diff options
| -rw-r--r-- | arch/arm/boot/dts/exynos4210-trats.dts | 592 |
1 files changed, 296 insertions, 296 deletions
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 32c5fd8f6269..98f3ce65cb9a 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -89,42 +89,6 @@ }; }; - hsotg@12480000 { - vusb_d-supply = <&vusb_reg>; - vusb_a-supply = <&vusbdac_reg>; - dr_mode = "peripheral"; - status = "okay"; - }; - - sdhci_emmc: sdhci@12510000 { - bus-width = <8>; - non-removable; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&vemmc_reg>; - status = "okay"; - }; - - exynos-usbphy@125B0000 { - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - gpio-keys { compatible = "gpio-keys"; @@ -158,201 +122,6 @@ }; }; - i2c@13890000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - mms114-touchscreen@48 { - compatible = "melfas,mms114"; - reg = <0x48>; - interrupt-parent = <&gpx0>; - interrupts = <4 2>; - x-size = <720>; - y-size = <1280>; - avdd-supply = <&tsp_reg>; - vdd-supply = <&tsp_reg>; - }; - }; - - i2c@138B0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c5_bus>; - pinctrl-names = "default"; - status = "okay"; - - max8997_pmic@66 { - compatible = "maxim,max8997-pmic"; - - reg = <0x66>; - - max8997,pmic-buck1-uses-gpio-dvs; - max8997,pmic-buck2-uses-gpio-dvs; - max8997,pmic-buck5-uses-gpio-dvs; - - max8997,pmic-ignore-gpiodvs-side-effect; - max8997,pmic-buck125-default-dvs-idx = <0>; - - max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>, - <&gpl0 0 0>; - - max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, - <1250000>, <1200000>, - <1150000>, <1100000>, - <1000000>, <950000>; - - max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, - <950000>, <900000>, - <1100000>, <1000000>, - <950000>, <900000>; - - max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - regulators { - valive_reg: LDO2 { - regulator-name = "VALIVE_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vusb_reg: LDO3 { - regulator-name = "VUSB_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - vmipi_reg: LDO4 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vpda_reg: LDO6 { - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcam_reg: LDO7 { - regulator-name = "CAM_ISP_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vusbdac_reg: LDO8 { - regulator-name = "VUSB/VDAC_3.3V_C210"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vccpda_reg: LDO9 { - regulator-name = "VCC_2.8V_PDA"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - vpll_reg: LDO10 { - regulator-name = "VPLL_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vtcam_reg: LDO12 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vcclcd_reg: LDO13 { - regulator-name = "VCC_3.3V_LCD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vlcd_reg: LDO15 { - regulator-name = "VLCD_2.2V"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - }; - - camsensor_reg: LDO16 { - regulator-name = "CAM_SENSOR_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddq_reg: LDO21 { - regulator-name = "VDDQ_M1M2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - varm_breg: BUCK1 { - /* - * HACK: The real name is VARM_1.2V_C210, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - vint_breg: BUCK2 { - regulator-name = "VINT_1.1V_C210"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - camisp_breg: BUCK4 { - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vmem_breg: BUCK5 { - regulator-name = "VMEM_1.2V_C210"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vccsub_breg: BUCK7 { - regulator-name = "VCC_SUB_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - safe1_sreg: ESAFEOUT1 { - regulator-name = "SAFEOUT1"; - regulator-always-on; - }; - - safe2_sreg: ESAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-boot-on; - }; - }; - }; - }; - fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -365,71 +134,6 @@ }; }; - dsi_0: dsi@11C80000 { - vddcore-supply = <&vusb_reg>; - vddio-supply = <&vmipi_reg>; - samsung,pll-clock-frequency = <24000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - remote-endpoint = <&dsi_in>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - }; - }; - }; - - panel@0 { - reg = <0>; - compatible = "samsung,s6e8aa0"; - vdd3-supply = <&vcclcd_reg>; - vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <58>; - panel-height-mm = <103>; - - display-timings { - timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - - port { - dsi_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - }; - }; - - fimd@11c00000 { - status = "okay"; - }; - - tmu@100C0000 { - status = "okay"; - }; - thermal-zones { cpu_thermal: cpu-thermal { cooling-maps { @@ -483,3 +187,299 @@ }; }; }; + +&dsi_0 { + vddcore-supply = <&vusb_reg>; + vddio-supply = <&vmipi_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + reg = <0>; + compatible = "samsung,s6e8aa0"; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&exynos_usbphy { + status = "okay"; +}; + +&fimd { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpx0>; + interrupts = <4 2>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&tsp_reg>; + vdd-supply = <&tsp_reg>; + }; +}; + +&i2c_5 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + status = "okay"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + + reg = <0x66>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, + <&gpx0 6 0>, + <&gpl0 0 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + valive_reg: LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vusb_reg: LDO3 { + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vmipi_reg: LDO4 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vpda_reg: LDO6 { + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcam_reg: LDO7 { + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vusbdac_reg: LDO8 { + regulator-name = "VUSB/VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccpda_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vpll_reg: LDO10 { + regulator-name = "VPLL_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vtcam_reg: LDO12 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcclcd_reg: LDO13 { + regulator-name = "VCC_3.3V_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vlcd_reg: LDO15 { + regulator-name = "VLCD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + camsensor_reg: LDO16 { + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddq_reg: LDO21 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + varm_breg: BUCK1 { + /* + * HACK: The real name is VARM_1.2V_C210, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vint_breg: BUCK2 { + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + camisp_breg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vmem_breg: BUCK5 { + regulator-name = "VMEM_1.2V_C210"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vccsub_breg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; +}; + +&sdhci_0 { + bus-width = <8>; + non-removable; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&vemmc_reg>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; |
