summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-ux500/board-mop500-stuib.c71
-rw-r--r--drivers/input/touchscreen/bu21013_ts.c69
-rw-r--r--include/linux/input/bu21013.h10
3 files changed, 53 insertions, 97 deletions
diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
index 564f57d5d8a7..7e1f294f0434 100644
--- a/arch/arm/mach-ux500/board-mop500-stuib.c
+++ b/arch/arm/mach-ux500/board-mop500-stuib.c
@@ -77,9 +77,6 @@ static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
* BU21013 ROHM touchscreen interface on the STUIBs
*/
-/* tracks number of bu21013 devices being enabled */
-static int bu21013_devices;
-
#define TOUCH_GPIO_PIN 84
#define TOUCH_XMAX 384
@@ -88,73 +85,8 @@ static int bu21013_devices;
#define PRCMU_CLOCK_OCR 0x1CC
#define TSC_EXT_CLOCK_9_6MHZ 0x840000
-/**
- * bu21013_gpio_board_init : configures the touch panel.
- * @reset_pin: reset pin number
- * This function can be used to configures
- * the voltage and reset the touch panel controller.
- */
-static int bu21013_gpio_board_init(int reset_pin)
-{
- int retval = 0;
-
- bu21013_devices++;
- if (bu21013_devices == 1) {
- retval = gpio_request(reset_pin, "touchp_reset");
- if (retval) {
- printk(KERN_ERR "Unable to request gpio reset_pin");
- return retval;
- }
- retval = gpio_direction_output(reset_pin, 1);
- if (retval < 0) {
- printk(KERN_ERR "%s: gpio direction failed\n",
- __func__);
- return retval;
- }
- }
-
- return retval;
-}
-
-/**
- * bu21013_gpio_board_exit : deconfigures the touch panel controller
- * @reset_pin: reset pin number
- * This function can be used to deconfigures the chip selection
- * for touch panel controller.
- */
-static int bu21013_gpio_board_exit(int reset_pin)
-{
- int retval = 0;
-
- if (bu21013_devices == 1) {
- retval = gpio_direction_output(reset_pin, 0);
- if (retval < 0) {
- printk(KERN_ERR "%s: gpio direction failed\n",
- __func__);
- return retval;
- }
- gpio_set_value(reset_pin, 0);
- }
- bu21013_devices--;
-
- return retval;
-}
-
-/**
- * bu21013_read_pin_val : get the interrupt pin value
- * This function can be used to get the interrupt pin value for touch panel
- * controller.
- */
-static int bu21013_read_pin_val(void)
-{
- return gpio_get_value(TOUCH_GPIO_PIN);
-}
-
static struct bu21013_platform_device tsc_plat_device = {
- .cs_en = bu21013_gpio_board_init,
- .cs_dis = bu21013_gpio_board_exit,
- .irq_read_val = bu21013_read_pin_val,
- .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
+ .touch_pin = TOUCH_GPIO_PIN,
.touch_x_max = TOUCH_XMAX,
.touch_y_max = TOUCH_YMAX,
.ext_clk = false,
@@ -171,7 +103,6 @@ static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
I2C_BOARD_INFO("bu21013_tp", 0x5D),
.platform_data = &tsc_plat_device,
},
-
};
void __init mop500_stuib_init(void)
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index 1e8cddd06c60..c6f6a04ec673 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
+#include <linux/gpio.h>
#define PEN_DOWN_INTR 0
#define MAX_FINGERS 2
@@ -148,11 +149,12 @@
struct bu21013_ts_data {
struct i2c_client *client;
wait_queue_head_t wait;
- bool touch_stopped;
const struct bu21013_platform_device *chip;
struct input_dev *in_dev;
- unsigned int intr_pin;
struct regulator *regulator;
+ unsigned int irq;
+ unsigned int intr_pin;
+ bool touch_stopped;
};
/**
@@ -262,7 +264,7 @@ static irqreturn_t bu21013_gpio_irq(int irq, void *device_data)
return IRQ_NONE;
}
- data->intr_pin = data->chip->irq_read_val();
+ data->intr_pin = gpio_get_value(data->chip->touch_pin);
if (data->intr_pin == PEN_DOWN_INTR)
wait_event_timeout(data->wait, data->touch_stopped,
msecs_to_jiffies(2));
@@ -418,10 +420,33 @@ static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data)
{
bu21013_data->touch_stopped = true;
wake_up(&bu21013_data->wait);
- free_irq(bu21013_data->chip->irq, bu21013_data);
+ free_irq(bu21013_data->irq, bu21013_data);
}
/**
+ * bu21013_cs_disable() - deconfigures the touch panel controller
+ * @bu21013_data: device structure pointer
+ *
+ * This function is used to deconfigure the chip selection
+ * for touch panel controller.
+ */
+static void bu21013_cs_disable(struct bu21013_ts_data *bu21013_data)
+{
+ int error;
+
+ error = gpio_direction_output(bu21013_data->chip->cs_pin, 0);
+ if (error < 0)
+ dev_warn(&bu21013_data->client->dev,
+ "%s: gpio direction failed, error: %d\n",
+ __func__, error);
+ else
+ gpio_set_value(bu21013_data->chip->cs_pin, 0);
+
+ gpio_free(bu21013_data->chip->cs_pin);
+}
+
+
+/**
* bu21013_probe() - initializes the i2c-client touchscreen driver
* @client: i2c client structure pointer
* @id: i2c device id pointer
@@ -430,7 +455,7 @@ static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data)
* driver and returns integer.
*/
static int bu21013_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *id)
{
struct bu21013_ts_data *bu21013_data;
struct input_dev *in_dev;
@@ -449,6 +474,11 @@ static int bu21013_probe(struct i2c_client *client,
return -EINVAL;
}
+ if (!gpio_is_valid(pdata->touch_pin)) {
+ dev_err(&client->dev, "invalid touch_pin supplied\n");
+ return -EINVAL;
+ }
+
bu21013_data = kzalloc(sizeof(struct bu21013_ts_data), GFP_KERNEL);
in_dev = input_allocate_device();
if (!bu21013_data || !in_dev) {
@@ -460,6 +490,7 @@ static int bu21013_probe(struct i2c_client *client,
bu21013_data->in_dev = in_dev;
bu21013_data->chip = pdata;
bu21013_data->client = client;
+ bu21013_data->irq = gpio_to_irq(pdata->touch_pin);
bu21013_data->regulator = regulator_get(&client->dev, "avdd");
if (IS_ERR(bu21013_data->regulator)) {
@@ -478,12 +509,11 @@ static int bu21013_probe(struct i2c_client *client,
init_waitqueue_head(&bu21013_data->wait);
/* configure the gpio pins */
- if (pdata->cs_en) {
- error = pdata->cs_en(pdata->cs_pin);
- if (error < 0) {
- dev_err(&client->dev, "chip init failed\n");
- goto err_disable_regulator;
- }
+ error = gpio_request_one(pdata->cs_pin, GPIOF_OUT_INIT_HIGH,
+ "touchp_reset");
+ if (error < 0) {
+ dev_err(&client->dev, "Unable to request gpio reset_pin\n");
+ goto err_disable_regulator;
}
/* configure the touch panel controller */
@@ -508,12 +538,13 @@ static int bu21013_probe(struct i2c_client *client,
pdata->touch_y_max, 0, 0);
input_set_drvdata(in_dev, bu21013_data);
- error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq,
+ error = request_threaded_irq(bu21013_data->irq, NULL, bu21013_gpio_irq,
IRQF_TRIGGER_FALLING | IRQF_SHARED |
IRQF_ONESHOT,
DRIVER_TP, bu21013_data);
if (error) {
- dev_err(&client->dev, "request irq %d failed\n", pdata->irq);
+ dev_err(&client->dev, "request irq %d failed\n",
+ bu21013_data->irq);
goto err_cs_disable;
}
@@ -531,7 +562,7 @@ static int bu21013_probe(struct i2c_client *client,
err_free_irq:
bu21013_free_irq(bu21013_data);
err_cs_disable:
- pdata->cs_dis(pdata->cs_pin);
+ bu21013_cs_disable(bu21013_data);
err_disable_regulator:
regulator_disable(bu21013_data->regulator);
err_put_regulator:
@@ -555,7 +586,7 @@ static int bu21013_remove(struct i2c_client *client)
bu21013_free_irq(bu21013_data);
- bu21013_data->chip->cs_dis(bu21013_data->chip->cs_pin);
+ bu21013_cs_disable(bu21013_data);
input_unregister_device(bu21013_data->in_dev);
@@ -584,9 +615,9 @@ static int bu21013_suspend(struct device *dev)
bu21013_data->touch_stopped = true;
if (device_may_wakeup(&client->dev))
- enable_irq_wake(bu21013_data->chip->irq);
+ enable_irq_wake(bu21013_data->irq);
else
- disable_irq(bu21013_data->chip->irq);
+ disable_irq(bu21013_data->irq);
regulator_disable(bu21013_data->regulator);
@@ -621,9 +652,9 @@ static int bu21013_resume(struct device *dev)
bu21013_data->touch_stopped = false;
if (device_may_wakeup(&client->dev))
- disable_irq_wake(bu21013_data->chip->irq);
+ disable_irq_wake(bu21013_data->irq);
else
- enable_irq(bu21013_data->chip->irq);
+ enable_irq(bu21013_data->irq);
return 0;
}
diff --git a/include/linux/input/bu21013.h b/include/linux/input/bu21013.h
index 05e03284b92a..6230d76bde5d 100644
--- a/include/linux/input/bu21013.h
+++ b/include/linux/input/bu21013.h
@@ -9,13 +9,10 @@
/**
* struct bu21013_platform_device - Handle the platform data
- * @cs_en: pointer to the cs enable function
- * @cs_dis: pointer to the cs disable function
- * @irq_read_val: pointer to read the pen irq value function
* @touch_x_max: touch x max
* @touch_y_max: touch y max
* @cs_pin: chip select pin
- * @irq: irq pin
+ * @touch_pin: touch gpio pin
* @ext_clk: external clock flag
* @x_flip: x flip flag
* @y_flip: y flip flag
@@ -24,13 +21,10 @@
* This is used to handle the platform data
*/
struct bu21013_platform_device {
- int (*cs_en)(int reset_pin);
- int (*cs_dis)(int reset_pin);
- int (*irq_read_val)(void);
int touch_x_max;
int touch_y_max;
unsigned int cs_pin;
- unsigned int irq;
+ unsigned int touch_pin;
bool ext_clk;
bool x_flip;
bool y_flip;
OpenPOWER on IntegriCloud