diff options
21 files changed, 1604 insertions, 1256 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 12b1d8480808..c9bba39d50bd 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -100,6 +100,7 @@ static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw) break; case e1000_82580: case e1000_i350: + case e1000_i354: case e1000_i210: case e1000_i211: reg = rd32(E1000_MDICNFG); @@ -149,6 +150,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82580: case e1000_i350: + case e1000_i354: phy->ops.read_reg = igb_read_phy_reg_82580; phy->ops.write_reg = igb_write_phy_reg_82580; break; @@ -174,13 +176,14 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw) /* Verify phy id and set remaining function pointers */ switch (phy->id) { + case M88E1545_E_PHY_ID: case I347AT4_E_PHY_ID: case M88E1112_E_PHY_ID: case M88E1111_I_PHY_ID: phy->type = e1000_phy_m88; + phy->ops.check_polarity = igb_check_polarity_m88; phy->ops.get_phy_info = igb_get_phy_info_m88; - if (phy->id == I347AT4_E_PHY_ID || - phy->id == M88E1112_E_PHY_ID) + if (phy->id != M88E1111_I_PHY_ID) phy->ops.get_cable_length = igb_get_cable_length_m88_gen2; else @@ -227,7 +230,7 @@ out: * igb_init_nvm_params_82575 - Init NVM func ptrs. * @hw: pointer to the HW structure **/ -s32 igb_init_nvm_params_82575(struct e1000_hw *hw) +static s32 igb_init_nvm_params_82575(struct e1000_hw *hw) { struct e1000_nvm_info *nvm = &hw->nvm; u32 eecd = rd32(E1000_EECD); @@ -287,6 +290,7 @@ s32 igb_init_nvm_params_82575(struct e1000_hw *hw) nvm->ops.read = igb_read_nvm_spi; nvm->ops.write = igb_write_nvm_spi; break; + case e1000_i354: case e1000_i350: nvm->ops.validate = igb_validate_nvm_checksum_i350; nvm->ops.update = igb_update_nvm_checksum_i350; @@ -352,6 +356,7 @@ static s32 igb_init_mac_params_82575(struct e1000_hw *hw) mac->rar_entry_count = E1000_RAR_ENTRIES_82580; break; case e1000_i350: + case e1000_i354: mac->rar_entry_count = E1000_RAR_ENTRIES_I350; break; default: @@ -445,14 +450,18 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) case E1000_DEV_ID_I211_COPPER: mac->type = e1000_i211; break; + case E1000_DEV_ID_I354_BACKPLANE_1GBPS: + case E1000_DEV_ID_I354_SGMII: + case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS: + mac->type = e1000_i354; + break; default: return -E1000_ERR_MAC_INIT; break; } /* Set media type */ - /* - * The 82575 uses bits 22:23 for link mode. The mode can be changed + /* The 82575 uses bits 22:23 for link mode. The mode can be changed * based on the EEPROM. We cannot rely upon device ID. There * is no distinguishable difference between fiber and internal * SerDes mode on the 82575. There can be an external PHY attached @@ -621,8 +630,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) u32 ctrl_ext; u32 mdic; - /* - * For SGMII PHYs, we try the list of possible addresses until + /* For SGMII PHYs, we try the list of possible addresses until * we find one that works. For non-SGMII PHYs * (e.g. integrated copper PHYs), an address of 1 should * work. The result of this function should mean phy->phy_addr @@ -644,6 +652,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) break; case e1000_82580: case e1000_i350: + case e1000_i354: case e1000_i210: case e1000_i211: mdic = rd32(E1000_MDICNFG); @@ -665,8 +674,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) wrfl(); msleep(300); - /* - * The address field in the I2CCMD register is 3 bits and 0 is invalid. + /* The address field in the I2CCMD register is 3 bits and 0 is invalid. * Therefore, we need to test 1-7 */ for (phy->addr = 1; phy->addr < 8; phy->addr++) { @@ -674,8 +682,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) if (ret_val == 0) { hw_dbg("Vendor ID 0x%08X read at address %u\n", phy_id, phy->addr); - /* - * At the time of this writing, The M88 part is + /* At the time of this writing, The M88 part is * the only supported SGMII PHY product. */ if (phy_id == M88_VENDOR) @@ -711,15 +718,13 @@ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) { s32 ret_val; - /* - * This isn't a true "hard" reset, but is the only reset + /* This isn't a true "hard" reset, but is the only reset * available to us at this time. */ hw_dbg("Soft resetting SGMII attached PHY...\n"); - /* - * SFP documentation requires the following to configure the SPF module + /* SFP documentation requires the following to configure the SPF module * to work on SGMII. No further documentation is given. */ ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084); @@ -774,8 +779,7 @@ static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) data &= ~IGP02E1000_PM_D0_LPLU; ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, data); - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -838,8 +842,7 @@ static s32 igb_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) } else { data &= ~E1000_82580_PM_D0_LPLU; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -867,7 +870,7 @@ static s32 igb_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) * During driver activity, SmartSpeed should be enabled so performance is * maintained. **/ -s32 igb_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) +static s32 igb_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) { struct e1000_phy_info *phy = &hw->phy; s32 ret_val = 0; @@ -877,8 +880,7 @@ s32 igb_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) if (!active) { data &= ~E1000_82580_PM_D3_LPLU; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -964,8 +966,7 @@ static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) if (!(swfw_sync & (fwmask | swmask))) break; - /* - * Firmware currently using resource (fwmask) + /* Firmware currently using resource (fwmask) * or other software thread using resource (swmask) */ igb_put_hw_semaphore(hw); @@ -1065,8 +1066,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) if (hw->phy.media_type != e1000_media_type_copper) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, &duplex); - /* - * Use this flag to determine if link needs to be checked or + /* Use this flag to determine if link needs to be checked or * not. If we have link clear the flag so that we do not * continue to check for link. */ @@ -1135,15 +1135,13 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, *speed = 0; *duplex = 0; - /* - * Read the PCS Status register for link state. For non-copper mode, + /* Read the PCS Status register for link state. For non-copper mode, * the status register is not accurate. The PCS status register is * used instead. */ pcs = rd32(E1000_PCS_LSTAT); - /* - * The link up bit determines when link is up on autoneg. The sync ok + /* The link up bit determines when link is up on autoneg. The sync ok * gets set once both sides sync up and agree upon link. Stable link * can be determined by checking for both link up and link sync ok */ @@ -1214,8 +1212,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) u32 ctrl, icr; s32 ret_val; - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection + /* Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = igb_disable_pcie_master(hw); @@ -1244,8 +1241,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) ret_val = igb_get_auto_rd_done(hw); if (ret_val) { - /* - * When auto config read does not complete, do not + /* When auto config read does not complete, do not * return with an error. This can happen in situations * where there is no eeprom and prevents getting link. */ @@ -1287,7 +1283,7 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) /* Disabling VLAN filtering */ hw_dbg("Initializing the IEEE VLAN\n"); - if (hw->mac.type == e1000_i350) + if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354)) igb_clear_vfta_i350(hw); else igb_clear_vfta(hw); @@ -1308,8 +1304,7 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) /* Setup link and flow control */ ret_val = igb_setup_link(hw); - /* - * Clear all of the statistics registers (clear on read). It is + /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there * is no link. @@ -1364,6 +1359,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) switch (hw->phy.id) { case I347AT4_E_PHY_ID: case M88E1112_E_PHY_ID: + case M88E1545_E_PHY_ID: case I210_I_PHY_ID: ret_val = igb_copper_link_setup_m88_gen2(hw); break; @@ -1412,17 +1408,17 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) return ret_val; - /* - * On the 82575, SerDes loopback mode persists until it is + /* On the 82575, SerDes loopback mode persists until it is * explicitly turned off or a power cycle is performed. A read to * the register does not indicate its status. Therefore, we ensure * loopback mode is disabled during initialization. */ wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); - /* power on the sfp cage if present */ + /* power on the sfp cage if present and turn on I2C */ ctrl_ext = rd32(E1000_CTRL_EXT); ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; + ctrl_ext |= E1000_CTRL_I2C_ENA; wr32(E1000_CTRL_EXT, ctrl_ext); ctrl_reg = rd32(E1000_CTRL); @@ -1466,8 +1462,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) pcs_autoneg = false; } - /* - * non-SGMII modes only supports a speed of 1000/Full for the + /* non-SGMII modes only supports a speed of 1000/Full for the * link so it is best to just force the MAC and let the pcs * link either autoneg or be forced to 1000/Full */ @@ -1481,8 +1476,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) wr32(E1000_CTRL, ctrl_reg); - /* - * New SerDes mode allows for forcing speed or autonegotiating speed + /* New SerDes mode allows for forcing speed or autonegotiating speed * at 1gb. Autoneg should be default set by most drivers. This is the * mode that will be compatible with older link partners and switches. * However, both are supported by the hardware and some drivers/tools. @@ -1592,8 +1586,7 @@ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw) { s32 ret_val = 0; - /* - * If there's an alternate MAC address place it in RAR0 + /* If there's an alternate MAC address place it in RAR0 * so that it will override the Si installed default perm * address. */ @@ -1777,8 +1770,7 @@ static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw) if (gcr & E1000_GCR_CMPL_TMOUT_MASK) goto out; - /* - * if capababilities version is type 1 we can write the + /* if capabilities version is type 1 we can write the * timeout of 10ms to 200ms through the GCR register */ if (!(gcr & E1000_GCR_CAP_VER2)) { @@ -1786,8 +1778,7 @@ static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw) goto out; } - /* - * for version 2 capabilities we need to write the config space + /* for version 2 capabilities we need to write the config space * directly in order to set the completion timeout value for * 16ms to 55ms */ @@ -1825,6 +1816,7 @@ void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf) reg_offset = E1000_DTXSWC; break; case e1000_i350: + case e1000_i354: reg_offset = E1000_TXSWC; break; default: @@ -1866,6 +1858,7 @@ void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable) dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; wr32(E1000_DTXSWC, dtxswc); break; + case e1000_i354: case e1000_i350: dtxswc = rd32(E1000_TXSWC); if (enable) @@ -1879,7 +1872,6 @@ void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable) break; } - } /** @@ -1914,7 +1906,6 @@ static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) { s32 ret_val; - ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; @@ -2016,8 +2007,7 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw) /* Get current control state. */ ctrl = rd32(E1000_CTRL); - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection + /* Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = igb_disable_pcie_master(hw); @@ -2052,8 +2042,7 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw) ret_val = igb_get_auto_rd_done(hw); if (ret_val) { - /* - * When auto config read does not complete, do not + /* When auto config read does not complete, do not * return with an error. This can happen in situations * where there is no eeprom and prevents getting link. */ @@ -2197,7 +2186,8 @@ static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw) if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) { /* if checksums compatibility bit is set validate checksums - * for all 4 ports. */ + * for all 4 ports. + */ eeprom_regions_count = 4; } @@ -2309,6 +2299,41 @@ out: } /** + * __igb_access_emi_reg - Read/write EMI register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: pointer to value to read/write from/to the EMI address + * @read: boolean flag to indicate read or write + **/ +static s32 __igb_access_emi_reg(struct e1000_hw *hw, u16 address, + u16 *data, bool read) +{ + s32 ret_val = E1000_SUCCESS; + + ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address); + if (ret_val) + return ret_val; + + if (read) + ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data); + else + ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data); + + return ret_val; +} + +/** + * igb_read_emi_reg - Read Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be read from the EMI address + **/ +s32 igb_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data) +{ + return __igb_access_emi_reg(hw, addr, data, true); +} + +/** * igb_set_eee_i350 - Enable/disable EEE support * @hw: pointer to the HW structure * @@ -2338,7 +2363,6 @@ s32 igb_set_eee_i350(struct e1000_hw *hw) if (eee_su & E1000_EEE_SU_LPI_CLK_STP) hw_dbg("LPI Clock Stop Bit should not be set!\n"); - } else { ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); @@ -2355,6 +2379,108 @@ out: return ret_val; } +/** + * igb_set_eee_i354 - Enable/disable EEE support + * @hw: pointer to the HW structure + * + * Enable/disable EEE legacy mode based on setting in dev_spec structure. + * + **/ +s32 igb_set_eee_i354(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 phy_data; + + if ((hw->phy.media_type != e1000_media_type_copper) || + (phy->id != M88E1545_E_PHY_ID)) + goto out; + + if (!hw->dev_spec._82575.eee_disable) { + /* Switch to PHY page 18. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1545_PAGE_ADDR, 18); + if (ret_val) + goto out; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1545_EEE_CTRL_1, + &phy_data); + if (ret_val) + goto out; + + phy_data |= E1000_M88E1545_EEE_CTRL_1_MS; + ret_val = phy->ops.write_reg(hw, E1000_M88E1545_EEE_CTRL_1, + phy_data); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1545_PAGE_ADDR, 0); + if (ret_val) + goto out; + + /* Turn on EEE advertisement. */ + ret_val = igb_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + phy_data |= E1000_EEE_ADV_100_SUPPORTED | + E1000_EEE_ADV_1000_SUPPORTED; + ret_val = igb_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + phy_data); + } else { + /* Turn off EEE advertisement. */ + ret_val = igb_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED | + E1000_EEE_ADV_1000_SUPPORTED); + ret_val = igb_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + phy_data); + } + +out: + return ret_val; +} + +/** + * igb_get_eee_status_i354 - Get EEE status + * @hw: pointer to the HW structure + * @status: EEE status + * + * Get EEE status by guessing based on whether Tx or Rx LPI indications have + * been received. + **/ +s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 phy_data; + + /* Check if EEE is supported on this device. */ + if ((hw->phy.media_type != e1000_media_type_copper) || + (phy->id != M88E1545_E_PHY_ID)) + goto out; + + ret_val = igb_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354, + E1000_PCS_STATUS_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + *status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD | + E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false; + +out: + return ret_val; +} + static const u8 e1000_emc_temp_data[4] = { E1000_EMC_INTERNAL_DATA, E1000_EMC_DIODE1_DATA, @@ -2368,11 +2494,12 @@ static const u8 e1000_emc_therm_limit[4] = { E1000_EMC_DIODE3_THERM_LIMIT }; -/* igb_get_thermal_sensor_data_generic - Gathers thermal sensor data +/** + * igb_get_thermal_sensor_data_generic - Gathers thermal sensor data * @hw: pointer to hardware structure * * Updates the temperatures in mac.thermal_sensor_data - */ + **/ s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw) { s32 status = E1000_SUCCESS; @@ -2420,12 +2547,13 @@ s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw) return status; } -/* igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds +/** + * igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds * @hw: pointer to hardware structure * * Sets the thermal sensor thresholds according to the NVM map * and save off the threshold and location values into mac.thermal_sensor_data - */ + **/ s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw) { s32 status = E1000_SUCCESS; diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h index 73ab41f0e032..74a1506b4235 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.h +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h @@ -263,7 +263,9 @@ void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *, bool, int); void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool); void igb_vmdq_set_replication_pf(struct e1000_hw *, bool); u16 igb_rxpbs_adjust_82580(u32 data); +s32 igb_read_emi_reg(struct e1000_hw *, u16 addr, u16 *data); s32 igb_set_eee_i350(struct e1000_hw *); +s32 igb_set_eee_i354(struct e1000_hw *); s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *); s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw); diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 7e13337d3b9d..31a0f82cc650 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -138,8 +138,7 @@ #define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ #define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ -/* - * Use byte values for the following shift parameters +/* Use byte values for the following shift parameters * Usage: * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & * E1000_PSRCTL_BSIZE0_MASK) | @@ -237,11 +236,14 @@ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* BMC external code execution disabled */ +#define E1000_STATUS_2P5_SKU 0x00001000 /* Val of 2.5GBE SKU strap */ +#define E1000_STATUS_2P5_SKU_OVER 0x00002000 /* Val of 2.5GBE SKU Over */ /* Constants used to intrepret the masked PCI-X bus speed. */ #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 +#define SPEED_2500 2500 #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 @@ -382,8 +384,7 @@ #define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ /* TCP Timer */ -/* - * This defines the bits that are set in the Interrupt Mask +/* This defines the bits that are set in the Interrupt Mask * Set/Read Register. Each bit is documented below: * o RXT0 = Receiver Timer Interrupt (ring 0) * o TXDW = Transmit Descriptor Written Back @@ -440,8 +441,7 @@ #define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ /* Receive Address */ -/* - * Number of high/low register pairs in the RAR. The RAR (Receive Address +/* Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. * Technically, we have 16 spots. However, we reserve one of these spots * (RAR[15]) for our directed address used by controllers with @@ -760,8 +760,7 @@ #define MAX_PHY_MULTI_PAGE_REG 0xF /* Bit definitions for valid PHY IDs. */ -/* - * I = Integrated +/* I = Integrated * E = External */ #define M88E1111_I_PHY_ID 0x01410CC0 @@ -772,6 +771,7 @@ #define I350_I_PHY_ID 0x015403B0 #define M88_VENDOR 0x0141 #define I210_I_PHY_ID 0x01410C00 +#define M88E1545_E_PHY_ID 0x01410EA0 /* M88E1000 Specific Registers */ #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ @@ -791,8 +791,7 @@ #define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* Auto crossover enabled all speeds */ #define M88E1000_PSCR_AUTO_X_MODE 0x0060 -/* - * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold +/* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold * 0=Normal 10BASE-T Rx Threshold */ /* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */ @@ -802,8 +801,7 @@ #define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ #define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ #define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ -/* - * 0 = <50M +/* 0 = <50M * 1 = 50-80M * 2 = 80-110M * 3 = 110-140M @@ -816,20 +814,17 @@ #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 /* M88E1000 Extended PHY Specific Control Register */ -/* - * 1 = Lost lock detect enabled. +/* 1 = Lost lock detect enabled. * Will assert lost lock and bring * link down if idle not seen * within 1ms in 1000BASE-T */ -/* - * Number of times we will attempt to autonegotiate before downshifting if we +/* Number of times we will attempt to autonegotiate before downshifting if we * are the master */ #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 -/* - * Number of times we will attempt to autonegotiate before downshifting if we +/* Number of times we will attempt to autonegotiate before downshifting if we * are the slave */ #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 @@ -844,8 +839,7 @@ /* i347-AT4 Extended PHY Specific Control Register */ -/* - * Number of times we will attempt to autonegotiate before downshifting if we +/* Number of times we will attempt to autonegotiate before downshifting if we * are the master */ #define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800 @@ -895,6 +889,22 @@ #define E1000_EEER_LPI_FC 0x00040000 /* EEE Enable on FC */ #define E1000_EEE_SU_LPI_CLK_STP 0X00800000 /* EEE LPI Clock Stop */ #define E1000_EEER_EEE_NEG 0x20000000 /* EEE capability nego */ +#define E1000_EEE_LP_ADV_ADDR_I350 0x040F /* EEE LP Advertisement */ +#define E1000_EEE_LP_ADV_DEV_I210 7 /* EEE LP Adv Device */ +#define E1000_EEE_LP_ADV_ADDR_I210 61 /* EEE LP Adv Register */ +#define E1000_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */ +#define E1000_M88E1545_PAGE_ADDR 0x16 /* Page Offset Register */ +#define E1000_M88E1545_EEE_CTRL_1 0x0 +#define E1000_M88E1545_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */ +#define E1000_EEE_ADV_DEV_I354 7 +#define E1000_EEE_ADV_ADDR_I354 60 +#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */ +#define E1000_EEE_ADV_1000_SUPPORTED (1 << 2) /* 1000BaseT EEE Supported */ +#define E1000_PCS_STATUS_DEV_I354 3 +#define E1000_PCS_STATUS_ADDR_I354 1 +#define E1000_PCS_STATUS_TX_LPI_IND 0x0200 /* Tx in LPI state */ +#define E1000_PCS_STATUS_RX_LPI_RCVD 0x0400 +#define E1000_PCS_STATUS_TX_LPI_RCVD 0x0800 /* SerDes Control */ #define E1000_GEN_CTL_READY 0x80000000 diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index 0d5cf9c63d0d..1138ccaf95ff 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -38,31 +38,31 @@ struct e1000_hw; -#define E1000_DEV_ID_82576 0x10C9 -#define E1000_DEV_ID_82576_FIBER 0x10E6 -#define E1000_DEV_ID_82576_SERDES 0x10E7 -#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 -#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526 -#define E1000_DEV_ID_82576_NS 0x150A -#define E1000_DEV_ID_82576_NS_SERDES 0x1518 -#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D -#define E1000_DEV_ID_82575EB_COPPER 0x10A7 -#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 -#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 -#define E1000_DEV_ID_82580_COPPER 0x150E -#define E1000_DEV_ID_82580_FIBER 0x150F -#define E1000_DEV_ID_82580_SERDES 0x1510 -#define E1000_DEV_ID_82580_SGMII 0x1511 -#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516 -#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527 -#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438 -#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A -#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C -#define E1000_DEV_ID_DH89XXCC_SFP 0x0440 -#define E1000_DEV_ID_I350_COPPER 0x1521 -#define E1000_DEV_ID_I350_FIBER 0x1522 -#define E1000_DEV_ID_I350_SERDES 0x1523 -#define E1000_DEV_ID_I350_SGMII 0x1524 +#define E1000_DEV_ID_82576 0x10C9 +#define E1000_DEV_ID_82576_FIBER 0x10E6 +#define E1000_DEV_ID_82576_SERDES 0x10E7 +#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 +#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526 +#define E1000_DEV_ID_82576_NS 0x150A +#define E1000_DEV_ID_82576_NS_SERDES 0x1518 +#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D +#define E1000_DEV_ID_82575EB_COPPER 0x10A7 +#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 +#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 +#define E1000_DEV_ID_82580_COPPER 0x150E +#define E1000_DEV_ID_82580_FIBER 0x150F +#define E1000_DEV_ID_82580_SERDES 0x1510 +#define E1000_DEV_ID_82580_SGMII 0x1511 +#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516 +#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527 +#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438 +#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A +#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C +#define E1000_DEV_ID_DH89XXCC_SFP 0x0440 +#define E1000_DEV_ID_I350_COPPER 0x1521 +#define E1000_DEV_ID_I350_FIBER 0x1522 +#define E1000_DEV_ID_I350_SERDES 0x1523 +#define E1000_DEV_ID_I350_SGMII 0x1524 #define E1000_DEV_ID_I210_COPPER 0x1533 #define E1000_DEV_ID_I210_COPPER_OEM1 0x1534 #define E1000_DEV_ID_I210_COPPER_IT 0x1535 @@ -70,6 +70,9 @@ struct e1000_hw; #define E1000_DEV_ID_I210_SERDES 0x1537 #define E1000_DEV_ID_I210_SGMII 0x1538 #define E1000_DEV_ID_I211_COPPER 0x1539 +#define E1000_DEV_ID_I354_BACKPLANE_1GBPS 0x1F40 +#define E1000_DEV_ID_I354_SGMII 0x1F41 +#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS 0x1F45 #define E1000_REVISION_2 2 #define E1000_REVISION_4 4 @@ -90,6 +93,7 @@ enum e1000_mac_type { e1000_82576, e1000_82580, e1000_i350, + e1000_i354, e1000_i210, e1000_i211, e1000_num_macs /* List is 1-based, so subtract 1 for true count. */ @@ -98,7 +102,8 @@ enum e1000_mac_type { enum e1000_media_type { e1000_media_type_unknown = 0, e1000_media_type_copper = 1, - e1000_media_type_internal_serdes = 2, + e1000_media_type_fiber = 2, + e1000_media_type_internal_serdes = 3, e1000_num_media_types }; diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index 6a42344f24f1..9764cd3610e5 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -103,7 +103,7 @@ void igb_release_nvm_i210(struct e1000_hw *hw) * @hw: pointer to the HW structure * * Release hardware semaphore used to access the PHY or NVM - */ + **/ static void igb_put_hw_semaphore_i210(struct e1000_hw *hw) { u32 swsm; @@ -141,9 +141,7 @@ s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask) if (!(swfw_sync & fwmask)) break; - /* - * Firmware currently using resource (fwmask) - */ + /* Firmware currently using resource (fwmask) */ igb_put_hw_semaphore_i210(hw); mdelay(5); i++; @@ -203,7 +201,8 @@ s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words, /* We cannot hold synchronization semaphores for too long, * because of forceful takeover procedure. However it is more efficient - * to read in bursts than synchronizing access for each word. */ + * to read in bursts than synchronizing access for each word. + */ for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? E1000_EERD_EEWR_MAX_COUNT : (words - i); @@ -242,8 +241,7 @@ static s32 igb_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words, u32 attempts = 100000; s32 ret_val = E1000_SUCCESS; - /* - * A check for invalid values: offset too large, too many words, + /* A check for invalid values: offset too large, too many words, * too many words for the offset, and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || @@ -294,7 +292,7 @@ out: * * If error code is returned, data and Shadow RAM may be inconsistent - buffer * partially written. - */ + **/ s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { @@ -326,7 +324,7 @@ s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words, /** * igb_read_nvm_i211 - Read NVM wrapper function for I211 * @hw: pointer to the HW structure - * @address: the word address (aka eeprom offset) to read + * @words: number of words to read * @data: pointer to the data read * * Wrapper function to return data formerly found in the NVM. @@ -549,8 +547,7 @@ s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw) if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { - /* - * Replace the read function with semaphore grabbing with + /* Replace the read function with semaphore grabbing with * the one that skips this for a while. * We have semaphore taken already here. */ @@ -570,7 +567,6 @@ s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw) return status; } - /** * igb_update_nvm_checksum_i210 - Update EEPROM checksum * @hw: pointer to the HW structure @@ -585,8 +581,7 @@ s32 igb_update_nvm_checksum_i210(struct e1000_hw *hw) u16 checksum = 0; u16 i, nvm_data; - /* - * Read the first word from the EEPROM. If this times out or fails, do + /* Read the first word from the EEPROM. If this times out or fails, do * not continue or we could be in for a very long wait while every * EEPROM read fails */ @@ -597,8 +592,7 @@ s32 igb_update_nvm_checksum_i210(struct e1000_hw *hw) } if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { - /* - * Do not use hw->nvm.ops.write, hw->nvm.ops.read + /* Do not use hw->nvm.ops.write, hw->nvm.ops.read * because we do not want to take the synchronization * semaphores twice here. */ @@ -635,7 +629,7 @@ out: * igb_pool_flash_update_done_i210 - Pool FLUDONE status. * @hw: pointer to the HW structure * - */ + **/ static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw) { s32 ret_val = -E1000_ERR_NVM; @@ -714,3 +708,68 @@ s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data) out: return ret_val; } + +/** + * __igb_access_xmdio_reg - Read/write XMDIO register + * @hw: pointer to the HW structure + * @address: XMDIO address to program + * @dev_addr: device address to program + * @data: pointer to value to read/write from/to the XMDIO address + * @read: boolean flag to indicate read or write + **/ +static s32 __igb_access_xmdio_reg(struct e1000_hw *hw, u16 address, + u8 dev_addr, u16 *data, bool read) +{ + s32 ret_val = E1000_SUCCESS; + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA | + dev_addr); + if (ret_val) + return ret_val; + + if (read) + ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data); + else + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data); + if (ret_val) + return ret_val; + + /* Recalibrate the device back to 0 */ + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0); + if (ret_val) + return ret_val; + + return ret_val; +} + +/** + * igb_read_xmdio_reg - Read XMDIO register + * @hw: pointer to the HW structure + * @addr: XMDIO address to program + * @dev_addr: device address to program + * @data: value to be read from the EMI address + **/ +s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data) +{ + return __igb_access_xmdio_reg(hw, addr, dev_addr, data, true); +} + +/** + * igb_write_xmdio_reg - Write XMDIO register + * @hw: pointer to the HW structure + * @addr: XMDIO address to program + * @dev_addr: device address to program + * @data: value to be written to the XMDIO address + **/ +s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data) +{ + return __igb_access_xmdio_reg(hw, addr, dev_addr, &data, false); +} diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h index e4e1a73b7c75..bfc08e05c907 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.h +++ b/drivers/net/ethernet/intel/igb/e1000_i210.h @@ -45,6 +45,10 @@ extern s32 igb_read_nvm_i211(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); extern s32 igb_read_invm_version(struct e1000_hw *hw, struct e1000_fw_version *invm_ver); +extern s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, + u16 *data); +extern s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, + u16 data); #define E1000_STM_OPCODE 0xDB00 #define E1000_EEPROM_FLASH_SIZE_WORD 0x11 diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c index a5c7200b9a71..2559d70a2321 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.c +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c @@ -214,7 +214,7 @@ s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add) else vfta &= ~mask; } - if (hw->mac.type == e1000_i350) + if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354)) igb_write_vfta_i350(hw, index, vfta); else igb_write_vfta(hw, index, vfta); @@ -230,8 +230,8 @@ s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add) * Checks the nvm for an alternate MAC address. An alternate MAC address * can be setup by pre-boot software and must be treated like a permanent * address and must override the actual permanent MAC address. If an - * alternate MAC address is fopund it is saved in the hw struct and - * prgrammed into RAR0 and the cuntion returns success, otherwise the + * alternate MAC address is found it is saved in the hw struct and + * programmed into RAR0 and the function returns success, otherwise the * function returns an error. **/ s32 igb_check_alt_mac_addr(struct e1000_hw *hw) @@ -241,8 +241,7 @@ s32 igb_check_alt_mac_addr(struct e1000_hw *hw) u16 offset, nvm_alt_mac_addr_offset, nvm_data; u8 alt_mac_addr[ETH_ALEN]; - /* - * Alternate MAC address is handled by the option ROM for 82580 + /* Alternate MAC address is handled by the option ROM for 82580 * and newer. SW support not required. */ if (hw->mac.type >= e1000_82580) @@ -285,8 +284,7 @@ s32 igb_check_alt_mac_addr(struct e1000_hw *hw) goto out; } - /* - * We have a valid alternate MAC address, and we want to treat it the + /* We have a valid alternate MAC address, and we want to treat it the * same as the normal permanent MAC address stored by the HW into the * RAR. Do this by mapping this address into RAR0. */ @@ -309,8 +307,7 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; - /* - * HW expects these in little endian so we reverse the byte order + /* HW expects these in little endian so we reverse the byte order * from network order (big endian) to little endian */ rar_low = ((u32) addr[0] | @@ -323,8 +320,7 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) if (rar_low || rar_high) rar_high |= E1000_RAH_AV; - /* - * Some bridges will combine consecutive 32-bit writes into + /* Some bridges will combine consecutive 32-bit writes into * a single burst write, which will malfunction on some parts. * The flushes avoid this. */ @@ -348,8 +344,7 @@ void igb_mta_set(struct e1000_hw *hw, u32 hash_value) { u32 hash_bit, hash_reg, mta; - /* - * The MTA is a register array of 32-bit registers. It is + /* The MTA is a register array of 32-bit registers. It is * treated like an array of (32*mta_reg_count) bits. We want to * set bit BitArray[hash_value]. So we figure out what register * the bit is in, read it, OR in the new bit, then write @@ -386,15 +381,13 @@ static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) /* Register count multiplied by bits per register */ hash_mask = (hw->mac.mta_reg_count * 32) - 1; - /* - * For a mc_filter_type of 0, bit_shift is the number of left-shifts + /* For a mc_filter_type of 0, bit_shift is the number of left-shifts * where 0xFF would still fall within the hash mask. */ while (hash_mask >> bit_shift != 0xFF) bit_shift++; - /* - * The portion of the address that is used for the hash table + /* The portion of the address that is used for the hash table * is determined by the mc_filter_type setting. * The algorithm is such that there is a total of 8 bits of shifting. * The bit_shift for a mc_filter_type of 0 represents the number of @@ -536,8 +529,7 @@ s32 igb_check_for_copper_link(struct e1000_hw *hw) s32 ret_val; bool link; - /* - * We only want to go out to the PHY registers to see if Auto-Neg + /* We only want to go out to the PHY registers to see if Auto-Neg * has completed and/or if our link status has changed. The * get_link_status flag is set upon receiving a Link Status * Change or Rx Sequence Error interrupt. @@ -547,8 +539,7 @@ s32 igb_check_for_copper_link(struct e1000_hw *hw) goto out; } - /* - * First we want to see if the MII Status Register reports + /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex * of the PHY. */ @@ -561,14 +552,12 @@ s32 igb_check_for_copper_link(struct e1000_hw *hw) mac->get_link_status = false; - /* - * Check if there was DownShift, must be checked + /* Check if there was DownShift, must be checked * immediately after link-up */ igb_check_downshift(hw); - /* - * If we are forcing speed/duplex, then we simply return since + /* If we are forcing speed/duplex, then we simply return since * we have already determined whether we have link or not. */ if (!mac->autoneg) { @@ -576,15 +565,13 @@ s32 igb_check_for_copper_link(struct e1000_hw *hw) goto out; } - /* - * Auto-Neg is enabled. Auto Speed Detection takes care + /* Auto-Neg is enabled. Auto Speed Detection takes care * of MAC speed/duplex configuration. So we only need to * configure Collision Distance in the MAC. */ igb_config_collision_dist(hw); - /* - * Configure Flow Control now that Auto-Neg has completed. + /* Configure Flow Control now that Auto-Neg has completed. * First, we need to restore the desired flow control * settings because we may have had to re-autoneg with a * different link partner. @@ -611,15 +598,13 @@ s32 igb_setup_link(struct e1000_hw *hw) { s32 ret_val = 0; - /* - * In the case of the phy reset being blocked, we already have a link. + /* In the case of the phy reset being blocked, we already have a link. * We do not need to set it up again. */ if (igb_check_reset_block(hw)) goto out; - /* - * If requested flow control is set to default, set flow control + /* If requested flow control is set to default, set flow control * based on the EEPROM flow control settings. */ if (hw->fc.requested_mode == e1000_fc_default) { @@ -628,8 +613,7 @@ s32 igb_setup_link(struct e1000_hw *hw) goto out; } - /* - * We want to save off the original Flow Control configuration just + /* We want to save off the original Flow Control configuration just * in case we get disconnected and then reconnected into a different * hub or switch with different Flow Control capabilities. */ @@ -642,8 +626,7 @@ s32 igb_setup_link(struct e1000_hw *hw) if (ret_val) goto out; - /* - * Initialize the flow control address, type, and PAUSE timer + /* Initialize the flow control address, type, and PAUSE timer * registers to their default values. This is done even if flow * control is disabled, because it does not hurt anything to * initialize these registers. @@ -696,16 +679,14 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw) s32 ret_val = 0; u32 fcrtl = 0, fcrth = 0; - /* - * Set the flow control receive threshold registers. Normally, + /* Set the flow control receive threshold registers. Normally, * these registers will be set to a default threshold that may be * adjusted later by the driver's runtime code. However, if the * ability to transmit pause frames is not enabled, then these * registers will be set to 0. */ if (hw->fc.current_mode & e1000_fc_tx_pause) { - /* - * We need to set up the Receive Threshold high and low water + /* We need to set up the Receive Threshold high and low water * marks as well as (optionally) enabling the transmission of * XON frames. */ @@ -733,8 +714,7 @@ static s32 igb_set_default_fc(struct e1000_hw *hw) s32 ret_val = 0; u16 nvm_data; - /* - * Read and store word 0x0F of the EEPROM. This word contains bits + /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or * disabling auto-negotiation, and the direction of the @@ -778,8 +758,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) ctrl = rd32(E1000_CTRL); - /* - * Because we didn't get link via the internal auto-negotiation + /* Because we didn't get link via the internal auto-negotiation * mechanism (we either forced link or we got link via PHY * auto-neg), we have to manually enable/disable transmit an * receive flow control. @@ -843,8 +822,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; u16 speed, duplex; - /* - * Check for the case where we have fiber media and auto-neg failed + /* Check for the case where we have fiber media and auto-neg failed * so we had to force link. In this case, we need to force the * configuration of the MAC to match the "fc" parameter. */ @@ -861,15 +839,13 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) goto out; } - /* - * Check for the case where we have copper media and auto-neg is + /* Check for the case where we have copper media and auto-neg is * enabled. In this case, we need to check and see if Auto-Neg * has completed, and if so, how the PHY and link partner has * flow control configured. */ if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { - /* - * Read the MII Status Register and check to see if AutoNeg + /* Read the MII Status Register and check to see if AutoNeg * has completed. We read this twice because this reg has * some "sticky" (latched) bits. */ @@ -888,8 +864,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) goto out; } - /* - * The AutoNeg process has completed, so we now need to + /* The AutoNeg process has completed, so we now need to * read both the Auto Negotiation Advertisement * Register (Address 4) and the Auto_Negotiation Base * Page Ability Register (Address 5) to determine how @@ -904,8 +879,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) if (ret_val) goto out; - /* - * Two bits in the Auto Negotiation Advertisement Register + /* Two bits in the Auto Negotiation Advertisement Register * (Address 4) and two bits in the Auto Negotiation Base * Page Ability Register (Address 5) determine flow control * for both the PHY and the link partner. The following @@ -940,8 +914,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) */ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { - /* - * Now we need to check if the user selected RX ONLY + /* Now we need to check if the user selected RX ONLY * of pause frames. In this case, we had to advertise * FULL flow control because we could not advertise RX * ONLY. Hence, we must now check to see if we need to @@ -956,8 +929,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) "RX PAUSE frames only.\r\n"); } } - /* - * For receiving PAUSE frames ONLY. + /* For receiving PAUSE frames ONLY. * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result @@ -971,8 +943,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) hw->fc.current_mode = e1000_fc_tx_pause; hw_dbg("Flow Control = TX PAUSE frames only.\r\n"); } - /* - * For transmitting PAUSE frames ONLY. + /* For transmitting PAUSE frames ONLY. * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result @@ -986,8 +957,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) hw->fc.current_mode = e1000_fc_rx_pause; hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); } - /* - * Per the IEEE spec, at this point flow control should be + /* Per the IEEE spec, at this point flow control should be * disabled. However, we want to consider that we could * be connected to a legacy switch that doesn't advertise * desired flow control, but can be forced on the link @@ -1007,9 +977,9 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) * be asked to delay transmission of packets than asking * our link partner to pause transmission of frames. */ - else if ((hw->fc.requested_mode == e1000_fc_none || - hw->fc.requested_mode == e1000_fc_tx_pause) || - hw->fc.strict_ieee) { + else if ((hw->fc.requested_mode == e1000_fc_none) || + (hw->fc.requested_mode == e1000_fc_tx_pause) || + (hw->fc.strict_ieee)) { hw->fc.current_mode = e1000_fc_none; hw_dbg("Flow Control = NONE.\r\n"); } else { @@ -1017,8 +987,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); } - /* - * Now we need to do one last check... If we auto- + /* Now we need to do one last check... If we auto- * negotiated to HALF DUPLEX, flow control should not be * enabled per IEEE 802.3 spec. */ @@ -1031,8 +1000,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) if (duplex == HALF_DUPLEX) hw->fc.current_mode = e1000_fc_none; - /* - * Now we call a subroutine to actually force the MAC + /* Now we call a subroutine to actually force the MAC * controller to use the correct flow control settings. */ ret_val = igb_force_mac_fc(hw); @@ -1203,6 +1171,17 @@ s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, hw_dbg("Half Duplex\n"); } + /* Check if it is an I354 2.5Gb backplane connection. */ + if (hw->mac.type == e1000_i354) { + if ((status & E1000_STATUS_2P5_SKU) && + !(status & E1000_STATUS_2P5_SKU_OVER)) { + *speed = SPEED_2500; + *duplex = FULL_DUPLEX; + hw_dbg("2500 Mbs, "); + hw_dbg("Full Duplex\n"); + } + } + return 0; } @@ -1427,8 +1406,7 @@ s32 igb_blink_led(struct e1000_hw *hw) u32 ledctl_blink = 0; u32 i; - /* - * set the blink bit for each LED that's "on" (0x0E) + /* set the blink bit for each LED that's "on" (0x0E) * in ledctl_mode2 */ ledctl_blink = hw->mac.ledctl_mode2; @@ -1467,7 +1445,7 @@ s32 igb_led_off(struct e1000_hw *hw) * @hw: pointer to the HW structure * * Returns 0 (0) if successful, else returns -10 - * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued + * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused * the master requests to be disabled. * * Disables PCI-Express master access and verifies there are no pending diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.h b/drivers/net/ethernet/intel/igb/e1000_mac.h index e6d6ce433261..5e13e83cc608 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.h +++ b/drivers/net/ethernet/intel/igb/e1000_mac.h @@ -35,8 +35,7 @@ #include "e1000_defines.h" #include "e1000_i210.h" -/* - * Functions that should not be called directly from drivers but can be used +/* Functions that should not be called directly from drivers but can be used * by other files in this 'shared code' */ s32 igb_blink_led(struct e1000_hw *hw); @@ -49,15 +48,15 @@ s32 igb_get_auto_rd_done(struct e1000_hw *hw); s32 igb_get_bus_info_pcie(struct e1000_hw *hw); s32 igb_get_hw_semaphore(struct e1000_hw *hw); s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, - u16 *duplex); + u16 *duplex); s32 igb_id_led_init(struct e1000_hw *hw); s32 igb_led_off(struct e1000_hw *hw); void igb_update_mc_addr_list(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count); + u8 *mc_addr_list, u32 mc_addr_count); s32 igb_setup_link(struct e1000_hw *hw); s32 igb_validate_mdi_setting(struct e1000_hw *hw); s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, - u32 offset, u8 data); + u32 offset, u8 data); void igb_clear_hw_cntrs_base(struct e1000_hw *hw); void igb_clear_vfta(struct e1000_hw *hw); @@ -80,12 +79,12 @@ enum e1000_mng_mode { e1000_mng_mode_host_if_only }; -#define E1000_FACTPS_MNGCG 0x20000000 +#define E1000_FACTPS_MNGCG 0x20000000 -#define E1000_FWSM_MODE_MASK 0xE -#define E1000_FWSM_MODE_SHIFT 1 +#define E1000_FWSM_MODE_MASK 0xE +#define E1000_FWSM_MODE_SHIFT 1 -#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); diff --git a/drivers/net/ethernet/intel/igb/e1000_mbx.c b/drivers/net/ethernet/intel/igb/e1000_mbx.c index 38e0df350904..dac1447fabf7 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mbx.c +++ b/drivers/net/ethernet/intel/igb/e1000_mbx.c @@ -196,7 +196,8 @@ out: * returns SUCCESS if it successfully received a message notification and * copied it into the receive buffer. **/ -static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, + u16 mbx_id) { struct e1000_mbx_info *mbx = &hw->mbx; s32 ret_val = -E1000_ERR_MBX; @@ -222,7 +223,8 @@ out: * returns SUCCESS if it successfully copied message into the buffer and * received an ack to that message within delay * timeout period **/ -static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, + u16 mbx_id) { struct e1000_mbx_info *mbx = &hw->mbx; s32 ret_val = -E1000_ERR_MBX; @@ -325,7 +327,6 @@ static s32 igb_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number) s32 ret_val = -E1000_ERR_MBX; u32 p2v_mailbox; - /* Take ownership of the buffer */ wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU); @@ -347,7 +348,7 @@ static s32 igb_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number) * returns SUCCESS if it successfully copied message into the buffer **/ static s32 igb_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, - u16 vf_number) + u16 vf_number) { s32 ret_val; u16 i; @@ -388,7 +389,7 @@ out_no_write: * a message due to a VF request so no polling for message is needed. **/ static s32 igb_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, - u16 vf_number) + u16 vf_number) { s32 ret_val; u16 i; diff --git a/drivers/net/ethernet/intel/igb/e1000_mbx.h b/drivers/net/ethernet/intel/igb/e1000_mbx.h index c13b56d9edb2..de9bba41acf3 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mbx.h +++ b/drivers/net/ethernet/intel/igb/e1000_mbx.h @@ -30,42 +30,42 @@ #include "e1000_hw.h" -#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */ -#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ -#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ -#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ -#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ +#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */ +#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ +#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ -#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */ -#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ -#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */ -#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ +#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */ +#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ +#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */ +#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ -#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ +#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ /* If it's a E1000_VF_* msg then it originates in the VF and is sent to the * PF. The reverse is true if it is E1000_PF_*. * Message ACK's are the value or'd with 0xF0000000 */ -#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with - * this are the ACK */ -#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with - * this are the NACK */ -#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still - clear to send requests */ -#define E1000_VT_MSGINFO_SHIFT 16 +/* Messages below or'd with this are the ACK */ +#define E1000_VT_MSGTYPE_ACK 0x80000000 +/* Messages below or'd with this are the NACK */ +#define E1000_VT_MSGTYPE_NACK 0x40000000 +/* Indicates that VF is still clear to send requests */ +#define E1000_VT_MSGTYPE_CTS 0x20000000 +#define E1000_VT_MSGINFO_SHIFT 16 /* bits 23:16 are used for exra info for certain messages */ -#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) +#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) -#define E1000_VF_RESET 0x01 /* VF requests reset */ -#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */ -#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */ -#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */ -#define E1000_VF_SET_LPE 0x05 /* VF requests to set VMOLR.LPE */ -#define E1000_VF_SET_PROMISC 0x06 /*VF requests to clear VMOLR.ROPE/MPME*/ -#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_RESET 0x01 /* VF requests reset */ +#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */ +#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */ +#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */ +#define E1000_VF_SET_LPE 0x05 /* VF requests to set VMOLR.LPE */ +#define E1000_VF_SET_PROMISC 0x06 /*VF requests to clear VMOLR.ROPE/MPME*/ +#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT) -#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */ +#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */ s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16); s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16); diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.c b/drivers/net/ethernet/intel/igb/e1000_nvm.c index 5b62adbe134d..7f9cd7cbd353 100644 --- a/drivers/net/ethernet/intel/igb/e1000_nvm.c +++ b/drivers/net/ethernet/intel/igb/e1000_nvm.c @@ -289,15 +289,14 @@ static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw) udelay(1); timeout = NVM_MAX_RETRY_SPI; - /* - * Read "Status Register" repeatedly until the LSB is cleared. + /* Read "Status Register" repeatedly until the LSB is cleared. * The EEPROM will signal that the command has been completed * by clearing bit 0 of the internal status register. If it's * not cleared within 'timeout', then error out. */ while (timeout) { igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, - hw->nvm.opcode_bits); + hw->nvm.opcode_bits); spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8); if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) break; @@ -335,8 +334,7 @@ s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) u16 word_in; u8 read_opcode = NVM_READ_OPCODE_SPI; - /* - * A check for invalid values: offset too large, too many words, + /* A check for invalid values: offset too large, too many words, * and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || @@ -363,8 +361,7 @@ s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits); igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits); - /* - * Read the data. SPI NVMs increment the address with each byte + /* Read the data. SPI NVMs increment the address with each byte * read and will roll over if reading beyond the end. This allows * us to read the whole NVM from any offset */ @@ -395,8 +392,7 @@ s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) u32 i, eerd = 0; s32 ret_val = 0; - /* - * A check for invalid values: offset too large, too many words, + /* A check for invalid values: offset too large, too many words, * and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || @@ -408,7 +404,7 @@ s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) for (i = 0; i < words; i++) { eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + - E1000_NVM_RW_REG_START; + E1000_NVM_RW_REG_START; wr32(E1000_EERD, eerd); ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); @@ -441,8 +437,7 @@ s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) s32 ret_val = -E1000_ERR_NVM; u16 widx = 0; - /* - * A check for invalid values: offset too large, too many words, + /* A check for invalid values: offset too large, too many words, * and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || @@ -472,8 +467,7 @@ s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) igb_standby_nvm(hw); - /* - * Some SPI eeproms use the 8th address bit embedded in the + /* Some SPI eeproms use the 8th address bit embedded in the * opcode */ if ((nvm->address_bits == 8) && (offset >= 128)) @@ -538,8 +532,7 @@ s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size) goto out; } - /* - * if nvm_data is not ptr guard the PBA must be in legacy format which + /* if nvm_data is not ptr guard the PBA must be in legacy format which * means pointer is actually our second data word for the PBA number * and we can decode it into an ascii string */ @@ -728,6 +721,7 @@ void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) case e1000_82575: case e1000_82576: case e1000_82580: + case e1000_i354: case e1000_i350: case e1000_i210: break; @@ -746,6 +740,7 @@ void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) switch (hw->mac.type) { case e1000_i210: + case e1000_i354: case e1000_i350: /* find combo image version */ hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset); diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index 2918c979b5bb..fd46add6c4e4 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -33,29 +33,29 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw); static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, - u16 *phy_ctrl); + u16 *phy_ctrl); static s32 igb_wait_autoneg(struct e1000_hw *hw); static s32 igb_set_master_slave_mode(struct e1000_hw *hw); /* Cable length tables */ -static const u16 e1000_m88_cable_length_table[] = - { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; +static const u16 e1000_m88_cable_length_table[] = { + 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; #define M88E1000_CABLE_LENGTH_TABLE_SIZE \ - (sizeof(e1000_m88_cable_length_table) / \ - sizeof(e1000_m88_cable_length_table[0])) - -static const u16 e1000_igp_2_cable_length_table[] = - { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, - 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, - 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, - 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, - 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, - 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, - 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, - 104, 109, 114, 118, 121, 124}; + (sizeof(e1000_m88_cable_length_table) / \ + sizeof(e1000_m88_cable_length_table[0])) + +static const u16 e1000_igp_2_cable_length_table[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, + 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, + 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, + 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, + 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, + 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, + 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, + 104, 109, 114, 118, 121, 124}; #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ - (sizeof(e1000_igp_2_cable_length_table) / \ - sizeof(e1000_igp_2_cable_length_table[0])) + (sizeof(e1000_igp_2_cable_length_table) / \ + sizeof(e1000_igp_2_cable_length_table[0])) /** * igb_check_reset_block - Check if PHY reset is blocked @@ -71,8 +71,7 @@ s32 igb_check_reset_block(struct e1000_hw *hw) manc = rd32(E1000_MANC); - return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? - E1000_BLK_PHY_RESET : 0; + return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : 0; } /** @@ -149,8 +148,7 @@ s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) goto out; } - /* - * Set up Op-code, Phy Address, and register offset in the MDI + /* Set up Op-code, Phy Address, and register offset in the MDI * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ @@ -160,8 +158,7 @@ s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) wr32(E1000_MDIC, mdic); - /* - * Poll the ready bit to see if the MDI read completed + /* Poll the ready bit to see if the MDI read completed * Increasing the time out as testing showed failures with * the lower time out */ @@ -207,8 +204,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) goto out; } - /* - * Set up Op-code, Phy Address, and register offset in the MDI + /* Set up Op-code, Phy Address, and register offset in the MDI * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ @@ -219,8 +215,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) wr32(E1000_MDIC, mdic); - /* - * Poll the ready bit to see if the MDI read completed + /* Poll the ready bit to see if the MDI read completed * Increasing the time out as testing showed failures with * the lower time out */ @@ -259,15 +254,13 @@ s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data) struct e1000_phy_info *phy = &hw->phy; u32 i, i2ccmd = 0; - - /* - * Set up Op-code, Phy Address, and register address in the I2CCMD + /* Set up Op-code, Phy Address, and register address in the I2CCMD * register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | - (E1000_I2CCMD_OPCODE_READ)); + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + (E1000_I2CCMD_OPCODE_READ)); wr32(E1000_I2CCMD, i2ccmd); @@ -317,15 +310,14 @@ s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) /* Swap the data bytes for the I2C interface */ phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00); - /* - * Set up Op-code, Phy Address, and register address in the I2CCMD + /* Set up Op-code, Phy Address, and register address in the I2CCMD * register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | - E1000_I2CCMD_OPCODE_WRITE | - phy_data_swapped); + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | + phy_data_swapped); wr32(E1000_I2CCMD, i2ccmd); @@ -371,8 +363,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) if (offset > MAX_PHY_MULTI_PAGE_REG) { ret_val = igb_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (u16)offset); + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); if (ret_val) { hw->phy.ops.release(hw); goto out; @@ -410,8 +402,8 @@ s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) if (offset > MAX_PHY_MULTI_PAGE_REG) { ret_val = igb_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (u16)offset); + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); if (ret_val) { hw->phy.ops.release(hw); goto out; @@ -419,7 +411,7 @@ s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) } ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); + data); hw->phy.ops.release(hw); @@ -439,7 +431,6 @@ s32 igb_copper_link_setup_82580(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - if (phy->reset_disable) { ret_val = 0; goto out; @@ -472,8 +463,7 @@ s32 igb_copper_link_setup_82580(struct e1000_hw *hw) if (ret_val) goto out; phy_data &= ~I82580_PHY_CTRL2_MDIX_CFG_MASK; - /* - * Options: + /* Options: * 0 - Auto (default) * 1 - MDI mode * 2 - MDI-X mode @@ -520,8 +510,7 @@ s32 igb_copper_link_setup_m88(struct e1000_hw *hw) phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - /* - * Options: + /* Options: * MDI/MDI-X = 0 (default) * 0 - Auto for all speeds * 1 - MDI mode @@ -546,8 +535,7 @@ s32 igb_copper_link_setup_m88(struct e1000_hw *hw) break; } - /* - * Options: + /* Options: * disable_polarity_correction = 0 (default) * Automatic Correction for Reversed Cable Polarity * 0 - Disabled @@ -562,12 +550,11 @@ s32 igb_copper_link_setup_m88(struct e1000_hw *hw) goto out; if (phy->revision < E1000_REVISION_4) { - /* - * Force TX_CLK in the Extended PHY Specific Control Register + /* Force TX_CLK in the Extended PHY Specific Control Register * to 25MHz clock. */ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - &phy_data); + &phy_data); if (ret_val) goto out; @@ -630,8 +617,7 @@ s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw) if (ret_val) goto out; - /* - * Options: + /* Options: * MDI/MDI-X = 0 (default) * 0 - Auto for all speeds * 1 - MDI mode @@ -659,8 +645,7 @@ s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw) break; } - /* - * Options: + /* Options: * disable_polarity_correction = 0 (default) * Automatic Correction for Reversed Cable Polarity * 0 - Disabled @@ -714,14 +699,12 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw) goto out; } - /* - * Wait 100ms for MAC to configure PHY from NVM settings, to avoid + /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid * timeout issues when LFS is enabled. */ msleep(100); - /* - * The NVM settings will configure LPLU in D3 for + /* The NVM settings will configure LPLU in D3 for * non-IGP1 PHYs. */ if (phy->type == e1000_phy_igp) { @@ -765,8 +748,7 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw) /* set auto-master slave resolution settings */ if (hw->mac.autoneg) { - /* - * when autonegotiation advertisement is only 1000Mbps then we + /* when autonegotiation advertisement is only 1000Mbps then we * should disable SmartSpeed and enable Auto MasterSlave * resolution as hardware default. */ @@ -844,14 +826,12 @@ static s32 igb_copper_link_autoneg(struct e1000_hw *hw) s32 ret_val; u16 phy_ctrl; - /* - * Perform some bounds checking on the autoneg advertisement + /* Perform some bounds checking on the autoneg advertisement * parameter. */ phy->autoneg_advertised &= phy->autoneg_mask; - /* - * If autoneg_advertised is zero, we assume it was not defaulted + /* If autoneg_advertised is zero, we assume it was not defaulted * by the calling code so we set to advertise full capability. */ if (phy->autoneg_advertised == 0) @@ -865,8 +845,7 @@ static s32 igb_copper_link_autoneg(struct e1000_hw *hw) } hw_dbg("Restarting Auto-Neg\n"); - /* - * Restart auto-negotiation by setting the Auto Neg Enable bit and + /* Restart auto-negotiation by setting the Auto Neg Enable bit and * the Auto Neg Restart bit in the PHY control register. */ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); @@ -878,8 +857,7 @@ static s32 igb_copper_link_autoneg(struct e1000_hw *hw) if (ret_val) goto out; - /* - * Does the user want to wait for Auto-Neg to complete here, or + /* Does the user want to wait for Auto-Neg to complete here, or * check at a later time (for example, callback routine). */ if (phy->autoneg_wait_to_complete) { @@ -928,16 +906,14 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) goto out; } - /* - * Need to parse both autoneg_advertised and fc and set up + /* Need to parse both autoneg_advertised and fc and set up * the appropriate PHY registers. First we will parse for * autoneg_advertised software override. Since we can advertise * a plethora of combinations, we need to check each bit * individually. */ - /* - * First we clear all the 10/100 mb speed bits in the Auto-Neg + /* First we clear all the 10/100 mb speed bits in the Auto-Neg * Advertisement Register (Address 4) and the 1000 mb speed bits in * the 1000Base-T Control Register (Address 9). */ @@ -983,8 +959,7 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; } - /* - * Check for a software override of the flow control settings, and + /* Check for a software override of the flow control settings, and * setup the PHY advertisement registers accordingly. If * auto-negotiation is enabled, then software will have to set the * "PAUSE" bits to the correct value in the Auto-Negotiation @@ -1003,15 +978,13 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) */ switch (hw->fc.current_mode) { case e1000_fc_none: - /* - * Flow control (RX & TX) is completely disabled by a + /* Flow control (RX & TX) is completely disabled by a * software over-ride. */ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; case e1000_fc_rx_pause: - /* - * RX Flow control is enabled, and TX Flow control is + /* RX Flow control is enabled, and TX Flow control is * disabled, by a software over-ride. * * Since there really isn't a way to advertise that we are @@ -1023,16 +996,14 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; case e1000_fc_tx_pause: - /* - * TX Flow control is enabled, and RX Flow control is + /* TX Flow control is enabled, and RX Flow control is * disabled, by a software over-ride. */ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; break; case e1000_fc_full: - /* - * Flow control (both RX and TX) is enabled by a software + /* Flow control (both RX and TX) is enabled by a software * over-ride. */ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); @@ -1075,18 +1046,15 @@ s32 igb_setup_copper_link(struct e1000_hw *hw) s32 ret_val; bool link; - if (hw->mac.autoneg) { - /* - * Setup autoneg and flow control advertisement and perform + /* Setup autoneg and flow control advertisement and perform * autonegotiation. */ ret_val = igb_copper_link_autoneg(hw); if (ret_val) goto out; } else { - /* - * PHY will be set to 10H, 10F, 100H or 100F + /* PHY will be set to 10H, 10F, 100H or 100F * depending on user settings. */ hw_dbg("Forcing Speed and Duplex\n"); @@ -1097,14 +1065,10 @@ s32 igb_setup_copper_link(struct e1000_hw *hw) } } - /* - * Check link status. Wait up to 100 microseconds for link to become + /* Check link status. Wait up to 100 microseconds for link to become * valid. */ - ret_val = igb_phy_has_link(hw, - COPPER_LINK_UP_LIMIT, - 10, - &link); + ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link); if (ret_val) goto out; @@ -1145,8 +1109,7 @@ s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw) if (ret_val) goto out; - /* - * Clear Auto-Crossover to force MDI manually. IGP requires MDI + /* Clear Auto-Crossover to force MDI manually. IGP requires MDI * forced whenever speed and duplex are forced. */ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); @@ -1167,10 +1130,7 @@ s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n"); - ret_val = igb_phy_has_link(hw, - PHY_FORCE_LIMIT, - 100000, - &link); + ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link); if (ret_val) goto out; @@ -1178,10 +1138,7 @@ s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw) hw_dbg("Link taking longer than expected.\n"); /* Try once more */ - ret_val = igb_phy_has_link(hw, - PHY_FORCE_LIMIT, - 100000, - &link); + ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link); if (ret_val) goto out; } @@ -1209,8 +1166,7 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) /* I210 and I211 devices support Auto-Crossover in forced operation. */ if (phy->type != e1000_phy_i210) { - /* - * Clear Auto-Crossover to force MDI manually. M88E1000 + /* Clear Auto-Crossover to force MDI manually. M88E1000 * requires MDI forced whenever speed and duplex are forced. */ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, @@ -1266,13 +1222,12 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (!reset_dsp) hw_dbg("Link taking longer than expected.\n"); else { - /* - * We didn't get link. + /* We didn't get link. * Reset the DSP and cross our fingers. */ ret_val = phy->ops.write_reg(hw, - M88E1000_PHY_PAGE_SELECT, - 0x001d); + M88E1000_PHY_PAGE_SELECT, + 0x001d); if (ret_val) goto out; ret_val = igb_phy_reset_dsp(hw); @@ -1298,8 +1253,7 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (ret_val) goto out; - /* - * Resetting the phy means we need to re-force TX_CLK in the + /* Resetting the phy means we need to re-force TX_CLK in the * Extended PHY Specific Control Register to 25MHz clock from * the reset value of 2.5MHz. */ @@ -1308,8 +1262,7 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (ret_val) goto out; - /* - * In addition, we must re-enable CRS on Tx for both half and full + /* In addition, we must re-enable CRS on Tx for both half and full * duplex. */ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); @@ -1336,7 +1289,7 @@ out: * take affect. **/ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, - u16 *phy_ctrl) + u16 *phy_ctrl) { struct e1000_mac_info *mac = &hw->mac; u32 ctrl; @@ -1417,8 +1370,7 @@ s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active) data); if (ret_val) goto out; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -1461,13 +1413,13 @@ s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active) /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); + &data); if (ret_val) goto out; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - data); + data); } out: @@ -1556,8 +1508,7 @@ static s32 igb_check_polarity_igp(struct e1000_hw *hw) s32 ret_val; u16 data, offset, mask; - /* - * Polarity is determined based on the speed of + /* Polarity is determined based on the speed of * our connection. */ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); @@ -1569,8 +1520,7 @@ static s32 igb_check_polarity_igp(struct e1000_hw *hw) offset = IGP01E1000_PHY_PCS_INIT_REG; mask = IGP01E1000_PHY_POLARITY_MASK; } else { - /* - * This really only applies to 10Mbps since + /* This really only applies to 10Mbps since * there is no polarity for 100Mbps (always 0). */ offset = IGP01E1000_PHY_PORT_STATUS; @@ -1589,7 +1539,7 @@ out: } /** - * igb_wait_autoneg - Wait for auto-neg compeletion + * igb_wait_autoneg - Wait for auto-neg completion * @hw: pointer to the HW structure * * Waits for auto-negotiation to complete or for the auto-negotiation time @@ -1613,8 +1563,7 @@ static s32 igb_wait_autoneg(struct e1000_hw *hw) msleep(100); } - /* - * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation + /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation * has completed. */ return ret_val; @@ -1630,21 +1579,19 @@ static s32 igb_wait_autoneg(struct e1000_hw *hw) * Polls the PHY status register for link, 'iterations' number of times. **/ s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, - u32 usec_interval, bool *success) + u32 usec_interval, bool *success) { s32 ret_val = 0; u16 i, phy_status; for (i = 0; i < iterations; i++) { - /* - * Some PHYs require the PHY_STATUS register to be read + /* Some PHYs require the PHY_STATUS register to be read * twice due to the link bit being sticky. No harm doing * it across the board. */ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); if (ret_val) { - /* - * If the first read fails, another entity may have + /* If the first read fails, another entity may have * ownership of the resources, wait and try again to * see if they have relinquished the resources yet. */ @@ -1735,6 +1682,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw) phy->max_cable_length = phy_data / (is_cm ? 100 : 1); phy->cable_length = phy_data / (is_cm ? 100 : 1); break; + case M88E1545_E_PHY_ID: case I347AT4_E_PHY_ID: /* Remember the original page select and set it to 7 */ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, @@ -1834,10 +1782,10 @@ s32 igb_get_cable_length_igp_2(struct e1000_hw *hw) u16 cur_agc_index, max_agc_index = 0; u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { - IGP02E1000_PHY_AGC_A, - IGP02E1000_PHY_AGC_B, - IGP02E1000_PHY_AGC_C, - IGP02E1000_PHY_AGC_D + IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D }; /* Read the AGC registers for all channels */ @@ -1846,8 +1794,7 @@ s32 igb_get_cable_length_igp_2(struct e1000_hw *hw) if (ret_val) goto out; - /* - * Getting bits 15:9, which represent the combination of + /* Getting bits 15:9, which represent the combination of * coarse and fine gain values. The result is a number * that can be put into the lookup table to obtain the * approximate cable length. @@ -2167,15 +2114,13 @@ s32 igb_phy_init_script_igp3(struct e1000_hw *hw) hw->phy.ops.write_reg(hw, 0x1796, 0x0008); /* Change cg_icount + enable integbp for channels BCD */ hw->phy.ops.write_reg(hw, 0x1798, 0xD008); - /* - * Change cg_icount + enable integbp + change prop_factor_master + /* Change cg_icount + enable integbp + change prop_factor_master * to 8 for channel A */ hw->phy.ops.write_reg(hw, 0x1898, 0xD918); /* Disable AHT in Slave mode on channel A */ hw->phy.ops.write_reg(hw, 0x187A, 0x0800); - /* - * Enable LPLU and disable AN to 1000 in non-D0a states, + /* Enable LPLU and disable AN to 1000 in non-D0a states, * Enable SPD+B2B */ hw->phy.ops.write_reg(hw, 0x0019, 0x008D); @@ -2257,8 +2202,8 @@ static s32 igb_check_polarity_82580(struct e1000_hw *hw) if (!ret_val) phy->cable_polarity = (data & I82580_PHY_STATUS2_REV_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; return ret_val; } @@ -2278,7 +2223,6 @@ s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw) u16 phy_data; bool link; - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); if (ret_val) goto out; @@ -2289,8 +2233,7 @@ s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw) if (ret_val) goto out; - /* - * Clear Auto-Crossover to force MDI manually. 82580 requires MDI + /* Clear Auto-Crossover to force MDI manually. 82580 requires MDI * forced whenever speed and duplex are forced. */ ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data); @@ -2310,10 +2253,7 @@ s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n"); - ret_val = igb_phy_has_link(hw, - PHY_FORCE_LIMIT, - 100000, - &link); + ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link); if (ret_val) goto out; @@ -2321,10 +2261,7 @@ s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw) hw_dbg("Link taking longer than expected.\n"); /* Try once more */ - ret_val = igb_phy_has_link(hw, - PHY_FORCE_LIMIT, - 100000, - &link); + ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link); if (ret_val) goto out; } @@ -2349,7 +2286,6 @@ s32 igb_get_phy_info_82580(struct e1000_hw *hw) u16 data; bool link; - ret_val = igb_phy_has_link(hw, 1, 0, &link); if (ret_val) goto out; @@ -2383,12 +2319,12 @@ s32 igb_get_phy_info_82580(struct e1000_hw *hw) goto out; phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; } else { phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; phy->local_rx = e1000_1000t_rx_status_undefined; @@ -2412,13 +2348,12 @@ s32 igb_get_cable_length_82580(struct e1000_hw *hw) s32 ret_val; u16 phy_data, length; - ret_val = phy->ops.read_reg(hw, I82580_PHY_DIAG_STATUS, &phy_data); if (ret_val) goto out; length = (phy_data & I82580_DSTATUS_CABLE_LENGTH) >> - I82580_DSTATUS_CABLE_LENGTH_SHIFT; + I82580_DSTATUS_CABLE_LENGTH_SHIFT; if (length == E1000_CABLE_LENGTH_UNDEFINED) ret_val = -E1000_ERR_PHY; diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index 15343286082e..82632c6c53af 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -65,6 +65,7 @@ #define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ #define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ #define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_LEDMUX 0x08130 /* LED MUX Control */ #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ #define E1000_PBS 0x01008 /* Packet Buffer Size */ #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ @@ -83,6 +84,9 @@ #define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */ #define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */ #define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */ +#define E1000_MPHY_ADDR_CTRL 0x0024 /* GbE MPHY Address Control */ +#define E1000_MPHY_DATA 0x0E10 /* GBE MPHY Data */ +#define E1000_MPHY_STAT 0x0E0C /* GBE MPHY Statistics */ /* IEEE 1588 TIMESYNCH */ #define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ @@ -117,21 +121,21 @@ #define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40)) /* DMA Coalescing registers */ -#define E1000_DMACR 0x02508 /* Control Register */ -#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */ -#define E1000_DMCTLX 0x02514 /* Time to Lx Request */ -#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */ -#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */ -#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */ -#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ +#define E1000_DMACR 0x02508 /* Control Register */ +#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */ +#define E1000_DMCTLX 0x02514 /* Time to Lx Request */ +#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */ +#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */ +#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */ +#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ /* TX Rate Limit Registers */ -#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select - WO */ -#define E1000_RTTBCNRM 0x3690 /* Tx BCN Rate-scheduler MMW */ -#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config - WO */ +#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select - WO */ +#define E1000_RTTBCNRM 0x3690 /* Tx BCN Rate-scheduler MMW */ +#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config - WO */ /* Split and Replication RX Control - RW */ -#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ +#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ /* Thermal sensor configuration and status registers */ #define E1000_THMJT 0x08100 /* Junction Temperature */ @@ -140,8 +144,7 @@ #define E1000_THHIGHTC 0x0810C /* High Threshold Control */ #define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ -/* - * Convenience macros +/* Convenience macros * * Note: "_n" is the queue number of the register to be written to. * @@ -287,7 +290,7 @@ #define E1000_RFCTL 0x05008 /* Receive Filter Control*/ #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ #define E1000_RA 0x05400 /* Receive Address - RW Array */ -#define E1000_RA2 0x054E0 /* 2nd half of receive address array - RW Array */ +#define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */ #define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4)) #define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ (0x054E0 + ((_i - 16) * 8))) @@ -360,21 +363,25 @@ (readl(hw->hw_addr + reg + ((offset) << 2))) /* DMA Coalescing registers */ -#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ +#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ /* Energy Efficient Ethernet "EEE" register */ -#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */ -#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet */ -#define E1000_EEE_SU 0X0E34 /* EEE Setup */ +#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */ +#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet */ +#define E1000_EEE_SU 0X0E34 /* EEE Setup */ +#define E1000_EMIADD 0x10 /* Extended Memory Indirect Address */ +#define E1000_EMIDATA 0x11 /* Extended Memory Indirect Data */ +#define E1000_MMDAC 13 /* MMD Access Control */ +#define E1000_MMDAAD 14 /* MMD Access Address/Data */ /* Thermal Sensor Register */ -#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ +#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ /* OS2BMC Registers */ -#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */ -#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */ -#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */ -#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */ +#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */ +#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */ +#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */ +#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */ #define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */ #define E1000_I210_FLMNGCTL 0x12038 diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 25151401c2ab..c92115e71ebe 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -44,54 +44,54 @@ struct igb_adapter; -#define E1000_PCS_CFG_IGN_SD 1 +#define E1000_PCS_CFG_IGN_SD 1 /* Interrupt defines */ -#define IGB_START_ITR 648 /* ~6000 ints/sec */ -#define IGB_4K_ITR 980 -#define IGB_20K_ITR 196 -#define IGB_70K_ITR 56 +#define IGB_START_ITR 648 /* ~6000 ints/sec */ +#define IGB_4K_ITR 980 +#define IGB_20K_ITR 196 +#define IGB_70K_ITR 56 /* TX/RX descriptor defines */ -#define IGB_DEFAULT_TXD 256 -#define IGB_DEFAULT_TX_WORK 128 -#define IGB_MIN_TXD 80 -#define IGB_MAX_TXD 4096 +#define IGB_DEFAULT_TXD 256 +#define IGB_DEFAULT_TX_WORK 128 +#define IGB_MIN_TXD 80 +#define IGB_MAX_TXD 4096 -#define IGB_DEFAULT_RXD 256 -#define IGB_MIN_RXD 80 -#define IGB_MAX_RXD 4096 +#define IGB_DEFAULT_RXD 256 +#define IGB_MIN_RXD 80 +#define IGB_MAX_RXD 4096 -#define IGB_DEFAULT_ITR 3 /* dynamic */ -#define IGB_MAX_ITR_USECS 10000 -#define IGB_MIN_ITR_USECS 10 -#define NON_Q_VECTORS 1 -#define MAX_Q_VECTORS 8 +#define IGB_DEFAULT_ITR 3 /* dynamic */ +#define IGB_MAX_ITR_USECS 10000 +#define IGB_MIN_ITR_USECS 10 +#define NON_Q_VECTORS 1 +#define MAX_Q_VECTORS 8 /* Transmit and receive queues */ -#define IGB_MAX_RX_QUEUES 8 -#define IGB_MAX_RX_QUEUES_82575 4 -#define IGB_MAX_RX_QUEUES_I211 2 -#define IGB_MAX_TX_QUEUES 8 -#define IGB_MAX_VF_MC_ENTRIES 30 -#define IGB_MAX_VF_FUNCTIONS 8 -#define IGB_MAX_VFTA_ENTRIES 128 -#define IGB_82576_VF_DEV_ID 0x10CA -#define IGB_I350_VF_DEV_ID 0x1520 +#define IGB_MAX_RX_QUEUES 8 +#define IGB_MAX_RX_QUEUES_82575 4 +#define IGB_MAX_RX_QUEUES_I211 2 +#define IGB_MAX_TX_QUEUES 8 +#define IGB_MAX_VF_MC_ENTRIES 30 +#define IGB_MAX_VF_FUNCTIONS 8 +#define IGB_MAX_VFTA_ENTRIES 128 +#define IGB_82576_VF_DEV_ID 0x10CA +#define IGB_I350_VF_DEV_ID 0x1520 /* NVM version defines */ -#define IGB_MAJOR_MASK 0xF000 -#define IGB_MINOR_MASK 0x0FF0 -#define IGB_BUILD_MASK 0x000F -#define IGB_COMB_VER_MASK 0x00FF -#define IGB_MAJOR_SHIFT 12 -#define IGB_MINOR_SHIFT 4 -#define IGB_COMB_VER_SHFT 8 -#define IGB_NVM_VER_INVALID 0xFFFF -#define IGB_ETRACK_SHIFT 16 -#define NVM_ETRACK_WORD 0x0042 -#define NVM_COMB_VER_OFF 0x0083 -#define NVM_COMB_VER_PTR 0x003d +#define IGB_MAJOR_MASK 0xF000 +#define IGB_MINOR_MASK 0x0FF0 +#define IGB_BUILD_MASK 0x000F +#define IGB_COMB_VER_MASK 0x00FF +#define IGB_MAJOR_SHIFT 12 +#define IGB_MINOR_SHIFT 4 +#define IGB_COMB_VER_SHFT 8 +#define IGB_NVM_VER_INVALID 0xFFFF +#define IGB_ETRACK_SHIFT 16 +#define NVM_ETRACK_WORD 0x0042 +#define NVM_COMB_VER_OFF 0x0083 +#define NVM_COMB_VER_PTR 0x003d struct vf_data_storage { unsigned char vf_mac_addresses[ETH_ALEN]; @@ -103,6 +103,7 @@ struct vf_data_storage { u16 pf_vlan; /* When set, guest VLAN config not allowed. */ u16 pf_qos; u16 tx_rate; + bool spoofchk_enabled; }; #define IGB_VF_FLAG_CTS 0x00000001 /* VF is clear to send data */ @@ -121,14 +122,14 @@ struct vf_data_storage { * descriptors until either it has this many to write back, or the * ITR timer expires. */ -#define IGB_RX_PTHRESH 8 -#define IGB_RX_HTHRESH 8 -#define IGB_TX_PTHRESH 8 -#define IGB_TX_HTHRESH 1 -#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \ - adapter->msix_entries) ? 1 : 4) -#define IGB_TX_WTHRESH ((hw->mac.type == e1000_82576 && \ - adapter->msix_entries) ? 1 : 16) +#define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : 8) +#define IGB_RX_HTHRESH 8 +#define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8) +#define IGB_TX_HTHRESH 1 +#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \ + adapter->msix_entries) ? 1 : 4) +#define IGB_TX_WTHRESH ((hw->mac.type == e1000_82576 && \ + adapter->msix_entries) ? 1 : 16) /* this is the size past which hardware will drop packets when setting LPE=0 */ #define MAXIMUM_ETHERNET_VLAN_SIZE 1522 @@ -140,17 +141,17 @@ struct vf_data_storage { #define IGB_RX_BUFSZ IGB_RXBUFFER_2048 /* How many Rx Buffers do we bundle into one write to the hardware ? */ -#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ +#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ -#define AUTO_ALL_MODES 0 -#define IGB_EEPROM_APME 0x0400 +#define AUTO_ALL_MODES 0 +#define IGB_EEPROM_APME 0x0400 #ifndef IGB_MASTER_SLAVE /* Switch to override PHY master/slave setting */ #define IGB_MASTER_SLAVE e1000_ms_hw_default #endif -#define IGB_MNG_VLAN_NONE -1 +#define IGB_MNG_VLAN_NONE -1 enum igb_tx_flags { /* cmd_type flags */ @@ -164,11 +165,10 @@ enum igb_tx_flags { }; /* VLAN info */ -#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000 +#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000 #define IGB_TX_FLAGS_VLAN_SHIFT 16 -/* - * The largest size we can write to the descriptor is 65535. In order to +/* The largest size we can write to the descriptor is 65535. In order to * maintain a power of two alignment we have to limit ourselves to 32K. */ #define IGB_MAX_TXD_PWR 15 @@ -178,8 +178,17 @@ enum igb_tx_flags { #define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGB_MAX_DATA_PER_TXD) #define DESC_NEEDED (MAX_SKB_FRAGS + 4) +/* EEPROM byte offsets */ +#define IGB_SFF_8472_SWAP 0x5C +#define IGB_SFF_8472_COMP 0x5E + +/* Bitmasks */ +#define IGB_SFF_ADDRESSING_MODE 0x4 +#define IGB_SFF_8472_UNSUP 0x00 + /* wrapper around a pointer to a socket buffer, - * so a DMA handle can be stored along with the buffer */ + * so a DMA handle can be stored along with the buffer + */ struct igb_tx_buffer { union e1000_adv_tx_desc *next_to_watch; unsigned long time_stamp; @@ -298,11 +307,11 @@ enum e1000_ring_flags_t { #define IGB_TXD_DCMD (E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_RS) -#define IGB_RX_DESC(R, i) \ +#define IGB_RX_DESC(R, i) \ (&(((union e1000_adv_rx_desc *)((R)->desc))[i])) -#define IGB_TX_DESC(R, i) \ +#define IGB_TX_DESC(R, i) \ (&(((union e1000_adv_tx_desc *)((R)->desc))[i])) -#define IGB_TX_CTXTDESC(R, i) \ +#define IGB_TX_CTXTDESC(R, i) \ (&(((struct e1000_adv_tx_context_desc *)((R)->desc))[i])) /* igb_test_staterr - tests bits within Rx descriptor status and error fields */ @@ -461,12 +470,12 @@ struct igb_adapter { #define IGB_FLAG_WOL_SUPPORTED (1 << 8) /* DMA Coalescing defines */ -#define IGB_MIN_TXPBSIZE 20408 -#define IGB_TX_BUF_4096 4096 -#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coal Flush */ +#define IGB_MIN_TXPBSIZE 20408 +#define IGB_TX_BUF_4096 4096 +#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coal Flush */ -#define IGB_82576_TSYNC_SHIFT 19 -#define IGB_TS_HDR_LEN 16 +#define IGB_82576_TSYNC_SHIFT 19 +#define IGB_TS_HDR_LEN 16 enum e1000_state_t { __IGB_TESTING, __IGB_RESETTING, diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index a3830a8ba4c1..48b594701efa 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -38,6 +38,7 @@ #include <linux/slab.h> #include <linux/pm_runtime.h> #include <linux/highmem.h> +#include <linux/mdio.h> #include "igb.h" @@ -178,44 +179,67 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ecmd->port = PORT_TP; ecmd->phy_address = hw->phy.addr; + ecmd->transceiver = XCVR_INTERNAL; } else { - ecmd->supported = (SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE | - SUPPORTED_Autoneg); + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_100baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause); + if (hw->mac.type == e1000_i354) + ecmd->supported |= SUPPORTED_2500baseX_Full; - ecmd->advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE | - ADVERTISED_Autoneg | - ADVERTISED_Pause); + ecmd->advertising = ADVERTISED_FIBRE; + + switch (adapter->link_speed) { + case SPEED_2500: + ecmd->advertising = ADVERTISED_2500baseX_Full; + break; + case SPEED_1000: + ecmd->advertising = ADVERTISED_1000baseT_Full; + break; + case SPEED_100: + ecmd->advertising = ADVERTISED_100baseT_Full; + break; + default: + break; + } + + if (hw->mac.autoneg == 1) + ecmd->advertising |= ADVERTISED_Autoneg; ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; } - ecmd->transceiver = XCVR_INTERNAL; - status = rd32(E1000_STATUS); if (status & E1000_STATUS_LU) { - - if ((status & E1000_STATUS_SPEED_1000) || - hw->phy.media_type != e1000_media_type_copper) - ethtool_cmd_speed_set(ecmd, SPEED_1000); + if ((hw->mac.type == e1000_i354) && + (status & E1000_STATUS_2P5_SKU) && + !(status & E1000_STATUS_2P5_SKU_OVER)) + ecmd->speed = SPEED_2500; + else if (status & E1000_STATUS_SPEED_1000) + ecmd->speed = SPEED_1000; else if (status & E1000_STATUS_SPEED_100) - ethtool_cmd_speed_set(ecmd, SPEED_100); + ecmd->speed = SPEED_100; else - ethtool_cmd_speed_set(ecmd, SPEED_10); - + ecmd->speed = SPEED_10; if ((status & E1000_STATUS_FD) || hw->phy.media_type != e1000_media_type_copper) ecmd->duplex = DUPLEX_FULL; else ecmd->duplex = DUPLEX_HALF; } else { - ethtool_cmd_speed_set(ecmd, -1); + ecmd->speed = -1; ecmd->duplex = -1; } - ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE; + if ((hw->phy.media_type == e1000_media_type_fiber) || + hw->mac.autoneg) + ecmd->autoneg = AUTONEG_ENABLE; + else + ecmd->autoneg = AUTONEG_DISABLE; /* MDI-X => 2; MDI =>1; Invalid =>0 */ if (hw->phy.media_type == e1000_media_type_copper) @@ -238,15 +262,15 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) struct e1000_hw *hw = &adapter->hw; /* When SoL/IDER sessions are active, autoneg/speed/duplex - * cannot be changed */ + * cannot be changed + */ if (igb_check_reset_block(hw)) { dev_err(&adapter->pdev->dev, "Cannot change link characteristics when SoL/IDER is active.\n"); return -EINVAL; } - /* - * MDI setting is only allowed when autoneg enabled because + /* MDI setting is only allowed when autoneg enabled because * some hardware doesn't allow MDI setting when speed or * duplex is forced. */ @@ -266,9 +290,31 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) if (ecmd->autoneg == AUTONEG_ENABLE) { hw->mac.autoneg = 1; - hw->phy.autoneg_advertised = ecmd->advertising | - ADVERTISED_TP | - ADVERTISED_Autoneg; + if (hw->phy.media_type == e1000_media_type_fiber) { + hw->phy.autoneg_advertised = ecmd->advertising | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg; + switch (adapter->link_speed) { + case SPEED_2500: + hw->phy.autoneg_advertised = + ADVERTISED_2500baseX_Full; + break; + case SPEED_1000: + hw->phy.autoneg_advertised = + ADVERTISED_1000baseT_Full; + break; + case SPEED_100: + hw->phy.autoneg_advertised = + ADVERTISED_100baseT_Full; + break; + default: + break; + } + } else { + hw->phy.autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; + } ecmd->advertising = hw->phy.autoneg_advertised; if (adapter->fc_autoneg) hw->fc.requested_mode = e1000_fc_default; @@ -283,8 +329,7 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) /* MDI-X => 2; MDI => 1; Auto => 3 */ if (ecmd->eth_tp_mdix_ctrl) { - /* - * fix up the value for auto (3 => 0) as zero is mapped + /* fix up the value for auto (3 => 0) as zero is mapped * internally to auto */ if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO) @@ -309,8 +354,7 @@ static u32 igb_get_link(struct net_device *netdev) struct igb_adapter *adapter = netdev_priv(netdev); struct e1000_mac_info *mac = &adapter->hw.mac; - /* - * If the link is not reported up to netdev, interrupts are disabled, + /* If the link is not reported up to netdev, interrupts are disabled, * and so the physical link state may have changed since we last * looked. Set get_link_status to make sure that the true link * state is interrogated, rather than pulling a cached and possibly @@ -430,7 +474,8 @@ static void igb_get_regs(struct net_device *netdev, /* Interrupt */ /* Reading EICS for EICR because they read the - * same but EICS does not clear on read */ + * same but EICS does not clear on read + */ regs_buff[13] = rd32(E1000_EICS); regs_buff[14] = rd32(E1000_EICS); regs_buff[15] = rd32(E1000_EIMS); @@ -438,7 +483,8 @@ static void igb_get_regs(struct net_device *netdev, regs_buff[17] = rd32(E1000_EIAC); regs_buff[18] = rd32(E1000_EIAM); /* Reading ICS for ICR because they read the - * same but ICS does not clear on read */ + * same but ICS does not clear on read + */ regs_buff[19] = rd32(E1000_ICS); regs_buff[20] = rd32(E1000_ICS); regs_buff[21] = rd32(E1000_IMS); @@ -688,12 +734,12 @@ static int igb_get_eeprom(struct net_device *netdev, if (hw->nvm.type == e1000_nvm_eeprom_spi) ret_val = hw->nvm.ops.read(hw, first_word, - last_word - first_word + 1, - eeprom_buff); + last_word - first_word + 1, + eeprom_buff); else { for (i = 0; i < last_word - first_word + 1; i++) { ret_val = hw->nvm.ops.read(hw, first_word + i, 1, - &eeprom_buff[i]); + &eeprom_buff[i]); if (ret_val) break; } @@ -740,15 +786,17 @@ static int igb_set_eeprom(struct net_device *netdev, ptr = (void *)eeprom_buff; if (eeprom->offset & 1) { - /* need read/modify/write of first changed EEPROM word */ - /* only the second byte of the word is being modified */ + /* need read/modify/write of first changed EEPROM word + * only the second byte of the word is being modified + */ ret_val = hw->nvm.ops.read(hw, first_word, 1, &eeprom_buff[0]); ptr++; } if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { - /* need read/modify/write of last changed EEPROM word */ - /* only the first byte of the word is being modified */ + /* need read/modify/write of last changed EEPROM word + * only the first byte of the word is being modified + */ ret_val = hw->nvm.ops.read(hw, last_word, 1, &eeprom_buff[last_word - first_word]); } @@ -763,10 +811,11 @@ static int igb_set_eeprom(struct net_device *netdev, eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]); ret_val = hw->nvm.ops.write(hw, first_word, - last_word - first_word + 1, eeprom_buff); + last_word - first_word + 1, eeprom_buff); /* Update the checksum over the first part of the EEPROM if needed - * and flush shadow RAM for 82573 controllers */ + * and flush shadow RAM for 82573 controllers + */ if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG))) hw->nvm.ops.update(hw); @@ -783,8 +832,7 @@ static void igb_get_drvinfo(struct net_device *netdev, strlcpy(drvinfo->driver, igb_driver_name, sizeof(drvinfo->driver)); strlcpy(drvinfo->version, igb_driver_version, sizeof(drvinfo->version)); - /* - * EEPROM image version # is reported as firmware version # for + /* EEPROM image version # is reported as firmware version # for * 82575 controllers */ strlcpy(drvinfo->fw_version, adapter->fw_version, @@ -847,9 +895,11 @@ static int igb_set_ringparam(struct net_device *netdev, } if (adapter->num_tx_queues > adapter->num_rx_queues) - temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring)); + temp_ring = vmalloc(adapter->num_tx_queues * + sizeof(struct igb_ring)); else - temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring)); + temp_ring = vmalloc(adapter->num_rx_queues * + sizeof(struct igb_ring)); if (!temp_ring) { err = -ENOMEM; @@ -858,10 +908,9 @@ static int igb_set_ringparam(struct net_device *netdev, igb_down(adapter); - /* - * We can't just free everything and then setup again, + /* We can't just free everything and then setup again, * because the ISRs in MSI-X mode get passed pointers - * to the tx and rx ring structs. + * to the Tx and Rx ring structs. */ if (new_tx_count != adapter->tx_ring_count) { for (i = 0; i < adapter->num_tx_queues; i++) { @@ -1199,6 +1248,7 @@ static int igb_reg_test(struct igb_adapter *adapter, u64 *data) switch (adapter->hw.mac.type) { case e1000_i350: + case e1000_i354: test = reg_test_i350; toggle = 0x7FEFF3FF; break; @@ -1361,6 +1411,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data) ics_mask = 0x77DCFED5; break; case e1000_i350: + case e1000_i354: case e1000_i210: case e1000_i211: ics_mask = 0x77DCFED5; @@ -1723,8 +1774,8 @@ static int igb_check_lbtest_frame(struct igb_rx_buffer *rx_buffer, } static int igb_clean_test_rings(struct igb_ring *rx_ring, - struct igb_ring *tx_ring, - unsigned int size) + struct igb_ring *tx_ring, + unsigned int size) { union e1000_adv_rx_desc *rx_desc; struct igb_rx_buffer *rx_buffer_info; @@ -1737,7 +1788,7 @@ static int igb_clean_test_rings(struct igb_ring *rx_ring, rx_desc = IGB_RX_DESC(rx_ring, rx_ntc); while (igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) { - /* check rx buffer */ + /* check Rx buffer */ rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc]; /* sync Rx buffer for CPU read */ @@ -1756,11 +1807,11 @@ static int igb_clean_test_rings(struct igb_ring *rx_ring, IGB_RX_BUFSZ, DMA_FROM_DEVICE); - /* unmap buffer on tx side */ + /* unmap buffer on Tx side */ tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc]; igb_unmap_and_free_tx_resource(tx_ring, tx_buffer_info); - /* increment rx/tx next to clean counters */ + /* increment Rx/Tx next to clean counters */ rx_ntc++; if (rx_ntc == rx_ring->count) rx_ntc = 0; @@ -1801,8 +1852,7 @@ static int igb_run_loopback_test(struct igb_adapter *adapter) igb_create_lbtest_frame(skb, size); skb_put(skb, size); - /* - * Calculate the loop count based on the largest descriptor ring + /* Calculate the loop count based on the largest descriptor ring * The idea is to wrap the largest ring a number of times using 64 * send/receive pairs during each loop */ @@ -1829,7 +1879,7 @@ static int igb_run_loopback_test(struct igb_adapter *adapter) break; } - /* allow 200 milliseconds for packets to go from tx to rx */ + /* allow 200 milliseconds for packets to go from Tx to Rx */ msleep(200); good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size); @@ -1848,13 +1898,21 @@ static int igb_run_loopback_test(struct igb_adapter *adapter) static int igb_loopback_test(struct igb_adapter *adapter, u64 *data) { /* PHY loopback cannot be performed if SoL/IDER - * sessions are active */ + * sessions are active + */ if (igb_check_reset_block(&adapter->hw)) { dev_err(&adapter->pdev->dev, "Cannot do PHY loopback test when SoL/IDER is active.\n"); *data = 0; goto out; } + + if (adapter->hw.mac.type == e1000_i354) { + dev_info(&adapter->pdev->dev, + "Loopback test not supported on i354.\n"); + *data = 0; + goto out; + } *data = igb_setup_desc_rings(adapter); if (*data) goto out; @@ -1879,7 +1937,8 @@ static int igb_link_test(struct igb_adapter *adapter, u64 *data) hw->mac.serdes_has_link = false; /* On some blade server designs, link establishment - * could take as long as 2-3 minutes */ + * could take as long as 2-3 minutes + */ do { hw->mac.ops.check_for_link(&adapter->hw); if (hw->mac.serdes_has_link) @@ -1922,7 +1981,8 @@ static void igb_diag_test(struct net_device *netdev, igb_power_up_link(adapter); /* Link test performed before hardware reset so autoneg doesn't - * interfere with test result */ + * interfere with test result + */ if (igb_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1987,8 +2047,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) struct igb_adapter *adapter = netdev_priv(netdev); wol->supported = WAKE_UCAST | WAKE_MCAST | - WAKE_BCAST | WAKE_MAGIC | - WAKE_PHY; + WAKE_BCAST | WAKE_MAGIC | + WAKE_PHY; wol->wolopts = 0; if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED)) @@ -2263,7 +2323,7 @@ static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data) sprintf(p, "rx_queue_%u_alloc_failed", i); p += ETH_GSTRING_LEN; } -/* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */ + /* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */ break; } } @@ -2283,6 +2343,7 @@ static int igb_get_ts_info(struct net_device *dev, case e1000_82576: case e1000_82580: case e1000_i350: + case e1000_i354: case e1000_i210: case e1000_i211: info->so_timestamping = @@ -2362,7 +2423,7 @@ static int igb_get_rss_hash_opts(struct igb_adapter *adapter, } static int igb_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, - u32 *rule_locs) + u32 *rule_locs) { struct igb_adapter *adapter = netdev_priv(dev); int ret = -EOPNOTSUPP; @@ -2506,7 +2567,8 @@ static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata) { struct igb_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 ipcnfg, eeer; + u32 ipcnfg, eeer, ret_val; + u16 phy_data; if ((hw->mac.type < e1000_i350) || (hw->phy.media_type != e1000_media_type_copper)) @@ -2525,6 +2587,32 @@ static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata) if (ipcnfg & E1000_IPCNFG_EEE_100M_AN) edata->advertised |= ADVERTISED_100baseT_Full; + /* EEE Link Partner Advertised */ + switch (hw->mac.type) { + case e1000_i350: + ret_val = igb_read_emi_reg(hw, E1000_EEE_LP_ADV_ADDR_I350, + &phy_data); + if (ret_val) + return -ENODATA; + + edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + break; + case e1000_i210: + case e1000_i211: + ret_val = igb_read_xmdio_reg(hw, E1000_EEE_LP_ADV_ADDR_I210, + E1000_EEE_LP_ADV_DEV_I210, + &phy_data); + if (ret_val) + return -ENODATA; + + edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + break; + default: + break; + } + if (eeer & E1000_EEER_EEE_NEG) edata->eee_active = true; @@ -2600,6 +2688,85 @@ static int igb_set_eee(struct net_device *netdev, return 0; } +static int igb_get_module_info(struct net_device *netdev, + struct ethtool_modinfo *modinfo) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 status = E1000_SUCCESS; + u16 sff8472_rev, addr_mode; + bool page_swap = false; + + if ((hw->phy.media_type == e1000_media_type_copper) || + (hw->phy.media_type == e1000_media_type_unknown)) + return -EOPNOTSUPP; + + /* Check whether we support SFF-8472 or not */ + status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_COMP, &sff8472_rev); + if (status != E1000_SUCCESS) + return -EIO; + + /* addressing mode is not supported */ + status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_SWAP, &addr_mode); + if (status != E1000_SUCCESS) + return -EIO; + + /* addressing mode is not supported */ + if ((addr_mode & 0xFF) & IGB_SFF_ADDRESSING_MODE) { + hw_dbg("Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n"); + page_swap = true; + } + + if ((sff8472_rev & 0xFF) == IGB_SFF_8472_UNSUP || page_swap) { + /* We have an SFP, but it does not support SFF-8472 */ + modinfo->type = ETH_MODULE_SFF_8079; + modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; + } else { + /* We have an SFP which supports a revision of SFF-8472 */ + modinfo->type = ETH_MODULE_SFF_8472; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; + } + + return 0; +} + +static int igb_get_module_eeprom(struct net_device *netdev, + struct ethtool_eeprom *ee, u8 *data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 status = E1000_SUCCESS; + u16 *dataword; + u16 first_word, last_word; + int i = 0; + + if (ee->len == 0) + return -EINVAL; + + first_word = ee->offset >> 1; + last_word = (ee->offset + ee->len - 1) >> 1; + + dataword = kmalloc(sizeof(u16) * (last_word - first_word + 1), + GFP_KERNEL); + if (!dataword) + return -ENOMEM; + + /* Read EEPROM block, SFF-8079/SFF-8472, word at a time */ + for (i = 0; i < last_word - first_word + 1; i++) { + status = igb_read_phy_reg_i2c(hw, first_word + i, &dataword[i]); + if (status != E1000_SUCCESS) + /* Error occurred while reading module */ + return -EIO; + + be16_to_cpus(&dataword[i]); + } + + memcpy(data, (u8 *)dataword + (ee->offset & 1), ee->len); + kfree(dataword); + + return 0; +} + static int igb_ethtool_begin(struct net_device *netdev) { struct igb_adapter *adapter = netdev_priv(netdev); @@ -2614,36 +2781,38 @@ static void igb_ethtool_complete(struct net_device *netdev) } static const struct ethtool_ops igb_ethtool_ops = { - .get_settings = igb_get_settings, - .set_settings = igb_set_settings, - .get_drvinfo = igb_get_drvinfo, - .get_regs_len = igb_get_regs_len, - .get_regs = igb_get_regs, - .get_wol = igb_get_wol, - .set_wol = igb_set_wol, - .get_msglevel = igb_get_msglevel, - .set_msglevel = igb_set_msglevel, - .nway_reset = igb_nway_reset, - .get_link = igb_get_link, - .get_eeprom_len = igb_get_eeprom_len, - .get_eeprom = igb_get_eeprom, - .set_eeprom = igb_set_eeprom, - .get_ringparam = igb_get_ringparam, - .set_ringparam = igb_set_ringparam, - .get_pauseparam = igb_get_pauseparam, - .set_pauseparam = igb_set_pauseparam, - .self_test = igb_diag_test, - .get_strings = igb_get_strings, - .set_phys_id = igb_set_phys_id, - .get_sset_count = igb_get_sset_count, - .get_ethtool_stats = igb_get_ethtool_stats, - .get_coalesce = igb_get_coalesce, - .set_coalesce = igb_set_coalesce, - .get_ts_info = igb_get_ts_info, + .get_settings = igb_get_settings, + .set_settings = igb_set_settings, + .get_drvinfo = igb_get_drvinfo, + .get_regs_len = igb_get_regs_len, + .get_regs = igb_get_regs, + .get_wol = igb_get_wol, + .set_wol = igb_set_wol, + .get_msglevel = igb_get_msglevel, + .set_msglevel = igb_set_msglevel, + .nway_reset = igb_nway_reset, + .get_link = igb_get_link, + .get_eeprom_len = igb_get_eeprom_len, + .get_eeprom = igb_get_eeprom, + .set_eeprom = igb_set_eeprom, + .get_ringparam = igb_get_ringparam, + .set_ringparam = igb_set_ringparam, + .get_pauseparam = igb_get_pauseparam, + .set_pauseparam = igb_set_pauseparam, + .self_test = igb_diag_test, + .get_strings = igb_get_strings, + .set_phys_id = igb_set_phys_id, + .get_sset_count = igb_get_sset_count, + .get_ethtool_stats = igb_get_ethtool_stats, + .get_coalesce = igb_get_coalesce, + .set_coalesce = igb_set_coalesce, + .get_ts_info = igb_get_ts_info, .get_rxnfc = igb_get_rxnfc, .set_rxnfc = igb_set_rxnfc, .get_eee = igb_get_eee, .set_eee = igb_set_eee, + .get_module_info = igb_get_module_info, + .get_module_eeprom = igb_get_module_eeprom, .begin = igb_ethtool_begin, .complete = igb_ethtool_complete, }; diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c index 0478a1abe541..58f1ce967aeb 100644 --- a/drivers/net/ethernet/intel/igb/igb_hwmon.c +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -45,21 +45,21 @@ static struct i2c_board_info i350_sensor_info = { /* hwmon callback functions */ static ssize_t igb_hwmon_show_location(struct device *dev, - struct device_attribute *attr, - char *buf) + struct device_attribute *attr, + char *buf) { struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, - dev_attr); + dev_attr); return sprintf(buf, "loc%u\n", igb_attr->sensor->location); } static ssize_t igb_hwmon_show_temp(struct device *dev, - struct device_attribute *attr, - char *buf) + struct device_attribute *attr, + char *buf) { struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, - dev_attr); + dev_attr); unsigned int value; /* reset the temp field */ @@ -74,11 +74,11 @@ static ssize_t igb_hwmon_show_temp(struct device *dev, } static ssize_t igb_hwmon_show_cautionthresh(struct device *dev, - struct device_attribute *attr, - char *buf) + struct device_attribute *attr, + char *buf) { struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, - dev_attr); + dev_attr); unsigned int value = igb_attr->sensor->caution_thresh; /* display millidegree */ @@ -88,11 +88,11 @@ static ssize_t igb_hwmon_show_cautionthresh(struct device *dev, } static ssize_t igb_hwmon_show_maxopthresh(struct device *dev, - struct device_attribute *attr, - char *buf) + struct device_attribute *attr, + char *buf) { struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, - dev_attr); + dev_attr); unsigned int value = igb_attr->sensor->max_op_thresh; /* display millidegree */ @@ -111,7 +111,8 @@ static ssize_t igb_hwmon_show_maxopthresh(struct device *dev, * the data structures we need to get the data to display. */ static int igb_add_hwmon_attr(struct igb_adapter *adapter, - unsigned int offset, int type) { + unsigned int offset, int type) +{ int rc; unsigned int n_attr; struct hwmon_attr *igb_attr; @@ -217,7 +218,7 @@ int igb_sysfs_init(struct igb_adapter *adapter) */ n_attrs = E1000_MAX_SENSORS * 4; igb_hwmon->hwmon_list = kcalloc(n_attrs, sizeof(struct hwmon_attr), - GFP_KERNEL); + GFP_KERNEL); if (!igb_hwmon->hwmon_list) { rc = -ENOMEM; goto err; diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 8496adfc6a68..38590252be64 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -77,6 +77,9 @@ static const struct e1000_info *igb_info_tbl[] = { }; static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = { + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_1GBPS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER), board_82575 }, @@ -169,6 +172,8 @@ static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac); static int igb_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos); static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate); +static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, + bool setting); static int igb_ndo_get_vf_config(struct net_device *netdev, int vf, struct ifla_vf_info *ivi); static void igb_check_vf_rate_limit(struct igb_adapter *); @@ -292,9 +297,7 @@ static const struct igb_reg_info igb_reg_info_tbl[] = { {} }; -/* - * igb_regdump - register printout routine - */ +/* igb_regdump - register printout routine */ static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo) { int n = 0; @@ -360,9 +363,7 @@ static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo) regs[2], regs[3]); } -/* - * igb_dump - Print registers, tx-rings and rx-rings - */ +/* igb_dump - Print registers, Tx-rings and Rx-rings */ static void igb_dump(struct igb_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -569,12 +570,13 @@ exit: return; } -/* igb_get_i2c_data - Reads the I2C SDA data bit +/** + * igb_get_i2c_data - Reads the I2C SDA data bit * @hw: pointer to hardware structure * @i2cctl: Current value of I2CCTL register * * Returns the I2C data bit value - */ + **/ static int igb_get_i2c_data(void *data) { struct igb_adapter *adapter = (struct igb_adapter *)data; @@ -584,12 +586,13 @@ static int igb_get_i2c_data(void *data) return ((i2cctl & E1000_I2C_DATA_IN) != 0); } -/* igb_set_i2c_data - Sets the I2C data bit +/** + * igb_set_i2c_data - Sets the I2C data bit * @data: pointer to hardware structure * @state: I2C data value (0 or 1) to set * * Sets the I2C data bit - */ + **/ static void igb_set_i2c_data(void *data, int state) { struct igb_adapter *adapter = (struct igb_adapter *)data; @@ -608,12 +611,13 @@ static void igb_set_i2c_data(void *data, int state) } -/* igb_set_i2c_clk - Sets the I2C SCL clock +/** + * igb_set_i2c_clk - Sets the I2C SCL clock * @data: pointer to hardware structure * @state: state to set clock * * Sets the I2C clock line to state - */ + **/ static void igb_set_i2c_clk(void *data, int state) { struct igb_adapter *adapter = (struct igb_adapter *)data; @@ -631,11 +635,12 @@ static void igb_set_i2c_clk(void *data, int state) wrfl(); } -/* igb_get_i2c_clk - Gets the I2C SCL clock state +/** + * igb_get_i2c_clk - Gets the I2C SCL clock state * @data: pointer to hardware structure * * Gets the I2C clock state - */ + **/ static int igb_get_i2c_clk(void *data) { struct igb_adapter *adapter = (struct igb_adapter *)data; @@ -655,8 +660,10 @@ static const struct i2c_algo_bit_data igb_i2c_algo = { }; /** - * igb_get_hw_dev - return device - * used by hardware layer to print debugging information + * igb_get_hw_dev - return device + * @hw: pointer to hardware structure + * + * used by hardware layer to print debugging information **/ struct net_device *igb_get_hw_dev(struct e1000_hw *hw) { @@ -665,10 +672,10 @@ struct net_device *igb_get_hw_dev(struct e1000_hw *hw) } /** - * igb_init_module - Driver Registration Routine + * igb_init_module - Driver Registration Routine * - * igb_init_module is the first routine called when the driver is - * loaded. All it does is register with the PCI subsystem. + * igb_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. **/ static int __init igb_init_module(void) { @@ -688,10 +695,10 @@ static int __init igb_init_module(void) module_init(igb_init_module); /** - * igb_exit_module - Driver Exit Cleanup Routine + * igb_exit_module - Driver Exit Cleanup Routine * - * igb_exit_module is called just before the driver is removed - * from memory. + * igb_exit_module is called just before the driver is removed + * from memory. **/ static void __exit igb_exit_module(void) { @@ -705,11 +712,11 @@ module_exit(igb_exit_module); #define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1)) /** - * igb_cache_ring_register - Descriptor ring to register mapping - * @adapter: board private structure to initialize + * igb_cache_ring_register - Descriptor ring to register mapping + * @adapter: board private structure to initialize * - * Once we know the feature-set enabled for the device, we'll cache - * the register offset the descriptor ring is assigned to. + * Once we know the feature-set enabled for the device, we'll cache + * the register offset the descriptor ring is assigned to. **/ static void igb_cache_ring_register(struct igb_adapter *adapter) { @@ -726,11 +733,12 @@ static void igb_cache_ring_register(struct igb_adapter *adapter) if (adapter->vfs_allocated_count) { for (; i < adapter->rss_queues; i++) adapter->rx_ring[i]->reg_idx = rbase_offset + - Q_IDX_82576(i); + Q_IDX_82576(i); } case e1000_82575: case e1000_82580: case e1000_i350: + case e1000_i354: case e1000_i210: case e1000_i211: default: @@ -785,9 +793,10 @@ static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector) switch (hw->mac.type) { case e1000_82575: /* The 82575 assigns vectors using a bitmask, which matches the - bitmask for the EICR/EIMS/EIMC registers. To assign one - or more queues to a vector, we write the appropriate bits - into the MSIXBM register for that vector. */ + * bitmask for the EICR/EIMS/EIMC registers. To assign one + * or more queues to a vector, we write the appropriate bits + * into the MSIXBM register for that vector. + */ if (rx_queue > IGB_N0_QUEUE) msixbm = E1000_EICR_RX_QUEUE0 << rx_queue; if (tx_queue > IGB_N0_QUEUE) @@ -798,8 +807,7 @@ static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector) q_vector->eims_value = msixbm; break; case e1000_82576: - /* - * 82576 uses a table that essentially consists of 2 columns + /* 82576 uses a table that essentially consists of 2 columns * with 8 rows. The ordering is column-major so we use the * lower 3 bits as the row index, and the 4th bit as the * column offset. @@ -816,10 +824,10 @@ static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector) break; case e1000_82580: case e1000_i350: + case e1000_i354: case e1000_i210: case e1000_i211: - /* - * On 82580 and newer adapters the scheme is similar to 82576 + /* On 82580 and newer adapters the scheme is similar to 82576 * however instead of ordering column-major we have things * ordered row-major. So we traverse the table by using * bit 0 as the column offset, and the remaining bits as the @@ -848,10 +856,11 @@ static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector) } /** - * igb_configure_msix - Configure MSI-X hardware + * igb_configure_msix - Configure MSI-X hardware + * @adapter: board private structure to initialize * - * igb_configure_msix sets up the hardware to properly - * generate MSI-X interrupts. + * igb_configure_msix sets up the hardware to properly + * generate MSI-X interrupts. **/ static void igb_configure_msix(struct igb_adapter *adapter) { @@ -875,8 +884,7 @@ static void igb_configure_msix(struct igb_adapter *adapter) wr32(E1000_CTRL_EXT, tmp); /* enable msix_other interrupt */ - array_wr32(E1000_MSIXBM(0), vector++, - E1000_EIMS_OTHER); + array_wr32(E1000_MSIXBM(0), vector++, E1000_EIMS_OTHER); adapter->eims_other = E1000_EIMS_OTHER; break; @@ -884,13 +892,15 @@ static void igb_configure_msix(struct igb_adapter *adapter) case e1000_82576: case e1000_82580: case e1000_i350: + case e1000_i354: case e1000_i210: case e1000_i211: /* Turn on MSI-X capability first, or our settings - * won't stick. And it will take days to debug. */ + * won't stick. And it will take days to debug. + */ wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE | - E1000_GPIE_PBA | E1000_GPIE_EIAME | - E1000_GPIE_NSICR); + E1000_GPIE_PBA | E1000_GPIE_EIAME | + E1000_GPIE_NSICR); /* enable msix_other interrupt */ adapter->eims_other = 1 << vector; @@ -912,10 +922,11 @@ static void igb_configure_msix(struct igb_adapter *adapter) } /** - * igb_request_msix - Initialize MSI-X interrupts + * igb_request_msix - Initialize MSI-X interrupts + * @adapter: board private structure to initialize * - * igb_request_msix allocates MSI-X vectors and requests interrupts from the - * kernel. + * igb_request_msix allocates MSI-X vectors and requests interrupts from the + * kernel. **/ static int igb_request_msix(struct igb_adapter *adapter) { @@ -924,7 +935,7 @@ static int igb_request_msix(struct igb_adapter *adapter) int i, err = 0, vector = 0, free_vector = 0; err = request_irq(adapter->msix_entries[vector].vector, - igb_msix_other, 0, netdev->name, adapter); + igb_msix_other, 0, netdev->name, adapter); if (err) goto err_out; @@ -948,8 +959,8 @@ static int igb_request_msix(struct igb_adapter *adapter) sprintf(q_vector->name, "%s-unused", netdev->name); err = request_irq(adapter->msix_entries[vector].vector, - igb_msix_ring, 0, q_vector->name, - q_vector); + igb_msix_ring, 0, q_vector->name, + q_vector); if (err) goto err_free; } @@ -982,13 +993,13 @@ static void igb_reset_interrupt_capability(struct igb_adapter *adapter) } /** - * igb_free_q_vector - Free memory allocated for specific interrupt vector - * @adapter: board private structure to initialize - * @v_idx: Index of vector to be freed + * igb_free_q_vector - Free memory allocated for specific interrupt vector + * @adapter: board private structure to initialize + * @v_idx: Index of vector to be freed * - * This function frees the memory allocated to the q_vector. In addition if - * NAPI is enabled it will delete any references to the NAPI struct prior - * to freeing the q_vector. + * This function frees the memory allocated to the q_vector. In addition if + * NAPI is enabled it will delete any references to the NAPI struct prior + * to freeing the q_vector. **/ static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx) { @@ -1003,20 +1014,19 @@ static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx) adapter->q_vector[v_idx] = NULL; netif_napi_del(&q_vector->napi); - /* - * ixgbe_get_stats64() might access the rings on this vector, + /* ixgbe_get_stats64() might access the rings on this vector, * we must wait a grace period before freeing it. */ kfree_rcu(q_vector, rcu); } /** - * igb_free_q_vectors - Free memory allocated for interrupt vectors - * @adapter: board private structure to initialize + * igb_free_q_vectors - Free memory allocated for interrupt vectors + * @adapter: board private structure to initialize * - * This function frees the memory allocated to the q_vectors. In addition if - * NAPI is enabled it will delete any references to the NAPI struct prior - * to freeing the q_vector. + * This function frees the memory allocated to the q_vectors. In addition if + * NAPI is enabled it will delete any references to the NAPI struct prior + * to freeing the q_vector. **/ static void igb_free_q_vectors(struct igb_adapter *adapter) { @@ -1031,10 +1041,11 @@ static void igb_free_q_vectors(struct igb_adapter *adapter) } /** - * igb_clear_interrupt_scheme - reset the device to a state of no interrupts + * igb_clear_interrupt_scheme - reset the device to a state of no interrupts + * @adapter: board private structure to initialize * - * This function resets the device so that it has 0 rx queues, tx queues, and - * MSI-X interrupts allocated. + * This function resets the device so that it has 0 Rx queues, Tx queues, and + * MSI-X interrupts allocated. */ static void igb_clear_interrupt_scheme(struct igb_adapter *adapter) { @@ -1043,10 +1054,12 @@ static void igb_clear_interrupt_scheme(struct igb_adapter *adapter) } /** - * igb_set_interrupt_capability - set MSI or MSI-X if supported + * igb_set_interrupt_capability - set MSI or MSI-X if supported + * @adapter: board private structure to initialize + * @msix: boolean value of MSIX capability * - * Attempt to configure interrupts using the best available - * capabilities of the hardware and kernel. + * Attempt to configure interrupts using the best available + * capabilities of the hardware and kernel. **/ static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix) { @@ -1063,10 +1076,10 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix) else adapter->num_tx_queues = adapter->rss_queues; - /* start with one vector for every rx queue */ + /* start with one vector for every Rx queue */ numvecs = adapter->num_rx_queues; - /* if tx handler is separate add 1 for every tx queue */ + /* if Tx handler is separate add 1 for every Tx queue */ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) numvecs += adapter->num_tx_queues; @@ -1128,16 +1141,16 @@ static void igb_add_ring(struct igb_ring *ring, } /** - * igb_alloc_q_vector - Allocate memory for a single interrupt vector - * @adapter: board private structure to initialize - * @v_count: q_vectors allocated on adapter, used for ring interleaving - * @v_idx: index of vector in adapter struct - * @txr_count: total number of Tx rings to allocate - * @txr_idx: index of first Tx ring to allocate - * @rxr_count: total number of Rx rings to allocate - * @rxr_idx: index of first Rx ring to allocate + * igb_alloc_q_vector - Allocate memory for a single interrupt vector + * @adapter: board private structure to initialize + * @v_count: q_vectors allocated on adapter, used for ring interleaving + * @v_idx: index of vector in adapter struct + * @txr_count: total number of Tx rings to allocate + * @txr_idx: index of first Tx ring to allocate + * @rxr_count: total number of Rx rings to allocate + * @rxr_idx: index of first Rx ring to allocate * - * We allocate one q_vector. If allocation fails we return -ENOMEM. + * We allocate one q_vector. If allocation fails we return -ENOMEM. **/ static int igb_alloc_q_vector(struct igb_adapter *adapter, int v_count, int v_idx, @@ -1179,6 +1192,17 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter, /* initialize pointer to rings */ ring = q_vector->ring; + /* intialize ITR */ + if (rxr_count) { + /* rx or rx/tx vector */ + if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3) + q_vector->itr_val = adapter->rx_itr_setting; + } else { + /* tx only vector */ + if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3) + q_vector->itr_val = adapter->tx_itr_setting; + } + if (txr_count) { /* assign generic ring traits */ ring->dev = &adapter->pdev->dev; @@ -1221,9 +1245,9 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter, set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags); /* - * On i350, i210, and i211, loopback VLAN packets + * On i350, i354, i210, and i211, loopback VLAN packets * have the tag byte-swapped. - * */ + */ if (adapter->hw.mac.type >= e1000_i350) set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags); @@ -1240,11 +1264,11 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter, /** - * igb_alloc_q_vectors - Allocate memory for interrupt vectors - * @adapter: board private structure to initialize + * igb_alloc_q_vectors - Allocate memory for interrupt vectors + * @adapter: board private structure to initialize * - * We allocate one q_vector per queue interrupt. If allocation fails we - * return -ENOMEM. + * We allocate one q_vector per queue interrupt. If allocation fails we + * return -ENOMEM. **/ static int igb_alloc_q_vectors(struct igb_adapter *adapter) { @@ -1298,9 +1322,11 @@ err_out: } /** - * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors + * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors + * @adapter: board private structure to initialize + * @msix: boolean value of MSIX capability * - * This function initializes the interrupts and allocates all of the queues. + * This function initializes the interrupts and allocates all of the queues. **/ static int igb_init_interrupt_scheme(struct igb_adapter *adapter, bool msix) { @@ -1325,10 +1351,11 @@ err_alloc_q_vectors: } /** - * igb_request_irq - initialize interrupts + * igb_request_irq - initialize interrupts + * @adapter: board private structure to initialize * - * Attempts to configure interrupts using the best available - * capabilities of the hardware and kernel. + * Attempts to configure interrupts using the best available + * capabilities of the hardware and kernel. **/ static int igb_request_irq(struct igb_adapter *adapter) { @@ -1394,15 +1421,14 @@ static void igb_free_irq(struct igb_adapter *adapter) } /** - * igb_irq_disable - Mask off interrupt generation on the NIC - * @adapter: board private structure + * igb_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure **/ static void igb_irq_disable(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - /* - * we need to be careful when disabling interrupts. The VFs are also + /* we need to be careful when disabling interrupts. The VFs are also * mapped into these registers and so clearing the bits can cause * issues on the VF drivers so we only need to clear what we set */ @@ -1427,8 +1453,8 @@ static void igb_irq_disable(struct igb_adapter *adapter) } /** - * igb_irq_enable - Enable default interrupt generation settings - * @adapter: board private structure + * igb_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure **/ static void igb_irq_enable(struct igb_adapter *adapter) { @@ -1477,13 +1503,12 @@ static void igb_update_mng_vlan(struct igb_adapter *adapter) } /** - * igb_release_hw_control - release control of the h/w to f/w - * @adapter: address of board private structure - * - * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that the - * driver is no longer loaded. + * igb_release_hw_control - release control of the h/w to f/w + * @adapter: address of board private structure * + * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that the + * driver is no longer loaded. **/ static void igb_release_hw_control(struct igb_adapter *adapter) { @@ -1497,13 +1522,12 @@ static void igb_release_hw_control(struct igb_adapter *adapter) } /** - * igb_get_hw_control - get control of the h/w from f/w - * @adapter: address of board private structure - * - * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that - * the driver is loaded. + * igb_get_hw_control - get control of the h/w from f/w + * @adapter: address of board private structure * + * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that + * the driver is loaded. **/ static void igb_get_hw_control(struct igb_adapter *adapter) { @@ -1517,8 +1541,8 @@ static void igb_get_hw_control(struct igb_adapter *adapter) } /** - * igb_configure - configure the hardware for RX and TX - * @adapter: private board structure + * igb_configure - configure the hardware for RX and TX + * @adapter: private board structure **/ static void igb_configure(struct igb_adapter *adapter) { @@ -1541,7 +1565,8 @@ static void igb_configure(struct igb_adapter *adapter) /* call igb_desc_unused which always leaves * at least 1 descriptor unused to make sure - * next_to_use != next_to_clean */ + * next_to_use != next_to_clean + */ for (i = 0; i < adapter->num_rx_queues; i++) { struct igb_ring *ring = adapter->rx_ring[i]; igb_alloc_rx_buffers(ring, igb_desc_unused(ring)); @@ -1549,8 +1574,8 @@ static void igb_configure(struct igb_adapter *adapter) } /** - * igb_power_up_link - Power up the phy/serdes link - * @adapter: address of board private structure + * igb_power_up_link - Power up the phy/serdes link + * @adapter: address of board private structure **/ void igb_power_up_link(struct igb_adapter *adapter) { @@ -1563,8 +1588,8 @@ void igb_power_up_link(struct igb_adapter *adapter) } /** - * igb_power_down_link - Power down the phy/serdes link - * @adapter: address of board private structure + * igb_power_down_link - Power down the phy/serdes link + * @adapter: address of board private structure */ static void igb_power_down_link(struct igb_adapter *adapter) { @@ -1575,8 +1600,8 @@ static void igb_power_down_link(struct igb_adapter *adapter) } /** - * igb_up - Open the interface and prepare it to handle traffic - * @adapter: board private structure + * igb_up - Open the interface and prepare it to handle traffic + * @adapter: board private structure **/ int igb_up(struct igb_adapter *adapter) { @@ -1624,7 +1649,8 @@ void igb_down(struct igb_adapter *adapter) int i; /* signal that we're down so the interrupt handler does not - * reschedule our watchdog timer */ + * reschedule our watchdog timer + */ set_bit(__IGB_DOWN, &adapter->state); /* disable receives in the hardware */ @@ -1694,6 +1720,7 @@ void igb_reset(struct igb_adapter *adapter) */ switch (mac->type) { case e1000_i350: + case e1000_i354: case e1000_82580: pba = rd32(E1000_RXPBS); pba = igb_rxpbs_adjust_82580(pba); @@ -1720,14 +1747,16 @@ void igb_reset(struct igb_adapter *adapter) * rounded up to the next 1KB and expressed in KB. Likewise, * the Rx FIFO should be large enough to accommodate at least * one full receive packet and is similarly rounded up and - * expressed in KB. */ + * expressed in KB. + */ pba = rd32(E1000_PBA); /* upper 16 bits has Tx packet buffer allocation size in KB */ tx_space = pba >> 16; /* lower 16 bits has Rx packet buffer allocation size in KB */ pba &= 0xffff; - /* the tx fifo also stores 16 bytes of information about the tx - * but don't include ethernet FCS because hardware appends it */ + /* the Tx fifo also stores 16 bytes of information about the Tx + * but don't include ethernet FCS because hardware appends it + */ min_tx_space = (adapter->max_frame_size + sizeof(union e1000_adv_tx_desc) - ETH_FCS_LEN) * 2; @@ -1740,13 +1769,15 @@ void igb_reset(struct igb_adapter *adapter) /* If current Tx allocation is less than the min Tx FIFO size, * and the min Tx FIFO size is less than the current Rx FIFO - * allocation, take space away from current Rx allocation */ + * allocation, take space away from current Rx allocation + */ if (tx_space < min_tx_space && ((min_tx_space - tx_space) < pba)) { pba = pba - (min_tx_space - tx_space); - /* if short on rx space, rx wins and must trump tx - * adjustment */ + /* if short on Rx space, Rx wins and must trump Tx + * adjustment + */ if (pba < min_rx_space) pba = min_rx_space; } @@ -1758,7 +1789,8 @@ void igb_reset(struct igb_adapter *adapter) * (or the size used for early receive) above it in the Rx FIFO. * Set it to the lower of: * - 90% of the Rx FIFO size, or - * - the full Rx FIFO size minus one full frame */ + * - the full Rx FIFO size minus one full frame + */ hwm = min(((pba << 10) * 9 / 10), ((pba << 10) - 2 * adapter->max_frame_size)); @@ -1789,8 +1821,7 @@ void igb_reset(struct igb_adapter *adapter) if (hw->mac.ops.init_hw(hw)) dev_err(&pdev->dev, "Hardware Error\n"); - /* - * Flow control settings reset on hardware reset, so guarantee flow + /* Flow control settings reset on hardware reset, so guarantee flow * control is off when forcing speed. */ if (!hw->mac.autoneg) @@ -1826,9 +1857,8 @@ void igb_reset(struct igb_adapter *adapter) static netdev_features_t igb_fix_features(struct net_device *netdev, netdev_features_t features) { - /* - * Since there is no support for separate rx/tx vlan accel - * enable/disable make sure tx flag is always in same state as rx. + /* Since there is no support for separate Rx/Tx vlan accel + * enable/disable make sure Tx flag is always in same state as Rx. */ if (features & NETIF_F_HW_VLAN_RX) features |= NETIF_F_HW_VLAN_TX; @@ -1876,6 +1906,7 @@ static const struct net_device_ops igb_netdev_ops = { .ndo_set_vf_mac = igb_ndo_set_vf_mac, .ndo_set_vf_vlan = igb_ndo_set_vf_vlan, .ndo_set_vf_tx_rate = igb_ndo_set_vf_bw, + .ndo_set_vf_spoofchk = igb_ndo_set_vf_spoofchk, .ndo_get_vf_config = igb_ndo_get_vf_config, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = igb_netpoll, @@ -1887,7 +1918,6 @@ static const struct net_device_ops igb_netdev_ops = { /** * igb_set_fw_version - Configure version string for ethtool * @adapter: adapter struct - * **/ void igb_set_fw_version(struct igb_adapter *adapter) { @@ -1923,10 +1953,10 @@ void igb_set_fw_version(struct igb_adapter *adapter) return; } -/* igb_init_i2c - Init I2C interface +/** + * igb_init_i2c - Init I2C interface * @adapter: pointer to adapter structure - * - */ + **/ static s32 igb_init_i2c(struct igb_adapter *adapter) { s32 status = E1000_SUCCESS; @@ -1951,15 +1981,15 @@ static s32 igb_init_i2c(struct igb_adapter *adapter) } /** - * igb_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in igb_pci_tbl + * igb_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in igb_pci_tbl * - * Returns 0 on success, negative on failure + * Returns 0 on success, negative on failure * - * igb_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. + * igb_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. **/ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -1996,18 +2026,19 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_coherent_mask(&pdev->dev, + DMA_BIT_MASK(32)); if (err) { - dev_err(&pdev->dev, "No usable DMA " - "configuration, aborting\n"); + dev_err(&pdev->dev, + "No usable DMA configuration, aborting\n"); goto err_dma; } } } err = pci_request_selected_regions(pdev, pci_select_bars(pdev, - IORESOURCE_MEM), - igb_driver_name); + IORESOURCE_MEM), + igb_driver_name); if (err) goto err_pci_reg; @@ -2085,8 +2116,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_info(&pdev->dev, "PHY reset is blocked due to SOL/IDER session.\n"); - /* - * features is initialized to 0 in allocation, it might have bits + /* features is initialized to 0 in allocation, it might have bits * set by igb_sw_init so we should use an or instead of an * assignment. */ @@ -2130,11 +2160,11 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->en_mng_pt = igb_enable_mng_pass_thru(hw); /* before reading the NVM, reset the controller to put the device in a - * known good starting state */ + * known good starting state + */ hw->mac.ops.reset_hw(hw); - /* - * make sure the NVM is good , i211 parts have special NVM that + /* make sure the NVM is good , i211 parts have special NVM that * doesn't contain a checksum */ if (hw->mac.type != e1000_i211) { @@ -2161,9 +2191,9 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) igb_set_fw_version(adapter); setup_timer(&adapter->watchdog_timer, igb_watchdog, - (unsigned long) adapter); + (unsigned long) adapter); setup_timer(&adapter->phy_info_timer, igb_update_phy_info, - (unsigned long) adapter); + (unsigned long) adapter); INIT_WORK(&adapter->reset_task, igb_reset_task); INIT_WORK(&adapter->watchdog_task, igb_watchdog_task); @@ -2185,8 +2215,8 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* Check the NVM for wake support on non-port A ports */ if (hw->mac.type >= e1000_82580) hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + - NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, - &eeprom_data); + NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, + &eeprom_data); else if (hw->bus.func == 1) hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); @@ -2195,7 +2225,8 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* now that we have the eeprom settings, apply the special cases where * the eeprom may be wrong or the board simply won't support wake on - * lan on a particular port */ + * lan on a particular port + */ switch (pdev->device) { case E1000_DEV_ID_82575GB_QUAD_COPPER: adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; @@ -2204,7 +2235,8 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case E1000_DEV_ID_82576_FIBER: case E1000_DEV_ID_82576_SERDES: /* Wake events only supported on port A for dual fiber - * regardless of eeprom setting */ + * regardless of eeprom setting + */ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; break; @@ -2274,8 +2306,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (hw->mac.type == e1000_i350 && hw->bus.func == 0) { u16 ets_word; - /* - * Read the NVM to determine if this i350 device supports an + /* Read the NVM to determine if this i350 device supports an * external thermal sensor. */ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word); @@ -2294,17 +2325,20 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) igb_ptp_init(adapter); dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n"); - /* print bus type/speed/width info */ - dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n", - netdev->name, - ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" : - (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" : - "unknown"), - ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : - (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" : - (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" : - "unknown"), - netdev->dev_addr); + /* print bus type/speed/width info, not applicable to i354 */ + if (hw->mac.type != e1000_i354) { + dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n", + netdev->name, + ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" : + (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" : + "unknown"), + ((hw->bus.width == e1000_bus_width_pcie_x4) ? + "Width x4" : + (hw->bus.width == e1000_bus_width_pcie_x2) ? + "Width x2" : + (hw->bus.width == e1000_bus_width_pcie_x1) ? + "Width x1" : "unknown"), netdev->dev_addr); + } ret_val = igb_read_part_string(hw, part_str, E1000_PBANUM_LENGTH); if (ret_val) @@ -2321,6 +2355,13 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case e1000_i211: igb_set_eee_i350(hw); break; + case e1000_i354: + if (hw->phy.media_type == e1000_media_type_copper) { + if ((rd32(E1000_CTRL_EXT) & + E1000_CTRL_EXT_LINK_MODE_SGMII)) + igb_set_eee_i354(hw); + } + break; default: break; } @@ -2344,7 +2385,7 @@ err_ioremap: free_netdev(netdev); err_alloc_etherdev: pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_select_bars(pdev, IORESOURCE_MEM)); err_pci_reg: err_dma: pci_disable_device(pdev); @@ -2444,26 +2485,24 @@ out: } #endif -/* +/** * igb_remove_i2c - Cleanup I2C interface * @adapter: pointer to adapter structure - * - */ + **/ static void igb_remove_i2c(struct igb_adapter *adapter) { - /* free the adapter bus structure */ i2c_del_adapter(&adapter->i2c_adap); } /** - * igb_remove - Device Removal Routine - * @pdev: PCI device information struct + * igb_remove - Device Removal Routine + * @pdev: PCI device information struct * - * igb_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. The could be caused by a - * Hot-Plug event, or because the driver is going to be removed from - * memory. + * igb_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. **/ static void igb_remove(struct pci_dev *pdev) { @@ -2477,8 +2516,7 @@ static void igb_remove(struct pci_dev *pdev) #endif igb_remove_i2c(adapter); igb_ptp_stop(adapter); - /* - * The watchdog timer may be rescheduled, so explicitly + /* The watchdog timer may be rescheduled, so explicitly * disable watchdog from being rescheduled. */ set_bit(__IGB_DOWN, &adapter->state); @@ -2498,7 +2536,8 @@ static void igb_remove(struct pci_dev *pdev) #endif /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ + * would have already happened in close and is redundant. + */ igb_release_hw_control(adapter); unregister_netdev(netdev); @@ -2513,7 +2552,7 @@ static void igb_remove(struct pci_dev *pdev) if (hw->flash_address) iounmap(hw->flash_address); pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_select_bars(pdev, IORESOURCE_MEM)); kfree(adapter->shadow_vfta); free_netdev(netdev); @@ -2524,13 +2563,13 @@ static void igb_remove(struct pci_dev *pdev) } /** - * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space - * @adapter: board private structure to initialize + * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space + * @adapter: board private structure to initialize * - * This function initializes the vf specific data storage and then attempts to - * allocate the VFs. The reason for ordering it this way is because it is much - * mor expensive time wise to disable SR-IOV than it is to allocate and free - * the memory for the VFs. + * This function initializes the vf specific data storage and then attempts to + * allocate the VFs. The reason for ordering it this way is because it is much + * mor expensive time wise to disable SR-IOV than it is to allocate and free + * the memory for the VFs. **/ static void igb_probe_vfs(struct igb_adapter *adapter) { @@ -2576,6 +2615,7 @@ static void igb_init_queue_configuration(struct igb_adapter *adapter) } /* fall through */ case e1000_82580: + case e1000_i354: default: max_rss_queues = IGB_MAX_RX_QUEUES; break; @@ -2590,8 +2630,7 @@ static void igb_init_queue_configuration(struct igb_adapter *adapter) /* Device supports enough interrupts without queue pairing. */ break; case e1000_82576: - /* - * If VFs are going to be allocated with RSS queues then we + /* If VFs are going to be allocated with RSS queues then we * should pair the queues in order to conserve interrupts due * to limited supply. */ @@ -2601,10 +2640,10 @@ static void igb_init_queue_configuration(struct igb_adapter *adapter) /* fall through */ case e1000_82580: case e1000_i350: + case e1000_i354: case e1000_i210: default: - /* - * If rss_queues > half of max_rss_queues, pair the queues in + /* If rss_queues > half of max_rss_queues, pair the queues in * order to conserve interrupts due to limited supply. */ if (adapter->rss_queues > (max_rss_queues / 2)) @@ -2614,12 +2653,12 @@ static void igb_init_queue_configuration(struct igb_adapter *adapter) } /** - * igb_sw_init - Initialize general software structures (struct igb_adapter) - * @adapter: board private structure to initialize + * igb_sw_init - Initialize general software structures (struct igb_adapter) + * @adapter: board private structure to initialize * - * igb_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). + * igb_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). **/ static int igb_sw_init(struct igb_adapter *adapter) { @@ -2689,16 +2728,16 @@ static int igb_sw_init(struct igb_adapter *adapter) } /** - * igb_open - Called when a network interface is made active - * @netdev: network interface device structure + * igb_open - Called when a network interface is made active + * @netdev: network interface device structure * - * Returns 0 on success, negative value on failure + * Returns 0 on success, negative value on failure * - * The open entry point is called when a network interface is made - * active by the system (IFF_UP). At this point all resources needed - * for transmit and receive operations are allocated, the interrupt - * handler is registered with the OS, the watchdog timer is started, - * and the stack is notified that the interface is ready. + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. **/ static int __igb_open(struct net_device *netdev, bool resuming) { @@ -2734,7 +2773,8 @@ static int __igb_open(struct net_device *netdev, bool resuming) /* before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt * as soon as we call pci_request_irq, so we have to setup our - * clean_rx handler before we do so. */ + * clean_rx handler before we do so. + */ igb_configure(adapter); err = igb_request_irq(adapter); @@ -2803,15 +2843,15 @@ static int igb_open(struct net_device *netdev) } /** - * igb_close - Disables a network interface - * @netdev: network interface device structure + * igb_close - Disables a network interface + * @netdev: network interface device structure * - * Returns 0, this is not allowed to fail + * Returns 0, this is not allowed to fail * - * The close entry point is called when an interface is de-activated - * by the OS. The hardware is still under the driver's control, but - * needs to be disabled. A global MAC reset is issued to stop the - * hardware, and all transmit and receive resources are freed. + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the driver's control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. **/ static int __igb_close(struct net_device *netdev, bool suspending) { @@ -2840,10 +2880,10 @@ static int igb_close(struct net_device *netdev) } /** - * igb_setup_tx_resources - allocate Tx resources (Descriptors) - * @tx_ring: tx descriptor ring (for a specific queue) to setup + * igb_setup_tx_resources - allocate Tx resources (Descriptors) + * @tx_ring: tx descriptor ring (for a specific queue) to setup * - * Return 0 on success, negative on failure + * Return 0 on success, negative on failure **/ int igb_setup_tx_resources(struct igb_ring *tx_ring) { @@ -2878,11 +2918,11 @@ err: } /** - * igb_setup_all_tx_resources - wrapper to allocate Tx resources - * (Descriptors) for all queues - * @adapter: board private structure + * igb_setup_all_tx_resources - wrapper to allocate Tx resources + * (Descriptors) for all queues + * @adapter: board private structure * - * Return 0 on success, negative on failure + * Return 0 on success, negative on failure **/ static int igb_setup_all_tx_resources(struct igb_adapter *adapter) { @@ -2904,8 +2944,8 @@ static int igb_setup_all_tx_resources(struct igb_adapter *adapter) } /** - * igb_setup_tctl - configure the transmit control registers - * @adapter: Board private structure + * igb_setup_tctl - configure the transmit control registers + * @adapter: Board private structure **/ void igb_setup_tctl(struct igb_adapter *adapter) { @@ -2930,11 +2970,11 @@ void igb_setup_tctl(struct igb_adapter *adapter) } /** - * igb_configure_tx_ring - Configure transmit ring after Reset - * @adapter: board private structure - * @ring: tx ring to configure + * igb_configure_tx_ring - Configure transmit ring after Reset + * @adapter: board private structure + * @ring: tx ring to configure * - * Configure a transmit ring after a reset. + * Configure a transmit ring after a reset. **/ void igb_configure_tx_ring(struct igb_adapter *adapter, struct igb_ring *ring) @@ -2950,9 +2990,9 @@ void igb_configure_tx_ring(struct igb_adapter *adapter, mdelay(10); wr32(E1000_TDLEN(reg_idx), - ring->count * sizeof(union e1000_adv_tx_desc)); + ring->count * sizeof(union e1000_adv_tx_desc)); wr32(E1000_TDBAL(reg_idx), - tdba & 0x00000000ffffffffULL); + tdba & 0x00000000ffffffffULL); wr32(E1000_TDBAH(reg_idx), tdba >> 32); ring->tail = hw->hw_addr + E1000_TDT(reg_idx); @@ -2968,10 +3008,10 @@ void igb_configure_tx_ring(struct igb_adapter *adapter, } /** - * igb_configure_tx - Configure transmit Unit after Reset - * @adapter: board private structure + * igb_configure_tx - Configure transmit Unit after Reset + * @adapter: board private structure * - * Configure the Tx unit of the MAC after a reset. + * Configure the Tx unit of the MAC after a reset. **/ static void igb_configure_tx(struct igb_adapter *adapter) { @@ -2982,10 +3022,10 @@ static void igb_configure_tx(struct igb_adapter *adapter) } /** - * igb_setup_rx_resources - allocate Rx resources (Descriptors) - * @rx_ring: rx descriptor ring (for a specific queue) to setup + * igb_setup_rx_resources - allocate Rx resources (Descriptors) + * @rx_ring: Rx descriptor ring (for a specific queue) to setup * - * Returns 0 on success, negative on failure + * Returns 0 on success, negative on failure **/ int igb_setup_rx_resources(struct igb_ring *rx_ring) { @@ -3021,11 +3061,11 @@ err: } /** - * igb_setup_all_rx_resources - wrapper to allocate Rx resources - * (Descriptors) for all queues - * @adapter: board private structure + * igb_setup_all_rx_resources - wrapper to allocate Rx resources + * (Descriptors) for all queues + * @adapter: board private structure * - * Return 0 on success, negative on failure + * Return 0 on success, negative on failure **/ static int igb_setup_all_rx_resources(struct igb_adapter *adapter) { @@ -3047,8 +3087,8 @@ static int igb_setup_all_rx_resources(struct igb_adapter *adapter) } /** - * igb_setup_mrqc - configure the multiple receive queue control registers - * @adapter: Board private structure + * igb_setup_mrqc - configure the multiple receive queue control registers + * @adapter: Board private structure **/ static void igb_setup_mrqc(struct igb_adapter *adapter) { @@ -3081,8 +3121,7 @@ static void igb_setup_mrqc(struct igb_adapter *adapter) break; } - /* - * Populate the indirection table 4 entries at a time. To do this + /* Populate the indirection table 4 entries at a time. To do this * we are generating the results for n and n+2 and then interleaving * those with the results with n+1 and n+3. */ @@ -3098,8 +3137,7 @@ static void igb_setup_mrqc(struct igb_adapter *adapter) wr32(E1000_RETA(j), reta); } - /* - * Disable raw packet checksumming so that RSS hash is placed in + /* Disable raw packet checksumming so that RSS hash is placed in * descriptor on writeback. No need to enable TCP/UDP/IP checksum * offloads as they are enabled by default */ @@ -3129,7 +3167,8 @@ static void igb_setup_mrqc(struct igb_adapter *adapter) /* If VMDq is enabled then we set the appropriate mode for that, else * we default to RSS so that an RSS hash is calculated per packet even - * if we are only using one queue */ + * if we are only using one queue + */ if (adapter->vfs_allocated_count) { if (hw->mac.type > e1000_82575) { /* Set the default pool for the PF's first queue */ @@ -3154,8 +3193,8 @@ static void igb_setup_mrqc(struct igb_adapter *adapter) } /** - * igb_setup_rctl - configure the receive control registers - * @adapter: Board private structure + * igb_setup_rctl - configure the receive control registers + * @adapter: Board private structure **/ void igb_setup_rctl(struct igb_adapter *adapter) { @@ -3170,8 +3209,7 @@ void igb_setup_rctl(struct igb_adapter *adapter) rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF | (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT); - /* - * enable stripping of CRC. It's unlikely this will break BMC + /* enable stripping of CRC. It's unlikely this will break BMC * redirection as it did with e1000. Newer features require * that the HW strips the CRC. */ @@ -3198,7 +3236,8 @@ void igb_setup_rctl(struct igb_adapter *adapter) /* This is useful for sniffing bad packets. */ if (adapter->netdev->features & NETIF_F_RXALL) { /* UPE and MPE will be handled by normal PROMISC logic - * in e1000e_set_rx_mode */ + * in e1000e_set_rx_mode + */ rctl |= (E1000_RCTL_SBP | /* Receive bad packets */ E1000_RCTL_BAM | /* RX All Bcast Pkts */ E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */ @@ -3221,7 +3260,8 @@ static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size, u32 vmolr; /* if it isn't the PF check to see if VFs are enabled and - * increase the size to support vlan tags */ + * increase the size to support vlan tags + */ if (vfn < adapter->vfs_allocated_count && adapter->vf_data[vfn].vlans_enabled) size += VLAN_TAG_SIZE; @@ -3235,10 +3275,10 @@ static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size, } /** - * igb_rlpml_set - set maximum receive packet size - * @adapter: board private structure + * igb_rlpml_set - set maximum receive packet size + * @adapter: board private structure * - * Configure maximum receivable packet size. + * Configure maximum receivable packet size. **/ static void igb_rlpml_set(struct igb_adapter *adapter) { @@ -3248,8 +3288,7 @@ static void igb_rlpml_set(struct igb_adapter *adapter) if (pf_id) { igb_set_vf_rlpml(adapter, max_frame_size, pf_id); - /* - * If we're in VMDQ or SR-IOV mode, then set global RLPML + /* If we're in VMDQ or SR-IOV mode, then set global RLPML * to our max jumbo frame size, in case we need to enable * jumbo frames on one of the rings later. * This will not pass over-length frames into the default @@ -3267,17 +3306,16 @@ static inline void igb_set_vmolr(struct igb_adapter *adapter, struct e1000_hw *hw = &adapter->hw; u32 vmolr; - /* - * This register exists only on 82576 and newer so if we are older then + /* This register exists only on 82576 and newer so if we are older then * we should exit and do nothing */ if (hw->mac.type < e1000_82576) return; vmolr = rd32(E1000_VMOLR(vfn)); - vmolr |= E1000_VMOLR_STRVLAN; /* Strip vlan tags */ + vmolr |= E1000_VMOLR_STRVLAN; /* Strip vlan tags */ if (aupe) - vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */ + vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */ else vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */ @@ -3286,25 +3324,24 @@ static inline void igb_set_vmolr(struct igb_adapter *adapter, if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count) vmolr |= E1000_VMOLR_RSSE; /* enable RSS */ - /* - * for VMDq only allow the VFs and pool 0 to accept broadcast and + /* for VMDq only allow the VFs and pool 0 to accept broadcast and * multicast packets */ if (vfn <= adapter->vfs_allocated_count) - vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */ + vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */ wr32(E1000_VMOLR(vfn), vmolr); } /** - * igb_configure_rx_ring - Configure a receive ring after Reset - * @adapter: board private structure - * @ring: receive ring to be configured + * igb_configure_rx_ring - Configure a receive ring after Reset + * @adapter: board private structure + * @ring: receive ring to be configured * - * Configure the Rx unit of the MAC after a reset. + * Configure the Rx unit of the MAC after a reset. **/ void igb_configure_rx_ring(struct igb_adapter *adapter, - struct igb_ring *ring) + struct igb_ring *ring) { struct e1000_hw *hw = &adapter->hw; u64 rdba = ring->dma; @@ -3319,7 +3356,7 @@ void igb_configure_rx_ring(struct igb_adapter *adapter, rdba & 0x00000000ffffffffULL); wr32(E1000_RDBAH(reg_idx), rdba >> 32); wr32(E1000_RDLEN(reg_idx), - ring->count * sizeof(union e1000_adv_rx_desc)); + ring->count * sizeof(union e1000_adv_rx_desc)); /* initialize head and tail */ ring->tail = hw->hw_addr + E1000_RDT(reg_idx); @@ -3365,10 +3402,10 @@ static void igb_set_rx_buffer_len(struct igb_adapter *adapter, } /** - * igb_configure_rx - Configure receive Unit after Reset - * @adapter: board private structure + * igb_configure_rx - Configure receive Unit after Reset + * @adapter: board private structure * - * Configure the Rx unit of the MAC after a reset. + * Configure the Rx unit of the MAC after a reset. **/ static void igb_configure_rx(struct igb_adapter *adapter) { @@ -3379,10 +3416,11 @@ static void igb_configure_rx(struct igb_adapter *adapter) /* set the correct pool for the PF default MAC address in entry 0 */ igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0, - adapter->vfs_allocated_count); + adapter->vfs_allocated_count); /* Setup the HW Rx Head and Tail Descriptor Pointers and - * the Base and Length of the Rx Descriptor Ring */ + * the Base and Length of the Rx Descriptor Ring + */ for (i = 0; i < adapter->num_rx_queues; i++) { struct igb_ring *rx_ring = adapter->rx_ring[i]; igb_set_rx_buffer_len(adapter, rx_ring); @@ -3391,10 +3429,10 @@ static void igb_configure_rx(struct igb_adapter *adapter) } /** - * igb_free_tx_resources - Free Tx Resources per Queue - * @tx_ring: Tx descriptor ring for a specific queue + * igb_free_tx_resources - Free Tx Resources per Queue + * @tx_ring: Tx descriptor ring for a specific queue * - * Free all transmit software resources + * Free all transmit software resources **/ void igb_free_tx_resources(struct igb_ring *tx_ring) { @@ -3414,10 +3452,10 @@ void igb_free_tx_resources(struct igb_ring *tx_ring) } /** - * igb_free_all_tx_resources - Free Tx Resources for All Queues - * @adapter: board private structure + * igb_free_all_tx_resources - Free Tx Resources for All Queues + * @adapter: board private structure * - * Free all transmit software resources + * Free all transmit software resources **/ static void igb_free_all_tx_resources(struct igb_adapter *adapter) { @@ -3450,8 +3488,8 @@ void igb_unmap_and_free_tx_resource(struct igb_ring *ring, } /** - * igb_clean_tx_ring - Free Tx Buffers - * @tx_ring: ring to be cleaned + * igb_clean_tx_ring - Free Tx Buffers + * @tx_ring: ring to be cleaned **/ static void igb_clean_tx_ring(struct igb_ring *tx_ring) { @@ -3481,8 +3519,8 @@ static void igb_clean_tx_ring(struct igb_ring *tx_ring) } /** - * igb_clean_all_tx_rings - Free Tx Buffers for all queues - * @adapter: board private structure + * igb_clean_all_tx_rings - Free Tx Buffers for all queues + * @adapter: board private structure **/ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) { @@ -3493,10 +3531,10 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) } /** - * igb_free_rx_resources - Free Rx Resources - * @rx_ring: ring to clean the resources from + * igb_free_rx_resources - Free Rx Resources + * @rx_ring: ring to clean the resources from * - * Free all receive software resources + * Free all receive software resources **/ void igb_free_rx_resources(struct igb_ring *rx_ring) { @@ -3516,10 +3554,10 @@ void igb_free_rx_resources(struct igb_ring *rx_ring) } /** - * igb_free_all_rx_resources - Free Rx Resources for All Queues - * @adapter: board private structure + * igb_free_all_rx_resources - Free Rx Resources for All Queues + * @adapter: board private structure * - * Free all receive software resources + * Free all receive software resources **/ static void igb_free_all_rx_resources(struct igb_adapter *adapter) { @@ -3530,8 +3568,8 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter) } /** - * igb_clean_rx_ring - Free Rx Buffers per Queue - * @rx_ring: ring to free buffers from + * igb_clean_rx_ring - Free Rx Buffers per Queue + * @rx_ring: ring to free buffers from **/ static void igb_clean_rx_ring(struct igb_ring *rx_ring) { @@ -3573,8 +3611,8 @@ static void igb_clean_rx_ring(struct igb_ring *rx_ring) } /** - * igb_clean_all_rx_rings - Free Rx Buffers for all queues - * @adapter: board private structure + * igb_clean_all_rx_rings - Free Rx Buffers for all queues + * @adapter: board private structure **/ static void igb_clean_all_rx_rings(struct igb_adapter *adapter) { @@ -3585,11 +3623,11 @@ static void igb_clean_all_rx_rings(struct igb_adapter *adapter) } /** - * igb_set_mac - Change the Ethernet Address of the NIC - * @netdev: network interface device structure - * @p: pointer to an address structure + * igb_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure * - * Returns 0 on success, negative on failure + * Returns 0 on success, negative on failure **/ static int igb_set_mac(struct net_device *netdev, void *p) { @@ -3605,19 +3643,19 @@ static int igb_set_mac(struct net_device *netdev, void *p) /* set the correct pool for the new PF MAC address in entry 0 */ igb_rar_set_qsel(adapter, hw->mac.addr, 0, - adapter->vfs_allocated_count); + adapter->vfs_allocated_count); return 0; } /** - * igb_write_mc_addr_list - write multicast addresses to MTA - * @netdev: network interface device structure + * igb_write_mc_addr_list - write multicast addresses to MTA + * @netdev: network interface device structure * - * Writes multicast address list to the MTA hash table. - * Returns: -ENOMEM on failure - * 0 on no addresses written - * X on writing X addresses to MTA + * Writes multicast address list to the MTA hash table. + * Returns: -ENOMEM on failure + * 0 on no addresses written + * X on writing X addresses to MTA **/ static int igb_write_mc_addr_list(struct net_device *netdev) { @@ -3650,13 +3688,13 @@ static int igb_write_mc_addr_list(struct net_device *netdev) } /** - * igb_write_uc_addr_list - write unicast addresses to RAR table - * @netdev: network interface device structure + * igb_write_uc_addr_list - write unicast addresses to RAR table + * @netdev: network interface device structure * - * Writes unicast address list to the RAR table. - * Returns: -ENOMEM on failure/insufficient address space - * 0 on no addresses written - * X on writing X addresses to the RAR table + * Writes unicast address list to the RAR table. + * Returns: -ENOMEM on failure/insufficient address space + * 0 on no addresses written + * X on writing X addresses to the RAR table **/ static int igb_write_uc_addr_list(struct net_device *netdev) { @@ -3677,8 +3715,8 @@ static int igb_write_uc_addr_list(struct net_device *netdev) if (!rar_entries) break; igb_rar_set_qsel(adapter, ha->addr, - rar_entries--, - vfn); + rar_entries--, + vfn); count++; } } @@ -3693,13 +3731,13 @@ static int igb_write_uc_addr_list(struct net_device *netdev) } /** - * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set - * @netdev: network interface device structure + * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set + * @netdev: network interface device structure * - * The set_rx_mode entry point is called whenever the unicast or multicast - * address lists or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper unicast, multicast, - * promiscuous mode, and all-multi behavior. + * The set_rx_mode entry point is called whenever the unicast or multicast + * address lists or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper unicast, multicast, + * promiscuous mode, and all-multi behavior. **/ static void igb_set_rx_mode(struct net_device *netdev) { @@ -3723,8 +3761,7 @@ static void igb_set_rx_mode(struct net_device *netdev) rctl |= E1000_RCTL_MPE; vmolr |= E1000_VMOLR_MPME; } else { - /* - * Write addresses to the MTA, if the attempt fails + /* Write addresses to the MTA, if the attempt fails * then we should just turn on promiscuous mode so * that we can at least receive multicast traffic */ @@ -3736,8 +3773,7 @@ static void igb_set_rx_mode(struct net_device *netdev) vmolr |= E1000_VMOLR_ROMPE; } } - /* - * Write addresses to available RAR registers, if there is not + /* Write addresses to available RAR registers, if there is not * sufficient space to store all the addresses then enable * unicast promiscuous mode */ @@ -3750,8 +3786,7 @@ static void igb_set_rx_mode(struct net_device *netdev) } wr32(E1000_RCTL, rctl); - /* - * In order to support SR-IOV and eventually VMDq it is necessary to set + /* In order to support SR-IOV and eventually VMDq it is necessary to set * the VMOLR to enable the appropriate modes. Without this workaround * we will have issues with VLAN tag stripping not being done for frames * that are only arriving because we are the default pool @@ -3760,7 +3795,7 @@ static void igb_set_rx_mode(struct net_device *netdev) return; vmolr |= rd32(E1000_VMOLR(vfn)) & - ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE); + ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE); wr32(E1000_VMOLR(vfn), vmolr); igb_restore_vf_multicasts(adapter); } @@ -3805,7 +3840,8 @@ static void igb_spoof_check(struct igb_adapter *adapter) } /* Need to wait a few seconds after link up to get diagnostic information from - * the phy */ + * the phy + */ static void igb_update_phy_info(unsigned long data) { struct igb_adapter *adapter = (struct igb_adapter *) data; @@ -3813,8 +3849,8 @@ static void igb_update_phy_info(unsigned long data) } /** - * igb_has_link - check shared code for link and determine up/down - * @adapter: pointer to driver private info + * igb_has_link - check shared code for link and determine up/down + * @adapter: pointer to driver private info **/ bool igb_has_link(struct igb_adapter *adapter) { @@ -3859,17 +3895,16 @@ static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event) ctrl_ext = rd32(E1000_CTRL_EXT); if ((hw->phy.media_type == e1000_media_type_copper) && - !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII)) { + !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII)) ret = !!(thstat & event); - } } return ret; } /** - * igb_watchdog - Timer Call-back - * @data: pointer to adapter cast into an unsigned long + * igb_watchdog - Timer Call-back + * @data: pointer to adapter cast into an unsigned long **/ static void igb_watchdog(unsigned long data) { @@ -3881,8 +3916,8 @@ static void igb_watchdog(unsigned long data) static void igb_watchdog_task(struct work_struct *work) { struct igb_adapter *adapter = container_of(work, - struct igb_adapter, - watchdog_task); + struct igb_adapter, + watchdog_task); struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; u32 link; @@ -3896,8 +3931,8 @@ static void igb_watchdog_task(struct work_struct *work) if (!netif_carrier_ok(netdev)) { u32 ctrl; hw->mac.ops.get_speed_and_duplex(hw, - &adapter->link_speed, - &adapter->link_duplex); + &adapter->link_speed, + &adapter->link_duplex); ctrl = rd32(E1000_CTRL); /* Links status message must follow this format */ @@ -3980,7 +4015,8 @@ static void igb_watchdog_task(struct work_struct *work) /* We've lost link, so the controller stops DMA, * but we've got queued Tx work that's never going * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). */ + * (Do the reset outside of interrupt context). + */ if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) { adapter->tx_timeout_count++; schedule_work(&adapter->reset_task); @@ -3993,7 +4029,7 @@ static void igb_watchdog_task(struct work_struct *work) set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); } - /* Cause software interrupt to ensure rx ring is cleaned */ + /* Cause software interrupt to ensure Rx ring is cleaned */ if (adapter->msix_entries) { u32 eics = 0; for (i = 0; i < adapter->num_q_vectors; i++) @@ -4020,20 +4056,20 @@ enum latency_range { }; /** - * igb_update_ring_itr - update the dynamic ITR value based on packet size + * igb_update_ring_itr - update the dynamic ITR value based on packet size + * @q_vector: pointer to q_vector * - * Stores a new ITR value based on strictly on packet size. This - * algorithm is less sophisticated than that used in igb_update_itr, - * due to the difficulty of synchronizing statistics across multiple - * receive rings. The divisors and thresholds used by this function - * were determined based on theoretical maximum wire speed and testing - * data, in order to minimize response time while increasing bulk - * throughput. - * This functionality is controlled by the InterruptThrottleRate module - * parameter (see igb_param.c) - * NOTE: This function is called only when operating in a multiqueue - * receive environment. - * @q_vector: pointer to q_vector + * Stores a new ITR value based on strictly on packet size. This + * algorithm is less sophisticated than that used in igb_update_itr, + * due to the difficulty of synchronizing statistics across multiple + * receive rings. The divisors and thresholds used by this function + * were determined based on theoretical maximum wire speed and testing + * data, in order to minimize response time while increasing bulk + * throughput. + * This functionality is controlled by the InterruptThrottleRate module + * parameter (see igb_param.c) + * NOTE: This function is called only when operating in a multiqueue + * receive environment. **/ static void igb_update_ring_itr(struct igb_q_vector *q_vector) { @@ -4094,20 +4130,21 @@ clear_counts: } /** - * igb_update_itr - update the dynamic ITR value based on statistics - * Stores a new ITR value based on packets and byte - * counts during the last interrupt. The advantage of per interrupt - * computation is faster updates and more accurate ITR for the current - * traffic pattern. Constants in this function were computed - * based on theoretical maximum wire speed and thresholds were set based - * on testing data as well as attempting to minimize response time - * while increasing bulk throughput. - * this functionality is controlled by the InterruptThrottleRate module - * parameter (see igb_param.c) - * NOTE: These calculations are only valid when operating in a single- - * queue environment. - * @q_vector: pointer to q_vector - * @ring_container: ring info to update the itr for + * igb_update_itr - update the dynamic ITR value based on statistics + * @q_vector: pointer to q_vector + * @ring_container: ring info to update the itr for + * + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + * this functionality is controlled by the InterruptThrottleRate module + * parameter (see igb_param.c) + * NOTE: These calculations are only valid when operating in a single- + * queue environment. **/ static void igb_update_itr(struct igb_q_vector *q_vector, struct igb_ring_container *ring_container) @@ -4205,12 +4242,12 @@ set_itr_now: if (new_itr != q_vector->itr_val) { /* this attempts to bias the interrupt rate towards Bulk * by adding intermediate steps when interrupt rate is - * increasing */ + * increasing + */ new_itr = new_itr > q_vector->itr_val ? - max((new_itr * q_vector->itr_val) / - (new_itr + (q_vector->itr_val >> 2)), - new_itr) : - new_itr; + max((new_itr * q_vector->itr_val) / + (new_itr + (q_vector->itr_val >> 2)), + new_itr) : new_itr; /* Don't write the value here; it resets the adapter's * internal timer, and causes us to delay far longer than * we should between interrupts. Instead, we write the ITR @@ -4337,8 +4374,8 @@ static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first) default: if (unlikely(net_ratelimit())) { dev_warn(tx_ring->dev, - "partial checksum but proto=%x!\n", - first->protocol); + "partial checksum but proto=%x!\n", + first->protocol); } break; } @@ -4361,8 +4398,8 @@ static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first) default: if (unlikely(net_ratelimit())) { dev_warn(tx_ring->dev, - "partial checksum but l4 proto=%x!\n", - l4_hdr); + "partial checksum but l4 proto=%x!\n", + l4_hdr); } break; } @@ -4514,8 +4551,7 @@ static void igb_tx_map(struct igb_ring *tx_ring, /* set the timestamp */ first->time_stamp = jiffies; - /* - * Force memory writes to complete before letting h/w know there + /* Force memory writes to complete before letting h/w know there * are new descriptors to fetch. (Only applicable for weak-ordered * memory model archs, such as IA-64). * @@ -4536,7 +4572,8 @@ static void igb_tx_map(struct igb_ring *tx_ring, writel(i, tx_ring->tail); /* we need this if more than one processor can write to our tail - * at a time, it syncronizes IO on IA64/Altix systems */ + * at a time, it synchronizes IO on IA64/Altix systems + */ mmiowb(); return; @@ -4566,11 +4603,13 @@ static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size) /* Herbert's original patch had: * smp_mb__after_netif_stop_queue(); - * but since that doesn't exist yet, just open code it. */ + * but since that doesn't exist yet, just open code it. + */ smp_mb(); /* We need to check again in a case another CPU has just - * made room available. */ + * made room available. + */ if (igb_desc_unused(tx_ring) < size) return -EBUSY; @@ -4594,7 +4633,6 @@ static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size) netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, struct igb_ring *tx_ring) { - struct igb_adapter *adapter = netdev_priv(tx_ring->netdev); struct igb_tx_buffer *first; int tso; u32 tx_flags = 0; @@ -4629,15 +4667,18 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, skb_tx_timestamp(skb); - if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && - !(adapter->ptp_tx_skb))) { - skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; - tx_flags |= IGB_TX_FLAGS_TSTAMP; + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { + struct igb_adapter *adapter = netdev_priv(tx_ring->netdev); - adapter->ptp_tx_skb = skb_get(skb); - adapter->ptp_tx_start = jiffies; - if (adapter->hw.mac.type == e1000_82576) - schedule_work(&adapter->ptp_tx_work); + if (!(adapter->ptp_tx_skb)) { + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + tx_flags |= IGB_TX_FLAGS_TSTAMP; + + adapter->ptp_tx_skb = skb_get(skb); + adapter->ptp_tx_start = jiffies; + if (adapter->hw.mac.type == e1000_82576) + schedule_work(&adapter->ptp_tx_work); + } } if (vlan_tx_tag_present(skb)) { @@ -4694,8 +4735,7 @@ static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, return NETDEV_TX_OK; } - /* - * The minimum packet size with TCTL.PSP set is 17 so pad the skb + /* The minimum packet size with TCTL.PSP set is 17 so pad the skb * in order to meet this minimum size requirement. */ if (unlikely(skb->len < 17)) { @@ -4709,8 +4749,8 @@ static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, } /** - * igb_tx_timeout - Respond to a Tx Hang - * @netdev: network interface device structure + * igb_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure **/ static void igb_tx_timeout(struct net_device *netdev) { @@ -4739,13 +4779,12 @@ static void igb_reset_task(struct work_struct *work) } /** - * igb_get_stats64 - Get System Network Statistics - * @netdev: network interface device structure - * @stats: rtnl_link_stats64 pointer - * + * igb_get_stats64 - Get System Network Statistics + * @netdev: network interface device structure + * @stats: rtnl_link_stats64 pointer **/ static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev, - struct rtnl_link_stats64 *stats) + struct rtnl_link_stats64 *stats) { struct igb_adapter *adapter = netdev_priv(netdev); @@ -4758,11 +4797,11 @@ static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev, } /** - * igb_change_mtu - Change the Maximum Transfer Unit - * @netdev: network interface device structure - * @new_mtu: new value for maximum frame size + * igb_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size * - * Returns 0 on success, negative on failure + * Returns 0 on success, negative on failure **/ static int igb_change_mtu(struct net_device *netdev, int new_mtu) { @@ -4805,10 +4844,9 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu) } /** - * igb_update_stats - Update the board statistics counters - * @adapter: board private structure + * igb_update_stats - Update the board statistics counters + * @adapter: board private structure **/ - void igb_update_stats(struct igb_adapter *adapter, struct rtnl_link_stats64 *net_stats) { @@ -4823,8 +4861,7 @@ void igb_update_stats(struct igb_adapter *adapter, #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF - /* - * Prevent stats update while adapter is being reset, or if the pci + /* Prevent stats update while adapter is being reset, or if the pci * connection is down. */ if (adapter->link_speed == 0) @@ -4958,7 +4995,8 @@ void igb_update_stats(struct igb_adapter *adapter, /* Rx Errors */ /* RLEC on some newer hardware can be incorrect so build - * our own version based on RUC and ROC */ + * our own version based on RUC and ROC + */ net_stats->rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + @@ -5017,7 +5055,8 @@ static irqreturn_t igb_msix_other(int irq, void *data) adapter->stats.doosync++; /* The DMA Out of Sync is also indication of a spoof event * in IOV mode. Check the Wrong VM Behavior register to - * see if it is really a spoof event. */ + * see if it is really a spoof event. + */ igb_check_wvbr(adapter); } @@ -5091,8 +5130,7 @@ static void igb_update_tx_dca(struct igb_adapter *adapter, if (hw->mac.type != e1000_82575) txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT; - /* - * We can enable relaxed ordering for reads, but not writes when + /* We can enable relaxed ordering for reads, but not writes when * DCA is enabled. This is due to a known issue in some chipsets * which will cause the DCA tag to be cleared. */ @@ -5113,8 +5151,7 @@ static void igb_update_rx_dca(struct igb_adapter *adapter, if (hw->mac.type != e1000_82575) rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT; - /* - * We can enable relaxed ordering for reads, but not writes when + /* We can enable relaxed ordering for reads, but not writes when * DCA is enabled. This is due to a known issue in some chipsets * which will cause the DCA tag to be cleared. */ @@ -5183,7 +5220,8 @@ static int __igb_notify_dca(struct device *dev, void *data) case DCA_PROVIDER_REMOVE: if (adapter->flags & IGB_FLAG_DCA_ENABLED) { /* without this a class_device is left - * hanging around in the sysfs model */ + * hanging around in the sysfs model + */ dca_remove_requester(dev); dev_info(&pdev->dev, "DCA disabled\n"); adapter->flags &= ~IGB_FLAG_DCA_ENABLED; @@ -5196,12 +5234,12 @@ static int __igb_notify_dca(struct device *dev, void *data) } static int igb_notify_dca(struct notifier_block *nb, unsigned long event, - void *p) + void *p) { int ret_val; ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event, - __igb_notify_dca); + __igb_notify_dca); return ret_val ? NOTIFY_BAD : NOTIFY_DONE; } @@ -5215,6 +5253,9 @@ static int igb_vf_configure(struct igb_adapter *adapter, int vf) eth_zero_addr(mac_addr); igb_set_vf_mac(adapter, vf, mac_addr); + /* By default spoof check is enabled for all VFs */ + adapter->vf_data[vf].spoofchk_enabled = true; + return 0; } @@ -5273,7 +5314,7 @@ static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) struct vf_data_storage *vf_data = &adapter->vf_data[vf]; vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC | - IGB_VF_FLAG_MULTI_PROMISC); + IGB_VF_FLAG_MULTI_PROMISC); vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME); if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) { @@ -5281,8 +5322,7 @@ static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC; *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST; } else { - /* - * if we have hashes and we are clearing a multicast promisc + /* if we have hashes and we are clearing a multicast promisc * flag we need to write the hashes to the MTA as this step * was previously skipped */ @@ -5303,7 +5343,6 @@ static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) return -EINVAL; return 0; - } static int igb_set_vf_multicasts(struct igb_adapter *adapter, @@ -5510,22 +5549,20 @@ static int igb_ndo_set_vf_vlan(struct net_device *netdev, "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf); if (test_bit(__IGB_DOWN, &adapter->state)) { dev_warn(&adapter->pdev->dev, - "The VF VLAN has been set," - " but the PF device is not up.\n"); + "The VF VLAN has been set, but the PF device is not up.\n"); dev_warn(&adapter->pdev->dev, - "Bring the PF device up before" - " attempting to use the VF device.\n"); + "Bring the PF device up before attempting to use the VF device.\n"); } } else { igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan, - false, vf); + false, vf); igb_set_vmvir(adapter, vlan, vf); igb_set_vmolr(adapter, vf, true); adapter->vf_data[vf].pf_vlan = 0; adapter->vf_data[vf].pf_qos = 0; - } + } out: - return err; + return err; } static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) @@ -5603,8 +5640,7 @@ static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf) static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf) { - /* - * The VF MAC Address is stored in a packed array of bytes + /* The VF MAC Address is stored in a packed array of bytes * starting at the second 32 bit word of the msg array */ unsigned char *addr = (char *)&msg[1]; @@ -5653,11 +5689,9 @@ static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf) if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK)) return; - /* - * until the vf completes a reset it should not be + /* until the vf completes a reset it should not be * allowed to start any configuration. */ - if (msgbuf[0] == E1000_VF_RESET) { igb_vf_reset_msg(adapter, vf); return; @@ -5677,9 +5711,8 @@ static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf) retval = igb_set_vf_mac_addr(adapter, msgbuf, vf); else dev_warn(&pdev->dev, - "VF %d attempted to override administratively " - "set MAC address\nReload the VF driver to " - "resume operations\n", vf); + "VF %d attempted to override administratively set MAC address\nReload the VF driver to resume operations\n", + vf); break; case E1000_VF_SET_PROMISC: retval = igb_set_vf_promisc(adapter, msgbuf, vf); @@ -5694,9 +5727,8 @@ static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf) retval = -1; if (vf_data->pf_vlan) dev_warn(&pdev->dev, - "VF %d attempted to override administratively " - "set VLAN tag\nReload the VF driver to " - "resume operations\n", vf); + "VF %d attempted to override administratively set VLAN tag\nReload the VF driver to resume operations\n", + vf); else retval = igb_set_vf_vlan(adapter, msgbuf, vf); break; @@ -5765,9 +5797,9 @@ static void igb_set_uta(struct igb_adapter *adapter) } /** - * igb_intr_msi - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure + * igb_intr_msi - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure **/ static irqreturn_t igb_intr_msi(int irq, void *data) { @@ -5810,9 +5842,9 @@ static irqreturn_t igb_intr_msi(int irq, void *data) } /** - * igb_intr - Legacy Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure + * igb_intr - Legacy Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure **/ static irqreturn_t igb_intr(int irq, void *data) { @@ -5820,11 +5852,13 @@ static irqreturn_t igb_intr(int irq, void *data) struct igb_q_vector *q_vector = adapter->q_vector[0]; struct e1000_hw *hw = &adapter->hw; /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No - * need for the IMC write */ + * need for the IMC write + */ u32 icr = rd32(E1000_ICR); /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is - * not set, then the adapter didn't send an interrupt */ + * not set, then the adapter didn't send an interrupt + */ if (!(icr & E1000_ICR_INT_ASSERTED)) return IRQ_NONE; @@ -5883,15 +5917,15 @@ static void igb_ring_irq_enable(struct igb_q_vector *q_vector) } /** - * igb_poll - NAPI Rx polling callback - * @napi: napi polling structure - * @budget: count of how many packets we should handle + * igb_poll - NAPI Rx polling callback + * @napi: napi polling structure + * @budget: count of how many packets we should handle **/ static int igb_poll(struct napi_struct *napi, int budget) { struct igb_q_vector *q_vector = container_of(napi, - struct igb_q_vector, - napi); + struct igb_q_vector, + napi); bool clean_complete = true; #ifdef CONFIG_IGB_DCA @@ -5916,10 +5950,10 @@ static int igb_poll(struct napi_struct *napi, int budget) } /** - * igb_clean_tx_irq - Reclaim resources after transmit completes - * @q_vector: pointer to q_vector containing needed info + * igb_clean_tx_irq - Reclaim resources after transmit completes + * @q_vector: pointer to q_vector containing needed info * - * returns true if ring is completely cleaned + * returns true if ring is completely cleaned **/ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) { @@ -6025,7 +6059,8 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) struct e1000_hw *hw = &adapter->hw; /* Detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i */ + * check with the clearing of time_stamp and movement of i + */ clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); if (tx_buffer->next_to_watch && time_after(jiffies, tx_buffer->time_stamp + @@ -6064,8 +6099,8 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) if (unlikely(total_packets && - netif_carrier_ok(tx_ring->netdev) && - igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) { + netif_carrier_ok(tx_ring->netdev) && + igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) { /* Make sure that anybody stopping the queue after this * sees the new next_to_clean. */ @@ -6086,11 +6121,11 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) } /** - * igb_reuse_rx_page - page flip buffer and store it back on the ring - * @rx_ring: rx descriptor ring to store buffers on - * @old_buff: donor buffer to have page reused + * igb_reuse_rx_page - page flip buffer and store it back on the ring + * @rx_ring: rx descriptor ring to store buffers on + * @old_buff: donor buffer to have page reused * - * Synchronizes page for reuse by the adapter + * Synchronizes page for reuse by the adapter **/ static void igb_reuse_rx_page(struct igb_ring *rx_ring, struct igb_rx_buffer *old_buff) @@ -6150,19 +6185,19 @@ static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer, } /** - * igb_add_rx_frag - Add contents of Rx buffer to sk_buff - * @rx_ring: rx descriptor ring to transact packets on - * @rx_buffer: buffer containing page to add - * @rx_desc: descriptor containing length of buffer written by hardware - * @skb: sk_buff to place the data into + * igb_add_rx_frag - Add contents of Rx buffer to sk_buff + * @rx_ring: rx descriptor ring to transact packets on + * @rx_buffer: buffer containing page to add + * @rx_desc: descriptor containing length of buffer written by hardware + * @skb: sk_buff to place the data into * - * This function will add the data contained in rx_buffer->page to the skb. - * This is done either through a direct copy if the data in the buffer is - * less than the skb header size, otherwise it will just attach the page as - * a frag to the skb. + * This function will add the data contained in rx_buffer->page to the skb. + * This is done either through a direct copy if the data in the buffer is + * less than the skb header size, otherwise it will just attach the page as + * a frag to the skb. * - * The function will then update the page offset if necessary and return - * true if the buffer can be reused by the adapter. + * The function will then update the page offset if necessary and return + * true if the buffer can be reused by the adapter. **/ static bool igb_add_rx_frag(struct igb_ring *rx_ring, struct igb_rx_buffer *rx_buffer, @@ -6305,8 +6340,7 @@ static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring, return NULL; } - /* - * we will be copying header into skb->data in + /* we will be copying header into skb->data in * pskb_may_pull so it is in our interest to prefetch * it now to avoid a possible cache miss */ @@ -6354,8 +6388,7 @@ static inline void igb_rx_checksum(struct igb_ring *ring, if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) { - /* - * work around errata with sctp packets where the TCPE aka + /* work around errata with sctp packets where the TCPE aka * L4E bit is set incorrectly on 64 byte (60 byte w/o crc) * packets, (aka let the stack check the crc32c) */ @@ -6386,15 +6419,15 @@ static inline void igb_rx_hash(struct igb_ring *ring, } /** - * igb_is_non_eop - process handling of non-EOP buffers - * @rx_ring: Rx ring being processed - * @rx_desc: Rx descriptor for current buffer - * @skb: current socket buffer containing buffer in progress + * igb_is_non_eop - process handling of non-EOP buffers + * @rx_ring: Rx ring being processed + * @rx_desc: Rx descriptor for current buffer + * @skb: current socket buffer containing buffer in progress * - * This function updates next to clean. If the buffer is an EOP buffer - * this function exits returning false, otherwise it will place the - * sk_buff in the next buffer to be chained and return true indicating - * that this is in fact a non-EOP buffer. + * This function updates next to clean. If the buffer is an EOP buffer + * this function exits returning false, otherwise it will place the + * sk_buff in the next buffer to be chained and return true indicating + * that this is in fact a non-EOP buffer. **/ static bool igb_is_non_eop(struct igb_ring *rx_ring, union e1000_adv_rx_desc *rx_desc) @@ -6414,15 +6447,15 @@ static bool igb_is_non_eop(struct igb_ring *rx_ring, } /** - * igb_get_headlen - determine size of header for LRO/GRO - * @data: pointer to the start of the headers - * @max_len: total length of section to find headers in + * igb_get_headlen - determine size of header for LRO/GRO + * @data: pointer to the start of the headers + * @max_len: total length of section to find headers in * - * This function is meant to determine the length of headers that will - * be recognized by hardware for LRO, and GRO offloads. The main - * motivation of doing this is to only perform one pull for IPv4 TCP - * packets so that we can do basic things like calculating the gso_size - * based on the average data per packet. + * This function is meant to determine the length of headers that will + * be recognized by hardware for LRO, and GRO offloads. The main + * motivation of doing this is to only perform one pull for IPv4 TCP + * packets so that we can do basic things like calculating the gso_size + * based on the average data per packet. **/ static unsigned int igb_get_headlen(unsigned char *data, unsigned int max_len) @@ -6473,7 +6506,7 @@ static unsigned int igb_get_headlen(unsigned char *data, return hdr.network - data; /* record next protocol if header is present */ - if (!hdr.ipv4->frag_off) + if (!(hdr.ipv4->frag_off & htons(IP_OFFSET))) nexthdr = hdr.ipv4->protocol; } else if (protocol == __constant_htons(ETH_P_IPV6)) { if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr))) @@ -6509,8 +6542,7 @@ static unsigned int igb_get_headlen(unsigned char *data, hdr.network += sizeof(struct udphdr); } - /* - * If everything has gone correctly hdr.network should be the + /* If everything has gone correctly hdr.network should be the * data section of the packet and will be the end of the header. * If not then it probably represents the end of the last recognized * header. @@ -6522,17 +6554,17 @@ static unsigned int igb_get_headlen(unsigned char *data, } /** - * igb_pull_tail - igb specific version of skb_pull_tail - * @rx_ring: rx descriptor ring packet is being transacted on - * @rx_desc: pointer to the EOP Rx descriptor - * @skb: pointer to current skb being adjusted + * igb_pull_tail - igb specific version of skb_pull_tail + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being adjusted * - * This function is an igb specific version of __pskb_pull_tail. The - * main difference between this version and the original function is that - * this function can make several assumptions about the state of things - * that allow for significant optimizations versus the standard function. - * As a result we can do things like drop a frag and maintain an accurate - * truesize for the skb. + * This function is an igb specific version of __pskb_pull_tail. The + * main difference between this version and the original function is that + * this function can make several assumptions about the state of things + * that allow for significant optimizations versus the standard function. + * As a result we can do things like drop a frag and maintain an accurate + * truesize for the skb. */ static void igb_pull_tail(struct igb_ring *rx_ring, union e1000_adv_rx_desc *rx_desc, @@ -6542,8 +6574,7 @@ static void igb_pull_tail(struct igb_ring *rx_ring, unsigned char *va; unsigned int pull_len; - /* - * it is valid to use page_address instead of kmap since we are + /* it is valid to use page_address instead of kmap since we are * working with pages allocated out of the lomem pool per * alloc_page(GFP_ATOMIC) */ @@ -6563,8 +6594,7 @@ static void igb_pull_tail(struct igb_ring *rx_ring, va += IGB_TS_HDR_LEN; } - /* - * we need the header to contain the greater of either ETH_HLEN or + /* we need the header to contain the greater of either ETH_HLEN or * 60 bytes if the skb->len is less than 60 for skb_pad. */ pull_len = igb_get_headlen(va, IGB_RX_HDR_LEN); @@ -6580,24 +6610,23 @@ static void igb_pull_tail(struct igb_ring *rx_ring, } /** - * igb_cleanup_headers - Correct corrupted or empty headers - * @rx_ring: rx descriptor ring packet is being transacted on - * @rx_desc: pointer to the EOP Rx descriptor - * @skb: pointer to current skb being fixed + * igb_cleanup_headers - Correct corrupted or empty headers + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being fixed * - * Address the case where we are pulling data in on pages only - * and as such no data is present in the skb header. + * Address the case where we are pulling data in on pages only + * and as such no data is present in the skb header. * - * In addition if skb is not at least 60 bytes we need to pad it so that - * it is large enough to qualify as a valid Ethernet frame. + * In addition if skb is not at least 60 bytes we need to pad it so that + * it is large enough to qualify as a valid Ethernet frame. * - * Returns true if an error was encountered and skb was freed. + * Returns true if an error was encountered and skb was freed. **/ static bool igb_cleanup_headers(struct igb_ring *rx_ring, union e1000_adv_rx_desc *rx_desc, struct sk_buff *skb) { - if (unlikely((igb_test_staterr(rx_desc, E1000_RXDEXT_ERR_FRAME_ERR_MASK)))) { struct net_device *netdev = rx_ring->netdev; @@ -6624,14 +6653,14 @@ static bool igb_cleanup_headers(struct igb_ring *rx_ring, } /** - * igb_process_skb_fields - Populate skb header fields from Rx descriptor - * @rx_ring: rx descriptor ring packet is being transacted on - * @rx_desc: pointer to the EOP Rx descriptor - * @skb: pointer to current skb being populated + * igb_process_skb_fields - Populate skb header fields from Rx descriptor + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being populated * - * This function checks the ring, descriptor, and packet information in - * order to populate the hash, checksum, VLAN, timestamp, protocol, and - * other fields within the skb. + * This function checks the ring, descriptor, and packet information in + * order to populate the hash, checksum, VLAN, timestamp, protocol, and + * other fields within the skb. **/ static void igb_process_skb_fields(struct igb_ring *rx_ring, union e1000_adv_rx_desc *rx_desc, @@ -6762,8 +6791,7 @@ static bool igb_alloc_mapped_page(struct igb_ring *rx_ring, /* map page for use */ dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE); - /* - * if mapping failed free memory back to system since + /* if mapping failed free memory back to system since * there isn't much point in holding memory we can't use */ if (dma_mapping_error(rx_ring->dev, dma)) { @@ -6789,8 +6817,8 @@ static inline unsigned int igb_rx_offset(struct igb_ring *rx_ring) } /** - * igb_alloc_rx_buffers - Replace used receive buffers; packet split - * @adapter: address of board private structure + * igb_alloc_rx_buffers - Replace used receive buffers; packet split + * @adapter: address of board private structure **/ void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count) { @@ -6810,8 +6838,7 @@ void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count) if (!igb_alloc_mapped_page(rx_ring, bi)) break; - /* - * Refresh the desc even if buffer_addrs didn't change + /* Refresh the desc even if buffer_addrs didn't change * because each write-back erases this info. */ rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + @@ -6842,8 +6869,7 @@ void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count) /* update next to alloc since we have filled the ring */ rx_ring->next_to_alloc = i; - /* - * Force memory writes to complete before letting h/w + /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). @@ -7004,15 +7030,24 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx) mac->autoneg = 0; /* Make sure dplx is at most 1 bit and lsb of speed is not set - * for the switch() below to work */ + * for the switch() below to work + */ if ((spd & 1) || (dplx & ~1)) goto err_inval; - /* Fiber NIC's only allow 1000 Gbps Full duplex */ - if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) && - spd != SPEED_1000 && - dplx != DUPLEX_FULL) - goto err_inval; + /* Fiber NIC's only allow 1000 gbps Full duplex + * and 100Mbps Full duplex for 100baseFx sfp + */ + if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) { + switch (spd + dplx) { + case SPEED_10 + DUPLEX_HALF: + case SPEED_10 + DUPLEX_FULL: + case SPEED_100 + DUPLEX_HALF: + goto err_inval; + default: + break; + } + } switch (spd + dplx) { case SPEED_10 + DUPLEX_HALF: @@ -7111,7 +7146,8 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake, igb_power_up_link(adapter); /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ + * would have already happened in close and is redundant. + */ igb_release_hw_control(adapter); pci_disable_device(pdev); @@ -7173,7 +7209,8 @@ static int igb_resume(struct device *dev) igb_reset(adapter); /* let the f/w know that the h/w is now under the control of the - * driver. */ + * driver. + */ igb_get_hw_control(adapter); wr32(E1000_WUS, ~0); @@ -7309,8 +7346,7 @@ static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs) } #ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs +/* Polling 'interrupt' - used by things like netconsole to send skbs * without having to re-enable interrupts. It's not called while * the interrupt routine is executing. */ @@ -7333,13 +7369,13 @@ static void igb_netpoll(struct net_device *netdev) #endif /* CONFIG_NET_POLL_CONTROLLER */ /** - * igb_io_error_detected - called when PCI error is detected - * @pdev: Pointer to PCI device - * @state: The current pci connection state + * igb_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state * - * This function is called after a PCI bus error affecting - * this device has been detected. - */ + * This function is called after a PCI bus error affecting + * this device has been detected. + **/ static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { @@ -7360,12 +7396,12 @@ static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev, } /** - * igb_io_slot_reset - called after the pci bus has been reset. - * @pdev: Pointer to PCI device + * igb_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device * - * Restart the card from scratch, as if from a cold-boot. Implementation - * resembles the first-half of the igb_resume routine. - */ + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the igb_resume routine. + **/ static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -7393,8 +7429,9 @@ static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev) err = pci_cleanup_aer_uncorrect_error_status(pdev); if (err) { - dev_err(&pdev->dev, "pci_cleanup_aer_uncorrect_error_status " - "failed 0x%0x\n", err); + dev_err(&pdev->dev, + "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n", + err); /* non-fatal, continue */ } @@ -7402,12 +7439,12 @@ static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev) } /** - * igb_io_resume - called when traffic can start flowing again. - * @pdev: Pointer to PCI device + * igb_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device * - * This callback is called when the error recovery driver tells us that - * its OK to resume normal operation. Implementation resembles the - * second-half of the igb_resume routine. + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the igb_resume routine. */ static void igb_io_resume(struct pci_dev *pdev) { @@ -7424,12 +7461,13 @@ static void igb_io_resume(struct pci_dev *pdev) netif_device_attach(netdev); /* let the f/w know that the h/w is now under the control of the - * driver. */ + * driver. + */ igb_get_hw_control(adapter); } static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index, - u8 qsel) + u8 qsel) { u32 rar_low, rar_high; struct e1000_hw *hw = &adapter->hw; @@ -7438,7 +7476,7 @@ static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index, * from network order (big endian) to little endian */ rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | - ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); /* Indicate to hardware the Address is Valid. */ @@ -7456,11 +7494,12 @@ static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index, } static int igb_set_vf_mac(struct igb_adapter *adapter, - int vf, unsigned char *mac_addr) + int vf, unsigned char *mac_addr) { struct e1000_hw *hw = &adapter->hw; /* VF MAC addresses start at end of receive addresses and moves - * torwards the first, as a result a collision should not be possible */ + * towards the first, as a result a collision should not be possible + */ int rar_entry = hw->mac.rar_entry_count - (vf + 1); memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN); @@ -7477,13 +7516,13 @@ static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) return -EINVAL; adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC; dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf); - dev_info(&adapter->pdev->dev, "Reload the VF driver to make this" - " change effective."); + dev_info(&adapter->pdev->dev, + "Reload the VF driver to make this change effective."); if (test_bit(__IGB_DOWN, &adapter->state)) { - dev_warn(&adapter->pdev->dev, "The VF MAC address has been set," - " but the PF device is not up.\n"); - dev_warn(&adapter->pdev->dev, "Bring the PF device up before" - " attempting to use the VF device.\n"); + dev_warn(&adapter->pdev->dev, + "The VF MAC address has been set, but the PF device is not up.\n"); + dev_warn(&adapter->pdev->dev, + "Bring the PF device up before attempting to use the VF device.\n"); } return igb_set_vf_mac(adapter, vf, mac); } @@ -7510,19 +7549,19 @@ static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate, /* Calculate the rate factor values to set */ rf_int = link_speed / tx_rate; rf_dec = (link_speed - (rf_int * tx_rate)); - rf_dec = (rf_dec * (1<<E1000_RTTBCNRC_RF_INT_SHIFT)) / tx_rate; + rf_dec = (rf_dec * (1 << E1000_RTTBCNRC_RF_INT_SHIFT)) / + tx_rate; bcnrc_val = E1000_RTTBCNRC_RS_ENA; - bcnrc_val |= ((rf_int<<E1000_RTTBCNRC_RF_INT_SHIFT) & - E1000_RTTBCNRC_RF_INT_MASK); + bcnrc_val |= ((rf_int << E1000_RTTBCNRC_RF_INT_SHIFT) & + E1000_RTTBCNRC_RF_INT_MASK); bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK); } else { bcnrc_val = 0; } wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */ - /* - * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM + /* Set global transmit compensation time to the MMW_SIZE in RTTBCNRM * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported. */ wr32(E1000_RTTBCNRM, 0x14); @@ -7544,8 +7583,7 @@ static void igb_check_vf_rate_limit(struct igb_adapter *adapter) reset_rate = true; adapter->vf_rate_link_speed = 0; dev_info(&adapter->pdev->dev, - "Link speed has been changed. VF Transmit " - "rate is disabled\n"); + "Link speed has been changed. VF Transmit rate is disabled\n"); } for (i = 0; i < adapter->vfs_allocated_count; i++) { @@ -7553,8 +7591,8 @@ static void igb_check_vf_rate_limit(struct igb_adapter *adapter) adapter->vf_data[i].tx_rate = 0; igb_set_vf_rate_limit(&adapter->hw, i, - adapter->vf_data[i].tx_rate, - actual_link_speed); + adapter->vf_data[i].tx_rate, + actual_link_speed); } } @@ -7580,6 +7618,33 @@ static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate) return 0; } +static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, + bool setting) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 reg_val, reg_offset; + + if (!adapter->vfs_allocated_count) + return -EOPNOTSUPP; + + if (vf >= adapter->vfs_allocated_count) + return -EINVAL; + + reg_offset = (hw->mac.type == e1000_82576) ? E1000_DTXSWC : E1000_TXSWC; + reg_val = rd32(reg_offset); + if (setting) + reg_val |= ((1 << vf) | + (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT))); + else + reg_val &= ~((1 << vf) | + (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT))); + wr32(reg_offset, reg_val); + + adapter->vf_data[vf].spoofchk_enabled = setting; + return E1000_SUCCESS; +} + static int igb_ndo_get_vf_config(struct net_device *netdev, int vf, struct ifla_vf_info *ivi) { @@ -7591,6 +7656,7 @@ static int igb_ndo_get_vf_config(struct net_device *netdev, ivi->tx_rate = adapter->vf_data[vf].tx_rate; ivi->vlan = adapter->vf_data[vf].pf_vlan; ivi->qos = adapter->vf_data[vf].pf_qos; + ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled; return 0; } @@ -7603,6 +7669,7 @@ static void igb_vmm_control(struct igb_adapter *adapter) case e1000_82575: case e1000_i210: case e1000_i211: + case e1000_i354: default: /* replication is not supported for 82575 */ return; @@ -7625,7 +7692,7 @@ static void igb_vmm_control(struct igb_adapter *adapter) igb_vmdq_set_loopback_pf(hw, true); igb_vmdq_set_replication_pf(hw, true); igb_vmdq_set_anti_spoofing_pf(hw, true, - adapter->vfs_allocated_count); + adapter->vfs_allocated_count); } else { igb_vmdq_set_loopback_pf(hw, false); igb_vmdq_set_replication_pf(hw, false); @@ -7645,8 +7712,7 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) /* force threshold to 0. */ wr32(E1000_DMCTXTH, 0); - /* - * DMA Coalescing high water mark needs to be greater + /* DMA Coalescing high water mark needs to be greater * than the Rx threshold. Set hwm to PBA - max frame * size in 16B units, capping it at PBA - 6KB. */ @@ -7659,8 +7725,7 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) & E1000_FCRTC_RTH_COAL_MASK); wr32(E1000_FCRTC, reg); - /* - * Set the DMA Coalescing Rx threshold to PBA - 2 * max + /* Set the DMA Coalescing Rx threshold to PBA - 2 * max * frame size, capping it at PBA - 10KB. */ dmac_thr = pba - adapter->max_frame_size / 512; @@ -7678,11 +7743,12 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) reg |= (1000 >> 5); /* Disable BMC-to-OS Watchdog Enable */ - reg &= ~E1000_DMACR_DC_BMC2OSW_EN; + if (hw->mac.type != e1000_i354) + reg &= ~E1000_DMACR_DC_BMC2OSW_EN; + wr32(E1000_DMACR, reg); - /* - * no lower threshold to disable + /* no lower threshold to disable * coalescing(smart fifb)-UTRESH=0 */ wr32(E1000_DMCRTRH, 0); @@ -7691,15 +7757,13 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) wr32(E1000_DMCTLX, reg); - /* - * free space in tx packet buffer to wake from + /* free space in tx packet buffer to wake from * DMA coal */ wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE - (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6); - /* - * make low power state decision controlled + /* make low power state decision controlled * by DMA coal */ reg = rd32(E1000_PCIEMISC); @@ -7713,7 +7777,8 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) } } -/* igb_read_i2c_byte - Reads 8 bit word over I2C +/** + * igb_read_i2c_byte - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read * @dev_addr: device address @@ -7721,9 +7786,9 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) * * Performs byte read operation over I2C interface at * a specified device address. - */ + **/ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data) + u8 dev_addr, u8 *data) { struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); struct i2c_client *this_client = adapter->i2c_client; @@ -7750,7 +7815,8 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, } } -/* igb_write_i2c_byte - Writes 8 bit word over I2C +/** + * igb_write_i2c_byte - Writes 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to write * @dev_addr: device address @@ -7758,9 +7824,9 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, * * Performs byte write operation over I2C interface at * a specified device address. - */ + **/ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data) + u8 dev_addr, u8 data) { struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); struct i2c_client *this_client = adapter->i2c_client; diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 0a237507ee85..7e8c477b0ab9 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -1,5 +1,4 @@ -/* - * PTP Hardware Clock (PHC) driver for the Intel 82576 and 82580 +/* PTP Hardware Clock (PHC) driver for the Intel 82576 and 82580 * * Copyright (C) 2011 Richard Cochran <richardcochran@gmail.com> * @@ -27,8 +26,7 @@ #define INCVALUE_MASK 0x7fffffff #define ISGN 0x80000000 -/* - * The 82580 timesync updates the system timer every 8ns by 8ns, +/* The 82580 timesync updates the system timer every 8ns by 8ns, * and this update value cannot be reprogrammed. * * Neither the 82576 nor the 82580 offer registers wide enough to hold @@ -77,10 +75,7 @@ #define INCVALUE_82576 (16 << IGB_82576_TSYNC_SHIFT) #define IGB_NBITS_82580 40 -/* - * SYSTIM read access for the 82576 - */ - +/* SYSTIM read access for the 82576 */ static cycle_t igb_ptp_read_82576(const struct cyclecounter *cc) { struct igb_adapter *igb = container_of(cc, struct igb_adapter, cc); @@ -97,10 +92,7 @@ static cycle_t igb_ptp_read_82576(const struct cyclecounter *cc) return val; } -/* - * SYSTIM read access for the 82580 - */ - +/* SYSTIM read access for the 82580 */ static cycle_t igb_ptp_read_82580(const struct cyclecounter *cc) { struct igb_adapter *igb = container_of(cc, struct igb_adapter, cc); @@ -108,8 +100,7 @@ static cycle_t igb_ptp_read_82580(const struct cyclecounter *cc) u64 val; u32 lo, hi, jk; - /* - * The timestamp latches on lowest register read. For the 82580 + /* The timestamp latches on lowest register read. For the 82580 * the lowest register is SYSTIMR instead of SYSTIML. However we only * need to provide nanosecond resolution, so we just ignore it. */ @@ -123,17 +114,13 @@ static cycle_t igb_ptp_read_82580(const struct cyclecounter *cc) return val; } -/* - * SYSTIM read access for I210/I211 - */ - +/* SYSTIM read access for I210/I211 */ static void igb_ptp_read_i210(struct igb_adapter *adapter, struct timespec *ts) { struct e1000_hw *hw = &adapter->hw; u32 sec, nsec, jk; - /* - * The timestamp latches on lowest register read. For I210/I211, the + /* The timestamp latches on lowest register read. For I210/I211, the * lowest register is SYSTIMR. Since we only need to provide nanosecond * resolution, we can ignore it. */ @@ -150,8 +137,7 @@ static void igb_ptp_write_i210(struct igb_adapter *adapter, { struct e1000_hw *hw = &adapter->hw; - /* - * Writing the SYSTIMR register is not necessary as it only provides + /* Writing the SYSTIMR register is not necessary as it only provides * sub-nanosecond resolution. */ wr32(E1000_SYSTIML, ts->tv_nsec); @@ -185,6 +171,7 @@ static void igb_ptp_systim_to_hwtstamp(struct igb_adapter *adapter, switch (adapter->hw.mac.type) { case e1000_82576: case e1000_82580: + case e1000_i354: case e1000_i350: spin_lock_irqsave(&adapter->tmreg_lock, flags); @@ -207,10 +194,7 @@ static void igb_ptp_systim_to_hwtstamp(struct igb_adapter *adapter, } } -/* - * PTP clock operations - */ - +/* PTP clock operations */ static int igb_ptp_adjfreq_82576(struct ptp_clock_info *ptp, s32 ppb) { struct igb_adapter *igb = container_of(ptp, struct igb_adapter, @@ -387,7 +371,7 @@ static int igb_ptp_enable(struct ptp_clock_info *ptp, * * This work function polls the TSYNCTXCTL valid bit to determine when a * timestamp has been taken for the current stored skb. - */ + **/ void igb_ptp_tx_work(struct work_struct *work) { struct igb_adapter *adapter = container_of(work, struct igb_adapter, @@ -437,7 +421,7 @@ static void igb_ptp_overflow_check(struct work_struct *work) * dropped an Rx packet that was timestamped when the ring is full. The * particular error is rare but leaves the device in a state unable to timestamp * any future packets. - */ + **/ void igb_ptp_rx_hang(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -481,7 +465,7 @@ void igb_ptp_rx_hang(struct igb_adapter *adapter) * If we were asked to do hardware stamping and such a time stamp is * available, then it must have been for this skb here because we only * allow only one such packet into the queue. - */ + **/ void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -506,15 +490,14 @@ void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter) * This function is meant to retrieve a timestamp from the first buffer of an * incoming frame. The value is stored in little endian format starting on * byte 8. - */ + **/ void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, unsigned char *va, struct sk_buff *skb) { __le64 *regval = (__le64 *)va; - /* - * The timestamp is recorded in little endian format. + /* The timestamp is recorded in little endian format. * DWORD: 0 1 2 3 * Field: Reserved Reserved SYSTIML SYSTIMH */ @@ -529,7 +512,7 @@ void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, * * This function is meant to retrieve a timestamp from the internal registers * of the adapter and store it in the skb. - */ + **/ void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb) { @@ -537,8 +520,7 @@ void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, struct e1000_hw *hw = &adapter->hw; u64 regval; - /* - * If this bit is set, then the RX registers contain the time stamp. No + /* If this bit is set, then the RX registers contain the time stamp. No * other packet will be time stamped until we read these registers, so * read the registers to make them available again. Because only one * packet can be time stamped at a time, we know that the register @@ -574,7 +556,6 @@ void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, * type has to be specified. Matching the kind of event packet is * not supported, with the exception of "all V2 events regardless of * level 2 or 4". - * **/ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) @@ -655,10 +636,9 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, return 0; } - /* - * Per-packet timestamping only works if all packets are + /* Per-packet timestamping only works if all packets are * timestamped, so enable timestamping in all packets as - * long as one rx filter was configured. + * long as one Rx filter was configured. */ if ((hw->mac.type >= e1000_82580) && tsync_rx_ctl) { tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED; @@ -756,6 +736,7 @@ void igb_ptp_init(struct igb_adapter *adapter) wr32(E1000_TIMINCA, INCPERIOD_82576 | INCVALUE_82576); break; case e1000_82580: + case e1000_i354: case e1000_i350: snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr); adapter->ptp_caps.owner = THIS_MODULE; @@ -844,6 +825,7 @@ void igb_ptp_stop(struct igb_adapter *adapter) switch (adapter->hw.mac.type) { case e1000_82576: case e1000_82580: + case e1000_i354: case e1000_i350: cancel_delayed_work_sync(&adapter->ptp_overflow_work); break; @@ -888,6 +870,7 @@ void igb_ptp_reset(struct igb_adapter *adapter) wr32(E1000_TIMINCA, INCPERIOD_82576 | INCVALUE_82576); break; case e1000_82580: + case e1000_i354: case e1000_i350: case e1000_i210: case e1000_i211: diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index a8e10cff7a89..ca932387a80f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -740,6 +740,11 @@ extern void ixgbe_dbg_adapter_init(struct ixgbe_adapter *adapter); extern void ixgbe_dbg_adapter_exit(struct ixgbe_adapter *adapter); extern void ixgbe_dbg_init(void); extern void ixgbe_dbg_exit(void); +#else +static inline void ixgbe_dbg_adapter_init(struct ixgbe_adapter *adapter) {} +static inline void ixgbe_dbg_adapter_exit(struct ixgbe_adapter *adapter) {} +static inline void ixgbe_dbg_init(void) {} +static inline void ixgbe_dbg_exit(void) {} #endif /* CONFIG_DEBUG_FS */ static inline struct netdev_queue *txring_txq(const struct ixgbe_ring *ring) { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 6bd1dd13682c..c022f9c417a6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -5123,14 +5123,14 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) netif_device_detach(netdev); + rtnl_lock(); if (netif_running(netdev)) { - rtnl_lock(); ixgbe_down(adapter); ixgbe_free_irq(adapter); ixgbe_free_all_tx_resources(adapter); ixgbe_free_all_rx_resources(adapter); - rtnl_unlock(); } + rtnl_unlock(); ixgbe_clear_interrupt_scheme(adapter); @@ -7206,6 +7206,7 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id, case IXGBE_SUBDEV_ID_82599_SFP: case IXGBE_SUBDEV_ID_82599_RNDC: case IXGBE_SUBDEV_ID_82599_ECNA_DP: + case IXGBE_SUBDEV_ID_82599_LOM_SFP: is_wol_supported = 1; break; } @@ -7625,9 +7626,7 @@ skip_sriov: e_err(probe, "failed to allocate sysfs resources\n"); #endif /* CONFIG_IXGBE_HWMON */ -#ifdef CONFIG_DEBUG_FS ixgbe_dbg_adapter_init(adapter); -#endif /* CONFIG_DEBUG_FS */ /* Need link setup for MNG FW, else wait for IXGBE_UP */ if (hw->mng_fw_enabled && hw->mac.ops.setup_link) @@ -7669,9 +7668,7 @@ static void ixgbe_remove(struct pci_dev *pdev) struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); struct net_device *netdev = adapter->netdev; -#ifdef CONFIG_DEBUG_FS ixgbe_dbg_adapter_exit(adapter); -#endif /*CONFIG_DEBUG_FS */ set_bit(__IXGBE_DOWN, &adapter->state); cancel_work_sync(&adapter->service_task); @@ -7934,15 +7931,11 @@ static int __init ixgbe_init_module(void) pr_info("%s - version %s\n", ixgbe_driver_string, ixgbe_driver_version); pr_info("%s\n", ixgbe_copyright); -#ifdef CONFIG_DEBUG_FS ixgbe_dbg_init(); -#endif /* CONFIG_DEBUG_FS */ ret = pci_register_driver(&ixgbe_driver); if (ret) { -#ifdef CONFIG_DEBUG_FS ixgbe_dbg_exit(); -#endif /* CONFIG_DEBUG_FS */ return ret; } @@ -7968,9 +7961,7 @@ static void __exit ixgbe_exit_module(void) #endif pci_unregister_driver(&ixgbe_driver); -#ifdef CONFIG_DEBUG_FS ixgbe_dbg_exit(); -#endif /* CONFIG_DEBUG_FS */ rcu_barrier(); /* Wait for completion of call_rcu()'s */ } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 155a793705be..402f1a2ada3e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -57,6 +57,7 @@ #define IXGBE_SUBDEV_ID_82599_RNDC 0x1F72 #define IXGBE_SUBDEV_ID_82599_560FLR 0x17D0 #define IXGBE_SUBDEV_ID_82599_ECNA_DP 0x0470 +#define IXGBE_SUBDEV_ID_82599_LOM_SFP 0x8976 #define IXGBE_DEV_ID_82599_SFP_EM 0x1507 #define IXGBE_DEV_ID_82599_SFP_SF2 0x154D #define IXGBE_DEV_ID_82599EN_SFP 0x1557 |
