summaryrefslogtreecommitdiffstats
path: root/mm
diff options
context:
space:
mode:
authorTejun Heo <tj@kernel.org>2011-07-12 09:45:34 +0200
committerH. Peter Anvin <hpa@linux.intel.com>2011-07-12 21:58:29 -0700
commit1e01979c8f502ac13e3cdece4f38712c5944e6e8 (patch)
treed47c4700bfdcffc3f7f68b19d50c588c20689b48 /mm
parentd0ead157387f19801beb1b419568723b2e9b7c79 (diff)
downloadblackbird-op-linux-1e01979c8f502ac13e3cdece4f38712c5944e6e8.tar.gz
blackbird-op-linux-1e01979c8f502ac13e3cdece4f38712c5944e6e8.zip
x86, numa: Implement pfn -> nid mapping granularity check
SPARSEMEM w/o VMEMMAP and DISCONTIGMEM, both used only on 32bit, use sections array to map pfn to nid which is limited in granularity. If NUMA nodes are laid out such that the mapping cannot be accurate, boot will fail triggering BUG_ON() in mminit_verify_page_links(). On 32bit, it's 512MiB w/ PAE and SPARSEMEM. This seems to have been granular enough until commit 2706a0bf7b (x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too). Apparently, there is a machine which aligns NUMA nodes to 128MiB and has only AMD NUMA but not SRAT. This led to the following BUG_ON(). On node 0 totalpages: 2096615 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3927 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 16405 pages used for memmap HighMem zone: 1853533 pages, LIFO batch:31 BUG: Int 6: CR2 (null) EDI (null) ESI 00000002 EBP 00000002 ESP c1543ecc EBX f2400000 EDX 00000006 ECX (null) EAX 00000001 err (null) EIP c16209aa CS 00000060 flg 00010002 Stack: f2400000 00220000 f7200800 c1620613 00220000 01000000 04400000 00238000 (null) f7200000 00000002 f7200b58 f7200800 c1620929 000375fe (null) f7200b80 c16395f0 00200a02 f7200a80 (null) 000375fe 00000002 (null) Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00181-g2706a0b #17 Call Trace: [<c136b1e5>] ? early_fault+0x2e/0x2e [<c16209aa>] ? mminit_verify_page_links+0x12/0x42 [<c1620613>] ? memmap_init_zone+0xaf/0x10c [<c1620929>] ? free_area_init_node+0x2b9/0x2e3 [<c1607e99>] ? free_area_init_nodes+0x3f2/0x451 [<c1601d80>] ? paging_init+0x112/0x118 [<c15f578d>] ? setup_arch+0x791/0x82f [<c15f43d9>] ? start_kernel+0x6a/0x257 This patch implements node_map_pfn_alignment() which determines maximum internode alignment and update numa_register_memblks() to reject NUMA configuration if alignment exceeds the pfn -> nid mapping granularity of the memory model as determined by PAGES_PER_SECTION. This makes the problematic machine boot w/ flatmem by rejecting the NUMA config and provides protection against crazy NUMA configurations. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110712074534.GB2872@htj.dyndns.org LKML-Reference: <20110628174613.GP478@escobedo.osrc.amd.com> Reported-and-Tested-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Conny Seidel <conny.seidel@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Diffstat (limited to 'mm')
-rw-r--r--mm/page_alloc.c54
1 files changed, 54 insertions, 0 deletions
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 4e8985acdab8..9119faae6e6a 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4585,6 +4585,60 @@ void __init sort_node_map(void)
cmp_node_active_region, NULL);
}
+/**
+ * node_map_pfn_alignment - determine the maximum internode alignment
+ *
+ * This function should be called after node map is populated and sorted.
+ * It calculates the maximum power of two alignment which can distinguish
+ * all the nodes.
+ *
+ * For example, if all nodes are 1GiB and aligned to 1GiB, the return value
+ * would indicate 1GiB alignment with (1 << (30 - PAGE_SHIFT)). If the
+ * nodes are shifted by 256MiB, 256MiB. Note that if only the last node is
+ * shifted, 1GiB is enough and this function will indicate so.
+ *
+ * This is used to test whether pfn -> nid mapping of the chosen memory
+ * model has fine enough granularity to avoid incorrect mapping for the
+ * populated node map.
+ *
+ * Returns the determined alignment in pfn's. 0 if there is no alignment
+ * requirement (single node).
+ */
+unsigned long __init node_map_pfn_alignment(void)
+{
+ unsigned long accl_mask = 0, last_end = 0;
+ int last_nid = -1;
+ int i;
+
+ for_each_active_range_index_in_nid(i, MAX_NUMNODES) {
+ int nid = early_node_map[i].nid;
+ unsigned long start = early_node_map[i].start_pfn;
+ unsigned long end = early_node_map[i].end_pfn;
+ unsigned long mask;
+
+ if (!start || last_nid < 0 || last_nid == nid) {
+ last_nid = nid;
+ last_end = end;
+ continue;
+ }
+
+ /*
+ * Start with a mask granular enough to pin-point to the
+ * start pfn and tick off bits one-by-one until it becomes
+ * too coarse to separate the current node from the last.
+ */
+ mask = ~((1 << __ffs(start)) - 1);
+ while (mask && last_end <= (start & (mask << 1)))
+ mask <<= 1;
+
+ /* accumulate all internode masks */
+ accl_mask |= mask;
+ }
+
+ /* convert mask to number of pages */
+ return ~accl_mask + 1;
+}
+
/* Find the lowest pfn for a node */
static unsigned long __init find_min_pfn_for_node(int nid)
{
OpenPOWER on IntegriCloud