summaryrefslogtreecommitdiffstats
path: root/include/net
diff options
context:
space:
mode:
authorShaun Pereira <spereira@tusc.com.au>2005-06-22 22:16:17 -0700
committerDavid S. Miller <davem@davemloft.net>2005-06-22 22:16:17 -0700
commitebc3f64b864fc16a594c2e63bf55a55c7d42084b (patch)
tree95040f32ad5902051527b91966118e565d48865b /include/net
parentcb65d506c34c86df5bcef939ce5a8666a451bd8b (diff)
downloadblackbird-op-linux-ebc3f64b864fc16a594c2e63bf55a55c7d42084b.tar.gz
blackbird-op-linux-ebc3f64b864fc16a594c2e63bf55a55c7d42084b.zip
[X25]: Fast select with no restriction on response
This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/net')
-rw-r--r--include/net/x25.h6
1 files changed, 4 insertions, 2 deletions
diff --git a/include/net/x25.h b/include/net/x25.h
index 9dd70dd4a9b7..8b39b98876e8 100644
--- a/include/net/x25.h
+++ b/include/net/x25.h
@@ -79,6 +79,8 @@ enum {
#define X25_DEFAULT_PACKET_SIZE X25_PS128 /* Default Packet Size */
#define X25_DEFAULT_THROUGHPUT 0x0A /* Deafult Throughput */
#define X25_DEFAULT_REVERSE 0x00 /* Default Reverse Charging */
+#define X25_DENY_ACCPT_APPRV 0x01 /* Default value */
+#define X25_ALLOW_ACCPT_APPRV 0x00 /* Control enabled */
#define X25_SMODULUS 8
#define X25_EMODULUS 128
@@ -94,7 +96,7 @@ enum {
#define X25_FAC_CLASS_C 0x80
#define X25_FAC_CLASS_D 0xC0
-#define X25_FAC_REVERSE 0x01
+#define X25_FAC_REVERSE 0x01 /* also fast select */
#define X25_FAC_THROUGHPUT 0x02
#define X25_FAC_PACKET_SIZE 0x42
#define X25_FAC_WINDOW_SIZE 0x43
@@ -135,7 +137,7 @@ struct x25_sock {
struct x25_address source_addr, dest_addr;
struct x25_neigh *neighbour;
unsigned int lci, cudmatchlength;
- unsigned char state, condition, qbitincl, intflag;
+ unsigned char state, condition, qbitincl, intflag, accptapprv;
unsigned short vs, vr, va, vl;
unsigned long t2, t21, t22, t23;
unsigned short fraglen;
OpenPOWER on IntegriCloud