diff options
author | Thomas Bogendoerfer <tsbogend@alpha.franken.de> | 2008-07-12 12:12:20 +0200 |
---|---|---|
committer | Jaroslav Kysela <perex@perex.cz> | 2008-07-14 09:00:57 +0200 |
commit | 787dba37a6ff5c80c67f37c081712a6e4af92e25 (patch) | |
tree | 46fb52cca0a1f9d629d6602e4b5747425353af8f /sound/mips | |
parent | 9e4641541e9681a568483133813332cfafa34d86 (diff) | |
download | blackbird-op-linux-787dba37a6ff5c80c67f37c081712a6e4af92e25.tar.gz blackbird-op-linux-787dba37a6ff5c80c67f37c081712a6e4af92e25.zip |
ALSA: ALSA driver for SGI HAL2 audio device
This patch adds a new ALSA driver for the audio device found inside
many older SGI workstation (Indy, Indigo2). The hardware uses a SGI
custom chip, which feeds two codec chips, an IEC chip and a synth chip.
Currently only one of the codecs is supported. This driver already has
the same functionality as the HAL2 OSS driver and will replace it.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Diffstat (limited to 'sound/mips')
-rw-r--r-- | sound/mips/Kconfig | 7 | ||||
-rw-r--r-- | sound/mips/Makefile | 2 | ||||
-rw-r--r-- | sound/mips/hal2.c | 947 | ||||
-rw-r--r-- | sound/mips/hal2.h | 245 |
4 files changed, 1201 insertions, 0 deletions
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig index bb26f6cf4c0a..2a61cade4ac3 100644 --- a/sound/mips/Kconfig +++ b/sound/mips/Kconfig @@ -9,6 +9,13 @@ menuconfig SND_MIPS if SND_MIPS +config SND_SGI_HAL2 + tristate "SGI HAL2 Audio" + depends on SGI_HAS_HAL2 + help + Sound support for the SGI Indy and Indigo2 Workstation. + + config SND_AU1X00 tristate "Au1x00 AC97 Port Driver" depends on SOC_AU1000 || SOC_AU1100 || SOC_AU1500 diff --git a/sound/mips/Makefile b/sound/mips/Makefile index 47afed971fba..63f4a9c0a8d9 100644 --- a/sound/mips/Makefile +++ b/sound/mips/Makefile @@ -3,6 +3,8 @@ # snd-au1x00-objs := au1x00.o +snd-sgi-hal2-objs := hal2.o # Toplevel Module Dependency obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o +obj-$(CONFIG_SND_SGI_HAL2) += snd-sgi-hal2.o diff --git a/sound/mips/hal2.c b/sound/mips/hal2.c new file mode 100644 index 000000000000..db495be01861 --- /dev/null +++ b/sound/mips/hal2.c @@ -0,0 +1,947 @@ +/* + * Driver for A2 audio system used in SGI machines + * Copyright (c) 2008 Thomas Bogendoerfer <tsbogend@alpha.fanken.de> + * + * Based on OSS code from Ladislav Michl <ladis@linux-mips.org>, which + * was based on code from Ulf Carlsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <asm/sgi/hpc3.h> +#include <asm/sgi/ip22.h> + +#include <sound/core.h> +#include <sound/control.h> +#include <sound/pcm.h> +#include <sound/pcm-indirect.h> +#include <sound/initval.h> + +#include "hal2.h" + +static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */ +static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */ + +module_param(index, int, 0444); +MODULE_PARM_DESC(index, "Index value for SGI HAL2 soundcard."); +module_param(id, charp, 0444); +MODULE_PARM_DESC(id, "ID string for SGI HAL2 soundcard."); +MODULE_DESCRIPTION("ALSA driver for SGI HAL2 audio"); +MODULE_AUTHOR("Thomas Bogendoerfer"); +MODULE_LICENSE("GPL"); + + +#define H2_BLOCK_SIZE 1024 +#define H2_BUF_SIZE 16384 + +struct hal2_pbus { + struct hpc3_pbus_dmacregs *pbus; + int pbusnr; + unsigned int ctrl; /* Current state of pbus->pbdma_ctrl */ +}; + +struct hal2_desc { + struct hpc_dma_desc desc; + u32 pad; /* padding */ +}; + +struct hal2_codec { + struct snd_pcm_indirect pcm_indirect; + struct snd_pcm_substream *substream; + + unsigned char *buffer; + dma_addr_t buffer_dma; + struct hal2_desc *desc; + dma_addr_t desc_dma; + int desc_count; + struct hal2_pbus pbus; + int voices; /* mono/stereo */ + unsigned int sample_rate; + unsigned int master; /* Master frequency */ + unsigned short mod; /* MOD value */ + unsigned short inc; /* INC value */ +}; + +#define H2_MIX_OUTPUT_ATT 0 +#define H2_MIX_INPUT_GAIN 1 + +struct snd_hal2 { + struct snd_card *card; + + struct hal2_ctl_regs *ctl_regs; /* HAL2 ctl registers */ + struct hal2_aes_regs *aes_regs; /* HAL2 aes registers */ + struct hal2_vol_regs *vol_regs; /* HAL2 vol registers */ + struct hal2_syn_regs *syn_regs; /* HAL2 syn registers */ + + struct hal2_codec dac; + struct hal2_codec adc; +}; + +#define H2_INDIRECT_WAIT(regs) while (hal2_read(®s->isr) & H2_ISR_TSTATUS); + +#define H2_READ_ADDR(addr) (addr | (1<<7)) +#define H2_WRITE_ADDR(addr) (addr) + +static inline u32 hal2_read(u32 *reg) +{ + return __raw_readl(reg); +} + +static inline void hal2_write(u32 val, u32 *reg) +{ + __raw_writel(val, reg); +} + + +static u32 hal2_i_read32(struct snd_hal2 *hal2, u16 addr) +{ + u32 ret; + struct hal2_ctl_regs *regs = hal2->ctl_regs; + + hal2_write(H2_READ_ADDR(addr), ®s->iar); + H2_INDIRECT_WAIT(regs); + ret = hal2_read(®s->idr0) & 0xffff; + hal2_write(H2_READ_ADDR(addr) | 0x1, ®s->iar); + H2_INDIRECT_WAIT(regs); + ret |= (hal2_read(®s->idr0) & 0xffff) << 16; + return ret; +} + +static void hal2_i_write16(struct snd_hal2 *hal2, u16 addr, u16 val) +{ + struct hal2_ctl_regs *regs = hal2->ctl_regs; + + hal2_write(val, ®s->idr0); + hal2_write(0, ®s->idr1); + hal2_write(0, ®s->idr2); + hal2_write(0, ®s->idr3); + hal2_write(H2_WRITE_ADDR(addr), ®s->iar); + H2_INDIRECT_WAIT(regs); +} + +static void hal2_i_write32(struct snd_hal2 *hal2, u16 addr, u32 val) +{ + struct hal2_ctl_regs *regs = hal2->ctl_regs; + + hal2_write(val & 0xffff, ®s->idr0); + hal2_write(val >> 16, ®s->idr1); + hal2_write(0, ®s->idr2); + hal2_write(0, ®s->idr3); + hal2_write(H2_WRITE_ADDR(addr), ®s->iar); + H2_INDIRECT_WAIT(regs); +} + +static void hal2_i_setbit16(struct snd_hal2 *hal2, u16 addr, u16 bit) +{ + struct hal2_ctl_regs *regs = hal2->ctl_regs; + + hal2_write(H2_READ_ADDR(addr), ®s->iar); + H2_INDIRECT_WAIT(regs); + hal2_write((hal2_read(®s->idr0) & 0xffff) | bit, ®s->idr0); + hal2_write(0, ®s->idr1); + hal2_write(0, ®s->idr2); + hal2_write(0, ®s->idr3); + hal2_write(H2_WRITE_ADDR(addr), ®s->iar); + H2_INDIRECT_WAIT(regs); +} + +static void hal2_i_clearbit16(struct snd_hal2 *hal2, u16 addr, u16 bit) +{ + struct hal2_ctl_regs *regs = hal2->ctl_regs; + + hal2_write(H2_READ_ADDR(addr), ®s->iar); + H2_INDIRECT_WAIT(regs); + hal2_write((hal2_read(®s->idr0) & 0xffff) & ~bit, ®s->idr0); + hal2_write(0, ®s->idr1); + hal2_write(0, ®s->idr2); + hal2_write(0, ®s->idr3); + hal2_write(H2_WRITE_ADDR(addr), ®s->iar); + H2_INDIRECT_WAIT(regs); +} + +static int hal2_gain_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + switch ((int)kcontrol->private_value) { + case H2_MIX_OUTPUT_ATT: + uinfo->value.integer.max = 31; + break; + case H2_MIX_INPUT_GAIN: + uinfo->value.integer.max = 15; + break; + } + return 0; +} + +static int hal2_gain_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_hal2 *hal2 = snd_kcontrol_chip(kcontrol); + u32 tmp; + int l, r; + + switch ((int)kcontrol->private_value) { + case H2_MIX_OUTPUT_ATT: + tmp = hal2_i_read32(hal2, H2I_DAC_C2); + if (tmp & H2I_C2_MUTE) { + l = 0; + r = 0; + } else { + l = 31 - ((tmp >> H2I_C2_L_ATT_SHIFT) & 31); + r = 31 - ((tmp >> H2I_C2_R_ATT_SHIFT) & 31); + } + break; + case H2_MIX_INPUT_GAIN: + tmp = hal2_i_read32(hal2, H2I_ADC_C2); + l = (tmp >> H2I_C2_L_GAIN_SHIFT) & 15; + r = (tmp >> H2I_C2_R_GAIN_SHIFT) & 15; + break; + } + ucontrol->value.integer.value[0] = l; + ucontrol->value.integer.value[1] = r; + + return 0; +} + +static int hal2_gain_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_hal2 *hal2 = snd_kcontrol_chip(kcontrol); + u32 old, new; + int l, r; + + l = ucontrol->value.integer.value[0]; + r = ucontrol->value.integer.value[1]; + + switch ((int)kcontrol->private_value) { + case H2_MIX_OUTPUT_ATT: + old = hal2_i_read32(hal2, H2I_DAC_C2); + new = old & ~(H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE); + if (l | r) { + l = 31 - l; + r = 31 - r; + new |= (l << H2I_C2_L_ATT_SHIFT); + new |= (r << H2I_C2_R_ATT_SHIFT); + } else + new |= H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE; + hal2_i_write32(hal2, H2I_DAC_C2, new); + break; + case H2_MIX_INPUT_GAIN: + old = hal2_i_read32(hal2, H2I_ADC_C2); + new = old & ~(H2I_C2_L_GAIN_M | H2I_C2_R_GAIN_M); + new |= (l << H2I_C2_L_GAIN_SHIFT); + new |= (r << H2I_C2_R_GAIN_SHIFT); + hal2_i_write32(hal2, H2I_ADC_C2, new); + break; + } + return old != new; +} + +static struct snd_kcontrol_new hal2_ctrl_headphone __devinitdata = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Headphone Playback Volume", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .private_value = H2_MIX_OUTPUT_ATT, + .info = hal2_gain_info, + .get = hal2_gain_get, + .put = hal2_gain_put, +}; + +static struct snd_kcontrol_new hal2_ctrl_mic __devinitdata = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Mic Capture Volume", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .private_value = H2_MIX_INPUT_GAIN, + .info = hal2_gain_info, + .get = hal2_gain_get, + .put = hal2_gain_put, +}; + +static int __devinit hal2_mixer_create(struct snd_hal2 *hal2) +{ + int err; + + /* mute DAC */ + hal2_i_write32(hal2, H2I_DAC_C2, + H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE); + /* mute ADC */ + hal2_i_write32(hal2, H2I_ADC_C2, 0); + + err = snd_ctl_add(hal2->card, + snd_ctl_new1(&hal2_ctrl_headphone, hal2)); + if (err < 0) + return err; + + err = snd_ctl_add(hal2->card, + snd_ctl_new1(&hal2_ctrl_mic, hal2)); + if (err < 0) + return err; + + return 0; +} + +static irqreturn_t hal2_interrupt(int irq, void *dev_id) +{ + struct snd_hal2 *hal2 = dev_id; + irqreturn_t ret = IRQ_NONE; + + /* decide what caused this interrupt */ + if (hal2->dac.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) { + snd_pcm_period_elapsed(hal2->dac.substream); + ret = IRQ_HANDLED; + } + if (hal2->adc.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) { + snd_pcm_period_elapsed(hal2->adc.substream); + ret = IRQ_HANDLED; + } + return ret; +} + +static int hal2_compute_rate(struct hal2_codec *codec, unsigned int rate) +{ + unsigned short mod; + + if (44100 % rate < 48000 % rate) { + mod = 4 * 44100 / rate; + codec->master = 44100; + } else { + mod = 4 * 48000 / rate; + codec->master = 48000; + } + + codec->inc = 4; + codec->mod = mod; + rate = 4 * codec->master / mod; + + return rate; +} + +static void hal2_set_dac_rate(struct snd_hal2 *hal2) +{ + unsigned int master = hal2->dac.master; + int inc = hal2->dac.inc; + int mod = hal2->dac.mod; + + hal2_i_write16(hal2, H2I_BRES1_C1, (master == 44100) ? 1 : 0); + hal2_i_write32(hal2, H2I_BRES1_C2, + ((0xffff & (inc - mod - 1)) << 16) | inc); +} + +static void hal2_set_adc_rate(struct snd_hal2 *hal2) +{ + unsigned int master = hal2->adc.master; + int inc = hal2->adc.inc; + int mod = hal2->adc.mod; + + hal2_i_write16(hal2, H2I_BRES2_C1, (master == 44100) ? 1 : 0); + hal2_i_write32(hal2, H2I_BRES2_C2, + ((0xffff & (inc - mod - 1)) << 16) | inc); +} + +static void hal2_setup_dac(struct snd_hal2 *hal2) +{ + unsigned int fifobeg, fifoend, highwater, sample_size; + struct hal2_pbus *pbus = &hal2->dac.pbus; + + /* Now we set up some PBUS information. The PBUS needs information about + * what portion of the fifo it will use. If it's receiving or + * transmitting, and finally whether the stream is little endian or big + * endian. The information is written later, on the start call. + */ + sample_size = 2 * hal2->dac.voices; + /* Fifo should be set to hold exactly four samples. Highwater mark + * should be set to two samples. */ + highwater = (sample_size * 2) >> 1; /* halfwords */ + fifobeg = 0; /* playback is first */ + fifoend = (sample_size * 4) >> 3; /* doublewords */ + pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_LD | + (highwater << 8) | (fifobeg << 16) | (fifoend << 24); + /* We disable everything before we do anything at all */ + pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; + hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX); + /* Setup the HAL2 for playback */ + hal2_set_dac_rate(hal2); + /* Set endianess */ + hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX); + /* Set DMA bus */ + hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr)); + /* We are using 1st Bresenham clock generator for playback */ + hal2_i_write16(hal2, H2I_DAC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT) + | (1 << H2I_C1_CLKID_SHIFT) + | (hal2->dac.voices << H2I_C1_DATAT_SHIFT)); +} + +static void hal2_setup_adc(struct snd_hal2 *hal2) +{ + unsigned int fifobeg, fifoend, highwater, sample_size; + struct hal2_pbus *pbus = &hal2->adc.pbus; + + sample_size = 2 * hal2->adc.voices; + highwater = (sample_size * 2) >> 1; /* halfwords */ + fifobeg = (4 * 4) >> 3; /* record is second */ + fifoend = (4 * 4 + sample_size * 4) >> 3; /* doublewords */ + pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_RCV | HPC3_PDMACTRL_LD | + (highwater << 8) | (fifobeg << 16) | (fifoend << 24); + pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; + hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR); + /* Setup the HAL2 for record */ + hal2_set_adc_rate(hal2); + /* Set endianess */ + hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR); + /* Set DMA bus */ + hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr)); + /* We are using 2nd Bresenham clock generator for record */ + hal2_i_write16(hal2, H2I_ADC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT) + | (2 << H2I_C1_CLKID_SHIFT) + | (hal2->adc.voices << H2I_C1_DATAT_SHIFT)); +} + +static void hal2_start_dac(struct snd_hal2 *hal2) +{ + struct hal2_pbus *pbus = &hal2->dac.pbus; + + pbus->pbus->pbdma_dptr = hal2->dac.desc_dma; + pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT; + /* enable DAC */ + hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX); +} + +static void hal2_start_adc(struct snd_hal2 *hal2) +{ + struct hal2_pbus *pbus = &hal2->adc.pbus; + + pbus->pbus->pbdma_dptr = hal2->adc.desc_dma; + pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT; + /* enable ADC */ + hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR); +} + +static inline void hal2_stop_dac(struct snd_hal2 *hal2) +{ + hal2->dac.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; + /* The HAL2 itself may remain enabled safely */ +} + +static inline void hal2_stop_adc(struct snd_hal2 *hal2) +{ + hal2->adc.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; +} + +static int hal2_alloc_dmabuf(struct hal2_codec *codec) +{ + struct hal2_desc *desc; + dma_addr_t desc_dma, buffer_dma; + int count = H2_BUF_SIZE / H2_BLOCK_SIZE; + int i; + + codec->buffer = dma_alloc_noncoherent(NULL, H2_BUF_SIZE, + &buffer_dma, GFP_KERNEL); + if (!codec->buffer) + return -ENOMEM; + desc = dma_alloc_noncoherent(NULL, count * sizeof(struct hal2_desc), + &desc_dma, GFP_KERNEL); + if (!desc) { + dma_free_noncoherent(NULL, H2_BUF_SIZE, + codec->buffer, buffer_dma); + return -ENOMEM; + } + codec->buffer_dma = buffer_dma; + codec->desc_dma = desc_dma; + codec->desc = desc; + for (i = 0; i < count; i++) { + desc->desc.pbuf = buffer_dma + i * H2_BLOCK_SIZE; + desc->desc.cntinfo = HPCDMA_XIE | H2_BLOCK_SIZE; + desc->desc.pnext = (i == count - 1) ? + desc_dma : desc_dma + (i + 1) * sizeof(struct hal2_desc); + desc++; + } + dma_cache_sync(NULL, codec->desc, count * sizeof(struct hal2_desc), + DMA_TO_DEVICE); + codec->desc_count = count; + return 0; +} + +static void hal2_free_dmabuf(struct hal2_codec *codec) +{ + dma_free_noncoherent(NULL, codec->desc_count * sizeof(struct hal2_desc), + codec->desc, codec->desc_dma); + dma_free_noncoherent(NULL, H2_BUF_SIZE, codec->buffer, + codec->buffer_dma); +} + +static struct snd_pcm_hardware hal2_pcm_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER), + .formats = SNDRV_PCM_FMTBIT_S16_BE, + .rates = SNDRV_PCM_RATE_8000_48000, + .rate_min = 8000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 65536, + .period_bytes_min = 1024, + .period_bytes_max = 65536, + .periods_min = 2, + .periods_max = 1024, +}; + +static int hal2_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + int err; + + err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); + if (err < 0) + return err; + + return 0; +} + +static int hal2_pcm_hw_free(struct snd_pcm_substream *substream) +{ + return snd_pcm_lib_free_pages(substream); +} + +static int hal2_playback_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + int err; + + runtime->hw = hal2_pcm_hw; + + err = hal2_alloc_dmabuf(&hal2->dac); + if (err) + return err; + return 0; +} + +static int hal2_playback_close(struct snd_pcm_substream *substream) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + + hal2_free_dmabuf(&hal2->dac); + return 0; +} + +static int hal2_playback_prepare(struct snd_pcm_substream *substream) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct hal2_codec *dac = &hal2->dac; + + dac->voices = runtime->channels; + dac->sample_rate = hal2_compute_rate(dac, runtime->rate); + memset(&dac->pcm_indirect, 0, sizeof(dac->pcm_indirect)); + dac->pcm_indirect.hw_buffer_size = H2_BUF_SIZE; + dac->pcm_indirect.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream); + dac->substream = substream; + hal2_setup_dac(hal2); + return 0; +} + +static int hal2_playback_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + hal2->dac.pcm_indirect.hw_io = hal2->dac.buffer_dma; + hal2->dac.pcm_indirect.hw_data = 0; + substream->ops->ack(substream); + hal2_start_dac(hal2); + break; + case SNDRV_PCM_TRIGGER_STOP: + hal2_stop_dac(hal2); + break; + default: + return -EINVAL; + } + return 0; +} + +static snd_pcm_uframes_t +hal2_playback_pointer(struct snd_pcm_substream *substream) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + struct hal2_codec *dac = &hal2->dac; + + return snd_pcm_indirect_playback_pointer(substream, &dac->pcm_indirect, + dac->pbus.pbus->pbdma_bptr); +} + +static void hal2_playback_transfer(struct snd_pcm_substream *substream, + struct snd_pcm_indirect *rec, size_t bytes) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + unsigned char *buf = hal2->dac.buffer + rec->hw_data; + + memcpy(buf, substream->runtime->dma_area + rec->sw_data, bytes); + dma_cache_sync(NULL, buf, bytes, DMA_TO_DEVICE); + +} + +static int hal2_playback_ack(struct snd_pcm_substream *substream) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + struct hal2_codec *dac = &hal2->dac; + + dac->pcm_indirect.hw_queue_size = H2_BUF_SIZE / 2; + snd_pcm_indirect_playback_transfer(substream, + &dac->pcm_indirect, + hal2_playback_transfer); + return 0; +} + +static int hal2_capture_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + struct hal2_codec *adc = &hal2->adc; + int err; + + runtime->hw = hal2_pcm_hw; + + err = hal2_alloc_dmabuf(adc); + if (err) + return err; + return 0; +} + +static int hal2_capture_close(struct snd_pcm_substream *substream) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + + hal2_free_dmabuf(&hal2->adc); + return 0; +} + +static int hal2_capture_prepare(struct snd_pcm_substream *substream) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct hal2_codec *adc = &hal2->adc; + + adc->voices = runtime->channels; + adc->sample_rate = hal2_compute_rate(adc, runtime->rate); + memset(&adc->pcm_indirect, 0, sizeof(adc->pcm_indirect)); + adc->pcm_indirect.hw_buffer_size = H2_BUF_SIZE; + adc->pcm_indirect.hw_queue_size = H2_BUF_SIZE / 2; + adc->pcm_indirect.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream); + adc->substream = substream; + hal2_setup_adc(hal2); + return 0; +} + +static int hal2_capture_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + hal2->adc.pcm_indirect.hw_io = hal2->adc.buffer_dma; + hal2->adc.pcm_indirect.hw_data = 0; + printk(KERN_DEBUG "buffer_dma %x\n", hal2->adc.buffer_dma); + hal2_start_adc(hal2); + break; + case SNDRV_PCM_TRIGGER_STOP: + hal2_stop_adc(hal2); + break; + default: + return -EINVAL; + } + return 0; +} + +static snd_pcm_uframes_t +hal2_capture_pointer(struct snd_pcm_substream *substream) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + struct hal2_codec *adc = &hal2->adc; + + return snd_pcm_indirect_capture_pointer(substream, &adc->pcm_indirect, + adc->pbus.pbus->pbdma_bptr); +} + +static void hal2_capture_transfer(struct snd_pcm_substream *substream, + struct snd_pcm_indirect *rec, size_t bytes) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + unsigned char *buf = hal2->adc.buffer + rec->hw_data; + + dma_cache_sync(NULL, buf, bytes, DMA_FROM_DEVICE); + memcpy(substream->runtime->dma_area + rec->sw_data, buf, bytes); +} + +static int hal2_capture_ack(struct snd_pcm_substream *substream) +{ + struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream); + struct hal2_codec *adc = &hal2->adc; + + snd_pcm_indirect_capture_transfer(substream, + &adc->pcm_indirect, + hal2_capture_transfer); + return 0; +} + +static struct snd_pcm_ops hal2_playback_ops = { + .open = hal2_playback_open, + .close = hal2_playback_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = hal2_pcm_hw_params, + .hw_free = hal2_pcm_hw_free, + .prepare = hal2_playback_prepare, + .trigger = hal2_playback_trigger, + .pointer = hal2_playback_pointer, + .ack = hal2_playback_ack, +}; + +static struct snd_pcm_ops hal2_capture_ops = { + .open = hal2_capture_open, + .close = hal2_capture_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = hal2_pcm_hw_params, + .hw_free = hal2_pcm_hw_free, + .prepare = hal2_capture_prepare, + .trigger = hal2_capture_trigger, + .pointer = hal2_capture_pointer, + .ack = hal2_capture_ack, +}; + +static int __devinit hal2_pcm_create(struct snd_hal2 *hal2) +{ + struct snd_pcm *pcm; + int err; + + /* create first pcm device with one outputs and one input */ + err = snd_pcm_new(hal2->card, "SGI HAL2 Audio", 0, 1, 1, &pcm); + if (err < 0) + return err; + + pcm->private_data = hal2; + strcpy(pcm->name, "SGI HAL2"); + + /* set operators */ + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, + &hal2_playback_ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, + &hal2_capture_ops); + snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, + snd_dma_continuous_data(GFP_KERNEL), + 0, 1024 * 1024); + + return 0; +} + +static int hal2_dev_free(struct snd_device *device) +{ + struct snd_hal2 *hal2 = device->device_data; + + free_irq(SGI_HPCDMA_IRQ, hal2); + kfree(hal2); + return 0; +} + +static struct snd_device_ops hal2_ops = { + .dev_free = hal2_dev_free, +}; + +static void hal2_init_codec(struct hal2_codec *codec, struct hpc3_regs *hpc3, + int index) +{ + codec->pbus.pbusnr = index; + codec->pbus.pbus = &hpc3->pbdma[index]; +} + +static int hal2_detect(struct snd_hal2 *hal2) +{ + unsigned short board, major, minor; + unsigned short rev; + + /* reset HAL2 */ + hal2_write(0, &hal2->ctl_regs->isr); + + /* release reset */ + hal2_write(H2_ISR_GLOBAL_RESET_N | H2_ISR_CODEC_RESET_N, + &hal2->ctl_regs->isr); + + + hal2_i_write16(hal2, H2I_RELAY_C, H2I_RELAY_C_STATE); + rev = hal2_read(&hal2->ctl_regs->rev); + if (rev & H2_REV_AUDIO_PRESENT) + return -ENODEV; + + board = (rev & H2_REV_BOARD_M) >> 12; + major = (rev & H2_REV_MAJOR_CHIP_M) >> 4; + minor = (rev & H2_REV_MINOR_CHIP_M); + + printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n", + board, major, minor); + + return 0; +} + +static int hal2_create(struct snd_card *card, struct snd_hal2 **rchip) +{ + struct snd_hal2 *hal2; + struct hpc3_regs *hpc3 = hpc3c0; + int err; + + hal2 = kzalloc(sizeof(struct snd_hal2), GFP_KERNEL); + if (!hal2) + return -ENOMEM; + + hal2->card = card; + + if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, IRQF_SHARED, + "SGI HAL2", hal2)) { + printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ); + kfree(hal2); + return -EAGAIN; + } + + hal2->ctl_regs = (struct hal2_ctl_regs *)hpc3->pbus_extregs[0]; + hal2->aes_regs = (struct hal2_aes_regs *)hpc3->pbus_extregs[1]; + hal2->vol_regs = (struct hal2_vol_regs *)hpc3->pbus_extregs[2]; + hal2->syn_regs = (struct hal2_syn_regs *)hpc3->pbus_extregs[3]; + + if (hal2_detect(hal2) < 0) { + kfree(hal2); + return -ENODEV; + } + + hal2_init_codec(&hal2->dac, hpc3, 0); + hal2_init_codec(&hal2->adc, hpc3, 1); + + /* + * All DMA channel interfaces in HAL2 are designed to operate with + * PBUS programmed for 2 cycles in D3, 2 cycles in D4 and 2 cycles + * in D5. HAL2 is a 16-bit device which can accept both big and little + * endian format. It assumes that even address bytes are on high + * portion of PBUS (15:8) and assumes that HPC3 is programmed to + * accept a live (unsynchronized) version of P_DREQ_N from HAL2. + */ +#define HAL2_PBUS_DMACFG ((0 << HPC3_DMACFG_D3R_SHIFT) | \ + (2 << HPC3_DMACFG_D4R_SHIFT) | \ + (2 << HPC3_DMACFG_D5R_SHIFT) | \ + (0 << HPC3_DMACFG_D3W_SHIFT) | \ + (2 << HPC3_DMACFG_D4W_SHIFT) | \ + (2 << HPC3_DMACFG_D5W_SHIFT) | \ + HPC3_DMACFG_DS16 | \ + HPC3_DMACFG_EVENHI | \ + HPC3_DMACFG_RTIME | \ + (8 << HPC3_DMACFG_BURST_SHIFT) | \ + HPC3_DMACFG_DRQLIVE) + /* + * Ignore what's mentioned in the specification and write value which + * works in The Real World (TM) + */ + hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844; + hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844; + + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, hal2, &hal2_ops); + if (err < 0) { + free_irq(SGI_HPCDMA_IRQ, hal2); + kfree(hal2); + return err; + } + *rchip = hal2; + return 0; +} + +static int __devinit hal2_probe(struct platform_device *pdev) +{ + struct snd_card *card; + struct snd_hal2 *chip; + int err; + + card = snd_card_new(index, id, THIS_MODULE, 0); + if (card == NULL) + return -ENOMEM; + + err = hal2_create(card, &chip); + if (err < 0) { + snd_card_free(card); + return err; + } + snd_card_set_dev(card, &pdev->dev); + + err = hal2_pcm_create(chip); + if (err < 0) { + snd_card_free(card); + return err; + } + err = hal2_mixer_create(chip); + if (err < 0) { + snd_card_free(card); + return err; + } + + strcpy(card->driver, "SGI HAL2 Audio"); + strcpy(card->shortname, "SGI HAL2 Audio"); + sprintf(card->longname, "%s irq %i", + card->shortname, + SGI_HPCDMA_IRQ); + + err = snd_card_register(card); + if (err < 0) { + snd_card_free(card); + return err; + } + platform_set_drvdata(pdev, card); + return 0; +} + +static int __exit hal2_remove(struct platform_device *pdev) +{ + struct snd_card *card = platform_get_drvdata(pdev); + + snd_card_free(card); + platform_set_drvdata(pdev, NULL); + return 0; +} + +static struct platform_driver hal2_driver = { + .probe = hal2_probe, + .remove = __devexit_p(hal2_remove), + .driver = { + .name = "sgihal2", + .owner = THIS_MODULE, + } +}; + +static int __init alsa_card_hal2_init(void) +{ + return platform_driver_register(&hal2_driver); +} + +static void __exit alsa_card_hal2_exit(void) +{ + platform_driver_unregister(&hal2_driver); +} + +module_init(alsa_card_hal2_init); +module_exit(alsa_card_hal2_exit); diff --git a/sound/mips/hal2.h b/sound/mips/hal2.h new file mode 100644 index 000000000000..f19828bc64e0 --- /dev/null +++ b/sound/mips/hal2.h @@ -0,0 +1,245 @@ +#ifndef __HAL2_H +#define __HAL2_H + +/* + * Driver for HAL2 sound processors + * Copyright (c) 1999 Ulf Carlsson <ulfc@bun.falkenberg.se> + * Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/types.h> + +/* Indirect status register */ + +#define H2_ISR_TSTATUS 0x01 /* RO: transaction status 1=busy */ +#define H2_ISR_USTATUS 0x02 /* RO: utime status bit 1=armed */ +#define H2_ISR_QUAD_MODE 0x04 /* codec mode 0=indigo 1=quad */ +#define H2_ISR_GLOBAL_RESET_N 0x08 /* chip global reset 0=reset */ +#define H2_ISR_CODEC_RESET_N 0x10 /* codec/synth reset 0=reset */ + +/* Revision register */ + +#define H2_REV_AUDIO_PRESENT 0x8000 /* RO: audio present 0=present */ +#define H2_REV_BOARD_M 0x7000 /* RO: bits 14:12, board revision */ +#define H2_REV_MAJOR_CHIP_M 0x00F0 /* RO: bits 7:4, major chip revision */ +#define H2_REV_MINOR_CHIP_M 0x000F /* RO: bits 3:0, minor chip revision */ + +/* Indirect address register */ + +/* + * Address of indirect internal register to be accessed. A write to this + * register initiates read or write access to the indirect registers in the + * HAL2. Note that there af four indirect data registers for write access to + * registers larger than 16 byte. + */ + +#define H2_IAR_TYPE_M 0xF000 /* bits 15:12, type of functional */ + /* block the register resides in */ + /* 1=DMA Port */ + /* 9=Global DMA Control */ + /* 2=Bresenham */ + /* 3=Unix Timer */ +#define H2_IAR_NUM_M 0x0F00 /* bits 11:8 instance of the */ + /* blockin which the indirect */ + /* register resides */ + /* If IAR_TYPE_M=DMA Port: */ + /* 1=Synth In */ + /* 2=AES In */ + /* 3=AES Out */ + /* 4=DAC Out */ + /* 5=ADC Out */ + /* 6=Synth Control */ + /* If IAR_TYPE_M=Global DMA Control: */ + /* 1=Control */ + /* If IAR_TYPE_M=Bresenham: */ + /* 1=Bresenham Clock Gen 1 */ + /* 2=Bresenham Clock Gen 2 */ + /* 3=Bresenham Clock Gen 3 */ + /* If IAR_TYPE_M=Unix Timer: */ + /* 1=Unix Timer */ +#define H2_IAR_ACCESS_SELECT 0x0080 /* 1=read 0=write */ +#define H2_IAR_PARAM 0x000C /* Parameter Select */ +#define H2_IAR_RB_INDEX_M 0x0003 /* Read Back Index */ + /* 00:word0 */ + /* 01:word1 */ + /* 10:word2 */ + /* 11:word3 */ +/* + * HAL2 internal addressing + * + * The HAL2 has "indirect registers" (idr) which are accessed by writing to the + * Indirect Data registers. Write the address to the Indirect Address register + * to transfer the data. + * + * We define the H2IR_* to the read address and H2IW_* to the write address and + * H2I_* to be fields in whatever register is referred to. + * + * When we write to indirect registers which are larger than one word (16 bit) + * we have to fill more than one indirect register before writing. When we read + * back however we have to read several times, each time with different Read + * Back Indexes (there are defs for doing this easily). + */ + +/* + * Relay Control + */ +#define H2I_RELAY_C 0x9100 +#define H2I_RELAY_C_STATE 0x01 /* state of RELAY pin signal */ + +/* DMA port enable */ + +#define H2I_DMA_PORT_EN 0x9104 +#define H2I_DMA_PORT_EN_SY_IN 0x01 /* Synth_in DMA port */ +#define H2I_DMA_PORT_EN_AESRX 0x02 /* AES receiver DMA port */ +#define H2I_DMA_PORT_EN_AESTX 0x04 /* AES transmitter DMA port */ +#define H2I_DMA_PORT_EN_CODECTX 0x08 /* CODEC transmit DMA port */ +#define H2I_DMA_PORT_EN_CODECR 0x10 /* CODEC receive DMA port */ + +#define H2I_DMA_END 0x9108 /* global dma endian select */ +#define H2I_DMA_END_SY_IN 0x01 /* Synth_in DMA port */ +#define H2I_DMA_END_AESRX 0x02 /* AES receiver DMA port */ +#define H2I_DMA_END_AESTX 0x04 /* AES transmitter DMA port */ +#define H2I_DMA_END_CODECTX 0x08 /* CODEC transmit DMA port */ +#define H2I_DMA_END_CODECR 0x10 /* CODEC receive DMA port */ + /* 0=b_end 1=l_end */ + +#define H2I_DMA_DRV 0x910C /* global PBUS DMA enable */ + +#define H2I_SYNTH_C 0x1104 /* Synth DMA control */ + +#define H2I_AESRX_C 0x1204 /* AES RX dma control */ + +#define H2I_C_TS_EN 0x20 /* Timestamp enable */ +#define H2I_C_TS_FRMT 0x40 /* Timestamp format */ +#define H2I_C_NAUDIO 0x80 /* Sign extend */ + +/* AESRX CTL, 16 bit */ + +#define H2I_AESTX_C 0x1304 /* AES TX DMA control */ +#define H2I_AESTX_C_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */ +#define H2I_AESTX_C_CLKID_M 0x18 +#define H2I_AESTX_C_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */ +#define H2I_AESTX_C_DATAT_M 0x300 + +/* CODEC registers */ + +#define H2I_DAC_C1 0x1404 /* DAC DMA control, 16 bit */ +#define H2I_DAC_C2 0x1408 /* DAC DMA control, 32 bit */ +#define H2I_ADC_C1 0x1504 /* ADC DMA control, 16 bit */ +#define H2I_ADC_C2 0x1508 /* ADC DMA control, 32 bit */ + +/* Bits in CTL1 register */ + +#define H2I_C1_DMA_SHIFT 0 /* DMA channel */ +#define H2I_C1_DMA_M 0x7 +#define H2I_C1_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */ +#define H2I_C1_CLKID_M 0x18 +#define H2I_C1_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */ +#define H2I_C1_DATAT_M 0x300 + +/* Bits in CTL2 register */ + +#define H2I_C2_R_GAIN_SHIFT 0 /* right a/d input gain */ +#define H2I_C2_R_GAIN_M 0xf +#define H2I_C2_L_GAIN_SHIFT 4 /* left a/d input gain */ +#define H2I_C2_L_GAIN_M 0xf0 +#define H2I_C2_R_SEL 0x100 /* right input select */ +#define H2I_C2_L_SEL 0x200 /* left input select */ +#define H2I_C2_MUTE 0x400 /* mute */ +#define H2I_C2_DO1 0x00010000 /* digital output port bit 0 */ +#define H2I_C2_DO2 0x00020000 /* digital output port bit 1 */ +#define H2I_C2_R_ATT_SHIFT 18 /* right d/a output - */ +#define H2I_C2_R_ATT_M 0x007c0000 /* attenuation */ +#define H2I_C2_L_ATT_SHIFT 23 /* left d/a output - */ +#define H2I_C2_L_ATT_M 0x0f800000 /* attenuation */ + +#define H2I_SYNTH_MAP_C 0x1104 /* synth dma handshake ctrl */ + +/* Clock generator CTL 1, 16 bit */ + +#define H2I_BRES1_C1 0x2104 +#define H2I_BRES2_C1 0x2204 +#define H2I_BRES3_C1 0x2304 + +#define H2I_BRES_C1_SHIFT 0 /* 0=48.0 1=44.1 2=aes_rx */ +#define H2I_BRES_C1_M 0x03 + +/* Clock generator CTL 2, 32 bit */ + +#define H2I_BRES1_C2 0x2108 +#define H2I_BRES2_C2 0x2208 +#define H2I_BRES3_C2 0x2308 + +#define H2I_BRES_C2_INC_SHIFT 0 /* increment value */ +#define H2I_BRES_C2_INC_M 0xffff +#define H2I_BRES_C2_MOD_SHIFT 16 /* modcontrol value */ +#define H2I_BRES_C2_MOD_M 0xffff0000 /* modctrl=0xffff&(modinc-1) */ + +/* Unix timer, 64 bit */ + +#define H2I_UTIME 0x3104 +#define H2I_UTIME_0_LD 0xffff /* microseconds, LSB's */ +#define H2I_UTIME_1_LD0 0x0f /* microseconds, MSB's */ +#define H2I_UTIME_1_LD1 0xf0 /* tenths of microseconds */ +#define H2I_UTIME_2_LD 0xffff /* seconds, LSB's */ +#define H2I_UTIME_3_LD 0xffff /* seconds, MSB's */ + +struct hal2_ctl_regs { + u32 _unused0[4]; + u32 isr; /* 0x10 Status Register */ + u32 _unused1[3]; + u32 rev; /* 0x20 Revision Register */ + u32 _unused2[3]; + u32 iar; /* 0x30 Indirect Address Register */ + u32 _unused3[3]; + u32 idr0; /* 0x40 Indirect Data Register 0 */ + u32 _unused4[3]; + u32 idr1; /* 0x50 Indirect Data Register 1 */ + u32 _unused5[3]; + u32 idr2; /* 0x60 Indirect Data Register 2 */ + u32 _unused6[3]; + u32 idr3; /* 0x70 Indirect Data Register 3 */ +}; + +struct hal2_aes_regs { + u32 rx_stat[2]; /* Status registers */ + u32 rx_cr[2]; /* Control registers */ + u32 rx_ud[4]; /* User data window */ + u32 rx_st[24]; /* Channel status data */ + + u32 tx_stat[1]; /* Status register */ + u32 tx_cr[3]; /* Control registers */ + u32 tx_ud[4]; /* User data window */ + u32 tx_st[24]; /* Channel status data */ +}; + +struct hal2_vol_regs { + u32 right; /* Right volume */ + u32 left; /* Left volume */ +}; + +struct hal2_syn_regs { + u32 _unused0[2]; + u32 page; /* DOC Page register */ + u32 regsel; /* DOC Register selection */ + u32 dlow; /* DOC Data low */ + u32 dhigh; /* DOC Data high */ + u32 irq; /* IRQ Status */ + u32 dram; /* DRAM Access */ +}; + +#endif /* __HAL2_H */ |