summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/usb/ehci-orion.txt4
-rw-r--r--drivers/usb/host/ehci-orion.c36
2 files changed, 39 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/usb/ehci-orion.txt b/Documentation/devicetree/bindings/usb/ehci-orion.txt
index 17c3bc858b86..2855bae79fda 100644
--- a/Documentation/devicetree/bindings/usb/ehci-orion.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-orion.txt
@@ -1,7 +1,9 @@
* EHCI controller, Orion Marvell variants
Required properties:
-- compatible: must be "marvell,orion-ehci"
+- compatible: must be one of the following
+ "marvell,orion-ehci"
+ "marvell,armada-3700-ehci"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: The EHCI interrupt
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index ee8d5faa0194..1aec87ec68df 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -47,6 +47,18 @@
#define USB_PHY_IVREF_CTRL 0x440
#define USB_PHY_TST_GRP_CTRL 0x450
+#define USB_SBUSCFG 0x90
+
+/* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */
+#define USB_SBUSCFG_BAWR_ALIGN_128B (0x3 << 6)
+#define USB_SBUSCFG_BARD_ALIGN_128B (0x3 << 3)
+/* AHBBRST = 3 : Align AHB Burst to INCR16 (64 bytes) */
+#define USB_SBUSCFG_AHBBRST_INCR16 (0x3 << 0)
+
+#define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B \
+ | USB_SBUSCFG_BARD_ALIGN_128B \
+ | USB_SBUSCFG_AHBBRST_INCR16)
+
#define DRIVER_DESC "EHCI orion driver"
#define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
@@ -151,8 +163,31 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
}
}
+static int ehci_orion_drv_reset(struct usb_hcd *hcd)
+{
+ struct device *dev = hcd->self.controller;
+ int ret;
+
+ ret = ehci_setup(hcd);
+ if (ret)
+ return ret;
+
+ /*
+ * For SoC without hlock, need to program sbuscfg value to guarantee
+ * AHB master's burst would not overrun or underrun FIFO.
+ *
+ * sbuscfg reg has to be set after usb controller reset, otherwise
+ * the value would be override to 0.
+ */
+ if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci"))
+ wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL);
+
+ return ret;
+}
+
static const struct ehci_driver_overrides orion_overrides __initconst = {
.extra_priv_size = sizeof(struct orion_ehci_hcd),
+ .reset = ehci_orion_drv_reset,
};
static int ehci_orion_drv_probe(struct platform_device *pdev)
@@ -310,6 +345,7 @@ static int ehci_orion_drv_remove(struct platform_device *pdev)
static const struct of_device_id ehci_orion_dt_ids[] = {
{ .compatible = "marvell,orion-ehci", },
+ { .compatible = "marvell,armada-3700-ehci", },
{},
};
MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
OpenPOWER on IntegriCloud