Merge branch 'master' into upstream

6 files changed, 22 insertions, 5 deletions

diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h
index e7ef497417bb..b6952534a4e1 100644
--- a/include/asm-arm/arch-pxa/idp.h
+++ b/include/asm-arm/arch-pxa/idp.h
@@ -15,7 +15,6 @@
  *             Changes for 2.6 kernel.
  */
 
-#include <linux/config.h>
 
 /*
  * Note: this file must be safe to include in assembly files
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
index 67af238a8f8e..f3bc70eee35b 100644
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -10,7 +10,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/config.h>
 
 #ifdef CONFIG_PXA27x
 #define PXA_IRQ_SKIP	0
diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h
index 6b5ac5144e70..4d6a40315764 100644
--- a/include/asm-arm/arch-pxa/poodle.h
+++ b/include/asm-arm/arch-pxa/poodle.h
@@ -31,6 +31,7 @@
 #define POODLE_GPIO_CF_CD		(14)
 #define POODLE_GPIO_CF_STSCHG		(14)
 #define POODLE_GPIO_SD_PWR		(33)
+#define POODLE_GPIO_SD_PWR1		(3)
 #define POODLE_GPIO_nSD_CLK		(6)
 #define POODLE_GPIO_nSD_WP		(7)
 #define POODLE_GPIO_nSD_INT		(8)
@@ -42,6 +43,7 @@
 #define POODLE_GPIO_BYPASS_ON		(36)
 #define POODLE_GPIO_CHRG_ON		(38)
 #define POODLE_GPIO_CHRG_FULL		(16)
+#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
 
 /* PXA GPIOs */
 #define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
@@ -68,4 +70,6 @@
 #define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
 #define POODLE_SCOOP_IO_OUT	( 0 )
 
+extern struct platform_device poodle_locomo_device;
+
 #endif /* __ASM_ARCH_POODLE_H  */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index c8f53a71c076..9f83f4adfbf3 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -13,7 +13,6 @@
 #ifndef __PXA_REGS_H
 #define __PXA_REGS_H
 
-#include <linux/config.h>
 
 /*
  * PXA Chip selects
@@ -1626,7 +1625,7 @@
 #define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
 #define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
 #define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(c) ((x) - 1)	/* Time slots per frame [1..8] */
+#define SSCR0_SlotsPerFrm(x) ((x) - 1)	/* Time slots per frame [1..8] */
 #define SSCR0_ADC	(1 << 30)	/* Audio clock select */
 #define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
 #endif
@@ -1707,6 +1706,10 @@
 #if defined (CONFIG_PXA27x)
 #define SSTO_P1		__REG(0x41000028)  /* SSP Port 1 Time Out Register */
 #define SSPSP_P1	__REG(0x4100002C)  /* SSP Port 1 Programmable Serial Protocol */
+#define SSTSA_P1	__REG(0x41000030)  /* SSP Port 1 Tx Timeslot Active */
+#define SSRSA_P1	__REG(0x41000034)  /* SSP Port 1 Rx Timeslot Active */
+#define SSTSS_P1	__REG(0x41000038)  /* SSP Port 1 Timeslot Status */
+#define SSACD_P1	__REG(0x4100003C)  /* SSP Port 1 Audio Clock Divider */
 #define SSCR0_P2	__REG(0x41700000)  /* SSP Port 2 Control Register 0 */
 #define SSCR1_P2	__REG(0x41700004)  /* SSP Port 2 Control Register 1 */
 #define SSSR_P2		__REG(0x41700008)  /* SSP Port 2 Status Register */
@@ -1714,6 +1717,10 @@
 #define SSDR_P2		__REG(0x41700010)  /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
 #define SSTO_P2		__REG(0x41700028)  /* SSP Port 2 Time Out Register */
 #define SSPSP_P2	__REG(0x4170002C)  /* SSP Port 2 Programmable Serial Protocol */
+#define SSTSA_P2	__REG(0x41700030)  /* SSP Port 2 Tx Timeslot Active */
+#define SSRSA_P2	__REG(0x41700034)  /* SSP Port 2 Rx Timeslot Active */
+#define SSTSS_P2	__REG(0x41700038)  /* SSP Port 2 Timeslot Status */
+#define SSACD_P2	__REG(0x4170003C)  /* SSP Port 2 Audio Clock Divider */
 #define SSCR0_P3	__REG(0x41900000)  /* SSP Port 3 Control Register 0 */
 #define SSCR1_P3	__REG(0x41900004)  /* SSP Port 3 Control Register 1 */
 #define SSSR_P3		__REG(0x41900008)  /* SSP Port 3 Status Register */
@@ -1721,6 +1728,10 @@
 #define SSDR_P3		__REG(0x41900010)  /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
 #define SSTO_P3		__REG(0x41900028)  /* SSP Port 3 Time Out Register */
 #define SSPSP_P3	__REG(0x4190002C)  /* SSP Port 3 Programmable Serial Protocol */
+#define SSTSA_P3	__REG(0x41900030)  /* SSP Port 3 Tx Timeslot Active */
+#define SSRSA_P3	__REG(0x41900034)  /* SSP Port 3 Rx Timeslot Active */
+#define SSTSS_P3	__REG(0x41900038)  /* SSP Port 3 Timeslot Status */
+#define SSACD_P3	__REG(0x4190003C)  /* SSP Port 3 Audio Clock Divider */
 #else /* PXA255 (only port 2) and PXA26x ports*/
 #define SSTO_P1		__REG(0x41000028)  /* SSP Port 1 Time Out Register */
 #define SSPSP_P1	__REG(0x4100002C)  /* SSP Port 1 Programmable Serial Protocol */
@@ -1747,6 +1758,10 @@
 #define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL))
 #define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL))
 #define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL))
+#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL))
+#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL))
+#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL))
+#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL))
 
 /*
  * MultiMediaCard (MMC) controller
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
index 840a46bfbc54..1d56a3ef89fd 100644
--- a/include/asm-arm/arch-pxa/system.h
+++ b/include/asm-arm/arch-pxa/system.h
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <asm/proc-fns.h>
 #include "hardware.h"
 #include "pxa-regs.h"
 
diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h
index aa125ec56a32..2473bb51d0a6 100644
--- a/include/asm-arm/arch-pxa/timex.h
+++ b/include/asm-arm/arch-pxa/timex.h
@@ -10,7 +10,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/config.h>
 
 #if defined(CONFIG_PXA25x)
 /* PXA250/210 timer base */