summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/mfd/88pm860x.txt85
-rw-r--r--Documentation/devicetree/bindings/regulator/88pm860x.txt30
-rw-r--r--Documentation/devicetree/bindings/video/backlight/88pm860x.txt15
-rw-r--r--drivers/input/touchscreen/88pm860x-ts.c46
-rw-r--r--drivers/leds/leds-88pm860x.c33
-rw-r--r--drivers/mfd/88pm860x-core.c62
-rw-r--r--drivers/regulator/88pm8607.c35
-rw-r--r--drivers/rtc/rtc-88pm860x.c43
-rw-r--r--drivers/video/backlight/88pm860x_bl.c39
-rw-r--r--include/linux/mfd/88pm860x.h4
10 files changed, 351 insertions, 41 deletions
diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt
new file mode 100644
index 000000000000..63f3ee33759c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/88pm860x.txt
@@ -0,0 +1,85 @@
+* Marvell 88PM860x Power Management IC
+
+Required parent device properties:
+- compatible : "marvell,88pm860x"
+- reg : the I2C slave address for the 88pm860x chip
+- interrupts : IRQ line for the 88pm860x chip
+- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain)
+- #interrupt-cells : should be 1.
+ - The cell is the 88pm860x local IRQ number
+
+Optional parent device properties:
+- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read
+- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address
+ of one chip, and this property stores the I2C address of
+ another chip.
+
+88pm860x consists of a large and varied group of sub-devices:
+
+Device Supply Names Description
+------ ------------ -----------
+88pm860x-onkey : : On key
+88pm860x-rtc : : RTC
+88pm8607 : : Regulators
+88pm860x-backlight : : Backlight
+88pm860x-led : : Led
+88pm860x-touch : : Touchscreen
+
+Example:
+
+ pmic: 88pm860x@34 {
+ compatible = "marvell,88pm860x";
+ reg = <0x34>;
+ interrupts = <4>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ marvell,88pm860x-irq-read-clr;
+ marvell,88pm860x-slave-addr = <0x11>;
+
+ regulators {
+ BUCK1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ rtc {
+ marvell,88pm860x-vrtc = <1>;
+ };
+ touch {
+ marvell,88pm860x-gpadc-prebias = <1>;
+ marvell,88pm860x-gpadc-slot-cycle = <1>;
+ marvell,88pm860x-tsi-prebias = <6>;
+ marvell,88pm860x-pen-prebias = <16>;
+ marvell,88pm860x-pen-prechg = <2>;
+ marvell,88pm860x-resistor-X = <300>;
+ };
+ backlights {
+ backlight-0 {
+ marvell,88pm860x-iset = <4>;
+ marvell,88pm860x-pwm = <3>;
+ };
+ backlight-2 {
+ };
+ };
+ leds {
+ led0-red {
+ marvell,88pm860x-iset = <12>;
+ };
+ led0-green {
+ marvell,88pm860x-iset = <12>;
+ };
+ led0-blue {
+ marvell,88pm860x-iset = <12>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt
new file mode 100644
index 000000000000..1267b3e1a2cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt
@@ -0,0 +1,30 @@
+Marvell 88PM860x regulator
+
+Required properties:
+- compatible: "marvell,88pm860x"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the regulator-compatible
+ property, with valid values listed below.
+
+Example:
+
+ pmic: 88pm860x@34 {
+ compatible = "marvell,88pm860x";
+ reg = <0x34>;
+
+ regulators {
+ BUCK1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ BUCK3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/video/backlight/88pm860x.txt b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt
new file mode 100644
index 000000000000..261df2799315
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt
@@ -0,0 +1,15 @@
+88pm860x-backlight bindings
+
+Optional properties:
+ - marvell,88pm860x-iset: Current supplies on backlight device.
+ - marvell,88pm860x-pwm: PWM frequency on backlight device.
+
+Example:
+
+ backlights {
+ backlight-0 {
+ marvell,88pm860x-iset = <4>;
+ marvell,88pm860x-pwm = <3>;
+ };
+ backlight-2 {
+ };
diff --git a/drivers/input/touchscreen/88pm860x-ts.c b/drivers/input/touchscreen/88pm860x-ts.c
index 05f30b73c3c3..4f81e6eb74b6 100644
--- a/drivers/input/touchscreen/88pm860x-ts.c
+++ b/drivers/input/touchscreen/88pm860x-ts.c
@@ -10,6 +10,7 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/input.h>
@@ -113,14 +114,31 @@ static void pm860x_touch_close(struct input_dev *dev)
pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0);
}
+#ifdef CONFIG_OF
+static int __devinit pm860x_touch_dt_init(struct platform_device *pdev,
+ int *res_x)
+{
+ struct device_node *np = pdev->dev.parent->of_node;
+ if (!np)
+ return -ENODEV;
+ np = of_find_node_by_name(np, "touch");
+ if (!np) {
+ dev_err(&pdev->dev, "Can't find touch node\n");
+ return -EINVAL;
+ }
+ of_property_read_u32(np, "marvell,88pm860x-resistor-X", res_x);
+ return 0;
+}
+#else
+#define pm860x_touch_dt_init(x, y) (-1)
+#endif
+
static int __devinit pm860x_touch_probe(struct platform_device *pdev)
{
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
- struct pm860x_platform_data *pm860x_pdata = \
- pdev->dev.parent->platform_data;
- struct pm860x_touch_pdata *pdata = NULL;
+ struct pm860x_touch_pdata *pdata = pdev->dev.platform_data;
struct pm860x_touch *touch;
- int irq, ret;
+ int irq, ret, res_x = 0;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -128,15 +146,13 @@ static int __devinit pm860x_touch_probe(struct platform_device *pdev)
return -EINVAL;
}
- if (!pm860x_pdata) {
- dev_err(&pdev->dev, "platform data is missing\n");
- return -EINVAL;
- }
-
- pdata = pm860x_pdata->touch;
- if (!pdata) {
- dev_err(&pdev->dev, "touchscreen data is missing\n");
- return -EINVAL;
+ if (pm860x_touch_dt_init(pdev, &res_x)) {
+ if (pdata)
+ res_x = pdata->res_x;
+ else {
+ dev_err(&pdev->dev, "failed to get platform data\n");
+ return -EINVAL;
+ }
}
touch = kzalloc(sizeof(struct pm860x_touch), GFP_KERNEL);
@@ -159,8 +175,8 @@ static int __devinit pm860x_touch_probe(struct platform_device *pdev)
touch->idev->close = pm860x_touch_close;
touch->chip = chip;
touch->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
- touch->irq = irq + chip->irq_base;
- touch->res_x = pdata->res_x;
+ touch->irq = irq;
+ touch->res_x = res_x;
input_set_drvdata(touch->idev, touch);
ret = request_threaded_irq(touch->irq, NULL, pm860x_touch_handler,
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 70232b1756f9..b7e8cc0957fc 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/leds.h>
@@ -123,6 +124,33 @@ static void pm860x_led_set(struct led_classdev *cdev,
schedule_work(&data->work);
}
+#ifdef CONFIG_OF
+static int pm860x_led_dt_init(struct platform_device *pdev,
+ struct pm860x_led *data)
+{
+ struct device_node *nproot = pdev->dev.parent->of_node, *np;
+ int iset = 0;
+ if (!nproot)
+ return -ENODEV;
+ nproot = of_find_node_by_name(nproot, "leds");
+ if (!nproot) {
+ dev_err(&pdev->dev, "failed to find leds node\n");
+ return -ENODEV;
+ }
+ for_each_child_of_node(nproot, np) {
+ if (!of_node_cmp(np->name, data->name)) {
+ of_property_read_u32(np, "marvell,88pm860x-iset",
+ &iset);
+ data->iset = PM8606_LED_CURRENT(iset);
+ break;
+ }
+ }
+ return 0;
+}
+#else
+#define pm860x_led_dt_init(x, y) (-1)
+#endif
+
static int pm860x_led_probe(struct platform_device *pdev)
{
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -179,8 +207,9 @@ static int pm860x_led_probe(struct platform_device *pdev)
data->chip = chip;
data->i2c = (chip->id == CHIP_PM8606) ? chip->client : chip->companion;
data->port = pdev->id;
- if (pdata && pdata->iset)
- data->iset = pdata->iset;
+ if (pm860x_led_dt_init(pdev, data))
+ if (pdata)
+ data->iset = pdata->iset;
data->current_brightness = 0;
data->cdev.name = data->name;
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 5b56fe8250b4..fdaf6861ce95 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -16,6 +16,8 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -1112,12 +1114,6 @@ static void __devexit pm860x_device_exit(struct pm860x_chip *chip)
mfd_remove_devices(chip->dev);
}
-static const struct i2c_device_id pm860x_id_table[] = {
- { "88PM860x", 0 },
- {}
-};
-MODULE_DEVICE_TABLE(i2c, pm860x_id_table);
-
static int verify_addr(struct i2c_client *i2c)
{
unsigned short addr_8607[] = {0x30, 0x34};
@@ -1144,21 +1140,52 @@ static struct regmap_config pm860x_regmap_config = {
.val_bits = 8,
};
+static int __devinit pm860x_dt_init(struct device_node *np,
+ struct device *dev,
+ struct pm860x_platform_data *pdata)
+{
+ int ret;
+
+ if (of_get_property(np, "marvell,88pm860x-irq-read-clr", NULL))
+ pdata->irq_mode = 1;
+ ret = of_property_read_u32(np, "marvell,88pm860x-slave-addr",
+ &pdata->companion_addr);
+ if (ret) {
+ dev_err(dev, "Not found \"marvell,88pm860x-slave-addr\" "
+ "property\n");
+ pdata->companion_addr = 0;
+ }
+ return 0;
+}
+
static int __devinit pm860x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct pm860x_platform_data *pdata = client->dev.platform_data;
+ struct device_node *node = client->dev.of_node;
struct pm860x_chip *chip;
int ret;
- if (!pdata) {
+ if (node && !pdata) {
+ /* parse DT to get platform data */
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(struct pm860x_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ ret = pm860x_dt_init(node, &client->dev, pdata);
+ if (ret)
+ goto err;
+ } else if (!pdata) {
pr_info("No platform data in %s!\n", __func__);
return -EINVAL;
}
chip = kzalloc(sizeof(struct pm860x_chip), GFP_KERNEL);
- if (chip == NULL)
- return -ENOMEM;
+ if (chip == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
chip->id = verify_addr(client);
chip->regmap = regmap_init_i2c(client, &pm860x_regmap_config);
@@ -1198,6 +1225,10 @@ static int __devinit pm860x_probe(struct i2c_client *client,
pm860x_device_init(chip, pdata);
return 0;
+err:
+ if (node)
+ devm_kfree(&client->dev, pdata);
+ return ret;
}
static int __devexit pm860x_remove(struct i2c_client *client)
@@ -1238,11 +1269,24 @@ static int pm860x_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(pm860x_pm_ops, pm860x_suspend, pm860x_resume);
+static const struct i2c_device_id pm860x_id_table[] = {
+ { "88PM860x", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, pm860x_id_table);
+
+static const struct of_device_id pm860x_dt_ids[] = {
+ { .compatible = "marvell,88pm860x", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pm860x_dt_ids);
+
static struct i2c_driver pm860x_driver = {
.driver = {
.name = "88PM860x",
.owner = THIS_MODULE,
.pm = &pm860x_pm_ops,
+ .of_match_table = of_match_ptr(pm860x_dt_ids),
},
.probe = pm860x_probe,
.remove = __devexit_p(pm860x_remove),
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index f96fbe38ff6f..1c5ab0172ea2 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -12,6 +12,8 @@
#include <linux/init.h>
#include <linux/err.h>
#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
@@ -364,6 +366,34 @@ static struct pm8607_regulator_info pm8606_regulator_info[] = {
PM8606_PREG(PREREGULATORB, 5),
};
+#ifdef CONFIG_OF
+static int pm8607_regulator_dt_init(struct platform_device *pdev,
+ struct pm8607_regulator_info *info,
+ struct regulator_config *config)
+{
+ struct device_node *nproot, *np;
+ nproot = pdev->dev.parent->of_node;
+ if (!nproot)
+ return -ENODEV;
+ nproot = of_find_node_by_name(nproot, "regulators");
+ if (!nproot) {
+ dev_err(&pdev->dev, "failed to find regulators node\n");
+ return -ENODEV;
+ }
+ for_each_child_of_node(nproot, np) {
+ if (!of_node_cmp(np->name, info->desc.name)) {
+ config->init_data =
+ of_get_regulator_init_data(&pdev->dev, np);
+ config->of_node = np;
+ break;
+ }
+ }
+ return 0;
+}
+#else
+#define pm8607_regulator_dt_init(x, y, z) (-1)
+#endif
+
static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
{
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -402,9 +432,12 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
info->slope_double = 1;
config.dev = &pdev->dev;
- config.init_data = pdata;
config.driver_data = info;
+ if (pm8607_regulator_dt_init(pdev, info, &config))
+ if (pdata)
+ config.init_data = pdata;
+
if (chip->id == CHIP_PM8607)
config.regmap = chip->regmap;
else
diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c
index feddefc42109..de9e854b326a 100644
--- a/drivers/rtc/rtc-88pm860x.c
+++ b/drivers/rtc/rtc-88pm860x.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mutex.h>
@@ -284,6 +285,28 @@ out:
}
#endif
+#ifdef CONFIG_OF
+static int __devinit pm860x_rtc_dt_init(struct platform_device *pdev,
+ struct pm860x_rtc_info *info)
+{
+ struct device_node *np = pdev->dev.parent->of_node;
+ int ret;
+ if (!np)
+ return -ENODEV;
+ np = of_find_node_by_name(np, "rtc");
+ if (!np) {
+ dev_err(&pdev->dev, "failed to find rtc node\n");
+ return -ENODEV;
+ }
+ ret = of_property_read_u32(np, "marvell,88pm860x-vrtc", &info->vrtc);
+ if (ret)
+ info->vrtc = 0;
+ return 0;
+}
+#else
+#define pm860x_rtc_dt_init(x, y) (-1)
+#endif
+
static int __devinit pm860x_rtc_probe(struct platform_device *pdev)
{
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -294,8 +317,6 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev)
int ret;
pdata = pdev->dev.platform_data;
- if (pdata == NULL)
- dev_warn(&pdev->dev, "No platform data!\n");
info = kzalloc(sizeof(struct pm860x_rtc_info), GFP_KERNEL);
if (!info)
@@ -345,9 +366,11 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev)
}
}
rtc_tm_to_time(&tm, &ticks);
- if (pdata && pdata->sync) {
- pdata->sync(ticks);
- info->sync = pdata->sync;
+ if (pm860x_rtc_dt_init(pdev, info)) {
+ if (pdata && pdata->sync) {
+ pdata->sync(ticks);
+ info->sync = pdata->sync;
+ }
}
info->rtc_dev = rtc_device_register("88pm860x-rtc", &pdev->dev,
@@ -366,10 +389,12 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev)
#ifdef VRTC_CALIBRATION
/* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */
- if (pdata && pdata->vrtc)
- info->vrtc = pdata->vrtc & 0x3;
- else
- info->vrtc = 1;
+ if (pm860x_rtc_dt_init(pdev, info)) {
+ if (pdata && pdata->vrtc)
+ info->vrtc = pdata->vrtc & 0x3;
+ else
+ info->vrtc = 1;
+ }
pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC);
/* calibrate VRTC */
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index 965161cacefa..b7ec34c57f46 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -11,6 +11,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/fb.h>
@@ -159,6 +160,36 @@ static const struct backlight_ops pm860x_backlight_ops = {
.get_brightness = pm860x_backlight_get_brightness,
};
+#ifdef CONFIG_OF
+static int pm860x_backlight_dt_init(struct platform_device *pdev,
+ struct pm860x_backlight_data *data,
+ char *name)
+{
+ struct device_node *nproot = pdev->dev.parent->of_node, *np;
+ int iset = 0;
+ if (!nproot)
+ return -ENODEV;
+ nproot = of_find_node_by_name(nproot, "backlights");
+ if (!nproot) {
+ dev_err(&pdev->dev, "failed to find backlights node\n");
+ return -ENODEV;
+ }
+ for_each_child_of_node(nproot, np) {
+ if (!of_node_cmp(np->name, name)) {
+ of_property_read_u32(np, "marvell,88pm860x-iset",
+ &iset);
+ data->iset = PM8606_WLED_CURRENT(iset);
+ of_property_read_u32(np, "marvell,88pm860x-pwm",
+ &data->pwm);
+ break;
+ }
+ }
+ return 0;
+}
+#else
+#define pm860x_backlight_dt_init(x, y, z) (-1)
+#endif
+
static int pm860x_backlight_probe(struct platform_device *pdev)
{
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -203,9 +234,11 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
data->i2c = (chip->id == CHIP_PM8606) ? chip->client \
: chip->companion;
data->current_brightness = MAX_BRIGHTNESS;
- if (pdata) {
- data->pwm = pdata->pwm;
- data->iset = pdata->iset;
+ if (pm860x_backlight_dt_init(pdev, data, name)) {
+ if (pdata) {
+ data->pwm = pdata->pwm;
+ data->iset = pdata->iset;
+ }
}
memset(&props, 0, sizeof(struct backlight_properties));
diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h
index d515e5c438f0..ef3e6b701179 100644
--- a/include/linux/mfd/88pm860x.h
+++ b/include/linux/mfd/88pm860x.h
@@ -306,7 +306,7 @@ struct pm860x_chip {
struct regmap *regmap_companion;
int buck3_double; /* DVC ramp slope double */
- unsigned short companion_addr;
+ int companion_addr;
unsigned short osc_vote;
int id;
int irq_mode;
@@ -376,7 +376,7 @@ struct pm860x_platform_data {
struct regulator_init_data *ldo_vibrator;
struct regulator_init_data *ldo14;
- unsigned short companion_addr; /* I2C address of companion chip */
+ int companion_addr; /* I2C address of companion chip */
int i2c_port; /* Controlled by GI2C or PI2C */
int irq_mode; /* Clear interrupt by read/write(0/1) */
int irq_base; /* IRQ base number of 88pm860x */
OpenPOWER on IntegriCloud