diff options
| -rw-r--r-- | drivers/scsi/lpfc/lpfc.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_debugfs.c | 931 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_debugfs.h | 48 |
3 files changed, 759 insertions, 222 deletions
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 60e98a62f308..02d53d89534f 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -805,6 +805,8 @@ struct lpfc_hba { struct dentry *idiag_root; struct dentry *idiag_pci_cfg; struct dentry *idiag_que_info; + struct dentry *idiag_que_acc; + struct dentry *idiag_drb_acc; #endif /* Used for deferred freeing of ELS data buffers */ diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 3d967741c708..c93fca058603 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1119,172 +1119,14 @@ lpfc_debugfs_dumpDataDif_release(struct inode *inode, struct file *file) } /* + * --------------------------------- * iDiag debugfs file access methods - */ - -/* - * iDiag PCI config space register access methods: - * - * The PCI config space register accessees of read, write, read-modify-write - * for set bits, and read-modify-write for clear bits to SLI4 PCI functions - * are provided. In the proper SLI4 PCI function's debugfs iDiag directory, - * - * /sys/kernel/debug/lpfc/fn<#>/iDiag - * - * the access is through the debugfs entry pciCfg: - * - * 1. For PCI config space register read access, there are two read methods: - * A) read a single PCI config space register in the size of a byte - * (8 bits), a word (16 bits), or a dword (32 bits); or B) browse through - * the 4K extended PCI config space. - * - * A) Read a single PCI config space register consists of two steps: - * - * Step-1: Set up PCI config space register read command, the command - * syntax is, - * - * echo 1 <where> <count> > pciCfg - * - * where, 1 is the iDiag command for PCI config space read, <where> is the - * offset from the beginning of the device's PCI config space to read from, - * and <count> is the size of PCI config space register data to read back, - * it will be 1 for reading a byte (8 bits), 2 for reading a word (16 bits - * or 2 bytes), or 4 for reading a dword (32 bits or 4 bytes). - * - * Setp-2: Perform the debugfs read operation to execute the idiag command - * set up in Step-1, - * - * cat pciCfg - * - * Examples: - * To read PCI device's vendor-id and device-id from PCI config space, - * - * echo 1 0 4 > pciCfg - * cat pciCfg - * - * To read PCI device's currnt command from config space, - * - * echo 1 4 2 > pciCfg - * cat pciCfg - * - * B) Browse through the entire 4K extended PCI config space also consists - * of two steps: - * - * Step-1: Set up PCI config space register browsing command, the command - * syntax is, - * - * echo 1 0 4096 > pciCfg - * - * where, 1 is the iDiag command for PCI config space read, 0 must be used - * as the offset for PCI config space register browse, and 4096 must be - * used as the count for PCI config space register browse. - * - * Step-2: Repeately issue the debugfs read operation to browse through - * the entire PCI config space registers: - * - * cat pciCfg - * cat pciCfg - * cat pciCfg - * ... - * - * When browsing to the end of the 4K PCI config space, the browse method - * shall wrap around to start reading from beginning again, and again... - * - * 2. For PCI config space register write access, it supports a single PCI - * config space register write in the size of a byte (8 bits), a word - * (16 bits), or a dword (32 bits). The command syntax is, - * - * echo 2 <where> <count> <value> > pciCfg - * - * where, 2 is the iDiag command for PCI config space write, <where> is - * the offset from the beginning of the device's PCI config space to write - * into, <count> is the size of data to write into the PCI config space, - * it will be 1 for writing a byte (8 bits), 2 for writing a word (16 bits - * or 2 bytes), or 4 for writing a dword (32 bits or 4 bytes), and <value> - * is the data to be written into the PCI config space register at the - * offset. - * - * Examples: - * To disable PCI device's interrupt assertion, - * - * 1) Read in device's PCI config space register command field <cmd>: - * - * echo 1 4 2 > pciCfg - * cat pciCfg - * - * 2) Set bit 10 (Interrupt Disable bit) in the <cmd>: - * - * <cmd> = <cmd> | (1 < 10) - * - * 3) Write the modified command back: - * - * echo 2 4 2 <cmd> > pciCfg - * - * 3. For PCI config space register set bits access, it supports a single PCI - * config space register set bits in the size of a byte (8 bits), a word - * (16 bits), or a dword (32 bits). The command syntax is, - * - * echo 3 <where> <count> <bitmask> > pciCfg - * - * where, 3 is the iDiag command for PCI config space set bits, <where> is - * the offset from the beginning of the device's PCI config space to set - * bits into, <count> is the size of the bitmask to set into the PCI config - * space, it will be 1 for setting a byte (8 bits), 2 for setting a word - * (16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 bytes), and - * <bitmask> is the bitmask, indicating the bits to be set into the PCI - * config space register at the offset. The logic performed to the content - * of the PCI config space register, regval, is, - * - * regval |= <bitmask> - * - * 4. For PCI config space register clear bits access, it supports a single - * PCI config space register clear bits in the size of a byte (8 bits), - * a word (16 bits), or a dword (32 bits). The command syntax is, - * - * echo 4 <where> <count> <bitmask> > pciCfg - * - * where, 4 is the iDiag command for PCI config space clear bits, <where> - * is the offset from the beginning of the device's PCI config space to - * clear bits from, <count> is the size of the bitmask to set into the PCI - * config space, it will be 1 for setting a byte (8 bits), 2 for setting - * a word(16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 - * bytes), and <bitmask> is the bitmask, indicating the bits to be cleared - * from the PCI config space register at the offset. the logic performed - * to the content of the PCI config space register, regval, is, - * - * regval &= ~<bitmask> - * - * Note, for all single register read, write, set bits, or clear bits access, - * the offset (<where>) must be aligned with the size of the data: - * - * For data size of byte (8 bits), the offset must be aligned to the byte - * boundary; for data size of word (16 bits), the offset must be aligned - * to the word boundary; while for data size of dword (32 bits), the offset - * must be aligned to the dword boundary. Otherwise, the interface will - * return the error: + * --------------------------------- * - * "-bash: echo: write error: Invalid argument". + * All access methods are through the proper SLI4 PCI function's debugfs + * iDiag directory: * - * For example: - * - * echo 1 2 4 > pciCfg - * -bash: echo: write error: Invalid argument - * - * Note also, all of the numbers in the command fields for all read, write, - * set bits, and clear bits PCI config space register command fields can be - * either decimal or hex. - * - * For example, - * echo 1 0 4096 > pciCfg - * - * will be the same as - * echo 1 0 0x1000 > pciCfg - * - * And, - * echo 2 155 1 10 > pciCfg - * - * will be - * echo 2 0x9b 1 0xa > pciCfg + * /sys/kernel/debug/lpfc/fn<#>/iDiag */ /** @@ -1331,10 +1173,10 @@ static int lpfc_idiag_cmd_get(const char __user *buf, size_t nbytes, for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) { step_str = strsep(&pbuf, "\t "); if (!step_str) - return 0; + return i; idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0); } - return 0; + return i; } /** @@ -1403,7 +1245,7 @@ lpfc_idiag_release(struct inode *inode, struct file *file) * Description: * This routine frees the buffer that was allocated when the debugfs file * was opened. It also reset the fields in the idiag command struct in the - * case the command is not continuous browsing of the data structure. + * case of command for write operation. * * Returns: * This function returns zero. @@ -1413,18 +1255,20 @@ lpfc_idiag_cmd_release(struct inode *inode, struct file *file) { struct lpfc_debug *debug = file->private_data; - /* Read PCI config register, if not read all, clear command fields */ - if ((debug->op == LPFC_IDIAG_OP_RD) && - (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD)) - if ((idiag.cmd.data[1] == sizeof(uint8_t)) || - (idiag.cmd.data[1] == sizeof(uint16_t)) || - (idiag.cmd.data[1] == sizeof(uint32_t))) + if (debug->op == LPFC_IDIAG_OP_WR) { + switch (idiag.cmd.opcode) { + case LPFC_IDIAG_CMD_PCICFG_WR: + case LPFC_IDIAG_CMD_PCICFG_ST: + case LPFC_IDIAG_CMD_PCICFG_CL: + case LPFC_IDIAG_CMD_QUEACC_WR: + case LPFC_IDIAG_CMD_QUEACC_ST: + case LPFC_IDIAG_CMD_QUEACC_CL: memset(&idiag, 0, sizeof(idiag)); - - /* Write PCI config register, clear command fields */ - if ((debug->op == LPFC_IDIAG_OP_WR) && - (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)) - memset(&idiag, 0, sizeof(idiag)); + break; + default: + break; + } + } /* Free the buffers to the file operation */ kfree(debug->buffer); @@ -1504,7 +1348,7 @@ lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes, len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, "%03x: %08x\n", where, u32val); break; - case LPFC_PCI_CFG_SIZE: /* browse all */ + case LPFC_PCI_CFG_BROWSE: /* browse all */ goto pcicfg_browse; break; default: @@ -1586,16 +1430,21 @@ lpfc_idiag_pcicfg_write(struct file *file, const char __user *buf, debug->op = LPFC_IDIAG_OP_WR; rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); - if (rc) + if (rc < 0) return rc; if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) { + /* Sanity check on PCI config read command line arguments */ + if (rc != LPFC_PCI_CFG_RD_CMD_ARG) + goto error_out; /* Read command from PCI config space, set up command fields */ where = idiag.cmd.data[0]; count = idiag.cmd.data[1]; - if (count == LPFC_PCI_CFG_SIZE) { - if (where != 0) + if (count == LPFC_PCI_CFG_BROWSE) { + if (where % sizeof(uint32_t)) goto error_out; + /* Starting offset to browse */ + idiag.offset.last_rd = where; } else if ((count != sizeof(uint8_t)) && (count != sizeof(uint16_t)) && (count != sizeof(uint32_t))) @@ -1621,6 +1470,9 @@ lpfc_idiag_pcicfg_write(struct file *file, const char __user *buf, } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR || idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST || idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { + /* Sanity check on PCI config write command line arguments */ + if (rc != LPFC_PCI_CFG_WR_CMD_ARG) + goto error_out; /* Write command to PCI config space, read-modify-write */ where = idiag.cmd.data[0]; count = idiag.cmd.data[1]; @@ -1753,10 +1605,12 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "Slow-path EQ information:\n"); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\tID [%02d], EQE-COUNT [%04d], " - "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", + "\tEQID[%02d], " + "QE-COUNT[%04d], QE-SIZE[%04d], " + "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n", phba->sli4_hba.sp_eq->queue_id, phba->sli4_hba.sp_eq->entry_count, + phba->sli4_hba.sp_eq->entry_size, phba->sli4_hba.sp_eq->host_index, phba->sli4_hba.sp_eq->hba_index); @@ -1765,10 +1619,12 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, "Fast-path EQ information:\n"); for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) { len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\tID [%02d], EQE-COUNT [%04d], " - "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", + "\tEQID[%02d], " + "QE-COUNT[%04d], QE-SIZE[%04d], " + "HOST-INDEX[%04d], PORT-INDEX[%04d]\n", phba->sli4_hba.fp_eq[fcp_qidx]->queue_id, phba->sli4_hba.fp_eq[fcp_qidx]->entry_count, + phba->sli4_hba.fp_eq[fcp_qidx]->entry_size, phba->sli4_hba.fp_eq[fcp_qidx]->host_index, phba->sli4_hba.fp_eq[fcp_qidx]->hba_index); } @@ -1776,89 +1632,101 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, /* Get mailbox complete queue information */ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "Mailbox CQ information:\n"); + "Slow-path MBX CQ information:\n"); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\t\tAssociated EQ-ID [%02d]:\n", + "Associated EQID[%02d]:\n", phba->sli4_hba.mbx_cq->assoc_qid); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\tID [%02d], CQE-COUNT [%04d], " - "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", + "\tCQID[%02d], " + "QE-COUNT[%04d], QE-SIZE[%04d], " + "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n", phba->sli4_hba.mbx_cq->queue_id, phba->sli4_hba.mbx_cq->entry_count, + phba->sli4_hba.mbx_cq->entry_size, phba->sli4_hba.mbx_cq->host_index, phba->sli4_hba.mbx_cq->hba_index); /* Get slow-path complete queue information */ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "Slow-path CQ information:\n"); + "Slow-path ELS CQ information:\n"); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\t\tAssociated EQ-ID [%02d]:\n", + "Associated EQID[%02d]:\n", phba->sli4_hba.els_cq->assoc_qid); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\tID [%02d], CQE-COUNT [%04d], " - "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", + "\tCQID [%02d], " + "QE-COUNT[%04d], QE-SIZE[%04d], " + "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n", phba->sli4_hba.els_cq->queue_id, phba->sli4_hba.els_cq->entry_count, + phba->sli4_hba.els_cq->entry_size, phba->sli4_hba.els_cq->host_index, phba->sli4_hba.els_cq->hba_index); /* Get fast-path complete queue information */ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "Fast-path CQ information:\n"); + "Fast-path FCP CQ information:\n"); for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) { len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\t\tAssociated EQ-ID [%02d]:\n", + "Associated EQID[%02d]:\n", phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\tID [%02d], EQE-COUNT [%04d], " - "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", - phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id, - phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count, - phba->sli4_hba.fcp_cq[fcp_qidx]->host_index, - phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index); + "\tCQID[%02d], " + "QE-COUNT[%04d], QE-SIZE[%04d], " + "HOST-INDEX[%04d], PORT-INDEX[%04d]\n", + phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id, + phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count, + phba->sli4_hba.fcp_cq[fcp_qidx]->entry_size, + phba->sli4_hba.fcp_cq[fcp_qidx]->host_index, + phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index); } len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); /* Get mailbox queue information */ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "Mailbox MQ information:\n"); + "Slow-path MBX MQ information:\n"); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\t\tAssociated CQ-ID [%02d]:\n", + "Associated CQID[%02d]:\n", phba->sli4_hba.mbx_wq->assoc_qid); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\tID [%02d], MQE-COUNT [%04d], " - "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", + "\tWQID[%02d], " + "QE-COUNT[%04d], QE-SIZE[%04d], " + "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n", phba->sli4_hba.mbx_wq->queue_id, phba->sli4_hba.mbx_wq->entry_count, + phba->sli4_hba.mbx_wq->entry_size, phba->sli4_hba.mbx_wq->host_index, phba->sli4_hba.mbx_wq->hba_index); /* Get slow-path work queue information */ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "Slow-path WQ information:\n"); + "Slow-path ELS WQ information:\n"); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\t\tAssociated CQ-ID [%02d]:\n", + "Associated CQID[%02d]:\n", phba->sli4_hba.els_wq->assoc_qid); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\tID [%02d], WQE-COUNT [%04d], " - "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", + "\tWQID[%02d], " + "QE-COUNT[%04d], QE-SIZE[%04d], " + "HOST-INDEX[%04d], PORT-INDEX[%04d]\n\n", phba->sli4_hba.els_wq->queue_id, phba->sli4_hba.els_wq->entry_count, + phba->sli4_hba.els_wq->entry_size, phba->sli4_hba.els_wq->host_index, phba->sli4_hba.els_wq->hba_index); /* Get fast-path work queue information */ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "Fast-path WQ information:\n"); + "Fast-path FCP WQ information:\n"); for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++) { len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\t\tAssociated CQ-ID [%02d]:\n", + "Associated CQID[%02d]:\n", phba->sli4_hba.fcp_wq[fcp_qidx]->assoc_qid); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\tID [%02d], WQE-COUNT [%04d], " - "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", + "\tWQID[%02d], " + "QE-COUNT[%04d], WQE-SIZE[%04d], " + "HOST-INDEX[%04d], PORT-INDEX[%04d]\n", phba->sli4_hba.fcp_wq[fcp_qidx]->queue_id, phba->sli4_hba.fcp_wq[fcp_qidx]->entry_count, + phba->sli4_hba.fcp_wq[fcp_qidx]->entry_size, phba->sli4_hba.fcp_wq[fcp_qidx]->host_index, phba->sli4_hba.fcp_wq[fcp_qidx]->hba_index); } @@ -1868,26 +1736,597 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "Slow-path RQ information:\n"); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\t\tAssociated CQ-ID [%02d]:\n", + "Associated CQID[%02d]:\n", phba->sli4_hba.hdr_rq->assoc_qid); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\tID [%02d], RHQE-COUNT [%04d], " - "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", + "\tHQID[%02d], " + "QE-COUNT[%04d], QE-SIZE[%04d], " + "HOST-INDEX[%04d], PORT-INDEX[%04d]\n", phba->sli4_hba.hdr_rq->queue_id, phba->sli4_hba.hdr_rq->entry_count, + phba->sli4_hba.hdr_rq->entry_size, phba->sli4_hba.hdr_rq->host_index, phba->sli4_hba.hdr_rq->hba_index); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, - "\tID [%02d], RDQE-COUNT [%04d], " - "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", + "\tDQID[%02d], " + "QE-COUNT[%04d], QE-SIZE[%04d], " + "HOST-INDEX[%04d], PORT-INDEX[%04d]\n", phba->sli4_hba.dat_rq->queue_id, phba->sli4_hba.dat_rq->entry_count, + phba->sli4_hba.dat_rq->entry_size, phba->sli4_hba.dat_rq->host_index, phba->sli4_hba.dat_rq->hba_index); return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); } +/** + * lpfc_idiag_que_param_check - queue access command parameter sanity check + * @q: The pointer to queue structure. + * @index: The index into a queue entry. + * @count: The number of queue entries to access. + * + * Description: + * The routine performs sanity check on device queue access method commands. + * + * Returns: + * This function returns -EINVAL when fails the sanity check, otherwise, it + * returns 0. + **/ +static int +lpfc_idiag_que_param_check(struct lpfc_queue *q, int index, int count) +{ + /* Only support single entry read or browsing */ + if ((count != 1) && (count != LPFC_QUE_ACC_BROWSE)) + return -EINVAL; + if (index > q->entry_count - 1) + return -EINVAL; + return 0; +} + +/** + * lpfc_idiag_queacc_read_qe - read a single entry from the given queue index + * @pbuffer: The pointer to buffer to copy the read data into. + * @pque: The pointer to the queue to be read. + * @index: The index into the queue entry. + * + * Description: + * This routine reads out a single entry from the given queue's index location + * and copies it into the buffer provided. + * + * Returns: + * This function returns 0 when it fails, otherwise, it returns the length of + * the data read into the buffer provided. + **/ +static int +lpfc_idiag_queacc_read_qe(char *pbuffer, int len, struct lpfc_queue *pque, + uint32_t index) +{ + int offset, esize; + uint32_t *pentry; + + if (!pbuffer || !pque) + return 0; + + esize = pque->entry_size; + len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len, + "QE-INDEX[%04d]:\n", index); + + offset = 0; + pentry = pque->qe[index].address; + while (esize > 0) { + len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len, + "%08x ", *pentry); + pentry++; + offset += sizeof(uint32_t); + esize -= sizeof(uint32_t); + if (esize > 0 && !(offset % (4 * sizeof(uint32_t)))) + len += snprintf(pbuffer+len, + LPFC_QUE_ACC_BUF_SIZE-len, "\n"); + } + len += snprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len, "\n"); + + return len; +} + +/** + * lpfc_idiag_queacc_read - idiag debugfs read port queue + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba device queue memory according to the + * idiag command, and copies to user @buf. Depending on the queue dump read + * command setup, it does either a single queue entry read or browing through + * all entries of the queue. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_queacc_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + uint32_t last_index, index, count; + struct lpfc_queue *pque = NULL; + char *pbuffer; + int len = 0; + + /* This is a user read operation */ + debug->op = LPFC_IDIAG_OP_RD; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_QUE_ACC_BUF_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + + if (*ppos) + return 0; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) { + index = idiag.cmd.data[2]; + count = idiag.cmd.data[3]; + pque = (struct lpfc_queue *)idiag.ptr_private; + } else + return 0; + + /* Browse the queue starting from index */ + if (count == LPFC_QUE_ACC_BROWSE) + goto que_browse; + + /* Read a single entry from the queue */ + len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index); + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); + +que_browse: + + /* Browse all entries from the queue */ + last_index = idiag.offset.last_rd; + index = last_index; + + while (len < LPFC_QUE_ACC_SIZE - pque->entry_size) { + len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index); + index++; + if (index > pque->entry_count - 1) + break; + } + + /* Set up the offset for next portion of pci cfg read */ + if (index > pque->entry_count - 1) + index = 0; + idiag.offset.last_rd = index; + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +/** + * lpfc_idiag_queacc_write - Syntax check and set up idiag queacc commands + * @file: The file pointer to read from. + * @buf: The buffer to copy the user data from. + * @nbytes: The number of bytes to get. + * @ppos: The position in the file to start reading from. + * + * This routine get the debugfs idiag command struct from user space and then + * perform the syntax check for port queue read (dump) or write (set) command + * accordingly. In the case of port queue read command, it sets up the command + * in the idiag command struct for the following debugfs read operation. In + * the case of port queue write operation, it executes the write operation + * into the port queue entry accordingly. + * + * It returns the @nbytges passing in from debugfs user space when successful. + * In case of error conditions, it returns proper error code back to the user + * space. + **/ +static ssize_t +lpfc_idiag_queacc_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t qidx, quetp, queid, index, count, offset, value; + uint32_t *pentry; + struct lpfc_queue *pque; + int rc; + + /* This is a user write operation */ + debug->op = LPFC_IDIAG_OP_WR; + + rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); + if (rc < 0) + return rc; + + /* Get and sanity check on command feilds */ + quetp = idiag.cmd.data[0]; + queid = idiag.cmd.data[1]; + index = idiag.cmd.data[2]; + count = idiag.cmd.data[3]; + offset = idiag.cmd.data[4]; + value = idiag.cmd.data[5]; + + /* Sanity check on command line arguments */ + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) { + if (rc != LPFC_QUE_ACC_WR_CMD_ARG) + goto error_out; + if (count != 1) + goto error_out; + } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) { + if (rc != LPFC_QUE_ACC_RD_CMD_ARG) + goto error_out; + } else + goto error_out; + + switch (quetp) { + case LPFC_IDIAG_EQ: + /* Slow-path event queue */ + if (phba->sli4_hba.sp_eq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.sp_eq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.sp_eq; + goto pass_check; + } + /* Fast-path event queue */ + for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) { + if (phba->sli4_hba.fp_eq[qidx]->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.fp_eq[qidx], + index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.fp_eq[qidx]; + goto pass_check; + } + } + goto error_out; + break; + case LPFC_IDIAG_CQ: + /* MBX complete queue */ + if (phba->sli4_hba.mbx_cq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.mbx_cq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.mbx_cq; + goto pass_check; + } + /* ELS complete queue */ + if (phba->sli4_hba.els_cq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.els_cq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.els_cq; + goto pass_check; + } + /* FCP complete queue */ + for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) { + if (phba->sli4_hba.fcp_cq[qidx]->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.fcp_cq[qidx], + index, count); + if (rc) + goto error_out; + idiag.ptr_private = + phba->sli4_hba.fcp_cq[qidx]; + goto pass_check; + } + } + goto error_out; + break; + case LPFC_IDIAG_MQ: + /* MBX work queue */ + if (phba->sli4_hba.mbx_wq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.mbx_wq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.mbx_wq; + goto pass_check; + } + break; + case LPFC_IDIAG_WQ: + /* ELS work queue */ + if (phba->sli4_hba.els_wq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.els_wq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.els_wq; + goto pass_check; + } + /* FCP work queue */ + for (qidx = 0; qidx < phba->cfg_fcp_wq_count; qidx++) { + if (phba->sli4_hba.fcp_wq[qidx]->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.fcp_wq[qidx], + index, count); + if (rc) + goto error_out; + idiag.ptr_private = + phba->sli4_hba.fcp_wq[qidx]; + goto pass_check; + } + } + goto error_out; + break; + case LPFC_IDIAG_RQ: + /* HDR queue */ + if (phba->sli4_hba.hdr_rq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.hdr_rq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.hdr_rq; + goto pass_check; + } + /* DAT queue */ + if (phba->sli4_hba.dat_rq->queue_id == queid) { + /* Sanity check */ + rc = lpfc_idiag_que_param_check( + phba->sli4_hba.dat_rq, index, count); + if (rc) + goto error_out; + idiag.ptr_private = phba->sli4_hba.dat_rq; + goto pass_check; + } + goto error_out; + break; + default: + goto error_out; + break; + } + +pass_check: + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) { + if (count == LPFC_QUE_ACC_BROWSE) + idiag.offset.last_rd = index; + } + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) { + /* Additional sanity checks on write operation */ + pque = (struct lpfc_queue *)idiag.ptr_private; + if (offset > pque->entry_size/sizeof(uint32_t) - 1) + goto error_out; + pentry = pque->qe[index].address; + pentry += offset; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR) + *pentry = value; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST) + *pentry |= value; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) + *pentry &= ~value; + } + return nbytes; + +error_out: + /* Clean out command structure on command error out */ + memset(&idiag, 0, sizeof(idiag)); + return -EINVAL; +} + +/** + * lpfc_idiag_drbacc_read_reg - idiag debugfs read a doorbell register + * @phba: The pointer to hba structure. + * @pbuffer: The pointer to the buffer to copy the data to. + * @len: The lenght of bytes to copied. + * @drbregid: The id to doorbell registers. + * + * Description: + * This routine reads a doorbell register and copies its content to the + * user buffer pointed to by @pbuffer. + * + * Returns: + * This function returns the amount of data that was copied into @pbuffer. + **/ +static int +lpfc_idiag_drbacc_read_reg(struct lpfc_hba *phba, char *pbuffer, + int len, uint32_t drbregid) +{ + + if (!pbuffer) + return 0; + + switch (drbregid) { + case LPFC_DRB_EQCQ: + len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len, + "EQCQ-DRB-REG: 0x%08x\n", + readl(phba->sli4_hba.EQCQDBregaddr)); + break; + case LPFC_DRB_MQ: + len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len, + "MQ-DRB-REG: 0x%08x\n", + readl(phba->sli4_hba.MQDBregaddr)); + break; + case LPFC_DRB_WQ: + len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len, + "WQ-DRB-REG: 0x%08x\n", + readl(phba->sli4_hba.WQDBregaddr)); + break; + case LPFC_DRB_RQ: + len += snprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len, + "RQ-DRB-REG: 0x%08x\n", + readl(phba->sli4_hba.RQDBregaddr)); + break; + default: + break; + } + + return len; +} + +/** + * lpfc_idiag_drbacc_read - idiag debugfs read port doorbell + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba device doorbell register according + * to the idiag command, and copies to user @buf. Depending on the doorbell + * register read command setup, it does either a single doorbell register + * read or dump all doorbell registers. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_drbacc_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t drb_reg_id, i; + char *pbuffer; + int len = 0; + + /* This is a user read operation */ + debug->op = LPFC_IDIAG_OP_RD; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_DRB_ACC_BUF_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + + if (*ppos) + return 0; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD) + drb_reg_id = idiag.cmd.data[0]; + else + return 0; + + if (drb_reg_id == LPFC_DRB_ACC_ALL) + for (i = 1; i <= LPFC_DRB_MAX; i++) + len = lpfc_idiag_drbacc_read_reg(phba, + pbuffer, len, i); + else + len = lpfc_idiag_drbacc_read_reg(phba, + pbuffer, len, drb_reg_id); + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +/** + * lpfc_idiag_drbacc_write - Syntax check and set up idiag drbacc commands + * @file: The file pointer to read from. + * @buf: The buffer to copy the user data from. + * @nbytes: The number of bytes to get. + * @ppos: The position in the file to start reading from. + * + * This routine get the debugfs idiag command struct from user space and then + * perform the syntax check for port doorbell register read (dump) or write + * (set) command accordingly. In the case of port queue read command, it sets + * up the command in the idiag command struct for the following debugfs read + * operation. In the case of port doorbell register write operation, it + * executes the write operation into the port doorbell register accordingly. + * + * It returns the @nbytges passing in from debugfs user space when successful. + * In case of error conditions, it returns proper error code back to the user + * space. + **/ +static ssize_t +lpfc_idiag_drbacc_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t drb_reg_id, value, reg_val; + void __iomem *drb_reg; + int rc; + + /* This is a user write operation */ + debug->op = LPFC_IDIAG_OP_WR; + + rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); + if (rc < 0) + return rc; + + /* Sanity check on command line arguments */ + drb_reg_id = idiag.cmd.data[0]; + value = idiag.cmd.data[1]; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) { + if (rc != LPFC_DRB_ACC_WR_CMD_ARG) + goto error_out; + if (drb_reg_id > LPFC_DRB_MAX) + goto error_out; + } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD) { + if (rc != LPFC_DRB_ACC_RD_CMD_ARG) + goto error_out; + if ((drb_reg_id > LPFC_DRB_MAX) && + (drb_reg_id != LPFC_DRB_ACC_ALL)) + goto error_out; + } else + goto error_out; + + /* Perform the write access operation */ + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) { + switch (drb_reg_id) { + case LPFC_DRB_EQCQ: + drb_reg = phba->sli4_hba.EQCQDBregaddr; + break; + case LPFC_DRB_MQ: + drb_reg = phba->sli4_hba.MQDBregaddr; + break; + case LPFC_DRB_WQ: + drb_reg = phba->sli4_hba.WQDBregaddr; + break; + case LPFC_DRB_RQ: + drb_reg = phba->sli4_hba.RQDBregaddr; + break; + default: + goto error_out; + } + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR) + reg_val = value; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST) { + reg_val = readl(drb_reg); + reg_val |= value; + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) { + reg_val = readl(drb_reg); + reg_val &= ~value; + } + writel(reg_val, drb_reg); + readl(drb_reg); /* flush */ + } + return nbytes; + +error_out: + /* Clean out command structure on command error out */ + memset(&idiag, 0, sizeof(idiag)); + return -EINVAL; +} + #undef lpfc_debugfs_op_disc_trc static const struct file_operations lpfc_debugfs_op_disc_trc = { .owner = THIS_MODULE, @@ -1986,6 +2425,26 @@ static const struct file_operations lpfc_idiag_op_queInfo = { .release = lpfc_idiag_release, }; +#undef lpfc_idiag_op_queacc +static const struct file_operations lpfc_idiag_op_queAcc = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_idiag_queacc_read, + .write = lpfc_idiag_queacc_write, + .release = lpfc_idiag_cmd_release, +}; + +#undef lpfc_idiag_op_drbacc +static const struct file_operations lpfc_idiag_op_drbAcc = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_idiag_drbacc_read, + .write = lpfc_idiag_drbacc_write, + .release = lpfc_idiag_cmd_release, +}; + #endif /** @@ -2261,6 +2720,32 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) } } + /* iDiag access PCI function queue */ + snprintf(name, sizeof(name), "queAcc"); + if (!phba->idiag_que_acc) { + phba->idiag_que_acc = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->idiag_root, phba, &lpfc_idiag_op_queAcc); + if (!phba->idiag_que_acc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2926 Can't create idiag debugfs\n"); + goto debug_failed; + } + } + + /* iDiag access PCI function doorbell registers */ + snprintf(name, sizeof(name), "drbAcc"); + if (!phba->idiag_drb_acc) { + phba->idiag_drb_acc = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->idiag_root, phba, &lpfc_idiag_op_drbAcc); + if (!phba->idiag_drb_acc) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2927 Can't create idiag debugfs\n"); + goto debug_failed; + } + } + debug_failed: return; #endif @@ -2339,6 +2824,16 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport) * iDiag release */ if (phba->sli_rev == LPFC_SLI_REV4) { + if (phba->idiag_drb_acc) { + /* iDiag drbAcc */ + debugfs_remove(phba->idiag_drb_acc); + phba->idiag_drb_acc = NULL; + } + if (phba->idiag_que_acc) { + /* iDiag queAcc */ + debugfs_remove(phba->idiag_que_acc); + phba->idiag_que_acc = NULL; + } if (phba->idiag_que_info) { /* iDiag queInfo */ debugfs_remove(phba->idiag_que_info); diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h index 91b9a9427cda..6525a5e62d27 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.h +++ b/drivers/scsi/lpfc/lpfc_debugfs.h @@ -39,13 +39,42 @@ /* hbqinfo output buffer size */ #define LPFC_HBQINFO_SIZE 8192 -/* rdPciConf output buffer size */ +/* pciConf */ +#define LPFC_PCI_CFG_BROWSE 0xffff +#define LPFC_PCI_CFG_RD_CMD_ARG 2 +#define LPFC_PCI_CFG_WR_CMD_ARG 3 #define LPFC_PCI_CFG_SIZE 4096 #define LPFC_PCI_CFG_RD_BUF_SIZE (LPFC_PCI_CFG_SIZE/2) #define LPFC_PCI_CFG_RD_SIZE (LPFC_PCI_CFG_SIZE/4) -/* queue info output buffer size */ -#define LPFC_QUE_INFO_GET_BUF_SIZE 2048 +/* queue info */ +#define LPFC_QUE_INFO_GET_BUF_SIZE 4096 + +/* queue acc */ +#define LPFC_QUE_ACC_BROWSE 0xffff +#define LPFC_QUE_ACC_RD_CMD_ARG 4 +#define LPFC_QUE_ACC_WR_CMD_ARG 6 +#define LPFC_QUE_ACC_BUF_SIZE 4096 +#define LPFC_QUE_ACC_SIZE (LPFC_QUE_ACC_BUF_SIZE/2) + +#define LPFC_IDIAG_EQ 1 +#define LPFC_IDIAG_CQ 2 +#define LPFC_IDIAG_MQ 3 +#define LPFC_IDIAG_WQ 4 +#define LPFC_IDIAG_RQ 5 + +/* doorbell acc */ +#define LPFC_DRB_ACC_ALL 0xffff +#define LPFC_DRB_ACC_RD_CMD_ARG 1 +#define LPFC_DRB_ACC_WR_CMD_ARG 2 +#define LPFC_DRB_ACC_BUF_SIZE 256 + +#define LPFC_DRB_EQCQ 1 +#define LPFC_DRB_MQ 2 +#define LPFC_DRB_WQ 3 +#define LPFC_DRB_RQ 4 + +#define LPFC_DRB_MAX 4 #define SIZE_U8 sizeof(uint8_t) #define SIZE_U16 sizeof(uint16_t) @@ -73,13 +102,23 @@ struct lpfc_idiag_offset { uint32_t last_rd; }; -#define LPFC_IDIAG_CMD_DATA_SIZE 4 +#define LPFC_IDIAG_CMD_DATA_SIZE 8 struct lpfc_idiag_cmd { uint32_t opcode; #define LPFC_IDIAG_CMD_PCICFG_RD 0x00000001 #define LPFC_IDIAG_CMD_PCICFG_WR 0x00000002 #define LPFC_IDIAG_CMD_PCICFG_ST 0x00000003 #define LPFC_IDIAG_CMD_PCICFG_CL 0x00000004 + +#define LPFC_IDIAG_CMD_QUEACC_RD 0x00000011 +#define LPFC_IDIAG_CMD_QUEACC_WR 0x00000012 +#define LPFC_IDIAG_CMD_QUEACC_ST 0x00000013 +#define LPFC_IDIAG_CMD_QUEACC_CL 0x00000014 + +#define LPFC_IDIAG_CMD_DRBACC_RD 0x00000021 +#define LPFC_IDIAG_CMD_DRBACC_WR 0x00000022 +#define LPFC_IDIAG_CMD_DRBACC_ST 0x00000023 +#define LPFC_IDIAG_CMD_DRBACC_CL 0x00000024 uint32_t data[LPFC_IDIAG_CMD_DATA_SIZE]; }; @@ -87,6 +126,7 @@ struct lpfc_idiag { uint32_t active; struct lpfc_idiag_cmd cmd; struct lpfc_idiag_offset offset; + void *ptr_private; }; #endif |
