diff options
| -rw-r--r-- | drivers/input/rmi4/rmi_f30.c | 326 |
1 files changed, 144 insertions, 182 deletions
diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c index f4b491e3e0fd..c5eb4d034e84 100644 --- a/drivers/input/rmi4/rmi_f30.c +++ b/drivers/input/rmi4/rmi_f30.c @@ -16,30 +16,24 @@ /* Defs for Query 0 */ #define RMI_F30_EXTENDED_PATTERNS 0x01 -#define RMI_F30_HAS_MAPPABLE_BUTTONS (1 << 1) -#define RMI_F30_HAS_LED (1 << 2) -#define RMI_F30_HAS_GPIO (1 << 3) -#define RMI_F30_HAS_HAPTIC (1 << 4) -#define RMI_F30_HAS_GPIO_DRV_CTL (1 << 5) -#define RMI_F30_HAS_MECH_MOUSE_BTNS (1 << 6) +#define RMI_F30_HAS_MAPPABLE_BUTTONS BIT(1) +#define RMI_F30_HAS_LED BIT(2) +#define RMI_F30_HAS_GPIO BIT(3) +#define RMI_F30_HAS_HAPTIC BIT(4) +#define RMI_F30_HAS_GPIO_DRV_CTL BIT(5) +#define RMI_F30_HAS_MECH_MOUSE_BTNS BIT(6) /* Defs for Query 1 */ #define RMI_F30_GPIO_LED_COUNT 0x1F /* Defs for Control Registers */ #define RMI_F30_CTRL_1_GPIO_DEBOUNCE 0x01 -#define RMI_F30_CTRL_1_HALT (1 << 4) -#define RMI_F30_CTRL_1_HALTED (1 << 5) +#define RMI_F30_CTRL_1_HALT BIT(4) +#define RMI_F30_CTRL_1_HALTED BIT(5) #define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS 0x03 -struct rmi_f30_ctrl_data { - int address; - int length; - u8 *regs; -}; - #define RMI_F30_CTRL_MAX_REGS 32 -#define RMI_F30_CTRL_MAX_BYTES ((RMI_F30_CTRL_MAX_REGS + 7) >> 3) +#define RMI_F30_CTRL_MAX_BYTES DIV_ROUND_UP(RMI_F30_CTRL_MAX_REGS, 8) #define RMI_F30_CTRL_MAX_REG_BLOCKS 11 #define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES \ @@ -54,6 +48,12 @@ struct rmi_f30_ctrl_data { + 1 \ + 1) +struct rmi_f30_ctrl_data { + int address; + int length; + u8 *regs; +}; + struct f30_data { /* Query Data */ bool has_extended_pattern; @@ -81,13 +81,13 @@ struct f30_data { static int rmi_f30_read_control_parameters(struct rmi_function *fn, struct f30_data *f30) { - struct rmi_device *rmi_dev = fn->rmi_dev; - int error = 0; + int error; - error = rmi_read_block(rmi_dev, fn->fd.control_base_addr, - f30->ctrl_regs, f30->ctrl_regs_size); + error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr, + f30->ctrl_regs, f30->ctrl_regs_size); if (error) { - dev_err(&rmi_dev->dev, "%s : Could not read control registers at 0x%x error (%d)\n", + dev_err(&fn->dev, + "%s: Could not read control registers at 0x%x: %d\n", __func__, fn->fd.control_base_addr, error); return error; } @@ -95,24 +95,32 @@ static int rmi_f30_read_control_parameters(struct rmi_function *fn, return 0; } +static void rmi_f30_report_button(struct rmi_function *fn, + struct f30_data *f30, unsigned int button) +{ + unsigned int reg_num = button >> 3; + unsigned int bit_num = button & 0x07; + bool key_down = !(f30->data_regs[reg_num] & BIT(bit_num)); + + rmi_dbg(RMI_DEBUG_FN, &fn->dev, + "%s: call input report key (0x%04x) value (0x%02x)", + __func__, f30->gpioled_key_map[button], key_down); + + input_report_key(f30->input, f30->gpioled_key_map[button], key_down); +} + static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) { struct f30_data *f30 = dev_get_drvdata(&fn->dev); - struct rmi_device *rmi_dev = fn->rmi_dev; - struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); - int retval; - int gpiled = 0; - int value = 0; + struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev); + int error; int i; - int reg_num; - - if (!f30->input) - return 0; /* Read the gpi led data. */ if (drvdata->attn_data.data) { if (drvdata->attn_data.size < f30->register_count) { - dev_warn(&fn->dev, "F30 interrupted, but data is missing\n"); + dev_warn(&fn->dev, + "F30 interrupted, but data is missing\n"); return 0; } memcpy(f30->data_regs, drvdata->attn_data.data, @@ -120,72 +128,21 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) drvdata->attn_data.data += f30->register_count; drvdata->attn_data.size -= f30->register_count; } else { - retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr, - f30->data_regs, f30->register_count); - - if (retval) { - dev_err(&fn->dev, "%s: Failed to read F30 data registers.\n", - __func__); - return retval; - } - } - - for (reg_num = 0; reg_num < f30->register_count; ++reg_num) { - for (i = 0; gpiled < f30->gpioled_count && i < 8; ++i, - ++gpiled) { - if (f30->gpioled_key_map[gpiled] != 0) { - /* buttons have pull up resistors */ - value = (((f30->data_regs[reg_num] >> i) & 0x01) - == 0); - - rmi_dbg(RMI_DEBUG_FN, &fn->dev, - "%s: call input report key (0x%04x) value (0x%02x)", - __func__, - f30->gpioled_key_map[gpiled], value); - input_report_key(f30->input, - f30->gpioled_key_map[gpiled], - value); - } - + error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr, + f30->data_regs, f30->register_count); + if (error) { + dev_err(&fn->dev, + "%s: Failed to read F30 data registers: %d\n", + __func__, error); + return error; } } - return 0; -} - -static int rmi_f30_register_device(struct rmi_function *fn) -{ - int i; - struct rmi_device *rmi_dev = fn->rmi_dev; - struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev); - struct f30_data *f30 = dev_get_drvdata(&fn->dev); - struct input_dev *input_dev; - int button_count = 0; - - input_dev = drv_data->input; - if (!input_dev) { - dev_info(&fn->dev, "F30: no input device found, ignoring.\n"); - return -EINVAL; - } - - f30->input = input_dev; - - set_bit(EV_KEY, input_dev->evbit); - - input_dev->keycode = f30->gpioled_key_map; - input_dev->keycodesize = sizeof(u16); - input_dev->keycodemax = f30->gpioled_count; - - for (i = 0; i < f30->gpioled_count; i++) { - if (f30->gpioled_key_map[i] != 0) { - input_set_capability(input_dev, EV_KEY, - f30->gpioled_key_map[i]); - button_count++; - } - } + if (f30->has_gpio) + for (i = 0; i < f30->gpioled_count; i++) + if (f30->gpioled_key_map[i] != KEY_RESERVED) + rmi_f30_report_button(fn, f30, i); - if (button_count == 1) - __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); return 0; } @@ -204,19 +161,20 @@ static int rmi_f30_config(struct rmi_function *fn) error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr, f30->ctrl_regs, f30->ctrl_regs_size); if (error) { - dev_err(&fn->rmi_dev->dev, - "%s : Could not write control registers at 0x%x error (%d)\n", + dev_err(&fn->dev, + "%s: Could not write control registers at 0x%x: %d\n", __func__, fn->fd.control_base_addr, error); return error; } drv->set_irq_bits(fn->rmi_dev, fn->irq_mask); } + return 0; } -static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl, - int *ctrl_addr, int len, u8 **reg) +static void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl, + int *ctrl_addr, int len, u8 **reg) { ctrl->address = *ctrl_addr; ctrl->length = len; @@ -225,8 +183,7 @@ static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl, *reg += len; } -static inline bool rmi_f30_is_valid_button(int button, - struct rmi_f30_ctrl_data *ctrl) +static bool rmi_f30_is_valid_button(int button, struct rmi_f30_ctrl_data *ctrl) { int byte_position = button >> 3; int bit_position = button & 0x07; @@ -239,32 +196,60 @@ static inline bool rmi_f30_is_valid_button(int button, (ctrl[3].regs[byte_position] & BIT(bit_position)); } -static inline int rmi_f30_initialize(struct rmi_function *fn) +static int rmi_f30_map_gpios(struct rmi_function *fn, + struct f30_data *f30) { - struct f30_data *f30; - struct rmi_device *rmi_dev = fn->rmi_dev; - const struct rmi_device_platform_data *pdata; - int retval = 0; - int control_address; + const struct rmi_device_platform_data *pdata = + rmi_get_platform_data(fn->rmi_dev); + struct input_dev *input = f30->input; + unsigned int button = BTN_LEFT; int i; - int button; - u8 buf[RMI_F30_QUERY_SIZE]; - u8 *ctrl_reg; - u8 *map_memory; - f30 = devm_kzalloc(&fn->dev, sizeof(struct f30_data), - GFP_KERNEL); - if (!f30) + f30->gpioled_key_map = devm_kcalloc(&fn->dev, + f30->gpioled_count, + sizeof(f30->gpioled_key_map[0]), + GFP_KERNEL); + if (!f30->gpioled_key_map) { + dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n"); return -ENOMEM; + } - dev_set_drvdata(&fn->dev, f30); + for (i = 0; i < f30->gpioled_count; i++) { + if (rmi_f30_is_valid_button(i, f30->ctrl)) { + f30->gpioled_key_map[i] = button; + input_set_capability(input, EV_KEY, button++); + + /* + * buttonpad might be given by + * f30->has_mech_mouse_btns, but I am + * not sure, so use only the pdata info + */ + if (pdata->f30_data.buttonpad) { + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); + break; + } + } + } + + input->keycode = f30->gpioled_key_map; + input->keycodesize = sizeof(f30->gpioled_key_map[0]); + input->keycodemax = f30->gpioled_count; + + return 0; +} - retval = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, buf, - RMI_F30_QUERY_SIZE); +static int rmi_f30_initialize(struct rmi_function *fn, struct f30_data *f30) +{ + u8 *ctrl_reg = f30->ctrl_regs; + int control_address = fn->fd.control_base_addr; + u8 buf[RMI_F30_QUERY_SIZE]; + int error; - if (retval) { - dev_err(&fn->dev, "Failed to read query register.\n"); - return retval; + error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, + buf, RMI_F30_QUERY_SIZE); + if (error) { + dev_err(&fn->dev, "Failed to read query register\n"); + return error; } f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS; @@ -276,101 +261,71 @@ static inline int rmi_f30_initialize(struct rmi_function *fn) f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS; f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT; - f30->register_count = (f30->gpioled_count + 7) >> 3; - - control_address = fn->fd.control_base_addr; - ctrl_reg = f30->ctrl_regs; + f30->register_count = DIV_ROUND_UP(f30->gpioled_count, 8); if (f30->has_gpio && f30->has_led) rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address, - f30->register_count, &ctrl_reg); + f30->register_count, &ctrl_reg); - rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, sizeof(u8), - &ctrl_reg); + rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, + sizeof(u8), &ctrl_reg); if (f30->has_gpio) { rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address, - f30->register_count, &ctrl_reg); + f30->register_count, &ctrl_reg); rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address, - f30->register_count, &ctrl_reg); + f30->register_count, &ctrl_reg); } if (f30->has_led) { - int ctrl5_len; - rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address, - f30->register_count, &ctrl_reg); - - if (f30->has_extended_pattern) - ctrl5_len = 6; - else - ctrl5_len = 2; + f30->register_count, &ctrl_reg); rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address, - ctrl5_len, &ctrl_reg); + f30->has_extended_pattern ? 6 : 2, + &ctrl_reg); } if (f30->has_led || f30->has_gpio_driver_control) { /* control 6 uses a byte per gpio/led */ rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address, - f30->gpioled_count, &ctrl_reg); + f30->gpioled_count, &ctrl_reg); } if (f30->has_mappable_buttons) { /* control 7 uses a byte per gpio/led */ rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address, - f30->gpioled_count, &ctrl_reg); + f30->gpioled_count, &ctrl_reg); } if (f30->has_haptic) { rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address, - f30->register_count, &ctrl_reg); + f30->register_count, &ctrl_reg); rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address, - sizeof(u8), &ctrl_reg); + sizeof(u8), &ctrl_reg); } if (f30->has_mech_mouse_btns) rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address, - sizeof(u8), &ctrl_reg); + sizeof(u8), &ctrl_reg); - f30->ctrl_regs_size = ctrl_reg - f30->ctrl_regs - ?: RMI_F30_CTRL_REGS_MAX_SIZE; + f30->ctrl_regs_size = ctrl_reg - + f30->ctrl_regs ?: RMI_F30_CTRL_REGS_MAX_SIZE; - retval = rmi_f30_read_control_parameters(fn, f30); - if (retval < 0) { + error = rmi_f30_read_control_parameters(fn, f30); + if (error) { dev_err(&fn->dev, - "Failed to initialize F19 control params.\n"); - return retval; - } - - map_memory = devm_kzalloc(&fn->dev, - (f30->gpioled_count * (sizeof(u16))), - GFP_KERNEL); - if (!map_memory) { - dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n"); - return -ENOMEM; + "Failed to initialize F30 control params: %d\n", + error); + return error; } - f30->gpioled_key_map = (u16 *)map_memory; - - pdata = rmi_get_platform_data(rmi_dev); if (f30->has_gpio) { - button = BTN_LEFT; - for (i = 0; i < f30->gpioled_count; i++) { - if (rmi_f30_is_valid_button(i, f30->ctrl)) { - f30->gpioled_key_map[i] = button++; - - /* - * buttonpad might be given by - * f30->has_mech_mouse_btns, but I am - * not sure, so use only the pdata info - */ - if (pdata->f30_data.buttonpad) - break; - } - } + error = rmi_f30_map_gpios(fn, f30); + if (error) + return error; } return 0; @@ -378,26 +333,33 @@ static inline int rmi_f30_initialize(struct rmi_function *fn) static int rmi_f30_probe(struct rmi_function *fn) { - int rc; + struct rmi_device *rmi_dev = fn->rmi_dev; const struct rmi_device_platform_data *pdata = - rmi_get_platform_data(fn->rmi_dev); + rmi_get_platform_data(rmi_dev); + struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev); + struct f30_data *f30; + int error; if (pdata->f30_data.disable) return 0; - rc = rmi_f30_initialize(fn); - if (rc < 0) - goto error_exit; + if (!drv_data->input) { + dev_info(&fn->dev, "F30: no input device found, ignoring\n"); + return -ENXIO; + } - rc = rmi_f30_register_device(fn); - if (rc < 0) - goto error_exit; + f30 = devm_kzalloc(&fn->dev, sizeof(*f30), GFP_KERNEL); + if (!f30) + return -ENOMEM; - return 0; + f30->input = drv_data->input; -error_exit: - return rc; + error = rmi_f30_initialize(fn, f30); + if (error) + return error; + dev_set_drvdata(&fn->dev, f30); + return 0; } struct rmi_function_handler rmi_f30_handler = { |
