diff options
| -rw-r--r-- | Documentation/hwmon/k10temp | 17 | ||||
| -rw-r--r-- | drivers/hwmon/k10temp.c | 38 |
2 files changed, 43 insertions, 12 deletions
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp index a7a18d453a51..6526eee525a6 100644 --- a/Documentation/hwmon/k10temp +++ b/Documentation/hwmon/k10temp @@ -3,8 +3,8 @@ Kernel driver k10temp Supported chips: * AMD Family 10h processors: - Socket F: Quad-Core/Six-Core/Embedded Opteron - Socket AM2+: Opteron, Phenom (II) X3/X4 + Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below) + Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below) Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II Socket S1G3: Athlon II, Sempron, Turion II * AMD Family 11h processors: @@ -36,10 +36,15 @@ Description This driver permits reading of the internal temperature sensor of AMD Family 10h and 11h processors. -All these processors have a sensor, but on older revisions of Family 10h -processors, the sensor may return inconsistent values (erratum 319). The -driver will refuse to load on these revisions unless you specify the -"force=1" module parameter. +All these processors have a sensor, but on those for Socket F or AM2+, +the sensor may return inconsistent values (erratum 319). The driver +will refuse to load on these revisions unless you specify the "force=1" +module parameter. + +Due to technical reasons, the driver can detect only the mainboard's +socket type, not the processor's actual capabilities. Therefore, if you +are using an AM3 processor on an AM2+ mainboard, you can safely use the +"force=1" parameter. There is one temperature measurement value, available as temp1_input in sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree. diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index d8a26d16d948..4c9d349b3ad9 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -33,6 +33,16 @@ static bool force; module_param(force, bool, 0444); MODULE_PARM_DESC(force, "force loading on processors with erratum 319"); +/* CPUID function 0x80000001, ebx */ +#define CPUID_PKGTYPE_MASK 0xf0000000 +#define CPUID_PKGTYPE_F 0x00000000 +#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000 + +/* DRAM controller (PCI function 2) */ +#define REG_DCT0_CONFIG_HIGH 0x094 +#define DDR3_MODE 0x00000100 + +/* miscellaneous (PCI function 3) */ #define REG_HARDWARE_THERMAL_CONTROL 0x64 #define HTC_ENABLE 0x00000001 @@ -85,13 +95,28 @@ static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1); static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); -static bool __devinit has_erratum_319(void) +static bool __devinit has_erratum_319(struct pci_dev *pdev) { + u32 pkg_type, reg_dram_cfg; + + if (boot_cpu_data.x86 != 0x10) + return false; + /* - * Erratum 319: The thermal sensor of older Family 10h processors - * (B steppings) may be unreliable. + * Erratum 319: The thermal sensor of Socket F/AM2+ processors + * may be unreliable. */ - return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2; + pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK; + if (pkg_type == CPUID_PKGTYPE_F) + return true; + if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3) + return false; + + /* Differentiate between AM2+ (bad) and AM3 (good) */ + pci_bus_read_config_dword(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 2), + REG_DCT0_CONFIG_HIGH, ®_dram_cfg); + return !(reg_dram_cfg & DDR3_MODE); } static int __devinit k10temp_probe(struct pci_dev *pdev, @@ -99,9 +124,10 @@ static int __devinit k10temp_probe(struct pci_dev *pdev, { struct device *hwmon_dev; u32 reg_caps, reg_htc; + int unreliable = has_erratum_319(pdev); int err; - if (has_erratum_319() && !force) { + if (unreliable && !force) { dev_err(&pdev->dev, "unreliable CPU thermal sensor; monitoring disabled\n"); err = -ENODEV; @@ -139,7 +165,7 @@ static int __devinit k10temp_probe(struct pci_dev *pdev, } dev_set_drvdata(&pdev->dev, hwmon_dev); - if (has_erratum_319() && force) + if (unreliable && force) dev_warn(&pdev->dev, "unreliable CPU thermal sensor; check erratum 319\n"); return 0; |
