diff options
42 files changed, 2414 insertions, 472 deletions
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index 6edc3b616e98..1fe6dde98499 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -5,7 +5,9 @@ Required properties: - reg : should specify localbus address and size used for the chip, and hardware ECC controller if available. If the hardware ECC is PMECC, it should contain address and size for - PMECC, PMECC Error Location controller and ROM which has lookup tables. + PMECC and PMECC Error Location controller. + The PMECC lookup table address and size in ROM is optional. If not + specified, driver will build it in runtime. - atmel,nand-addr-offset : offset for the address latch. - atmel,nand-cmd-offset : offset for the command latch. - #address-cells, #size-cells : Must be present if the device has sub-nodes @@ -27,7 +29,7 @@ Optional properties: are: 512, 1024. - atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM for different sector size. First one is for sector size 512, the next is for - sector size 1024. + sector size 1024. If not specified, driver will build the table in runtime. - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false - Nand Flash Controller(NFC) is a slave driver under Atmel nand flash diff --git a/Documentation/devicetree/bindings/mtd/diskonchip.txt b/Documentation/devicetree/bindings/mtd/diskonchip.txt new file mode 100644 index 000000000000..3e13bfdbea5b --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/diskonchip.txt @@ -0,0 +1,15 @@ +M-Systems and Sandisk DiskOnChip devices + +M-System DiskOnChip G3 +====================== +The Sandisk (formerly M-Systems) docg3 is a nand device of 64M to 256MB. + +Required properties: + - compatible: should be "m-systems,diskonchip-g3" + - reg: register base and size + +Example: + docg3: flash@0 { + compatible = "m-systems,diskonchip-g3"; + reg = <0x0 0x2000>; + }; diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt index 36ef07d3c90f..af8915b41ccf 100644 --- a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt @@ -11,8 +11,8 @@ Required properties: are made in native endianness. - #address-cells, #size-cells : Must be present if the device has sub-nodes representing partitions. -- gpios : specifies the gpio pins to control the NAND device. nwp is an - optional gpio and may be set to 0 if not present. +- gpios : Specifies the GPIO pins to control the NAND device. The order of + GPIO references is: RDY, nCE, ALE, CLE, and an optional nWP. Optional properties: - bank-width : Width (in bytes) of the device. If not present, the width @@ -35,11 +35,11 @@ gpio-nand@1,0 { reg = <1 0x0000 0x2>; #address-cells = <1>; #size-cells = <1>; - gpios = <&banka 1 0 /* rdy */ - &banka 2 0 /* nce */ - &banka 3 0 /* ale */ - &banka 4 0 /* cle */ - 0 /* nwp */>; + gpios = <&banka 1 0>, /* RDY */ + <&banka 2 0>, /* nCE */ + <&banka 3 0>, /* ALE */ + <&banka 4 0>, /* CLE */ + <0>; /* nWP */ partition@0 { ... diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt new file mode 100644 index 000000000000..0273adb8638c --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -0,0 +1,45 @@ +Allwinner NAND Flash Controller (NFC) + +Required properties: +- compatible : "allwinner,sun4i-a10-nand". +- reg : shall contain registers location and length for data and reg. +- interrupts : shall define the nand controller interrupt. +- #address-cells: shall be set to 1. Encode the nand CS. +- #size-cells : shall be set to 0. +- clocks : shall reference nand controller clocks. +- clock-names : nand controller internal clock names. Shall contain : + * "ahb" : AHB gating clock + * "mod" : nand controller clock + +Optional children nodes: +Children nodes represent the available nand chips. + +Optional properties: +- allwinner,rb : shall contain the native Ready/Busy ids. + or +- rb-gpios : shall contain the gpios used as R/B pins. +- nand-ecc-mode : one of the supported ECC modes ("hw", "hw_syndrome", "soft", + "soft_bch" or "none") + +see Documentation/devicetree/mtd/nand.txt for generic bindings. + + +Examples: +nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <0 37 1>; + clocks = <&ahb_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + status = "okay"; + + nand@0 { + reg = <0>; + allwinner,rb = <0>; + nand-ecc-mode = "soft_bch"; + }; +}; diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c index 3d5d792d5cb2..410c39749872 100644 --- a/drivers/memory/fsl_ifc.c +++ b/drivers/memory/fsl_ifc.c @@ -61,7 +61,7 @@ int fsl_ifc_find(phys_addr_t addr_base) if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs) return -ENODEV; - for (i = 0; i < ARRAY_SIZE(fsl_ifc_ctrl_dev->regs->cspr_cs); i++) { + for (i = 0; i < fsl_ifc_ctrl_dev->banks; i++) { u32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr); if (cspr & CSPR_V && (cspr & CSPR_BA) == convert_ifc_address(addr_base)) @@ -213,7 +213,7 @@ static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data) static int fsl_ifc_ctrl_probe(struct platform_device *dev) { int ret = 0; - + int version, banks; dev_info(&dev->dev, "Freescale Integrated Flash Controller\n"); @@ -231,6 +231,15 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev) goto err; } + version = ioread32be(&fsl_ifc_ctrl_dev->regs->ifc_rev) & + FSL_IFC_VERSION_MASK; + banks = (version == FSL_IFC_VERSION_1_0_0) ? 4 : 8; + dev_info(&dev->dev, "IFC version %d.%d, %d banks\n", + version >> 24, (version >> 16) & 0xf, banks); + + fsl_ifc_ctrl_dev->version = version; + fsl_ifc_ctrl_dev->banks = banks; + /* get the Controller level irq */ fsl_ifc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0); if (fsl_ifc_ctrl_dev->irq == NO_IRQ) { diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 94b821042d9d..71fea895ce38 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -133,7 +133,7 @@ config MTD_OF_PARTS help This provides a partition parsing function which derives the partition map from the children of the flash node, - as described in Documentation/devicetree/booting-without-of.txt. + as described in Documentation/devicetree/bindings/mtd/partition.txt. config MTD_AR7_PARTS tristate "TI AR7 partitioning support" diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index 8057f52a45b7..cc13ea5ce4d5 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -15,8 +15,12 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -/* 10 parts were found on sflash on Netgear WNDR4500 */ -#define BCM47XXPART_MAX_PARTS 12 +/* + * NAND flash on Netgear R6250 was verified to contain 15 partitions. + * This will result in allocating too big array for some old devices, but the + * memory will be freed soon anyway (see mtd_device_parse_register). + */ +#define BCM47XXPART_MAX_PARTS 20 /* * Amount of bytes we read when analyzing each block of flash memory. @@ -168,18 +172,26 @@ static int bcm47xxpart_parse(struct mtd_info *master, i++; } - bcm47xxpart_add_part(&parts[curr_part++], "linux", - offset + trx->offset[i], 0); - i++; + if (trx->offset[i]) { + bcm47xxpart_add_part(&parts[curr_part++], + "linux", + offset + trx->offset[i], + 0); + i++; + } /* * Pure rootfs size is known and can be calculated as: * trx->length - trx->offset[i]. We don't fill it as * we want to have jffs2 (overlay) in the same mtd. */ - bcm47xxpart_add_part(&parts[curr_part++], "rootfs", - offset + trx->offset[i], 0); - i++; + if (trx->offset[i]) { + bcm47xxpart_add_part(&parts[curr_part++], + "rootfs", + offset + trx->offset[i], + 0); + i++; + } last_trx_part = curr_part - 1; diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 3096f3ded3ad..286b97a304cf 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -2654,8 +2654,7 @@ static void cfi_intelext_destroy(struct mtd_info *mtd) kfree(cfi); for (i = 0; i < mtd->numeraseregions; i++) { region = &mtd->eraseregions[i]; - if (region->lockmap) - kfree(region->lockmap); + kfree(region->lockmap); } kfree(mtd->eraseregions); } diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 72346048532d..448ce42f951e 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/errno.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/string.h> #include <linux/slab.h> @@ -1655,22 +1656,21 @@ static int dbg_flashctrl_show(struct seq_file *s, void *p) { struct docg3 *docg3 = (struct docg3 *)s->private; - int pos = 0; u8 fctrl; mutex_lock(&docg3->cascade->lock); fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); mutex_unlock(&docg3->cascade->lock); - pos += seq_printf(s, - "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n", - fctrl, - fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-", - fctrl & DOC_CTRL_CE ? "active" : "inactive", - fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-", - fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-", - fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready"); - return pos; + seq_printf(s, "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n", + fctrl, + fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-", + fctrl & DOC_CTRL_CE ? "active" : "inactive", + fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-", + fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-", + fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready"); + + return 0; } DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show); @@ -1678,58 +1678,56 @@ static int dbg_asicmode_show(struct seq_file *s, void *p) { struct docg3 *docg3 = (struct docg3 *)s->private; - int pos = 0, pctrl, mode; + int pctrl, mode; mutex_lock(&docg3->cascade->lock); pctrl = doc_register_readb(docg3, DOC_ASICMODE); mode = pctrl & 0x03; mutex_unlock(&docg3->cascade->lock); - pos += seq_printf(s, - "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (", - pctrl, - pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0, - pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0, - pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0, - pctrl & DOC_ASICMODE_MDWREN ? 1 : 0, - pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0, - mode >> 1, mode & 0x1); + seq_printf(s, + "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (", + pctrl, + pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0, + pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0, + pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0, + pctrl & DOC_ASICMODE_MDWREN ? 1 : 0, + pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0, + mode >> 1, mode & 0x1); switch (mode) { case DOC_ASICMODE_RESET: - pos += seq_puts(s, "reset"); + seq_puts(s, "reset"); break; case DOC_ASICMODE_NORMAL: - pos += seq_puts(s, "normal"); + seq_puts(s, "normal"); break; case DOC_ASICMODE_POWERDOWN: - pos += seq_puts(s, "powerdown"); + seq_puts(s, "powerdown"); break; } - pos += seq_puts(s, ")\n"); - return pos; + seq_puts(s, ")\n"); + return 0; } DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show); static int dbg_device_id_show(struct seq_file *s, void *p) { struct docg3 *docg3 = (struct docg3 *)s->private; - int pos = 0; int id; mutex_lock(&docg3->cascade->lock); id = doc_register_readb(docg3, DOC_DEVICESELECT); mutex_unlock(&docg3->cascade->lock); - pos += seq_printf(s, "DeviceId = %d\n", id); - return pos; + seq_printf(s, "DeviceId = %d\n", id); + return 0; } DEBUGFS_RO_ATTR(device_id, dbg_device_id_show); static int dbg_protection_show(struct seq_file *s, void *p) { struct docg3 *docg3 = (struct docg3 *)s->private; - int pos = 0; int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high; mutex_lock(&docg3->cascade->lock); @@ -1742,45 +1740,40 @@ static int dbg_protection_show(struct seq_file *s, void *p) dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH); mutex_unlock(&docg3->cascade->lock); - pos += seq_printf(s, "Protection = 0x%02x (", - protect); + seq_printf(s, "Protection = 0x%02x (", protect); if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK) - pos += seq_puts(s, "FOUNDRY_OTP_LOCK,"); + seq_puts(s, "FOUNDRY_OTP_LOCK,"); if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK) - pos += seq_puts(s, "CUSTOMER_OTP_LOCK,"); + seq_puts(s, "CUSTOMER_OTP_LOCK,"); if (protect & DOC_PROTECT_LOCK_INPUT) - pos += seq_puts(s, "LOCK_INPUT,"); + seq_puts(s, "LOCK_INPUT,"); if (protect & DOC_PROTECT_STICKY_LOCK) - pos += seq_puts(s, "STICKY_LOCK,"); + seq_puts(s, "STICKY_LOCK,"); if (protect & DOC_PROTECT_PROTECTION_ENABLED) - pos += seq_puts(s, "PROTECTION ON,"); + seq_puts(s, "PROTECTION ON,"); if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK) - pos += seq_puts(s, "IPL_DOWNLOAD_LOCK,"); + seq_puts(s, "IPL_DOWNLOAD_LOCK,"); if (protect & DOC_PROTECT_PROTECTION_ERROR) - pos += seq_puts(s, "PROTECT_ERR,"); + seq_puts(s, "PROTECT_ERR,"); else - pos += seq_puts(s, "NO_PROTECT_ERR"); - pos += seq_puts(s, ")\n"); - - pos += seq_printf(s, "DPS0 = 0x%02x : " - "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, " - "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n", - dps0, dps0_low, dps0_high, - !!(dps0 & DOC_DPS_OTP_PROTECTED), - !!(dps0 & DOC_DPS_READ_PROTECTED), - !!(dps0 & DOC_DPS_WRITE_PROTECTED), - !!(dps0 & DOC_DPS_HW_LOCK_ENABLED), - !!(dps0 & DOC_DPS_KEY_OK)); - pos += seq_printf(s, "DPS1 = 0x%02x : " - "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, " - "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n", - dps1, dps1_low, dps1_high, - !!(dps1 & DOC_DPS_OTP_PROTECTED), - !!(dps1 & DOC_DPS_READ_PROTECTED), - !!(dps1 & DOC_DPS_WRITE_PROTECTED), - !!(dps1 & DOC_DPS_HW_LOCK_ENABLED), - !!(dps1 & DOC_DPS_KEY_OK)); - return pos; + seq_puts(s, "NO_PROTECT_ERR"); + seq_puts(s, ")\n"); + + seq_printf(s, "DPS0 = 0x%02x : Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n", + dps0, dps0_low, dps0_high, + !!(dps0 & DOC_DPS_OTP_PROTECTED), + !!(dps0 & DOC_DPS_READ_PROTECTED), + !!(dps0 & DOC_DPS_WRITE_PROTECTED), + !!(dps0 & DOC_DPS_HW_LOCK_ENABLED), + !!(dps0 & DOC_DPS_KEY_OK)); + seq_printf(s, "DPS1 = 0x%02x : Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n", + dps1, dps1_low, dps1_high, + !!(dps1 & DOC_DPS_OTP_PROTECTED), + !!(dps1 & DOC_DPS_READ_PROTECTED), + !!(dps1 & DOC_DPS_WRITE_PROTECTED), + !!(dps1 & DOC_DPS_HW_LOCK_ENABLED), + !!(dps1 & DOC_DPS_KEY_OK)); + return 0; } DEBUGFS_RO_ATTR(protection, dbg_protection_show); @@ -2126,9 +2119,18 @@ static int __exit docg3_release(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static struct of_device_id docg3_dt_ids[] = { + { .compatible = "m-systems,diskonchip-g3" }, + {} +}; +MODULE_DEVICE_TABLE(of, docg3_dt_ids); +#endif + static struct platform_driver g3_driver = { .driver = { .name = "docg3", + .of_match_table = of_match_ptr(docg3_dt_ids), }, .suspend = docg3_suspend, .resume = docg3_resume, diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index ed827cf894e4..85e35467fba6 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -128,13 +128,10 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len, struct spi_device *spi = flash->spi; struct spi_transfer t[2]; struct spi_message m; - int dummy = nor->read_dummy; - int ret; + unsigned int dummy = nor->read_dummy; - /* Wait till previous write/erase is done. */ - ret = nor->wait_till_ready(nor); - if (ret) - return ret; + /* convert the dummy cycles to the number of bytes */ + dummy /= 8; spi_message_init(&m); memset(t, 0, (sizeof t)); @@ -160,21 +157,10 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len, static int m25p80_erase(struct spi_nor *nor, loff_t offset) { struct m25p *flash = nor->priv; - int ret; dev_dbg(nor->dev, "%dKiB at 0x%08x\n", flash->mtd.erasesize / 1024, (u32)offset); - /* Wait until finished previous write command. */ - ret = nor->wait_till_ready(nor); - if (ret) - return ret; - - /* Send write enable, then erase commands. */ - ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0); - if (ret) - return ret; - /* Set up command buffer. */ flash->command[0] = nor->erase_opcode; m25p_addr2cmd(nor, offset, flash->command); @@ -260,7 +246,6 @@ static int m25p_remove(struct spi_device *spi) return mtd_device_unregister(&flash->mtd); } - /* * XXX This needs to be kept in sync with spi_nor_ids. We can't share * it with spi-nor, because if this is built as a module then modpost @@ -287,7 +272,7 @@ static const struct spi_device_id m25p_ids[] = { {"s25fl512s"}, {"s70fl01gs"}, {"s25sl12800"}, {"s25sl12801"}, {"s25fl129p0"}, {"s25fl129p1"}, {"s25sl004a"}, {"s25sl008a"}, {"s25sl016a"}, {"s25sl032a"}, {"s25sl064a"}, {"s25fl008k"}, - {"s25fl016k"}, {"s25fl064k"}, + {"s25fl016k"}, {"s25fl064k"}, {"s25fl132k"}, {"sst25vf040b"},{"sst25vf080b"},{"sst25vf016b"},{"sst25vf032b"}, {"sst25vf064c"},{"sst25wf512"}, {"sst25wf010"}, {"sst25wf020"}, {"sst25wf040"}, @@ -300,17 +285,16 @@ static const struct spi_device_id m25p_ids[] = { {"m45pe10"}, {"m45pe80"}, {"m45pe16"}, {"m25pe20"}, {"m25pe80"}, {"m25pe16"}, {"m25px16"}, {"m25px32"}, {"m25px32-s0"}, {"m25px32-s1"}, - {"m25px64"}, + {"m25px64"}, {"m25px80"}, {"w25x10"}, {"w25x20"}, {"w25x40"}, {"w25x80"}, {"w25x16"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"}, - {"w25x64"}, {"w25q64"}, {"w25q128"}, {"w25q80"}, - {"w25q80bl"}, {"w25q128"}, {"w25q256"}, {"cat25c11"}, + {"w25x64"}, {"w25q64"}, {"w25q80"}, {"w25q80bl"}, + {"w25q128"}, {"w25q256"}, {"cat25c11"}, {"cat25c03"}, {"cat25c09"}, {"cat25c17"}, {"cat25128"}, { }, }; MODULE_DEVICE_TABLE(spi, m25p_ids); - static struct spi_driver m25p80_driver = { .driver = { .name = "m25p80", diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index dd22ce2cc9ad..0099aba72a8b 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -149,7 +149,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) { struct dataflash *priv = mtd->priv; struct spi_device *spi = priv->spi; - struct spi_transfer x = { .tx_dma = 0, }; + struct spi_transfer x = { }; struct spi_message msg; unsigned blocksize = priv->page_size << 3; uint8_t *command; @@ -235,7 +235,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct dataflash *priv = mtd->priv; - struct spi_transfer x[2] = { { .tx_dma = 0, }, }; + struct spi_transfer x[2] = { }; struct spi_message msg; unsigned int addr; uint8_t *command; @@ -301,7 +301,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, { struct dataflash *priv = mtd->priv; struct spi_device *spi = priv->spi; - struct spi_transfer x[2] = { { .tx_dma = 0, }, }; + struct spi_transfer x[2] = { }; struct spi_message msg; unsigned int pageaddr, addr, offset, writelen; size_t remaining = len; diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index effd9a4ef7ee..8b66e52ca3cc 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -17,7 +17,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <asm/io.h> +#include <linux/io.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/list.h> diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index f02603e1bfeb..708b7e8c8b18 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -812,8 +812,7 @@ static int __init init_pmc551(void) } /* Exited early, reference left over */ - if (PCI_Device) - pci_dev_put(PCI_Device); + pci_dev_put(PCI_Device); if (!pmc551list) { printk(KERN_NOTICE "pmc551: not detected\n"); diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c index 487e64f411a5..1388c8d7f309 100644 --- a/drivers/mtd/inftlmount.c +++ b/drivers/mtd/inftlmount.c @@ -518,7 +518,7 @@ void INFTL_dumpVUchains(struct INFTLrecord *s) pr_debug("INFTL Virtual Unit Chains:\n"); for (logical = 0; logical < s->nb_blocks; logical++) { block = s->VUtable[logical]; - if (block > s->nb_blocks) + if (block >= s->nb_blocks) continue; pr_debug(" LOGICAL %d --> %d ", logical, block); for (i = 0; i < s->nb_blocks; i++) { diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index 6ea51e549045..41730feeace8 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -126,7 +126,6 @@ static const char * const part_probe_types[] = { static int bfin_flash_probe(struct platform_device *pdev) { - int ret; struct physmap_flash_data *pdata = dev_get_platdata(&pdev->dev); struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1); diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 991d0cb871f0..f35cd2081314 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -47,14 +47,12 @@ static int of_flash_remove(struct platform_device *dev) return 0; dev_set_drvdata(&dev->dev, NULL); - if (info->cmtd != info->list[0].mtd) { + if (info->cmtd) { mtd_device_unregister(info->cmtd); - mtd_concat_destroy(info->cmtd); + if (info->cmtd != info->list[0].mtd) + mtd_concat_destroy(info->cmtd); } - if (info->cmtd) - mtd_device_unregister(info->cmtd); - for (i = 0; i < info->list_size; i++) { if (info->list[i].mtd) map_destroy(info->list[i].mtd); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index dd10646982ae..7d0150d20432 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -75,10 +75,12 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR boards, the scratch register is at 0xFF108018. config MTD_NAND_GPIO - tristate "GPIO NAND Flash driver" + tristate "GPIO assisted NAND Flash driver" depends on GPIOLIB help - This enables a GPIO based NAND flash driver. + This enables a NAND flash driver where control signals are + connected to GPIO pins, and commands and data are communicated + via a memory mapped interface. config MTD_NAND_AMS_DELTA tristate "NAND Flash device on Amstrad E3" @@ -516,4 +518,10 @@ config MTD_NAND_XWAY Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached to the External Bus Unit (EBU). +config MTD_NAND_SUNXI + tristate "Support for NAND on Allwinner SoCs" + depends on ARCH_SUNXI + help + Enables support for NAND Flash chips on Allwinner SoCs. + endif # MTD_NAND diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 9c847e469ca7..bd38f21d2e28 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ +obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o nand-objs := nand_base.o nand_bbt.o nand_timings.o diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 84c38f3c65b0..a345e7b2463a 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -92,7 +92,7 @@ static struct nand_ecclayout atmel_oobinfo_small = { struct atmel_nfc { void __iomem *base_cmd_regs; void __iomem *hsmc_regs; - void __iomem *sram_bank0; + void *sram_bank0; dma_addr_t sram_bank0_phys; bool use_nfc_sram; bool write_by_sram; @@ -105,7 +105,7 @@ struct atmel_nfc { struct completion comp_xfer_done; /* Point to the sram bank which include readed data via NFC */ - void __iomem *data_in_sram; + void *data_in_sram; bool will_write_sram; }; static struct atmel_nfc nand_nfc; @@ -127,6 +127,7 @@ struct atmel_nand_host { bool has_pmecc; u8 pmecc_corr_cap; u16 pmecc_sector_size; + bool has_no_lookup_table; u32 pmecc_lookup_table_offset; u32 pmecc_lookup_table_offset_512; u32 pmecc_lookup_table_offset_1024; @@ -256,26 +257,6 @@ static int atmel_nand_set_enable_ready_pins(struct mtd_info *mtd) return res; } -static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size) -{ - int i; - u32 *t = trg; - const __iomem u32 *s = src; - - for (i = 0; i < (size >> 2); i++) - *t++ = readl_relaxed(s++); -} - -static void memcpy32_toio(void __iomem *trg, const void *src, int size) -{ - int i; - u32 __iomem *t = trg; - const u32 *s = src; - - for (i = 0; i < (size >> 2); i++) - writel_relaxed(*s++, t++); -} - /* * Minimal-overhead PIO for data access. */ @@ -285,7 +266,7 @@ static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len) struct atmel_nand_host *host = nand_chip->priv; if (host->nfc && host->nfc->use_nfc_sram && host->nfc->data_in_sram) { - memcpy32_fromio(buf, host->nfc->data_in_sram, len); + memcpy(buf, host->nfc->data_in_sram, len); host->nfc->data_in_sram += len; } else { __raw_readsb(nand_chip->IO_ADDR_R, buf, len); @@ -298,7 +279,7 @@ static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len) struct atmel_nand_host *host = nand_chip->priv; if (host->nfc && host->nfc->use_nfc_sram && host->nfc->data_in_sram) { - memcpy32_fromio(buf, host->nfc->data_in_sram, len); + memcpy(buf, host->nfc->data_in_sram, len); host->nfc->data_in_sram += len; } else { __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2); @@ -1112,12 +1093,66 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host, return 0; } +static inline int deg(unsigned int poly) +{ + /* polynomial degree is the most-significant bit index */ + return fls(poly) - 1; +} + +static int build_gf_tables(int mm, unsigned int poly, + int16_t *index_of, int16_t *alpha_to) +{ + unsigned int i, x = 1; + const unsigned int k = 1 << deg(poly); + unsigned int nn = (1 << mm) - 1; + + /* primitive polynomial must be of degree m */ + if (k != (1u << mm)) + return -EINVAL; + + for (i = 0; i < nn; i++) { + alpha_to[i] = x; + index_of[x] = i; + if (i && (x == 1)) + /* polynomial is not primitive (a^i=1 with 0<i<2^m-1) */ + return -EINVAL; + x <<= 1; + if (x & k) + x ^= poly; + } + alpha_to[nn] = 1; + index_of[0] = 0; + + return 0; +} + +static uint16_t *create_lookup_table(struct device *dev, int sector_size) +{ + int degree = (sector_size == 512) ? + PMECC_GF_DIMENSION_13 : + PMECC_GF_DIMENSION_14; + unsigned int poly = (sector_size == 512) ? + PMECC_GF_13_PRIMITIVE_POLY : + PMECC_GF_14_PRIMITIVE_POLY; + int table_size = (sector_size == 512) ? + PMECC_LOOKUP_TABLE_SIZE_512 : + PMECC_LOOKUP_TABLE_SIZE_1024; + + int16_t *addr = devm_kzalloc(dev, 2 * table_size * sizeof(uint16_t), + GFP_KERNEL); + if (addr && build_gf_tables(degree, poly, addr, addr + table_size)) + return NULL; + + return addr; +} + static int atmel_pmecc_nand_init_params(struct platform_device *pdev, struct atmel_nand_host *host) { struct mtd_info *mtd = &host->mtd; struct nand_chip *nand_chip = &host->nand_chip; struct resource *regs, *regs_pmerr, *regs_rom; + uint16_t *galois_table; int cap, sector_size, err_no; err_no = pmecc_choose_ecc(host, &cap, §or_size); @@ -1163,8 +1198,24 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev, regs_rom = platform_get_resource(pdev, IORESOURCE_MEM, 3); host->pmecc_rom_base = devm_ioremap_resource(&pdev->dev, regs_rom); if (IS_ERR(host->pmecc_rom_base)) { - err_no = PTR_ERR(host->pmecc_rom_base); - goto err; + if (!host->has_no_lookup_table) + /* Don't display the information again */ + dev_err(host->dev, "Can not get I/O resource for ROM, will build a lookup table in runtime!\n"); + + host->has_no_lookup_table = true; + } + + if (host->has_no_lookup_table) { + /* Build the look-up table in runtime */ + galois_table = create_lookup_table(host->dev, sector_size); + if (!galois_table) { + dev_err(host->dev, "Failed to build a lookup table in runtime!\n"); + err_no = -EINVAL; + goto err; + } + + host->pmecc_rom_base = (void __iomem *)galois_table; + host->pmecc_lookup_table_offset = 0; } nand_chip->ecc.size = sector_size; @@ -1501,8 +1552,10 @@ static int atmel_of_init_port(struct atmel_nand_host *host, if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset", offset, 2) != 0) { - dev_err(host->dev, "Cannot get PMECC lookup table offset\n"); - return -EINVAL; + dev_err(host->dev, "Cannot get PMECC lookup table offset, will build a lookup table in runtime.\n"); + host->has_no_lookup_table = true; + /* Will build a lookup table and initialize the offset later */ + return 0; } if (!offset[0] && !offset[1]) { dev_err(host->dev, "Invalid PMECC lookup table offset\n"); @@ -1899,7 +1952,7 @@ static int nfc_sram_write_page(struct mtd_info *mtd, struct nand_chip *chip, int cfg, len; int status = 0; struct atmel_nand_host *host = chip->priv; - void __iomem *sram = host->nfc->sram_bank0 + nfc_get_sram_off(host); + void *sram = host->nfc->sram_bank0 + nfc_get_sram_off(host); /* Subpage write is not supported */ if (offset || (data_len < mtd->writesize)) @@ -1910,14 +1963,14 @@ static int nfc_sram_write_page(struct mtd_info *mtd, struct nand_chip *chip, if (use_dma) { if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) != 0) /* Fall back to use cpu copy */ - memcpy32_toio(sram, buf, len); + memcpy(sram, buf, len); } else { - memcpy32_toio(sram, buf, len); + memcpy(sram, buf, len); } cfg = nfc_readl(host->nfc->hsmc_regs, CFG); if (unlikely(raw) && oob_required) { - memcpy32_toio(sram + len, chip->oob_poi, mtd->oobsize); + memcpy(sram + len, chip->oob_poi, mtd->oobsize); len += mtd->oobsize; nfc_writel(host->nfc->hsmc_regs, CFG, cfg | NFC_CFG_WSPARE); } else { @@ -2260,7 +2313,8 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev) nfc_sram = platform_get_resource(pdev, IORESOURCE_MEM, 2); if (nfc_sram) { - nfc->sram_bank0 = devm_ioremap_resource(&pdev->dev, nfc_sram); + nfc->sram_bank0 = (void * __force) + devm_ioremap_resource(&pdev->dev, nfc_sram); if (IS_ERR(nfc->sram_bank0)) { dev_warn(&pdev->dev, "Fail to ioremap the NFC sram with error: %ld. So disable NFC sram.\n", PTR_ERR(nfc->sram_bank0)); diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h index 8a1e9a686759..d4035e335ad8 100644 --- a/drivers/mtd/nand/atmel_nand_ecc.h +++ b/drivers/mtd/nand/atmel_nand_ecc.h @@ -142,6 +142,10 @@ #define PMECC_GF_DIMENSION_13 13 #define PMECC_GF_DIMENSION_14 14 +/* Primitive Polynomial used by PMECC */ +#define PMECC_GF_13_PRIMITIVE_POLY 0x201b +#define PMECC_GF_14_PRIMITIVE_POLY 0x4443 + #define PMECC_LOOKUP_TABLE_SIZE_512 0x2000 #define PMECC_LOOKUP_TABLE_SIZE_1024 0x4000 diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 4e66726da9aa..9a0f45f1d932 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -529,50 +529,6 @@ static int cafe_nand_write_page_lowlevel(struct mtd_info *mtd, return 0; } -static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, - uint32_t offset, int data_len, const uint8_t *buf, - int oob_required, int page, int cached, int raw) -{ - int status; - - chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); - - if (unlikely(raw)) - status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required); - else - status = chip->ecc.write_page(mtd, chip, buf, oob_required); - - if (status < 0) - return status; - - /* - * Cached progamming disabled for now, Not sure if its worth the - * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s) - */ - cached = 0; - - if (!cached || !(chip->options & NAND_CACHEPRG)) { - - chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); - status = chip->waitfunc(mtd, chip); - /* - * See if operation failed and additional status checks are - * available - */ - if ((status & NAND_STATUS_FAIL) && (chip->errstat)) - status = chip->errstat(mtd, chip, FL_WRITING, status, - page); - - if (status & NAND_STATUS_FAIL) - return -EIO; - } else { - chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1); - status = chip->waitfunc(mtd, chip); - } - - return 0; -} - static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) { return 0; @@ -800,7 +756,6 @@ static int cafe_nand_probe(struct pci_dev *pdev, cafe->nand.ecc.hwctl = (void *)cafe_nand_bug; cafe->nand.ecc.calculate = (void *)cafe_nand_bug; cafe->nand.ecc.correct = (void *)cafe_nand_bug; - cafe->nand.write_page = cafe_nand_write_page; cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel; cafe->nand.ecc.write_oob = cafe_nand_write_oob; cafe->nand.ecc.read_page = cafe_nand_read_page; diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index b9ef7a6bba42..4c05f4f6a5c6 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -31,7 +31,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/fsl_ifc.h> -#define FSL_IFC_V1_1_0 0x01010000 #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */ #define IFC_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait @@ -877,7 +876,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) struct fsl_ifc_regs __iomem *ifc = ctrl->regs; struct nand_chip *chip = &priv->chip; struct nand_ecclayout *layout; - u32 csor, ver; + u32 csor; /* Fill in fsl_ifc_mtd structure */ priv->mtd.priv = chip; @@ -984,8 +983,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->ecc.mode = NAND_ECC_SOFT; } - ver = ioread32be(&ifc->ifc_rev); - if (ver == FSL_IFC_V1_1_0) + if (ctrl->version == FSL_IFC_VERSION_1_1_0) fsl_ifc_sram_init(priv); return 0; @@ -1045,12 +1043,12 @@ static int fsl_ifc_nand_probe(struct platform_device *dev) } /* find which chip select it is connected to */ - for (bank = 0; bank < FSL_IFC_BANK_COUNT; bank++) { + for (bank = 0; bank < fsl_ifc_ctrl_dev->banks; bank++) { if (match_bank(ifc, bank, res.start)) break; } - if (bank >= FSL_IFC_BANK_COUNT) { + if (bank >= fsl_ifc_ctrl_dev->banks) { dev_err(&dev->dev, "%s: address did not match any chip selects\n", __func__); return -ENODEV; diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c index 918283999a4b..73c4048c3a56 100644 --- a/drivers/mtd/nand/gpio.c +++ b/drivers/mtd/nand/gpio.c @@ -8,7 +8,9 @@ * * © 2004 Simtec Electronics * - * Device driver for NAND connected via GPIO + * Device driver for NAND flash that uses a memory mapped interface to + * read/write the NAND commands and data, and GPIO pins for control signals + * (the DT binding refers to this as "GPIO assisted NAND flash") * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 87e658ce23ef..27f272ed502a 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -1353,3 +1353,156 @@ int gpmi_read_page(struct gpmi_nand_data *this, set_dma_type(this, DMA_FOR_READ_ECC_PAGE); return start_dma_with_bch_irq(this, desc); } + +/** + * gpmi_copy_bits - copy bits from one memory region to another + * @dst: destination buffer + * @dst_bit_off: bit offset we're starting to write at + * @src: source buffer + * @src_bit_off: bit offset we're starting to read from + * @nbits: number of bits to copy + * + * This functions copies bits from one memory region to another, and is used by + * the GPMI driver to copy ECC sections which are not guaranteed to be byte + * aligned. + * + * src and dst should not overlap. + * + */ +void gpmi_copy_bits(u8 *dst, size_t dst_bit_off, + const u8 *src, size_t src_bit_off, + size_t nbits) +{ + size_t i; + size_t nbytes; + u32 src_buffer = 0; + size_t bits_in_src_buffer = 0; + + if (!nbits) + return; + + /* + * Move src and dst pointers to the closest byte pointer and store bit + * offsets within a byte. + */ + src += src_bit_off / 8; + src_bit_off %= 8; + + dst += dst_bit_off / 8; + dst_bit_off %= 8; + + /* + * Initialize the src_buffer value with bits available in the first + * byte of data so that we end up with a byte aligned src pointer. + */ + if (src_bit_off) { + src_buffer = src[0] >> src_bit_off; + if (nbits >= (8 - src_bit_off)) { + bits_in_src_buffer += 8 - src_bit_off; + } else { + src_buffer &= GENMASK(nbits - 1, 0); + bits_in_src_buffer += nbits; + } + nbits -= bits_in_src_buffer; + src++; + } + + /* Calculate the number of bytes that can be copied from src to dst. */ + nbytes = nbits / 8; + + /* Try to align dst to a byte boundary. */ + if (dst_bit_off) { + if (bits_in_src_buffer < (8 - dst_bit_off) && nbytes) { + src_buffer |= src[0] << bits_in_src_buffer; + bits_in_src_buffer += 8; + src++; + nbytes--; + } + + if (bits_in_src_buffer >= (8 - dst_bit_off)) { + dst[0] &= GENMASK(dst_bit_off - 1, 0); + dst[0] |= src_buffer << dst_bit_off; + src_buffer >>= (8 - dst_bit_off); + bits_in_src_buffer -= (8 - dst_bit_off); + dst_bit_off = 0; + dst++; + if (bits_in_src_buffer > 7) { + bits_in_src_buffer -= 8; + dst[0] = src_buffer; + dst++; + src_buffer >>= 8; + } + } + } + + if (!bits_in_src_buffer && !dst_bit_off) { + /* + * Both src and dst pointers are byte aligned, thus we can + * just use the optimized memcpy function. + */ + if (nbytes) + memcpy(dst, src, nbytes); + } else { + /* + * src buffer is not byte aligned, hence we have to copy each + * src byte to the src_buffer variable before extracting a byte + * to store in dst. + */ + for (i = 0; i < nbytes; i++) { + src_buffer |= src[i] << bits_in_src_buffer; + dst[i] = src_buffer; + src_buffer >>= 8; + } + } + /* Update dst and src pointers */ + dst += nbytes; + src += nbytes; + + /* + * nbits is the number of remaining bits. It should not exceed 8 as + * we've already copied as much bytes as possible. + */ + nbits %= 8; + + /* + * If there's no more bits to copy to the destination and src buffer + * was already byte aligned, then we're done. + */ + if (!nbits && !bits_in_src_buffer) + return; + + /* Copy the remaining bits to src_buffer */ + if (nbits) + src_buffer |= (*src & GENMASK(nbits - 1, 0)) << + bits_in_src_buffer; + bits_in_src_buffer += nbits; + + /* + * In case there were not enough bits to get a byte aligned dst buffer + * prepare the src_buffer variable to match the dst organization (shift + * src_buffer by dst_bit_off and retrieve the least significant bits + * from dst). + */ + if (dst_bit_off) + src_buffer = (src_buffer << dst_bit_off) | + (*dst & GENMASK(dst_bit_off - 1, 0)); + bits_in_src_buffer += dst_bit_off; + + /* + * Keep most significant bits from dst if we end up with an unaligned + * number of bits. + */ + nbytes = bits_in_src_buffer / 8; + if (bits_in_src_buffer % 8) { + src_buffer |= (dst[nbytes] & + GENMASK(7, bits_in_src_buffer % 8)) << + (nbytes * 8); + nbytes++; + } + + /* Copy the remaining bytes to dst */ + for (i = 0; i < nbytes; i++) { + dst[i] = src_buffer; + src_buffer >>= 8; + } +} diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 959cb9b70310..4f3851a24bb2 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -791,6 +791,7 @@ static void gpmi_free_dma_buffer(struct gpmi_nand_data *this) this->page_buffer_phys); kfree(this->cmd_buffer); kfree(this->data_buffer_dma); + kfree(this->raw_buffer); this->cmd_buffer = NULL; this->data_buffer_dma = NULL; @@ -837,6 +838,9 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this) if (!this->page_buffer_virt) goto error_alloc; + this->raw_buffer = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL); + if (!this->raw_buffer) + goto error_alloc; /* Slice up the page buffer. */ this->payload_virt = this->page_buffer_virt; @@ -1347,6 +1351,199 @@ gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) return status & NAND_STATUS_FAIL ? -EIO : 0; } +/* + * This function reads a NAND page without involving the ECC engine (no HW + * ECC correction). + * The tricky part in the GPMI/BCH controller is that it stores ECC bits + * inline (interleaved with payload DATA), and do not align data chunk on + * byte boundaries. + * We thus need to take care moving the payload data and ECC bits stored in the + * page into the provided buffers, which is why we're using gpmi_copy_bits. + * + * See set_geometry_by_ecc_info inline comments to have a full description + * of the layout used by the GPMI controller. + */ +static int gpmi_ecc_read_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, + int oob_required, int page) +{ + struct gpmi_nand_data *this = chip->priv; + struct bch_geometry *nfc_geo = &this->bch_geometry; + int eccsize = nfc_geo->ecc_chunk_size; + int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len; + u8 *tmp_buf = this->raw_buffer; + size_t src_bit_off; + size_t oob_bit_off; + size_t oob_byte_off; + uint8_t *oob = chip->oob_poi; + int step; + + chip->read_buf(mtd, tmp_buf, + mtd->writesize + mtd->oobsize); + + /* + * If required, swap the bad block marker and the data stored in the + * metadata section, so that we don't wrongly consider a block as bad. + * + * See the layout description for a detailed explanation on why this + * is needed. + */ + if (this->swap_block_mark) { + u8 swap = tmp_buf[0]; + + tmp_buf[0] = tmp_buf[mtd->writesize]; + tmp_buf[mtd->writesize] = swap; + } + + /* + * Copy the metadata section into the oob buffer (this section is + * guaranteed to be aligned on a byte boundary). + */ + if (oob_required) + memcpy(oob, tmp_buf, nfc_geo->metadata_size); + + oob_bit_off = nfc_geo->metadata_size * 8; + src_bit_off = oob_bit_off; + + /* Extract interleaved payload data and ECC bits */ + for (step = 0; step < nfc_geo->ecc_chunk_count; step++) { + if (buf) + gpmi_copy_bits(buf, step * eccsize * 8, + tmp_buf, src_bit_off, + eccsize * 8); + src_bit_off += eccsize * 8; + + /* Align last ECC block to align a byte boundary */ + if (step == nfc_geo->ecc_chunk_count - 1 && + (oob_bit_off + eccbits) % 8) + eccbits += 8 - ((oob_bit_off + eccbits) % 8); + + if (oob_required) + gpmi_copy_bits(oob, oob_bit_off, + tmp_buf, src_bit_off, + eccbits); + + src_bit_off += eccbits; + oob_bit_off += eccbits; + } + + if (oob_required) { + oob_byte_off = oob_bit_off / 8; + + if (oob_byte_off < mtd->oobsize) + memcpy(oob + oob_byte_off, + tmp_buf + mtd->writesize + oob_byte_off, + mtd->oobsize - oob_byte_off); + } + + return 0; +} + +/* + * This function writes a NAND page without involving the ECC engine (no HW + * ECC generation). + * The tricky part in the GPMI/BCH controller is that it stores ECC bits + * inline (interleaved with payload DATA), and do not align data chunk on + * byte boundaries. + * We thus need to take care moving the OOB area at the right place in the + * final page, which is why we're using gpmi_copy_bits. + * + * See set_geometry_by_ecc_info inline comments to have a full description + * of the layout used by the GPMI controller. + */ +static int gpmi_ecc_write_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, + int oob_required) +{ + struct gpmi_nand_data *this = chip->priv; + struct bch_geometry *nfc_geo = &this->bch_geometry; + int eccsize = nfc_geo->ecc_chunk_size; + int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len; + u8 *tmp_buf = this->raw_buffer; + uint8_t *oob = chip->oob_poi; + size_t dst_bit_off; + size_t oob_bit_off; + size_t oob_byte_off; + int step; + + /* + * Initialize all bits to 1 in case we don't have a buffer for the + * payload or oob data in order to leave unspecified bits of data + * to their initial state. + */ + if (!buf || !oob_required) + memset(tmp_buf, 0xff, mtd->writesize + mtd->oobsize); + + /* + * First copy the metadata section (stored in oob buffer) at the + * beginning of the page, as imposed by the GPMI layout. + */ + memcpy(tmp_buf, oob, nfc_geo->metadata_size); + oob_bit_off = nfc_geo->metadata_size * 8; + dst_bit_off = oob_bit_off; + + /* Interleave payload data and ECC bits */ + for (step = 0; step < nfc_geo->ecc_chunk_count; step++) { + if (buf) + gpmi_copy_bits(tmp_buf, dst_bit_off, + buf, step * eccsize * 8, eccsize * 8); + dst_bit_off += eccsize * 8; + + /* Align last ECC block to align a byte boundary */ + if (step == nfc_geo->ecc_chunk_count - 1 && + (oob_bit_off + eccbits) % 8) + eccbits += 8 - ((oob_bit_off + eccbits) % 8); + + if (oob_required) + gpmi_copy_bits(tmp_buf, dst_bit_off, + oob, oob_bit_off, eccbits); + + dst_bit_off += eccbits; + oob_bit_off += eccbits; + } + + oob_byte_off = oob_bit_off / 8; + + if (oob_required && oob_byte_off < mtd->oobsize) + memcpy(tmp_buf + mtd->writesize + oob_byte_off, + oob + oob_byte_off, mtd->oobsize - oob_byte_off); + + /* + * If required, swap the bad block marker and the first byte of the + * metadata section, so that we don't modify the bad block marker. + * + * See the layout description for a detailed explanation on why this + * is needed. + */ + if (this->swap_block_mark) { + u8 swap = tmp_buf[0]; + + tmp_buf[0] = tmp_buf[mtd->writesize]; + tmp_buf[mtd->writesize] = swap; + } + + chip->write_buf(mtd, tmp_buf, mtd->writesize + mtd->oobsize); + + return 0; +} + +static int gpmi_ecc_read_oob_raw(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + return gpmi_ecc_read_page_raw(mtd, chip, NULL, 1, page); +} + +static int gpmi_ecc_write_oob_raw(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0, page); + + return gpmi_ecc_write_page_raw(mtd, chip, NULL, 1); +} + static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd->priv; @@ -1664,6 +1861,10 @@ static int gpmi_init_last(struct gpmi_nand_data *this) ecc->write_page = gpmi_ecc_write_page; ecc->read_oob = gpmi_ecc_read_oob; ecc->write_oob = gpmi_ecc_write_oob; + ecc->read_page_raw = gpmi_ecc_read_page_raw; + ecc->write_page_raw = gpmi_ecc_write_page_raw; + ecc->read_oob_raw = gpmi_ecc_read_oob_raw; + ecc->write_oob_raw = gpmi_ecc_write_oob_raw; ecc->mode = NAND_ECC_HW; ecc->size = bch_geo->ecc_chunk_size; ecc->strength = bch_geo->ecc_strength; diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index 32c6ba49f986..544062f65020 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -189,6 +189,8 @@ struct gpmi_nand_data { void *auxiliary_virt; dma_addr_t auxiliary_phys; + void *raw_buffer; + /* DMA channels */ #define DMA_CHANS 8 struct dma_chan *dma_chans[DMA_CHANS]; @@ -290,6 +292,10 @@ extern int gpmi_send_page(struct gpmi_nand_data *, extern int gpmi_read_page(struct gpmi_nand_data *, dma_addr_t payload, dma_addr_t auxiliary); +void gpmi_copy_bits(u8 *dst, size_t dst_bit_off, + const u8 *src, size_t src_bit_off, + size_t nbits); + /* BCH : Status Block Completion Codes */ #define STATUS_GOOD 0x00 #define STATUS_ERASED 0xff diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index e1d56beeca79..a8f550fec35e 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -280,14 +280,10 @@ static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size) *t++ = __raw_readl(s++); } -static void memcpy32_toio(void __iomem *trg, const void *src, int size) +static inline void memcpy32_toio(void __iomem *trg, const void *src, int size) { - int i; - u32 __iomem *t = trg; - const u32 *s = src; - - for (i = 0; i < (size >> 2); i++) - __raw_writel(*s++, t++); + /* __iowrite32_copy use 32bit size values so divide by 4 */ + __iowrite32_copy(trg, src, size / 4); } static int check_int_v3(struct mxc_nand_host *host) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 5b5c62712814..41585dfb206f 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -485,11 +485,11 @@ static int nand_check_wp(struct mtd_info *mtd) } /** - * nand_block_checkbad - [GENERIC] Check if a block is marked bad + * nand_block_isreserved - [GENERIC] Check if a block is marked reserved. * @mtd: MTD device structure * @ofs: offset from device start * - * Check if the block is mark as reserved. + * Check if the block is marked as reserved. */ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs) { @@ -720,7 +720,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, /* * Program and erase have their own busy handlers status, sequential - * in, and deplete1 need no delay. + * in and status need no delay. */ switch (command) { @@ -3765,9 +3765,9 @@ ident_done: pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, type->name); - pr_info("%dMiB, %s, page size: %d, OOB size: %d\n", + pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n", (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC", - mtd->writesize, mtd->oobsize); + mtd->erasesize >> 10, mtd->writesize, mtd->oobsize); return type; } @@ -4035,7 +4035,7 @@ int nand_scan_tail(struct mtd_info *mtd) */ if (!ecc->size && (mtd->oobsize >= 64)) { ecc->size = 512; - ecc->bytes = 7; + ecc->bytes = DIV_ROUND_UP(13 * ecc->strength, 8); } ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes, &ecc->layout); diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index fbde89105245..dd620c19c619 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -178,6 +178,7 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_EON, "Eon"}, {NAND_MFR_SANDISK, "SanDisk"}, {NAND_MFR_INTEL, "Intel"}, + {NAND_MFR_ATO, "ATO"}, {0x0, "Unknown"} }; diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 7dc1dd28d896..ab5bbf567439 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -87,10 +87,6 @@ #define CONFIG_NANDSIM_MAX_PARTS 32 #endif -static uint first_id_byte = CONFIG_NANDSIM_FIRST_ID_BYTE; -static uint second_id_byte = CONFIG_NANDSIM_SECOND_ID_BYTE; -static uint third_id_byte = CONFIG_NANDSIM_THIRD_ID_BYTE; -static uint fourth_id_byte = CONFIG_NANDSIM_FOURTH_ID_BYTE; static uint access_delay = CONFIG_NANDSIM_ACCESS_DELAY; static uint programm_delay = CONFIG_NANDSIM_PROGRAMM_DELAY; static uint erase_delay = CONFIG_NANDSIM_ERASE_DELAY; @@ -111,11 +107,19 @@ static unsigned int overridesize = 0; static char *cache_file = NULL; static unsigned int bbt; static unsigned int bch; +static u_char id_bytes[8] = { + [0] = CONFIG_NANDSIM_FIRST_ID_BYTE, + [1] = CONFIG_NANDSIM_SECOND_ID_BYTE, + [2] = CONFIG_NANDSIM_THIRD_ID_BYTE, + [3] = CONFIG_NANDSIM_FOURTH_ID_BYTE, + [4 ... 7] = 0xFF, +}; -module_param(first_id_byte, uint, 0400); -module_param(second_id_byte, uint, 0400); -module_param(third_id_byte, uint, 0400); -module_param(fourth_id_byte, uint, 0400); +module_param_array(id_bytes, byte, NULL, 0400); +module_param_named(first_id_byte, id_bytes[0], byte, 0400); +module_param_named(second_id_byte, id_bytes[1], byte, 0400); +module_param_named(third_id_byte, id_bytes[2], byte, 0400); +module_param_named(fourth_id_byte, id_bytes[3], byte, 0400); module_param(access_delay, uint, 0400); module_param(programm_delay, uint, 0400); module_param(erase_delay, uint, 0400); @@ -136,10 +140,11 @@ module_param(cache_file, charp, 0400); module_param(bbt, uint, 0400); module_param(bch, uint, 0400); -MODULE_PARM_DESC(first_id_byte, "The first byte returned by NAND Flash 'read ID' command (manufacturer ID)"); -MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)"); -MODULE_PARM_DESC(third_id_byte, "The third byte returned by NAND Flash 'read ID' command"); -MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command"); +MODULE_PARM_DESC(id_bytes, "The ID bytes returned by NAND Flash 'read ID' command"); +MODULE_PARM_DESC(first_id_byte, "The first byte returned by NAND Flash 'read ID' command (manufacturer ID) (obsolete)"); +MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID) (obsolete)"); +MODULE_PARM_DESC(third_id_byte, "The third byte returned by NAND Flash 'read ID' command (obsolete)"); +MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command (obsolete)"); MODULE_PARM_DESC(access_delay, "Initial page access delay (microseconds)"); MODULE_PARM_DESC(programm_delay, "Page programm delay (microseconds"); MODULE_PARM_DESC(erase_delay, "Sector erase delay (milliseconds)"); @@ -304,7 +309,7 @@ struct nandsim { unsigned int nbparts; uint busw; /* flash chip bus width (8 or 16) */ - u_char ids[4]; /* chip's ID bytes */ + u_char ids[8]; /* chip's ID bytes */ uint32_t options; /* chip's characteristic bits */ uint32_t state; /* current chip state */ uint32_t nxstate; /* next expected state */ @@ -2279,17 +2284,18 @@ static int __init ns_init_module(void) * Perform minimum nandsim structure initialization to handle * the initial ID read command correctly */ - if (third_id_byte != 0xFF || fourth_id_byte != 0xFF) + if (id_bytes[6] != 0xFF || id_bytes[7] != 0xFF) + nand->geom.idbytes = 8; + else if (id_bytes[4] != 0xFF || id_bytes[5] != 0xFF) + nand->geom.idbytes = 6; + else if (id_bytes[2] != 0xFF || id_bytes[3] != 0xFF) nand->geom.idbytes = 4; else nand->geom.idbytes = 2; nand->regs.status = NS_STATUS_OK(nand); nand->nxstate = STATE_UNKNOWN; nand->options |= OPT_PAGE512; /* temporary value */ - nand->ids[0] = first_id_byte; - nand->ids[1] = second_id_byte; - nand->ids[2] = third_id_byte; - nand->ids[3] = fourth_id_byte; + memcpy(nand->ids, id_bytes, sizeof(nand->ids)); if (bus_width == 16) { nand->busw = 16; chip->options |= NAND_BUSWIDTH_16; diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 6d74b56dd9f6..63f858e6bf39 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -144,11 +144,13 @@ static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc, 0xac, 0x6b, 0xff, 0x99, 0x7b}; static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10}; -/* oob info generated runtime depending on ecc algorithm and layout selected */ -static struct nand_ecclayout omap_oobinfo; +/* Shared among all NAND instances to synchronize access to the ECC Engine */ +static struct nand_hw_control omap_gpmc_controller = { + .lock = __SPIN_LOCK_UNLOCKED(omap_gpmc_controller.lock), + .wq = __WAIT_QUEUE_HEAD_INITIALIZER(omap_gpmc_controller.wq), +}; struct omap_nand_info { - struct nand_hw_control controller; struct omap_nand_platform_data *pdata; struct mtd_info mtd; struct nand_chip nand; @@ -168,6 +170,8 @@ struct omap_nand_info { u_char *buf; int buf_len; struct gpmc_nand_regs reg; + /* generated at runtime depending on ECC algorithm and layout selected */ + struct nand_ecclayout oobinfo; /* fields specific for BCHx_HW ECC scheme */ struct device *elm_dev; struct device_node *of_node; @@ -1686,9 +1690,6 @@ static int omap_nand_probe(struct platform_device *pdev) platform_set_drvdata(pdev, info); - spin_lock_init(&info->controller.lock); - init_waitqueue_head(&info->controller.wq); - info->pdev = pdev; info->gpmc_cs = pdata->cs; info->reg = pdata->reg; @@ -1708,7 +1709,7 @@ static int omap_nand_probe(struct platform_device *pdev) info->phys_base = res->start; - nand_chip->controller = &info->controller; + nand_chip->controller = &omap_gpmc_controller; nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R; nand_chip->cmd_ctrl = omap_hwcontrol; @@ -1741,13 +1742,6 @@ static int omap_nand_probe(struct platform_device *pdev) goto return_error; } - /* check for small page devices */ - if ((mtd->oobsize < 64) && (pdata->ecc_opt != OMAP_ECC_HAM1_CODE_HW)) { - dev_err(&info->pdev->dev, "small page devices are not supported\n"); - err = -EINVAL; - goto return_error; - } - /* re-populate low-level callbacks based on xfer modes */ switch (pdata->xfer_type) { case NAND_OMAP_PREFETCH_POLLED: @@ -1840,7 +1834,7 @@ static int omap_nand_probe(struct platform_device *pdev) } /* populate MTD interface based on ECC scheme */ - ecclayout = &omap_oobinfo; + ecclayout = &info->oobinfo; switch (info->ecc_opt) { case OMAP_ECC_HAM1_CODE_SW: nand_chip->ecc.mode = NAND_ECC_SOFT; diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index c53e36956bff..c3c6d305caa7 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -19,7 +19,7 @@ #include <linux/mtd/partitions.h> #include <linux/clk.h> #include <linux/err.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/sizes.h> #include <linux/platform_data/mtd-orion_nand.h> @@ -85,33 +85,24 @@ static int __init orion_nand_probe(struct platform_device *pdev) int ret = 0; u32 val = 0; - nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL); - if (!nc) { - ret = -ENOMEM; - goto no_res; - } + nc = devm_kzalloc(&pdev->dev, + sizeof(struct nand_chip) + sizeof(struct mtd_info), + GFP_KERNEL); + if (!nc) + return -ENOMEM; mtd = (struct mtd_info *)(nc + 1); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENODEV; - goto no_res; - } + io_base = devm_ioremap_resource(&pdev->dev, res); - io_base = ioremap(res->start, resource_size(res)); - if (!io_base) { - dev_err(&pdev->dev, "ioremap failed\n"); - ret = -EIO; - goto no_res; - } + if (IS_ERR(io_base)) + return PTR_ERR(io_base); if (pdev->dev.of_node) { board = devm_kzalloc(&pdev->dev, sizeof(struct orion_nand_data), GFP_KERNEL); - if (!board) { - ret = -ENOMEM; - goto no_res; - } + if (!board) + return -ENOMEM; if (!of_property_read_u32(pdev->dev.of_node, "cle", &val)) board->cle = (u8)val; else @@ -185,9 +176,6 @@ no_dev: clk_disable_unprepare(clk); clk_put(clk); } - iounmap(io_base); -no_res: - kfree(nc); return ret; } @@ -195,15 +183,10 @@ no_res: static int orion_nand_remove(struct platform_device *pdev) { struct mtd_info *mtd = platform_get_drvdata(pdev); - struct nand_chip *nc = mtd->priv; struct clk *clk; nand_release(mtd); - iounmap(nc->IO_ADDR_W); - - kfree(nc); - clk = clk_get(&pdev->dev, NULL); if (!IS_ERR(clk)) { clk_disable_unprepare(clk); diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c new file mode 100644 index 000000000000..ccaa8e283388 --- /dev/null +++ b/drivers/mtd/nand/sunxi_nand.c @@ -0,0 +1,1432 @@ +/* + * Copyright (C) 2013 Boris BREZILLON <b.brezillon.dev@gmail.com> + * + * Derived from: + * https://github.com/yuq/sunxi-nfc-mtd + * Copyright (C) 2013 Qiang Yu <yuq825@gmail.com> + * + * https://github.com/hno/Allwinner-Info + * Copyright (C) 2013 Henrik Nordström <Henrik Nordström> + * + * Copyright (C) 2013 Dmitriy B. <rzk333@gmail.com> + * Copyright (C) 2013 Sergey Lapin <slapin@ossfans.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/of_mtd.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#define NFC_REG_CTL 0x0000 +#define NFC_REG_ST 0x0004 +#define NFC_REG_INT 0x0008 +#define NFC_REG_TIMING_CTL 0x000C +#define NFC_REG_TIMING_CFG 0x0010 +#define NFC_REG_ADDR_LOW 0x0014 +#define NFC_REG_ADDR_HIGH 0x0018 +#define NFC_REG_SECTOR_NUM 0x001C +#define NFC_REG_CNT 0x0020 +#define NFC_REG_CMD 0x0024 +#define NFC_REG_RCMD_SET 0x0028 +#define NFC_REG_WCMD_SET 0x002C +#define NFC_REG_IO_DATA 0x0030 +#define NFC_REG_ECC_CTL 0x0034 +#define NFC_REG_ECC_ST 0x0038 +#define NFC_REG_DEBUG 0x003C +#define NFC_REG_ECC_CNT0 0x0040 +#define NFC_REG_ECC_CNT1 0x0044 +#define NFC_REG_ECC_CNT2 0x0048 +#define NFC_REG_ECC_CNT3 0x004c +#define NFC_REG_USER_DATA_BASE 0x0050 +#define NFC_REG_SPARE_AREA 0x00A0 +#define NFC_RAM0_BASE 0x0400 +#define NFC_RAM1_BASE 0x0800 + +/* define bit use in NFC_CTL */ +#define NFC_EN BIT(0) +#define NFC_RESET BIT(1) +#define NFC_BUS_WIDYH BIT(2) +#define NFC_RB_SEL BIT(3) +#define NFC_CE_SEL GENMASK(26, 24) +#define NFC_CE_CTL BIT(6) +#define NFC_CE_CTL1 BIT(7) +#define NFC_PAGE_SIZE GENMASK(11, 8) +#define NFC_SAM BIT(12) +#define NFC_RAM_METHOD BIT(14) +#define NFC_DEBUG_CTL BIT(31) + +/* define bit use in NFC_ST */ +#define NFC_RB_B2R BIT(0) +#define NFC_CMD_INT_FLAG BIT(1) +#define NFC_DMA_INT_FLAG BIT(2) +#define NFC_CMD_FIFO_STATUS BIT(3) +#define NFC_STA BIT(4) +#define NFC_NATCH_INT_FLAG BIT(5) +#define NFC_RB_STATE0 BIT(8) +#define NFC_RB_STATE1 BIT(9) +#define NFC_RB_STATE2 BIT(10) +#define NFC_RB_STATE3 BIT(11) + +/* define bit use in NFC_INT */ +#define NFC_B2R_INT_ENABLE BIT(0) +#define NFC_CMD_INT_ENABLE BIT(1) +#define NFC_DMA_INT_ENABLE BIT(2) +#define NFC_INT_MASK (NFC_B2R_INT_ENABLE | \ + NFC_CMD_INT_ENABLE | \ + NFC_DMA_INT_ENABLE) + +/* define bit use in NFC_CMD */ +#define NFC_CMD_LOW_BYTE GENMASK(7, 0) +#define NFC_CMD_HIGH_BYTE GENMASK(15, 8) +#define NFC_ADR_NUM GENMASK(18, 16) +#define NFC_SEND_ADR BIT(19) +#define NFC_ACCESS_DIR BIT(20) +#define NFC_DATA_TRANS BIT(21) +#define NFC_SEND_CMD1 BIT(22) +#define NFC_WAIT_FLAG BIT(23) +#define NFC_SEND_CMD2 BIT(24) +#define NFC_SEQ BIT(25) +#define NFC_DATA_SWAP_METHOD BIT(26) +#define NFC_ROW_AUTO_INC BIT(27) +#define NFC_SEND_CMD3 BIT(28) +#define NFC_SEND_CMD4 BIT(29) +#define NFC_CMD_TYPE GENMASK(31, 30) + +/* define bit use in NFC_RCMD_SET */ +#define NFC_READ_CMD GENMASK(7, 0) +#define NFC_RANDOM_READ_CMD0 GENMASK(15, 8) +#define NFC_RANDOM_READ_CMD1 GENMASK(23, 16) + +/* define bit use in NFC_WCMD_SET */ +#define NFC_PROGRAM_CMD GENMASK(7, 0) +#define NFC_RANDOM_WRITE_CMD GENMASK(15, 8) +#define NFC_READ_CMD0 GENMASK(23, 16) +#define NFC_READ_CMD1 GENMASK(31, 24) + +/* define bit use in NFC_ECC_CTL */ +#define NFC_ECC_EN BIT(0) +#define NFC_ECC_PIPELINE BIT(3) +#define NFC_ECC_EXCEPTION BIT(4) +#define NFC_ECC_BLOCK_SIZE BIT(5) +#define NFC_RANDOM_EN BIT(9) +#define NFC_RANDOM_DIRECTION BIT(10) +#define NFC_ECC_MODE_SHIFT 12 +#define NFC_ECC_MODE GENMASK(15, 12) +#define NFC_RANDOM_SEED GENMASK(30, 16) + +#define NFC_DEFAULT_TIMEOUT_MS 1000 + +#define NFC_SRAM_SIZE 1024 + +#define NFC_MAX_CS 7 + +/* + * Ready/Busy detection type: describes the Ready/Busy detection modes + * + * @RB_NONE: no external detection available, rely on STATUS command + * and software timeouts + * @RB_NATIVE: use sunxi NAND controller Ready/Busy support. The Ready/Busy + * pin of the NAND flash chip must be connected to one of the + * native NAND R/B pins (those which can be muxed to the NAND + * Controller) + * @RB_GPIO: use a simple GPIO to handle Ready/Busy status. The Ready/Busy + * pin of the NAND flash chip must be connected to a GPIO capable + * pin. + */ +enum sunxi_nand_rb_type { + RB_NONE, + RB_NATIVE, + RB_GPIO, +}; + +/* + * Ready/Busy structure: stores information related to Ready/Busy detection + * + * @type: the Ready/Busy detection mode + * @info: information related to the R/B detection mode. Either a gpio + * id or a native R/B id (those supported by the NAND controller). + */ +struct sunxi_nand_rb { + enum sunxi_nand_rb_type type; + union { + int gpio; + int nativeid; + } info; +}; + +/* + * Chip Select structure: stores information related to NAND Chip Select + * + * @cs: the NAND CS id used to communicate with a NAND Chip + * @rb: the Ready/Busy description + */ +struct sunxi_nand_chip_sel { + u8 cs; + struct sunxi_nand_rb rb; +}; + +/* + * sunxi HW ECC infos: stores information related to HW ECC support + * + * @mode: the sunxi ECC mode field deduced from ECC requirements + * @layout: the OOB layout depending on the ECC requirements and the + * selected ECC mode + */ +struct sunxi_nand_hw_ecc { + int mode; + struct nand_ecclayout layout; +}; + +/* + * NAND chip structure: stores NAND chip device related information + * + * @node: used to store NAND chips into a list + * @nand: base NAND chip structure + * @mtd: base MTD structure + * @clk_rate: clk_rate required for this NAND chip + * @selected: current active CS + * @nsels: number of CS lines required by the NAND chip + * @sels: array of CS lines descriptions + */ +struct sunxi_nand_chip { + struct list_head node; + struct nand_chip nand; + struct mtd_info mtd; + unsigned long clk_rate; + int selected; + int nsels; + struct sunxi_nand_chip_sel sels[0]; +}; + +static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand) +{ + return container_of(nand, struct sunxi_nand_chip, nand); +} + +/* + * NAND Controller structure: stores sunxi NAND controller information + * + * @controller: base controller structure + * @dev: parent device (used to print error messages) + * @regs: NAND controller registers + * @ahb_clk: NAND Controller AHB clock + * @mod_clk: NAND Controller mod clock + * @assigned_cs: bitmask describing already assigned CS lines + * @clk_rate: NAND controller current clock rate + * @chips: a list containing all the NAND chips attached to + * this NAND controller + * @complete: a completion object used to wait for NAND + * controller events + */ +struct sunxi_nfc { + struct nand_hw_control controller; + struct device *dev; + void __iomem *regs; + struct clk *ahb_clk; + struct clk *mod_clk; + unsigned long assigned_cs; + unsigned long clk_rate; + struct list_head chips; + struct completion complete; +}; + +static inline struct sunxi_nfc *to_sunxi_nfc(struct nand_hw_control *ctrl) +{ + return container_of(ctrl, struct sunxi_nfc, controller); +} + +static irqreturn_t sunxi_nfc_interrupt(int irq, void *dev_id) +{ + struct sunxi_nfc *nfc = dev_id; + u32 st = readl(nfc->regs + NFC_REG_ST); + u32 ien = readl(nfc->regs + NFC_REG_INT); + + if (!(ien & st)) + return IRQ_NONE; + + if ((ien & st) == ien) + complete(&nfc->complete); + + writel(st & NFC_INT_MASK, nfc->regs + NFC_REG_ST); + writel(~st & ien & NFC_INT_MASK, nfc->regs + NFC_REG_INT); + + return IRQ_HANDLED; +} + +static int sunxi_nfc_wait_int(struct sunxi_nfc *nfc, u32 flags, + unsigned int timeout_ms) +{ + init_completion(&nfc->complete); + + writel(flags, nfc->regs + NFC_REG_INT); + + if (!timeout_ms) + timeout_ms = NFC_DEFAULT_TIMEOUT_MS; + + if (!wait_for_completion_timeout(&nfc->complete, + msecs_to_jiffies(timeout_ms))) { + dev_err(nfc->dev, "wait interrupt timedout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int sunxi_nfc_wait_cmd_fifo_empty(struct sunxi_nfc *nfc) +{ + unsigned long timeout = jiffies + + msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS); + + do { + if (!(readl(nfc->regs + NFC_REG_ST) & NFC_CMD_FIFO_STATUS)) + return 0; + } while (time_before(jiffies, timeout)); + + dev_err(nfc->dev, "wait for empty cmd FIFO timedout\n"); + return -ETIMEDOUT; +} + +static int sunxi_nfc_rst(struct sunxi_nfc *nfc) +{ + unsigned long timeout = jiffies + + msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS); + + writel(0, nfc->regs + NFC_REG_ECC_CTL); + writel(NFC_RESET, nfc->regs + NFC_REG_CTL); + + do { + if (!(readl(nfc->regs + NFC_REG_CTL) & NFC_RESET)) + return 0; + } while (time_before(jiffies, timeout)); + + dev_err(nfc->dev, "wait for NAND controller reset timedout\n"); + return -ETIMEDOUT; +} + +static int sunxi_nfc_dev_ready(struct mtd_info *mtd) +{ + struct nand_chip *nand = mtd->priv; + struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); + struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); + struct sunxi_nand_rb *rb; + unsigned long timeo = (sunxi_nand->nand.state == FL_ERASING ? 400 : 20); + int ret; + + if (sunxi_nand->selected < 0) + return 0; + + rb = &sunxi_nand->sels[sunxi_nand->selected].rb; + + switch (rb->type) { + case RB_NATIVE: + ret = !!(readl(nfc->regs + NFC_REG_ST) & + (NFC_RB_STATE0 << rb->info.nativeid)); + if (ret) + break; + + sunxi_nfc_wait_int(nfc, NFC_RB_B2R, timeo); + ret = !!(readl(nfc->regs + NFC_REG_ST) & + (NFC_RB_STATE0 << rb->info.nativeid)); + break; + case RB_GPIO: + ret = gpio_get_value(rb->info.gpio); + break; + case RB_NONE: + default: + ret = 0; + dev_err(nfc->dev, "cannot check R/B NAND status!\n"); + break; + } + + return ret; +} + +static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip) +{ + struct nand_chip *nand = mtd->priv; + struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); + struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); + struct sunxi_nand_chip_sel *sel; + u32 ctl; + + if (chip > 0 && chip >= sunxi_nand->nsels) + return; + + if (chip == sunxi_nand->selected) + return; + + ctl = readl(nfc->regs + NFC_REG_CTL) & + ~(NFC_CE_SEL | NFC_RB_SEL | NFC_EN); + + if (chip >= 0) { + sel = &sunxi_nand->sels[chip]; + + ctl |= (sel->cs << 24) | NFC_EN | + (((nand->page_shift - 10) & 0xf) << 8); + if (sel->rb.type == RB_NONE) { + nand->dev_ready = NULL; + } else { + nand->dev_ready = sunxi_nfc_dev_ready; + if (sel->rb.type == RB_NATIVE) + ctl |= (sel->rb.info.nativeid << 3); + } + + writel(mtd->writesize, nfc->regs + NFC_REG_SPARE_AREA); + + if (nfc->clk_rate != sunxi_nand->clk_rate) { + clk_set_rate(nfc->mod_clk, sunxi_nand->clk_rate); + nfc->clk_rate = sunxi_nand->clk_rate; + } + } + + writel(ctl, nfc->regs + NFC_REG_CTL); + + sunxi_nand->selected = chip; +} + +static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct nand_chip *nand = mtd->priv; + struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); + struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); + int ret; + int cnt; + int offs = 0; + u32 tmp; + + while (len > offs) { + cnt = min(len - offs, NFC_SRAM_SIZE); + + ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); + if (ret) + break; + + writel(cnt, nfc->regs + NFC_REG_CNT); + tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD; + writel(tmp, nfc->regs + NFC_REG_CMD); + + ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + if (ret) + break; + + if (buf) + memcpy_fromio(buf + offs, nfc->regs + NFC_RAM0_BASE, + cnt); + offs += cnt; + } +} + +static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, + int len) +{ + struct nand_chip *nand = mtd->priv; + struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); + struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); + int ret; + int cnt; + int offs = 0; + u32 tmp; + + while (len > offs) { + cnt = min(len - offs, NFC_SRAM_SIZE); + + ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); + if (ret) + break; + + writel(cnt, nfc->regs + NFC_REG_CNT); + memcpy_toio(nfc->regs + NFC_RAM0_BASE, buf + offs, cnt); + tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | + NFC_ACCESS_DIR; + writel(tmp, nfc->regs + NFC_REG_CMD); + + ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + if (ret) + break; + + offs += cnt; + } +} + +static uint8_t sunxi_nfc_read_byte(struct mtd_info *mtd) +{ + uint8_t ret; + + sunxi_nfc_read_buf(mtd, &ret, 1); + + return ret; +} + +static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat, + unsigned int ctrl) +{ + struct nand_chip *nand = mtd->priv; + struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); + struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); + int ret; + u32 tmp; + + ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); + if (ret) + return; + + if (ctrl & NAND_CTRL_CHANGE) { + tmp = readl(nfc->regs + NFC_REG_CTL); + if (ctrl & NAND_NCE) + tmp |= NFC_CE_CTL; + else + tmp &= ~NFC_CE_CTL; + writel(tmp, nfc->regs + NFC_REG_CTL); + } + + if (dat == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) { + writel(NFC_SEND_CMD1 | dat, nfc->regs + NFC_REG_CMD); + } else { + writel(dat, nfc->regs + NFC_REG_ADDR_LOW); + writel(NFC_SEND_ADR, nfc->regs + NFC_REG_CMD); + } + + sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); +} + +static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, + int oob_required, int page) +{ + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); + struct nand_ecc_ctrl *ecc = &chip->ecc; + struct nand_ecclayout *layout = ecc->layout; + struct sunxi_nand_hw_ecc *data = ecc->priv; + unsigned int max_bitflips = 0; + int offset; + int ret; + u32 tmp; + int i; + int cnt; + + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE); + tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) | + NFC_ECC_EXCEPTION; + + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + for (i = 0; i < ecc->steps; i++) { + if (i) + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, i * ecc->size, -1); + + offset = mtd->writesize + layout->eccpos[i * ecc->bytes] - 4; + + chip->read_buf(mtd, NULL, ecc->size); + + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); + + ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); + if (ret) + return ret; + + tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30); + writel(tmp, nfc->regs + NFC_REG_CMD); + + ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + if (ret) + return ret; + + memcpy_fromio(buf + (i * ecc->size), + nfc->regs + NFC_RAM0_BASE, ecc->size); + + if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) { + mtd->ecc_stats.failed++; + } else { + tmp = readl(nfc->regs + NFC_REG_ECC_CNT0) & 0xff; + mtd->ecc_stats.corrected += tmp; + max_bitflips = max_t(unsigned int, max_bitflips, tmp); + } + + if (oob_required) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); + + ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); + if (ret) + return ret; + + offset -= mtd->writesize; + chip->read_buf(mtd, chip->oob_poi + offset, + ecc->bytes + 4); + } + } + + if (oob_required) { + cnt = ecc->layout->oobfree[ecc->steps].length; + if (cnt > 0) { + offset = mtd->writesize + + ecc->layout->oobfree[ecc->steps].offset; + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); + offset -= mtd->writesize; + chip->read_buf(mtd, chip->oob_poi + offset, cnt); + } + } + + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~NFC_ECC_EN; + + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + return max_bitflips; +} + +static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); + struct nand_ecc_ctrl *ecc = &chip->ecc; + struct nand_ecclayout *layout = ecc->layout; + struct sunxi_nand_hw_ecc *data = ecc->priv; + int offset; + int ret; + u32 tmp; + int i; + int cnt; + + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE); + tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) | + NFC_ECC_EXCEPTION; + + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + for (i = 0; i < ecc->steps; i++) { + if (i) + chip->cmdfunc(mtd, NAND_CMD_RNDIN, i * ecc->size, -1); + + chip->write_buf(mtd, buf + (i * ecc->size), ecc->size); + + offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize; + + /* Fill OOB data in */ + if (oob_required) { + tmp = 0xffffffff; + memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp, + 4); + } else { + memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, + chip->oob_poi + offset - mtd->writesize, + 4); + } + + chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); + + ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); + if (ret) + return ret; + + tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR | + (1 << 30); + writel(tmp, nfc->regs + NFC_REG_CMD); + ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + if (ret) + return ret; + } + + if (oob_required) { + cnt = ecc->layout->oobfree[i].length; + if (cnt > 0) { + offset = mtd->writesize + + ecc->layout->oobfree[i].offset; + chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); + offset -= mtd->writesize; + chip->write_buf(mtd, chip->oob_poi + offset, cnt); + } + } + + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~NFC_ECC_EN; + + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + return 0; +} + +static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd, + struct nand_chip *chip, + uint8_t *buf, int oob_required, + int page) +{ + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); + struct nand_ecc_ctrl *ecc = &chip->ecc; + struct sunxi_nand_hw_ecc *data = ecc->priv; + unsigned int max_bitflips = 0; + uint8_t *oob = chip->oob_poi; + int offset = 0; + int ret; + int cnt; + u32 tmp; + int i; + + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE); + tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) | + NFC_ECC_EXCEPTION; + + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + for (i = 0; i < ecc->steps; i++) { + chip->read_buf(mtd, NULL, ecc->size); + + tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30); + writel(tmp, nfc->regs + NFC_REG_CMD); + + ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + if (ret) + return ret; + + memcpy_fromio(buf, nfc->regs + NFC_RAM0_BASE, ecc->size); + buf += ecc->size; + offset += ecc->size; + + if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) { + mtd->ecc_stats.failed++; + } else { + tmp = readl(nfc->regs + NFC_REG_ECC_CNT0) & 0xff; + mtd->ecc_stats.corrected += tmp; + max_bitflips = max_t(unsigned int, max_bitflips, tmp); + } + + if (oob_required) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); + chip->read_buf(mtd, oob, ecc->bytes + ecc->prepad); + oob += ecc->bytes + ecc->prepad; + } + + offset += ecc->bytes + ecc->prepad; + } + + if (oob_required) { + cnt = mtd->oobsize - (oob - chip->oob_poi); + if (cnt > 0) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); + chip->read_buf(mtd, oob, cnt); + } + } + + writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_ECC_EN, + nfc->regs + NFC_REG_ECC_CTL); + + return max_bitflips; +} + +static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, + int oob_required) +{ + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller); + struct nand_ecc_ctrl *ecc = &chip->ecc; + struct sunxi_nand_hw_ecc *data = ecc->priv; + uint8_t *oob = chip->oob_poi; + int offset = 0; + int ret; + int cnt; + u32 tmp; + int i; + + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE); + tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) | + NFC_ECC_EXCEPTION; + + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + for (i = 0; i < ecc->steps; i++) { + chip->write_buf(mtd, buf + (i * ecc->size), ecc->size); + offset += ecc->size; + + /* Fill OOB data in */ + if (oob_required) { + tmp = 0xffffffff; + memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp, + 4); + } else { + memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob, + 4); + } + + tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR | + (1 << 30); + writel(tmp, nfc->regs + NFC_REG_CMD); + + ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0); + if (ret) + return ret; + + offset += ecc->bytes + ecc->prepad; + oob += ecc->bytes + ecc->prepad; + } + + if (oob_required) { + cnt = mtd->oobsize - (oob - chip->oob_poi); + if (cnt > 0) { + chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1); + chip->write_buf(mtd, oob, cnt); + } + } + + tmp = readl(nfc->regs + NFC_REG_ECC_CTL); + tmp &= ~NFC_ECC_EN; + + writel(tmp, nfc->regs + NFC_REG_ECC_CTL); + + return 0; +} + +static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, + const struct nand_sdr_timings *timings) +{ + u32 min_clk_period = 0; + + /* T1 <=> tCLS */ + if (timings->tCLS_min > min_clk_period) + min_clk_period = timings->tCLS_min; + + /* T2 <=> tCLH */ + if (timings->tCLH_min > min_clk_period) + min_clk_period = timings->tCLH_min; + + /* T3 <=> tCS */ + if (timings->tCS_min > min_clk_period) + min_clk_period = timings->tCS_min; + + /* T4 <=> tCH */ + if (timings->tCH_min > min_clk_period) + min_clk_period = timings->tCH_min; + + /* T5 <=> tWP */ + if (timings->tWP_min > min_clk_period) + min_clk_period = timings->tWP_min; + + /* T6 <=> tWH */ + if (timings->tWH_min > min_clk_period) + min_clk_period = timings->tWH_min; + + /* T7 <=> tALS */ + if (timings->tALS_min > min_clk_period) + min_clk_period = timings->tALS_min; + + /* T8 <=> tDS */ + if (timings->tDS_min > min_clk_period) + min_clk_period = timings->tDS_min; + + /* T9 <=> tDH */ + if (timings->tDH_min > min_clk_period) + min_clk_period = timings->tDH_min; + + /* T10 <=> tRR */ + if (timings->tRR_min > (min_clk_period * 3)) + min_clk_period = DIV_ROUND_UP(timings->tRR_min, 3); + + /* T11 <=> tALH */ + if (timings->tALH_min > min_clk_period) + min_clk_period = timings->tALH_min; + + /* T12 <=> tRP */ + if (timings->tRP_min > min_clk_period) + min_clk_period = timings->tRP_min; + + /* T13 <=> tREH */ + if (timings->tREH_min > min_clk_period) + min_clk_period = timings->tREH_min; + + /* T14 <=> tRC */ + if (timings->tRC_min > (min_clk_period * 2)) + min_clk_period = DIV_ROUND_UP(timings->tRC_min, 2); + + /* T15 <=> tWC */ + if (timings->tWC_min > (min_clk_period * 2)) + min_clk_period = DIV_ROUND_UP(timings->tWC_min, 2); + + + /* Convert min_clk_period from picoseconds to nanoseconds */ + min_clk_period = DIV_ROUND_UP(min_clk_period, 1000); + + /* + * Convert min_clk_period into a clk frequency, then get the + * appropriate rate for the NAND controller IP given this formula + * (specified in the datasheet): + * nand clk_rate = 2 * min_clk_rate + */ + chip->clk_rate = (2 * NSEC_PER_SEC) / min_clk_period; + + /* TODO: configure T16-T19 */ + + return 0; +} + +static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip, + struct device_node *np) +{ + const struct nand_sdr_timings *timings; + int ret; + int mode; + + mode = onfi_get_async_timing_mode(&chip->nand); + if (mode == ONFI_TIMING_MODE_UNKNOWN) { + mode = chip->nand.onfi_timing_mode_default; + } else { + uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {}; + + mode = fls(mode) - 1; + if (mode < 0) + mode = 0; + + feature[0] = mode; + ret = chip->nand.onfi_set_features(&chip->mtd, &chip->nand, + ONFI_FEATURE_ADDR_TIMING_MODE, + feature); + if (ret) + return ret; + } + + timings = onfi_async_timing_mode_to_sdr_timings(mode); + if (IS_ERR(timings)) + return PTR_ERR(timings); + + return sunxi_nand_chip_set_timings(chip, timings); +} + +static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd, + struct nand_ecc_ctrl *ecc, + struct device_node *np) +{ + static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 }; + struct nand_chip *nand = mtd->priv; + struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); + struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); + struct sunxi_nand_hw_ecc *data; + struct nand_ecclayout *layout; + int nsectors; + int ret; + int i; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* Add ECC info retrieval from DT */ + for (i = 0; i < ARRAY_SIZE(strengths); i++) { + if (ecc->strength <= strengths[i]) + break; + } + + if (i >= ARRAY_SIZE(strengths)) { + dev_err(nfc->dev, "unsupported strength\n"); + ret = -ENOTSUPP; + goto err; + } + + data->mode = i; + + /* HW ECC always request ECC bytes for 1024 bytes blocks */ + ecc->bytes = DIV_ROUND_UP(ecc->strength * fls(8 * 1024), 8); + + /* HW ECC always work with even numbers of ECC bytes */ + ecc->bytes = ALIGN(ecc->bytes, 2); + + layout = &data->layout; + nsectors = mtd->writesize / ecc->size; + + if (mtd->oobsize < ((ecc->bytes + 4) * nsectors)) { + ret = -EINVAL; + goto err; + } + + layout->eccbytes = (ecc->bytes * nsectors); + + ecc->layout = layout; + ecc->priv = data; + + return 0; + +err: + kfree(data); + + return ret; +} + +static void sunxi_nand_hw_common_ecc_ctrl_cleanup(struct nand_ecc_ctrl *ecc) +{ + kfree(ecc->priv); +} + +static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd, + struct nand_ecc_ctrl *ecc, + struct device_node *np) +{ + struct nand_ecclayout *layout; + int nsectors; + int i, j; + int ret; + + ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np); + if (ret) + return ret; + + ecc->read_page = sunxi_nfc_hw_ecc_read_page; + ecc->write_page = sunxi_nfc_hw_ecc_write_page; + layout = ecc->layout; + nsectors = mtd->writesize / ecc->size; + + for (i = 0; i < nsectors; i++) { + if (i) { + layout->oobfree[i].offset = + layout->oobfree[i - 1].offset + + layout->oobfree[i - 1].length + + ecc->bytes; + layout->oobfree[i].length = 4; + } else { + /* + * The first 2 bytes are used for BB markers, hence we + * only have 2 bytes available in the first user data + * section. + */ + layout->oobfree[i].length = 2; + layout->oobfree[i].offset = 2; + } + + for (j = 0; j < ecc->bytes; j++) + layout->eccpos[(ecc->bytes * i) + j] = + layout->oobfree[i].offset + + layout->oobfree[i].length + j; + } + + if (mtd->oobsize > (ecc->bytes + 4) * nsectors) { + layout->oobfree[nsectors].offset = + layout->oobfree[nsectors - 1].offset + + layout->oobfree[nsectors - 1].length + + ecc->bytes; + layout->oobfree[nsectors].length = mtd->oobsize - + ((ecc->bytes + 4) * nsectors); + } + + return 0; +} + +static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd, + struct nand_ecc_ctrl *ecc, + struct device_node *np) +{ + struct nand_ecclayout *layout; + int nsectors; + int i; + int ret; + + ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np); + if (ret) + return ret; + + ecc->prepad = 4; + ecc->read_page = sunxi_nfc_hw_syndrome_ecc_read_page; + ecc->write_page = sunxi_nfc_hw_syndrome_ecc_write_page; + + layout = ecc->layout; + nsectors = mtd->writesize / ecc->size; + + for (i = 0; i < (ecc->bytes * nsectors); i++) + layout->eccpos[i] = i; + + layout->oobfree[0].length = mtd->oobsize - i; + layout->oobfree[0].offset = i; + + return 0; +} + +static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc) +{ + switch (ecc->mode) { + case NAND_ECC_HW: + case NAND_ECC_HW_SYNDROME: + sunxi_nand_hw_common_ecc_ctrl_cleanup(ecc); + break; + case NAND_ECC_NONE: + kfree(ecc->layout); + default: + break; + } +} + +static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc, + struct device_node *np) +{ + struct nand_chip *nand = mtd->priv; + int strength; + int blk_size; + int ret; + + blk_size = of_get_nand_ecc_step_size(np); + strength = of_get_nand_ecc_strength(np); + if (blk_size > 0 && strength > 0) { + ecc->size = blk_size; + ecc->strength = strength; + } else { + ecc->size = nand->ecc_step_ds; + ecc->strength = nand->ecc_strength_ds; + } + + if (!ecc->size || !ecc->strength) + return -EINVAL; + + ecc->mode = NAND_ECC_HW; + + ret = of_get_nand_ecc_mode(np); + if (ret >= 0) + ecc->mode = ret; + + switch (ecc->mode) { + case NAND_ECC_SOFT_BCH: + ecc->bytes = DIV_ROUND_UP(ecc->strength * fls(8 * ecc->size), + 8); + break; + case NAND_ECC_HW: + ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np); + if (ret) + return ret; + break; + case NAND_ECC_HW_SYNDROME: + ret = sunxi_nand_hw_syndrome_ecc_ctrl_init(mtd, ecc, np); + if (ret) + return ret; + break; + case NAND_ECC_NONE: + ecc->layout = kzalloc(sizeof(*ecc->layout), GFP_KERNEL); + if (!ecc->layout) + return -ENOMEM; + ecc->layout->oobfree[0].length = mtd->oobsize; + case NAND_ECC_SOFT: + break; + default: + return -EINVAL; + } + + return 0; +} + +static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, + struct device_node *np) +{ + const struct nand_sdr_timings *timings; + struct sunxi_nand_chip *chip; + struct mtd_part_parser_data ppdata; + struct mtd_info *mtd; + struct nand_chip *nand; + int nsels; + int ret; + int i; + u32 tmp; + + if (!of_get_property(np, "reg", &nsels)) + return -EINVAL; + + nsels /= sizeof(u32); + if (!nsels) { + dev_err(dev, "invalid reg property size\n"); + return -EINVAL; + } + + chip = devm_kzalloc(dev, + sizeof(*chip) + + (nsels * sizeof(struct sunxi_nand_chip_sel)), + GFP_KERNEL); + if (!chip) { + dev_err(dev, "could not allocate chip\n"); + return -ENOMEM; + } + + chip->nsels = nsels; + chip->selected = -1; + + for (i = 0; i < nsels; i++) { + ret = of_property_read_u32_index(np, "reg", i, &tmp); + if (ret) { + dev_err(dev, "could not retrieve reg property: %d\n", + ret); + return ret; + } + + if (tmp > NFC_MAX_CS) { + dev_err(dev, + "invalid reg value: %u (max CS = 7)\n", + tmp); + return -EINVAL; + } + + if (test_and_set_bit(tmp, &nfc->assigned_cs)) { + dev_err(dev, "CS %d already assigned\n", tmp); + return -EINVAL; + } + + chip->sels[i].cs = tmp; + + if (!of_property_read_u32_index(np, "allwinner,rb", i, &tmp) && + tmp < 2) { + chip->sels[i].rb.type = RB_NATIVE; + chip->sels[i].rb.info.nativeid = tmp; + } else { + ret = of_get_named_gpio(np, "rb-gpios", i); + if (ret >= 0) { + tmp = ret; + chip->sels[i].rb.type = RB_GPIO; + chip->sels[i].rb.info.gpio = tmp; + ret = devm_gpio_request(dev, tmp, "nand-rb"); + if (ret) + return ret; + + ret = gpio_direction_input(tmp); + if (ret) + return ret; + } else { + chip->sels[i].rb.type = RB_NONE; + } + } + } + + timings = onfi_async_timing_mode_to_sdr_timings(0); + if (IS_ERR(timings)) { + ret = PTR_ERR(timings); + dev_err(dev, + "could not retrieve timings for ONFI mode 0: %d\n", + ret); + return ret; + } + + ret = sunxi_nand_chip_set_timings(chip, timings); + if (ret) { + dev_err(dev, "could not configure chip timings: %d\n", ret); + return ret; + } + + nand = &chip->nand; + /* Default tR value specified in the ONFI spec (chapter 4.15.1) */ + nand->chip_delay = 200; + nand->controller = &nfc->controller; + nand->select_chip = sunxi_nfc_select_chip; + nand->cmd_ctrl = sunxi_nfc_cmd_ctrl; + nand->read_buf = sunxi_nfc_read_buf; + nand->write_buf = sunxi_nfc_write_buf; + nand->read_byte = sunxi_nfc_read_byte; + + if (of_get_nand_on_flash_bbt(np)) + nand->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; + + mtd = &chip->mtd; + mtd->dev.parent = dev; + mtd->priv = nand; + mtd->owner = THIS_MODULE; + + ret = nand_scan_ident(mtd, nsels, NULL); + if (ret) + return ret; + + ret = sunxi_nand_chip_init_timings(chip, np); + if (ret) { + dev_err(dev, "could not configure chip timings: %d\n", ret); + return ret; + } + + ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np); + if (ret) { + dev_err(dev, "ECC init failed: %d\n", ret); + return ret; + } + + ret = nand_scan_tail(mtd); + if (ret) { + dev_err(dev, "nand_scan_tail failed: %d\n", ret); + return ret; + } + + ppdata.of_node = np; + ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); + if (ret) { + dev_err(dev, "failed to register mtd device: %d\n", ret); + nand_release(mtd); + return ret; + } + + list_add_tail(&chip->node, &nfc->chips); + + return 0; +} + +static int sunxi_nand_chips_init(struct device *dev, struct sunxi_nfc *nfc) +{ + struct device_node *np = dev->of_node; + struct device_node *nand_np; + int nchips = of_get_child_count(np); + int ret; + + if (nchips > 8) { + dev_err(dev, "too many NAND chips: %d (max = 8)\n", nchips); + return -EINVAL; + } + + for_each_child_of_node(np, nand_np) { + ret = sunxi_nand_chip_init(dev, nfc, nand_np); + if (ret) + return ret; + } + + return 0; +} + +static void sunxi_nand_chips_cleanup(struct sunxi_nfc *nfc) +{ + struct sunxi_nand_chip *chip; + + while (!list_empty(&nfc->chips)) { + chip = list_first_entry(&nfc->chips, struct sunxi_nand_chip, + node); + nand_release(&chip->mtd); + sunxi_nand_ecc_cleanup(&chip->nand.ecc); + } +} + +static int sunxi_nfc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *r; + struct sunxi_nfc *nfc; + int irq; + int ret; + + nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL); + if (!nfc) + return -ENOMEM; + + nfc->dev = dev; + spin_lock_init(&nfc->controller.lock); + init_waitqueue_head(&nfc->controller.wq); + INIT_LIST_HEAD(&nfc->chips); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + nfc->regs = devm_ioremap_resource(dev, r); + if (IS_ERR(nfc->regs)) + return PTR_ERR(nfc->regs); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "failed to retrieve irq\n"); + return irq; + } + + nfc->ahb_clk = devm_clk_get(dev, "ahb"); + if (IS_ERR(nfc->ahb_clk)) { + dev_err(dev, "failed to retrieve ahb clk\n"); + return PTR_ERR(nfc->ahb_clk); + } + + ret = clk_prepare_enable(nfc->ahb_clk); + if (ret) + return ret; + + nfc->mod_clk = devm_clk_get(dev, "mod"); + if (IS_ERR(nfc->mod_clk)) { + dev_err(dev, "failed to retrieve mod clk\n"); + ret = PTR_ERR(nfc->mod_clk); + goto out_ahb_clk_unprepare; + } + + ret = clk_prepare_enable(nfc->mod_clk); + if (ret) + goto out_ahb_clk_unprepare; + + ret = sunxi_nfc_rst(nfc); + if (ret) + goto out_mod_clk_unprepare; + + writel(0, nfc->regs + NFC_REG_INT); + ret = devm_request_irq(dev, irq, sunxi_nfc_interrupt, + 0, "sunxi-nand", nfc); + if (ret) + goto out_mod_clk_unprepare; + + platform_set_drvdata(pdev, nfc); + + /* + * TODO: replace these magic values with proper flags as soon as we + * know what they are encoding. + */ + writel(0x100, nfc->regs + NFC_REG_TIMING_CTL); + writel(0x7ff, nfc->regs + NFC_REG_TIMING_CFG); + + ret = sunxi_nand_chips_init(dev, nfc); + if (ret) { + dev_err(dev, "failed to init nand chips\n"); + goto out_mod_clk_unprepare; + } + + return 0; + +out_mod_clk_unprepare: + clk_disable_unprepare(nfc->mod_clk); +out_ahb_clk_unprepare: + clk_disable_unprepare(nfc->ahb_clk); + + return ret; +} + +static int sunxi_nfc_remove(struct platform_device *pdev) +{ + struct sunxi_nfc *nfc = platform_get_drvdata(pdev); + + sunxi_nand_chips_cleanup(nfc); + + return 0; +} + +static const struct of_device_id sunxi_nfc_ids[] = { + { .compatible = "allwinner,sun4i-a10-nand" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sunxi_nfc_ids); + +static struct platform_driver sunxi_nfc_driver = { + .driver = { + .name = "sunxi_nand", + .of_match_table = sunxi_nfc_ids, + }, + .probe = sunxi_nfc_probe, + .remove = sunxi_nfc_remove, +}; +module_platform_driver(sunxi_nfc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Boris BREZILLON"); +MODULE_DESCRIPTION("Allwinner NAND Flash Controller driver"); +MODULE_ALIAS("platform:sunxi_nand"); diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index 2fb07eced2ba..39763b94f67d 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -719,16 +719,10 @@ static int fsl_qspi_read(struct spi_nor *nor, loff_t from, { struct fsl_qspi *q = nor->priv; u8 cmd = nor->read_opcode; - int ret; dev_dbg(q->dev, "cmd [%x],read from (0x%p, 0x%.8x, 0x%.8x),len:%d\n", cmd, q->ahb_base, q->chip_base_addr, (unsigned int)from, len); - /* Wait until the previous command is finished. */ - ret = nor->wait_till_ready(nor); - if (ret) - return ret; - /* Read out the data directly from the AHB buffer.*/ memcpy(buf, q->ahb_base + q->chip_base_addr + from, len); @@ -744,16 +738,6 @@ static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs) dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n", nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs); - /* Wait until finished previous write command. */ - ret = nor->wait_till_ready(nor); - if (ret) - return ret; - - /* Send write enable, then erase commands. */ - ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0); - if (ret) - return ret; - ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0); if (ret) return ret; @@ -849,9 +833,8 @@ static int fsl_qspi_probe(struct platform_device *pdev) ret = clk_prepare_enable(q->clk); if (ret) { - clk_disable_unprepare(q->clk_en); dev_err(dev, "can not enable the qspi clock\n"); - goto map_failed; + goto clk_failed; } /* find the irq */ @@ -905,7 +888,8 @@ static int fsl_qspi_probe(struct platform_device *pdev) nor->prepare = fsl_qspi_prep; nor->unprepare = fsl_qspi_unprep; - if (of_modalias_node(np, modalias, sizeof(modalias)) < 0) + ret = of_modalias_node(np, modalias, sizeof(modalias)); + if (ret < 0) goto map_failed; ret = of_property_read_u32(np, "spi-max-frequency", @@ -964,6 +948,7 @@ last_init_failed: irq_failed: clk_disable_unprepare(q->clk); +clk_failed: clk_disable_unprepare(q->clk_en); map_failed: dev_err(dev, "Freescale QuadSPI probe failed\n"); diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index c51ee52386a7..0f8ec3c2d015 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -26,7 +26,38 @@ /* Define max times to check status register before we give up. */ #define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ -#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16) +#define SPI_NOR_MAX_ID_LEN 6 + +struct flash_info { + /* + * This array stores the ID bytes. + * The first three bytes are the JEDIC ID. + * JEDEC ID zero means "no ID" (mostly older chips). + */ + u8 id[SPI_NOR_MAX_ID_LEN]; + u8 id_len; + + /* The size listed here is what works with SPINOR_OP_SE, which isn't + * necessarily called a "sector" by the vendor. + */ + unsigned sector_size; + u16 n_sectors; + + u16 page_size; + u16 addr_width; + + u16 flags; +#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */ +#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */ +#define SST_WRITE 0x04 /* use SST byte programming */ +#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */ +#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */ +#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ +#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ +#define USE_FSR 0x80 /* use flag status register */ +}; + +#define JEDEC_MFR(info) ((info)->id[0]) static const struct spi_device_id *spi_nor_match_id(const char *name); @@ -98,7 +129,7 @@ static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor) case SPI_NOR_FAST: case SPI_NOR_DUAL: case SPI_NOR_QUAD: - return 1; + return 8; case SPI_NOR_NORMAL: return 0; } @@ -138,13 +169,14 @@ static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) } /* Enable/disable 4-byte addressing mode. */ -static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable) +static inline int set_4byte(struct spi_nor *nor, struct flash_info *info, + int enable) { int status; bool need_wren = false; u8 cmd; - switch (JEDEC_MFR(jedec_id)) { + switch (JEDEC_MFR(info)) { case CFI_MFR_ST: /* Micron, actually */ /* Some Micron need WREN command; all will accept it */ need_wren = true; @@ -165,81 +197,74 @@ static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable) return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0); } } - -static int spi_nor_wait_till_ready(struct spi_nor *nor) +static inline int spi_nor_sr_ready(struct spi_nor *nor) { - unsigned long deadline; - int sr; - - deadline = jiffies + MAX_READY_WAIT_JIFFIES; - - do { - cond_resched(); + int sr = read_sr(nor); + if (sr < 0) + return sr; + else + return !(sr & SR_WIP); +} - sr = read_sr(nor); - if (sr < 0) - break; - else if (!(sr & SR_WIP)) - return 0; - } while (!time_after_eq(jiffies, deadline)); +static inline int spi_nor_fsr_ready(struct spi_nor *nor) +{ + int fsr = read_fsr(nor); + if (fsr < 0) + return fsr; + else + return fsr & FSR_READY; +} - return -ETIMEDOUT; +static int spi_nor_ready(struct spi_nor *nor) +{ + int sr, fsr; + sr = spi_nor_sr_ready(nor); + if (sr < 0) + return sr; + fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1; + if (fsr < 0) + return fsr; + return sr && fsr; } -static int spi_nor_wait_till_fsr_ready(struct spi_nor *nor) +/* + * Service routine to read status register until ready, or timeout occurs. + * Returns non-zero if error. + */ +static int spi_nor_wait_till_ready(struct spi_nor *nor) { unsigned long deadline; - int sr; - int fsr; + int timeout = 0, ret; deadline = jiffies + MAX_READY_WAIT_JIFFIES; - do { + while (!timeout) { + if (time_after_eq(jiffies, deadline)) + timeout = 1; + + ret = spi_nor_ready(nor); + if (ret < 0) + return ret; + if (ret) + return 0; + cond_resched(); + } - sr = read_sr(nor); - if (sr < 0) { - break; - } else if (!(sr & SR_WIP)) { - fsr = read_fsr(nor); - if (fsr < 0) - break; - if (fsr & FSR_READY) - return 0; - } - } while (!time_after_eq(jiffies, deadline)); + dev_err(nor->dev, "flash operation timed out\n"); return -ETIMEDOUT; } /* - * Service routine to read status register until ready, or timeout occurs. - * Returns non-zero if error. - */ -static int wait_till_ready(struct spi_nor *nor) -{ - return nor->wait_till_ready(nor); -} - -/* * Erase the whole flash memory * * Returns 0 if successful, non-zero otherwise. */ static int erase_chip(struct spi_nor *nor) { - int ret; - dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10)); - /* Wait until finished previous write command. */ - ret = wait_till_ready(nor); - if (ret) - return ret; - - /* Send write enable, then erase commands. */ - write_enable(nor); - return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0); } @@ -294,11 +319,17 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) /* whole-chip erase? */ if (len == mtd->size) { + write_enable(nor); + if (erase_chip(nor)) { ret = -EIO; goto erase_err; } + ret = spi_nor_wait_till_ready(nor); + if (ret) + goto erase_err; + /* REVISIT in some cases we could speed up erasing large regions * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up * to use "small sector erase", but that's not always optimal. @@ -307,6 +338,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) /* "sector"-at-a-time erase */ } else { while (len) { + write_enable(nor); + if (nor->erase(nor, addr)) { ret = -EIO; goto erase_err; @@ -314,9 +347,15 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) addr += mtd->erasesize; len -= mtd->erasesize; + + ret = spi_nor_wait_till_ready(nor); + if (ret) + goto erase_err; } } + write_disable(nor); + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); instr->state = MTD_ERASE_DONE; @@ -341,11 +380,6 @@ static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) if (ret) return ret; - /* Wait until finished previous command */ - ret = wait_till_ready(nor); - if (ret) - goto err; - status_old = read_sr(nor); if (offset < mtd->size - (mtd->size / 2)) @@ -388,11 +422,6 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) if (ret) return ret; - /* Wait until finished previous command */ - ret = wait_till_ready(nor); - if (ret) - goto err; - status_old = read_sr(nor); if (offset+len > mtd->size - (mtd->size / 64)) @@ -424,38 +453,34 @@ err: return ret; } -struct flash_info { - /* JEDEC id zero means "no ID" (most older chips); otherwise it has - * a high byte of zero plus three data bytes: the manufacturer id, - * then a two byte device id. - */ - u32 jedec_id; - u16 ext_id; - - /* The size listed here is what works with SPINOR_OP_SE, which isn't - * necessarily called a "sector" by the vendor. - */ - unsigned sector_size; - u16 n_sectors; - - u16 page_size; - u16 addr_width; - - u16 flags; -#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */ -#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */ -#define SST_WRITE 0x04 /* use SST byte programming */ -#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */ -#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */ -#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ -#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ -#define USE_FSR 0x80 /* use flag status register */ -}; - +/* Used when the "_ext_id" is two bytes at most */ #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ ((kernel_ulong_t)&(struct flash_info) { \ - .jedec_id = (_jedec_id), \ - .ext_id = (_ext_id), \ + .id = { \ + ((_jedec_id) >> 16) & 0xff, \ + ((_jedec_id) >> 8) & 0xff, \ + (_jedec_id) & 0xff, \ + ((_ext_id) >> 8) & 0xff, \ + (_ext_id) & 0xff, \ + }, \ + .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \ + .sector_size = (_sector_size), \ + .n_sectors = (_n_sectors), \ + .page_size = 256, \ + .flags = (_flags), \ + }) + +#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ + ((kernel_ulong_t)&(struct flash_info) { \ + .id = { \ + ((_jedec_id) >> 16) & 0xff, \ + ((_jedec_id) >> 8) & 0xff, \ + (_jedec_id) & 0xff, \ + ((_ext_id) >> 16) & 0xff, \ + ((_ext_id) >> 8) & 0xff, \ + (_ext_id) & 0xff, \ + }, \ + .id_len = 6, \ .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = 256, \ @@ -507,6 +532,9 @@ static const struct spi_device_id spi_nor_ids[] = { { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + /* Fujitsu */ + { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) }, + /* GigaDevice */ { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) }, @@ -532,6 +560,7 @@ static const struct spi_device_id spi_nor_ids[] = { { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, /* Micron */ + { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, @@ -556,6 +585,7 @@ static const struct spi_device_id spi_nor_ids[] = { { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, + { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) }, { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, @@ -566,6 +596,7 @@ static const struct spi_device_id spi_nor_ids[] = { { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) }, { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, + { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, 0) }, /* SST -- large erase sizes are "overlays", "sectors" are 4K */ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, @@ -577,6 +608,7 @@ static const struct spi_device_id spi_nor_ids[] = { { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) }, { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) }, { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, + { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, /* ST Microelectronics -- newer production may have feature updates */ { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) }, @@ -588,7 +620,6 @@ static const struct spi_device_id spi_nor_ids[] = { { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) }, { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) }, { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) }, - { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) }, { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) }, @@ -643,32 +674,24 @@ static const struct spi_device_id spi_nor_ids[] = { static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor) { int tmp; - u8 id[5]; - u32 jedec; - u16 ext_jedec; + u8 id[SPI_NOR_MAX_ID_LEN]; struct flash_info *info; - tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5); + tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); if (tmp < 0) { dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp); return ERR_PTR(tmp); } - jedec = id[0]; - jedec = jedec << 8; - jedec |= id[1]; - jedec = jedec << 8; - jedec |= id[2]; - - ext_jedec = id[3] << 8 | id[4]; for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { info = (void *)spi_nor_ids[tmp].driver_data; - if (info->jedec_id == jedec) { - if (info->ext_id == 0 || info->ext_id == ext_jedec) + if (info->id_len) { + if (!memcmp(info->id, id, info->id_len)) return &spi_nor_ids[tmp]; } } - dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec); + dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n", + id[0], id[1], id[2]); return ERR_PTR(-ENODEV); } @@ -703,11 +726,6 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, if (ret) return ret; - /* Wait until finished previous write command. */ - ret = wait_till_ready(nor); - if (ret) - goto time_out; - write_enable(nor); nor->sst_write_second = false; @@ -719,7 +737,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, /* write one byte. */ nor->write(nor, to, 1, retlen, buf); - ret = wait_till_ready(nor); + ret = spi_nor_wait_till_ready(nor); if (ret) goto time_out; } @@ -731,7 +749,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, /* write two bytes. */ nor->write(nor, to, 2, retlen, buf + actual); - ret = wait_till_ready(nor); + ret = spi_nor_wait_till_ready(nor); if (ret) goto time_out; to += 2; @@ -740,7 +758,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, nor->sst_write_second = false; write_disable(nor); - ret = wait_till_ready(nor); + ret = spi_nor_wait_till_ready(nor); if (ret) goto time_out; @@ -751,7 +769,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, nor->program_opcode = SPINOR_OP_BP; nor->write(nor, to, 1, retlen, buf + actual); - ret = wait_till_ready(nor); + ret = spi_nor_wait_till_ready(nor); if (ret) goto time_out; write_disable(nor); @@ -779,11 +797,6 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len, if (ret) return ret; - /* Wait until finished previous write command. */ - ret = wait_till_ready(nor); - if (ret) - goto write_err; - write_enable(nor); page_offset = to & (nor->page_size - 1); @@ -802,16 +815,20 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len, if (page_size > nor->page_size) page_size = nor->page_size; - wait_till_ready(nor); + ret = spi_nor_wait_till_ready(nor); + if (ret) + goto write_err; + write_enable(nor); nor->write(nor, to + i, page_size, retlen, buf + i); } } + ret = spi_nor_wait_till_ready(nor); write_err: spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE); - return 0; + return ret; } static int macronix_quad_enable(struct spi_nor *nor) @@ -824,7 +841,7 @@ static int macronix_quad_enable(struct spi_nor *nor) nor->cmd_buf[0] = val | SR_QUAD_EN_MX; nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0); - if (wait_till_ready(nor)) + if (spi_nor_wait_till_ready(nor)) return 1; ret = read_sr(nor); @@ -874,11 +891,11 @@ static int spansion_quad_enable(struct spi_nor *nor) return 0; } -static int set_quad_mode(struct spi_nor *nor, u32 jedec_id) +static int set_quad_mode(struct spi_nor *nor, struct flash_info *info) { int status; - switch (JEDEC_MFR(jedec_id)) { + switch (JEDEC_MFR(info)) { case CFI_MFR_MACRONIX: status = macronix_quad_enable(nor); if (status) { @@ -904,11 +921,6 @@ static int spi_nor_check(struct spi_nor *nor) return -EINVAL; } - if (!nor->read_id) - nor->read_id = spi_nor_read_id; - if (!nor->wait_till_ready) - nor->wait_till_ready = spi_nor_wait_till_ready; - return 0; } @@ -926,16 +938,24 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) if (ret) return ret; - id = spi_nor_match_id(name); - if (!id) + /* Try to auto-detect if chip name wasn't specified */ + if (!name) + id = spi_nor_read_id(nor); + else + id = spi_nor_match_id(name); + if (IS_ERR_OR_NULL(id)) return -ENOENT; info = (void *)id->driver_data; - if (info->jedec_id) { + /* + * If caller has specified name of flash model that can normally be + * detected using JEDEC, let's verify it. + */ + if (name && info->id_len) { const struct spi_device_id *jid; - jid = nor->read_id(nor); + jid = spi_nor_read_id(nor); if (IS_ERR(jid)) { return PTR_ERR(jid); } else if (jid != id) { @@ -960,9 +980,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) * up with the software protection bits set */ - if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL || - JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL || - JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) { + if (JEDEC_MFR(info) == CFI_MFR_ATMEL || + JEDEC_MFR(info) == CFI_MFR_INTEL || + JEDEC_MFR(info) == CFI_MFR_SST) { write_enable(nor); write_sr(nor, 0); } @@ -977,7 +997,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) mtd->_read = spi_nor_read; /* nor protection support for STmicro chips */ - if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) { + if (JEDEC_MFR(info) == CFI_MFR_ST) { mtd->_lock = spi_nor_lock; mtd->_unlock = spi_nor_unlock; } @@ -988,9 +1008,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) else mtd->_write = spi_nor_write; - if ((info->flags & USE_FSR) && - nor->wait_till_ready == spi_nor_wait_till_ready) - nor->wait_till_ready = spi_nor_wait_till_fsr_ready; + if (info->flags & USE_FSR) + nor->flags |= SNOR_F_USE_FSR; #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS /* prefer "small sector" erase if possible */ @@ -1031,7 +1050,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) /* Quad/Dual-read mode takes precedence over fast/normal */ if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) { - ret = set_quad_mode(nor, info->jedec_id); + ret = set_quad_mode(nor, info); if (ret) { dev_err(dev, "quad mode not supported\n"); return ret; @@ -1067,7 +1086,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) else if (mtd->size > 0x1000000) { /* enable 4-byte addressing if the device exceeds 16MiB */ nor->addr_width = 4; - if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) { + if (JEDEC_MFR(info) == CFI_MFR_AMD) { /* Dedicated 4-byte command set */ switch (nor->flash_read) { case SPI_NOR_QUAD: @@ -1088,7 +1107,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) nor->erase_opcode = SPINOR_OP_SE_4B; mtd->erasesize = info->sector_size; } else - set_4byte(nor, info->jedec_id, 1); + set_4byte(nor, info, 1); } else { nor->addr_width = 3; } diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c index dc4f9602b97e..5e061186eab1 100644 --- a/drivers/mtd/tests/oobtest.c +++ b/drivers/mtd/tests/oobtest.c @@ -34,8 +34,11 @@ #include "mtd_test.h" static int dev = -EINVAL; +static int bitflip_limit; module_param(dev, int, S_IRUGO); MODULE_PARM_DESC(dev, "MTD device number to use"); +module_param(bitflip_limit, int, S_IRUGO); +MODULE_PARM_DESC(bitflip_limit, "Max. allowed bitflips per page"); static struct mtd_info *mtd; static unsigned char *readbuf; @@ -115,12 +118,36 @@ static int write_whole_device(void) return 0; } +/* + * Display the address, offset and data bytes at comparison failure. + * Return number of bitflips encountered. + */ +static size_t memcmpshow(loff_t addr, const void *cs, const void *ct, size_t count) +{ + const unsigned char *su1, *su2; + int res; + size_t i = 0; + size_t bitflips = 0; + + for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--, i++) { + res = *su1 ^ *su2; + if (res) { + pr_info("error @addr[0x%lx:0x%zx] 0x%x -> 0x%x diff 0x%x\n", + (unsigned long)addr, i, *su1, *su2, res); + bitflips += hweight8(res); + } + } + + return bitflips; +} + static int verify_eraseblock(int ebnum) { int i; struct mtd_oob_ops ops; int err = 0; loff_t addr = (loff_t)ebnum * mtd->erasesize; + size_t bitflips; prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt); for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) { @@ -139,8 +166,11 @@ static int verify_eraseblock(int ebnum) errcnt += 1; return err ? err : -1; } - if (memcmp(readbuf, writebuf + (use_len_max * i) + use_offset, - use_len)) { + + bitflips = memcmpshow(addr, readbuf, + writebuf + (use_len_max * i) + use_offset, + use_len); + if (bitflips > bitflip_limit) { pr_err("error: verify failed at %#llx\n", (long long)addr); errcnt += 1; @@ -148,7 +178,10 @@ static int verify_eraseblock(int ebnum) pr_err("error: too many errors\n"); return -1; } + } else if (bitflips) { + pr_info("ignoring error as within bitflip_limit\n"); } + if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) { int k; @@ -167,9 +200,10 @@ static int verify_eraseblock(int ebnum) errcnt += 1; return err ? err : -1; } - if (memcmp(readbuf + use_offset, - writebuf + (use_len_max * i) + use_offset, - use_len)) { + bitflips = memcmpshow(addr, readbuf + use_offset, + writebuf + (use_len_max * i) + use_offset, + use_len); + if (bitflips > bitflip_limit) { pr_err("error: verify failed at %#llx\n", (long long)addr); errcnt += 1; @@ -177,7 +211,10 @@ static int verify_eraseblock(int ebnum) pr_err("error: too many errors\n"); return -1; } + } else if (bitflips) { + pr_info("ignoring error as within bitflip_limit\n"); } + for (k = 0; k < use_offset; ++k) if (readbuf[k] != 0xff) { pr_err("error: verify 0xff " @@ -216,6 +253,9 @@ static int verify_eraseblock_in_one_go(int ebnum) int err = 0; loff_t addr = (loff_t)ebnum * mtd->erasesize; size_t len = mtd->ecclayout->oobavail * pgcnt; + size_t oobavail = mtd->ecclayout->oobavail; + size_t bitflips; + int i; prandom_bytes_state(&rnd_state, writebuf, len); ops.mode = MTD_OPS_AUTO_OOB; @@ -226,6 +266,8 @@ static int verify_eraseblock_in_one_go(int ebnum) ops.ooboffs = 0; ops.datbuf = NULL; ops.oobbuf = readbuf; + + /* read entire block's OOB at one go */ err = mtd_read_oob(mtd, addr, &ops); if (err || ops.oobretlen != len) { pr_err("error: readoob failed at %#llx\n", @@ -233,13 +275,21 @@ static int verify_eraseblock_in_one_go(int ebnum) errcnt += 1; return err ? err : -1; } - if (memcmp(readbuf, writebuf, len)) { - pr_err("error: verify failed at %#llx\n", - (long long)addr); - errcnt += 1; - if (errcnt > 1000) { - pr_err("error: too many errors\n"); - return -1; + + /* verify one page OOB at a time for bitflip per page limit check */ + for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) { + bitflips = memcmpshow(addr, readbuf + (i * oobavail), + writebuf + (i * oobavail), oobavail); + if (bitflips > bitflip_limit) { + pr_err("error: verify failed at %#llx\n", + (long long)addr); + errcnt += 1; + if (errcnt > 1000) { + pr_err("error: too many errors\n"); + return -1; + } + } else if (bitflips) { + pr_info("ignoring error as within bitflip_limit\n"); } } @@ -610,7 +660,8 @@ static int __init mtd_oobtest_init(void) err = mtd_read_oob(mtd, addr, &ops); if (err) goto out; - if (memcmp(readbuf, writebuf, mtd->ecclayout->oobavail * 2)) { + if (memcmpshow(addr, readbuf, writebuf, + mtd->ecclayout->oobavail * 2)) { pr_err("error: verify failed at %#llx\n", (long long)addr); errcnt += 1; diff --git a/drivers/mtd/tests/torturetest.c b/drivers/mtd/tests/torturetest.c index eeab96973cf0..b55bc52a1340 100644 --- a/drivers/mtd/tests/torturetest.c +++ b/drivers/mtd/tests/torturetest.c @@ -264,7 +264,9 @@ static int __init tort_init(void) int i; void *patt; - mtdtest_erase_good_eraseblocks(mtd, bad_ebs, eb, ebcnt); + err = mtdtest_erase_good_eraseblocks(mtd, bad_ebs, eb, ebcnt); + if (err) + goto out; /* Check if the eraseblocks contain only 0xFF bytes */ if (check) { diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c index 386303dca382..dddbde4f56f4 100644 --- a/fs/jffs2/readinode.c +++ b/fs/jffs2/readinode.c @@ -224,7 +224,7 @@ static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, dbg_readinode("insert fragment %#04x-%#04x, ver %u at %08x\n", tn->fn->ofs, fn_end, tn->version, ref_offset(tn->fn->raw)); - /* If a node has zero dsize, we only have to keep if it if it might be the + /* If a node has zero dsize, we only have to keep it if it might be the node with highest version -- i.e. the one which will end up as f->metadata. Note that such nodes won't be REF_UNCHECKED since there are no data to check anyway. */ diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c index c522d098bb4f..bc5385471a6e 100644 --- a/fs/jffs2/summary.c +++ b/fs/jffs2/summary.c @@ -844,6 +844,7 @@ static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock /* Write out summary information - called from jffs2_do_reserve_space */ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c) + __must_hold(&c->erase_completion_block) { int datasize, infosize, padsize; struct jffs2_eraseblock *jeb; diff --git a/include/linux/fsl_ifc.h b/include/linux/fsl_ifc.h index 84d60cb841b1..bf0321eabbda 100644 --- a/include/linux/fsl_ifc.h +++ b/include/linux/fsl_ifc.h @@ -29,7 +29,16 @@ #include <linux/of_platform.h> #include <linux/interrupt.h> -#define FSL_IFC_BANK_COUNT 4 +/* + * The actual number of banks implemented depends on the IFC version + * - IFC version 1.0 implements 4 banks. + * - IFC version 1.1 onward implements 8 banks. + */ +#define FSL_IFC_BANK_COUNT 8 + +#define FSL_IFC_VERSION_MASK 0x0F0F0000 +#define FSL_IFC_VERSION_1_0_0 0x01000000 +#define FSL_IFC_VERSION_1_1_0 0x01010000 /* * CSPR - Chip Select Property Register @@ -776,23 +785,23 @@ struct fsl_ifc_regs { __be32 cspr; u32 res2; } cspr_cs[FSL_IFC_BANK_COUNT]; - u32 res3[0x19]; + u32 res3[0xd]; struct { __be32 amask; u32 res4[0x2]; } amask_cs[FSL_IFC_BANK_COUNT]; - u32 res5[0x18]; + u32 res5[0xc]; struct { __be32 csor; __be32 csor_ext; u32 res6; } csor_cs[FSL_IFC_BANK_COUNT]; - u32 res7[0x18]; + u32 res7[0xc]; struct { __be32 ftim[4]; u32 res8[0x8]; } ftim_cs[FSL_IFC_BANK_COUNT]; - u32 res9[0x60]; + u32 res9[0x30]; __be32 rb_stat; u32 res10[0x2]; __be32 ifc_gcr; @@ -827,6 +836,8 @@ struct fsl_ifc_ctrl { int nand_irq; spinlock_t lock; void *nand; + int version; + int banks; u32 nand_stat; wait_queue_head_t nand_wait; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index e4d451e4600b..3d4ea7eb2b68 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -455,8 +455,21 @@ struct nand_hw_control { * be provided if an hardware ECC is available * @calculate: function for ECC calculation or readback from ECC hardware * @correct: function for ECC correction, matching to ECC generator (sw/hw) - * @read_page_raw: function to read a raw page without ECC - * @write_page_raw: function to write a raw page without ECC + * @read_page_raw: function to read a raw page without ECC. This function + * should hide the specific layout used by the ECC + * controller and always return contiguous in-band and + * out-of-band data even if they're not stored + * contiguously on the NAND chip (e.g. + * NAND_ECC_HW_SYNDROME interleaves in-band and + * out-of-band data). + * @write_page_raw: function to write a raw page without ECC. This function + * should hide the specific layout used by the ECC + * controller and consider the passed data as contiguous + * in-band and out-of-band data. ECC controller is + * responsible for doing the appropriate transformations + * to adapt to its specific layout (e.g. + * NAND_ECC_HW_SYNDROME interleaves in-band and + * out-of-band data). * @read_page: function to read a page according to the ECC generator * requirements; returns maximum number of bitflips corrected in * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error @@ -723,6 +736,7 @@ struct nand_chip { #define NAND_MFR_EON 0x92 #define NAND_MFR_SANDISK 0x45 #define NAND_MFR_INTEL 0x89 +#define NAND_MFR_ATO 0x9b /* The maximum expected count of bytes in the NAND ID sequence */ #define NAND_MAX_ID_LEN 8 diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 046a0a2e4c4e..63aeccf9ddc8 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -116,6 +116,10 @@ enum spi_nor_ops { SPI_NOR_OPS_UNLOCK, }; +enum spi_nor_option_flags { + SNOR_F_USE_FSR = BIT(0), +}; + /** * struct spi_nor - Structure for defining a the SPI NOR layer * @mtd: point to a mtd_info structure @@ -129,6 +133,7 @@ enum spi_nor_ops { * @program_opcode: the program opcode * @flash_read: the mode of the read * @sst_write_second: used by the SST write operation + * @flags: flag options for the current SPI-NOR (SNOR_F_*) * @cfg: used by the read_xfer/write_xfer * @cmd_buf: used by the write_reg * @prepare: [OPTIONAL] do some preparations for the @@ -139,9 +144,6 @@ enum spi_nor_ops { * @write_xfer: [OPTIONAL] the writefundamental primitive * @read_reg: [DRIVER-SPECIFIC] read out the register * @write_reg: [DRIVER-SPECIFIC] write data to the register - * @read_id: [REPLACEABLE] read out the ID data, and find - * the proper spi_device_id - * @wait_till_ready: [REPLACEABLE] wait till the NOR becomes ready * @read: [DRIVER-SPECIFIC] read data from the SPI NOR * @write: [DRIVER-SPECIFIC] write data to the SPI NOR * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR @@ -160,6 +162,7 @@ struct spi_nor { u8 program_opcode; enum read_mode flash_read; bool sst_write_second; + u32 flags; struct spi_nor_xfer_cfg cfg; u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; @@ -172,8 +175,6 @@ struct spi_nor { int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len, int write_enable); - const struct spi_device_id *(*read_id)(struct spi_nor *nor); - int (*wait_till_ready)(struct spi_nor *nor); int (*read)(struct spi_nor *nor, loff_t from, size_t len, size_t *retlen, u_char *read_buf); |
