Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Make allocations less aggressive in x_tables, from Minchal Hocko.

 2) Fix netfilter flowtable Kconfig deps, from Pablo Neira Ayuso.

 3) Fix connection loss problems in rtlwifi, from Larry Finger.

 4) Correct DRAM dump length for some chips in ath10k driver, from Yu
    Wang.

 5) Fix ABORT handling in rxrpc, from David Howells.

 6) Add SPDX tags to Sun networking drivers, from Shannon Nelson.

 7) Some ipv6 onlink handling fixes, from David Ahern.

 8) Netem packet scheduler interval calcualtion fix from Md. Islam.

 9) Don't put crypto buffers on-stack in rxrpc, from David Howells.

10) Fix handling of error non-delivery status in netlink multicast
    delivery over multiple namespaces, from Nicolas Dichtel.

11) Missing xdp flush in tuntap driver, from Jason Wang.

12) Synchonize RDS protocol netns/module teardown with rds object
    management, from Sowini Varadhan.

13) Add nospec annotations to mpls, from Dan Williams.

14) Fix SKB truesize handling in TIPC, from Hoang Le.

15) Interrupt masking fixes in stammc from Niklas Cassel.

16) Don't allow ptr_ring objects to be sized outside of kmalloc's
    limits, from Jason Wang.

17) Don't allow SCTP chunks to be built which will have a length
    exceeding the chunk header's 16-bit length field, from Alexey
    Kodanev.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (82 commits)
  ibmvnic: Remove skb->protocol checks in ibmvnic_xmit
  bpf: fix rlimit in reuseport net selftest
  sctp: verify size of a new chunk in _sctp_make_chunk()
  s390/qeth: fix SETIP command handling
  s390/qeth: fix underestimated count of buffer elements
  ptr_ring: try vmalloc() when kmalloc() fails
  ptr_ring: fail early if queue occupies more than KMALLOC_MAX_SIZE
  net: stmmac: remove redundant enable of PMT irq
  net: stmmac: rename GMAC_INT_DEFAULT_MASK for dwmac4
  net: stmmac: discard disabled flags in interrupt status register
  ibmvnic: Reset long term map ID counter
  tools/libbpf: handle issues with bpf ELF objects containing .eh_frames
  selftests/bpf: add selftest that use test_libbpf_open
  selftests/bpf: add test program for loading BPF ELF files
  tools/libbpf: improve the pr_debug statements to contain section numbers
  bpf: Sync kernel ABI header with tooling header for bpf_common.h
  net: phy: fix phy_start to consider PHY_IGNORE_INTERRUPT
  net: thunder: change q_len's type to handle max ring size
  tipc: fix skb truesize/datasize ratio control
  net/sched: cls_u32: fix cls_u32 on filter replace
  ...

13 files changed, 371 insertions, 29 deletions

diff --git a/tools/bpf/bpftool/Documentation/Makefile b/tools/bpf/bpftool/Documentation/Makefile
index c462a928e03d..a9d47c1558bb 100644
--- a/tools/bpf/bpftool/Documentation/Makefile
+++ b/tools/bpf/bpftool/Documentation/Makefile
@@ -23,7 +23,12 @@ DOC_MAN8 = $(addprefix $(OUTPUT),$(_DOC_MAN8))
 man: man8
 man8: $(DOC_MAN8)
 
+RST2MAN_DEP := $(shell command -v rst2man 2>/dev/null)
+
 $(OUTPUT)%.8: %.rst
+ifndef RST2MAN_DEP
+	$(error "rst2man not found, but required to generate man pages")
+endif
 	$(QUIET_GEN)rst2man $< > $@
 
 clean:
diff --git a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
index 2fe2a1bdbe3e..0e4e923235b6 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
@@ -26,8 +26,8 @@ MAP COMMANDS
 |	**bpftool** **cgroup help**
 |
 |	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
-|	*ATTACH_TYPE* := { *ingress* | *egress* | *sock_create* | *sock_ops* | *device* }
-|	*ATTACH_FLAGS* := { *multi* | *override* }
+|	*ATTACH_TYPE* := { **ingress** | **egress** | **sock_create** | **sock_ops** | **device** }
+|	*ATTACH_FLAGS* := { **multi** | **override** }
 
 DESCRIPTION
 ===========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-map.rst b/tools/bpf/bpftool/Documentation/bpftool-map.rst
index 0ab32b312aec..457e868bd32f 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-map.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-map.rst
@@ -31,7 +31,8 @@ MAP COMMANDS
 |	**bpftool** **map help**
 |
 |	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
-|	*VALUE* := { *BYTES* | *MAP* | *PROGRAM* }
+|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
+|	*VALUE* := { *BYTES* | *MAP* | *PROG* }
 |	*UPDATE_FLAGS* := { **any** | **exist** | **noexist** }
 
 DESCRIPTION
diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool
index 0137866bb8f6..08719c54a614 100644
--- a/tools/bpf/bpftool/bash-completion/bpftool
+++ b/tools/bpf/bpftool/bash-completion/bpftool
@@ -52,16 +52,24 @@ _bpftool_once_attr()
     done
 }
 
-# Takes a list of words in argument; adds them all to COMPREPLY if none of them
-# is already present on the command line. Returns no value.
-_bpftool_one_of_list()
+# Takes a list of words as argument; if any of those words is present on the
+# command line, return 0. Otherwise, return 1.
+_bpftool_search_list()
 {
     local w idx
     for w in $*; do
         for (( idx=3; idx < ${#words[@]}-1; idx++ )); do
-            [[ $w == ${words[idx]} ]] && return 1
+            [[ $w == ${words[idx]} ]] && return 0
         done
     done
+    return 1
+}
+
+# Takes a list of words in argument; adds them all to COMPREPLY if none of them
+# is already present on the command line. Returns no value.
+_bpftool_one_of_list()
+{
+    _bpftool_search_list $* && return 1
     COMPREPLY+=( $( compgen -W "$*" -- "$cur" ) )
 }
 
@@ -230,10 +238,14 @@ _bpftool()
                     fi
                     return 0
                     ;;
+                load)
+                    _filedir
+                    return 0
+                    ;;
                 *)
                     [[ $prev == $object ]] && \
-                        COMPREPLY=( $( compgen -W 'dump help pin show list' -- \
-                            "$cur" ) )
+                        COMPREPLY=( $( compgen -W 'dump help pin load \
+                            show list' -- "$cur" ) )
                     ;;
             esac
             ;;
@@ -347,6 +359,54 @@ _bpftool()
                     ;;
             esac
             ;;
+        cgroup)
+            case $command in
+                show|list)
+                    _filedir
+                    return 0
+                    ;;
+                attach|detach)
+                    local ATTACH_TYPES='ingress egress sock_create sock_ops \
+                        device'
+                    local ATTACH_FLAGS='multi override'
+                    local PROG_TYPE='id pinned tag'
+                    case $prev in
+                        $command)
+                            _filedir
+                            return 0
+                            ;;
+                        ingress|egress|sock_create|sock_ops|device)
+                            COMPREPLY=( $( compgen -W "$PROG_TYPE" -- \
+                                "$cur" ) )
+                            return 0
+                            ;;
+                        id)
+                            _bpftool_get_prog_ids
+                            return 0
+                            ;;
+                        *)
+                            if ! _bpftool_search_list "$ATTACH_TYPES"; then
+                                COMPREPLY=( $( compgen -W "$ATTACH_TYPES" -- \
+                                    "$cur" ) )
+                            elif [[ "$command" == "attach" ]]; then
+                                # We have an attach type on the command line,
+                                # but it is not the previous word, or
+                                # "id|pinned|tag" (we already checked for
+                                # that). This should only leave the case when
+                                # we need attach flags for "attach" commamnd.
+                                _bpftool_one_of_list "$ATTACH_FLAGS"
+                            fi
+                            return 0
+                            ;;
+                    esac
+                    ;;
+                *)
+                    [[ $prev == $object ]] && \
+                        COMPREPLY=( $( compgen -W 'help attach detach \
+                            show list' -- "$cur" ) )
+                    ;;
+            esac
+            ;;
     esac
 } &&
 complete -F _bpftool bpftool
diff --git a/tools/include/uapi/linux/bpf_common.h b/tools/include/uapi/linux/bpf_common.h
index 18be90725ab0..ee97668bdadb 100644
--- a/tools/include/uapi/linux/bpf_common.h
+++ b/tools/include/uapi/linux/bpf_common.h
@@ -15,9 +15,10 @@
 
 /* ld/ldx fields */
 #define BPF_SIZE(code)  ((code) & 0x18)
-#define		BPF_W		0x00
-#define		BPF_H		0x08
-#define		BPF_B		0x10
+#define		BPF_W		0x00 /* 32-bit */
+#define		BPF_H		0x08 /* 16-bit */
+#define		BPF_B		0x10 /*  8-bit */
+/* eBPF		BPF_DW		0x18    64-bit */
 #define BPF_MODE(code)  ((code) & 0xe0)
 #define		BPF_IMM		0x00
 #define		BPF_ABS		0x20
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 71ddc481f349..97073d649c1a 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -319,8 +319,8 @@ bpf_program__init(void *data, size_t size, char *section_name, int idx,
 
 	prog->section_name = strdup(section_name);
 	if (!prog->section_name) {
-		pr_warning("failed to alloc name for prog under section %s\n",
-			   section_name);
+		pr_warning("failed to alloc name for prog under section(%d) %s\n",
+			   idx, section_name);
 		goto errout;
 	}
 
@@ -742,6 +742,24 @@ bpf_object__init_maps(struct bpf_object *obj)
 	return 0;
 }
 
+static bool section_have_execinstr(struct bpf_object *obj, int idx)
+{
+	Elf_Scn *scn;
+	GElf_Shdr sh;
+
+	scn = elf_getscn(obj->efile.elf, idx);
+	if (!scn)
+		return false;
+
+	if (gelf_getshdr(scn, &sh) != &sh)
+		return false;
+
+	if (sh.sh_flags & SHF_EXECINSTR)
+		return true;
+
+	return false;
+}
+
 static int bpf_object__elf_collect(struct bpf_object *obj)
 {
 	Elf *elf = obj->efile.elf;
@@ -763,29 +781,29 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
 
 		idx++;
 		if (gelf_getshdr(scn, &sh) != &sh) {
-			pr_warning("failed to get section header from %s\n",
-				   obj->path);
+			pr_warning("failed to get section(%d) header from %s\n",
+				   idx, obj->path);
 			err = -LIBBPF_ERRNO__FORMAT;
 			goto out;
 		}
 
 		name = elf_strptr(elf, ep->e_shstrndx, sh.sh_name);
 		if (!name) {
-			pr_warning("failed to get section name from %s\n",
-				   obj->path);
+			pr_warning("failed to get section(%d) name from %s\n",
+				   idx, obj->path);
 			err = -LIBBPF_ERRNO__FORMAT;
 			goto out;
 		}
 
 		data = elf_getdata(scn, 0);
 		if (!data) {
-			pr_warning("failed to get section data from %s(%s)\n",
-				   name, obj->path);
+			pr_warning("failed to get section(%d) data from %s(%s)\n",
+				   idx, name, obj->path);
 			err = -LIBBPF_ERRNO__FORMAT;
 			goto out;
 		}
-		pr_debug("section %s, size %ld, link %d, flags %lx, type=%d\n",
-			 name, (unsigned long)data->d_size,
+		pr_debug("section(%d) %s, size %ld, link %d, flags %lx, type=%d\n",
+			 idx, name, (unsigned long)data->d_size,
 			 (int)sh.sh_link, (unsigned long)sh.sh_flags,
 			 (int)sh.sh_type);
 
@@ -825,6 +843,14 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
 		} else if (sh.sh_type == SHT_REL) {
 			void *reloc = obj->efile.reloc;
 			int nr_reloc = obj->efile.nr_reloc + 1;
+			int sec = sh.sh_info; /* points to other section */
+
+			/* Only do relo for section with exec instructions */
+			if (!section_have_execinstr(obj, sec)) {
+				pr_debug("skip relo %s(%d) for section(%d)\n",
+					 name, idx, sec);
+				continue;
+			}
 
 			reloc = realloc(reloc,
 					sizeof(*obj->efile.reloc) * nr_reloc);
@@ -840,6 +866,8 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
 				obj->efile.reloc[n].shdr = sh;
 				obj->efile.reloc[n].data = data;
 			}
+		} else {
+			pr_debug("skip section(%d) %s\n", idx, name);
 		}
 		if (err)
 			goto out;
@@ -1119,8 +1147,7 @@ static int bpf_object__collect_reloc(struct bpf_object *obj)
 
 		prog = bpf_object__find_prog_by_idx(obj, idx);
 		if (!prog) {
-			pr_warning("relocation failed: no %d section\n",
-				   idx);
+			pr_warning("relocation failed: no section(%d)\n", idx);
 			return -LIBBPF_ERRNO__RELOC;
 		}
 
@@ -1816,12 +1843,17 @@ static const struct {
 	BPF_PROG_SEC("socket",		BPF_PROG_TYPE_SOCKET_FILTER),
 	BPF_PROG_SEC("kprobe/",		BPF_PROG_TYPE_KPROBE),
 	BPF_PROG_SEC("kretprobe/",	BPF_PROG_TYPE_KPROBE),
+	BPF_PROG_SEC("classifier",	BPF_PROG_TYPE_SCHED_CLS),
+	BPF_PROG_SEC("action",		BPF_PROG_TYPE_SCHED_ACT),
 	BPF_PROG_SEC("tracepoint/",	BPF_PROG_TYPE_TRACEPOINT),
 	BPF_PROG_SEC("xdp",		BPF_PROG_TYPE_XDP),
 	BPF_PROG_SEC("perf_event",	BPF_PROG_TYPE_PERF_EVENT),
 	BPF_PROG_SEC("cgroup/skb",	BPF_PROG_TYPE_CGROUP_SKB),
 	BPF_PROG_SEC("cgroup/sock",	BPF_PROG_TYPE_CGROUP_SOCK),
 	BPF_PROG_SEC("cgroup/dev",	BPF_PROG_TYPE_CGROUP_DEVICE),
+	BPF_PROG_SEC("lwt_in",		BPF_PROG_TYPE_LWT_IN),
+	BPF_PROG_SEC("lwt_out",		BPF_PROG_TYPE_LWT_OUT),
+	BPF_PROG_SEC("lwt_xmit",	BPF_PROG_TYPE_LWT_XMIT),
 	BPF_PROG_SEC("sockops",		BPF_PROG_TYPE_SOCK_OPS),
 	BPF_PROG_SEC("sk_skb",		BPF_PROG_TYPE_SK_SKB),
 };
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 566d6adc172a..5c43c187f27c 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -13,6 +13,7 @@ endif
 CFLAGS += -Wall -O2 -I$(APIDIR) -I$(LIBDIR) -I$(GENDIR) $(GENFLAGS) -I../../../include
 LDLIBS += -lcap -lelf -lrt -lpthread
 
+# Order correspond to 'make run_tests' order
 TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \
 	test_align test_verifier_log test_dev_cgroup test_tcpbpf_user
 
@@ -22,15 +23,24 @@ TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test
 	test_l4lb_noinline.o test_xdp_noinline.o test_stacktrace_map.o \
 	sample_map_ret0.o test_tcpbpf_kern.o
 
-TEST_PROGS := test_kmod.sh test_xdp_redirect.sh test_xdp_meta.sh \
+# Order correspond to 'make run_tests' order
+TEST_PROGS := test_kmod.sh \
+	test_libbpf.sh \
+	test_xdp_redirect.sh \
+	test_xdp_meta.sh \
 	test_offload.py
 
+# Compile but not part of 'make run_tests'
+TEST_GEN_PROGS_EXTENDED = test_libbpf_open
+
 include ../lib.mk
 
 BPFOBJ := $(OUTPUT)/libbpf.a cgroup_helpers.c
 
 $(TEST_GEN_PROGS): $(BPFOBJ)
 
+$(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/libbpf.a
+
 .PHONY: force
 
 # force a rebuild of BPFOBJ when its dependencies are updated
diff --git a/tools/testing/selftests/bpf/test_kmod.sh b/tools/testing/selftests/bpf/test_kmod.sh
index ed4774d8d6ed..35669ccd4d23 100755
--- a/tools/testing/selftests/bpf/test_kmod.sh
+++ b/tools/testing/selftests/bpf/test_kmod.sh
@@ -10,9 +10,21 @@ test_run()
 
 	echo "[ JIT enabled:$1 hardened:$2 ]"
 	dmesg -C
-	insmod $SRC_TREE/lib/test_bpf.ko 2> /dev/null
-	if [ $? -ne 0 ]; then
-		rc=1
+	if [ -f ${SRC_TREE}/lib/test_bpf.ko ]; then
+		insmod ${SRC_TREE}/lib/test_bpf.ko 2> /dev/null
+		if [ $? -ne 0 ]; then
+			rc=1
+		fi
+	else
+		# Use modprobe dry run to check for missing test_bpf module
+		if ! /sbin/modprobe -q -n test_bpf; then
+			echo "test_bpf: [SKIP]"
+		elif /sbin/modprobe -q test_bpf; then
+			echo "test_bpf: ok"
+		else
+			echo "test_bpf: [FAIL]"
+			rc=1
+		fi
 	fi
 	rmmod  test_bpf 2> /dev/null
 	dmesg | grep FAIL
diff --git a/tools/testing/selftests/bpf/test_libbpf.sh b/tools/testing/selftests/bpf/test_libbpf.sh
new file mode 100755
index 000000000000..d97dc914cd49
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_libbpf.sh
@@ -0,0 +1,49 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+export TESTNAME=test_libbpf
+
+# Determine selftest success via shell exit code
+exit_handler()
+{
+	if (( $? == 0 )); then
+		echo "selftests: $TESTNAME [PASS]";
+	else
+		echo "$TESTNAME: failed at file $LAST_LOADED" 1>&2
+		echo "selftests: $TESTNAME [FAILED]";
+	fi
+}
+
+libbpf_open_file()
+{
+	LAST_LOADED=$1
+	if [ -n "$VERBOSE" ]; then
+	    ./test_libbpf_open $1
+	else
+	    ./test_libbpf_open --quiet $1
+	fi
+}
+
+# Exit script immediately (well catched by trap handler) if any
+# program/thing exits with a non-zero status.
+set -e
+
+# (Use 'trap -l' to list meaning of numbers)
+trap exit_handler 0 2 3 6 9
+
+libbpf_open_file test_l4lb.o
+
+# TODO: fix libbpf to load noinline functions
+# [warning] libbpf: incorrect bpf_call opcode
+#libbpf_open_file test_l4lb_noinline.o
+
+# TODO: fix test_xdp_meta.c to load with libbpf
+# [warning] libbpf: test_xdp_meta.o doesn't provide kernel version
+#libbpf_open_file test_xdp_meta.o
+
+# TODO: fix libbpf to handle .eh_frame
+# [warning] libbpf: relocation failed: no section(10)
+#libbpf_open_file ../../../../samples/bpf/tracex3_kern.o
+
+# Success
+exit 0
diff --git a/tools/testing/selftests/bpf/test_libbpf_open.c b/tools/testing/selftests/bpf/test_libbpf_open.c
new file mode 100644
index 000000000000..8fcd1c076add
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_libbpf_open.c
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Copyright (c) 2018 Jesper Dangaard Brouer, Red Hat Inc.
+ */
+static const char *__doc__ =
+	"Libbpf test program for loading BPF ELF object files";
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdarg.h>
+#include <bpf/libbpf.h>
+#include <getopt.h>
+
+static const struct option long_options[] = {
+	{"help",	no_argument,		NULL, 'h' },
+	{"debug",	no_argument,		NULL, 'D' },
+	{"quiet",	no_argument,		NULL, 'q' },
+	{0, 0, NULL,  0 }
+};
+
+static void usage(char *argv[])
+{
+	int i;
+
+	printf("\nDOCUMENTATION:\n%s\n\n", __doc__);
+	printf(" Usage: %s (options-see-below) BPF_FILE\n", argv[0]);
+	printf(" Listing options:\n");
+	for (i = 0; long_options[i].name != 0; i++) {
+		printf(" --%-12s", long_options[i].name);
+		printf(" short-option: -%c",
+		       long_options[i].val);
+		printf("\n");
+	}
+	printf("\n");
+}
+
+#define DEFINE_PRINT_FN(name, enabled) \
+static int libbpf_##name(const char *fmt, ...)  	\
+{							\
+        va_list args;					\
+        int ret;					\
+							\
+        va_start(args, fmt);				\
+	if (enabled) {					\
+		fprintf(stderr, "[" #name "] ");	\
+		ret = vfprintf(stderr, fmt, args);	\
+	}						\
+        va_end(args);					\
+        return ret;					\
+}
+DEFINE_PRINT_FN(warning, 1)
+DEFINE_PRINT_FN(info, 1)
+DEFINE_PRINT_FN(debug, 1)
+
+#define EXIT_FAIL_LIBBPF EXIT_FAILURE
+#define EXIT_FAIL_OPTION 2
+
+int test_walk_progs(struct bpf_object *obj, bool verbose)
+{
+	struct bpf_program *prog;
+	int cnt = 0;
+
+	bpf_object__for_each_program(prog, obj) {
+		cnt++;
+		if (verbose)
+			printf("Prog (count:%d) section_name: %s\n", cnt,
+			       bpf_program__title(prog, false));
+	}
+	return 0;
+}
+
+int test_walk_maps(struct bpf_object *obj, bool verbose)
+{
+	struct bpf_map *map;
+	int cnt = 0;
+
+	bpf_map__for_each(map, obj) {
+		cnt++;
+		if (verbose)
+			printf("Map (count:%d) name: %s\n", cnt,
+			       bpf_map__name(map));
+	}
+	return 0;
+}
+
+int test_open_file(char *filename, bool verbose)
+{
+	struct bpf_object *bpfobj = NULL;
+	long err;
+
+	if (verbose)
+		printf("Open BPF ELF-file with libbpf: %s\n", filename);
+
+	/* Load BPF ELF object file and check for errors */
+	bpfobj = bpf_object__open(filename);
+	err = libbpf_get_error(bpfobj);
+	if (err) {
+		char err_buf[128];
+		libbpf_strerror(err, err_buf, sizeof(err_buf));
+		if (verbose)
+			printf("Unable to load eBPF objects in file '%s': %s\n",
+			       filename, err_buf);
+		return EXIT_FAIL_LIBBPF;
+	}
+	test_walk_progs(bpfobj, verbose);
+	test_walk_maps(bpfobj, verbose);
+
+	if (verbose)
+		printf("Close BPF ELF-file with libbpf: %s\n",
+		       bpf_object__name(bpfobj));
+	bpf_object__close(bpfobj);
+
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	char filename[1024] = { 0 };
+	bool verbose = 1;
+	int longindex = 0;
+	int opt;
+
+	libbpf_set_print(libbpf_warning, libbpf_info, NULL);
+
+	/* Parse commands line args */
+	while ((opt = getopt_long(argc, argv, "hDq",
+				  long_options, &longindex)) != -1) {
+		switch (opt) {
+		case 'D':
+			libbpf_set_print(libbpf_warning, libbpf_info,
+					 libbpf_debug);
+			break;
+		case 'q': /* Use in scripting mode */
+			verbose = 0;
+			break;
+		case 'h':
+		default:
+			usage(argv);
+			return EXIT_FAIL_OPTION;
+		}
+	}
+	if (optind >= argc) {
+		usage(argv);
+		printf("ERROR: Expected BPF_FILE argument after options\n");
+		return EXIT_FAIL_OPTION;
+	}
+	snprintf(filename, sizeof(filename), "%s", argv[optind]);
+
+	return test_open_file(filename, verbose);
+}
diff --git a/tools/testing/selftests/bpf/test_xdp_meta.sh b/tools/testing/selftests/bpf/test_xdp_meta.sh
index 307aa856cee3..637fcf4fe4e3 100755
--- a/tools/testing/selftests/bpf/test_xdp_meta.sh
+++ b/tools/testing/selftests/bpf/test_xdp_meta.sh
@@ -9,6 +9,7 @@ cleanup()
 	fi
 
 	set +e
+	ip link del veth1 2> /dev/null
 	ip netns del ns1 2> /dev/null
 	ip netns del ns2 2> /dev/null
 }
diff --git a/tools/testing/selftests/bpf/test_xdp_redirect.sh b/tools/testing/selftests/bpf/test_xdp_redirect.sh
index 344a3656dea6..c4b17e08d431 100755
--- a/tools/testing/selftests/bpf/test_xdp_redirect.sh
+++ b/tools/testing/selftests/bpf/test_xdp_redirect.sh
@@ -19,6 +19,8 @@ cleanup()
 	fi
 
 	set +e
+	ip link del veth1 2> /dev/null
+	ip link del veth2 2> /dev/null
 	ip netns del ns1 2> /dev/null
 	ip netns del ns2 2> /dev/null
 }
diff --git a/tools/testing/selftests/net/reuseport_bpf.c b/tools/testing/selftests/net/reuseport_bpf.c
index 4a8217448f20..cad14cd0ea92 100644
--- a/tools/testing/selftests/net/reuseport_bpf.c
+++ b/tools/testing/selftests/net/reuseport_bpf.c
@@ -21,6 +21,7 @@
 #include <sys/epoll.h>
 #include <sys/types.h>
 #include <sys/socket.h>
+#include <sys/resource.h>
 #include <unistd.h>
 
 #ifndef ARRAY_SIZE
@@ -190,11 +191,14 @@ static void send_from(struct test_params p, uint16_t sport, char *buf,
 	struct sockaddr * const saddr = new_any_sockaddr(p.send_family, sport);
 	struct sockaddr * const daddr =
 		new_loopback_sockaddr(p.send_family, p.recv_port);
-	const int fd = socket(p.send_family, p.protocol, 0);
+	const int fd = socket(p.send_family, p.protocol, 0), one = 1;
 
 	if (fd < 0)
 		error(1, errno, "failed to create send socket");
 
+	if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)))
+		error(1, errno, "failed to set reuseaddr");
+
 	if (bind(fd, saddr, sockaddr_size()))
 		error(1, errno, "failed to bind send socket");
 
@@ -433,6 +437,21 @@ void enable_fastopen(void)
 	}
 }
 
+static struct rlimit rlim_old, rlim_new;
+
+static  __attribute__((constructor)) void main_ctor(void)
+{
+	getrlimit(RLIMIT_MEMLOCK, &rlim_old);
+	rlim_new.rlim_cur = rlim_old.rlim_cur + (1UL << 20);
+	rlim_new.rlim_max = rlim_old.rlim_max + (1UL << 20);
+	setrlimit(RLIMIT_MEMLOCK, &rlim_new);
+}
+
+static __attribute__((destructor)) void main_dtor(void)
+{
+	setrlimit(RLIMIT_MEMLOCK, &rlim_old);
+}
+
 int main(void)
 {
 	fprintf(stderr, "---- IPv4 UDP ----\n");