diff options
-rw-r--r-- | drivers/usb/dwc2/core.c | 61 | ||||
-rw-r--r-- | drivers/usb/dwc2/core.h | 6 | ||||
-rw-r--r-- | drivers/usb/dwc2/hcd.c | 6 | ||||
-rw-r--r-- | drivers/usb/dwc2/params.c | 12 | ||||
-rw-r--r-- | drivers/usb/dwc2/platform.c | 9 |
5 files changed, 29 insertions, 65 deletions
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 280ecddf82cb..cf1faf2443d0 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -541,14 +541,14 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait) return 0; } -/* - * Force the mode of the controller. +/** + * dwc2_force_mode() - Force the mode of the controller. * * Forcing the mode is needed for two cases: * * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the * controller to stay in a particular mode regardless of ID pin - * changes. We do this usually after a core reset. + * changes. We do this once during probe. * * 2) During probe we want to read reset values of the hw * configuration registers that are only available in either host or @@ -565,7 +565,7 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait) * the filter is configured and enabled. We poll the current mode of * the controller to account for this delay. */ -static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) +void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) { u32 gusbcfg; u32 set; @@ -577,17 +577,17 @@ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) * Force mode has no effect if the hardware is not OTG. */ if (!dwc2_hw_is_otg(hsotg)) - return false; + return; /* * If dr_mode is either peripheral or host only, there is no * need to ever force the mode to the opposite mode. */ if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)) - return false; + return; if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST)) - return false; + return; gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); @@ -599,7 +599,7 @@ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); dwc2_wait_for_mode(hsotg, host); - return true; + return; } /** @@ -615,6 +615,11 @@ void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) { u32 gusbcfg; + if (!dwc2_hw_is_otg(hsotg)) + return; + + dev_dbg(hsotg->dev, "Clearing force mode bits\n"); + gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; gusbcfg &= ~GUSBCFG_FORCEDEVMODE; @@ -629,16 +634,13 @@ void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) */ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg) { - bool ret; - switch (hsotg->dr_mode) { case USB_DR_MODE_HOST: - ret = dwc2_force_mode(hsotg, true); /* * NOTE: This is required for some rockchip soc based * platforms on their host-only dwc2. */ - if (!ret) + if (!dwc2_hw_is_otg(hsotg)) msleep(50); break; @@ -656,25 +658,6 @@ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg) } /* - * Do core a soft reset of the core. Be careful with this because it - * resets all the internal state machines of the core. - * - * Additionally this will apply force mode as per the hsotg->dr_mode - * parameter. - */ -int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg) -{ - int retval; - - retval = dwc2_core_reset(hsotg, false); - if (retval) - return retval; - - dwc2_force_dr_mode(hsotg); - return 0; -} - -/* * dwc2_enable_acg - enable active clock gating feature */ void dwc2_enable_acg(struct dwc2_hsotg *hsotg) @@ -910,22 +893,6 @@ void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg) udelay(1); } -/* - * Forces either host or device mode if the controller is not - * currently in that mode. - * - * Returns true if the mode was forced. - */ -bool dwc2_force_mode_if_needed(struct dwc2_hsotg *hsotg, bool host) -{ - if (host && dwc2_is_host_mode(hsotg)) - return false; - else if (!host && dwc2_is_device_mode(hsotg)) - return false; - - return dwc2_force_mode(hsotg, host); -} - bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg) { if (dwc2_readl(hsotg->regs + GSNPSID) == 0xffffffff) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index ca3c7030b38e..bef182993fa0 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -1131,15 +1131,13 @@ static inline bool dwc2_is_hs_iot(struct dwc2_hsotg *hsotg) * and the DWC_otg controller */ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait); -int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg); int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg); int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, bool restore); int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host); int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, - int reset, int is_host); + int reset, int is_host); -bool dwc2_force_mode_if_needed(struct dwc2_hsotg *hsotg, bool host); -void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg); +void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host); void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg); bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg); diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 66c074265dab..7341d5abe8e1 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -141,7 +141,7 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); /* Reset after a PHY select */ - retval = dwc2_core_reset_and_force_dr_mode(hsotg); + retval = dwc2_core_reset(hsotg, false); if (retval) { dev_err(hsotg->dev, @@ -239,7 +239,7 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); /* Reset after setting the PHY parameters */ - retval = dwc2_core_reset_and_force_dr_mode(hsotg); + retval = dwc2_core_reset(hsotg, false); if (retval) { dev_err(hsotg->dev, "%s: Reset failed, aborting", __func__); @@ -2270,7 +2270,7 @@ int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup) * needed to in order to properly detect various parameters). */ if (!initial_setup) { - retval = dwc2_core_reset_and_force_dr_mode(hsotg); + retval = dwc2_core_reset(hsotg, false); if (retval) { dev_err(hsotg->dev, "%s(): Reset failed, aborting\n", __func__); diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 6c7588a2f485..b3871fcafe1e 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -640,19 +640,15 @@ static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg) struct dwc2_hw_params *hw = &hsotg->hw_params; u32 gnptxfsiz; u32 hptxfsiz; - bool forced; if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) return; - forced = dwc2_force_mode_if_needed(hsotg, true); + dwc2_force_mode(hsotg, true); gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ); - if (forced) - dwc2_clear_force_mode(hsotg); - hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT; hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >> @@ -667,14 +663,13 @@ static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg) static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) { struct dwc2_hw_params *hw = &hsotg->hw_params; - bool forced; u32 gnptxfsiz; int fifo, fifo_count; if (hsotg->dr_mode == USB_DR_MODE_HOST) return; - forced = dwc2_force_mode_if_needed(hsotg, false); + dwc2_force_mode(hsotg, false); gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); @@ -686,9 +681,6 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT; } - if (forced) - dwc2_clear_force_mode(hsotg); - hw->dev_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT; } diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 7d80e6360a5a..4c0819554bcd 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -427,13 +427,20 @@ static int dwc2_driver_probe(struct platform_device *dev) * Reset before dwc2_get_hwparams() then it could get power-on real * reset value form registers. */ - dwc2_core_reset_and_force_dr_mode(hsotg); + retval = dwc2_core_reset(hsotg, false); + if (retval) + goto error; /* Detect config values from hardware */ retval = dwc2_get_hwparams(hsotg); if (retval) goto error; + /* + * For OTG cores, set the force mode bits to reflect the value + * of dr_mode. Force mode bits should not be touched at any + * other time after this. + */ dwc2_force_dr_mode(hsotg); retval = dwc2_init_params(hsotg); |