pdev_nr(port); + rhport = port_to_rhport(port); + + if (!valid_port(pdev_nr, rhport)) return -EINVAL; + + hcd = platform_get_drvdata(*(vhci_pdevs + pdev_nr)); + if (hcd == NULL) { + dev_err(dev, "port is not ready %u\n", port); + return -EAGAIN; } - err = vhci_port_disconnect(rhport); - if (err < 0) + ret = vhci_port_disconnect(hcd_to_vhci(hcd), rhport); + if (ret < 0) return -EINVAL; usbip_dbg_vhci_sysfs("Leave\n"); @@ -135,16 +222,12 @@ static ssize_t store_detach(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR(detach, S_IWUSR, NULL, store_detach); -/* Sysfs entry to establish a virtual connection */ -static int valid_args(__u32 rhport, enum usb_device_speed speed) +static int valid_args(__u32 pdev_nr, __u32 rhport, enum usb_device_speed speed) { - /* check rhport */ - if (rhport >= VHCI_NPORTS) { - pr_err("port %u\n", rhport); - return -EINVAL; + if (!valid_port(pdev_nr, rhport)) { + return 0; } - /* check speed */ switch (speed) { case USB_SPEED_LOW: case USB_SPEED_FULL: @@ -154,12 +237,13 @@ static int valid_args(__u32 rhport, enum usb_device_speed speed) default: pr_err("Failed attach request for unsupported USB speed: %s\n", usb_speed_string(speed)); - return -EINVAL; + return 0; } - return 0; + return 1; } +/* Sysfs entry to establish a virtual connection */ /* * To start a new USB/IP attachment, a userland program needs to setup a TCP * connection and then write its socket descriptor with remote device @@ -174,10 +258,12 @@ static int valid_args(__u32 rhport, enum usb_device_speed speed) static ssize_t store_attach(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct vhci_device *vdev; struct socket *socket; int sockfd = 0; - __u32 rhport = 0, devid = 0, speed = 0; + __u32 port = 0, pdev_nr = 0, rhport = 0, devid = 0, speed = 0; + struct usb_hcd *hcd; + struct vhci_hcd *vhci; + struct vhci_device *vdev; int err; unsigned long flags; @@ -187,16 +273,28 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr, * @devid: unique device identifier in a remote host * @speed: usb device speed in a remote host */ - if (sscanf(buf, "%u %u %u %u", &rhport, &sockfd, &devid, &speed) != 4) + if (sscanf(buf, "%u %u %u %u", &port, &sockfd, &devid, &speed) != 4) return -EINVAL; + pdev_nr = port_to_pdev_nr(port); + rhport = port_to_rhport(port); - usbip_dbg_vhci_sysfs("rhport(%u) sockfd(%u) devid(%u) speed(%u)\n", - rhport, sockfd, devid, speed); + usbip_dbg_vhci_sysfs("port(%u) pdev(%d) rhport(%u)\n", + port, pdev_nr, rhport); + usbip_dbg_vhci_sysfs("sockfd(%u) devid(%u) speed(%u)\n", + sockfd, devid, speed); /* check received parameters */ - if (valid_args(rhport, speed) < 0) + if (!valid_args(pdev_nr, rhport, speed)) return -EINVAL; + hcd = platform_get_drvdata(*(vhci_pdevs + pdev_nr)); + if (hcd == NULL) { + dev_err(dev, "port %d is not ready\n", port); + return -EAGAIN; + } + vhci = hcd_to_vhci(hcd); + vdev = &vhci->vdev[rhport]; + /* Extract socket from fd. */ socket = sockfd_lookup(sockfd, &err); if (!socket) @@ -205,14 +303,13 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr, /* now need lock until setting vdev status as used */ /* begin a lock */ - spin_lock_irqsave(&the_controller->lock, flags); - vdev = port_to_vdev(rhport); + spin_lock_irqsave(&vhci->lock, flags); spin_lock(&vdev->ud.lock); if (vdev->ud.status != VDEV_ST_NULL) { /* end of the lock */ spin_unlock(&vdev->ud.lock); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); sockfd_put(socket); @@ -220,9 +317,10 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr, return -EINVAL; } - dev_info(dev, - "rhport(%u) sockfd(%d) devid(%u) speed(%u) speed_str(%s)\n", - rhport, sockfd, devid, speed, usb_speed_string(speed)); + dev_info(dev, "pdev(%u) rhport(%u) sockfd(%d)\n", + pdev_nr, rhport, sockfd); + dev_info(dev, "devid(%u) speed(%u) speed_str(%s)\n", + devid, speed, usb_speed_string(speed)); vdev->devid = devid; vdev->speed = speed; @@ -230,26 +328,92 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr, vdev->ud.status = VDEV_ST_NOTASSIGNED; spin_unlock(&vdev->ud.lock); - spin_unlock_irqrestore(&the_controller->lock, flags); + spin_unlock_irqrestore(&vhci->lock, flags); /* end the lock */ vdev->ud.tcp_rx = kthread_get_run(vhci_rx_loop, &vdev->ud, "vhci_rx"); vdev->ud.tcp_tx = kthread_get_run(vhci_tx_loop, &vdev->ud, "vhci_tx"); - rh_port_connect(rhport, speed); + rh_port_connect(vdev, speed); return count; } static DEVICE_ATTR(attach, S_IWUSR, NULL, store_attach); -static struct attribute *dev_attrs[] = { - &dev_attr_status.attr, - &dev_attr_detach.attr, - &dev_attr_attach.attr, - &dev_attr_usbip_debug.attr, - NULL, +#define MAX_STATUS_NAME 16 + +struct status_attr { + struct device_attribute attr; + char name[MAX_STATUS_NAME+1]; }; -const struct attribute_group dev_attr_group = { - .attrs = dev_attrs, +static struct status_attr *status_attrs; + +static void set_status_attr(int id) +{ + struct status_attr *status; + + status = status_attrs + id; + if (id == 0) + strcpy(status->name, "status"); + else + snprintf(status->name, MAX_STATUS_NAME+1, "status.%d", id); + status->attr.attr.name = status->name; + status->attr.attr.mode = S_IRUGO; + status->attr.show = status_show; +} + +static int init_status_attrs(void) +{ + int id; + + status_attrs = kcalloc(vhci_num_controllers, sizeof(struct status_attr), + GFP_KERNEL); + if (status_attrs == NULL) + return -ENOMEM; + + for (id = 0; id < vhci_num_controllers; id++) + set_status_attr(id); + + return 0; +} + +static void finish_status_attrs(void) +{ + kfree(status_attrs); +} + +struct attribute_group vhci_attr_group = { + .attrs = NULL, }; + +int vhci_init_attr_group(void) +{ + struct attribute **attrs; + int ret, i; + + attrs = kcalloc((vhci_num_controllers + 5), sizeof(struct attribute *), + GFP_KERNEL); + if (attrs == NULL) + return -ENOMEM; + + ret = init_status_attrs(); + if (ret) { + kfree(attrs); + return ret; + } + *attrs = &dev_attr_nports.attr; + *(attrs + 1) = &dev_attr_detach.attr; + *(attrs + 2) = &dev_attr_attach.attr; + *(attrs + 3) = &dev_attr_usbip_debug.attr; + for (i = 0; i < vhci_num_controllers; i++) + *(attrs + i + 4) = &((status_attrs + i)->attr.attr); + vhci_attr_group.attrs = attrs; + return 0; +} + +void vhci_finish_attr_group(void) +{ + finish_status_attrs(); + kfree(vhci_attr_group.attrs); +} diff --git a/drivers/usb/usbip/vudc_dev.c b/drivers/usb/usbip/vudc_dev.c index 8994a13819ab..7091848df6c8 100644 --- a/drivers/usb/usbip/vudc_dev.c +++ b/drivers/usb/usbip/vudc_dev.c @@ -450,7 +450,7 @@ static void vudc_shutdown(struct usbip_device *ud) if (ud->tcp_socket) kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); - if (ud->tcp_tx) { + if (ud->tcp_rx) { kthread_stop_put(ud->tcp_rx); ud->tcp_rx = NULL; } diff --git a/drivers/usb/usbip/vudc_rx.c b/drivers/usb/usbip/vudc_rx.c index 344bd9473475..e429b59f6f8a 100644 --- a/drivers/usb/usbip/vudc_rx.c +++ b/drivers/usb/usbip/vudc_rx.c @@ -142,7 +142,7 @@ static int v_recv_cmd_submit(struct vudc *udc, urb_p->urb->status = -EINPROGRESS; /* FIXME: more pipe setup to please usbip_common */ - urb_p->urb->pipe &= ~(11 << 30); + urb_p->urb->pipe &= ~(3 << 30); switch (urb_p->ep->type) { case USB_ENDPOINT_XFER_BULK: urb_p->urb->pipe |= (PIPE_BULK << 30); diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c index da1b872918b5..fb70cbef0671 100644 --- a/drivers/usb/wusbcore/cbaf.c +++ b/drivers/usb/wusbcore/cbaf.c @@ -610,8 +610,7 @@ static int cbaf_probe(struct usb_interface *iface, cbaf->usb_iface = usb_get_intf(iface); result = cbaf_check(cbaf); if (result < 0) { - dev_err(dev, "This device is not WUSB-CBAF compliant" - "and is not supported yet.\n"); + dev_err(dev, "This device is not WUSB-CBAF compliant and is not supported yet.\n"); goto error_check; } diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c index 33acd1599e99..79b2b628066d 100644 --- a/drivers/usb/wusbcore/crypto.c +++ b/drivers/usb/wusbcore/crypto.c @@ -229,10 +229,8 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc, zero_padding = sizeof(struct aes_ccm_block) - zero_padding; dst_size = blen + sizeof(b0) + sizeof(b1) + zero_padding; dst_buf = kzalloc(dst_size, GFP_KERNEL); - if (dst_buf == NULL) { - printk(KERN_ERR "E: can't alloc destination buffer\n"); + if (!dst_buf) goto error_dst_buf; - } memset(iv, 0, sizeof(iv)); diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c index b66faaf3e842..8c9421b69da0 100644 --- a/drivers/usb/wusbcore/security.c +++ b/drivers/usb/wusbcore/security.c @@ -374,10 +374,8 @@ int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, struct wusb_keydvt_out keydvt_out; hs = kcalloc(3, sizeof(hs[0]), GFP_KERNEL); - if (hs == NULL) { - dev_err(dev, "can't allocate handshake data\n"); + if (!hs) goto error_kzalloc; - } /* We need to turn encryption before beginning the 4way * hshake (WUSB1.0[.3.2.2]) */ diff --git a/drivers/usb/wusbcore/wa-nep.c b/drivers/usb/wusbcore/wa-nep.c index 60a10d21947d..ed4622279c63 100644 --- a/drivers/usb/wusbcore/wa-nep.c +++ b/drivers/usb/wusbcore/wa-nep.c @@ -271,16 +271,11 @@ int wa_nep_create(struct wahc *wa, struct usb_interface *iface) epd = &iface->cur_altsetting->endpoint[0].desc; wa->nep_buffer_size = 1024; wa->nep_buffer = kmalloc(wa->nep_buffer_size, GFP_KERNEL); - if (wa->nep_buffer == NULL) { - dev_err(dev, - "Unable to allocate notification's read buffer\n"); + if (!wa->nep_buffer) goto error_nep_buffer; - } wa->nep_urb = usb_alloc_urb(0, GFP_KERNEL); - if (wa->nep_urb == NULL) { - dev_err(dev, "Unable to allocate notification URB\n"); + if (wa->nep_urb == NULL) goto error_urb_alloc; - } usb_fill_int_urb(wa->nep_urb, usb_dev, usb_rcvintpipe(usb_dev, epd->bEndpointAddress), wa->nep_buffer, wa->nep_buffer_size, diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 69af4fd9e072..167fcc71f5f6 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -2865,10 +2865,8 @@ int wa_dti_start(struct wahc *wa) goto out; wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL); - if (wa->dti_urb == NULL) { - dev_err(dev, "Can't allocate DTI URB\n"); + if (wa->dti_urb == NULL) goto error_dti_urb_alloc; - } usb_fill_bulk_urb( wa->dti_urb, wa->usb_dev, usb_rcvbulkpipe(wa->usb_dev, 0x80 | dti_epd->bEndpointAddress), diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c index 0257f35cfb9d..0aa6c3c29d17 100644 --- a/drivers/uwb/hwa-rc.c +++ b/drivers/uwb/hwa-rc.c @@ -701,10 +701,8 @@ static int hwarc_neep_init(struct uwb_rc *rc) goto error_rd_buffer; } hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL); - if (hwarc->neep_urb == NULL) { - dev_err(dev, "Unable to allocate notification URB\n"); + if (hwarc->neep_urb == NULL) goto error_urb_alloc; - } usb_fill_int_urb(hwarc->neep_urb, usb_dev, usb_rcvintpipe(usb_dev, epd->bEndpointAddress), hwarc->rd_buffer, PAGE_SIZE, diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index 68952d9ccf83..99ebf6ea3de6 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -666,10 +666,8 @@ static int usb_pcwd_probe(struct usb_interface *interface, /* allocate the urb's */ usb_pcwd->intr_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!usb_pcwd->intr_urb) { - pr_err("Out of memory\n"); + if (!usb_pcwd->intr_urb) goto error; - } /* initialise the intr urb's */ usb_fill_int_urb(usb_pcwd->intr_urb, udev, pipe, diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index ebd5c1fcdea4..4901fb358b07 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -10,6 +10,7 @@ #define BCMA_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ #define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ #define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +#define BCMA_CLKCTLST_HQCLKREQ 0x00000040 /* HQ Clock */ #define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */ #define BCMA_CLKCTLST_EXTRESREQ_SHIFT 8 #define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ diff --git a/include/linux/extcon.h b/include/linux/extcon.h index 61004413dc64..b871c0cb1f02 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -29,6 +29,15 @@ #include <linux/device.h> /* + * Define the type of supported external connectors + */ +#define EXTCON_TYPE_USB BIT(0) /* USB connector */ +#define EXTCON_TYPE_CHG BIT(1) /* Charger connector */ +#define EXTCON_TYPE_JACK BIT(2) /* Jack connector */ +#define EXTCON_TYPE_DISP BIT(3) /* Display connector */ +#define EXTCON_TYPE_MISC BIT(4) /* Miscellaneous connector */ + +/* * Define the unique id of supported external connectors */ #define EXTCON_NONE 0 @@ -44,6 +53,7 @@ #define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */ #define EXTCON_CHG_USB_FAST 9 #define EXTCON_CHG_USB_SLOW 10 +#define EXTCON_CHG_WPT 11 /* Wireless Power Transfer */ /* Jack external connector */ #define EXTCON_JACK_MICROPHONE 20 @@ -60,6 +70,8 @@ #define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */ #define EXTCON_DISP_DVI 42 /* Digital Visual Interface */ #define EXTCON_DISP_VGA 43 /* Video Graphics Array */ +#define EXTCON_DISP_DP 44 /* Display Port */ +#define EXTCON_DISP_HMD 45 /* Head-Mounted Display */ /* Miscellaneous external connector */ #define EXTCON_DOCK 60 @@ -68,6 +80,85 @@ #define EXTCON_NUM 63 +/* + * Define the property of supported external connectors. + * + * When adding the new extcon property, they *must* have + * the type/value/default information. Also, you *have to* + * modify the EXTCON_PROP_[type]_START/END definitions + * which mean the range of the supported properties + * for each extcon type. + * + * The naming style of property + * : EXTCON_PROP_[type]_[property name] + * + * EXTCON_PROP_USB_[property name] : USB property + * EXTCON_PROP_CHG_[property name] : Charger property + * EXTCON_PROP_JACK_[property name] : Jack property + * EXTCON_PROP_DISP_[property name] : Display property + */ + +/* + * Properties of EXTCON_TYPE_USB. + * + * - EXTCON_PROP_USB_VBUS + * @type: integer (intval) + * @value: 0 (low) or 1 (high) + * @default: 0 (low) + * - EXTCON_PROP_USB_TYPEC_POLARITY + * @type: integer (intval) + * @value: 0 (normal) or 1 (flip) + * @default: 0 (normal) + * - EXTCON_PROP_USB_SS (SuperSpeed) + * @type: integer (intval) + * @value: 0 (USB/USB2) or 1 (USB3) + * @default: 0 (USB/USB2) + * + */ +#define EXTCON_PROP_USB_VBUS 0 +#define EXTCON_PROP_USB_TYPEC_POLARITY 1 +#define EXTCON_PROP_USB_SS 2 + +#define EXTCON_PROP_USB_MIN 0 +#define EXTCON_PROP_USB_MAX 2 +#define EXTCON_PROP_USB_CNT (EXTCON_PROP_USB_MAX - EXTCON_PROP_USB_MIN + 1) + +/* Properties of EXTCON_TYPE_CHG. */ +#define EXTCON_PROP_CHG_MIN 50 +#define EXTCON_PROP_CHG_MAX 50 +#define EXTCON_PROP_CHG_CNT (EXTCON_PROP_CHG_MAX - EXTCON_PROP_CHG_MIN + 1) + +/* Properties of EXTCON_TYPE_JACK. */ +#define EXTCON_PROP_JACK_MIN 100 +#define EXTCON_PROP_JACK_MAX 100 +#define EXTCON_PROP_JACK_CNT (EXTCON_PROP_JACK_MAX - EXTCON_PROP_JACK_MIN + 1) + +/* + * Properties of EXTCON_TYPE_DISP. + * + * - EXTCON_PROP_DISP_HPD (Hot Plug Detect) + * @type: integer (intval) + * @value: 0 (no hpd) or 1 (hpd) + * @default: 0 (no hpd) + * + */ +#define EXTCON_PROP_DISP_HPD 150 + +/* Properties of EXTCON_TYPE_DISP. */ +#define EXTCON_PROP_DISP_MIN 150 +#define EXTCON_PROP_DISP_MAX 151 +#define EXTCON_PROP_DISP_CNT (EXTCON_PROP_DISP_MAX - EXTCON_PROP_DISP_MIN + 1) + +/* + * Define the type of property's value. + * + * Define the property's value as union type. Because each property + * would need the different data type to store it. + */ +union extcon_property_value { + int intval; /* type : integer (intval) */ +}; + struct extcon_cable; /** @@ -150,26 +241,42 @@ extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev); /* - * get/set/update_state access the 32b encoded state value, which represents - * states of all possible cables of the multistate port. For example, if one - * calls extcon_set_state(edev, 0x7), it may mean that all the three cables - * are attached to the port. + * get/set_state access each bit of the 32b encoded state value. + * They are used to access the status of each cable based on the cable id. */ -static inline u32 extcon_get_state(struct extcon_dev *edev) -{ - return edev->state; -} +extern int extcon_get_state(struct extcon_dev *edev, unsigned int id); +extern int extcon_set_state(struct extcon_dev *edev, unsigned int id, + bool cable_state); +extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id, + bool cable_state); +/* + * Synchronize the state and property data for a specific external connector. + */ +extern int extcon_sync(struct extcon_dev *edev, unsigned int id); -extern int extcon_set_state(struct extcon_dev *edev, u32 state); -extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state); +/* + * get/set_property access the property value of each external connector. + * They are used to access the property of each cable based on the property id. + */ +extern int extcon_get_property(struct extcon_dev *edev, unsigned int id, + unsigned int prop, + union extcon_property_value *prop_val); +extern int extcon_set_property(struct extcon_dev *edev, unsigned int id, + unsigned int prop, + union extcon_property_value prop_val); +extern int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id, + unsigned int prop, + union extcon_property_value prop_val); /* - * get/set_cable_state access each bit of the 32b encoded state value. - * They are used to access the status of each cable based on the cable id. + * get/set_property_capability set the capability of the property for each + * external connector. They are used to set the capability of the property + * of each external connector based on the id and property. */ -extern int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id); -extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id, - bool cable_state); +extern int extcon_get_property_capability(struct extcon_dev *edev, + unsigned int id, unsigned int prop); +extern int extcon_set_property_capability(struct extcon_dev *edev, + unsigned int id, unsigned int prop); /* * Following APIs are to monitor every action of a notifier. @@ -232,30 +339,57 @@ static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, static inline void devm_extcon_dev_free(struct extcon_dev *edev) { } -static inline u32 extcon_get_state(struct extcon_dev *edev) + +static inline int extcon_get_state(struct extcon_dev *edev, unsigned int id) +{ + return 0; +} + +static inline int extcon_set_state(struct extcon_dev *edev, unsigned int id, + bool cable_state) +{ + return 0; +} + +static inline int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id, + bool cable_state) { return 0; } -static inline int extcon_set_state(struct extcon_dev *edev, u32 state) +static inline int extcon_sync(struct extcon_dev *edev, unsigned int id) { return 0; } -static inline int extcon_update_state(struct extcon_dev *edev, u32 mask, - u32 state) +static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id, + unsigned int prop, + union extcon_property_value *prop_val) +{ + return 0; +} +static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id, + unsigned int prop, + union extcon_property_value prop_val) { return 0; } -static inline int extcon_get_cable_state_(struct extcon_dev *edev, - unsigned int id) +static inline int extcon_set_property_sync(struct extcon_dev *edev, + unsigned int id, unsigned int prop, + union extcon_property_value prop_val) { return 0; } -static inline int extcon_set_cable_state_(struct extcon_dev *edev, - unsigned int id, bool cable_state) +static inline int extcon_get_property_capability(struct extcon_dev *edev, + unsigned int id, unsigned int prop) +{ + return 0; +} + +static inline int extcon_set_property_capability(struct extcon_dev *edev, + unsigned int id, unsigned int prop) { return 0; } @@ -320,4 +454,15 @@ static inline int extcon_unregister_interest(struct extcon_specific_cable_nb { return -EINVAL; } + +static inline int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id) +{ + return extcon_get_state(edev, id); +} + +static inline int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id, + bool cable_state) +{ + return extcon_set_state_sync(edev, id, cable_state); +} #endif /* __LINUX_EXTCON_H__ */ diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h index ac85f2061351..a0e03b13b449 100644 --- a/include/linux/extcon/extcon-adc-jack.h +++ b/include/linux/extcon/extcon-adc-jack.h @@ -20,8 +20,8 @@ /** * struct adc_jack_cond - condition to use an extcon state - * @state: the corresponding extcon state (if 0, this struct * denotes the last adc_jack_cond element among the array) + * @id: the unique id of each external connector * @min_adc: min adc value for this condition * @max_adc: max adc value for this condition * @@ -33,7 +33,7 @@ * because when no adc_jack_cond is met, state = 0 is automatically chosen. */ struct adc_jack_cond { - u32 state; /* extcon state value. 0 if invalid */ + unsigned int id; u32 min_adc; u32 max_adc; }; diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index f08b67238b58..ee1bed7dbfc6 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -36,6 +36,7 @@ enum phy_mode { * @power_on: powering on the phy * @power_off: powering off the phy * @set_mode: set the mode of the phy + * @reset: resetting the phy * @owner: the module owner containing the ops */ struct phy_ops { @@ -44,6 +45,7 @@ struct phy_ops { int (*power_on)(struct phy *phy); int (*power_off)(struct phy *phy); int (*set_mode)(struct phy *phy, enum phy_mode mode); + int (*reset)(struct phy *phy); struct module *owner; }; @@ -136,6 +138,7 @@ int phy_exit(struct phy *phy); int phy_power_on(struct phy *phy); int phy_power_off(struct phy *phy); int phy_set_mode(struct phy *phy, enum phy_mode mode); +int phy_reset(struct phy *phy); static inline int phy_get_bus_width(struct phy *phy) { return phy->attrs.bus_width; diff --git a/include/linux/ulpi/driver.h b/include/linux/ulpi/driver.h index 388f6e08b9d4..a7af21a55248 100644 --- a/include/linux/ulpi/driver.h +++ b/include/linux/ulpi/driver.h @@ -15,7 +15,7 @@ struct ulpi_ops; */ struct ulpi { struct ulpi_device_id id; - struct ulpi_ops *ops; + const struct ulpi_ops *ops; struct device dev; }; @@ -47,7 +47,11 @@ struct ulpi_driver { #define to_ulpi_driver(d) container_of(d, struct ulpi_driver, driver) -int ulpi_register_driver(struct ulpi_driver *drv); +/* + * use a macro to avoid include chaining to get THIS_MODULE + */ +#define ulpi_register_driver(drv) __ulpi_register_driver(drv, THIS_MODULE) +int __ulpi_register_driver(struct ulpi_driver *drv, struct module *module); void ulpi_unregister_driver(struct ulpi_driver *drv); #define module_ulpi_driver(__ulpi_driver) \ diff --git a/include/linux/ulpi/interface.h b/include/linux/ulpi/interface.h index 4de8ab491038..a2011a919eb6 100644 --- a/include/linux/ulpi/interface.h +++ b/include/linux/ulpi/interface.h @@ -4,20 +4,19 @@ #include <linux/types.h> struct ulpi; +struct device; /** * struct ulpi_ops - ULPI register access - * @dev: the interface provider * @read: read operation for ULPI register access * @write: write operation for ULPI register access */ struct ulpi_ops { - struct device *dev; - int (*read)(struct ulpi_ops *ops, u8 addr); - int (*write)(struct ulpi_ops *ops, u8 addr, u8 val); + int (*read)(struct device *dev, u8 addr); + int (*write)(struct device *dev, u8 addr, u8 val); }; -struct ulpi *ulpi_register_interface(struct device *, struct ulpi_ops *); +struct ulpi *ulpi_register_interface(struct device *, const struct ulpi_ops *); void ulpi_unregister_interface(struct ulpi *); #endif /* __LINUX_ULPI_INTERFACE_H */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 2b81b24eb5aa..4616a49a1c2e 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -220,7 +220,8 @@ struct usb_function { int (*setup)(struct usb_function *, const struct usb_ctrlrequest *); bool (*req_match)(struct usb_function *, - const struct usb_ctrlrequest *); + const struct usb_ctrlrequest *, + bool config0); void (*suspend)(struct usb_function *); void (*resume)(struct usb_function *); diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 612dbdfa388e..8e81f9eb95e4 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -346,6 +346,8 @@ struct usb_gadget_ops { * or B-Peripheral wants to take host role. * @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to * MaxPacketSize. + * @quirk_avoids_skb_reserve: udc/platform wants to avoid skb_reserve() in + * u_ether.c to improve performance. * @is_selfpowered: if the gadget is self-powered. * @deactivated: True if gadget is deactivated - in deactivated state it cannot * be connected. @@ -398,6 +400,7 @@ struct usb_gadget { unsigned quirk_altset_not_supp:1; unsigned quirk_stall_not_supp:1; unsigned quirk_zlp_not_supp:1; + unsigned quirk_avoids_skb_reserve:1; unsigned is_selfpowered:1; unsigned deactivated:1; unsigned connected:1; @@ -418,8 +421,20 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) list_for_each_entry(tmp, &(gadget)->ep_list, ep_list) /** + * usb_ep_align - returns @len aligned to ep's maxpacketsize. + * @ep: the endpoint whose maxpacketsize is used to align @len + * @len: buffer size's length to align to @ep's maxpacketsize + * + * This helper is used to align buffer's size to an ep's maxpacketsize. + */ +static inline size_t usb_ep_align(struct usb_ep *ep, size_t len) +{ + return round_up(len, (size_t)le16_to_cpu(ep->desc->wMaxPacketSize)); +} + +/** * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget - * requires quirk_ep_out_aligned_size, otherwise reguens len. + * requires quirk_ep_out_aligned_size, otherwise returns len. * @g: controller to check for quirk * @ep: the endpoint whose maxpacketsize is used to align @len * @len: buffer size's length to align to @ep's maxpacketsize @@ -430,8 +445,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) static inline size_t usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len) { - return !g->quirk_ep_out_aligned_size ? len : - round_up(len, (size_t)ep->desc->wMaxPacketSize); + return g->quirk_ep_out_aligned_size ? usb_ep_align(ep, len) : len; } /** @@ -463,6 +477,16 @@ static inline int gadget_is_zlp_supported(struct usb_gadget *g) } /** + * gadget_avoids_skb_reserve - return true iff the hardware would like to avoid + * skb_reserve to improve performance. + * @g: controller to check for quirk + */ +static inline int gadget_avoids_skb_reserve(struct usb_gadget *g) +{ + return g->quirk_avoids_skb_reserve; +} + +/** * gadget_is_dualspeed - return true iff the hardware handles high speed * @g: controller that might support both high and full speeds */ diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 245f57dbbb61..0aae1b2ee931 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -81,6 +81,8 @@ /* Sets max_sectors to 240 */ \ US_FLAG(NO_REPORT_LUNS, 0x10000000) \ /* Cannot handle REPORT_LUNS */ \ + US_FLAG(ALWAYS_SYNC, 0x20000000) \ + /* lies about caching, so always sync */ \ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; diff --git a/include/soc/at91/atmel-sfr.h b/include/soc/at91/atmel-sfr.h index 2f9bb984a4df..506ea8ffda19 100644 --- a/include/soc/at91/atmel-sfr.h +++ b/include/soc/at91/atmel-sfr.h @@ -13,6 +13,20 @@ #ifndef _LINUX_MFD_SYSCON_ATMEL_SFR_H #define _LINUX_MFD_SYSCON_ATMEL_SFR_H +#define AT91_SFR_DDRCFG 0x04 /* DDR Configuration Register */ +/* 0x08 ~ 0x0c: Reserved */ +#define AT91_SFR_OHCIICR 0x10 /* OHCI INT Configuration Register */ +#define AT91_SFR_OHCIISR 0x14 /* OHCI INT Status Register */ #define AT91_SFR_I2SCLKSEL 0x90 /* I2SC Register */ +/* Field definitions */ +#define AT91_OHCIICR_SUSPEND_A BIT(8) +#define AT91_OHCIICR_SUSPEND_B BIT(9) +#define AT91_OHCIICR_SUSPEND_C BIT(10) + +#define AT91_OHCIICR_USB_SUSPEND (AT91_OHCIICR_SUSPEND_A | \ + AT91_OHCIICR_SUSPEND_B | \ + AT91_OHCIICR_SUSPEND_C) + + #endif /* _LINUX_MFD_SYSCON_ATMEL_SFR_H */ diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h index 108dd7997014..acc63697a0cc 100644 --- a/include/uapi/linux/usb/functionfs.h +++ b/include/uapi/linux/usb/functionfs.h @@ -21,6 +21,8 @@ enum functionfs_flags { FUNCTIONFS_HAS_MS_OS_DESC = 8, FUNCTIONFS_VIRTUAL_ADDR = 16, FUNCTIONFS_EVENTFD = 32, + FUNCTIONFS_ALL_CTRL_RECIP = 64, + FUNCTIONFS_CONFIG0_SETUP = 128, }; /* Descriptor of an non-audio endpoint */ |
